出芽短梗霉菌株CBS591．75和DSM2404发酵生产聚苹果酸的研究

研究了出芽短梗霉蕾株CBS591.75和DSM2404在2L发酵罐中发酵生产聚苹果酸的过程。并以CBS591．75为菌种进行了20L规模的初步放大试验。结果表明,发酵过程可以分为3个阶段,第一阶段从接种开始。到发酵液的pH上升到最高点并开始下降为止．这一阶段中细胞缓慢增长,没有聚苹果酸产生;第二阶段以pH迅速下降和聚苹果酸大量产生为特征。这一阶段中聚苹果酸的产生与细胞增长相平行;在第三阶段中,聚苹果酸产生速度减慢．pH趋于稳定。试验结果还表明。菌株CBS591．75产生聚苹果酸的能力大于DSM2404,发酵结束时,前者聚苹果酸的产量为6．9g／L,而后者为5．4g／L。CBS591．75菌种在20L规模的初步放大试验表明,发酵144h后发酵液中聚苹果酸浓度为8．Og／L,稍高于2L发酵罐的结果,为今后的放大提供了依据和参考。     

Extractive fermentation for butyric acid production from glucose by Clostridium tyrobutyricum

A novel extractive fermentation for butyric acid production from glucose, using immobilized cells of Clostridium tyrobutyricum in a fibrous bed bioreactor, was developed by using 10% (v/v) Alamine 336 in oleyl alcohol as the extractant contained in a hollow-fiber membrane extractor for selective removal of butyric acid from the fermentation broth. The extractant was simultaneously regenerated by stripping with NaOH in a second membrane extractor. The fermentation pH was self-regulated by a balance between acid production and removal by extraction, and was kept at approximately pH 5.5 throughout the study. Compared with conventional fermentation, extractive fermentation resulted in a much higher product concentration (>300 g/L) and product purity (91%). It also resulted in higher reactor productivity (7.37 g/L. h) and butyric acid yield (0.45 g/g). Without on-line extraction to remove the acid products, at the optimal pH of 6.0, the final butyric acid concentration was only approximately 43.4 g/L, butyric acid yield was 0.423 g/g, and reactor productivity was 6.77 g/L. h. These values were much lower at pH 5.5: 20.4 g/L, 0.38 g/g, and 5.11 g/L. h, respectively. The improved performance for extractive fermentation can be attributed to the reduced product inhibition by selective removal of butyric acid from the fermentation broth. The solvent was found to be toxic to free cells in suspension, but not harmful to cells immobilized in the fibrous bed. The process was stable and provided consistent long-term performance for the entire 2-week period of study.     

Lactic acid production from sugarcane bagasse hydrolysates by Lactobacillus pentosus: Integrating xylose and glucose fermentation

Lactic acid, traditionally obtained through fermentation process, presents numerous applications in different industrial segments, including production of biodegradable polylactic acid (PLA). Development of low cost substrate fermentations could improve economic viability of lactic acid production, through the use of agricultural residues as lignocellulosic biomass. Studies regarding the use of sugarcane bagasse hydrolysates for lactic acid production by Lactobacillus spp. are reported. First, five strains of Lactobacillus spp. were investigated for one that had the ability to consume xylose efficiently. Subsequently, biomass fractionation was performed by dilute acid and alkaline pretreatments, and the hemicellulose hydrolysate (HH) fermentability by the selected strain was carried out in bioreactor. Maximum lactic acid concentration and productivity achieved in HH batch were 42.5 g/L and 1.02 g/L h, respectively. Hydrolyses of partially delignified cellulignin (PDCL) by two different enzymatic cocktails were compared. Finally, fermentation of HH and PDCL hydrolysate together was carried out in bioreactor in a hybrid process: saccharification and co-fermentation with an initial enzymatic hydrolysis. The high fermentability of these process herein developed was demonstrated by the total consumption of xylose and glucose by Lactobacillus pentosus, reaching at 65.0 g/L of lactic acid, 0.93 g/g of yield, and 1.01 g/L h of productivity. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2718, 2019     

Metabolic engineering of a laboratory‐evolved Thermobifida fusca muC strain for malic acid production on cellulose and minimal treated lignocellulosic biomass

Malic acid is mainly used as an acidulant and taste enhancer in the beverage and food industry. Previously, a mutant strain Thermobifida fusca muC, obtained by adaptive evolution was found to accumulate malic acid on cellulose with low yield. In this study, the malic acid synthesis pathway in T. fusca muC was confirmed to be from phosphoenolpyruvate to oxaloacetate, followed by reduction of oxaloacetate to malate. To increase the yield of malic acid by the muC strain significantly, the carbon flux from pyruvate was redirected to oxaloacetate by expressing an exogenous pyruvate carboxylase (PCx) gene from Corynebacterium glutamicum ATCC 13032 in the chromosome of T. fusca muC‐16. The yield of malic acid in the engineered strain muC‐16 was increased by 47.9% compared to the parent strain muC. The muC‐16 strain was then grown on ～100 g/L cellulose and the highest titer of malic acid was 62.76 g/L by batch fermentation. T. fusca muC‐16 strain converted milled corn stover to malic acid with the highest titer of 21.47 g/L with minimal treatment. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:14–20, 2016     

Enhanced poly(L-malic acid) production from pretreated cane molasses by Aureobasidium pullulans in fed-batch fermentation

Poly(L-malic acid) (PMA) is a natural polyester with many attractive properties for biomedical application. However, the cost of PMA production is high when glucose is used as a carbon source. To solve this problem, cane molasses as a low-cost feedstock was applied for the production of PMA. Six pretreatment methods were applied to cane molasses before fermentation. Pretreatment with combined tricalcium phosphate, potassium ferrocyanide, and sulfuric acid (TPFSA) removed significant amounts of metal ions from cane molasses. The PMA concentration increased from 5.4?g/L (untreated molasses) to 36.9?g/L (TPFSA-pretreated molasses) after fermentation in shake flasks. A fed-batch fermentation strategy was then developed. In this method, TPFSA-pretreated cane molasses solution was continuously fed into the fermentor to maintain the total sugar concentration at 20?g/L. This technique generated approximately 95.4?g/L PMA with a productivity of 0.57?g/L/hr. The present study indicated that fed-batch fermentation using pretreated cane molasses is a feasible technique for producing high amounts of PMA.     

A new process for the continuous production of succinic acid from glucose at high yield, titer, and productivity

A novel three stages continuous fermentation process for the bioproduction of succinic acid at high concentration, productivity and yield using A. succiniciproducens was developed. This process combined an integrated membrane-bioreactor-electrodialysis system. An energetic characterization of A. succiniciproducens during anaerobic cultured in a cell recycle bioreactor was done first. The very low value of Y(ATP) obtained suggests that an ATP dependent mechanism of succinate export is present in A. succiniciproducens. Under the best culture conditions, biomass concentration and succinate volumetric productivity reach values of 42 g/L and 14.8 g/L.h. These values are respectively 28 and 20 times higher compared to batch cultures done in our laboratory. To limit end-products inhibition on growth, a mono-polar electrodialysis pilot was secondly coupled to the cell recycle bioreactor. This system allowed to continuously remove succinate and acetate from the permeate and recycle an organic acids depleted solution in the reactor. The integrated membrane-bioreactor-electrodialysis process produced a five times concentrated succinate solution (83 g/L) compared to the cell recycle reactor system, at a high average succinate yield of 1.35 mol/mol and a slightly lower volumetric productivity of 10.4 g/L.h. The process combined maximal production yield to high productivity and titer and could be economically viable for the development of a biological route for succinic acid production.     

Cofactor and CO2 donor regulation involved in reductive routes for polymalic acid production by Aureobasidium pullulans CCTCC M2012223

Polymalic acid (PMA) is a water-soluble polyester with many attractive properties for biomedical application. Its monomer l-malic acid is widely used in the food industry and also a potential C4 platform chemical. Cofactor and CO₂ donor involved in the reductive routes were investigated for PMA production by Aureobasidium pullulans. Biotin as the key cofactor of pyruvate carboxylase was favor for the PMA biosynthesis. Na₂CO₃ as CO₂ donor can obviously improved PMA titer when compared with no CO₂ supplier NaOH, and also exhibit more advantages than the other donor CaCO₃ because of its water-soluble characteristic. A combinational process with addition of biotin 70 mg/L and Na₂CO₃ as the CO₂ donor was scaled-up in 50 L fermentor, achieving the high product 34.3 g/L of PMA and productivity of 0.41 g/L h. This process provides an efficient and economical way for PMA and malic acid production, and is promising for industrial application.     

High-rate continuous production of lactic acid by Lactobacillus rhamnosus in a two-stage membrane cell-recycle bioreactor

It is important to produce L(+)-lactic acid at the lowest cost possible for lactic acid to become a candidate monomer material for promising biodegradable polylactic acid. In an effort to develop a high-rate bioreactor that provides high productivity along with a high concentration of lactic acid, the performance of membrane cell-recycle bioreactor (MCRB) was investigated via experimental studies and simulation optimization. Due to greatly increased cell density, high lactic acid productivity, 21.6 g L(-1) h(-1), was obtained in the reactor. The lactic acid concentration, however, could not be increased higher than 83 g/L. When an additional continuous stirred tank reactor (CSTR) was attached next to the MCRB a higher lactic acid concentration of 87 g/L was produced at significant productivity expense. When the two MCRBs were connected in series, 92 g/L lactic acid could be produced with a productivity of 57 g L(-1) h(-1), the highest productivity among the reports of L(+)-lactic acid that obtained lactic acid concentration higher than 85 g/L using glucose substrate. Additionally, the investigation of lactic acid fermentation kinetics resulted in a successful model that represents the characteristics of lactic acid fermentation by Lactobacillus rhamnosus. The model was found to be applicable to most of the existing data with MCRBs and was in good agreement with Levenspiel's product-inhibition model, and the Luedeking-Piret equation for product-formation kinetics appeared to be effective in representing the fermentation kinetics. There was a distinctive difference in the production potential of cells (cell-density-related parameter in Luedeking-Piret equation) as lactic acid concentration increases over 55 g/L, and this finding led to a more precise estimation of bioreactor performance.     

A novel recycle batch immobilized cell bioreactor for propionate production from whey lactose

Recycle batch fermentations using immobilized cells of Propionibacterium acidipropionici were studied for propionate production from whey permeate, de-lactose whey permeate, and acid whey. Cells were immobilized in a spirally wound fibrous sheet packed in a 0.5-L column reactor, which was connected to a 5-L stirred tank batch fermentor with recirculation. The immobilized cells bioreactor served as a breeder for these recycle batch fermentations. High fermentation rates and conversions were obtained with these whey media without nutrient supplementation. It took approximately 55 h to ferment whey permeate containing approximately 45 g/L lactose to approximately 20 g/L propionic acid. Higher propionate concentrations can be produced with various concentrated whey media containing more lactose. The highest propionic acid concentration obtained with the recycle batch reactor was 65 g/L, which is much higher than the normal maximum concentration of 35 to 45 g/L reported in the literature. The volumetric productivity ranged from 0.22 g/L . h to 0.47 g/L . h, depending on the propionate concentration and whey medium used. The corresponding specific cell productivity was 0.033 to 0.07 g/L . g cell. The productivity increased to 0.68 g/L . h when whey permeate was supplemented with 1% (w/v) yeast extract. Compared with conventional batch fermentation, the recycle batch fermentation with the immobilized cell bioreactor allows faster fermentation, produces a higher concentration of product, and can be run continually without significant downtime. The process also produced similar fermentation results with nonsterile whey media. (c) 1995 John Wiley & Sons, Inc.     

Efficient production of butyric acid from Jerusalem artichoke by immobilized Clostridium tyrobutyricum in a fibrous-bed bioreactor

Butyric acid is an important specialty chemical with wide industrial applications. The feasible large-scale fermentation for the economical production of butyric acid requires low-cost substrate and efficient process. In the present study, butyric acid production by immobilized Clostridium tyrobutyricum was successfully performed in a fibrous-bed bioreactor using Jerusalem artichoke as the substrate. Repeated-batch fermentation was carried out to produce butyric acid with a high butyrate yield (0.44 g/g), high productivity (2.75 g/L/h) and a butyrate concentration of 27.5 g/L. Furthermore, fed-batch fermentation using sulfuric acid pretreated Jerusalem artichoke hydrolysate resulted in a high butyric acid concentration of 60.4 g/L, with the yield of 0.38 g/g and the selectivity of ∼85.1 (85.1 g butyric acid/g acetic acid). Thus, the production of butyric acid from Jerusalem artichoke on a commercial scale could be achieved based on the system developed in this work.     

Multi-stage high cell continuous fermentation for high productivity and titer

We carried out the first simulation on multi-stage continuous high cell density culture (MSC-HCDC) to show that the MSC-HCDC can achieve batch/fed-batch product titer with much higher productivity to the fed-batch productivity using published fermentation kinetics of lactic acid, penicillin and ethanol. The system under consideration consists of n-serially connected continuous stirred-tank reactors (CSTRs) with either hollow fiber cell recycling or cell immobilization for high cell-density culture. In each CSTR substrate supply and product removal are possible. Penicillin production is severely limited by glucose metabolite repression that requires multi-CSTR glucose feeding. An 8-stage C-HCDC lactic acid fermentation resulted in 212.9 g/L of titer and 10.6 g/L/h of productivity, corresponding to 101 and 429% of the comparable lactic acid fed-batch, respectively. The penicillin production model predicted 149% (0.085 g/L/h) of productivity in 8-stage C-HCDC with 40 g/L of cell density and 289% of productivity (0.165 g/L/h) in 7-stage C-HCDC with 60 g/L of cell density compared with referring batch cultivations. A 2-stage C-HCDC ethanol experimental run showed 107% titer and 257% productivity of the batch system having 88.8 g/L of titer and 3.7 g/L/h of productivity. MSC-HCDC can give much higher productivity than batch/fed-batch system, and yield a several percentage higher titer as well. The productivity ratio of MSC-HCDC over batch/fed-batch system is given as a multiplication of system dilution rate of MSC-HCDC and cycle time of batch/fed-batch system. We suggest MSC-HCDC as a new production platform for various fermentation products including monoclonal antibody.     

Acetic acid production from lactose by an anaerobic thermophilic coculture immobilized in a fibrous-bed bioreactor

An anaerobic thermophilic coculture consisting of a heterofermentative bacterium (Clostridium thermolacticum) and a homoacetogen (Moorella thermoautotrophica) was developed for acetic acid production from lactose and milk permeate. The fermentation kinetics with free cells in conventional fermentors and immobilized cells in a recycle batch fibrous-bed bioreactor were studied. The optimal conditions for the cocultured fermentation were found to be 58 degrees C and pH 6.4. In the free-cell fermentation, C. thermolacticum converted lactose to acetate, ethanol, lactate, H(2) and CO(2), and the homoacetogen then converted lactate, H(2), and CO(2) to acetate. The overall acetate yield from lactose ranged from 0.46 to 0.65 g/g lactose fermented, depending on the fermentation conditions. In contrast, no ethanol was produced in the immobilized-cell fermentation, and the overall acetate yield from lactose increased to 0.8-0.96 g/g lactose fermented. The fibrous-bed bioreactor also gave a higher final acetate concentration (up to 25. 5 g/L) and reactor productivity (0.18-0.54 g/L/h) as compared to those from the free-cell fermentation (final acetate concentration, 15 g/L; productivity, 0.06-0.08 g/L/h). The superior performance of the fibrous-bed bioreactor was attributed to the high cell density (20 g/L) immobilized in the fibrous-bed and adaptation of C. thermolacticum cells to tolerate a higher acetate concentration. The effects of yeast extract and trypticase as nutrient supplements on the fermentation were also studied. For the free-cell fermentation, nutrient supplementation was necessary for the bacteria to grow in milk permeate. For the immobilized-cell fermentation, plain milk permeate gave a high acetate yield (0.96 g/g), although the reactor productivity was lower than those with nutrient supplementation. Balanced growth and fermentation activities between the two bacteria in the coculture are important to the quantitative conversion of lactose to acetic acid. Lactate and hydrogen produced by C. thermolacticum must be timely converted to acetic acid by the homoacetogen to avoid inhibition by these metabolites.     

Production of L(+)-lactic acid from glucose and starch by immobilized cells of Rhizopus oryzae in a rotating fibrous bed bioreactor

A rotating fibrous-bed bioreactor (RFB) was developed for fermentation to produce L(+)-lactic acid from glucose and cornstarch by Rhizopus oryzae. Fungal mycelia were immobilized on cotton cloth in the RFB for a prolonged period to study the fermentation kinetics and process stability. The pH and dissolved oxygen concentration (DO) were found to have significant effects on lactic acid productivity and yield, with pH 6 and 90% DO being the optimal conditions. A high lactic acid yield of 90% (w/w) and productivity of 2.5 g/L.h (467 g/h.m(2)) was obtained from glucose in fed-batch fermentation. When cornstarch was used as the substrate, the lactic acid yield was close to 100% (w/w) and the productivity was 1.65 g/L.h (300 g/h.m(2)). The highest concentration of lactic acid achieved in these fed-batch fermentations was 127 g/L. The immobilized-cells fermentation in the RFB gave a virtually cell-free fermentation broth and provided many advantages over conventional fermentation processes, especially those with freely suspended fungal cells. Without immobilization with the cotton cloth, mycelia grew everywhere in the fermentor and caused serious problems in reactor control and operation and consequently the fermentation was poor in lactic acid production. Oxygen transfer in the RFB was also studied and the volumetric oxygen transfer coefficients under various aeration and agitation conditions were determined and then used to estimate the oxygen transfer rate and uptake rate during the fermentation. The results showed that the oxygen uptake rate increased with increasing DO, indicating that oxygen transfer was limited by the diffusion inside the mycelial layer.     

代谢工程改造大肠杆菌合成己二酸

己二酸是一种具有重要应用价值的二元羧酸,是合成尼龙-66的关键前体。目前,生物法生产己二酸存在生产周期长、生产效率低的问题。本研究选择一株野生型高产琥珀酸菌株大肠杆菌(Escherichia coli) FMME N-2为底盘细胞,首先通过引入逆己二酸降解途径的关键酶,成功构建了可合成0.34 g/L己二酸的E. coli JL00菌株;接着,对合成路径限速酶进行表达优化,使E. coli JL01菌株在摇瓶发酵条件下产量达到0.87 g/L;随后,通过敲除sucD基因、过表达acs基因和突变lpd基因的组合策略平衡己二酸合成前体的供应,优化菌株E. coli JL12己二酸产量进一步提升至1.51 g/L;最后,在5 L发酵罐上对己二酸发酵工艺进行优化。工程菌株经72 h分批补料发酵,己二酸的产量达到22.3 g/L,转化率为0.25 g/g,生产强度为0.31 g/(L·h),具备了一定的应用潜力。本研究可为包括己二酸在内的多种二元羧酸细胞工厂的构建提供理论依据和技术基础。     

High-titer n-butanol production by clostridium acetobutylicum JB200 in fed-batch fermentation with intermittent gas stripping

Acetone–butanol–ethanol (ABE) fermentation with a hyper‐butanol producing Clostridium acetobutylicum JB200 was studied for its potential to produce a high titer of butanol that can be readily recovered with gas stripping. In batch fermentation without gas stripping, a final butanol concentration of 19.1 g/L was produced from 86.4 g/L glucose consumed in 78 h, and butanol productivity and yield were 0.24 g/L h and 0.21 g/g, respectively. In contrast, when gas stripping was applied intermittently in fed‐batch fermentation, 172 g/L ABE (113.3 g/L butanol, 49.2 g/L acetone, 9.7 g/L ethanol) were produced from 474.9 g/L glucose in six feeding cycles over 326 h. The overall productivity and yield were 0.53 g/L h and 0.36 g/g for ABE and 0.35 g/L h and 0.24 g/g for butanol, respectively. The higher productivity was attributed to the reduced butanol concentration in the fermentation broth by gas stripping that alleviated butanol inhibition, whereas the increased butanol yield could be attributed to the reduced acids accumulation as most acids produced in acidogenesis were reassimilated by cells for ABE production. The intermittent gas stripping produced a highly concentrated condensate containing 195.9 g/L ABE or 150.5 g/L butanol that far exceeded butanol solubility in water. After liquid–liquid demixing or phase separation, a final product containing ～610 g/L butanol, ～40 g/L acetone, ～10 g/L ethanol, and no acids was obtained. Compared to conventional ABE fermentation, the fed‐batch fermentation with intermittent gas stripping has the potential to reduce at least 90% of energy consumption and water usage in n‐butanol production from glucose. Biotechnol. Bioeng. 2012; 109: 2746–2756. © 2012 Wiley Periodicals, Inc.     

采用玉米秸秆水解糖和玉米浆发酵生产丁二酸

研究了以玉米秸秆水解糖为碳源,不同氮源条件下琥珀酸放线杆菌Actinobacillus succinogenesSF-9的丁二酸发酵产酸能力。结果表明玉米浆可以替代酵母膏作为丁二酸发酵的廉价氮源。厌氧摇瓶丁二酸发酵单因素试验,得到在初糖浓度50 g/L时,玉米浆的较佳用量为20 g/L。在5 L搅拌罐上,考察了不同初始玉米秸秆水解糖浓度对A.succinogenes SF-9发酵生产丁二酸的影响,结果显示高初始秸秆糖浓度对琥珀酸放线杆菌的生长有抑制作用。采用补料分批发酵,发酵60 h丁二酸的产量达到42.7g/L,丁二酸产率82.7%,生产强度0.81 g/(L·h)。丁二酸的产量和生产强度较分批发酵有明显提高。     

Bioethanol from fermentation of cassava pulp in a fibrous-bed bioreactor using immobilized Δldh, a genetically engineered Thermoanaerobacterium aotearoense

There is an increasing worldwide interest in bioethanol production from agricultural, industrial, and urban residues for both ecological and economic reasons. The acid hydrolysis of cassava pulp to reducing sugars and their fermentation to ethanol were evaluated in a fibrousbed bioreactor with immobilized Δldh, a genetically engineered Thermoanaerobacterium aotearoense. A maximum yield of total reducing sugars of 53.5% was obtained after 8 h of hydrolysis at 85oC in 0.4 mol/L hydrochloric acid with a solid-to-liquid ratio of 1:20, which was optimized by using an orthogonal design based on preliminary experiments. In the FBB, the fed-batch fermentation, using glucose as the sole carbon source, gave a maximum ethanol production of 38.3 g/L with a yield of 0.364 g/g in 100 h; whereas the fed-batch fermentation, using xylose as the sole carbon source, gave 34.1 g/L ethanol with a yield of 0.342 g/g in 135 h. When cassava pulp hydrolysate was used as a carbon source, 39.1 g/L ethanol with a yield of 0.123 g/g cassava pulp in185 h was observed, using the fed-batch fermentation model. In addition, for repeated batch fermentation of cassava pulp hydrolysate carried out in the fibrous-bed bioreactor, long-term operation with high ethanol yield and volumetric productivity were achieved. The above results show that the acid hydrolysate of cassava pulp can be used for ethanol production in a fibrous-bed bioreactor, although some inhibition phenomena were observed during the process of fermentation.     

Enhanced butyric acid tolerance and bioproduction by Clostridium tyrobutyricum immobilized in a fibrous bed bioreactor

Repeated fed‐batch fermentation of glucose by Clostridium tyrobutyricum immobilized in a fibrous bed bioreactor (FBB) was successfully employed to produce butyric acid at a high final concentration as well as to adapt a butyric‐acid‐tolerant strain. At the end of the eighth fed‐batch fermentation, the butyric acid concentration reached 86.9 ± 2.17 g/L, which to our knowledge is the highest butyric acid concentration ever produced in the traditional fermentation process. To understand the mechanism and factors contributing to the improved butyric acid production and enhanced acid tolerance, adapted strains were harvested from the FBB and characterized for their physiological properties, including specific growth rate, acid‐forming enzymes, intracellular pH, membrane‐bound ATPase and cell morphology. Compared with the original culture used to seed the bioreactor, the adapted culture showed significantly reduced inhibition effects of butyric acid on specific growth rate, cellular activities of butyric‐acid‐forming enzyme phosphotransbutyrylase (PTB) and ATPase, together with elevated intracellular pH, and elongated rod morphology. Biotechnol. Bioeng. 2011; 108:31–40. © 2010 Wiley Periodicals, Inc.