Plant Lesions Promote the Rapid Multiplication of Escherichia coli O157:H7 on Postharvest Lettuce

Several outbreaks of Escherichia coli O157:H7 infections have been associated with minimally processed leafy vegetables in the United States. Harvesting and processing cause plant tissue damage. In order to assess the role of plant tissue damage in the contamination of leafy greens with E. coli O157:H7, the effect of mechanical, physiological, and plant disease-induced lesions on the growth of this pathogen on postharvest romaine lettuce was investigated. Within only 4 h after inoculation, the population sizes of E. coli O157:H7 increased 4.0-, 4.5-, and 11.0-fold on lettuce leaves that were mechanically bruised, cut into large pieces, and shredded into multiple pieces, respectively. During the same time, E. coli O157:H7 population sizes increased only twofold on leaves that were left intact after harvest. Also, the population size of E. coli O157:H7 was 27 times greater on young leaves affected by soft rot due to infection by Erwinia chrysanthemi than on healthy middle-aged leaves. Confocal microscopy revealed that leaf tip burn lesions, which are caused by a common physiological disorder of lettuce, harbored dense populations of E. coli O157:H7 cells both internally and externally. Investigation of the colonization of cut lettuce stems by E. coli O157:H7 showed that the pathogen grew 11-fold over 4 h of incubation after its inoculation onto the stems, from which large amounts of latex were released. The results of this study indicate that plant tissue damage of various types can promote significant multiplication of E. coli O157:H7 over a short time and suggest that harvesting and processing are critical control points in the prevention or reduction of E. coli O157:H7 contamination of lettuce.     

Recovery of E. coli O157 strains after exposure to acidification at pH 2

Aims: Rapid detection and selective isolation of E. coli O157:H7 strains have been difficult owing to the potential interference from background microflora present in high background food matrices. To help selectively isolate E. coli O157H7 strains, a useful plating technique that involved acidifying the cultures to pH 2 was evaluated with a large number of E. coli O157:H7 strains to ensure response to treatment was consistent across strains. Methods and Results: Escherichia coli O157, 46 strains including ATCC 35150, were acidified to pH 2 following enrichment and plated onto Tryptic Soy Agar + 0·6% Yeast Extract (TSA‐YE) and Sorbitol MacConkey Agar + cefixime and tellurite (CT‐SMAC). Samples were enumerated and modest decreases in plate counts were observed on TSA‐YE media, with a greater reduction observed on CT‐SMAC. Conclusions: The acid‐resistant character of E. coli O157:H7 is a consistent trait and may be used for improved isolation of the organism from mixed cultures. Significance and Impact of the Study: There was little difference observed between the commonly used laboratory strain E. coli O157:H7 35150 and 45 other strains of E. coli O157 when subjected to acidifying conditions prior to plating, demonstrating that an acid rinse procedure was equally effective across a wide variety of E. coli O157 strains and broadly applicable for isolating unknown strains from food samples.     

Characterisation of Curli Production, Cell Surface Hydrophobicity, Autoaggregation and Attachment Behaviour of Escherichia coli O157

Escherichia coli O157 are an important group of foodborne pathogens with the ability to attach to materials commonly used in food processing environments such as slightly hydrophilic stainless steel. The aim of this study was to characterise six E. coli isolates, including five E. coli O157, for curli production, autoaggregation, hydrophobicity and attachment to highly hydrophilic glass and hydrophobic Teflon^®. Curli production and autoaggregation were determined using absorbance assays; hydrophobicity by bacterial adherence to hydrocarbons, hydrophobic interaction chromatography and contact angle measurements; and attachment using epifluorescence microscopy. Curli production varied between strains and for some strains correlated with autoaggregation. Curli production correlated with decreased hydrophobicity for two strains. Four of the six isolates increased attachment to glass, but decreased attachment to Teflon^® with increased curli production. In contrast, one of the six isolates decreased attachment to glass, but increased attachment to Teflon^® with increasing curli production. Curli production by the remaining isolate did not correlate with hydrophobicity or attachment. Attachment of some E. coli, including E. coli O157, to abiotic surfaces may be influenced by curli production, autoaggregation and hydrophobicity. However, for other strains, a variety of factors may be of greater influence on these properties and ability to attach to abiotic surfaces. This study highlights the complexity of bacterial surface properties and their relationship with bacterial attachment.     

Assessments of Total and Viable Escherichia coli O157:H7 on Field and Laboratory Grown Lettuce

Leafy green produce has been associated with numerous outbreaks of foodborne illness caused by strains of Escherichia coli O157:H7. While the amounts of culturable E. coli O157:H7 rapidly decline after introduction onto lettuce in the field, it remains to be determined whether the reduction in cell numbers is due to losses in cell viability, cell injury and a subsequent inability to be detected by standard laboratory culturing methods, or a lack of adherence and hence rapid removal of the organism from the plants during application. To assess which of these options is most relevant for E. coli O157:H7 on leafy green produce, we developed and applied a propidium monoazide (PMA) real-time PCR assay to quantify viable (with PMA) and total (without PMA) E. coli O157:H7 cells on growth chamber and field-grown lettuce. E. coli O157:H7, suspended in 0.1% peptone, was inoculated onto 4-week-old lettuce plants at a level of approximately 10⁶ CFU/plant. In the growth chamber at low relative humidity (30%), culturable amounts of the nontoxigenic E. coli O157:H7 strain ATCC 700728 and the virulent strain EC4045 declined 100 to 1000-fold in 24 h. Fewer E. coli O157:H7 cells survived when applied onto plants in droplets with a pipette compared with a fine spray inoculation. Total cells for both strains were equivalent to inoculum levels for 7 days after application, and viable cell quantities determined by PMA real-time PCR were approximately 10⁴ greater than found by colony enumeration. Within 2 h after application onto plants in the field, the number of culturable E. coli ATCC 700728 was reduced by up to 1000-fold, whereas PCR-based assessments showed that total cell amounts were equivalent to inoculum levels. These findings show that shortly after inoculation onto plants, the majority of E. coli O157:H7 cells either die or are no longer culturable.     

Biofilm Formation by Escherichia coli O157:H7 on Stainless Steel: Effect of Exopolysaccharide and Curli Production on Its Resistance to Chlorine

The resistance of Escherichia coli O157:H7 strains ATCC 43895-, 43895-EPS (an exopolysaccharide [EPS]-overproducing mutant), and ATCC 43895+ (a curli-producing mutant) to chlorine, a sanitizer commonly used in the food industry, was studied. Planktonic cells of strains 43895-EPS and/or ATCC 43895+ grown under conditions supporting EPS and curli production, respectively, showed the highest resistance to chlorine, indicating that EPS and curli afford protection. Planktonic cells (ca. 9 log₁₀ CFU/ml) of all strains, however, were killed within 10 min by treatment with 50 μg of chlorine/ml. Significantly lower numbers of strain 43895-EPS, compared to those of strain ATCC 43895-, attached to stainless steel coupons, but the growth rate of strain 43895-EPS on coupons was not significantly different from that of strain ATCC 43895-, indicating that EPS production did not affect cell growth during biofilm formation. Curli production did not affect the initial attachment of cells to coupons but did enhance biofilm production. The resistance of E. coli O157:H7 to chlorine increased significantly as cells formed biofilm on coupons; strain ATCC 43895+ was the most resistant. Population sizes of strains ATCC 43895+ and ATCC 43895- in biofilm formed at 12°C were not significantly different, but cells of strain ATCC 43895+ showed significantly higher resistance than did cells of strain ATCC 43895-. These observations support the hypothesis that the production of EPS and curli increase the resistance of E. coli O157:H7 to chlorine.     

Influence of Vacuum Cooling on Escherichia coli O157:H7 Infiltration in Fresh Leafy Greens via a Multiphoton-Imaging Approach

Microbial pathogen infiltration in fresh leafy greens is a significant food safety risk factor. In various postharvest operations, vacuum cooling is a critical process for maintaining the quality of fresh produce. The overall goal of this study was to evaluate the risk of vacuum cooling-induced infiltration of Escherichia coli O157:H7 into lettuce using multiphoton microscopy. Multiphoton imaging was chosen as the method to locate E. coli O157:H7 within an intact lettuce leaf due to its high spatial resolution, low background fluorescence, and near-infrared (NIR) excitation source compared to those of conventional confocal microscopy. The variables vacuum cooling, surface moisture, and leaf side were evaluated in a three-way factorial study with E. coli O157:H7 on lettuce. A total of 188 image stacks were collected. The images were analyzed for E. coli O157:H7 association with stomata and E. coli O157:H7 infiltration. The quantitative imaging data were statistically analyzed using analysis of variance (ANOVA). The results indicate that the low-moisture condition led to an increased risk of microbial association with stomata (P < 0.05). Additionally, the interaction between vacuum cooling levels and moisture levels led to an increased risk of infiltration (P < 0.05). This study also demonstrates the potential of multiphoton imaging for improving sensitivity and resolution of imaging-based measurements of microbial interactions with intact leaf structures, including infiltration.     

Variable agronomic practices, cultivar, strain source and initial contamination dose differentially affect survival of Escherichia coli on spinach

Aims: Greenhouse and field trials were conducted under different agronomic practices and inoculum doses of environmental Escherichia coli and attenuated E. coli O157:H7, to comparatively determine whether these factors influence their survival on leaves and within the rhizosphere. Methods and Results: Hydroponic conditions: E. coli spray‐inoculated at log 4 CFU ml^?1 was recovered from leaf surfaces at a mean population of 1·6 log CFU g^?1 at 15 days. E. coli O157:H7 sprayed at log 2 or 4 CFU ml^?1 levelled off on spinach leaf surfaces at a mean average population of 1·4 log CFU g^?1 after 14 days, regardless of initial dose. Quantitative recovery was inconsistent across leaf developmental age. Field conditions: Average populations of E. coli O157:H7 spray‐inoculated at log 1·45 or 3·4 CFU m^?2 levelled off at log 1·2 CFU g^?1 over a 14‐day period. Pathogen recovery from leaves was inconsistent when compared to regularly positive detection on basal shoot tissue. Pathogen recovery from soil was inconsistent among sampling locations. Moisture content varied up to 40% DW and was associated with 50% (P < 0·05) decrease in positive locations for E. coli O157:H7 but not for E. coli. Conclusions: Overall, similar populations of environmental E. coli and E. coli O157:H7 were recovered from plants despite differences in inoculum dose and agronomic conditions. Strain source had a significant impact on the quantitative level and duration of survival on leaves and in soil. Water availability appeared to be the determinant factor in survival of E. coli and E. coli O157:H7; however, E. coli showed greater environmental fitness. Significance and Impact of the Study: Persistence of surrogate, indicator E. coli and E. coli O157:H7, irrespective of variable growing conditions in spinach is predominantly limited by water availability, strain source and localization within the plant. These findings are anticipated to ultimately be adopted into routine and investigative pathogen testing protocols and mechanical harvest practices of spinach.     

Differences in Attachment of Salmonella enterica Serovars and Escherichia coli O157:H7 to Alfalfa Sprouts

Numerous Salmonella enterica and Escherichia coli O157:H7 outbreaks have been associated with contaminated sprouts. We examined how S. enterica serovars, E. coli serotypes, and nonpathogenic bacteria isolated from alfalfa sprouts grow on and adhere to alfalfa sprouts. Growth on and adherence to sprouts were not significantly different among different serovars of S. enterica, but all S. enterica serovars grew on and adhered to alfalfa sprouts significantly better than E. coli O157:H7. E. coli O157:H7 was essentially rinsed from alfalfa sprouts with repeated washing steps, while 1 to 2 log CFU of S. enterica remained attached per sprout. S. enterica Newport adhered to 3-day-old sprouts as well as Pantoea agglomerans and 10-fold more than Pseudomonas putida and Rahnella aquatilis, whereas the growth rates of all four strains throughout seed sprouting were similar. S. enterica Newport and plant-associated bacteria adhered 10- to 1,000-fold more than E. coli O157:H7; however, three of four other E. coli serotypes, isolated from cabbage roots exposed to sewage water following a spill, adhered to sprouts better than E. coli O157:H7 and as well as the Pseudomonas and Rahnella strains. Therefore, attachment to alfalfa sprouts among E. coli serotypes is variable, and nonpathogenic strains of E. coli to be used as surrogates for the study of pathogenic E. coli may be difficult to identify and should be selected carefully, with knowledge of the biology being examined.     

Potential Uptake of Escherichia coli O157:H7 from Organic Manure into Crisphead Lettuce

To investigate the potential transfer of Escherichia coli O157:H7 from contaminated manure to fresh produce, lettuce seedlings were transplanted into soil fertilized with bovine manure which had been inoculated with approximately 10⁴ CFU g⁻¹ E. coli O157:H7. The lettuce was grown for approximately 50 days in beds in climate-controlled rooms in a greenhouse. As the bacterium was not detected in the edible parts of the lettuce, the outer leaves of the lettuce, or the lettuce roots at harvest it was concluded that transmission of E. coli O157:H7 from contaminated soil to lettuce did not occur. The pathogen persisted in the soil for at least 8 weeks after fertilizing but was not detected after 12 weeks. Indigenous E. coli was detected only sporadically on the lettuce at harvest, and enterococci were not detected at all. The numbers of enterococci declined more rapidly than those of E. coli in the soil. Pseudomonas fluorescens, which inhibited growth of E. coli O157:H7 in vitro, was isolated from the rhizosphere.     

Attachment and biofilm formation on stainless steel by Escherichia coli O157:H7 as affected by curli production

AIMS: The aim of this study was to determine the role of curli in attachment and biofilm formation by Escherichia coli O157:H7 on stainless steel. METHODS AND RESULTS: Three curli-deficient strains (43895-, 43894- and E0018-) and three curli over-producing strains (43895+, 43894+ and E0018+) of E. coli O157:H7 were studied. Stainless steel coupons (SSC) were immersed in cell suspensions of each strain for 24 h at 4 degrees C. The number of cells attached to SSC was determined. To determine the ability of attached cells to form biofilm, SSC were immersed in 10% of tryptic soya broth up to 6 days at 22 degrees C. Curli-deficient and curli-producing strains did not differ in their ability to attach to SSC, but only curli-producing strains formed biofilms. CONCLUSIONS: Curli production by E. coli O157:H7 does not affect attachment of cells on stainless steel but curli-producing strains are better able to form biofilms. SIGNIFICANCE AND IMPACT OF THE STUDY: Curli production by E. coli O157:H7 enhances its ability to form biofilm on stainless steel, thereby potentially resulting in increased difficulty in removing or killing cells by routine cleaning and sanitizing procedures used in food-processing plants.     

CsgA production by Escherichia coli O157:H7 alters attachment to abiotic surfaces in some growth environments

The role of curli expression in attachment of Escherichia coli O157:H7 to glass, Teflon, and stainless steel (SS) was investigated through the creation of csgA knockout mutants in two isolates of E. coli O157:H7. Attachment assays using epifluorescence microscopy and measurements of the force of adhesion of bacterial cells to the substrates using atomic force microscopy (AFM) force mapping were used to determine differences in attachment between wild-type (wt) and csgA-negative (ΔcsgA) strains following growth in four different media. The hydrophobicity of the cells was determined using contact angle measurements (CAM) and bacterial adhesion to hydrocarbons (BATH). The attachment assay results indicated that ΔcsgA strains attached to glass, Teflon, and SS surfaces in significantly different numbers than their wt counterparts in a growth medium-dependent fashion (P < 0.05). However, no clear correlation was seen between attachment numbers, surface type, or growth medium. No correlation was seen between BATH and CAM results (R(2) < 0.70). Hydrophobicity differed between the wt and ΔcsgA in some cases in a growth medium- and method-dependent fashion (P < 0.05). AFM force mapping revealed no significant difference in the forces of adhesion to glass and SS surfaces between wt and ΔcsgA strains (P > 0.05) but a significantly greater force of adhesion to Teflon for one of the two wt strains than for its ΔcsgA counterpart (P < 0.05). This study shows that CsgA production by E. coli O157:H7 may alter attachment behavior in some environments; however, further investigation is required in order to determine the exact relationship between CsgA production and attachment to abiotic surfaces.     

Diarrheal and Environmental Isolates of Aeromonas spp. Produce a Toxin Similar to Shiga-Like Toxin 1

Diarrheal and environmental isolates of 39 strains of Aeromonas spp. were studied for detection of virulence factors. Although these 39 strains did not produce either heat-labile or heat-stable enterotoxins, culture filtrates of 31 strains produced cytopathic effects on Vero cells. Among these, culture filtrates of three strains of Aeromonas hydrophila and one strain of Aeromonas caviae could be neutralized by Escherichia coli O157:H7 Shiga-like toxin 1 antiserum. A single band of plasmid DNA of 2.14 kbp was isolated from these strains of Aeromonas spp. and E. coli O157:H7, which could be amplified by the polymerase chain reaction (PCR), employing oligonucleotide primers from the Shiga-like toxin 1 (SLT1) gene of E. coli O157:H7. E. coli HB 101 cells when transformed with the same plasmid showed cytopathic effects on Vero cells, which indicates that the SLT 1 homolog gene(s) of Aeromonas spp. is plasmid encoded. These results suggest that Aeromonas spp. may also produce Shiga-like toxin 1, or at least a cytotoxin with some homology with the Shiga-like toxin 1 of E. coli O157:H7.     

Role of curli fimbriae in mediating the cells of enterohaemorrhagic Escherichia coli to attach to abiotic surfaces

AIMS: The objectives of this study were to evaluate the role of curli in assisting the cells of enterohaemorrhagic Escherichia coli (EHEC) in attaching to abiotic surfaces and to determine the influence of cell-surface contact time on the efficiency of the attachment. METHODS AND RESULTS: Three pairs of EHEC cultures, each with a curli-expressing and a noncurli-expressing variant (O111:H- 7-57C+ and O157:H7 5-9C-, O157:H7 5-11C+ and 5-11C-, as well as O103:H2 7-52C+ and 7-52C-), were allowed to interact with polystyrene, glass, stainless steel and rubber surfaces at 28 degrees C for 24 h (short-term attachment) or 7 days (long-term attachment). The quantities of the cells that attached to the surfaces were measured daily in the long-term attachment study, and in 4 h intervals in the short-term attachment study. Quantification of the cells that attached to the surfaces was accomplished with a crystal violet binding assay. The results of the long-term attachment study indicated that 7-57C+ attached to the polystyrene and glass surfaces more efficiently (P < 0.05) than did 5-9C-. The curli-expressing variant of 5-11 possessed a better ability to adhere to the polystyrene and glass surfaces than did its noncurli-expressing counterpart (P < 0.05). The differences in attachment between 7-52C+ and 7-52C- on polystyrene and stainless steel surfaces were statistically significant (P < 0.05). However, the attachment of the pair on the glass surfaces was statistically insignificant (P > 0.05). In addition, the two members of all three EHEC pairs attached equally well to rubber surfaces (P > 0.05). In the short-term attachment study, only the pair of 7-52 attached differently on glass and stainless steel surfaces (P < 0.05). CONCLUSIONS: These results suggest that curli could be an important cell surface component to mediate the attachment of some EHEC cells to certain abiotic surfaces. Cell-surface contact time could have a significant influence on EHEC attachment to abiotic surfaces. SIGNIFICANCE AND IMPACT OF THE STUDY: The study signifies a possible role of curli in assisting the cells of EHEC in attaching to food-contact surfaces. It underlines the importance of cleaning and sanitizing food-contact surfaces regularly and thoroughly, and of identifying chemical agents that can effectively remove the attached EHEC cells from these surfaces.     

Differences in internalization and growth of Escherichia coli O157:H7 within the apoplast of edible plants,spinach and lettuce,compared with the model species Nicotiana benthamiana

Internalization of food‐borne bacteria into edible parts of fresh produce plants represents a serious health risk. Therefore, internalization of verocytotoxigenic E. coli O157:H7 isolate Sakai was assessed in two species associated with outbreaks, spinach (Spinacia oleracea) and lettuce (Lactuca sativa) and compared to the model species Nicotiana benthamiana. Internalization occurred in the leaves and roots of spinach and lettuce throughout a 10 day time‐course. The plant species, tissue type and inoculum dose all impacted the outcome. A combination of low inoculum dose (~10² CFU) together with light microscopy imaging highlighted marked differences in the fate of endophytic E. coli O157:H7 Sakai. In the fresh produce species, bacterial growth was restricted but viable cells persisted over 20 days, whereas there was > 400‐fold (~2.5 Log₁₀) increase in growth in N. benthamiana. Colony formation occurred adjacent to epidermal cells and mesophyll cells or close to vascular bundles of N. benthamiana and contained components of a biofilm matrix, including curli expression and elicitation, extracellular DNA and a limited presence of cellulose. Together the data show that internalization is a relevant issue in crop production and that crop species and tissue need to be considered as food safety risk parameters.     

Effects of Cattle Feeding Regimen and Soil Management Type on the Fate of Escherichia coli O157:H7 and Salmonella enterica Serovar Typhimurium in Manure, Manure-Amended Soil, and Lettuce

Survival of the green fluorescent protein-transformed human pathogens Escherichia coli O157:H7 and Salmonella enterica serovar Typhimurium was studied in a laboratory-simulated lettuce production chain. Dairy cows were fed three different roughage types: high-digestible grass silage plus maize silage (6:4), low-digestible grass silage, and straw. Each was adjusted with supplemental concentrates to high and low crude protein levels. The pathogens were added to manure, which was subsequently mixed (after 56 and 28 days for E. coli O157:H7 and Salmonella serovar Typhimurium, respectively) with two pairs of organically and conventionally managed loamy and sandy soil. After another 14 days, iceberg lettuce seedlings were planted and then checked for pathogens after 21 days of growth. Survival data were fitted to a logistic decline function (exponential for E. coli O157:H7 in soil). Roughage type significantly influenced the rate of decline of E. coli O157:H7 in manure, with the fastest decline in manure from the pure straw diet and the slowest in manure from the diet of grass silage plus maize silage. Roughage type showed no effect on the rate of decline of Salmonella serovar Typhimurium, although decline was significantly faster in the manure derived from straw than in the manure from the diet of grass silage plus maize silage. The pH and fiber content of the manure were significant explanatory factors and were positively correlated with the rate of decline. With E. coli O157:H7 there was a trend of faster decline in organic than in conventional soils. No pathogens were detected in the edible lettuce parts. The results indicate that cattle diet and soil management are important factors with respect to the survival of human pathogens in the environment.