NMR structure of duplex DNA containing the α‐OH‐PdG·dA base pair: A mutagenic intermediate of acrolein

Acrolein, a cell metabolic product and main component of cigarette smoke, reacts with DNA generating α‐OH‐PdG lesions, which have the ability to pair with dATP during replication thereby causing G to T transversions. We describe the solution structure of an 11‐mer DNA duplex containing the mutagenic α‐OH‐PdG·dA base pair intermediate, as determined by solution nuclear magnetic resonance (NMR) spectroscopy and retrained molecular dynamics (MD) simulations. The NMR data support a mostly regular right‐handed helix that is only perturbed at its center by the presence of the lesion. Undamaged residues of the duplex are in anti orientation, forming standard Watson‐Crick base pairs alignments. Duplication of proton signals at and near the damaged base pair reveals the presence of two enantiomeric duplexes, thus establishing the exocyclic nature of the lesion. The α‐OH‐PdG adduct assumes a syn conformation pairing to its partner dA base that is protonated at pH 6.6. The three‐dimensional structure obtained by restrained molecular dynamics simulations show hydrogen bond interactions that stabilize α‐OH‐PdG in a syn conformation and across the lesion containing base pair. We discuss the implications of the structures for the mutagenic bypass of acrolein lesions. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 391–401, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Characterization of a pectic polysaccharide from the leaves of Diospyros kaki and its modulating activity on lymphocyte proliferation

Pectin is a group of carbohydrate polymers constructing the primary cell walls and the middle lamella of terrestrial plants. Herein, we demonstrated the structure and immunomodulatory activity of the major pectic polysaccharide DL‐3B₂ isolated from the leaves of Diospyros kaki. Based on composition analysis, methylation analysis, two‐step acid hydrolysis, lithium‐mediated selective degradation, ¹³C NMR spectroscopy, and electrospray ionization mass spectrometry, DL‐3B₂ was found to contain an α‐1, 4‐linked galacturonic acid (GalA) backbone with some insertions of α‐1, 2‐linked rhamnose residues. The arabinan‐ and arabinogalactan‐side chains were attached to O‐4 of the rhamnose residues, whereas the linear arabinoxylan was probably linked to O‐3 of the GalA residues. Immunological tests in vitro showed that DL‐3B₂ could help stimulate lipopolysaccharide‐induced B lymphocyte proliferation, but not ConA‐induced T lymphocyte proliferation, and that the arabinose residues play a role in maintaining this immunological activity. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 649–656, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

A strained DNA binding helix is conserved for site recognition,folding nucleation,and conformational modulation

Nucleic acid recognition is often mediated by α‐helices or disordered regions that fold into α‐helix on binding. A peptide bearing the DNA recognition helix of HPV16 E2 displays type II polyproline (PII) structure as judged by pH, temperature, and solvent effects on the CD spectra. NMR experiments indicate that the canonical α‐helix is stabilized at the N‐terminus, while the PII forms at the C‐terminus half of the peptide. Re‐examination of the dihedral angles of the DNA binding helix in the crystal structure and analysis of the NMR chemical shift indexes confirm that the N‐terminus half is a canonical α‐helix, while the C‐terminal half adopts a 3₁₀ helix structure. These regions precisely match two locally driven folding nucleii, which partake in the native hydrophobic core and modulate a conformational switch in the DNA binding helix. The peptide shows only weak and unspecific residual DNA binding, 10⁴‐fold lower affinity, and 500‐fold lower discrimination capacity compared with the domain. Thus, the precise side chain conformation required for modulated and tight physiological binding by HPV E2 is largely determined by the noncanonical strained α‐helix conformation, “presented” by this unique architecture. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 432–443, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of the human cannabinoid receptor one carboxyl‐terminus identifies two amphipathic helices

Recent research has implicated the C‐terminus of G‐protein coupled receptors in key events such as receptor activation and subsequent intracellular sorting, yet obtaining structural information of the entire C‐tail has proven a formidable task. Here, a peptide corresponding to the full‐length C‐tail of the human CB1 receptor (residues 400–472) was expressed in E.coli and purified in a soluble form. Circular dichroism (CD) spectroscopy revealed that the peptide adopts an α‐helical conformation in negatively charged and zwitterionic detergents (48–51% and 36–38%, respectively), whereas it exhibited the CD signature of unordered structure at low concentration in aqueous solution. Interestingly, 27% helicity was displayed at high peptide concentration suggesting that self‐association induces helix formation in the absence of a membrane mimetic. NMR spectroscopy of the doubly labeled (¹⁵N‐ and ¹³C‐) C‐terminus in dodecylphosphocholine (DPC) identified two amphipathic α‐helical domains. The first domain, S401‐F412, corresponds to the helix 8 common to G protein‐coupled receptors while the second domain, A440‐M461, is a newly identified structural motif in the distal region of the carboxyl‐terminus of the receptor. Molecular modeling of the C‐tail in DPC indicates that both helices lie parallel to the plane of the membrane with their hydrophobic and hydrophilic faces poised for critical interactions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 565–573, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Study on the inhibitory mechanism and binding mode of the hydroxycoumarin compound NSC158393 to HIV‐1 integrase by molecular modeling

Human immunodeficiency virus type 1 integrase (IN) is an essential enzyme in the life cycle of this virus and also an important target for the study of anti‐HIV drugs. In this work, the binding modes of the wild type IN core domain and the two mutants, that is, W132G and C130S, with the 4‐hydroxycoumarin compound NSC158393 were evaluated by using the “relaxed complex” molecular docking approach combined with molecular dynamics (MD) simulations. Based on the monomer MD simulations, both of the two substitutions affect not only the stability of the 128–136 peptides, but also the flexibility of the functional 140s loop. In principle, NSC158393 binds the 128–136 peptides of IN; however, the specific binding modes for the three systems are various. According to the binding mode of NSC158393 with WT, NSC158393 can effectively interfere with the stability of the IN dimer by causing a steric hindrance around the monomer interface. Additionally, through the comparative analysis of the MD trajectories of the wild type IN and the IN‐NSC158393 complex, we found that NSC15893 may also exert its inhibitory function by diminishing the mobility of the function loop of IN. Three key binding residues, that is, W131, K136, and G134, were discovered by energy decomposition calculated with the Molecular Mechanics Generalized Born Surface Area method. Characterized by the largest binding affinity, W131 is likely to be indispensable for the ligand binding. All the above results are consistent with experiment data, providing us some helpful information for understanding the mechanism of the coumarin‐based inhibitors. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 700–709, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Effects of force fields on the conformational and dynamic properties of amyloid β(1‐40) dimer explored by replica exchange molecular dynamics simulations

The conformational space and structural ensembles of amyloid beta (Aβ) peptides and their oligomers in solution are inherently disordered and proven to be challenging to study. Optimum force field selection for molecular dynamics (MD) simulations and the biophysical relevance of results are still unknown. We compared the conformational space of the Aβ(1‐40) dimers by 300 ns replica exchange MD simulations at physiological temperature (310 K) using: the AMBER‐ff99sb‐ILDN, AMBER‐ff99sb*‐ILDN, AMBER‐ff99sb‐NMR, and CHARMM22* force fields. Statistical comparisons of simulation results to experimental data and previously published simulations utilizing the CHARMM22* and CHARMM36 force fields were performed. All force fields yield sampled ensembles of conformations with collision cross sectional areas for the dimer that are statistically significantly larger than experimental results. All force fields, with the exception of AMBER‐ff99sb‐ILDN (8.8 ± 6.4%) and CHARMM36 (2.7 ± 4.2%), tend to overestimate the α‐helical content compared to experimental CD (5.3 ± 5.2%). Using the AMBER‐ff99sb‐NMR force field resulted in the greatest degree of variance (41.3 ± 12.9%). Except for the AMBER‐ff99sb‐NMR force field, the others tended to under estimate the expected amount of β‐sheet and over estimate the amount of turn/bend/random coil conformations. All force fields, with the exception AMBER‐ff99sb‐NMR, reproduce a theoretically expected β‐sheet‐turn‐β‐sheet conformational motif, however, only the CHARMM22* and CHARMM36 force fields yield results compatible with collapse of the central and C‐terminal hydrophobic cores from residues 17‐21 and 30‐36. Although analyses of essential subspace sampling showed only minor variations between force fields, secondary structures of lowest energy conformers are different.     

Conformationally restricted PACAP27 analogues incorporating type II/II′ IBTM β-Turn Mimetics. Synthesis, NMR Structure Determination, and Binding Affinity

To probe the importance of a proposed β-turn within residues S9-R12 of PACAP for recognition by VIP/PACAP receptors, compounds 1 and 2, two conformationally restricted analogues of PACAP27 incorporating respectively (S)- or (R)-IBTM as type II or II′ β-turn dipeptide mimetic at the Y10-S11 position, were synthesized. According to ¹H NMR conformational analyses in aqueous solution and 30% TFE, both PACAP27 and the [S-IBTM^10,11]PACAP27 analogue 1 adopt similar ordered structures. PACAP27 shows an N-terminal disordered region (residues H1-F6) and an -helical conformation within segment T7–L27. For residues S9–R12, our data seem more compatible with a segment of the -helix than with the β-turn previously proposed for this fragment. In compound 1 the -helix, also spanning T7–L27 residues, appears slightly distorted at the N-terminus relative to the native peptide. Although this distortion could lead to the marked decrease in binding affinity of this compound at the VIP/PACAP receptors, the lack of the Y10 side chain in analogues 1 and 2 could also significantly affect the binding of these compounds.     

Human tropoelastin sequence: Dynamics of polypeptide coded by exon 6 in solution

Calorimetric studies were performed on exon 6 in powdered form and in solution [water and 2,2,2‐trifluoroethanol (TFE), a structure‐inducing solvent or cosolvent]. Dynamic dielectric spectroscopy (DDS) analyses were realized in water and 20% TFE. The major role of solvent–peptide organization is evidenced with these techniques. Calorimetric measurements reveal the structural water organization around the polypeptide as well as the presence of hydrophobic interactions in TFE solution. Dielectric measurements showed for exon 6/water a decrease of relaxations times of bulk solvent implying a faster dynamics with a slight increase of the activation entropy, suggesting that exon 6 probably creates disorder within the solvent. For TFE/water mixtures, an influence of exon 6 on its environment was seen with a relaxation associated with the exon 6/solvent interactions reinforced by storage of 72 h. Finally, exon 6/solvent interactions were clearly observed with additionof TFE. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 943–952, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Importance of the spatial display of charged residues in heparin–peptide interactions

Many studies have examined consensus sequences required for protein‐glycosaminoglycan interactions. Through the synthesis of helical heparin binding peptides, this study probes the relationship between spatial arrangement of positive charge and heparin binding affinity. Peptides with a linear distribution of positive charge along one face of the α‐helix had the highest affinity for heparin. Moving the basic residues away from a single face resulted in drastic changes in heparin binding affinity of up to three orders of magnitude. These findings demonstrate that amino acid sequences, different from the known heparin binding consensus sequences, will form high affinity protein‐heparin binding interactions when the charged residues are aligned linearly. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 290–298, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Insight into the stability of cross‐β amyloid fibril from molecular dynamics simulation

Amyloid fibrils are considered to play causal roles in the pathogenesis of amyloid‐related degenerative diseases such as Alzheimer's disease, type II diabetes mellitus, the transmissible spongiform encephalopathies, and prion disease. The mechanism of fibril formation is still hotly debated and remains an important open question. In this study, we utilized molecular dynamics (MD) simulation to analyze the stability of hexamer for eight class peptides. The MD results suggest that VEALYL and MVGGVV‐1 are the most stable ones, then SNQNNY, followed by LYQLEN, MVGGVV‐2, VQIVYK, SSTSAA, and GGVVIA. The statistics result indicates that hydrophobic residues play a key role in stabilizing the zipper interface. Single point and two linkage mutants of MVGGVV‐1 confirmed that both Met1 and Val2 are key hydrophobic residues. This is consistent with the statistics analysis. The stability results of oligomer for MVGGVV‐1 suggest that the intermediate state should be trimer (3‐0) and tetramer (2‐2). These methods can be used in stabilization study of other amyloid fibril. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 578–586, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Mechanism of formation of the C‐terminal β‐hairpin of the B3 domain of the immunoglobulin‐binding protein G from Streptococcus. IV. Implication for the mechanism of folding of the parent protein

A 34‐residue α/β peptide [IG(28–61)], derived from the C‐terminal part of the B3 domain of the immunoglobulin binding protein G from Streptoccocus, was studied using CD and NMR spectroscopy at various temperatures and by differential scanning calorimetry. It was found that the C‐terminal part (a 16‐residue‐long fragment) of this peptide, which corresponds to the sequence of the β‐hairpin in the native structure, forms structure similar to the β‐hairpin only at T = 313 K, and the structure is stabilized by non‐native long‐range hydrophobic interactions (Val47–Val59). On the other hand, the N‐terminal part of IG(28–61), which corresponds to the middle α‐helix in the native structure, is unstructured at low temperature (283 K) and forms an α‐helix‐like structure at 305 K, and only one helical turn is observed at 313 K. At all temperatures at which NMR experiments were performed (283, 305, and 313 K), we do not observe any long‐range connectivities which would have supported packing between the C‐terminal (β‐hairpin) and the N‐terminal (α‐helix) parts of the sequence. Such interactions are absent, in contrast to the folding pathway of the B domain of protein G, proposed recently by Kmiecik and Kolinski (Biophys J 2008, 94, 726–736), based on Monte‐Carlo dynamics studies. Alternative folding mechanisms are proposed and discussed. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 469–480, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Effect of the ΔPhe residue configuration on a didehydropeptides conformation: A combined CD and NMR study

Conformations of two pairs of dehydropeptides with the opposite configuration of the ΔPhe residue, Boc‐Gly‐Δ^ZPhe‐Gly‐Phe‐OMe ( Z‐ OMe ), Boc‐Gly‐Δ^EPhe‐Gly‐Phe‐OMe ( E‐ OMe ), Boc‐Gly‐Δ^ZPhe‐Gly‐Phe‐p‐NA ( Z‐p‐ NA ), and Boc‐Gly‐Δ^EPhe‐Gly‐Phe‐p‐NA ( E‐p‐ NA ) were compared on the basis of CD and NMR studies in MeOH, trifluoroethanol (TFE), MeCN, chloroform, and dimethylsulfoxide (DMSO). The CD results were used as the additional input data for the NMR‐based determination of the detailed solution conformations of the peptides. It was found that E‐ OMe is unordered and Z‐ OMe , Z‐p‐ NA , and E‐p‐ NA adopt the β‐turn conformation. There are two overlapping β‐turns in each of those peptides: type II and type III′ in Z‐ OMe and Z‐p‐ NA , and two type III in E‐p‐ NA . The ordered structure‐inducing properties of Δ^ZPhe and Δ^EPhe in the peptides studied depend on the C‐terminal blocking group. In methyl esters, the Δ^ZPhe residue is a strong inducer of ordered conformations whereas the Δ^EPhe one has no such properties. In p‐nitroanilides, both isomers of ΔPhe cause the peptides to adopt ordered structures to a similar extent. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1055–1064, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Terminal sidechain packing of a designed β‐hairpin influences conformation and stability

While end capping in α‐helices is well understood, the concept of capping a β‐hairpin is a relatively recent development; to date, favorable Coulombic interactions are the only example of sidechains at the termini influencing the overall stability of a β‐hairpin. While cross‐strand hydrophobic residues generally provide hairpin stabilization, particular when flanking the turn region, those remote from this location appear to provide little stabilization. While probing for an optimal residue at a hydrogen bond position near the terminus of a designed β‐hairpin a conservative, hydrophobic, V → I mutation was observed to not only result in a significant change in fold population but also effected major changes in the structuring shifts at numerous sites in the peptide. Mutational studies reveal that there is an interaction between the sidechain at this H‐bonded site and the sidechain at the C‐terminal non‐H‐bonded site of the hairpin. This interaction, which appears to be hydrophobic in character, requires a highly twisted hairpin structure. Modifications at the C‐terminal site, for example an E → A mutation (ΔΔG_U = 6 kJ/mol), have profound affects on fold structure and stability. The data suggests that this may be a case of hairpin end capping by the formation of a hydrophobic cluster. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 557–564, 2009. This article was originally published online as an accepted preprint. The “Published Online”date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Single‐molecule pair studies of the interactions of the α‐GalNAc (Tn‐antigen) form of porcine submaxillary mucin with soybean agglutinin

Mucins form a group of heavily O‐glycosylated biologically important glycoproteins that are involved in a variety of biological functions, including modulating immune response, inflammation, and adhesion. Mucins are also involved in cancer and metastasis and often express diagnostic cancer antigens. Recently, a modified porcine submaxillary mucin (Tn‐PSM) containing GalNAcα1‐O‐Ser/Thr residues was shown to bind to soybean agglutinin (SBA) with ～10⁶‐fold enhanced affinity relative to GalNAcα1‐O‐Ser, the pancarcinoma carbohydrate antigen. In this study, dynamic force spectroscopy is used to investigate molecular pairs of SBA and Tn‐PSM. A number of force jumps that demonstrate unbinding or rebinding events were observed up to a distance equal to 2.0 μm, consistent with the length of the mucin chain. The unbinding force increased from 103 to 402 pN with increasing force loading rate. The position of the activation barrier in the energy landscape of the interaction was 0.1 nm. The lifetime of the SBA–TnPSM complex in the absence of applied force was determined to be in the range 1.3–1.9 s. Kinetic parameters describing the rate of dissociation of other sugar lectin interactions are in the range 3.3 × 10^?3–2.5 × 10^?3 s. The long lifetime of the SBA‐TnPSM complex is compatible with a binding model in which lectin molecules “bind and jump” from α‐GalNAc residue to α‐GalNAc residue along the polypeptide chain of Tn‐PSM before dissociating. These findings have important implications for the molecular recognition properties of mucins. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 719–728, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Viral structural transition mechanisms revealed by multiscale molecular dynamics/order parameter extrapolation simulation

On the basis of an all‐atom multiscale analysis theory of nanosystem dynamics, a multiscale molecular dynamics/order parameter extrapolation (MD/OPX) approach has recently been developed. It accelerates MD for long‐time simulation of large bionanosystems and addresses rapid atomistic fluctuations and slowly varying coherent dynamics simultaneously. In this study, MD/OPX is optimized and implemented to simulate viral capsid structural transitions. Specifically, 200 ns MD/OPX simulation of the swollen state of cowpea chlorotic mottle virus capsid reveals that it undergoes significant energy‐driven shrinkage in vacuum, which is a symmetry‐breaking process involving local initiation and front propagation. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 61–73, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Glycerol‐induced folding of unstructured disulfide‐deficient lysozyme into a native‐like conformation

2SS[6‐127,64‐80] variant of lysozyme which has two disulfide bridges, Cys6‐Cys127 and Cys64‐Cys80, and lacks the other two disulfide bridges, Cys30‐Cys115 and Cys76‐Cys94, was quite unstructured in water, but a part of the polypeptide chain was gradually frozen into a native‐like conformation with increasing glycerol concentration. It was monitored from the protection factors of amide hydrogens against H/D exchange. In solution containing various concentrations of glycerol, H/D exchange reactions were carried out at pH* 3.0 and 4°C. Then, ¹H‐¹⁵N‐HSQC spectra of partially deuterated protein were measured in a quenching buffer for H/D exchange (95% DMSO/5% D₂O mixture at pH* 5.5 adjusted with dichloroacetate). In a solution of 10% glycerol, the protection factors were nearly equal to 10 at most of residues. With increasing glycerol concentration, some selected regions were further protected, and their protection factors reached about a 1000 in 30% glycerol solution. The highly protected residues were included in A‐, B‐, and C‐helices and β3‐strand, and especially centered on Ile 55 and Leu 56. In 2SS[6‐127,64‐80], long‐range interactions were recovered due to the preferential hydration by glycerol in the hydrophobic box of the α‐domain. Glycerol‐induced recovering of the native‐like structure is discussed from the viewpoint of molten globules growing with the protein folding. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 665–675, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Structural analysis of some soluble elastins by means of FT‐IR and 2D IR correlation spectroscopy

Fourier transform infrared (FT‐IR) spectroscopy combined with 2D correlation spectroscopy has been used to offer some information about stability and structure of some soluble elastins. Temperature has been chosen as the perturbation to monitor the infrared behavior of various soluble elastins, namely, α‐elastin p, α‐elastin, and k‐elastin. In the 3800–2700 cm^?1 region, the H‐containing groups were analyzed. The bonded hydroxyls are found to decrease prior to the NH‐related hydrogen bonds and also to the conformational reorganization of hydrocarbon chains. The transition temperatures were evaluated and they were found to agree with those obtained from DSC data. The FTIR spectra and their 2nd derivatives denote that α‐ elastins exhibited amide‐I, ‐II and ‐III bands at 1656, 1539 and 1236 cm^?1, respectively, while in k‐elastin these bands were found at 1652 cm^?1 for amide I, 1540 cm^?1 for amide II and 1248 cm^?1 for amide III. The macroscopic IR finger‐print method, which combines: general IR spectra, secondary derivative spectra, and 2D‐IR correlation spectra, is useful to discriminate different elastins. Thus using the differences of the position and intensity of the bands from “fingerprint region” of studied elastins, which include the peaks assigned to C?O, C? C groups from α‐helix, β‐turn, and the peaks assigned to the amide groups, it is possible to identify and discriminate elastins from each others. Furthermore, the pattern of 2D‐IR correlation spectra under thermal perturbation, allow their direct identification and discrimination. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1072–1084, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Interaction of α‐gliadin with polyanions: Design considerations for sequestrants used in supportive treatment of celiac disease

Copolymers of sodium 4‐styrene sulfonate (SS) and hydroxyethyl methacrylate (HEMA) were investigated as sequestrants of α‐gliadin, a gluten protein, for the treatment of gluten intolerance. The interactions of α‐gliadin with poly(SS) and poly(HEMA‐co‐SS) with 9 and 26 mol% SS content were studied at gastric (1.2) and intestinal (6.8) pH using circular dichroism and measurements of turbidity, dynamic light scattering and zeta potential. The interactions and their influence on α‐gliadin secondary and aggregated structures depended mainly on the ratio of polymer negative and protein positive charges at pH 1.2, and on polymer SS content at polymer concentrations providing in excess of negative charges at either pH. Poly(SS) could not form complex particles with α‐gliadin in a sufficient excess of negative charges. Copolymerization with HEMA enhanced the formation of complex particles. Poly(HEMA‐co‐SS) with intermediate SS content was found to be the most effective sequestrant for α‐gliadin. This study provides insight into design considerations for polymer sequestrants used in the supportive treatment of celiac disease. © 2009 Wiley Periodicals, Inc. Biopolymers 93:418–428, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

The effect of the side chain length of Asp and Glu on coordination structure of Cu2+ in a de novo designed protein

Metal ions in proteins are important not only for the formation of the proper structures but also for various biological activities. For biological functions such as hydrolysis and oxidation, metal ions often adopt unusual coordination structures. We constructed a stable scaffold for metal binding to create distorted metal coordination structures. A stable four stranded α‐helical coiled‐coil structure was used as the scaffold, and the metal binding site was in the cavity created at the center of the structure. Two His residues and one Asp or Glu residue were used to coordinate the metal ions, AM2D and AM2E, respectively. Cu²⁺ bound to AM2D with an equatorial planar coordination structure with two His, one Asp, and H₂O as detected by electron spin resonance and UV spectral analyzes. On the other hand, Cu²⁺ had a slightly distorted square planar structure when it bound two His and Glu in AM2E, due to the longer side‐chain of the Glu residue as compared to the Asp residue. Computational analysis also supported the distorted coordination structure of Cu²⁺ in AM2E. This construct should be useful to create various coordinations of metal ions for catalytic functions. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 907–916, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

3(10)-Helix adjoining alpha-helix and beta-strand: sequence and structural features and their conservation

Does the amino acid use at the terminal positions of an α‐helix become altered depending on the context—more specifically, when there is an adjoining 3₁₀‐helix, and can a single helical cylinder encompass the resultant composite helix? An analysis of 138 and 107 cases of 3₁₀–α and α–3₁₀ composite helices, respectively, found in known protein structures indicate that the secondary structural element occurring first imposes its characteristics on the sequence of the structural element coming next. Thus, when preceded by a 3₁₀‐helix, the preference of proline to occur at the N1 position of an α‐helix is shifted to the N2 position, a typical characteristic of the C‐terminal capping of the 3₁₀‐helix. When an α‐ or a 3₁₀‐helix leads into a helix of the other type, there is a bend at the junction, especially for the 3₁₀–α composite, with the two junction residues facing inward and buried within the structure. Thus a single helical cylinder may not properly represent a composite helix, the bend providing a means for the tertiary structure to assume a globular shape, very much akin to what a proline‐induced kink does to an α‐helix. The tertiary structural context in which β–3₁₀ and 3₁₀–β composites occurs can be different, causing the angle between the secondary structural elements in the two cases to be different. Composites of 3₁₀‐helices and β‐strands are much more conserved among members in families of homologous structures than those between two types of helices; in many of the former instances, the 3₁₀‐helix constitutes the loops in β‐hairpin or β–β‐corner motifs. The overall fold of the chain may be more conserved than the actual identify of the secondary structure elements in a composite. © 2005 Wiley Periodicals, Inc. Biopolymers 78: 147–162, 2005 This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com