Polymersome encapsulated hemoglobin: a novel type of oxygen carrier

Bovine hemoglobin (Hb) was encapsulated inside polymer vesicles (polymersomes) to form polymersome encapsulated Hb (PEH) dispersions. PEH particles are 100% surface PEGylated with longer PEG chains and possess thicker hydrophobic membranes as compared to conventional liposomes. Polymersomes were self-assembled from poly(butadiene)-poly(ethylene glycol) (PBD-PEO) amphiphilic diblock copolymers with PBD-PEO molecular weights of 22-12.6, 5-2.3, 2.5-1.3, and 1.8-0.9 kDa. The first two diblock copolymers possessed linear hydrophobic PBD blocks, while the later possessed branched PBD blocks. PEH dispersions were extruded through 100 and 200 nm pore radii membranes. The size distribution, Hb encapsulation efficiency, P(50), cooperativity coefficient, and methemoglobin (metHb) level of PEH dispersions were consistent with values required for efficient oxygen delivery in the systemic circulation. The influence of different molecular weight diblock copolymers on the physical properties of PEH dispersions was analyzed. PBD-PEO copolymers with molecular weights of 22-12.6 and 2.5-1.3 kDa completely dissolved in aqueous solution to form polymersomes, while the other two copolymers formed a mixture of solid copolymer precipitates and polymersomes. PEHs self-assembled from 22-12.6 and 2.5-1.3 kDa PBD-PEO copolymers possessed Hb loading capacities greater than PEG-LEHs, PEGylated actin-containing LEHs, and nonmodified LEHs, although their sizes were smaller and their hydrophobic membranes were thicker. The Hb loading capacities of these polymersomes were also higher than lipogel encapsulated hemoglobin particles and nanoscale hydrogel encapsulated hemoglobin particles. PEH dispersions exhibited average radii larger than 50 nm and exhibited oxygen affinities comparable to human erythrocytes. Polymersomes did not induce Hb oxidation. The interaction between Hb and the membrane of 2.5-1.3 kDa PBD-PEO polymersomes improved the monodispersity of these particular PEH dispersions. These results suggest that PEHs could serve as efficient oxygen therapeutics.     

Phosphonium-containing diblock copolymers for enhanced colloidal stability and efficient nucleic Acid delivery

RAFT polymerization successfully controlled the synthesis of phosphonium-based AB diblock copolymers for nonviral gene delivery. A stabilizing block of either oligo(ethylene glycol(9)) methyl ether methacrylate or 2-(methacryloxy)ethyl phosphorylcholine provided colloidal stability, and the phosphonium-containing cationic block of 4-vinylbenzyltributylphosphonium chloride induced electrostatic nucleic acid complexation. RAFT polymerization generated well-defined stabilizing blocks (M(n) = 25000 g/mol) and subsequent chain extension synthesized diblock copolymers with DPs of 25, 50, and 75 for the phosphonium-containing block. All diblock copolymers bound DNA efficiently at ± ratios of 1.0 in H(2)O, and polyplexes generated at ± ratios of 2.0 displayed hydrodynamic diameters between 100 and 200 nm. The resulting polyplexes exhibited excellent colloidal stability under physiological salt or serum conditions, and they maintained constant hydrodynamic diameters over 24 h. Cellular uptake studies using Cy5-labeled DNA confirmed reduced cellular uptake in COS-7 and HeLa cells and, consequently, resulted in low transfection in these cell lines. Serum transfection in HepaRG cells, which are a predictive cell line for in vivo transfection studies, showed successful transfection using all diblock copolymers with luciferase expression on the same order of magnitude as Jet-PEI. All diblock copolymers exhibited low cytotoxicity (>80% cell viability). Promising in vitro transfection and cytotoxicity results suggest future studies involving the in vivo applicability of these phosphonium-based diblock copolymer delivery vehicles.     

Physicochemical characterization of thermoresponsive poly(N-isopropylacrylamide)-poly(ethylene imine) graft copolymers

Synthetic polycations have shown promise as gene delivery vehicles but suffer from an unacceptable toxicity and low transfection efficiency. Novel architectures are being explored to increase transfection efficiency, including copolymers with a thermoresponsive character. The physicochemical characterization of a family of copolymers comprising a core of the cationic polymer poly(ethylene imine) (PEI) with differing thermoresponsive poly( N-isopropylacrylamide) (PNIPAM) grafts has been carried out using pulsed-gradient spin-echo NMR (PGSE-NMR) and small-angle neutron scattering (SANS). For the copolymers that have longer chain PNIPAM grafts, there is clear evidence of the collapse of the grafts with increasing temperature and the associated emergence of an attractive interpolymer interaction. These facets depend on the number of PNIPAM grafts attached to the PEI core. While a collapse in the smaller PNIPAM grafts is observed for the third polymer, there is no appearance of the interpolymer attractive interaction. These observations provide further insight into the association behavior of these copolymers, which is fundamental to developing a full understanding of how they interact with nucleic acids. Furthermore, the differing behaviors of the three copolymers over temperatures in which the PNIPAM blocks undergo coil-to-globule transitions is indicative of changes in the presentation of charged-core and hydrophobic chain components, which are key factors affecting nucleic acid binding and, ultimately, cell transfection ability.     

Antigen-decorated shell cross-linked nanoparticles: synthesis, characterization, and antibody interactions

Antigen-decorated shell cross-linked knedel-like nanoparticles (SCKs) were synthesized and studied as multivalent nanoscale surfaces from which antibody-binding units were presented in a manner that was designed to approach virus particle surfaces. The SCK nanostructures were fabricated with control over the number of antigenic groups, from mixed micellization of amphiphilic diblock copolymer building blocks that contained either an antigen (2,4-dinitrophenyl) or an ethylpropionate group at the hydrophilic alpha-chain terminus. Amphiphilic diblock copolymers were synthesized by atom transfer radical polymerization of tert-butyl acrylate and methyl acrylate sequentially from either a 2,4-dinitrophenyl-functionalized initiator or ethyl 2-bromopropionate, followed by selective removal of the tert-butyl groups to afford 2,4-dinitrophenyl-poly(acrylic acid)60-b-poly(methyl acrylate)60 (DNP-PAA(60)-b-PMA60) and poly(acrylic acid)70-b-poly(methyl acrylate) (PAA70-b-PMA70). Micelles were assembled via addition of water to THF solutions of the polymers in 0:1, 1:1, and 1:0 molar ratios of DNP-PAA60-b-PMA60 to PAA70-b-PMA70, followed by dialysis against water. The acrylic acid groups of the micelle coronas were partially cross-linked (nominally 50%) with 2,2'-(ethylenedioxy)bis(ethylamine), in the presence of 1-(3'-dimethylaminopropyl)-3-ethylcarbodiimide methiodide. Following extensive dialysis against water, the 0%, 50%, and 100% dinitrophenylated shell cross-linked nanoparticles (DNP-SCKs) were characterized with dynamic light scattering (DLS), transmission electron microscopy (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), infrared and UV-vis spectroscopies, and analytical ultracentrifugation (AU). The surface accessibility and bioavailability of the DNP units upon the DNP-SCKs were investigated by performing quenching titrations of fluorescein-labeled IgE antibody in solution and degranulation of IgE sensitized RBL-2H3 cells. The DNP antigens proved to be surface-available and able to form multivalent bonds with IgE antibodies, causing degranulation.     

Association behavior of biotinylated and non-biotinylated poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate)

Biotinylated and non-biotinylated copolymers of poly(ethylene oxide) (PEO) and poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA) were synthesized by the atom transfer radical polymerization technique. The chemical compositions of the copolymers as determined by NMR are represented by PEO(113)PDEAEMA(70) and biotin-PEO(104)PDEAEMA(93), respectively. The aggregation behavior of these polymers in aqueous solutions at different pHs and ionic strengths was studied using a combination of potentiometric titration, dynamic light scattering, static light scattering, and transmission electron microscopy. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers form micelles at high pH with hydrodynamic radii (R(h)) of about 19 and 23 nm, respectively. At low pH, the copolymers are dispersed as unimers in solution with R(h) values of about 6-7 nm. However, at a physiological salt concentration (c(s)) of about 0.16 M NaCl and a pH of 7-8, the copolymers form large loosely packed Gaussian chains, which were not present at the low c(s) of 0.001 M NaCl. The critical micelle concentrations (cmc's) and the cytotoxicities of the copolymers were investigated to determine a suitable polymer concentration range for future biological applications. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers possess identical cmc values of about 0.0023 mg/g, while the cytotoxicity test indicated that the copolymers are not toxic up to 0.05 mg/g (>83% cell survival at this concentration).     

Novel preparation method for poly(L-lactide)-based block copolymers: extended chain crystallites as a solid-state macro-coinitiator

A novel synthetic method for poly(L-lactide) (PLLA)-based diblock copolymers was developed by the use of PLLA extended chain crystallites (or crystalline residues) as a solid-state macro-coinitiator. In this study, we showed one example, i.e., a synthesis of diblock copolymer composed of a crystalline PLLA chain and an amorphous poly(DL-lactide) chain by ring-opening polymerization of DL-lactide initiated with stannous octoate (i.e., tin(II) 2-ethylhexanoate) in the presence of PLLA extended chain crystallites. The PLLA extended chain crystallites were prepared by hydrolytic degradation of crystallized PLLA films at 97 degrees C for 70 h. The chains inside the extended chain crystallites are expected to be protected from transesterfication reaction. Gel permeation chromatography, polarimetry, 1H NMR spectroscopy, wide-angle X-ray scattering, and differential scanning calorimetry revealed that the diblock copolymer poly(L-lactide-block-DL-lactide) was successfully prepared without significant transesterification.     

Biodegradable polycarbonate-b-polypeptide and polyester-b-polypeptide block copolymers: synthesis and nanoparticle formation towards biomaterials

The amino poly(trimethylene carbonate)-NHt-Boc (PTMC-NHt-Boc) and poly(epsilon-caprolactone)-NH -Boc (PCL-NHt-Boc) were synthesized by ring-opening polymerization (ROP) of TMC or CL and subsequently deprotected into the corresponding PTMC-NH2 and PCL-NH2. These functional homopolymers were used as macroinitiators for the ROP of gamma-benzyl-L-glutamate N-carboxyanhydride (BLG), consequently, giving the respective diblock copolymers PTMC-b-PBLG and PCL-b-PBLG in almost quantitative yields. The (co)polymers have been characterized by NMR and SEC analyses. DSC and IR studies confirmed the block structure of the copolymers and highlighted a phase separation between the rigid peptide (alpha-helix conformation) and the more flexible polyester segments. The self-assembly and the degradation behaviors of the copolymers depended on the nature of the polyester block and on the copolymer composition. Nanoparticles obtained from PBLG block copolymers were twice smaller ( RH < 100 nm) than those formed from PTMC and PCL homopolymers. Finally, their enzymatic degradation revealed that PTMC nanoparticles degraded faster than those made of PCL.     

Synthesis, characterization, and bioavailability of mannosylated shell cross-linked nanoparticles

Saccharide-functionalized shell cross-linked (SCK) polymer micelles designed as polyvalent nanoscaffolds for selective interactions with receptors on Gram negative bacteria were constructed from mixed micelles composed of poly(acrylic acid-b-methyl acrylate) and mannosylated poly(acrylic acid-b-methyl acrylate). The mannose unit was conjugated to the hydrophilic chain terminus of the amphiphilic diblock copolymer precursor, from which the SCK nanoparticles were derived, by the growth of the diblock copolymer from a mannoside functionalized atom transfer radical polymerization (ATRP) initiator. Mixed micelle formation between the amphiphilic diblock copolymer and mannosylated amphiphilic diblock copolymer was followed by condensation-based cross-linking between the acrylic acid residues present in the periphery of the polymer micelles to afford SCK nanoparticles. SCKs presenting variable numbers of mannose functionalities were prepared from mixed micelles of controlled stoichiometric ratios of mannosylated and nonmannosylated diblock copolymers. The polymer micelles and SCKs were characterized by dynamic light scattering (DLS), electrophoretic light scattering, atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). Surface availability and bioactivity of the mannose units were evaluated by interactions of the nanostructures with the model lectin Concanavalin A via DLS studies, with red blood cells (rabbit) via agglutination inhibition assays and with bacterial cells (E. coli) via TEM imaging.     

Thermoreversible hydrogels from RAFT-synthesized BAB triblock copolymers: steps toward biomimetic matrices for tissue regeneration

Narrowly dispersed, temperature-responsive BAB block copolymers capable of forming physical gels under physiological conditions were synthesized via aqueous reversible addition fragmentation chain transfer (RAFT) polymerization. The use of a difunctional trithiocarbonate facilitates the two-step synthesis of BAB copolymers with symmetrical outer blocks. The outer B blocks of the triblock copolymers consist of poly(N-isopropylacrylamide) (PNIPAM) and the inner A block consists of poly(N,N-dimethylacrylamide). The copolymers form reversible physical gels above the phase transition temperature of PNIPAM at concentrations as low as 7.5 wt % copolymer. Mechanical properties similar to collagen, a naturally occurring polypeptide used as a three-dimensional in vitro cell growth scaffold, have been achieved. Herein, we report the mechanical properties of the gels as a function of solvent, polymer concentration, and inner block length. Structural information about the gels was obtained through pulsed field gradient NMR experiments and confocal microscopy.     

Thermally induced conformation change of succinoglycan in aqueous sodium chloride

Static and dynamic light scattering, viscosity, and optical rotation measurements have been made at eight different temperatures between 25 and 75 degrees C on two succinoglycan samples (sodium salt) with weight-average molecular weights M(w) of 7.14 x 10(5) and 3.54 x 10(5) (at 25 degrees C) in 0.01 M aqueous NaCl to investigate the thermally induced order-disorder conformation change of the polysaccharide. Additionally, viscometry and polarimetry have been performed for a sodium salt sample (M(w) = 4.55 x 10(5) at 25 degrees C) whose M(w), z-average radius of gyration (z)(1/2), and hydrodynamic radius R(H) in the aqueous salt had been determined previously. As the temperature increases, M(w), (z)(1/2), R(H), and the intrinsic viscosity for every sample sharply decrease around 55 degrees C where the specific rotation at 300 nm sigmoidally increases. In particular, M(w) at 25 degrees C (i.e., in the ordered helical state) is twice as large as that at 75 degrees C (i.e., in the disordered state). These findings substantiate that the ordered structure is composed of two chains and hence is a double helix. Data analysis shows that this helix at 25 degrees C is characterized by an unperturbed wormlike chain with a helix pitch of about 2 nm (per repeating unit) and a persistence length of about 50 nm and that upon heating, it dissociates directly (i.e., in all-or-none fashion) to disordered chains of a similar contour length but with a much smaller persistence length of about 10 nm. The temperature dependence of the light scattering second viral coefficient is discussed in relation to the association of disordered chains in the cooling process.     

Direct determination of the π-helix structure and helix transition behavior of poly(β-phenethyl l-aspartate) via synchrotron X-ray diffraction

The helix-sense inversions of poly(β-phenethyl l -aspartate) (2P) and diblock copolymers (2P-3P), with 2P and poly(β-phenylpropyl l -aspartate) (3P) blocks, were studied in their solid states using synchrotron wide-angle X-ray diffraction and small-angle X-ray scattering. The characteristic parameters of the π-helix structure of 2P were directly determined in situ after the helix transition at a high temperature. In the 2P-3P block copolymers, the main chains of the 3P blocks initially convert from right- to left-handed α-helices, and then the 2P blocks convert irreversibly from right-handed α-helices to left-handed π-helices. The chemical structures of the side chains of poly(l -aspartic acid ester)s significantly affect their helix transition behaviors.     

Synthesis and characterizations of amphiphilic poly(L-lactide)-grafted chondroitin sulfate copolymer and its application as drug carrier

In this investigation, new biodegradable brush-like amphiphilic copolymers were synthesized by ring opening polymerization. Poly(L-lactide) (PLLA) was grafted onto chondroitin sulfate (CS), which is one of the physiologically significant specific glycosaminoglycans (GAGs), using a tin octanoate [Sn(Oct)2] catalyst in DMSO. The hydroxyl groups of the chondroitin sulfate were used as initiating groups. These functional groups enable specific mucoadhesion or receptor recognition. The degree of substitution (DS), the degree of polymerization (DP) and the chondroitin sulfate content (from 1.1 to 15.4%) were analyzed by 1H NMR. The characteristics of these grafted copolymers, including the structure, the thermal properties and biodegradability, etc., were examined with respect to CS content. Meanwhile, the amphiphilic core (PLLA)-corona (CS) nanoparticles, with size smaller than 200 nm, was examined by dynamic light scattering (DLS). Zeta potential analysis exhibited the value in the range -18.3 to -49.4 mV. The morphologies of the nanoparticles were observed by field-emission scanning electron microscopy (FE-SEM). The nanoparticles with lower cytotoxicity were examined by MTT assay. Furthermore, the in vitro BSA release kinetics of those CSn-PLLA nanoparticles was also determined in this study.     

Biosynthesis of fluorescent gold nanoparticles using an edible freshwater red alga,Lemanea fluviatilis (L.) C.Ag. and antioxidant activity of biomatrix loaded nanoparticles

Biosynthesis of gold nanoparticles has been accomplished via reduction of an aqueous chloroauric acid solution with the dried biomass of an edible freshwater epilithic red alga, Lemanea fluviatilis (L.) C.Ag., as both reductant and stabilizer. The synthesized nanoparticles were characterized by UV–visible, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), and dynamic light scattering (DLS) studies. The UV–visible spectrum of the synthesized gold nanoparticles showed the surface plasmon resonance (SPR) at around 530 nm. The powder XRD pattern furnished evidence for the formation of face-centered cubic structure of gold having average crystallite size 5.9 nm. The TEM images showed the nanoparticles to be polydispersed, nearly spherical in shape and have sizes in the range 5–15 nm. The photoluminescence spectrum of the gold nanoparticles excited at 300 nm showed blue emission at around 440 nm. Gold nanoparticles loaded within the biomatrix studied using a modified 2,2-diphenyl-1-picrylhydrazyl (DPPH) method exhibited pronounced antioxidant activity.     

Phosphorylcholine-based pH-responsive diblock copolymer micelles as drug delivery vehicles: light scattering, electron microscopy, and fluorescence experiments

The micellization behavior of a diblock copolymer comprising a highly hydrophilic and biocompatible poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) corona-forming block and a pH-sensitive poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) core-forming block (PMPC-b-PDPA) has been studied by static and dynamic light scattering (SDLS), transmission electron microscopy (TEM), and potentiometry. Self-assembly of PMPC-b-PDPA copolymers with two different DPA volume fractions (phi(DPA)) leads to narrowly distributed and structurally distinct spherical micelles, as evidenced by their molecular weight (M(w,mic)), aggregation number (N(agg)), hydrodynamic radius (R(H)), corona width (W), and core radius (R(c)). The excellent potential of these pH-responsive micelles as nanosized drug delivery vehicles was illustrated by the encapsulation of dipyridamole (DIP), a model hydrophobic drug that dissolves in acid solutions and becomes insoluble above pH 5.8, which is comparable to the pK(a) of the PDPA block. The influence of micelle structure (namely M(w,mic), N(agg), R(H), W, and R(c)) on drug loading content, drug loading efficiency, partition coefficient, and release kinetics was investigated and confirmed by fluorescence spectroscopy studies. The maximum dipyridamole loadings within PMPC(30)-b-PDPA(30) (R(H) = 14.0 nm; W = 4.8 nm; R(c) = 9.2 nm) and PMPC(30)-b-PDPA(60) (R(H) = 27.1 nm; W = 11.0 nm; R(c) = 16.1 nm) micelles were 7 and 12% w/w(p), respectively. This preferential solubilization of DIP into micelles formed by copolymer chains having longer core-forming blocks (i.e., possessing larger core volumes) reflects the larger partition coefficient (K(V)) of DIP between the aqueous phase and PMPC(30)-b-PDPA(60) micelles (K(V) = 5.7 x 10(4)) compared to PMPC(30)-b-PDPA(30) micelles (K(V) = 1.1 x 10(4)). This enhanced ability of PMPC(30)-b-PDPA(60) aggregates to entrap/stabilize small hydrophobic molecules also produces slower release kinetics. Rapid release can be triggered by lowering the pH to induce micellar dissociation.     

pH-responsive micelles and vesicles nanocapsules based on polypeptide diblock copolymers

The self-assembly of well-defined polypeptide-based diblock copolymers into micelles and vesicles is presented. The stimuli-responsive behavior of polypeptides to pH and ionic strength is used to produce stimuli-responsive nanoparticles with controlled size and shape. Results focusing on micelles and vesicles obtained from polypeptide-based diblock copolymers that are particularly promising for biomedical applications are detailed by means of static and dynamic light scattering analysis, UV circular dichroism, NMR and small angle neutron scattering experiments. Also systems able to form vesicles with a narrow size distribution at basic and acid pH going through a single molecule intermediate state are presented. These nanoparticles are particularly interesting for encapsulation and delivery purpose at a controlled pH.     

Diblock copolymers based on dihydroxyacetone and ethylene glycol: synthesis, characterization, and nanoparticle formulation

Polymeric biomaterials have played an integral role in tissue engineering, biomedical devices, and targeted drug delivery. Block copolymers are especially important because their physical and chemical properties can be controlled by adjusting the ratio, size, and type of constituting blocks. Herein, the synthesis and characterization of diblock copolymers composed of poly(ethylene glycol) and a polycarbonate based on the metabolic intermediate, dihydroxyacetone, are reported. The length of the dihydroxyacetone-based block was controlled by adjusting the reactant feed ratios and initiator injection conditions. Intermediates and final products were characterized via (1)H NMR, GPC, DSC, TGA, and diffusion-ordered NMR spectroscopy. The dihydroxyacetone-based hompolymer is insoluble in water and most organic solvents, but is hydrophilic in nature. This, coupled with poly(ethylene glycol)'s solubility characteristics, allows the block copolymer to form nanoparticles in aqueous and organic anti-solvents. Dynamic light scattering and TEM results indicated the formation of spherical nanoparticles.     

Self-assembling diblock copolymers of poly[N-(2-hydroxypropyl)methacrylamide] and a beta-sheet peptide

The self-assembly of hybrid diblock copolymers composed of poly(HPMA) and beta-sheet peptide P11 (CH(3)CO-QQRFQWQFEQQ-NH(2)) blocks was investigated. Copolymers were synthesized via thiol-maleimide coupling reaction, by conjugation of semitelechelic poly(HPMA)-SH with maleimide-modified beta-sheet peptide. As expected, CD and CR binding studies showed that the peptide block imposed its beta-sheet structural arrangement on the structure of diblock copolymers. TEM and AFM proved that peptide and these copolymers had the ability to self-assemble into fibrils.     

Gold nanoparticles induce surface morphological transformation in polyurethane and affect the cellular response

Nanocomposites from a hexamethylene diisocyanate (HDI)-based polyester-type waterborne polyurethane (PU) containing different amounts (17.4-174 ppm) of gold (Au) nanoparticles (approximately 5 nm) were prepared. The microstructure and physiochemical properties of the nanocomposites were characterized. The cell attachment and proliferation, platelet activation, and bacterial adhesion on the nanocomposites were evaluated. Gold nanoparticles in small amounts induced significant changes in surface morphology and domain structures, from hard segment lamellae to soft segment micelles. These changes resembled the morphological transformation among different mesophases occurred in diblock copolymers. Better cellular proliferation, lower platelet activation, and reduced bacterial adhesion were demonstrated for the PU nanocomposite with 43.5 or 65 ppm of Au than the pure PU or the nanocomposite containing a different amount of Au. The different cellular response on PU-Au nanocomposites was attributed to the extensively modified surface morphology and phase separation in the presence of a small amount of Au nanoparticles.     

Amphiphilic poly(L-lactide)-b-dendritic poly(L-lysine)s synthesized with a metal-free catalyst and new dendron initiators: chemical preparation and characterization

This study presents investigations on new approaches to novel biodegradable amphiphilic poly(L-lactide)-b-dendritic poly(L-lysine)s bearing well-defined structures. First, two new Boc-protected poly(L-lysine) dendron initiators G(2)OH 4 (generation = 2) and G(3)OH 6 (generation = 3) with hydroxyl end functional groups were efficiently derived from corresponding precursors 3 and 5 via methyl ester substitution with ethanolamine. Subsequently, two series of new diblock copolymers of poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s (S1-S2, S3-S4) were prepared in chloroform through ring-opening copolymerization of poly(L-lactide)s with a metal-free catalyst of organic 4-(dimethylamino) pyridine (DMAP) in the presence of a corresponding new poly(L-lysine) dendron initiator. Further, molecular structures of the prepared new dendron initiators as well as those of poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s bearing different dendron blocks and PLLA lengths were examined by means of nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), mass spectrometry (ESI-MS, MALDI-FTMS), and thermal gravimetric analysis (TGA). The results demonstrated successful formation of the synthetic precursors, functional dendron initiators, and new diblock copolymers. In addition, the very narrow molecular weight distributions (PDI = 1.10-1.14) of these poly(L-lactide)-b-dendritic Boc-protected poly(L-lysine)s further indicated their well-defined molecular structures. After the efficient Boc-deprotection for the dendron amino groups with TFA/CH(2)Cl(2), new diblock poly(L-lactide)-b-dendritic poly(L-lysine)s bearing lipophilic PLLA and hydrophilic dendritic PLL were finally prepared. It was noteworthy that the MALDI-FTMS result showed that no appreciable intermolecular chain transesterification happened during the ROP of L-lactide catalyzed by the DMAP. Moreover, self-assembly of these new biodegradable amphiphilic copolymers in diverse solvents were also preliminarily studied.     

"Schizophrenic" micellization associated with coil-to-helix transitions based on polypeptide hybrid double hydrophilic rod-coil diblock copolymer

A polypeptide hybrid double hydrophilic diblock copolymer (DHBC), poly( N-isopropylacrylamide)- b-poly( l-glutamic acid) (PNIPAM- b-PLGA), was synthesized via the ring-opening polymerization of gamma-benzyl- l-glutamate N-carboxyanhydride (BLG-NCA) using monoamino-terminated PNIPAM as the macroinitiator, followed by deprotection of benzyl groups under alkaline conditions. Containing a thermoresponsive PNIPAM block and a pH-responsive PLGA block, the obtained polypeptide hybrid diblock copolymer molecularly dissolves in aqueous solution at alkaline pH and room temperature but supramolecularly self-assembles into PNIPAM-core micelles at alkaline pH and elevated temperatures and PLGA-core micelles at acidic pH and room temperature accompanied with coil-to-helix transition of the PLGA sequence. The pH- and thermoresponsive "schizophrenic" micellization behavior of PNIPAM- b-PLGA diblock copolymer has been investigated by (1)H NMR, optical transmittance, fluorescence probe measurement, transmission electron microscopy (TEM), dynamic and static laser light scattering (LLS), and circular dichroism (CD) spectroscopy. Moreover, the micellization process was investigated employing stopped-flow light scattering technique. The pH-induced micelle growth of PNIPAM- b-PLGA in aqueous solution exhibits drastically different kinetics compared to that of conventional pH-responsive DHBCs, probably due to the stabilization effects exerted by the formed alpha-helix secondary structures within the PLGA core at low pH. Exhibiting "schizophrenic" micellization, the polypeptide sequence of PNIPAM- b-PLGA can either locate within micelle cores or stabilizing coronas. The incorporation of polypeptide block into DHBCs can endow them with structural versatility, tunable spatial arrangement of chain segments within self-assembled nanostructures, and broader applications in the field of biomedicines.