Increasing protein stability: Importance of ΔCp and the denatured state

Increasing the conformational stability of proteins is an important goal for both basic research and industrial applications. In vitro selection has been used successfully to increase protein stability, but more often site‐directed mutagenesis is used to optimize the various forces that contribute to protein stability. In previous studies, we showed that improving electrostatic interactions on the protein surface and improving the β‐turn sequences were good general strategies for increasing protein stability, and used them to increase the stability of RNase Sa. By incorporating seven of these mutations in RNase Sa, we increased the stability by 5.3 kcal/mol. Adding one more mutation, D79F, gave a total increase in stability of 7.7 kcal/mol, and a melting temperature 28°C higher than the wild‐type enzyme. Surprisingly, the D79F mutation lowers the change in heat capacity for folding, ΔC_p, by 0.6 kcal/mol/K. This suggests that this mutation stabilizes structure in the denatured state ensemble. We made other mutants that give some insight into the structure present in the denatured state. Finally, the thermodynamics of folding of these stabilized variants of RNase Sa are compared with those observed for proteins from thermophiles.     

Exploring additivity effects of double mutations on the binding affinity of protein‐protein complexes

Additivity in binding affinity of protein‐protein complexes refers to the change in free energy of binding (ΔΔG_bind) for double (or multiple) mutations which is approximately equal to the sum of their corresponding single mutation ΔΔG_bind values. In this study, we have explored the additivity effect of double mutants, which shows a linear relationship between the binding affinity of double and sum of single mutants with a correlation of 0.90. However, the comparison of ΔΔG_bind values showed a mean absolute deviation of 0.86 kcal/mol, and 25.6% of the double mutants show a deviation of more than 1 kcal/mol, which are identified as non‐additive. The additivity effects have been analyzed based on the influence of structural features such as accessible surface area, long range order, binding propensity change, surrounding hydrophobicity, flexibility, atomic contacts between the mutations and distance between the 2 mutations. We found that non‐additive mutations tend to be closer to each other and have more contacts. We have also used machine learning methods to discriminate additive and non‐additive mutations using structure‐based features, which showed the accuracies in the range of 0.77–0.92 for protein‐protein complexes belonging to different functions. Further, we have compared the additivity effects of protein stability along with binding affinity and explored the similarities and differences between them. The results obtained in this study provide insights into the effects of various structural features on binding affinity of double mutants, and will aid the development of accurate methods to predict the binding affinity of double mutants.     

DynaMut2: Assessing changes in stability and flexibility upon single and multiple point missense mutations

Predicting the effect of missense variations on protein stability and dynamics is important for understanding their role in diseases, and the link between protein structure and function. Approaches to estimate these changes have been proposed, but most only consider single‐point missense variants and a static state of the protein, with those that incorporate dynamics are computationally expensive. Here we present DynaMut2, a web server that combines Normal Mode Analysis (NMA) methods to capture protein motion and our graph‐based signatures to represent the wildtype environment to investigate the effects of single and multiple point mutations on protein stability and dynamics. DynaMut2 was able to accurately predict the effects of missense mutations on protein stability, achieving Pearson's correlation of up to 0.72 (RMSE: 1.02 kcal/mol) on a single point and 0.64 (RMSE: 1.80 kcal/mol) on multiple‐point missense mutations across 10‐fold cross‐validation and independent blind tests. For single‐point mutations, DynaMut2 achieved comparable performance with other methods when predicting variations in Gibbs Free Energy (ΔΔG) and in melting temperature (ΔT_m). We anticipate our tool to be a valuable suite for the study of protein flexibility analysis and the study of the role of variants in disease. DynaMut2 is freely available as a web server and API at http://biosig.unimelb.edu.au/dynamut2 .     

Synthetic constructs functionally mimicking ribonuclease A

The mechanism of hydrolysis of RNA substrates—diribonucleoside monophosphate CpA and decaribonucleotide UUCAUGUAAA—by chemical constructs functionally mimicking ribonuclease A was studied. It is shown that RNA cleavage by chemical RNases 2L2 and 2D3 proceeds similar to the RNase A-induced RNA hydrolysis through 2′,3′-cyclophosphate as an intermediate product. A comparison of hydrolyses of CpA in water and D₂O revealed an isotope effect (K _H/K _D=2.28), which implies acid-base catalysis at the limiting stage of the reaction. Two feasible mechanisms of RNA hydrolysis by chemical RNases (linear and adjacent) are discussed.     

Kinetic parameters of monoclonal antibodies ESH2, ESH4, ESH5, and ESH8 on coagulation factor VIII and their influence on factor VIII activity

The murine monoclonal antibodies ESH2, ESH4, ESH5, and ESH8 specifically bind and inhibit the procoagulant activity of human coagulation factor VIII (FVIII). They are frequently used as a model of inhibitors which are raised against injected FVIII in about 25% of hemophiliacs as a serious side effect of substitution therapy. However, binding kinetics of the interaction of these antibodies with FVIII and their influence on FVIII activity (inhibition) have not yet been examined systematically. For this, we examined association and dissociation of protein:antibody interaction using surface plasmon resonance (SPR) and determined their ability to inhibit the FVIII activity in a one‐stage and a two‐stage assay. SPR‐analysis revealed that the equilibrium dissociation constants (K_D) of ESH8 and ESH4 are low and in a similar range (ESH8: K_D(ESH8) = 0.542 nM; ESH4: K_D(ESH4) = 0.761 nM). A 5.7 times higher K_D than for ESH4 was observed for ESH2 (4.33 nM), whereas ESH5 showed the highest K_D of 28.8 nM. In accordance with the lowest K_D, ESH8, and ESH4 reduced FVIII activity of normal human plasma almost completely in a one‐stage clot inhibition assay (ESH8: 91.9%; ESH4: 90.1%). However, ESH8 inhibited FVIII activity more efficiently as only 1.0 µg/ml ESH8 was sufficient to obtain maximum inhibition compared to up to 600 µg/ml of ESH4. Despite its attenuated K_D, ESH2 inhibits FVIII:C still efficiently, reducing 61.3% of FVIII activity at a concentration of 9 µg/ml in the one‐stage clotting assay. However, a discrepancy of inhibitory efficiency was found depending on the method used to measure FVIII activity. These effects seem to be mainly caused by differences of activation time of FVIII during both FVIII activity assays. The systematic assessment of these results should support FVIII interaction studies, and can provide data to rationally test peptides/mimotopes to remove or neutralize inhibitors of FVIII activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Recognition of specific and nonspecific DNA by human lactoferrin

The general principles of recognition of nucleic acids by proteins are among the most exciting problems of molecular biology. Human lactoferrin (LF) is a remarkable protein possessing many independent biological functions, including interaction with DNA. In human milk, LF is a major DNase featuring two DNA‐binding sites with different affinities for DNA. The mechanism of DNA recognition by LF was studied here for the first time. Electrophoretic mobility shift assay and fluorescence measurements were used to probe for interactions of the high‐affinity DNA‐binding site of LF with a series of model‐specific and nonspecific DNA ligands, and the structural determinants of DNA recognition by LF were characterized quantitatively. The minimal ligands for this binding site were orthophosphate (K_i = 5 mM), deoxyribose 5'‐phosphate (K_i = 3 mM), and different dNMPs (K_i = 0.56–1.6 mM). LF interacted additionally with 9–12 nucleotides or nucleotide pairs of single‐ and double‐stranded ribo‐ and deoxyribooligonucleotides of different lengths and sequences, mainly through weak additive contacts with internucleoside phosphate groups. Such nonspecific interactions of LF with noncognate single‐ and double‐stranded d(pN)₁₀ provided ~6 to ~7.5 orders of magnitude of the enzyme affinity for any DNA. This corresponds to the Gibbs free energy of binding (ΔG⁰) of ?8.5 to ?10.0 kcal/mol. Formation of specific contacts between the LF and its cognate DNA results in an increase of the DNA affinity for the enzyme by approximately 1 order of magnitude (K_d = 10 nM; ΔG⁰ ≈ ?11.1 kcal/mol). A general function for the LF affinity for nonspecific d(pN)_n of different sequences and lengths was obtained, giving the K_d values comparable with the experimentally measured ones. A thermodynamic model was constructed to describe the interactions of LF with DNA. Copyright © 2013 John Wiley & Sons, Ltd.     

Structure and regulation of the Salmonella typhimurium rnc-era-recO operon

The Escherichia coli rnc-era-recO operon encodes ribonuclease III (RNase III; a dsRNA endonuclease involved in rRNA and mRNA processing and decay), Era (an essential G-protein of unknown function) and RecO (involved in the RecF homologous recombination pathway). Expression of the rnc and era genes is negatively autoregulated: RNase III cleaves the rncO ‘operator’ in the untranslated leader, destabilizing the operon mRNA. As part of a larger effort to understand RNase III and Era structure and function, we characterized rnc operon structure, function and regulation in the closely related bacterium Salmonella typhimurium. Construction of a S typhimurium strain conditionally defective for RNase III and Era expression showed that Era is essential for cell growth. This mutant strain also enabled selection of recombinant clones containing the intact S typhimurium rnc-era-recO operon, whose nucleotide sequence, predicted protein sequence, and predicted rncO RNA secondary structure were all highly conserved with those of E coli. Furthermore, genetic and biochemical analysis revealed that S typhimurium rnc gene expression is negatively autoregulated by a mechanism very similar or identical to that in E coli, and that the cleavage specificities of RNase III_S.t. and RNase III_E.c. are indistinguishable with regard to rncO cleavage and S typhimurium 23S rRNA fragmentation in vivo.     

Engineering of a bacterial tyrosinase for improved catalytic efficiency towards D‐tyrosine using random and site directed mutagenesis approaches

The tyrosinase gene from Ralstonia solanacearum (GenBank NP518458) was subjected to random mutagenesis resulting in tyrosinase variants (RVC10 and RV145) with up to 3.2‐fold improvement in k_cat, 5.2‐fold lower K_m and 16‐fold improvement in catalytic efficiency for D ‐tyrosine. Based on RVC10 and RV145 mutated sequences, single mutation variants were generated with all variants showing increased k_cat for D ‐tyrosine compared to the wild type (WT). All single mutation variants based on RV145 had a higher k_cat and K_m value compared to the RV145 and thus the combination of four mutations in RV145 was antagonistic for turnover, but synergistic for affinity of the enzyme for D ‐tyrosine. Single mutation variant 145_V153A exhibited the highest (6.9‐fold) improvement in k_cat and a 2.4‐fold increase in K_m compared to the WT. Two single mutation variants, C10_N322S and C10_T183I reduced the K_m up to 2.6‐fold for D ‐tyrosine but one variant 145_V153A increased the K_m 2.4‐fold compared to the WT. Homology based modeling of R. solanacearum tyrosinase showed that mutation V153A disrupts the van der Waals interactions with an α‐helix providing one of the conserved histidine residues of the active site. The k_cat and K_m values for L ‐tyrosine decreased for RV145 and RVC10 compared to the WT. RV145 exhibited a 2.1‐fold high catalytic efficiency compared to the WT which is a 7.6‐fold lower improvement compared to D ‐tyrosine. RV145 exhibited a threefold higher monophenolase:diphenolase activity ratio for D ‐tyrosine:D ‐DOPA and a 1.4‐fold higher L ‐tyrosine:L ‐DOPA activity ratio compared to the WT. Biotechnol. Bioeng. 2013; 110: 1849–1857. © 2013 Wiley Periodicals, Inc.     

Conformational analysis and design of cross-strand disulfides in antiparallel β-sheets

Cross‐strand disulfides bridge two cysteines in a registered pair of antiparallel β‐strands. A nonredundant data set comprising 5025 polypeptides containing 2311 disulfides was used to study cross‐strand disulfides. Seventy‐six cross‐strand disulfides were found of which 75 and 1 occurred at non‐hydrogen‐bonded (NHB) and hydrogen‐bonded (HB) registered pairs, respectively. Conformational analysis and modeling studies demonstrated that disulfide formation at HB pairs necessarily requires an extremely rare and positive χ¹ value for at least one of the cysteine residues. Disulfides at HB positions also have more unfavorable steric repulsion with the main chain. Thirteen pairs of disulfides were introduced in NHB and HB pairs in four model proteins: leucine binding protein (LBP), leucine, isoleucine, valine binding protein (LIVBP), maltose binding protein (MBP), and Top7. All mutants LIVBP T247C V331C showed disulfide formation either on purification, or on treatment with oxidants. Protein stability in both oxidized and reduced states of all mutants was measured. Relative to wild type, LBP and MBP mutants were destabilized with respect to chemical denaturation, although the sole exposed NHB LBP mutant showed an increase of 3.1°C in T _m . All Top7 mutants were characterized for stability through guanidinium thiocyanate chemical denaturation. Both exposed and two of the three buried NHB mutants were appreciably stabilized. All four HB Top7 mutants were destabilized (ΔΔG ⁰ = ?3.3 to ?6.7 kcal/mol). The data demonstrate that introduction of cross‐strand disulfides at exposed NHB pairs is a robust method of improving protein stability. All four exposed Top7 disulfide mutants showed mild redox activity. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

On the calculation of binding free energies using continuum methods: Application to MHC class I protein-peptide interactions

This paper describes a methodology to calculate the binding free energy (ΔG) of a protein-ligand complex using a continuum model of the solvent. A formal thermodynamic cycle is used to decompose the binding free energy into electrostatic and non-electrostatic contributions. In this cycle, the reactants are discharged in water, associated as purely nonpolar entities, and the final complex is then recharged. The total electrostatic free energies of the protein, the ligand, and the complex in water are calculated with the finite difference Poisson-Boltzmann (FDPB) method. The nonpolar (hydrophobic) binding free energy is calculated using a free energy-surface area relationship, with a single alkane/water surface tension coefficient (γ_aw). The loss in backbone and side-chain configurational entropy upon binding is estimated and added to the electrostatic and the nonpolar components of ΔG. The methodology is applied to the binding of the murine MHC class I protein H-2K^b with three distinct peptides, and to the human MHC class I protein HLA-A2 in complex with five different peptides. Despite significant differences in the amino acid sequences of the different peptides, the experimental binding free energy differences (ΔΔG_exp) are quite small (<0.3 and <2.7 kcal/mol for the H-2K^b and HLA-A2 complexes, respectively). For each protein, the calculations are successful in reproducing a fairly small range of values for ΔΔG_calc (<4.4 and <5.2 kcal/mol, respectively) although the relative peptide binding affinities of H-2K^b and HLA-A2 are not reproduced. For all protein-peptide complexes that were treated, it was found that electrostatic interactions oppose binding whereas nonpolar interactions drive complex formation. The two types of interactions appear to be correlated in that larger nonpolar contributions to binding are generally opposed by increased electrostatic contributions favoring dissociation. The factors that drive the binding of peptides to MHC proteins are discussed in light of our results.     

Insulin receptor‐insulin interaction kinetics using multiplex surface plasmon resonance

Type 2 diabetes affects millions of people worldwide, and measuring the kinetics of insulin receptor‐insulin interactions is critical to improving our understanding of this disease. In this paper, we describe, for the first time, a rapid, real‐time, multiplex surface plasmon resonance (SPR) assay for studying the interaction between insulin and the insulin receptor ectodomain, isoform A (eIR‐A). We used a scaffold approach in which anti‐insulin receptor monoclonal antibody 83–7 (Abcam, Cambridge, UK) was first immobilized on the SPR sensorchip by amine coupling, followed by eIR‐A capture. The multiplex SPR system (ProteOn XPR36?, Bio‐Rad Laboratories, Hercules, CA) enabled measurement of replicate interactions with a single, parallel set of analyte injections, whereas repeated regeneration of the scaffold between measurements caused variable loss of antibody activity. Interactions between recombinant human insulin followed a two‐site binding pattern, consistent with the literature, with a high‐affinity site (dissociation constant K_D1 = 38.1 ± 0.9 nM) and a low‐affinity site (K_D2 = 166.3 ± 7.3 nM). The predominantly monomeric insulin analogue Lispro had corresponding dissociation constants K_D1 = 73.2 ± 1.8 nM and K_D2 = 148.9 ± 6.1 nM, but the fit to kinetic data was improved when we included a conformational change factor in which the high‐affinity site was converted to the low‐affinity site. The new SPR assay enables insulin‐eIR‐A interactions to be followed in real time and could potentially be extended to study the effects of humoral factors on the interaction, without the need for insulin labeling. Copyright © 2013 John Wiley & Sons, Ltd.     

Isolation and characterization of herC, a mutation of Escherichia coli affecting maintenance of ColE1

Summary Two modes of ColE1 DNA replication are known, one dependent on RNase H, and the other RNase H independent. The cer114 mutant of the ColE1 replicon is defective in both modes and carries a single base pair alteration 95 by upstream of the replication origin. An Escherichia coli mutant which restored maintenance of the cer114 replicon was isolated. This host suppressor mutant is defective in RNase H and carries a herC, mutation located at 62 min of the E. coli chromosome. The herC, mutation is recessive to its wild-type allele and supports maintenance of the mutant replicon in the absence of RNase H. The herC, mutation alone conferred cold-sensitive growth, suggesting that the herC, gene product is essential for cell growth. The 1832 by E. coli DNA fragment, containing the wild-type allele of the herC, mutation, was cloned and an open reading frame for the HerC protein was determined.     

Candidacidal mechanism of a Leu/Lys‐rich α‐helical amphipathic model antimicrobial peptide and its diastereomer composed of D,L‐amino acids

We investigated the mechanism of candidacidal action of a Lys/Leu‐rich α‐helical model antimicrobial peptide (K₉L₈W) and its diastereomeric peptide (D₉‐K₉L₈W) composed of D ,L ‐amino acids. K₉L₈W killed completely Candida albicans within 30 min, but D₉‐K₉L₈W killed only 72% of C. albicans even after 100 min. Tryptophan fluorescence spectroscopy indicated that the fungal cell selectivity of D₉‐K₉L₈W is closely correlated with a selective interaction with the negatively charged PC/PE/PI/ergosterol (5:2.5:2.5:1, w/w/w/w) phospholipids, which mimic the outer leaflet of the plasma membrane of C. albicans. K₉L₈W was able to induce almost 100% calcein leakage from PC/PE/PI/ergosterol (5:2.5:2.5:1, w/w/w/w) liposomes at a peptide:lipid molar ratio of 1:16, whereas D₉‐K₉L₈W caused only 25% dye leakage even at a peptide:lipid molar ratio of 1:2. Confocal laser‐scanning microscopy revealed that FITC‐labeled D₉‐K₉L₈W penetrated the cell wall and cell membrane and accumulated inside the cells, whereas FITC‐labeled K₉L₈W did not penetrate but associated with the membranes. Collectively, our results demonstrated that the candidacidal activity of K₉L₈ W and D₉‐K₉L₈W may be due to the transmembrane pore/channel formation or perturbation of the fungal cytoplasmic membranes and the inhibition of intracellular functions, respectively. Finally, D₉‐K₉L₈W with potent anti‐Candida activity but no hemolytic activity may be potentially a useful lead compound for the development of novel antifungal agents. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

The crystal structure of ribonuclease A in complex with thymidine‐3′‐monophosphate provides further insight into ligand binding

Thymidine‐3′‐monophosphate (3′‐TMP) is a competitive inhibitor analogue of the 3′‐CMP and 3′‐UMP natural product inhibitors of bovine pancreatic ribonuclease A (RNase A). Isothermal titration calorimetry experiments show that 3′‐TMP binds the enzyme with a dissociation constant (K_d) of 15 μM making it one of the strongest binding members of the five natural bases found in nucleic acids (A, C, G, T, and U). To further investigate the molecular properties of this potent natural affinity, we have determined the crystal structure of bovine pancreatic RNase A in complex with 3′‐TMP at 1.55 Å resolution and we have performed NMR binding experiments with 3′‐CMP and 3′‐TMP. Our results show that binding of 3′‐TMP is very similar to other natural and non‐natural pyrimidine ligands, demonstrating that single nucleotide affinity is independent of the presence or absence of a 2′‐hydroxyl on the ribose moiety of pyrimidines and suggesting that the pyrimidine binding subsite of RNase A is not a significant contributor of inhibitor discrimination. Accumulating evidence suggests that very subtle structural, chemical, and potentially motional variations contribute to ligand discrimination in this enzyme. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

The Glycine Residues G551 and G1349 within the ATP-Binding Cassette Signature Motifs Play Critical Roles in the Activation and Inhibition of Cystic Fibrosis Transmembrane Conductance Regulator Channels by Phloxine B

The cystic fibrosis transmembrane conductance regulator (CFTR) protein contains a canonical ATP-binding cassette (ABC) signature motif, LSGGQ, in nucleotide binding domain 1 (NBD1) and a degenerate LSHGH in NBD2. Here, we studied the contribution of the conserved residues G551 and G1349 to the pharmacological modulation of CFTR chloride channels by phloxine B using iodide efflux and whole-cell patch clamp experiments performed on the following green fluorescent protein (GFP)-tagged CFTR: wild-type, delF508, G551D, G1349D, and G551D/G1349D double mutant. We found that phloxine B stimulates and inhibits channel activity of wild-type CFTR (K_s = 3.2 ± 1.6 μM, K_i = 38 ± 1.4 μM) and delF508 CFTR (K_s = 3 ± 1.8 μM, K_i = 33 ± 1 μM). However, CFTR channels with the LSGDQ mutated motif (mutation G551D) are activated (K_s = 2 ± 1.13 μM) but not inhibited by phloxine B. Conversely, CFTR channels with the LSHDH mutated motif (mutation G1349D) are inhibited (K_i = 40 ± 1.01 μM) but not activated by phloxine B. Finally, the double mutant G551D/G1349D CFTR failed to respond not only to phloxine B stimulation but also to phloxine B inhibition, confirming the importance of both amino acid locations. Similar results were obtained with genistein, and kinetic parameters were determined to compare the pharmacological effects of both agents. These data show that G551 and G1349 control the inhibition and activation of CFTR by these agents, suggesting functional nonequivalence of the signature motifs of NBD in the ABC transporter CFTR.     

Label‐free determination of protein–ligand binding constants using mass spectrometry and validation using surface plasmon resonance and isothermal titration calorimetry

We performed a systematic comparison of three label‐free methods for quantitative assessment of binding strengths of proteins interacting with small molecule ligands. The performance of (1) nanoelectrospray ionization mass spectrometry (nESI‐MS), (2) surface plasmon resonance (SPR), and (3) isothermal titration calorimetry (ITC) was compared for the determination of dissociation constants (K_D). The model system studied for this purpose was the human carbonic anhydrase I (hCAI) with eight known and well characterized sulfonamide inhibitors (Krishnamurthy et al., Chem. Rev. 2008, 108: 946–1051). The binding affinities of the inhibitors chosen vary by more than four orders of magnitude e.g., the K_D value determined for ethoxzolamide by nESI‐MS was 5 ± 1 nM and the K_D value for sulfanilamide was 145.7 ± 10.0 µM. The agreement of the determined K_D values by the three methods investigated was excellent for ethoxzolamide and benzenesulfonamide (variation with experimental error), good for acetazolamide and 4‐carboxybenzenesulfonamide (variation by ～ one order of magnitude), but poor for others e.g., sulpiride. The accuracies of the K_D values are determined, and advantages and drawbacks of the individual methods are discussed. Moreover, we critically evaluate the three examined methods in terms of ease of the measurement, sample consumption, time requirement, and discuss their limitations. Copyright © 2009 John Wiley & Sons, Ltd.     

Binding of spermine and ifenprodil to a purified,soluble regulatory domain of the N‐methyl‐d‐aspartate receptor

The binding of spermine and ifenprodil to the amino terminal regulatory (R) domain of the N‐methyl‐D ‐aspartate receptor was studied using purified regulatory domains of the NR1, NR2A and NR2B subunits, termed NR1‐R, NR2A‐R and NR2B‐R. The R domains were over‐expressed in Escherichia coli and purified to near homogeneity. The K_d values for binding of [¹⁴C]spermine to NR1‐R, NR2A‐R and NR2B‐R were 19, 140, and 33 μM, respectively. [³H]Ifenprodil bound to NR1‐R (K_d, 0.18 μM) and NR2B‐R (K_d, 0.21 μM), but not to NR2A‐R at the concentrations tested (0.1–0.8 μM). These K_d values were confirmed by circular dichroism measurements. The K_d values reflected their effective concentrations at intact NR1/NR2A and NR1/NR2B receptors. The results suggest that effects of spermine and ifenprodil on NMDA receptors occur through binding to the regulatory domains of the NR1, NR2A and NR2B subunits. The binding capacity of spermine or ifenprodil to a mixture of NR1‐R and NR2A‐R or NR1‐R and NR2B‐R was additive with that of each individual R domain. Binding of spermine to NR1‐R and NR2B‐R was not inhibited by ifenprodil and vice versa, indicating that the binding sites for spermine and ifenprodil on NR1‐R and NR2B‐R are distinct.     

Analysis of the ionization constants and heats of ionization of reduced and oxidized horse heart cytochrome c

Simultaneous curve fitting for the ionization parameters of oxidized and reduced horse heart cytochrome c in 0.15M KCl and 20°C yields values for the ionization constants (as pK′) and the heats of ionization (ΔH_i) which can reconstruct either the potentiometric or thermal titration curves. Reduced cytochrome c requires 8 sets of groups, whereas oxidized cytochrome c requires 10 sets of groups. The additional groups in the oxidized preparation appear to involve the ferriheme (pK′, 9.25; ΔH_i, 13.7 kcal/mol) and a tyrosine (pK′ ? 10.24) that is not present in the reduced form. The potentiometric and thermal difference curves (reduced – oxidized) involve the appearance of 17 kcal/mol centered at pH 9.7 and 5.8 kcal/mol centered at pH 4.9. The carboxyl groups in both species appear to be normal for the hydrogen-bonded form. Only one histidine has normal ionization properties (pK′, 6.7; ΔH_i, 7.5 kcal/mol), as do 17 of the lysine residues (pK′, 10.8; ΔH_i, 11.5 kcal/mol).     

Acid-Catalyzed nucleophilic substitution and racemization of 3-methoxy-N-desmethyldiazepam enantiomers in methanol

pK_a1 values of 3-methoxy-N-desmethyldiazepam in acetonitrile and methanol containing various acid concentrations were determined by spectrophotometry to be 3.5 and 1.3, respectively. Temperature-dependent racemization of enantiomeric 3-methoxy-N-desmethyldiazepam in methanol containing 0.5 M H₂SO₄ was studied by circular dichroism spectropolorimetry and the racemization reactions were found to follow apparent first-order kinetics. Thermodynamic parameters of the racemization reaction were found to be: E_act = 18.8 kcal/mol, and at 25°C: ΔH^? = 18.3 kcal/mol, ΔS^? = ?14.8 entropy unit, and ΔG^? = 22.7 kcal/mol, respectively. The racemization had an isotope effect (k_H/k_D) of 1.6 at 42°C. Based on the results of this report and those of earlier reports by other investigators, a nucleophilically solvated C3 carbocation intermediate resulting from either a P (plus) or an M (minus) conformation is proposed to be an intermediate and responsible for the stereoselective nucleophilic substitution and the subsequent racemization of 3-methoxy-N-desmethyldiazepam enantiomers. © 1993 Wiley-Liss, Inc.