Cytoskeletal elements in cotton seed hair developmentin vitro: Their possible regulatory role in cell wall organization

Summary The localization and orientation of cytoskeletal elements in developing cotton fibres were studied by the indirect immunofluorescence and the dry cleaving technique. Microtubules are transversely arranged to the cell axis, most probably in a flat helix, in the cortex of expanding fibres. Since the innermost deposited cellulose microfibrils always show primarily the same orientation it is postulated that the microtubules control the transverse deposition of the cellulose fibrils. Little further cell expansion takes place during secondary wall formation and the microfibril pattern corresponds to that of the cortical microtubules,e.g., in the steepness of their helicoidal turns. Microtubules with a length of 7–20 m were observed, probably they are longer. The importance of microtubule length on microfibril deposition is discussed. The density of microtubule packing is in the range of 8–14 m^-1 as in other comparable cell types. In contrast to the microtubules, actin filaments are most likely longitudinally oriented during different phases of fibre development. The dry cleaving technique reveals numerous coated pits in the plasma membrane which are not crossed by microtubules. They seem to be linked to the latter by filamentous structures.     

Cellulose microfibril orientation and cell shaping in developing guard cells of Allium: The role of microtubules and ion accumulation

Summary The role of microtubules and ions in cell shaping was investigated in differentiating guard cells of Allium using light and electron microscopy and cytochemistry. Microtubules appear soon after cytokinesis in a discrete zone close to the plasmalemma adjacent to the common wall between guard cells. The microtubules fan out from this zone, which corresponds to the future pore site, towards the other sides of the cell. Soon new cellulose microfibrils are deposited on the wall adjacent to the microtubules and oriented parallel to them. As the wall thickens, the shape of the cell shifts from cylindrical to kidney-like. Studies with polarized light show that guard cells gradually assume a birefringence pattern during development characteristic of wall microfibrils radiating away from the pore site. Retardation increases from 10 Å when cells just begin to take shape, to 80–100 Å at maturity. Both microfibril and microtubule orientation remain constant during development. Observations on aberrant cells including those produced under the influence of drugs such as colchicine, which leads to loss of microtubules, abnormal wall thickenings and disruption of wall birefringence, further support the role of microtubules in cell shaping through their function in the localization of wall deposition and the orientation of cellulose microfibrils in the new wall layer. Potassium first appears in guard mother cells before division and rapidly accumulates afterwards during cell shaping, as judged by the cobaltinitrite reaction. Some chloride and perhaps organic acid anions also accumulate. Thus, these ions, which are known to play a role in the function of mature guard cells, also seem to be important in the early growth and shaping of these cells.Abbreviations IPC isopropyl-N-phenylcarbamate - CB cytochalasin B - GMC guard mother cell - MTOC microtubule organizing center     

Establishing and maintaining axial growth: wall mechanical properties and the cytoskeleton

Organ morphology depends on cell placement and directional cell expansion. Microtubules are involved in both of these processes so genetic approaches to understand the role microtubules play in organ expansion are not straightforward. Our use of the temperature-sensitive mor1-1 mutants led to the surprising discovery that Arabidopsis thaliana (L.) Heynh. root cells can establish and maintain transverse cellulose texture without well organized microtubule arrays. This work also demonstrated that cells can lose the ability to expand anisotropically without losing transversely oriented cellulose microfibrils. We suggest that microtubule disruption affects the cells ability to generate long cellulose microfibrils, which may be essential for achieving growth anisotropy. Thus organ shape may depend not only on the orientation but also on the relative length of cellulose microfibrils during axis establishment and growth. More recent work has shown an important correlation between microtubule organization and the deposition patterns of the glycosylphosphatidylinositol (GPI)-anchored wall protein COBRA. Loss of microtubule organization is associated with the dissipation of transverse banding patterns of COBRA, suggesting that COBRAs function in maintaining anisotropic expansion may be microtubule-dependent.     

Cell expansion in the epidermis: microtubules, cellulose orientation and wall loosening enzymes

Two models of isolated epidermis were used to demonstrate that the net orientation of cellulose microfibrils in the cell wall is related to mechanical properties of the tissue, and can be used as an indicator for wall anisotropy. In the developing plant epidermis, cells expand in one or two directions in the plane of the plant surface. In epidermis cells actively expanding in one direction (elongation), the orientation of cortical microtubules closely matches the net cellulose orientation. In epidermis cells expanding in two directions, the orientation of the parallel microtubules does not coincide with the net cellulose orientation in the adjacent cell wall. The orientation of cortical microtubules is thus not always a reliable indicator of wall characteristics. In both types of epidermis, a high rate of expansion correlates with a high activity of xyloglucan endotransglycosylase (XET), as determinedin situ. This high activity alone cannot explain unidirectional wall expansion.     

Fine structural observations on the epidermis

Summary The organization of the wall of epidermal cells in the petiole of species of Apium, Eryngium, Rumex, and Abutilon as well as that of the epidermis of Avena coleoptile has been investigated. The outer and inner tangential walls consist of layers in which the cellulose microfibrils are oriented alternately parallel or transverse to the longitudinal cell axis. This organization resembles that previously described for collenchyma cell walls (Wardrop, 1969; Chafe, 1970). On the radial (anticlinal) walls the orientation of the microfibrils is transverse and these appear continuous with the layers of transverse orientation of the outer and inner tangential walls. Variation in thickness of the outer tangential, and radial, and inner tangential walls appears to result from the variation in thickness of those layers in which the microfibrils have a longitudinal orientation. The extent to which these observations can interpreted in terms of some type of modified multi-net growth is discussed.     

Real-Time Imaging of Cellulose Reorientation during Cell Wall Expansion in Arabidopsis Roots

Cellulose forms the major load-bearing network of the plant cell wall, which simultaneously protects the cell and directs its growth. Although the process of cellulose synthesis has been observed, little is known about the behavior of cellulose in the wall after synthesis. Using Pontamine Fast Scarlet 4B, a dye that fluoresces preferentially in the presence of cellulose and has excitation and emission wavelengths suitable for confocal microscopy, we imaged the architecture and dynamics of cellulose in the cell walls of expanding root cells. We found that cellulose exists in Arabidopsis (Arabidopsis thaliana) cell walls in large fibrillar bundles that vary in orientation. During anisotropic wall expansion in wild-type plants, we observed that these cellulose bundles rotate in a transverse to longitudinal direction. We also found that cellulose organization is significantly altered in mutants lacking either a cellulose synthase subunit or two xyloglucan xylosyltransferase isoforms. Our results support a model in which cellulose is deposited transversely to accommodate longitudinal cell expansion and reoriented during expansion to generate a cell wall that is fortified against strain from any direction.The walls of growing plant cells must fulfill two simultaneous and seemingly contradictory requirements. First, they must expand to accommodate cell growth, which is anisotropic in many tissues and determines organ morphology. Second, they must maintain their structural integrity, both to constrain the turgor pressure that drives cell growth and to provide structural rigidity to the plant. These requirements are met by constructing primary cell walls that can expand along with growing cells, whereas secondary cell walls are deposited after cell growth has ceased and serve the latter function.One of the major constituents of both types of cell walls is cellulose, which exists as microfibrils composed of parallel β-1,4-linked glucan chains that are held together laterally by hydrogen bonds (Somerville, 2006). Microfibrils are 2 to 5 nm in diameter, can extend to several micrometers in length, and exhibit high tensile strength that allows cell walls to withstand turgor pressures of up to 1 MPa (Franks, 2003). In vascular plants, cellulose is synthesized by a multimeric cellulose synthase (CESA) complex composed of at least three types of glycosyl transferases arranged into a hexameric rosette (Somerville, 2006). After delivery to the plasma membrane, CESA initially moves in alignment with cortical microtubules (Paredez et al., 2006), but its trajectory can be maintained independently of microtubule orientation. For example, in older epidermal cells of the root elongation zone in Arabidopsis (Arabidopsis thaliana), cellulose microfibrils at the inner wall face are oriented transversely despite the fact that microtubules reorient from transverse to longitudinal along the elongation zone (Sugimoto et al., 2000), suggesting that microtubule orientation and cellulose deposition are independent in at least some cases.Depending on species, cell type, and developmental stage, cellulose microfibrils may be surrounded by additional networks of polymers, including hemicelluloses, pectins, lignin, and arabinogalactan proteins (Somerville et al., 2004). Hemicelluloses are composed of β-1,4-linked carbohydrate backbones with side branches and include xyloglucans, mannans, and arabinoxylans. Xyloglucan is thought to interact with the surface of cellulose and form cross-links between adjacent microfibrils (Vissenberg et al., 2005). In some cell types, pectin or lignin may also participate in cross-linking or entrapment of other cell wall polymers. It is unclear how the associations between networks of different cell wall components are relaxed to allow for cell wall expansion during growth.Several models have been proposed for the behavior of cell wall components during wall expansion. The passive reorientation hypothesis (also called the multinet growth hypothesis; Preston, 1982) postulates that in longitudinally expanding cells, cellulose microfibrils are synthesized in a transverse pattern and are then reoriented toward the longitudinal axis due to the strain generated by turgor pressure (Green, 1960). This phenomenon has been observed in the multicellular alga Nitella (Taiz, 1984). In higher plants, there is less direct evidence for passive reorientation, and another hypothesis holds that wall expansion involves active, local, and controlled remodeling of cellulose microfibrils along a diversity of orientations (Baskin, 2005). Such remodeling could be achieved by proteins such as xyloglucan endotransglycosylases (XETs), which break and rejoin xyloglucan chains, and expansins, which loosen cell walls in vitro in a pH-dependent manner (Cosgrove, 2005). Marga et al. measured cellulose microfibril orientation at the innermost layer of the cell wall before and after in vitro extension and did not observe reorientation (Marga et al., 2005). This suggests that processes other than microfibril reorientation might be involved in wall expansion, at least under certain circumstances or in some wall layers. Thus, the degree to which cellulose microfibrils are reoriented after their synthesis during wall expansion has remained unclear.One difficulty in resolving this problem has been the inability to directly image cellulose microfibrils in the growing cell wall. Existing methods to assess cellulose structure and orientation in plant cell walls are limited by the low contrast of cellulose in transmission electron microscopy, the ability to image only the surface of the wall using field emission scanning electron microscopy, and the use of polarized light microscopy in combination with dyes such as Congo red to measure only the bulk orientation of cellulose microfibrils (Baskin et al., 1999; Sugimoto et al., 2000; Verbelen and Kerstens, 2000; MacKinnon et al., 2006). In addition, the sample manipulation required for the former two methods has the potential to introduce artifacts (Marga et al., 2005). Although cellulose microfibril orientation differs at the inner and outer surfaces of the cell wall (Sugimoto et al., 2000) and presumably changes over time, the dynamics of cellulose reorientation during cell wall expansion have not been observed to date.In this study, we tested fluorescent dyes for their potential to allow imaging of cellulose distribution in the walls of Arabidopsis seedlings by confocal microscopy. We used one of these dyes to characterize the distribution of cellulose in wild-type root cells and in mutants with reduced cellulose or xyloglucan. By directly observing the fine structure of cellulose over time in growing wild-type root cells, we concluded that cellulose microfibrils in these cells reorient in a transverse to longitudinal direction as predicted by the passive reorientation hypothesis.     

Temporal and spatial changes of cellulose synthesis inClosterium acerosum (Schrank) Ehrenberg during cell growth

The amount and distribution of wall microfibril synthesis were investigated in the cell-division cycle ofClosterium acerosum. Electron-microscopic examination and a methylation analysis of alkali-extracted wall fragments showed that alkali-extracted wall was mainly composed of microfibrils and that the microfibrils ofC. acerosum were 4-linked glucans, i.e., cellulose. Cellulose synthesis was measured as incorporation of¹⁴C, fed to cells as NaHCO₃, into extracted wall fragments. Extensive cellulose synthesis was coincident with septum formation, continued for more than 6 h and then ceased. It was found by microautoradiography that cellulose synthesis after cell division was essentially restricted to the expanding new semicells. Such a restricted distribution of cellulose synthesis was maintained for more than 6 h after septum formation, i.e., for more than 2 h after the cessation of expansion; afterwards, cellulose synthesis in some, but not all, cells became extended to the old semicells, and then ceased. Considerable cellulose synthesis also took place in the band-like expanding part of non-divided cells, indicating that cell division was not necessarily required for the induction of cellulose synthesis and the latter was coupled with cell expansion. Extension of cellulose synthesis to old semicells was brought about in divided cells by treatment with 3 mM colchicine, 28 M vinblastine, 50 M isopropyl-N-phenylcarbamate or 1 M isopropyl-N(3-chlorophenyl)carbamate, indicating that microtubules are involved in the limitation of cellulose synthesis to the new semicells.Abbreviations CIPC isopropyl-N(3-chlorophenyl)carbamate - DPO 2,5-diphenyloxazole - IPC isopropyl-N-phenylcarbamate     

Microfibrillar Structure, Cortical Microtubule Arrangement and the Effect of Amiprophos-methyl on Microfibril Orientation in the Thallus Cells of the Filamentous Green Alga, Chamaedoris orientalis

Microfibrillar structure, cortical microtubule orientation andthe effect of amiprophos-methyl (APM) on the arrangement ofthe most recently deposited cellulose microfibrils were investigatedin the marine filamentous green alga, Chamaedoris orientalis.The thallus cells of Chamaedoris showed typical tip growth.The orientation of microfibrils in the thick cell wall showedorderly change in longitudinal, transverse and oblique directionsin a polar dependent manner. Microtubules run parallel to thelongitudinally arranged microfibrils in the innermost layerof the wall but they are never parallel to either transverseor obliquely arranged microfibrils. The ordered change in microfibrilorientation is altered by the disruption of the microtubuleswith APM. The walls, deposited in the absence of the microtubules,showed typical helicoidal pattern. However, the original crossedpolylamellate pattern was restored by the removal of APM. Thissuggests that cortical microtubules in this alga do not controlthe direction of microfibril orientation but control the orderedchange of microfibril orientation. Amiprophos-methyl, Chamaedoris orientalis, coenocytic green alga, cortical microtubule, microfibrillar structure, tip growth     

Microtubules and angiosperm bordered pit formation

Summary Microtubules have been shown to run around the perimeter of the pit aperture of developing bordered pits of Salix fragilis, L. These microtubules are parallel to the microfibrils being produced and do not converge with them. Although microtubules may be parallel to microfibrils in differentiating vessel elements as well as in fibres, many cases have been found where microtubules are not so orientated. There is no direct evidence for the involvement of microtubules in the orientation of microfibrils in the secondary wall, although their position during wall synthesis suggests some ancillary role.     

Structure,function, and development of the peristome of the moss,Rhacopilum tomentosum,with special reference to the problem of microfibril orientation by microtubules

Summary The movement of the outer peristome teeth of the sporangium of the moss,Rhacopilum tomentosum, is driven by different swelling velocities of the outer (plates) and inner (ridges) wall thickenings due to suberin-like substances and wax-lamellae which enclose the ridges. The plates do not contain suberin-like material. The hydrophobic materials are secreted with the participation of smooth tubular ER.—When the local wall thickenings of the peristome teeth are formed, microtubules are concentrated along the plasmalemma in the thickening regions. They run along the crest of the developing plates (i.e., normal to the long axis of the tooth) and parallel to the long axis in the ridge cells. The wall thickenings are composed of layers of parallel microfibrils and of matrix substances. With a few exceptions microtubules and microfibrils have different directions. Golgi vesicles, subsurface ER and coated regions in the plasmalemma also are involved in cell wall formation. The function of the microtubules is discussed.     

Ultrastructural aspects of cell wall synthesis inSpirogyra

Summary Filaments ofSpirogyra were fixed in 2% osmium tetroxide dehydrated in alcohol and embedded in Araldite. The fine structure of cells with regard to wall synthesis was studied. The cell wall was shown to have four layers. The inner one contains microfibrils and is considered to be the cell wall proper. The outer three layers are components of the slime layer. The innermost of these, the second layer of the wall, was shown to be between 1m to 3m and the third 0.3m to 1m. The fourth layer appears as no more than a dark black line measuring 10 nm across. In the cytoplasm two types of vesicles were seen. The largest of these has contents similar in appearance to the slime layer of the wall. This same material was also seen in the large vesicles attached to the Golgi bodies. It is suggested that the smaller vesicles are derived from the larger vesicles and later fuse with the cell membrane. The Golgi bodies were found to be fairly large measuring up to 5m across. Small electron opaque blobs and flecks on the outside of the plasmalemma and in between the microfibrils of the cell wall proper are considered to be mucilage droplets travelling to the slime layer. It cannot be excluded that some of the material of the large vesicles is released directly into the cytoplasm and is transferred without vesicles through the plasma membrane. The negative contrast appearance of the microfibrils seen in the cell wall is thought to be due to the spaces between them being filled with this electron opaque mucilage.Intercisternal rodlets measuring 2.5 nm across were seen in the Golgi bodies.Transverse microtubules were found to occur near the plasmalemma having the same orientation as some of the microfibrils.Lomasome-like structures sometimes with many 5 nm fibrils in their vicinity were seen.     

The assembly of cellulose microfibrils in Valonia macrophysa Kütz

The assembly of cellulose microfibrils was investigated in artificially induced protoplasts of the alga, Valonia macrophysa (Siphonocladales). Primary-wall microfibrills, formed within 72 h of protoplast induction, are randomly oriented. Secondary-wall lamellae, which are produced within 96 h after protoplast induction, have more than three orientations of highly ordered microfibrils. The innermost, recently deposited micofibrils are not parallel with the cortical microtubules, thus indicating a more indirect role of microtubules in the orientation of microfibrils. Fine filamentous structures with a periodicity of 5.0–5.5 nm and the dimensions of actin were observed adjacent to the plasma membrane. Linear cellulose-terminal synthesizing complexes (TCs) consisting of three rows, each with 30–40 particles, were observed not only on the E fracture (EF) but also on P fracture (PF) faces of the plasma membrane. The TC appears to span both faces of the bimolecular leaflet. The average length of the TC is 350 nm, and the number of TCs per unit area during primary-wall synthesis is 1 per m². Neither paired TCs nor granule bands characteristic of Oocystis were observed. Changes in TC structure and distribution during the conversion from primary- to secondary-wall formation have been described. Cellulose microfibril assembly in Valonia is discussed in relation to the process among other eukaryotic systems.Abbreviations TC terminal complex - EF E (outer leaflet) fracture face of the plasma membrane - PF P (inner leaflet) fracture face of the plasma membrane - MT microtubule - PS protoplasmic surface of the membrane     

Orientation of microfibrils and microtubules in developing tension-wood fibres of Japanese ash (Fraxinus mandshurica var. japonica)

The orientation of cellulose microfibrils (MFs) and the arrangement of cortical microtubules (MTs) in the developing tension-wood fibres of Japanese ash (Fraxinus mandshurica Rupr. var. japonica Maxim.) trees were investigated by electron and immunofluorescence microscopy. The MFs were deposited at an angle of about 45° to the longitudinal axis of the fibre in an S-helical orientation at the initiation of secondary wall thickening. The MFs changed their orientation progressively, with clockwise rotation (viewed from the lumen side), from the S-helix until they were oriented approximately parallel to the fibre axis. This configuration can be considered as a semihelicoidal pattern. With arresting of rotation, a thick gelatinous (G-) layer was developed as a result of the repeated deposition of parallel MFs with a consistent texture. Two types of gelatinous fibre were identified on the basis of the orientation of MFs at the later stage of G-layer deposition. Microfibrils of type 1 were oriented parallel to the fibre axis; MFs of type 2 were laid down with counterclockwise rotation. The counterclockwise rotation of MFs was associated with a variation in the angle of MFs with respect to the fibre axis that ranged from 5° to 25° with a Z-helical orientation among the fibres. The MFs showed a high degree of parallelism at all stages of deposition during G-layer formation. No MFs with an S-helical orientation were observed in the G-layer. Based on these results, a model for the orientation and deposition of MFs in the secondary wall of tension-wood fibres with an S₁ + G type of wall organization is proposed. The MT arrays changed progressively, with clockwise rotation (viewed from the lumen side), from an angle of about 35–40° in a Z-helical orientation to an angle of approximately 0° (parallel) to the fibre axis during G-layer formation. The parallelism between MTs and MFs was evident. The density of MTs in the developing tension-wood fibres during formation of the G-layer was about 17–18 per m of wall. It appears that MTs with a high density play a significant role in regulating the orientation of nascent MFs in the secondary walls of wood fibres. It also appears that the high degree of parallelism among MFs is closely related to the parallelism of MTs that are present at a high density.Abbreviations FE-SEM field emission scanning electron microscopy - G gelatinous layer - MF cellulose microfibril - MT cortical microtubule - S₁ outermost layer of the secondary wall - TEM transmission electron microscopy We thank Dr. Y. Akibayashi, Mr. Y. Sano and Mr. T. Itoh of the Faculty of Agriculture, Hokkaido University, for their experimental or technical assistance.     

The Cellulose System in the Cell Wall ofMicrasterias

The cellulose system of the cell wall ofMicrasterias denticulataandMicrasterias rotatawas analyzed by diffraction contrast transmission electron microscopy, electron diffraction, and X-ray analysis. The studies, achieved on disencrusted cell ghosts, confirmed that the cellulose microfibrils occurred in crisscrossed bands consisting of a number of parallel ribbon-like microfibrils. The individual microfibrils had thicknesses of 5 nm for a width of around 20 nm, but in some instances, two or three microfibrils merged into one another to yield larger monocrystalline domains reaching up to 60 nm in lateral size. The orientation of the cellulose ofMicrasteriasis very unusual, as it was found that in the cell wall, the equatorial crystallographic planes of cellulose having ad-spacing of 0.60 nm [(110) in the Iβ cellulose unit cell defined by Sugiyamaet al.,1991,Macromolecules24, 4168–4175] were oriented perpendicular to the cell wall surface. Up to now, such orientation has been found only inSpirogyra,another member of the Zygnemataceae group. The unusual structure of the secondary wall cellulose ofMicrasteriasmay be tentatively correlated with the unique organization of the terminal complexes, which in this alga occur as hexagonal arrays of rosettes.     

Microtubules and epithem-cell morphogenesis in hydathodes of Pilea cadierei

When cell divisions have ceased, the epithem of the hydathodes of Pilea cadierei Gagnep. et Guill. consists of small polyhedral cells exhibiting a meristematic appearance, and completely lacks intercellular spaces. The cortical microtubules in epithem cells exhibit a unique organization: they are not scattered along the whole wall surface but form groups lying at some distance from each other. In sections, from two to eight groups of microtubules can be observed, each lining a wall region averaging between 0.5 and 1.5 m in length. These groups represent sections of microtubule bundles girdling a major part or the whole of the cell periphery. They are connected to one another by anastomoses, forming a microtubular reticulum. The assembly of microtubule bundles is followed by the appearance of distinct local thickenings in the adjacent wall areas. The cellulose microfibrils in the thickenings are deposited in parallel to the underlying microtubules. Gradually, the vacuolating epithem cells undergo swelling, except for the areas bounded by the wall thickenings. Since the latter, and actually their constituent bundles of cellulose microfibrils, cannot extend in length the differential cell growth results in schizogenous formation of intercellular spaces between contiguous cell walls at their thickened regions. The spaces then broaden and merge to become an extensive intercellular space system. As a result of the above processes, the epithem cells become constricted and finally deeply lobed. The observations show that (i) the cortical microtubules are intimately involved in the morphogenesis of the epithem cells and (ii) the initiation and development of the epithem intercellular spaces is a phenomenon directly related to cell morphogenesis and therefore to the cortical microtubule cytoskeleton. The sites of initiation of these spaces are highly predictable.     

Cellulose microfibril alignment recovers from DCB-induced disruption despite microtubule disorganization

Cellulose microfibril deposition patterns define the direction of plant cell expansion. To better understand how microfibril alignment is controlled, we examined microfibril orientation during cortical microtubule disruption using the temperature-sensitive mutant of Arabidopsis thaliana, mor1-1. In a previous study, it was shown that at restrictive temperature for mor1-1, cortical microtubules lose transverse orientation and cells lose growth anisotropy without any change in the parallel arrangement of cellulose microfibrils. In this study, we investigated whether a pre-existing template of well-ordered microfibrils or the presence of well-organized cortical microtubules was essential for the cell to resume deposition of parallel microfibrils. We first transiently disrupted the parallel order of microfibrils in mor1-1 using a brief treatment with the cellulose synthesis inhibitor 2,6-dichlorobenzonitrile (DCB). We then analysed the alignment of recently deposited cellulose microfibrils (by field emission scanning electron microscopy) as cellulose synthesis recovered and microtubules remained disrupted at the mor1-1 mutant's non-permissive culture temperature. Despite the disordered cortical microtubules and an initially randomized wall texture, new cellulose microfibrils were deposited with parallel, transverse orientation. These results show that transverse cellulose microfibril deposition requires neither accurately transverse cortical microtubules nor a pre-existing template of well-ordered microfibrils. We also demonstrated that DCB treatments reduced the ability of cortical microtubules to form transverse arrays, supporting a role for cellulose microfibrils in influencing cortical microtubule organization.     

Reorganization of cortical microtubules and cellulose deposition during leaf formation in Graptopetalum paraguayense

In the regeneration of a shoot from a leaf of the succulent, Graptopetalum paraguayense E. Walther the first new organs are leaf primordia. The original arrangement of cellulose microfibrils and of microtubules (MTs) in the epidermis of the leaf-forming site is one of parallel, straight lines. In the new primordium both structures still have a congruent arrangement but it is roughly in the form of concentric circles that surround the new cylindrical organ. The regions which undergo the greatest shift in orientation (90°) were studied in detail. Departures from the original cellulose alignment are detected in changes in the polarized-light image. Departures from the original cortical MT arrangement are detected using electron microscopy. The over-all reorganization of the MT pattern is followed by the tally of MT profiles, the various regions being studied in two perpendicular planes of section. This corrects for the difference in efficiency in counting transverse versus longitudinal profiles of MTs. Reorientation takes place sporadically, cell by cell, for both the cellulose microfibrils and the MTs, indicating a coordinated reorientation of the two structures. That MTs and cellulose microfibrils reorient jointly in individual cells was shown by reconstruction of the arrays of cortical MTs in paradermal sections of individual cells whose recent change in the orientation of cellulose deposition had been detected with polarized light. Closeness of the two alignments was also indicated by images where the MT and microfibril alignments co-varied within a single cell. The change-over in alignment of the MTs appears to involve stages where arrays of contrasting orientation co-exist to give a criss-cross image. During this critical reorganization, the frequency of the MTs is high. It falls during subsequent enlargement of the organ. It was found that the rearrangement of the cortical MTs to approximate a series of concentric circles on the residual meristem occurred before the emergence of leaf primordia. Through their apparent influence on microfibril alignments, the changes in MT disposition, described here, have the potential to generate major biophysical changes that accompany organogenesis.Abbreviation MT(s) microtubule(s)     

The role of microtubules in vessel member differentiation inColeus

Summary The role of microtubules in tracheary element formation in cultured stem segments ofColeus has been investigated through the use of the antimicrotubule drug, colchicine. Colchicine treatment of the cultured stem segments produced a dual effect on xylem differentiation. If applied at the time of stem segment isolation or shortly thereafter, wound vessel member formation is almost completely blocked. However, if colchicine is applied after the third day of culture, it does not inhibit differentiation, but instead large numbers of xylem elements are formed which have highly deformed secondary walls. Both effects are related to colchicine's specific affinity for microtubules. In the first case it is shown that colchicine blocks mitosis, presumably by destroying the spindle apparatus, and thus inhibits divisions which are prerequisite for the initiation of xylem differentiation. While, if colchicine is applied after the necessary preparative divisions have taken place, it destroys specifically the cortical microtubules associated with the developing bands of secondary wall, thus causing aberrant wall deposition.Light and electron microscopic analysis of drug-treated cells reveals that the secondary wall becomes smeared over the surface of the primary wall and does not retain the discrete banded pattern characteristic of secondary thickenings in untreated cells. Examination of colchicine-treated secondary walls in KMnO₄ fixed material shows that in the absence of microtubules the cellulose microfibrils lose their normal parallel orientation and are deposited in swirls and curved configurations, and often lie at sharp angles to the axis of the secondary wall band. Microtubules, thus, appear to play a major role in defining the pattern of secondary wall deposition and in directing the orientation of the cellulose microfibrils of the wall. Factors in addition to microtubules also act in controlling the secondary wall pattern, since we observe that even in the absence of microtubules secondary thickenings of two adjacent xylem elements are deposited directly opposite one another across the common primary wall.     

The orientation of cell wall microtubules in wheat coleoptile segments subjected to phytohormone treatment

The effect of plant hormones was studied on the growth of excised coleoptile segments of wheat plantlets grown under daylight conditions. In addition to the change in growth, that in the orientation of microtubules and cellulose microfibrils was investigated in parenchyma cells. Following a 6-h treatment gibberellin, and still more kinetin, stímulated the thickening of segments, which became evident also in an altered orientation of microtubules. Whereas in the control the microtubules and wall microfibrils were oriented randomly, following gibberellin treatment they were all parallel and formed an acute angle with the longitudinal cell axis. A still more pronounced difference resulted after kinetin treatment, when microtubules were localized parallel with the longitudinal cell axis. Auxin had the opposite effect: it stimulated the elongation of the segments, which became evident in a transverse orientation of both wall microtubules and microfibrils.     

Cell wall biogenesis in Oocystis: experimental alteration of microfibril assembly and orientation.

Cell wall biogenesis in the unicellular green alga Oocystis apiculata has been studied. Under normal growth conditions, a cell wall with ordered microfibrils is synthesized. In each layer there are rows of parallel microfibrils. Layers are nearly perpendicular to each other. Terminal linear synthesizing complexes are located in the plasma membrane, and they are capable of bidirectional synthesis of cellulose microfibrils. Granule bands associated with the inner leaflet of the plasma membrane appear to control the orientation of newly synthesized microfibrils. Subcortical microtubules also are present during wall synthesis. Patterns of cell wall synthesis were studied after treatment with EDTA and EGTA as well as divalent cations (MgSO4, CaSO4, Cacl2). 0.1 M EDTA treatment for 15 min results in the disassociation of the terminal complexes from the ends of microfibrils. EDTA-treated cells followed by 15 min treatment with MgSO4 results in reaggregation of the linear complexes into a paired state, remote from the original ends to which they were associated. After 90 min treatment with MgSO4, normal synthesis resumes. EGTA and calcium salts do not affect the linear complexes or microfibril orientation. Treatments with colchicine and vinblastine sulphate do not depolymerize the microtubles, but the wall microfibril orientation is altered. With colchicine or vinblastine, the change in orientation from layer to layer is inhibited. The process is reversible upon removal of the drugs. Lumicolchicine has no effect upon microfibril orientation, but granule bands are disorganized. Treatment with coumarin, a known inhibitor of cellulose synthesis, causes the loss of visualization of subunits of the terminal complexes. The possibility of the existence of a membrane-associated colchicine-sensitive orientation protein for cellulose microfibrils is discussed. Transmembrane modulation of microfibril synthesis and orientation is presented.