Efflux of ions and ATP depletion induced by pediocin PA-1 are concomitant with cell death in Listeria monocytogenes Scott A

Domination of Carnobacterium divergens LV13 by a bacteriocin-producing (bac⁺) organism Carnobacterium piscicola LV17 was dependent on the level of inoculum of the producer strain and its bacteriocin production. When C. piscicola LV17 was grown in APT broth from an initial inoculum of α-10⁴ cfu ml^-1, bacteriocin was not produced (bac^-) although maximum population was reached. The culture remained bac^- during subsequent inoculation at 10²-10⁷ cfu ml^-1 unless it was first grown on solid medium or if heat-treated supernatant fluids from a bac⁺ culture of C. piscicola LV17, LV17A or LV17B were added to the culture prior to the stationary phase of growth. Use of purified carnobacteriocins from C. piscicola LV17A and LV17B confirmed their role in regulation of the bac⁺ phenotype. The need for induction might account in part for differences in bacteriocin production by cultures in liquid and on solid growth media.     

The contribution of bacteriocin to inhibition of Listeria monocytogenes by Carnobacterium piscicola strains in cold-smoked salmon systems

AIMS: To study the importance of bacteriocin production for the antilisterial effect of a bacteriocinogenic Carnobacterium piscicola strain A9b on growth of Listeria monocytogenes in broth and cold-smoked salmon systems. METHODS AND RESULTS: Acriflavin treatment of strain A9b resulted in loss of bacteriocin production and of immunity to carnobacteriocin B2. Two plasmids present in the wild-type were lost in the variant that was also more sensitive to bavaricin and leucocin A than the wild-type indicating cross-resistance to class IIa bacteriocins. The growth rate of the bac- mutant was higher than that of the wild-type at 5 and 37 degrees C but not at 25 or 30 degrees C. In salmon juice the maximum cell density of L. monocytogenes was suppressed 3 and 6 log by co-culture with C. piscicola A9b bac- and bac+, respectively, as compared with the control. Sterile filtered cultures of C. piscicola A9b bac- caused a limited suppression of the maximum cell density of L. monocytogenes similar to that observed when sterile buffer was added in equal amounts. Semi-purified carnobacteriocin B2 caused a 3.5 log decline in viable cell count after 6 day of incubation in cold-smoked salmon juice at 5 degrees C. High resistance level to carnobacteriocin B2 was observed for L. monocytogenes cells exposed to semi-purified and in situ produced carnobacteriocin B2. CONCLUSIONS: The presence of bacteriocin production in C. piscicola enhances its inhibition of L. monocytogenes. SIGNIFICANCE AND IMPACT OF THE STUDY: Due to the emergence of resistance, a bacteriocin negative lactic acid bacteria may be more suited for practical use as a bioprotective agent against L. monocytogenes in ready-to-eat foods.     

Influence of pH,temperature and culture media on the growth and bacteriocin production by vaginal Lactobacillus salivarius CRL 1328

AIMS: To study the influence of pH, temperature and culture medium on the growth and bacteriocin production by vaginal Lactobacillus salivarius subsp. salivarius CRL 1328. METHODS AND RESULTS: The study was performed using a complete factorial experimental design. Lactobacillus salivarius was cultivated in LAPTg and MRS broths, adjusted to specific initial pH, and at different temperatures of incubation. The growth, which was evaluated by the Gompertz model, was higher in MRS broth than in LAPTg broth. The initial pH of the culture medium and the temperature had a dramatic effect on the production of bacteriocin. The optimal conditions for bacteriocin production were different to those for optimal growth. The decrease in the pH of the culture medium was parallel to the growth; pH had similar final values in both the MRS and the LAPTg broths. CONCLUSIONS: The optimal growth conditions were recorded in MRS broth, with an initial pH of 6.5 and a temperature of 37 degrees C. The maximum bacteriocin activity was obtained in LAPTg after 6 h at 37 degrees C, and at an initial pH of 6.5 or 8.0. SIGNIFICANCE AND IMPACT OF THE STUDY: The application of a complete factorial design, and the evaluation of the growth parameters through the Gompertz model, enabled a rapid and simultaneous exploration of the influence of pH, temperature and growth medium on both growth and bacteriocin production by vaginal Lact. salivarius CRL 1328.     

Optimization of enterocin P production by batch fermentation of Enterococcus faecium P13 at constant pH

The influence of pH on growth, enterocin P production and glucose consumption by Enterococcus faecium P13 was studied during anaerobic batch fermentation in MRS broth at 32 degrees C in a fermentor. Growth and glucose consumption were maximal at pH 7.0. Enterocin P production displayed primary metabolite kinetics and was strongly dependent on pH. A maximum antimicrobial activity of 1,949 bacteriocin units (BU) ml(-1) was obtained at pH 6.0, which represented a four-fold increase compared with the antimicrobial activity obtained without pH regulation. The pH exerted a marked effect on the decrease in bacteriocin activity, with the decrease being maximal at pH 7.0. In this report, we propose models for the growth of E. faecium P13 as well as enterocin P production and inactivation. Enterocin P production decreased when potentially stress-inducing compounds (NaCl or ethanol) were included in the growth medium.     

Carnocin KZ213 produced by<Emphasis Type="Italic"> Carnobacterium piscicola</Emphasis> 213 is adsorbed onto cells during growth. Its biosynthesis is regulated by temperature,pH and medium composition

Carnocin KZ213 is an antilisterial bacteriocin produced by Carnobacterium piscicola 213. The effects of pH and temperature were studied during batch fermentation in MRS* medium (modified MRS without ammonium citrate or sodium acetate). The optimal pH for growth is between 6 and 7. The maximum bacteriocin productivity in the supernatant occurs at pH 7. Operating at controlled pH increases the volumetric activity of the free bacteriocin by 8- to 16-fold, compared with uncontrolled pH. No bacteriocin production is observed below pH 6.5. Temperature has a dramatic effect on carnocin KZ213 production. Growth is optimal at 25 °C and 30 °C, although no bacteriocin production is detected at 30 °C. Also, bacteriocin production is observed at 25 °C in MRS*, but not in complex APT broth, where growth is optimal. The presence of glucose as a carbon and/or energy source is important for carnocin KZ213 synthesis. Hence, bacteriocin synthesis is regulated by temperature, carbon source and medium composition. Quantification studies of bacteriocin adsorbed onto producer cells show that the majority of the carnocin KZ213 secreted is adsorbed onto the producer cells during growth. Only 15% of the total bacteriocin produced is detected in the cell-free supernatant at the end of growth.     

Role of acetate in production of an autoinducible class IIa bacteriocin in Carnobacterium piscicola A9b

Carnobacterium piscicola strain A9b isolated from cold smoked salmon inhibits growth of the food-borne pathogen Listeria monocytogenes partly due to the production of a proteinaceous compound (L. Nilsson, L. Gram, and H. H. Huss. J. Food Prot. 62:336-342, 1999). The purpose of the present study was to purify the compound and describe factors affecting its production, with particular emphasis on food-relevant factors. Amino acid sequencing showed that the compound is a class IIa bacteriocin with an N-terminal amino acid sequence identical to that of carnobacteriocin B2. The production of the bacteriocin was autoinducible, and the threshold level for induction was 9.6 x 10(-10) M. We also report, for the first time, that acetate acts as an induction factor, with a threshold concentration of 0.3 to 12 mM. Acetate could not act as an inducer during the late exponential phase of C. piscicola A9b. The induction of bacteriocin production showed a dose-dependent relationship at acetate concentrations of up to 10 to 20 mM (depending on the growth medium) and at a concentration of 1.9 x 10(-8) M for the bacteriocin itself; a saturation level of bacteriocin specific activity was reached at these concentrations of induction factors. The combined use of both inducers did not enhance the saturation level of bacteriocin production compared to that seen with the use of each inducer alone. Increasing NaCl and glucose concentrations negatively influenced the efficiency of acetate as an induction factor. Based on the results, carnobacteriocin B2 was used as an induction factor to manipulate the production of bacteriocin in cold smoked salmon juice and thus improve the ability to inhibit L. monocytogenes.     

Optimization of Bacteriocin Production by Batch Fermentation of Lactobacillus plantarum LPCO10

Optimization of bacteriocin production by Lactobacillus plantarum LPCO10 was explored by an integral statistical approach. In a prospective series of experiments, glucose and NaCl concentrations in the culture medium, inoculum size, aeration of the culture, and growth temperature were statistically combined using an experimental 2³_5-2 fractional factorial two-level design and tested for their influence on maximal bacteriocin production by L. plantarum LPCO10. After the values for the less-influential variables were fixed, NaCl concentration, inoculum size, and temperature were selected to study their optimal relationship for maximal bacteriocin production. This was achieved by a new experimental 3²_3-1 fractional factorial three-level design which was subsequently used to build response surfaces and analyzed for both linear and quadratic effects. Results obtained indicated that the best conditions for bacteriocin production were shown with temperatures ranging from 22 to 27°C, salt concentration from 2.3 to 2.5%, and L. plantarum LPCO10 inoculum size ranging from 10^7.3 to 10^7.4 CFU/ml, fixing the initial glucose concentration at 2%, with no aeration of the culture. Under these optimal conditions, about 3.2 × 10⁴ times more bacteriocin per liter of culture medium was obtained than that used to initially purify plantaricin S from L. plantarum LPCO10 to homogeneity. These results indicated the importance of this study in obtaining maximal production of bacteriocins from L. plantarum LPCO10 so that bacteriocins can be used as preservatives in canned foods.     

Plasmid-associated bacteriocin production by a strain of Carnobacterium piscicola from meat.

Carnobacterium piscicola LV17 isolated from vacuum-packed meat produces bacteriocin(s) that is active against closely related lactic acid bacteria, Enterococcus spp., and a strain of Listeria monocytogenes but not against gram-negative bacteria. The bacteriocin has a bactericidal mode of action, is heat resistant, and is stable over a wide range of pH but is inactivated by proteolytic enzymes. Sensitive and resistant cells were shown to adsorb the bacteriocin, but cell death depended on contact of the bacteriocin with the cell membrane. Bacteriocin production is detected early in the growth cycle of the organism in APT broth, but it is not produced in APT broth adjusted to pH 5.5. Bacteriocin production and resistance to the bacteriocin produced are associated with two plasmids of 40 and 49 megadaltons. The possibility that two bacteriocins are produced is indicated because the inhibitory substances of the mutant strains containing either the 40- or 49-megadalton plasmids have different antimicrobial spectra.     

Plasmid-associated bacteriocin production by a strain of Carnobacterium piscicola from meat

Carnobacterium piscicola LV17 isolated from vacuum-packed meat produces bacteriocin(s) that is active against closely related lactic acid bacteria, Enterococcus spp., and a strain of Listeria monocytogenes but not against gram-negative bacteria. The bacteriocin has a bactericidal mode of action, is heat resistant, and is stable over a wide range of pH but is inactivated by proteolytic enzymes. Sensitive and resistant cells were shown to adsorb the bacteriocin, but cell death depended on contact of the bacteriocin with the cell membrane. Bacteriocin production is detected early in the growth cycle of the organism in APT broth, but it is not produced in APT broth adjusted to pH 5.5. Bacteriocin production and resistance to the bacteriocin produced are associated with two plasmids of 40 and 49 megadaltons. The possibility that two bacteriocins are produced is indicated because the inhibitory substances of the mutant strains containing either the 40- or 49-megadalton plasmids have different antimicrobial spectra.     

Growth inhibition of Listeria monocytogenes by a nonbacteriocinogenic Carnobacterium piscicola

AIMS: This study elucidates the mechanisms by which a nonbacteriocinogenic Carnobacterium piscicola inhibits growth of Listeria monocytogenes. METHODS AND RESULTS: Listeria monocytogenes was exposed to live cultures of a bacteriocin-negative variant of C. piscicola A9b in co-culture, in a diffusion chamber system, and to a cell-free supernatant. Suppression of maximum cell density (0-3.5 log units) of L. monocytogenes was proportional to initial levels of C. pisciola (10(3)-10(7) CFU ml(-1)). Cell-to-cell contact was not required to cause inhibition. The cell-free C. piscicola supernatant caused a decrease in L. monocytogenes maximum cell density, which was abolished by glucose addition but not by amino acid, vitamin or mineral addition. The fermentate also gave rise to a longer lag phase and a reduction in growth rate. These effects were independent of glucose and may have been caused by acetate production by C. piscicola. 2D gel-electrophoretic patterns of L. monocytogenes exposed to C. piscicola or to L. monocytogenes fermentate did not differ. Treatment with C. piscicola fermentate resulted in down-regulation (twofold) of genes involved in purine- or pyrimidine metabolism, and up-regulation (twofold) of genes from the regulon for vitamin B12 biosynthesis and propanediol and ethanolamine utilization. CONCLUSIONS: A nonbacteriocinogenic C. piscicola reduced growth of L. monocytogenes partly by glucose depletion. SIGNIFICANCE AND IMPACT OF THE STUDY: Understanding the mechanism of microbial interaction enhances prediction of growth in mixed communities as well as use of bioprotective principles for food preservation.     

Optimization of bacteriocin production by batch fermentation of Lactobacillus plantarum LPCO10

Optimization of bacteriocin production by Lactobacillus plantarum LPCO10 was explored by an integral statistical approach. In a prospective series of experiments, glucose and NaCl concentrations in the culture medium, inoculum size, aeration of the culture, and growth temperature were statistically combined using an experimental 2(3)(5-2) fractional factorial two-level design and tested for their influence on maximal bacteriocin production by L. plantarum LPCO10. After the values for the less-influential variables were fixed, NaCl concentration, inoculum size, and temperature were selected to study their optimal relationship for maximal bacteriocin production. This was achieved by a new experimental 3(2)(3-1) fractional factorial three-level design which was subsequently used to build response surfaces and analyzed for both linear and quadratic effects. Results obtained indicated that the best conditions for bacteriocin production were shown with temperatures ranging from 22 to 27 degrees C, salt concentration from 2.3 to 2.5%, and L. plantarum LPCO10 inoculum size ranging from 10(7.3) to 10(7.4) CFU/ml, fixing the initial glucose concentration at 2%, with no aeration of the culture. Under these optimal conditions, about 3.2 x 10(4) times more bacteriocin per liter of culture medium was obtained than that used to initially purify plantaricin S from L. plantarum LPCO10 to homogeneity. These results indicated the importance of this study in obtaining maximal production of bacteriocins from L. plantarum LPCO10 so that bacteriocins can be used as preservatives in canned foods.     

Medium components effecting bacteriocin production by two strains of Lactobacillus plantarum ST414BZ and ST664BZ isolated from boza

Bacteriocins ST414BZ and ST664BZ, produced by Lactobacillus plantarum, inhibited the growth of a number of lactic acid bacteria, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae and Enterobacter cloacae. Optimal production of bacteriocin ST664BZ (12 800 AU/mL) was recorded in MRS broth with an initial pH of 6.0 and 6.5. Bacteriocin ST414BZ was produced in MRS broth at lower pH values, ranging from 6.5 to 5.0. Low levels of bacteriocin activity were produced in BHI, M17, 10% (w/v) soy flour and 10% (w/v) molasses, suggesting that specific nutrients are required for optimal production. Bacteriocin ST414BZ production doubled (from 12 800 to 25 600 AU/mL) in MRS broth with tryptone as sole nitrogen source, or when glucose was replaced with maltose. Bacteriocin ST664BZ production, on the other hand, was less influenced by changes in nitrogen content, but increased two-fold (to 25 600 AU/mL) when glucose was replaced with sucrose, maltose or mannose, or when MRS broth was supplemented with 2.0 g/L KH₂ PO₄. Enrichment of MRS broth with vitamins B₁₂, B₁ or C did not stimulate production of the two bacteriocins. Growth in the presence of DL-6,8-thioctic acid increased bacteriocin ST664BZ production to 25 600 AU/mL. Concluded from these results, optimal levels of bacteriocins ST414BZ and ST664BZ will be produced in boza enriched with tryptone and maltose.     

Induction and Propagation of a Bacillus subtilis L Form in Natural and Synthetic Media

The L form of Bacillus subtilis NRRL B-3275 was induced in a 7% NaCl broth medium and subsequently propagated in natural and synthetic media. The L form grew readily in tryptone broth supplemented with glucose, NaCl, and phosphate buffer, and in a synthetic medium containing only glucose and biotin, in addition to the required salts. Successive transfers from the bacillus inoculum and subsequent large bodies in the tryptone broth with 7% NaCl resulted in gradual selection or transition from the bacillary form to a stable L form without the addition of an antibiotic. The number of viable granules attained in the broth culture exceeded 9 x 10(7) per ml, and numerous large bodies were always present in rapidly growing cultures.     

Simple method to identify bacteriocin induction peptides and to auto-induce bacteriocin production at low cell density

The production of some bacteriocins by lactic acid bacteria is regulated by induction peptides (IPs) that are secreted by a dedicated secretion system. The IP gene cbaX, for carnobacteriocin A production by Carnobacterium piscicola LV17A, and a presumptive IP gene (orf6), associated with the genetic locus for enterocin B production in Enterococcus faecium BFE 900, were fused to the signal peptide of the bacteriocin divergicin A from Carnobacterium divergens LV13 to access the general secretory pathway. The culture supernatants of C. piscicola UAL26 and Lactococcus lactis MG1363 containing either of these constructs were used to induce bacteriocin production by Bac(-) cultures of C. piscicola LV17A or E. faecium CTC492. The cbaX fusion product induced bacteriocin production by Bac(-) C. piscicola LV17A, but the orf6 fusion product did not induce bacteriocin production by E. faecium CTC492. This represents a relatively simple method of confirming the role of presumptive IPs. The transformation of C. piscicola LV17A with the CbaX gene under expression of the P32 promoter from L. lactis resulted in constitutive production of bacteriocin by either the dedicated transport apparatus or the general secretory pathway.     

Modelling the growth and bacteriocin production by Lactobacillus amylovorus DCE 471 in batch cultivation

A model was set up to describe the production of amylovorin L471 by Lactobacillus amylovorus DCE 471, on a laboratory scale, in which the cells are grown in MRS (deMau-Rogosa-Sharpe) broth. The main features of the dynamic model are : (i) increase of the biomass according to a logistic equation ; (ii) non-growth-associated consumption of substrate (maintenance metabolism) ; and (iii) primary metabolite kinetics for the bacteriocin production. The main purpose was to set up a simple empirical model to examine growth and bacteriocin production in different conditions. Parameters estimated from a fermentation with 20 g l⁻¹ glucose (w/v) could be used to predict the evolution of cell dry mass, glucose and lactic acid concentration of fermentations, performed with 5, 30, 40 and 60 g l⁻¹ initial glucose. The influence of the operating temperature (30, 37 and 45 °C) on the model parameters was also investigated. The proposed model was able to describe growth and bacteriocin production in all cases. The specific bacteriocin production rate was found to vary strongly with temperature, with 30 °C as the best value. Variation of the operating temperature from 37 to 30 °C appeared to significantly enhance the specific bacteriocin production.     

Optimization of culture conditions and medium composition for the production of micrococcin GO5 by Micrococcus sp. GO5

To enhance the production of micrococcin GO5, a bacteriocin produced by Micrococcus sp. GO5, cultivation conditions and medium composition were optimized. The optimal initial pH and temperature for bacteriocin production were 7.0-9.0 and 37 degrees C, respectively. Micrococcus sp. GO5 displayed the highest micrococcin GO5 activity when grown in modified MRS medium that contained lactose or sucrose, rather than glucose, as a carbon source. The maximum bacteriocin activity was obtained in modified MRS medium containing 0.5% tryptone and 1.0% yeast extract as nitrogen sources instead of the other nitrogen sources present in MRS medium. Bacteriocin production was greatly affected by the concentration of K(2)HPO(4); strain GO5 produced eight-fold more bacteriocin in medium containing 2.0-2.5% K(2)HPO(4) than in medium containing 0.2% K(2)HPO(4). The optimal concentration of MgSO(4).7H(2)O for bacteriocin production was 0.5%. The production of micrococcin GO5 was increased 32-fold in shake flask culture and 16-fold in a bioreactor using the optimized medium (TY medium), compared with culturing in MRS medium.     

Enhancing the antimicrobial effects of bovine lactoferrin against Escherichia coli O157:H7 by cation chelation, NaCl and temperature

AIM: To evaluate the effect of NaCl, growth medium and temperature on the antimicrobial activity of bovine lactoferrin (LF) against Escherichia coli O157:H7 in the presence of different chelating agents. METHODS AND RESULTS: LF (32 mg ml(-1)) was tested against E. coli O157:H7 strain 3081 in Luria broth (LB) and All Purpose Tween (APT) broth with metal ion chelators sodium bicarbonate (SB), sodium lactate (SL), sodium hexametaphosphate (SHMP), ethylene diamine tetraacetic acid (EDTA) or quercetin at 0.5 and 2.5% NaCl at 10 and 37 degrees C. LF and the chelators were tested against four other E. coli O157:H7 strains in LB at 2.5% NaCl and 10 degrees C. LF alone was bacteriostatic against strains 3081 and LCDC 7283 but other strains grew. Antimicrobial effectiveness of LF was reduced in APT broth but enhanced by SB at 2.5% NaCl and 10 degrees C where 4.0 log(10) CFU ml(-1) inoculated cells were killed. EDTA enhanced antimicrobial action of the LF-SB combination. SL alone was effective against E. coli O157:H7 but a reduction in its activity at 2.5% NaCl and 10 degrees C was reversed by LF. The combinations LF-SHMP and LF-quercetin were more effective at 37 degrees C and NaCl effects varied. CONCLUSIONS: LF plus SB or SL were bactericidal toward the same 3/5 E. coli O157:H7 strains and inhibited growth of the others at 2.5% NaCl and 10 degrees C. SIGNIFICANCE AND IMPACT OF THE STUDY: The combination of LF with either SL or SB shows potential for reducing viability of E. coli O157:H7 in food systems containing NaCl at reduced, but growth permissive temperature.     

Characterization of a bacteriocin, Thermophilin 1277, produced by Streptococcus thermophilus SBT1277

AIMS: To assess the inhibitory activity and the influence of culture condition on the growth and bacteriocin, Thermophilin 1277, production by Streptococcus thermophilus SBT1277. METHODS AND RESULTS: Thermophilin 1277, which was produced by S. thermophilus SBT1277, showed an antimicrobial activity against several lactic acid bacteria and food spoilage bacteria including Clostridium butylicum, C. sprogenes and Bacillus cereus. Thermophilin 1277 was inactivated by proteinase K. Heating treatment did not affect the antimicrobial activity. The partially purified Thermophilin 1277 had an apparent molecular mass of 3.7 kDa. N-terminal sequence analysis revealed 15 amino acid residues that correspond with amino acid sequence of the lantibiotics bovicin HJ50 produced by Streptococcus bovis HJ50. The effects of culture condition for the bacteriocin production by S. thermophilus SBT1277 were studied. During the batch fermentation, Thermophilin 1277 was produced in M17 broth, but no bacteriocin production occurred in the sucrose-tryptone (ST) broth. Bacteriocin production was detected in pH controlled ST broth at pH values of 5.5-6.5. CONCLUSIONS: Thermophilin 1277 production from S. thermophilus strain depended on the culture conditions. Some characters and N-terminal amino acid sequence of Thermophilin 1277 differed from bacteriocins produced by S. thermophilus reported previously. SIGNIFICANCE AND IMPACT OF THE STUDY: Streptococcus thermophilus SBT1277 or its bacteriocin which has a wide inhibitory spectrum has a potential use as a biopreservative in dairy products.     

Influence of media and temperature on bacteriocin production by<Emphasis Type="Italic"> Bacillus cereus</Emphasis> 8A during batch cultivation

Cerein 8A is a bacteriocin produced by the soil bacterium Bacillus cereus 8A, isolated from native woodlands of Brazil. The influence of temperature and media on the growth of B. cereus 8A and the production of this bacteriocin was studied during batch cultivation. Maximum activity was detected by cultivation in brain/heart infusion broth, reaching 3200 activity units ml^–1. Bacteriocin was also produced in peptone, MRS, Mueller–Hinton and nutrient broth, while no activity was observed during cultivation in thioglycollate or tryptic soy broth. Temperature had a strong influence on bacteriocin production, which was higher at 30 °C than at 25 °C. An important decrease in bacteriocin activity was observed at 37 °C. The relationship between growth and specific production rates, as a function of the temperature, showed different kinetics of production and there were several peaks in the specific production rates during growth. Bacteriocin was produced at the stationary phase, indicating it is synthesized as a secondary metabolite.     

The influence of pH and growth rate on production of the bacteriocin, bavaricin MN, in batch and continuous fermentations

Bavaricin MN, a bacteriocin produced by Lactobacillus bavaricus MN, reached titres of 2000 AU ml^-1 in APT broth maintained at pH 6.0, 30°C in a batch fermenter. Levels of bavaricin MN at pH 5.5 and 6.5 were lower despite comparable levels of producer cells. The addition of 3.0 g l^-1 beef extract to APT broth resulted in increases in both the growth rate of the culture and the production of bavaracin MN. The titre of bavaricin MN in batch fermenters controlled at pH 6.0 in APT broth plus 3 g l^-1 beef extract reached 3200 AU ml^-1 at 30°C. This level was reduced to 800 AU ml^-1 by 76 h. Glucose-limited continuous culture of Lact. bavaricus MN under the same conditions resulted in an increase in the titre of bavaricin MN to 6400 AU ml^-1. This level was maintained, independent of growth rate, for 345 h. Growth rates of 0.205, 0.118, 0.169 and 0.058 h^-1 were examined.