1H, 13C, and 15N NMR assignments of the Pyrococcus abyssi DNA polymerase II intein

Protein splicing is a precise post-translational process mediated by inteins. Inteins are intervening proteins that cleave themselves from a precursor protein while joining the flanking sequences. Here we report the ¹⁵N, ¹³C, and ¹H chemical shift assignments of the intein from DNA polymerase II of Pyrococcus abyssi (Pab PolII intein), which has been recombinantly overexpressed and isotopically labeled. The NMR assignments of Pab PolII intein are essential for solution structure determination and protein dynamics study.     

Probing intein-catalyzed thioester formation by unnatural amino acid substitutions in the active site

Inteins are single-turnover catalysts that splice themselves out of a precursor polypeptide chain. For most inteins, the first step of protein splicing is the formation of a thioester through an N-S acyl shift at the upstream splice junction. However, the mechanism by which this reaction is achieved and the impact of mutations in and close to the active site remain unclear on the atomic level. To investigate these questions, we have further explored a split variant of the Ssp DnaB intein by introducing substitutions with unnatural amino acids within the short synthetic N-terminal fragment. A previously reported collapse of the oxythiazolidine anion intermediate into a thiazoline ring was found to be specificially dependent on the methyl side chain of the flanking Ala(-1). The stereoisomer d-Ala and the constitutional isomers β-Ala and sarcosine did not lead to this side reaction but rather supported splicing. Substitution of the catalytic Cys1 with homocysteine strongly inhibited protein splicing; however, thioester formation was not impaired. These results argue against the requirement of a base to deprotonate the catalytic thiol group prior to the N-S acyl shift, because it should be misaligned for optimal proton abstraction. A previously described mutant intein evolved for more general splicing in different sequence contexts could even rather efficiently splice with this homocysteine. Our findings show the large impact of some subtle structural changes on the protein splicing pathway, but also the remarkable tolerance toward other changes. Such insights will also be important for the biotechnological exploitation of inteins.     

Mechanism of protein splicing of the Pyrococcus abyssi lon protease intein

Protein splicing is a post-translational process by which an intervening polypeptide, the intein, excises itself from the flanking polypeptides, the exteins, coupled to ligation of the exteins. The lon protease of Pyrococcus abyssi (Pab) is interrupted by an intein. When over-expressed as a fusion protein in Escherichia coli, the Pab lon protease intein can promote efficient protein splicing. Mutations that block individual steps of splicing generally do not lead to unproductive side reactions, suggesting that the intein tightly coordinates the splicing process. The intein can splice, although it has Lys in place of the highly conserved penultimate His, and mutants of the intein in the C-terminal region lead to the accumulation of stable branched-ester intermediate.     

An alternative protein splicing mechanism for inteins lacking an N-terminal nucleophile

Variations in the intein-mediated protein splicing mechanism are becoming more apparent as polymorphisms in conserved catalytic residues are identified. The conserved Ser or Cys at the intein N-terminus and the conserved intein penultimate His are absent in the KlbA family of inteins. These inteins were predicted to be inactive, since an N-terminal Ala cannot perform the initial reaction of the standard protein splicing pathway to yield the requisite N-terminal splice junction (thio)ester. Despite the presence of an N-terminal Ala and a penultimate Ser, the KlbA inteins splice efficiently using an alternative protein splicing mechanism. In this non-canonical pathway, the C-extein nucleophile attacks a peptide bond at the N-terminal splice junction rather than a (thio)ester bond, alleviating the need to form the initial (thio)ester at the N-terminal splice junction. The remainder of the two pathways is the same: branch resolution by Asn cyclization is followed by an acyl rearrangement to form a native peptide bond between the ligated exteins.     

Crystal structure of a mini-intein reveals a conserved catalytic module involved in side chain cyclization of asparagine during protein splicing

We have determined the crystal structure of a 154-residue intein derived from the dnaB gene of Synechocystis sp. strain PCC6803 and refined it to a 2.0-A resolution. The x-ray structure suggests that this intein possesses two catalytic sites that appear to be separately responsible for splicing and cleavage of the N- and C-terminal scissile bonds. The conserved intein block F residues are the important components of a catalytic site for side chain cyclization of the last intein residue, Asn-154. The data suggest that the imidazole ring of His-143 is involved in the activation of the side chain Ndelta atom of Asn-154, leading to a nucleophilic attack on the carbonyl carbon of Asn-154. Substitution of His-143 with Ala or Gln resulted in the inhibition of C-terminal cleavage. His-153, Asp-136, and a water molecule appear to constitute an oxyanion binding site by contacting the carbonyl oxygen of Asn-154 to stabilize the transition state. The structure and mutagenesis data also support that the close contact between the hydroxyl groups of Thr-138 and Ser-155, whose side chain participates in an S --> O acyl shift, plays an important role in the nucleophile orientation. Our structural modeling suggests that this catalytic module is conserved in the C-terminal subdomains of inteins from diverse organisms.     

Evaluation and comparison of protein splicing by exogenous inteins with foreign exteins in Escherichia coli

Protein splicing catalyzed by inteins has enabled various biotechnological applications such as protein ligation. Successful applications of inteins are often limited by splicing efficiency. Here, we report the comparison of protein splicing between 20 different inteins from various organisms in identical contexts to identify robust inteins with foreign exteins. We found that RadA intein from Pyrococcus horikoshii and an engineered DnaB intein from Nostoc punctiforme demonstrated an equally efficient splicing activity to the previously reported highly efficient DnaE intein from Nostoc punctiforme. The newly identified inteins with efficient cis-splicing activity can be good starting points for the further development of new protein engineering tools.     

Reactivity of the cysteine residues in the protein splicing active center of the Mycobacterium tuberculosis RecA intein

Protein splicing involves the self-catalyzed excision of an intervening polypeptide segment, an intein, from a precursor protein. The first two steps in the protein splicing process lead to the formation of ester intermediates through nucleophilic attacks by the side chains of cysteine, serine, or threonine residues adjacent to the splice junctions. Since both nucleophilic residues in the Mycobacterium tuberculosis RecA intein are cysteine, their reactivities could be compared by sulfhydryl group titration. This was accomplished by using fusion proteins containing a truncated RecA intein modified by mutation to prevent protein splicing, in which the cysteines at the splice junctions were the only sulfhydryl groups. The ability to undergo hydroxylamine-induced cleavage at the upstream splice junction showed that the modified intein was not impaired in the ability to form ester intermediates. Sulfhydryl titration with iodoacetamide, monitored by quantitating the residual thiols after reaction with a maleimide derivative of biotin, revealed a striking difference in the apparent pK(a) values of the cysteines at the two splice junctions. The apparent pK(a) of the cysteine at the upstream splice junction, which initiates the N-S acyl rearrangement leading to the linear ester intermediate, was approximately 8.2, whereas that of the cysteine residue at the downstream splice junction, which initiates the transesterification reaction converting the linear ester to the branched ester intermediate, was about 5.8. This suggests that the transesterification step is facilitated by an unusually low pK(a) of the attacking thiol group. Comparison of the rates of cleavage of the linear ester intermediates derived from the M. tuberculosis RecA and the Saccharomyces cerevisiae VMA inteins by dithiothreitol and hydroxylamine revealed that the former reacted relatively more slowly with dithiothreitol, suggesting that the RecA intein has diverged in the course of evolution to react preferentially with thiolate anions and thus lacks the basic groups that may facilitate nucleophilic attack by thiols in other inteins.     

Zinc inhibition of protein trans-splicing and identification of regions essential for splicing and association of a split intein*

Two important aspects of protein splicing were investigated by employing the trans-splicing intein from the dnaE gene of Synechocystis sp. PCC6803. First, we demonstrated that both protein splicing and cleavage at the N-terminal splice junction were inhibited in the presence of zinc ion. The trans-splicing reaction was partially blocked at a concentration of 1-10 microm Zn(2+) and completely inhibited at 100 microm Zn(2+); the inhibition by zinc was reversed in the presence of ethylenediaminetetraacetic acid. We propose that inactivation of Cys(160) at the C-terminal splice junction by the chelation of zinc affects both the N-S acyl rearrangement and the transesterification steps in the splicing pathway. Furthermore, in vivo and in vitro assays were established for the determination of intein residues and regions required for splicing or association between the N- and C-terminal intein halves. N-terminal truncation of the intein C-terminal segment inhibited both splicing and association activities, suggesting this region is crucial for the formation of an interface between the two intein halves. The replacement of conserved residues in blocks B and F with alanine abolished splicing but allowed for association. This is the first evidence showing that the conserved residues in block F are required for protein splicing.     

NMR and crystal structures of the Pyrococcus horikoshii RadA intein guide a strategy for engineering a highly efficient and promiscuous intein

In protein splicing, an intervening protein sequence (intein) in the host protein excises itself out and ligates two split host protein sequences (exteins) to produce a mature host protein. Inteins require the involvement for the splicing of the first residue of the extein that follows the intein (which is Cys, Ser, or Thr). Other extein residues near the splicing junctions could modulate splicing efficiency even when they are not directly involved in catalysis. Mutual interdependence between this molecular parasite (intein) and its host protein (exteins) is not beneficial for intein spread but could be advantageous for intein survival during evolution. Elucidating extein-intein dependency has increasingly become important since inteins are recognized as useful biotechnological tools for protein ligation. We determined the structures of one of inteins with high splicing efficiency, the RadA intein from Pyrococcus horikoshii (PhoRadA). The solution NMR structure and the crystal structures elucidated the structural basis for its high efficiency and directed our efforts of engineering that led to rational design of a functional minimized RadA intein. The crystal structure of the minimized RadA intein also revealed the precise interactions between N-extein and the intein. We systematically analyzed the effects at the -1 position of N-extein and were able to significantly improve the splicing efficiency of a less robust splicing variant by eliminating the unfavorable extein-intein interactions observed in the structure. This work provides an example of how unveiling structure-function relationships of inteins offer a promising way of improving their properties as better tools for protein engineering.     

Protein splicing in the absence of an intein penultimate histidine

Protein splicing is a self-catalytic process in which an intervening sequence, termed an intein, is excised from a protein precursor, and the flanking polypeptides are religated. The conserved intein penultimate His facilitates this reaction by assisting in Asn cyclization, which results in C-terminal splice junction cleavage. However, many inteins do not have a penultimate His. Previous splicing studies with 2 such inteins yielded contradictory results. To resolve this issue, the splicing capacity of 2 more inteins without penultimate His residues was examined. Both the Methanococcus jannaschii phosphoenolpyruvate synthase and RNA polymerase subunit A' inteins spliced. Splicing of the phosphoenolpyruvate synthase intein improved when its penultimate Phe was changed to His, but splicing of the RNA polymerase subunit A' intein was inhibited when its penultimate Gly was changed to His. We propose that inteins lacking a penultimate His (i) arose by mutation from ancestors in which a penultimate His facilitated splicing, (ii) that loss of this His inhibited, but may not have blocked, splicing, and (iii) that selective pressure for efficient expression of the RNA polymerase yielded an intein that utilizes another residue to assist Asn cyclization, changing the intein active site so that a penultimate His now inhibits splicing.     

The Thermococcus kodakaraensis Tko CDC21-1 intein activates its N-terminal splice junction in the absence of a conserved histidine by a compensatory mechanism

Inteins and other self-catalytic enzymes, such as glycosylasparaginases and hedgehog precursors, initiate autocleavage by converting a peptide bond to a (thio)ester bond when Ser, Thr, or Cys undergoes an N-[S/O] acyl migration assisted by residues within the precursor. Previous studies have shown that a His at position 10 in intein Block B is essential for this initial acyl migration and N-terminal splice junction cleavage. This His is present in all inteins identified to date except the Thermococcus kodakaraensis Tko CDC21-1 intein orthologs and the inactive Arthrobacter species FB24 Arth_1007 intein. This study demonstrates that the Tko CDC21-1 intein is fully active and has replaced the lost catalytic function normally provided by the Block B His using a compensatory mechanism involving a conserved ortholog-specific basic residue (Lys(58)) present outside the standard intein conserved motifs. We propose that Lys(58) catalyzes the initial N-S acyl migration by stabilizing the thiazolidine-tetrahedral intermediate, allowing it to be resolved by water-mediated hydrolysis rather than by protonating the leaving group as His is theorized to do in many other inteins. Autoprocessing enzymes may have more flexibility in evolving catalytic variations because high reaction rates are not required when performing single-turnover reactions on "substrates" that are covalently attached to the enzyme. Consequently, inteins have more flexibility to sample catalytic mechanisms, providing insight into various strategies that enzymes use to accomplish catalysis.     

Expanding the definition of class 3 inteins and their proposed phage origin

Inteins are the protein equivalent of introns. Their protein splicing activity is essential for the host protein's maturation and function. Inteins are grouped into three classes based on sequence signature and splicing mechanism. The sequence signature of the recently characterized class 3 inteins is a noncontiguous Trp-Cys-Thr (WCT) motif and the absence of the standard class 1 Cys1 or Ser1 N-terminal nucleophile. The intein N-terminal Cys1 or Ser1 residue is essential for splicing in class 1 inteins. The mycobacteriophage Catera Gp206, Nocardioides sp. strain JS614 TOPRIM, and Thermobifida fusca YX Tfu2914 inteins have a mixture of class 1 and class 3 motifs. They carry the class 3 Trp-Cys-Thr motif and have the standard class 1 N-terminal Ser1 or Cys1. This study determined which class the mycobacteriophage Catera Gp206 and Nocardioides sp. JS614 TOPRIM inteins belong to based on catalytic mechanism. The mycobacteriophage Catera Gp206 intein (starting with Ser1) is a class 3 intein, and its Ser1 residue is not required for splicing. Based on phylogenetic analysis, we propose that class 3 inteins arose from a single mutated intein that was spread by phage into predominantly helicase genes in various phages and their hosts.     

Structural and Dynamical Features of Inteins and Implications on Protein Splicing

Protein splicing is a posttranslational modification where intervening proteins (inteins) cleave themselves from larger precursor proteins and ligate their flanking polypeptides (exteins) through a multistep chemical reaction. First thought to be an anomaly found in only a few organisms, protein splicing by inteins has since been observed in microorganisms from all domains of life. Despite this broad phylogenetic distribution, all inteins share common structural features such as a horseshoe-like pseudo two-fold symmetric fold, several canonical sequence motifs, and similar splicing mechanisms. Intriguingly, the splicing efficiencies and substrate specificity of different inteins vary considerably, reflecting subtle changes in the chemical mechanism of splicing, linked to their local structure and dynamics. As intein chemistry has widespread use in protein chemistry, understanding the structural and dynamical aspects of inteins is crucial for intein engineering and the improvement of intein-based technologies.     

Protein splicing and auto-cleavage of bacterial intein-like domains lacking a C'-flanking nucleophilic residue

Bacterial intein-like (BIL) domains are newly identified homologs of intein protein-splicing domains. The two known types of BIL domains together with inteins and hedgehog (Hog) auto-processing domains form the Hog/intein (HINT) superfamily. BIL domains are distinct from inteins and Hogs in sequence, phylogenetic distribution, and host protein type, but little is known about their biochemical activity. Here we experimentally study the auto-processing activity of four BIL domains. An A-type BIL domain from Clostridium thermocellum showed both protein-splicing and auto-cleavage activities. The splicing is notable, because this domain has a native Ala C'-flanking residue rather than a nucleophilic residue, which is absolutely necessary for intein protein splicing. B-type BIL domains from Rhodobacter sphaeroides and Rhodobacter capsulatus cleaved their N' or C' ends. We propose an alternative protein-splicing mechanism for the A-type BIL domains. After an initial N-S acyl shift, creating a thioester bond at the N' end of the domain, the C' end of the domain is cleaved by Asn cyclization. The resulting amino end of the C'-flank attacks the thioester bond next at the N' end of the domain. This aminolysis step splices the two flanks of the domain. The B-type BIL domain cleavage activity is explained in the context of the canonical intein protein-splicing mechanism. Our results suggest that the different HINT domains have related biochemical activities of proteolytic cleavages, ligation and splicing. Yet the predominant reactions diverged in each HINT type according to their specific biological roles. We suggest that the BIL domain cleavage and splicing reactions are mechanisms for post-translationally generating protein variability, particularly in extracellular bacterial proteins.     

Protein splicing

Protein splicing is a posttranslational process that results in excision of an internal protein region (intein) and ligation of its flanking sequences (exteins). As distinguished from other variants of protein processing, protein splicing does not require cofactors of enzymes. Protein splicing is catalyzed by an internal domain (so-called Hint domain) of the intein itself. The review considers the main regularities and molecular mechanisms of the process, as well as the functions of Hint domains in other protein families (Hh proteins, bacterial BIL domains, etc.). Studies of protein splicing are of importance from both theoretical and applied viewpoints. For instance, comparisons of the inteins found in different domains of life illustrate the role of horizontal transfer in intein spreading. A possible role of inteins in regulating several cell processes is discussed on the basis of recent data.     

Splicing of the Mycobacteriophage Bethlehem DnaB Intein: IDENTIFICATION OF A NEW MECHANISTIC CLASS OF INTEINS THAT CONTAIN AN OBLIGATE BLOCK F NUCLEOPHILE*?

Inteins are single turnover enzymes that splice out of protein precursors during maturation of the host protein (extein). The Cys or Ser at the N terminus of most inteins initiates a four-step protein splicing reaction by forming a (thio)ester bond at the N-terminal splice junction. Several recently identified inteins cannot perform this acyl rearrangement because they do not begin with Cys, Thr, or Ser. This study analyzes one of these, the mycobacteriophage Bethlehem DnaB intein, which we describe here as the prototype for a new class of inteins based on sequence comparisons, reactivity, and mechanism. These Class 3 inteins are characterized by a non-nucleophilic N-terminal residue that co-varies with a non-contiguous Trp, Cys, Thr triplet (WCT) and a Thr or Ser as the first C-extein residue. Several mechanistic differences were observed when compared with standard inteins or previously studied atypical KlbA Ala¹ inteins: (a) cleavage at the N-terminal splice junction in the absence of all standard N- and C-terminal splice junction nucleophiles, (b) activation of the N-terminal splice junction by a variant Block B motif that includes the WCT triplet Trp, (c) decay of the branched intermediate by thiols or Cys despite an ester linkage at the C-extein branch point, and (d) an absolute requirement for the WCT triplet Block F Cys. Based on biochemical data and confirmed by molecular modeling, we propose roles for these newly identified conserved residues, a novel protein splicing mechanism that includes a second branched intermediate, and an intein classification with three mechanistic categories.     

Modular organization of inteins and C-terminal autocatalytic domains.

Analysis of the conserved sequence features of inteins (protein "introns") reveals that they are composed of three distinct modular domains. The N-terminal (N) and C-terminal (C) domains are predicted to perform different parts of the autocatalytic protein splicing reaction. An optional endonuclease domain (EN) is shown to correspond to different types of homing endonucleases in different inteins. The N domain contains motifs predicted to catalyze the first steps of protein splicing, leading to the cleavage of the intein N terminus from its protein host. Intein N domain motifs are also found in C-terminal autocatalytic domains (CADs) present in hedgehog and other protein families. Specific residues in the N domain of intein and CADs are proposed to form a charge relay system involved in cleaving their N-termini. The intein C domain is apparently unique to inteins and contains motifs that catalyze the final protein splicing steps: ligation of the intein flanks and cleavage of its C terminus to release the free intein and spliced host protein. All intein EN domains known thus far have dodecapeptide (DOD, LAGLI-DADG) type homing endonuclease motifs. This work identifies an EN domain with an HNH homing-endonuclease motif and two new small inteins with no EN domains. One of these small inteins might be inactive or a "pseudo intein." The results suggest a modular architecture for inteins, clarify their origin and relationship to other protein families, and extend recent experimental findings on the functional roles of intein N, C, and EN motifs.     

Crystal structures of an intein from the split dnaE gene of Synechocystis sp. PCC6803 reveal the catalytic model without the penultimate histidine and the mechanism of zinc ion inhibition of protein splicing

The first naturally occurring split intein was found in the dnaE gene of Synechocystis sp. PCC6803 and belongs to a subclass of inteins without a penultimate histidine residue. We describe two high-resolution crystal structures, one derived from an excised Ssp DnaE intein and the second from a splicing-deficient precursor protein. The X-ray structures indicate that His147 in the conserved block F activates the side-chain N(delta) atom of the intein C-terminal Asn159, leading to a nucleophilic attack on the peptide bond carbonyl carbon atom at the C-terminal splice site. In this process, Arg73 appears to stabilize the transition state by interacting with the carbonyl oxygen atom of the scissile bond. Arg73 also seems to substitute for the conserved penultimate histidine residue in the formation of an oxyanion hole, as previously identified in other inteins. The finding that the precursor structure contains a zinc ion chelating the highly conserved Cys160 and Asp140 reveals the structural basis of Zn2+-mediated inhibition of protein splicing. Furthermore, it is of interest to observe that the carbonyl carbon atom of Asn159 and N(eta) of Arg73 are 2.6 angstroms apart in the free intein structure and 10.6 angstroms apart in the precursor structure. The orientation change of the aromatic ring of Tyr-1 following the initial acyl shift may be a key switching event contributing to the alignment of Arg73 and the C-terminal scissile bond, and may explain the sequential reaction property of the Ssp DnaE intein.     

Intein harbouring large tandem repeats in replicative DNA helicase of Trichodesmium erythraeum

Protein splicing inteins can be small as approximately 130 aa or up to approximately 600 aa when harbouring an endonuclease domain. Here we report the identification and characterization of an unusually large intein, 1650 aa long and the largest of known inteins, encoded by the replicative DNA helicase gene dnaB of the oceanic N2-fixing cyanobacterium Trichodesmium erythraeum. This Ter DnaB-1 intein co-exists with a 177-aa mini-intein in the same host protein and harbours large tandem repeats in which an 84-aa sequence is repeated 16 times. Comparison between this tandem repeats and the recently reported tandem repeats of Ter DnaE-1 intein revealed differences and similarities. The two tandem repeats, residing in different inteins of different host proteins, differ by 50% in size and have little sequence similarity. Tandem repeats in the Ter DnaB-1 intein were required for the protein splicing activity when tested in Escherichia coli, in contrast to tandem repeats of the Ter DnaE-1 intein that inhibited protein splicing. On the other hand, tandem repeats of both inteins are located in the same corresponding region of the intein sequence and have the same number of repeating units. These suggest that the two tandem repeats could be related but have diverged greatly in size, sequence and effect on protein splicing. Alternatively, they could have independent origins but evolved certain similarities because of common constraints in structure and maintenance.     

The Mycobacterium avium-intracellulare complex dnaB locus and protein intein splicing

Intein is a protein sequence mebedded in-frame within a precursor protein and is posttranslationally excised by a self-catalytic protein splicing process. Protein splicing is believed to follow a pathway requiring Cys, Ser, or Thr residues at the intein N-terminus and substitutions other than Cys, Ser, or Thr residues prevent splicing. We show that the dnaB locus in some strains of M. avium-intracellulare complex (MAC) contains intein and that the intein N-terminal amino acid is Ala [Ala-type]. We demonstrate that the M. avium DnaB precursor protein undergoes posttranslational proteolytic processing producing proteins corresponding to the sizes of the DnaB and intein. Further, by Western analysis we detect a protein corresponding to the size of the spliced DnaB protein in MAC cell extracts. Together, these results indicate that the Ala-type MAC DnaB inteins can splice and provide another example that points to an interesting alternative splicing mechanism (Southworth, M. W., Benner, J., and Perler, F. B., EMBO J. 19, 5019-5026, 2000).