Osteoinductive Effects of Free and Immobilized Bone Forming Peptide-1 on Human Adipose-Derived Stem Cells

Most synthetic polymeric materials currently used for bone tissue engineering lack specific signals through which cells can identify and interact with the surface, resulting in incompatibility and compromised osteogenic activity. Soluble inductive factors also have issues including a short half-live in vivo. Bone forming peptide-1 is a truncated peptide from the immature form of bone morphogenetic protein-7 (BMP-7) that displays higher osteogenic activity than full-length, mature BMP-7. In this study, we used a mussel-inspired immobilization strategy mediated by polymerization of dopamine to introduce recently discovered stimulators of bone forming peptide-1 (BFP-1) onto the surface of poly-lactic-co-glycolic acid (PLGA) substrate to form a biomaterial that overcomes these challenges. Human adipose-derived stem cells (hASCs), being abundant and easy accessible, were used to test the osteogenic activity of BFP-1 and the novel biomaterial. Under osteoinductive conditions, cells treated with both BFP-1 alone and BFP-1-coated biomaterials displayed elevated expression of the osteogenic markers alkaline phosphatase (ALP), osteocalcin (OC), and RUNX2. Furthermore, hASCs associated with poly-dopamine-assisted BFP-1-immobilized PLGA (pDA-BFP-1-PLGA) scaffolds promoted in vivo bone formation in nude mice. Our novel materials may hold great promise for future bone tissue engineering applications.     

Bortezomib enhances the osteogenic differentiation capacity of human mesenchymal stromal cells derived from bone marrow and placental tissues

Bortezomib (BZB) is a chemotherapeutic agent approved for treating multiple myeloma (MM) patients. In addition, there are several reports showing that bortezomib can induce murine mesenchymal stem cells (MSCs) to undergo osteogenic differentiation and increase bone formation in vivo. MSCs are the multipotent stem cells that have capacity to differentiate into several mesodermal derivatives including osteoblasts. Nowadays, MSCs mostly bone marrow derived have been considered as a valuable source of cell for tissue replacement therapy. In this study, the effect of bortezomib on the osteogenic differentiation of human MSCs derived from both bone marrow (BM-MSCs) and postnatal sources such as placenta (PL-MSCs) were investigated. The degree of osteogenic differentiation of BM-MSCs and PL-MSCs after bortezomib treatment was assessed by alkaline phosphatase (ALP) activity, matrix mineralization by Alizarin Red S staining and the expression profiles of osteogenic differentiation marker genes, Osterix, RUNX2 and BSP. The results showed that 1 nM and 2 nM BZB can induce osteogenic differentiation of BM-MSCs and PL-MSCs as demonstrated by increased ALP activity, increased matrix mineralization and up-regulation of osteogenic differentiation marker genes, Osterix, RUNX2 and BSP as compared to controls. The enhancement of osteogenic differentiation of MSCs by bortezomib may lead to the potential therapeutic applications in human diseases especially patients with osteopenia.     

Ectopic Osteogenesis and Scaffold Biodegradation of Nano-Hydroxyapatite-Chitosan in a Rat Model

The bone-formation and scaffold-biodegradation processes have not been fully characterized. This study aimed to determine the osteogenic ability of nHA-CS osteo-induced bone marrow mesenchymal stem cell (BMSC) composites and to explore the relationship between bone formation and scaffold biodegradation. The nHA-CS osteo-induced BMSC composites (nHA-CS+cells group) and the nHA-CS scaffolds (nHA-CS group) were implanted into the femoral spatium intermusculare of SD rats. At 2, 4, 6, 8, and 12 weeks post-implantation, the rat femurs were scanned using computerized tomography (CT), and the CT values of the implants were measured and comparatively analyzed. The implants were then harvested and subjected to hematoxylin and eosin (HE) and Masson''s trichrome staining, and the percentages of bone area, scaffold area and collagen area were compared between the two groups. The CT values of the implants were higher in the nHA-CS+cells group than the nHA-CS group at the same time points (P < 0.05). Histological analysis revealed that de novo bone and collagen formation in the pores of the scaffolds gradually increased from 2 weeks post-implantation in both groups and that the scaffold gradually degraded as bone formation proceeded. However, more de novo bone and collagen formation and scaffold degradation occurred in the nHA-CS+cells group than in the nHA-CS group at the same time points (P < 0.05). In conclusion, nHA-CS osteo-induced BMSC composites are promising bone tissue engineering substitutes, and osteo-induced BMSCs can significantly enhance the osteogenic ability and play an active role in the degradation of nHA-CS scaffolds on par with bone formation.     

Hypoxia induces osteogenic/angiogenic responses of bone marrow‐derived mesenchymal stromal cells seeded on bone‐derived scaffolds via ERK1/2 and p38 pathways

Osteogenesis and angiogenesis are tightly coupled processes during bone development and formation. It is thus well known that the enhancement of vascularization is of great importance in bone tissue engineering. As a potential approach for repairing bone defects, bone tissue constructs should therefore replicate the essential components in vivo microenvironments to promote cell osteogenic differentiation while at same time induce angiogenic response. In light of standpoint above, a combination of human bone‐derived scaffolds and BMSCs that subjected to hypoxia was used to mimic in vivo conditions. Also the underlying cellular/molecular regulation was fully investigated. The results showed that hypoxia (5–10% O₂) greatly enhanced the proliferation of BMSCs seeded in scaffolds, although the hypoxia (5% O₂)‐induced proliferative effect on BMSC cellular scaffolds was not apparent to those cultured in plates. However, such a kind of model was able to significantly induce the osteogenic/angiogenic responses of BMSCs as reflected by osteogenesis or angiogenesis‐related highly expressed genes or proteins, such as alkaline phosphatase, osteocalcin, hypoxia‐inducible factor‐1α and vascular endothelial growth factor. Moreover, ERK1/2 and/or p38 pathways were demonstrated to play essential roles in hypoxia‐induced osteogenic/angiogenic responses. Our results indicated that the combination of bone‐derived scaffolds, a material that has a three dimensional network structure, and hypoxia, an environment that replicates in vivo BMSCs hypoxic living conditions, may be a potential approach for creating functional tissue‐engineered bone. Biotechnol. Bioeng. 2013; 110: 1794–1804. © 2013 Wiley Periodicals, Inc.     

Dexamethasone Enhances Osteogenic Differentiation of Bone Marrow- and Muscle-Derived Stromal Cells and Augments Ectopic Bone Formation Induced by Bone Morphogenetic Protein-2

We evaluated whether dexamethasone augments the osteogenic capability of bone marrow-derived stromal cells (BMSCs) and muscle tissue-derived stromal cells (MuSCs), both of which are thought to contribute to ectopic bone formation induced by bone morphogenetic protein-2 (BMP-2), and determined the underlying mechanisms. Rat BMSCs and MuSCs were cultured in growth media with or without 10-7 M dexamethasone and then differentiated under osteogenic conditions with dexamethasone and BMP-2. The effects of dexamethasone on cell proliferation and osteogenic differentiation, and also on ectopic bone formation induced by BMP-2, were analyzed. Dexamethasone affected not only the proliferation rate but also the subpopulation composition of BMSCs and MuSCs, and subsequently augmented their osteogenic capacity during osteogenic differentiation. During osteogenic induction by BMP-2, dexamethasone also markedly affected cell proliferation in both BMSCs and MuSCs. In an in vivo ectopic bone formation model, bone formation in muscle-implanted scaffolds containing dexamethasone and BMP-2 was more than two fold higher than that in scaffolds containing BMP-2 alone. Our results suggest that dexamethasone potently enhances the osteogenic capability of BMP-2 and may thus decrease the quantity of BMP-2 required for clinical application, thereby reducing the complications caused by excessive doses of BMP-2.Highlights: 1. Dexamethasone induced selective proliferation of bone marrow- and muscle-derived cells with higher differentiation potential. 2. Dexamethasone enhanced the osteogenic capability of bone marrow- and muscle-derived cells by altering the subpopulation composition. 3. Dexamethasone augmented ectopic bone formation induced by bone morphogenetic protein-2.     

In Vivo Assessment of Bone Regeneration in Alginate/Bone ECM Hydrogels with Incorporated Skeletal Stem Cells and Single Growth Factors

The current study has investigated the use of decellularised, demineralised bone extracellular matrix (ECM) hydrogel constructs for in vivo tissue mineralisation and bone formation. Stro-1-enriched human bone marrow stromal cells were incorporated together with select growth factors including VEGF, TGF-β3, BMP-2, PTHrP and VitD3, to augment bone formation, and mixed with alginate for structural support. Growth factors were delivered through fast (non-osteogenic factors) and slow (osteogenic factors) release PLGA microparticles. Constructs of 5 mm length were implanted in vivo for 28 days within mice. Dense tissue assessed by micro-CT correlated with histologically assessed mineralised bone formation in all constructs. Exogenous growth factor addition did not enhance bone formation further compared to alginate/bone ECM (ALG/ECM) hydrogels alone. UV irradiation reduced bone formation through degradation of intrinsic growth factors within the bone ECM component and possibly also ECM cross-linking. BMP-2 and VitD3 rescued osteogenic induction. ALG/ECM hydrogels appeared highly osteoinductive and delivery of angiogenic or chondrogenic growth factors led to altered bone formation. All constructs demonstrated extensive host tissue invasion and vascularisation aiding integration and implant longevity. The proposed hydrogel system functioned without the need for growth factor incorporation or an exogenous inducible cell source. Optimal growth factor concentrations and spatiotemporal release profiles require further assessment, as the bone ECM component may suffer batch variability between donor materials. In summary, ALG/ECM hydrogels provide a versatile biomaterial scaffold for utilisation within regenerative medicine which may be tailored, ultimately, to form the tissue of choice through incorporation of select growth factors.     

Simvastatin coating of TiO2 scaffold induces osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells

Bone tissue engineering requires an osteoconductive scaffold, multipotent cells with regenerative capacity and bioactive molecules. In this study we investigated the osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) on titanium dioxide (TiO₂) scaffold coated with alginate hydrogel containing various concentrations of simvastatin (SIM). The mRNA expression of osteoblast-related genes such as collagen type I alpha 1 (COL1A1), alkaline phosphatase (ALPL), osteopontin (SPP1), osteocalcin (BGLAP) and vascular endothelial growth factor A (VEGFA) was enhanced in hAD-MSCs cultured on scaffolds with SIM in comparison to scaffolds without SIM. Furthermore, the secretion of osteoprotegerin (OPG), vascular endothelial growth factor A (VEGFA), osteopontin (OPN) and osteocalcin (OC) to the cell culture medium was higher from hAD-MSCs cultured on scaffolds with SIM compared to scaffolds without SIM. The TiO₂ scaffold coated with alginate hydrogel containing SIM promote osteogenic differentiation of hAD-MSCs in vitro, and demonstrate feasibility as scaffold for hAD-MSC based bone tissue engineering.     

Tumor Necrosis Factor Improves Vascularization in Osteogenic Grafts Engineered with Human Adipose-Derived Stem/Stromal Cells

The innate immune response following bone injury plays an important role in promoting cellular recruitment, revascularization, and other repair mechanisms. Tumor necrosis factor-α (TNF) is a prominent pro-inflammatory cytokine in this cascade, and has been previously shown to improve bone formation and angiogenesis in a dose- and timing-dependent manner. This ability to positively impact both osteogenesis and vascular growth may benefit bone tissue engineering, as vasculature is essential to maintaining cell viability in large grafts after implantation. Here, we investigated the effects of exogenous TNF on the induction of adipose-derived stem/stromal cells (ASCs) to engineer pre-vascularized osteogenic tissue in vitro with respect to dose, timing, and co-stimulation with other inflammatory mediators. We found that acute (2-day), low-dose exposure to TNF promoted vascularization, whereas higher doses and continuous exposure inhibited vascular growth. Co-stimulation with platelet-derived growth factor (PDGF), another key factor released following bone injury, increased vascular network formation synergistically with TNF. ASC-seeded grafts were then cultured within polycaprolactone-fibrin composite scaffolds and implanted in nude rats for 2 weeks, resulting in further tissue maturation and increased angiogenic ingrowth in TNF-treated grafts. VEGF-A expression levels were significantly higher in TNF-treated grafts immediately prior to implantation, indicating a long-term pro-angiogenic effect. These findings demonstrate that TNF has the potential to promote vasculogenesis in engineered osteogenic grafts both in vitro and in vivo. Thus, modulation and/or recapitulation of the immune response following bone injury may be a beneficial strategy for bone tissue engineering.     

Morphologic and transcriptomic comparison of adipose- and bone-marrow-derived porcine stem cells cultured in alginate hydrogels

Advances in bioengineering, material chemistry, and developmental biology have led to the design of three-dimensional (3D) culture systems that better resemble the surrounding structure and chemistry of the in situ niches of cells in tissues. This study was designed to characterize and compare porcine adipose-derived stem cells (ADSC) and bone-marrow-derived stem cells (BMSC) induced to differentiate toward osteogenic and adipogenic lineages in vitro by using a 3D alginate hydrogel. The morphology and gene expression of the two cell populations during differentiation were analyzed. Both ADSC and BMSC showed morphological evidence of osteogenic and adipogenic differentiation. Expression patterns of genes characteristic of the onset of osteogenic differentiation (ALP, COL1A1, SPARC, SPP1) were low at the beginning of culture and generally increased during the period of differentiation up to 28 days in culture. Expression of genes associated with adipogenic differentiation (ACSL1, ADFP, ADIPOQ, CD36, DBI, DGAT2, PPARG, SCD) was consistently increased in ADSC cultured in alginate hydrogel relative to the start of differentiation. However, adipogenic gene expression of BMSC cultured in alginate hydrogel was more limited when compared with that of ADSC. Evaluation of cell numbers (via the MTT staining assay) suggested a greater viability of BMSC under osteogenic conditions in alginate hydrogels than under adipogenic conditions, whereas ADSC had greater viability under adipogenic conditions than under osteogenic conditions. This study thus provides an important initial evaluation of ADSC and BMSC seeded and differentiated toward the osteogenic and adipogenic cell lineages in a 3D alginate hydrogel in vitro.     

Utility of tricalcium phosphate and osteogenic matrix cell sheet constructs for bone defect reconstruction

AIM: To determine the effects of transplanting osteogenic matrix cell sheets and beta-tricalcium phosphate (TCP) constructs on bone formation in bone defects.METHODS: Osteogenic matrix cell sheets were prepared from bone marrow stromal cells (BMSCs), and a porous TCP ceramic was used as a scaffold. Three experimental groups were prepared, comprised of TCP scaffolds (1) seeded with BMSCs; (2) wrapped with osteogenic matrix cell sheets; or (3) both. Constructs were implanted into a femoral defect model in rats and bone growth was evaluated by radiography, histology, biochemistry, and mechanical testing after 8 wk.RESULTS: In bone defects, constructs implanted with cell sheets showed callus formation with segmental or continuous bone formation at 8 wk, in contrast to TCP seeded with BMSCs, which resulted in bone non-union. Wrapping TCP constructs with osteogenic matrix cell sheets increased their osteogenic potential and resulting bone formation, compared with conventional bone tissue engineering TCP scaffolds seeded with BMSCs. The compressive stiffness (mean ± SD) values were 225.0 ± 95.7, 30.0 ± 11.5, and 26.3 ± 10.6 MPa for BMSC/TCP/Sheet constructs with continuous bone formation, BMSC/TCP/Sheet constructs with segmental bone formation, and BMSC/TCP constructs, respectively. The compressive stiffness of BMSC/TCP/Sheet constructs with continuous bone formation was significantly higher than those with segmental bone formation and BMSC/TCP constructs.CONCLUSION: This technique is an improvement over current methods, such as TCP substitution, and is useful for hard tissue reconstruction and inducing earlier bone union in defects.     

Characteristic differences among osteogenic cell populations of rat bone marrow stromal cells isolated from untreated, hemolyzed or Ficoll-treated marrow

Background aimsAlthough bone marrow (BM) stromal cells (SC; BMSC) isolated from adherent cultures of untreated BM are known to contain both committed and uncommitted osteogenic cells, it remains unknown whether BMSC isolated either by hemolysis or Ficoll centrifugation also contain both of these populations.MethodsDifferences in the osteogenic cell populations of rat BMSC isolated from untreated, hemolyzed or Ficoll-treated BM were analyzed by in vivo transplantation, flow cytometry, alkaline phosphatase (ALP) assay, real-time polymerase chain reaction (PCR) and alizarin red staining.ResultsTransplantation of non-cultured samples indicated that the Ficolled BMSC contained the lowest number of committed osteogenic cells. Flow cytometric analysis of cultured, non-induced samples showed that the percentage of ALP-positive cells was significantly lower in Ficolled BMSC. Quantitative ALP assays confirmed that the lowest ALP activity was in the Ficolled BMSC. Hemolyzed BMSC also contained lower numbers of committed osteogenic cells than untreated BMSC, but still more than Ficolled BMSC. Interestingly, the Ficolled BMSC showed the greatest levels of osteogenic ability when cultured in osteogenic induction medium.ConclusionsThese findings suggest that, although Ficolled BMSC rarely contain committed osteogenic cells, they are able to show comparable or even greater levels of osteogenic ability after induction, possibly because they contain a greater proportion of uncommitted stem cells. In contrast, induction is optional but recommended for both untreated and hemolyzed BMSC before use, because both these groups contain both committed and uncommitted osteogenic cells. These findings are of significant importance when isolating BMSC for use in bone tissue engineering.     

IL-6 Contributes to the Defective Osteogenesis of Bone Marrow Stromal Cells from the Vertebral Body of the Glucocorticoid-Induced Osteoporotic Mouse

Osteoporosis is one of the most prevalent skeletal system diseases. It is characterized by a decrease in bone mass and microarchitectural changes in bone tissue that lead to an attenuation of bone resistance and susceptibility to fracture. Vertebral fracture is by far the most prevalent osteoporotic fracture. In the musculoskeletal system, osteoblasts, originated from bone marrow stromal cells (BMSC), are responsible for osteoid synthesis and mineralization. In osteoporosis, BMSC osteogenic differentiation is defective. However, to date, what leads to the defective BMSC osteogenesis in osteoporosis remains an open question. In the current study, we made attempts to answer this question. A mouse model of glucocorticoid-induced osteoporosis (GIO) was established and BMSC were isolated from vertebral body. The impairment of osteogenesis was observed in BMSC of osteoporotic vertebral body. The expression profiles of thirty-six factors, which play important roles in bone metabolisms, were compared through antibody array between normal and osteoporotic BMSC. Significantly higher secretion level of IL-6 was observed in osteoporotic BMSCs compared with normal control. We provided evidences that IL-6 over-secretion impaired osteogenesis of osteoporotic BMSC. Further, it was observed that β-catenin activity was inhibited in response to IL-6 over-secretion. More importantly, in vivo administration of IL-6 neutralizing antibody was found to be helpful to rescue the osteoporotic phenotype of mouse vertebral body. Our study provides a deeper insight into the pathophysiology of osteoporosis and identifies IL-6 as a promising target for osteoporosis therapy.     

Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats

The design of bioactive three-dimensional (3D) scaffolds is a major focus in bone tissue engineering. Incorporation of growth factors into bioprinted scaffolds offers many new possibilities regarding both biological and architectural properties of the scaffolds. This study investigates whether the sustained release of bone morphogenetic protein 2 (BMP-2) influences osteogenicity of tissue engineered bioprinted constructs. BMP-2 loaded on gelatin microparticles (GMPs) was used as a sustained release system, which was dispersed in hydrogel-based constructs and compared to direct inclusion of BMP-2 in alginate or control GMPs. The constructs were supplemented with goat multipotent stromal cells (gMSCs) and biphasic calcium phosphate to study osteogenic differentiation and bone formation respectively. BMP-2 release kinetics and bioactivity showed continuous release for three weeks coinciding with osteogenicity. Osteogenic differentiation and bone formation of bioprinted GMP containing constructs were investigated after subcutaneous implantation in mice or rats. BMP-2 significantly increased bone formation, which was not influenced by the release timing. We showed that 3D printing of controlled release particles is feasible and that the released BMP-2 directs osteogenic differentiation in vitro and in vivo.     

Simple evaluation method for osteoinductive capacity of cells or scaffolds using ceramic cubes

Mesenchymal stem cells are good candidates for the clinical application of bone repair because of their osteogenic differentiation potential, but in vivo osteoinduction potential should be verified for culture expanded cells before clinical application. This study analyzed in vivo bone formation by MSCs quantitatively after implantation of MSCs planted porous biphasic ceramic cubes into athymic mice. MSCs were divided into osteogenic differentiation-induced and normal groups and also tested in vitro to evaluate the degree of differentiation into osteoblasts. The osteogenic induced group showed higher alkaline phosphatase and calcium level in vitro and corresponding higher level of bone formation in vivo compared to control group. Whereas there was no bone formation observed in fibroblast-implanted negative control group. In critical sized bone defect models, commonly used for evaluation of bone regeneration ability, it is difficult to distinguish between osteoinduction and osteoconduction, and quantitative analysis is not simple. However, this method for evaluating osteoinduction is both accurate and simple. In conclusion, the analysis of in vivo bone formation using porous ceramic cubes is a powerful and simple method for evaluating the osteoinduction ability of target cells and, furthermore, can be applied for evaluation of scaffolds for their osteoinductive properties.