Molecular cloning, structural analysis, and expression in Escherichia coli of a chitinase gene from Enterobacter agglomerans.

The gene chiA, which codes for endochitinase, was cloned from a soilborne Enterobacter agglomerans. Its complete sequence was determined, and the deduced amino acid sequence of the enzyme designated Chia_Entag yielded an open reading frame coding for 562 amino acids of a 61-kDa precursor protein with a putative leader peptide at its N terminus. The nucleotide and polypeptide sequences of Chia_Entag showed 86.8 and 87.7% identity with the corresponding gene and enzyme, Chia_Serma, of Serratia marcescens, respectively. Homology modeling of Chia_Entag's three-dimensional structure demonstrated that most amino acid substitutions are at solvent-accessible sites. Escherichia coli JM109 carrying the E. agglomerans chiA gene produced and secreted Chia_Entag. The antifungal activity of the secreted endochitinase was demonstrated in vitro by inhibition of Fusarium oxysporum spore germination. The transformed strain inhibited Rhizoctonia solani growth on plates and the root rot disease caused by this fungus in cotton seedlings under greenhouse conditions.     

The complete nucleotide sequence of the Bacillus licheniformis NM105 S-layer-encoding gene

A protein present on the cell surface of Bacillus licheniformis (Bl) NM105 was identified as an S-layer (OlpA in this paper), a protein present on many bacterial cell surfaces. Purification, SDS-PAGE and isoelectrofocusing showed one 94-kDa, slightly acidic (pI 6.5) protein band (defined as OlpA). The pure protein OlpA, has a tetragonal symmetry of its morphological subunits. Following Edman degradation, three 17-mer oligodeoxyribonucleotide (oligo) probes corresponding to the N-terminal sequence of OlpA were synthesized and used for gene cloning. The nucleotide (nt) sequence of the cloned gene (olpA) showed an ORF and encoded an 874 amino acid (aa) protein. In the promoter region of olpA, there appear to be -10 and -35 ∂^A-binding sites, as well as -10 and -35 regions specific for∂^H. The existence of these two potential promoters suggests that OlpA would be produced during both the vegetative and sporulating stages of growth. The ribosome-binding site (RBS) sequence perfectly matched its consensus sequence, suggesting a high efficiency of translation of olpA. A typical 29-aa leader peptide, characteristic of secretory proteins in Bacilli, is present in the OlpA pre-protein sequence. In olpA, there are two stem-loop structures in tandem, downstream from the stop codon. These stem-loops are probably involved in prolonged olpA expression, by extending the half life of the mRNA.     

An exported rhodanese-like protein is induced during growth of Acidithiobacillus ferrooxidans in metal sulfides and different sulfur compounds

By proteomic analysis we found a 21-kDa protein (P21) from Acidithiobacillus ferrooxidans ATCC 19859 whose synthesis was greatly increased by growth of the bacteria in pyrite, thiosulfate, elemental sulfur, CuS, and ZnS and was almost completely repressed by growth in ferrous iron. After we determined the N-terminal amino acid sequence of P21, we used the available preliminary genomic sequence of A. ferrooxidans ATCC 23270 to isolate the DNA region containing the p21 gene. The nucleotide sequence of this DNA fragment contained a putative open reading frame (ORF) coding for a 23-kDa protein. This difference in size was due to the presence of a putative signal peptide in the ORF coding for P21. When p21 was cloned and overexpressed in Escherichia coli, the signal peptide was removed, resulting in a mature protein with a molecular mass of 21 kDa and a calculated isoelectric point of 9.18. P21 exhibited 27% identity and 42% similarity to the Deinococcus radiodurans thiosulfate-sulfur transferase (rhodanese; EC 2.8.1.1) and similar values in relation to other rhodaneses, conserving structural domains and an active site with a cysteine, both characteristic of this family of proteins. However, the purified recombinant P21 protein did not show rhodanese activity. Unlike cytoplasmic rhodaneses, P21 was located in the periphery of A. ferrooxidans cells, as determined by immunocytochemical analysis, and was regulated depending on the oxidizable substrate. The genomic context around gene p21 contained other ORFs corresponding to proteins such as thioredoxins and sulfate-thiosulfate binding proteins, clearly suggesting the involvement of P21 in inorganic sulfur metabolism in A. ferrooxidans.     

Structure of the cel-3 gene from Fibrobacter succinogenes S85 and characteristics of the encoded gene product, endoglucanase 3.

The cel-3 gene cloned from Fibrobacter succinogenes into Escherichia coli coded for the enzyme EG3, which exhibited both endoglucanase and cellobiosidase activities. The gene had an open reading frame of 1,974 base pairs, coding for a protein of 73.4 kilodaltons (kDa). However, the enzyme purified from the osmotic shock fluid of E. coli was 43 kDa. The amino terminus of the 43-kDa protein matched amino acid residue 266 of the protein coded for by the open reading frame, indicating proteolysis in E. coli. In addition to the 43-kDa protein, Western immunoblotting revealed a 94-kDa membranous form of the enzyme in E. coli and a single protein of 118 kDa in F. succinogenes. Thus, the purified protein appears to be a proteolytic degradation product of a native protein which was 94 kDa in E. coli and 118 kDa in F. succinogenes. The discrepancy between the molecular weight expected on the basis of the DNA sequence and the in vivo form may be due to anomalous migration during electrophoresis, to glycosylation of the native enzyme, or to fatty acyl substitution at the N terminus. One of two putative signal peptide cleavage sites bore a strong resemblance to known lipoprotein leader sequences. The purified 43-kDa peptide exhibited a high Km (53 mg/ml) for carboxymethyl cellulose but a low Km (3 to 4 mg/ml) for lichenan and barley beta-glucan. The enzyme hydrolyzed amorphous cellulose, and cellobiose and cellotriose were the major products of hydrolysis. Cellotriose, but not cellobiose, was cleaved by the enzyme. EG3 exhibited significant amino acid sequence homology with endoglucanase CelC from Clostridium thermocellum, and as with both CelA and CelC of C. thermocellum, it had a putative active site which could be aligned with the active site of hen egg white lysozyme at the highly conserved amino acid residues Asn-44 and Asp-52.     

The Alcaligenes eutrophus ldh structural gene encodes a novel type of lactate dehydrogenase

Abstract The lactate dehydrogenase gene, ldh , of Alcaligenes eutrophus H16 was identified on a 14-kbp Eco RI restriction fragment of a genomic library in the cosmid pHC79 by hybridization with a 50-mer synthetic oligonucleotide which was derived from the N-terminal amino acid sequence of the purified enzyme. Recombinant strains of Escherichia coli JM83, which harboured a 2.0-kbp Pst I subfragment in pUC9-1, expressed LDH at a high level, if ldh was downstream from and colinear to the E. coli lac promoter. The nucleotide sequence of a region of 4245 bp revealed several open reading frames which might represent coding regions. One represented the ldh gene. The amino acid sequence deduced from ldh exhibited 29% and 36% identity to the L-malate dehydrogenase of Methanothermus fervidus and to the putative translation product of an E. coli sequence of unknown function, respectively. The ldh was separated by short intergenic regions from two other open reading frames: ORF5 was located downstream of and colinear to ldh , and its putative translational product revealed 38 to 56% amino acid identity to penicillin-binding proteins. ORF3 was located upstream of and colinear to ldh , and its putative gene translational product represented a hydrophobic protein. A sequence, which resembled the A. eutrophus alcohol dehydrogenase promoter, was detected upstream of ORF3, which most probably represents the first transcribed gene of an operon consisting of ORF3, ldh and ORF5.     

Molecular cloning and sequence analysis of a gene encoding an extracellular proteinase from Lactobacillus helveticus CP790

A 2.6-kilobase HaeIII DNA fragment corresponding to an extracellular proteinase gene (prtY) was cloned from chromosomal DNA of Lactobacillus helveticus CP790 in Escherichia coli using a pKK223-3 vector. The transformant expressed a 48-kDa protein that reacts with monoclonal antibodies specific to the proteinase and seemed to be a pre-proproteinase, but had no proteolytic activity. About 1.6 kilobases of the 2.6-kilobase DNA fragment, which contained the complete gene for the proteinase was sequenced. Sequence analysis found an open reading frame with a capacity to encode a protein of 449 amino acids. The coding region contained a Gram-positive-type signal peptide of 30 amino acids. The N-terminal sequences of the proproteinase and the mature proteinase have been observed in the polypeptide at position + 31 and + 38. The putative amino acid sequence showed a significant similarity to a surface layer protein of L. helveticus and Lactobacillus acidophilus in the amino terminal signal sequence and carboxyl terminus.     

Delineation of the minimal portion of the Bacillus sphaericus 1593M toxin required for the expression of larvicidal activity

The two genes of Bacillus sphaericus 1953M coding for the 51.4-kDa and 41.9-kDa proteins are both required for the expression of the active larvicidal toxin in Escherichia coli. The minimal size of the active peptide of the 41.9-kDa toxin was defined by in vitro deletion analysis of the gene and found to consist of 338 amino acids (38.3 kDa). N-terminal deletions past the Ile18 residue and C-terminal deletions past the His352 residue result in the loss of toxic activity and rapid degradation of such modified toxins by host proteases. The minimal active 38.3-kDa peptide produced in E. coli seems to mimick the stable processed form of the toxin found in larval midguts. However, it still requires the action of the synergistic 51.4-kDa protein for the larvicidal activity.     

The aman6 gene encoding a yeast mannan backbone degrading 1,6-alpha-D-mannanase in Bacillus circulans: cloning, sequence analysis, and expression

A gene (aman6) encoding endo-1,6-alpha-D-mannanase, a yeast mannan backbone degrading enzyme from Bacillus circulans was cloned. The putative aman6 was 1,767 base pairs long and encoded a mature 1,6-alpha-D-mannanase protein of 589 amino acids and a signal peptide of 36 amino acids. The purified mature 1,6-alpha-D-mannanase from the Escherichia coli transformant showed 61-kDa protein, and N-terminal amino acid sequence and other general properties of the recombinant enzyme were identical to those of 1,6-alpha-D-mannanase from Bacillus circulans TN-31.     

Purification and characterization of Clostridium perfringens 120-kilodalton collagenase and nucleotide sequence of the corresponding gene.

Clostridium perfringens type C NCIB 10662 produced various gelatinolytic enzymes with molecular masses ranging from approximately 120 to approximately 80 kDa. A 120-kDa gelatinolytic enzyme was present in the largest quantity in the culture supernatant, and this enzyme was purified to homogeneity on the basis of sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme was identified as the major collagenase of the organism, and it cleaved typical collagenase substrates such as azocoll, a synthetic substrate (4-phenylazobenzyloxy-carbonyl-Pro-Leu-Gly-Pro-D-Arg [Pz peptide]), and a type I collagen fibril. In addition, a gene (colA) encoding a 120-kDa collagenase was cloned in Escherichia coli. Nested deletions were used to define the coding region of colA, and this region was sequenced; from the nucleotide sequence, this gene encodes a protein of 1,104 amino acids (M(r), 125,966). Furthermore, from the N-terminal amino acid sequence of the purified enzyme which was found in this reading frame, the molecular mass of the mature enzyme was calculated to be 116,339 Da. Analysis of the primary structure of the gene product showed that the enzyme was produced with a stretch of 86 amino acids containing a putative signal sequence. Within this stretch was found PLGP, the amino acid sequence constituting the Pz peptide. This sequence may be implicated in self-processing of the collagenase. A consensus zinc-binding sequence (HEXXH) suggested for vertebrate Zn collagenases is present in this bacterial collagenase. Vibrio alginolyticus collagenase and Achromobacter lyticus protease I showed significant homology with the 120-kDa collagenase of C. perfringens, suggesting that these three enzymes are evolutionarily related.     

Structure of the beta-1,3-1,4-glucanase gene of Bacillus macerans: homologies to other beta-glucanases

Summary The nucleotide sequence of an 852 base pair (bp) DNA fragment containing the entire gene coding for thermostable beta- 1,3-1,4-glucanase ofBacillus macerans has been determined. ThebglM gene comprises an open reading frame (ORF) of 711 by (237 codons) starting with ATG at position 93 and extending to the translational stop codon TAA at position 804. The deduced amino acid sequence of the mature protein shows 70% homology to published sequences of mesophilic beta- 1,3-1,4-glucanases fromB. subtilis andB. amyloliquefaciens. The sequence coding for mature beta-glucanase is preceded by a putative signal peptide of 25 amino acid residues, and a sequence resembling a ribosome-binding site (GGAGG) before the initiation codon. By contrast with the processed protein, the N-terminal amino acid sequence constituting the putative leader peptide bears no or only weak homology to signal peptides of mesophilicBacillus endo-beta-glucanases. TheB. macerans signal peptide appears to be functional in exporting the enzyme to the periplasm inE. coli. More than 50% of the whole glucanase activity was localized in the periplasmic space and in the supernatant. Whereas homology to endo-1,4-beta-glucanases is completely lacking, a weak amino acid homology between the sequence surrounding the active site of phage T4 lysozyme and a sequence spanning residues 126 through 161 ofB. macerans endo-beta-glucanase could be identified.     

Sequence analysis of a gene cluster involved in metabolism of 2,4,5-trichlorophenoxyacetic acid by Burkholderia cepacia AC1100.

Burkholderia cepacia AC1100 utilizes 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) as a sole source of carbon and energy. PT88 is a chromosomal deletion mutant of B. cepacia AC1100 and is unable to grow on 2,4,5-T. The nucleotide sequence of a 5.5-kb chromosomal fragment from B. cepacia AC1100 which complemented PT88 for growth on 2,4,5-T was determined. The sequence revealed the presence of six open reading frames, designated ORF1 to ORF6. Five polypeptides were produced when this DNA region was under control of the T7 promoter in Escherichia coli; however, no polypeptide was produced from the fourth open reading frame, ORF4. Homology searches of protein sequence databases were performed to determine if the proteins involved in 2,4,5-T metabolism were similar to other biodegradative enzymes. In addition, complementation studies were used to determine which genes were essential for the metabolism of 2,4,5-T. The first gene of the cluster, ORF1, encoded a 37-kDa polypeptide which was essential for complementation of PT88 and showed significant homology to putative trans-chlorodienelactone isomerases. The next gene, ORF2, was necessary for complementation and encoded a 47-kDa protein which showed homology to glutathione reductases. ORF3 was not essential for complementation; however, both the 23-kDa protein encoded by ORF3 and the predicted amino acid sequence of ORF4 showed homology to glutathione S-transferases. ORF5, which encoded an 11-kDa polypeptide, was essential for growth on 2,4,5-T, but the amino acid sequence did not show homology to those of any known proteins. The last gene of the cluster, ORF6, was necessary for complementation of PT88, and the 32-kDa protein encoded by this gene showed homology to catechol and chlorocatechol-1,2-dioxygenases.     

Antigenic proteins of Mycobacterium leprae. Complete sequence of the gene for the 18-kDa protein

Recombinant clones expressing antigenic determinants of the 18-kDa protein antigen from Mycobacterium leprae recognized by the L5 monoclonal antibody were isolated from a lambda gt11 expression library and their nucleotide sequences determined. All clones expressed the M. leprae-specific determinant as part of a large fusion protein with Escherichia coli beta-galactosidase. The deduced amino acid sequence of the coding region indicated that all the lambda gt11 recombinant clones contained an incomplete M. leprae gene sequence representing the carboxy-terminal two-thirds (111 amino acids) of the 18-kDa gene and coding for a peptide of m.w. 12,432. Subsequent isolation and sequencing of a 3.2kb BamHI-PstI DNA fragment from a genomic M. leprae cosmid library permitted the deduction of the complete 148 amino acid sequence with a predicted m.w. of 16,607. A second open reading frame 560 bases downstream from the 18-kDa coding sequence was found to code for a putative protein of 137 amino acids (m.w. = 15,196). Neither this nor the 18-kDa amino acid sequence displayed any significant homologies with any proteins in the GENBANK, EMBL, or NBRF data bases. Crude lysates from recombinant lambda gt11 clones expressing part of the 18-kDa protein have been reported to stimulate the proliferation of some M. leprae-specific helper T cell clones. Thus, it is significant that the complete 18-kDa sequence contains five short peptides predicted to be possible helper T cell antigenic epitopes based on their propensity to form amphipathic helices. Although three of these occur within the 111 amino acid carboxy-terminal peptide expressed by lambda gt11 clones, the most highly amphipathic peptide is found in the amino-terminal region not present in the lambda gt11 recombinants.     

Characterization,Identification, and Cloning of the S-Layer Protein from <Emphasis Type="Italic">Cytophaga</Emphasis> sp.

We characterized, identified, and cloned a major protein which comprised 16% of the total proteins from Cytophaga sp. cell lysate. After French pressing, the fraction of cell envelope was treated with 0.2% Triton X-100 to remove cell membranes. Subsequent SDS-PAGE analysis of the Triton X-100-insoluble cell wall revealed a protein of 120 kDa with a pI of 5.4, which was identified by gold immunostaining as the surface (S)-layer protein of this soil bacterium. The nucleotide sequence of the cloned S-layer protein gene (slp) encoding this protein consisted of 3144 nucleotides with an ORF for 1047 amino acids, which included a typical 32-amino acid leader peptide sequence. Amino acid sequence alignment revealed 29–48% similarity between this protein and the S-layer proteins from other prokaryotic organisms. The 120-kDa protein from the Cytophaga sp. cell lysate has been characterized as a member of the S-layer proteins, and the slp gene was cloned and expressed in Escherichia coli. E. coli harboring the plasmid containing the 600- or 800-bp DNA fragment upstream of the initiation codon of the slp gene, in the presence of the reporter gene rsda (raw starch digesting amylase), showed amylase activity in starch containing plate. The putative promoter region of slp located 600 bp upstream of the initiation codon might be used for foreign gene expression.     

Characterization of the Lactococcus lactis nisin A operon genes nisP, encoding a subtilisin-like serine protease involved in precursor processing, and nisR, encoding a regulatory protein involved in nisin biosynthesis.

Biosynthesis of the lantibiotic peptide nisin by Lactococcus lactis NIZO R5 relies on the presence of the conjugative transposon Tn5276 in the chromosome. A 12-kb DNA fragment of Tn5276 including the nisA gene and about 10 kb of downstream DNA was cloned in L. lactis, resulting in the production of an extracellular nisin precursor peptide. This peptide reacted with antibodies against either nisin A or the synthetic leader peptide, suggesting that it consisted of a fully modified nisin with the nisin leader sequence still attached to it. This structure was confirmed by N-terminal sequencing and 1H-nuclear magnetic resonance analysis of the purified peptide. Deletion studies showed that the nisR gene is essential for the production of this intermediate. The deduced amino acid sequence of the nisR gene product indicated that the protein belongs to the family of two-component regulators. The deduced amino acid sequence of NisP, the putative product of the gene upstream of nisR, showed an N-terminal signal sequence, a catalytic domain with a high degree of similarity to those of subtilisin-like serine proteases, and a putative C-terminal membrane anchor. Cell extracts of Escherichia coli overexpressing nisP were able to cleave the nisin precursor peptide, producing active, mature nisin. A similar activation was obtained with whole cells but not with membrane-free extracts of L. lactis strains carrying Tn5276 in which the nisA gene had been inactivated. The results indicate that the penultimate step in nisin biosynthesis is secretion of precursor nisin without cleavage of the leader peptide, whereas the last step is the cleavage of the leader peptide sequence from the fully maturated nisin peptide.     

S-layer protein gene of Acetogenium kivui: cloning and expression in Escherichia coli and determination of the nucleotide sequence.

Acetogenium kivui is anaerobically growing thermophilic bacterium with a gram-positive type of cell wall structure. The outer surface is covered with a hexagonally packed surface (S) layer. The gene coding for the S-layer polypeptide was cloned in Escherichia coli on two overlapping fragments by using the plasmid pUC18 as the vector. It was expressed under control of a cloned Acetogenium promoter or the lacZ gene. We determined the complete sequence of the structural gene. The mature polypeptide comprises 736 amino acids and is preceded by a typical procaryotic signal sequence of 26 amino acids. It i weakly acidic, weakly hydrophilic, and contains a relatively high proportion of hydroxyamino acids, including two clusters of serine and threonine residues. An N-terminal region of about 200 residues is homologous to the N-terminal part of the middle wall protein, one of the two S-layer proteins of Bacillus brevis, and there is also an internal homology within the N-terminal region of the A. kivui polypeptide.     

Characterization of an S-layer glycoprotein produced in the course of S-layer variation of<Emphasis Type="Italic"> Bacillus stearothermophilu</Emphasis>s ATCC 12980 and sequencing and cloning of the<Emphasis Type="Italic"> sbsD</Emphasis> gene encoding the protein moiety

The cell surface of Bacillus stearothermophilus ATCC 12980 is completely covered by an oblique lattice which consists of the S-layer protein SbsC. On SDS-polyacrylamide gels, the mature S-layer protein migrates as a single band with an apparent molecular mass of 122 kDa. During cultivation of B. stearothermophilus ATCC 12980 at 67 degrees C instead of 55 degrees C, a variant developed that had a secondary cell wall polymer identical to that of the wild-type strain, but it carried an S-layer glycoprotein that could be separated on SDS-polyacrylamide gels into four bands with apparent molecular masses of 92, 118, 150 and 175 kDa. After deglycosylation, only a single protein band with a molecular mass of 92 kDa remained. The complete nucleotide sequence encoding the protein moiety of this S-layer glycoprotein, termed SbsD, was established by PCR and inverse PCR. The sbsD gene of 2,709 bp is predicted to encode a protein of 96.2 kDa with a 30-amino-acid signal peptide. Within the 807 bp encoding the signal peptide and the N-terminal sequence (amino acids 31-269), different nucleotides for sbsD and sbsC were observed in 46 positions, but 70% of these mutations were silent, thus leading to a level of identity of 95% for the N-terminal parts. The level of identity of the remaining parts of SbsD and SbsC was below 10%, indicating that the lysine-, tyrosine- and arginine-rich N-terminal region in combination with a distinct type of secondary cell wall polymer remained conserved upon S-layer variation. The sbsD sequence encoding the mature S-layer protein cloned into the pET28a vector led to stable expression in Escherichia coli HMS174(DE3). This is the first example demonstrating that S-layer variation leads to the synthesis of an S-layer glycoprotein.     

The S-layer protein from Campylobacter rectus: sequence determination and function of the recombinant protein

The gene encoding the crystalline surface layer (S-layer) protein from Campylobacter rectus , designated slp , was sequenced and the recombinant gene product was expressed in Escherichia coli . The gene consisted of 4086 nucleotides encoding a protein with 1361 amino acids. The N-terminal amino acid sequence revealed that Slp did not contain a signal sequence, but that the initial methionine residue was processed. The deduced amino acid sequence displayed some common characteristic features of S-layer proteins previously reported. A homology search showed a high similarity to the Campylobacter fetus S-layer proteins, especially in their N-terminus. The C-terminal third of Slp exhibited homology with the RTX toxins from Gram-negative bacteria via the region including the glycine-rich repeats. The Slp protein had the same N-terminal sequence as a 104-kDa cytotoxin isolated from the culture supernatants of C. rectus . However, neither native nor recombinant Slp showed cytotoxicity against HL-60 cells or human peripheral white blood cells. These data support the idea that the N-terminus acts as an anchor to the cell surface components and that the C-terminus is involved in the assembly and/or transport of the protein.     

The psychrophilic bacterium Pseudoalteromonas halosplanktis TAC125 possesses a gene coding for a cold-adapted feruloyl esterase activity that shares homology with esterase enzymes from gamma-proteobacteria and yeast

The complete genome of the psychrophilic bacteria Pseudoalteromonas haloplanktis TAC 125, recently published, owns a gene coding for a putative esterase activity corresponding to the ORF PSHAa1385, also classified in the Carbohydrate Active Enzymes database (CAZY) belonging to family 1 of carbohydrate esterase proteins. This ORF is 843 bp in length and codes for a protein of 280 amino acid residues. In this study we characterized and cloned the PSHAa1385 gene in Escherichia coli. We also characterized the recombinant protein by biochemical and biophysical methodologies. The PSHAa1385 gene sequence showed a significant homology with several carboxyl-esterase and acetyl-esterase genes from gamma-proteobacteria genera and yeast. The recombinant protein exhibited a significant activity towards pNP-acetate, alpha-and beta-naphthyl acetate as generic substrates, and 4-methylumbelliferyl p-trimethylammonio cinnamate chloride (MUTMAC) as a specific substrate, indicating that the protein exhibits a feruloyl esterase activity that it is displayed by similar enzymes present in other organisms. Finally, a three-dimensional model of the protein was built and the amino acid residues involved in the catalytic function of the protein were identified.