Allometry of the baculum and sexual size dimorphism in American martens and fishers (Mammalia: Mustelidae)

Genitalia are among the most variable of morphological traits, and recent research suggests that this variability may be the result of sexual selection. For example, large bacula may undergo post‐copulatory selection by females as a signal of male size and age. This should lead to positive allometry in baculum size. In addition to hyperallometry, sexually selected traits that undergo strong directional selection should exhibit high phenotypic variation. Nonetheless, in species in which pre‐copulatory selection predominates over post‐copulatory selection (such as those with male‐biased sexual size dimorphism), baculum allometry may be isometric or exhibit negative allometry. We tested this hypothesis using data collected from two highly dimorphic species of the Mustelidae, the American marten (Martes americana) and the fisher (Martes pennanti). Allometric relationships were weak, with only 4.5–10.1% of the variation in baculum length explained by body length. Because of this weak relationship, there was a large discrepancy in slope estimates derived from ordinary least squares and reduced major axis regression models. We conclude that stabilizing selection rather than sexual selection is the evolutionary force shaping variation in baculum length because allometric slopes were less than one (using the ordinary least squares regression model), a very low proportion of variance in baculum length was explained by body length, and there was low phenotypic variability in baculum length relative to other traits. We hypothesize that this pattern occurs because post‐copulatory selection plays a smaller role than pre‐copulatory selection (manifested as male‐biased sexual size dimorphism). We suggest a broader analysis of baculum allometry and sexual size dimorphism in the Mustelidae, and other taxonomic groups, coupled with a comparative analysis and with phylogenetic contrasts to test our hypothesis. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 104 , 955–963.     

Sexual selection,phenotypic variation,and allometry in genitalic and non‐genitalic traits in the sexually size‐dimorphic stick insect Micrarchus hystriculeus

The mobility hypothesis could explain the evolution of female‐biased size dimorphism if males with a smaller body size and longer legs have an advantage in scramble competition for mates. This hypothesis is tested by performing a selection analysis in the wild on Micrarchus hystriculeus (Westwood) (Phasmatodea), a sexually size dimorphic stick insect endemic to New Zealand. This analysis examined the form and strength of sexual selection on body size, leg lengths (front, mid and hind), and clasper size (a genitalic trait), and also quantified the degree of phenotypic variation and the allometric scaling pattern of these traits. By contrast to the mobility hypothesis, three lines of evidence were found to support significant stabilizing sexual selection on male hind leg length: a significant nonlinear selection gradient, negative static allometry, and a low degree of phenotypic variation. Hind leg length might be under stabilizing selection in males if having average‐sized legs facilitates female mounting or improves a male's ability to achieve the appropriate copulation position. As predicted, a negative allometric scaling pattern and low phenotypic variation of clasper size is suggestive of stabilizing selection and supports the ‘one‐size‐fits‐all’ hypothesis. Opposite to males, the mid and hind leg lengths of females showed positive static allometry. Relatively longer mid and hind leg lengths in larger females might benefit individuals via the better support of their larger abdomens. © 2014 The Linnean Society of London, Biological Journal of the Linnean Society, 2014, 113 , 471–484.     

Genotype × environment interaction in the allometry of body,genitalia and signal traits in Enchenopa treehoppers (Hemiptera: Membracidae)

Developmental plasticity may promote divergence by exposing genetic variation to selection in novel ways in new environments. We tested for this effect in the static allometry (i.e. scaling on body size) of traits in advertisement signals, body and genitalia. We used a member of the Enchenopa binotata species complex of treehoppers – a clade of plant‐feeding insects in which speciation is associated with colonization of novel environments involving marked divergence in signals, subtle divergence in body size and shape, and no apparent divergence in genitalia. We found no change in mean allometric slopes across environments, but substantial genetic variation and genotype × environment interaction (G × E) in allometry. The allometry of signal traits showed the most genetic variation and G × E, and that of genitalia showed the weakest G × E. Our findings suggest that colonizing novel environments may have stronger diversifying consequences for signal allometry than for genitalia allometry. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 105 , 187–196.     

Allometry of a sexual trait in relation to diet experience and alternative mating tactics in two rubyspot damselflies (Calopterygidae: Hetaerina)

Several arguments have been put forward to explain how sexual selection drives the evolution of sexual trait allometry, especially hyperallometry. The ‘positive allometry theory’ suggests that hyperallometry is a rule in all‐secondary sexual traits, whereas the ‘display hypothesis’ suggests that only males in good condition will exhibit hyperallometric sexual display traits. In the present study, we investigated: (1) the condition‐dependence nature (by using two diet treatments that varied in the amount of food provided to the larvae) of a sexually selected trait (wing pigmentation; WP) in recently‐emerged adults of the American rubyspot damselfly, Hetaerina americana, and (2) the scaling relationship between WP and body size (wing and body length) in the rubyspot damselflies H. americana and Hetaerina vulnerata, according to alternative reproductive tactics (ARTs; territorial and nonterritorial males). First, we found support that indicated that diet positively affected WP length, although there was no significant WP allometric pattern in relation to diet regimes. Second, WP was hyperallometric in both Hetaerina species. WP size was similar between ARTs and, in H. americana (but not H. vulnerata), nonterritorial males showed steeper slopes than territorial males when wing length was used. The results obtained support the notion that sexual traits are hyperallometric, although there is no clear pattern in relation to ARTs. © 2013 The Linnean Society of London     

Genital and body allometry in two species of noctuid moths (Lepidoptera: Noctuidae)

One‐size‐fits‐all and related hypotheses predict that static allometry slopes for male genitalia will be consistently lower than 1.0 and lower than the slopes for most other body parts (somatic traits). We examined the allometry of genitalic and somatic morphological traits in males and females of two species of noctuid moths, Spodoptera exigua (Hübner, [1808]) and Helicoverpa armigera (Hübner, [1808]). The relationship between genitalic traits and body size was generally strongly negative‐allometric in males but with no significant differences from 1.00 in females of the two species examined. However, in females, the slope of genital traits was also lower than the slopes for somatic traits. The relationship between somatic traits and the body size indicator was approximately isometric in most cases in males, except in four traits in S. exigua, in which the slopes showed slight negative allometry, and the hind tibia in H. armigera, in which the slope had positive allometry. However, in females, some somatic traits showed isometric and some other showed negative allometry in both species. The coefficients of variation (CV) for all structures in the males were low, not exceeding 10%. Genitalic traits showed significantly lower CV than somatic traits in males. In females, somatic traits showed lower CV than genitalic traits but with no significant difference in the H. armigera. Our observations of strongly negative allometry for genitalic traits in males are consistent with stabilizing selection on genital size and we suggest that male performance in interactions with females is the source of selection on male genital allometry. The difference in the degree of phenotypic variation between genitalic and somatic traits in the two studied species is attributed to the different developmental‐genetic architectures of these traits. Female genitalia showed a similar trend to the males, although the difference between genital and somatic traits was not significant in females. This finding suggests that selection is acting differently on male and female genitalia. Positive allometry of hind tibia in H. armigera may be a result of secondary sexual function.     

Pitfalls in understanding the functional significance of genital allometry

The male genitalia of arthropods consistently show negative static allometry (the genitalia of small males of a species are disproportionally large, and those of large males are disproportionally small). We discuss relations between the ‘one‐size‐fits‐all’ hypothesis to explain this allometry and the regimes of selection that may be acting on genitalia. We focus on the contrasts between directional vs. stabilizing selection, and natural vs. sexual selection. In addition, we point out some common methodological problems in studies of genital allometry. One‐size‐fits‐all types of arguments for negative allometry imply net stabilizing selection, but the effects of stabilizing selection on allometry will be weaker when the correlation between body size and the trait size is weaker. One‐size‐fits‐all arguments can involve natural as well as sexual selection, and negative allometry can also result from directional selection. Several practical problems make direct tests of whether directional or stabilizing selection is acting difficult. One common methodological problem in previous studies has been concentration on absolute rather than relative values of the allometric slopes of genitalia; there are many reasons to doubt the usefulness of comparing absolute slopes with the usual reference value of 1.00. Another problem has been the failure to recognize that size and shape are independent traits of genitalia; rapid divergence in the shape of genitalia is thus not paradoxical with respect to the reduced variation in their sizes that is commonly associated with negative allometric scaling.     

ALLOMETRIC CONSTRAINTS AND THE EVOLUTION OF ALLOMETRY

Morphological traits often covary within and among species according to simple power laws referred to as allometry. Such allometric relationships may result from common growth regulation, and this has given rise to the hypothesis that allometric exponents may have low evolvability and constrain trait evolution. We formalize hypotheses for how allometry may constrain morphological trait evolution across taxa, and test these using more than 300 empirical estimates of static (within‐species) allometric relations of animal morphological traits. Although we find evidence for evolutionary changes in allometric parameters on million‐year, cross‐species time scales, there is limited evidence for microevolutionary changes in allometric slopes. Accordingly, we find that static allometries often predict evolutionary allometries on the subspecies level, but less so across species. Although there is a large body of work on allometry in a broad sense that includes all kinds of morphological trait–size relationships, we found relatively little information about the evolution of allometry in the narrow sense of a power relationship. Despite the many claims of microevolutionary changes of static allometries in the literature, hardly any of these apply to narrow‐sense allometry, and we argue that the hypothesis of strongly constrained static allometric slopes remains viable.     

Variation in the ontogenetic allometry of horn length in bovids along a body mass continuum

Allometric relationships describe the proportional covariation between morphological, physiological, or life‐history traits and the size of the organisms. Evolutionary allometries estimated among species are expected to result from species differences in ontogenetic allometry, but it remains uncertain whether ontogenetic allometric parameters and particularly the ontogenetic slope can evolve. In bovids, the nonlinear evolutionary allometry between horn length and body mass in males suggests systematic changes in ontogenetic allometry with increasing species body mass. To test this hypothesis, we estimated ontogenetic allometry between horn length and body mass in males and females of 19 bovid species ranging from ca. 5 to 700 kg. Ontogenetic allometry changed systematically with species body mass from steep ontogenetic allometries over a short period of horn growth in small species to shallow allometry with the growth period of horns matching the period of body mass increase in the largest species. Intermediate species displayed steep allometry over long period of horn growth. Females tended to display shallower ontogenetic allometry with longer horn growth compared to males, but these differences were weak and highly variable. These findings show that ontogenetic allometric slope evolved across species possibly as a response to size‐related changes in the selection pressures acting on horn length and body mass.     

Bat genitalia: allometry, variation and good genes

Male genitalia are typically highly variable across species, for which sexual selection is thought to be responsible. Sexually selected traits characteristically show positive allometry and high phenotypic variation, although genitalia seem to be typified by negative allometry due to stabilizing selection. Additionally, while sexual selection appears to be the primary force responsible for genital evolution, the precise mechanism is unclear, but good-genes selection could be involved. If so, male genital variation should correlate with some male quality measure(s). We investigated the allometry of male Nyctalus noctula genitalia and investigated associations between genital size and three phenotypic measures of male quality (body size, relative body mass, and fluctuating asymmetry (FA)). We found that the penis exhibited positive allometry and high phenotypic variation, and was positively associated with male body size and relative body mass, but not with FA. This pattern is more typical of sexually selected display traits, contrasting with general patterns of genital allometry. The baculum was negatively allometric and was not associated with any quality measure. Our results suggest that the N. noctula penis is under directional sexual selection and is a reliable indicator of male phenotypic quality.  © 2004 The Linnean Society of London, Biological Journal of the Linnean Society , 2004, 83 , 497–507.     

Does allometry account for shape variability in <Emphasis Type="Italic">Ephedrus persicae</Emphasis> Froggatt (Hymenoptera: Braconidae: Aphidiinae) parasitic wasps?

We analysed linear measurements on various parts of the body and the configuration of 11 landmarks on the wing in a large sample of Ephedrus persicae that had emerged from 13 aphid host species, to assess whether static allometry (a measure of the scaling relationship between traits in a population of individuals at the same ontogenetic stage) accounts for variation in body shape. The analysed specimens came from several localities in Europe, Asia Minor, Japan and South America, and cover a large portion of the distribution area of E. persicae. We found that allometry accounts for variation in body shape among different biotypes within the E. persicae group. The allometric slopes for head size (HD), petiolus width (PETW), mesoscutum width (MSC), and ovipositor sheath length (OVPL) diverged significantly among biotypes, indicating biotype-specific allometries. The analysis of allometric variation in wing shape showed that the pattern and direction of allometric changes also differed among individuals that had emerged from different hosts. Our results (observed divergences in the directions of allometric slopes of particular morphometric traits and wing shape) suggest that allometric relations within E. persicae are not conserved, so that allometry itself changes, evolving differently in aphid parasitoids that emerge from different hosts.     

Baculum variation and allometry in the muskrat (Ondatra zibethicus): a case for sexual selection

Sexual selection is a powerful force that influences the evolution of a variety of traits associated with female mate choice and male–male competition. Although other factors have been implicated, sexual selection may be particularly important in the evolution of the genitalia. Traits under sexual selection typically have high phenotypic variance and positive allometry relative to non-sexual traits. Here, we test the hypothesis that the baculum (os penis) of the muskrat (Ondatra zibethicus) is under sexual selection by examining phenotypic variance and allometry relative to non-sexual traits. Muskrats were sampled from Ontario, Canada, and a variety of traits measured. Measurements included baculum length and width, and three non-sexual traits (skull length, skull width, hind foot length). We used coefficient of variation (CV) and allometric slopes calculated using reduced major axis regression to test our hypotheses. Baculum traits had significantly higher CV’s relative to non-sexual traits. Baculum traits also showed positive allometry, whereas all non-sexual traits had negative allometric relationships. In addition, baculum width had higher CV’s and steeper allometric slopes than baculum length, indicating that, in muskrat, baculum width may be more influenced by sexual selection than baculum length. Positive allometry of the baculum is consistent with other examples of mammalian genitalia, but contrasts with negative allometry found in many insects. Other examples of positive allometry and high phenotypic variance of the baculum have suggested that females may use the baculum as an indicator of male quality. “Good genes” indicator traits may be particularly important in species that mate in an environmental context that prohibits female assessment of male quality. Muskrats mate aquatically, and thus females may be unable to properly assess males prior to copulation.     

Sexual selection and the rodent baculum: an intraspecific study in the house mouse (<Emphasis Type="Italic">Mus musculus domesticus</Emphasis>)

The rapid divergence of genitalia is a pervasive trend in animal evolution, thought to be due to the action of sexual selection. To test predictions from the sexual selection hypothesis, we here report data on the allometry, variation, plasticity and condition dependence of baculum morphology in the house mouse (Mus musculus domesticus). We find that that baculum size: (a) exhibits no consistent pattern of allometric scaling (baculum size being in most cases unrelated to body size), (b) exhibits low to moderate levels of phenotypic variation, (c) does not exhibit phenotypic plasticity in response to differences in perceived levels of sexual competition and (d) exhibits limited evidence of condition dependence. These patterns provide only limited evidence in support of the sexual selection hypothesis, and no consistent support for any particular sexual selection mechanism; however, more direct measures of how genital morphology influences male fertilization success are required.     

Sex combs,allometry, and asymmetry in Drosophila

There has been recent debate about the expected allometry of sexually‐selected traits. Although sexually‐selected traits exhibit a diversity of allometric patterns, signalling characters are frequently positively allometric. By contrast, insect genitalia tend to be negatively allometric, although the allometry of nongenital sexually‐selected characters in insects is largely unknown (with some notable exceptions). It has also been suggested that there should be a negative association between the asymmetry and size of bilaterally‐paired, sexually‐selected traits, although this claim is controversial. We assessed the allometry and asymmetry (fluctuating asymmetry, FA) of a nongenital contact–courtship structure, the sex comb, in replicate populations of three species of Drosophila (we also measured wing FA). Sex combs are sexually‐selected characters used to grasp the female's abdomen and genitalia and to spread her wings prior to and during copulation. Although species differed in the size of the sex combs, all combs were positively allometric, and comb allometry did not generally differ significantly between species or populations. Comb and wing asymmetry did vary across species, although not across populations of the same species. However, FA was trait specific and was never negatively associated with trait size. © 2011 The Linnean Society of London, Biological Journal of the Linnean Society, 2011, 103 , 923–934.     

The evolution of condition-dependent sexual dimorphism

Theory suggests that the net benefit of allocating resources to a sexual trait depends both on the strength of sexual selection on that trait and on individual condition. This predicts a tight coevolution between sexual dimorphism and condition dependence and suggests that these patterns of within-sex and between-sex variation may share a common genetic and developmental basis. Although condition-dependent expression of sexual traits is widely documented, the extent of covariation between condition dependence and sexual dimorphism remains poorly known. I investigated the effects of condition (larval diet quality) on multivariate sexual dimorphism in the fly Telostylinus angusticollis (Neriidae). Condition determined the direction of sexual size dimorphism and modulated sexual shape dimorphism by affecting allometric slopes and/or intercepts of sexually homologous traits in both sexes. Although the greatest responses to condition manipulation were observed in male sexual traits, both sexual and nonsexual traits exhibited substantial variation in the nature and magnitude of condition effects. Nonetheless, condition dependence and sexual dimorphism were remarkably congruent: variation in the strength of condition effects on male traits explained more than 90% of the variation in the magnitude of sexual dimorphism, whether quantified in terms of trait size or allometric slope. The genetic mechanisms that give rise to multivariate sexual dimorphism in body shape thus function in a strongly condition-dependent manner in this species, suggesting a common genetic basis for body shape variation within and between sexes.     

Geometric morphometrics and leaf phenotypic plasticity: assessing fluctuating asymmetry and allometry in European white oaks (Quercus)

Because plants are unable to move away from unfavourable habitats and environmental perturbations, leaf phenotypic plasticity facilitates light absorption and gas exchange. Oaks (Quercus spp.) are particularly known for their adaptability and plastic phenotypes, and leaf allometry and developmental instability may represent important mechanisms for their adaptation to environments and evolution. Because of its important role in the adaptation of plant populations to different environments, allometry can be involved in diversifying selection. Developmental instability is related to environmental perturbations and stresses by producing random deviations in structures characterized by bilateral symmetry, such as oak leaves. In addition, developmental instability can also arise from genetic bottlenecks or as a result of hybridization. The splitting of symmetric and asymmetric components of variation and their separate analysis allows the variability in leaf shape traits to be summarized, reducing the variation produced by developmental instability. The geometric morphometric approach is a useful method for the study of leaf asymmetry and allometric patterns. This method provides an important tool for the visualization of shape attributes that characterize species with highly variable leaf phenotypic patterns. In this study, leaf shape and size variability of three white oak species was investigated by means of a two‐dimensional landmark‐based method providing improved knowledge of variance partitioning, species discrimination, fluctuating asymmetry and allometric patterns of variation resulting from the different analyses. © 2015 The Linnean Society of London, Botanical Journal of the Linnean Society, 2015, 179 , 335–348.     

Differential condition dependence among morphological traits inferred from responses to heat stress is predicted by sexual selection theory

Secondary sexual traits that are condition‐dependent are expected to reveal the physiological state and/or genetic quality of individuals, and therefore, should more often be found to be under sexual selection than (1) secondary sexual traits not currently condition‐dependent, and (2) nonsecondary sexual traits. In the present study, we contrasted the degree of condition dependence in three morphological traits of male Drosophila bipectinata: two secondary sexual traits (distinct components of the sex comb), one of which significantly predicts mating success in nature (segment 2), whereas the other does not (segment 1), and a nonsecondary sexual trait (sternopleural bristle number). As predicted, comb segment 2 decreased significantly in size, in response to increasing temperature during development, whereas comb segment 1 and sternopleural bristle number either did not change significantly, or increased with increasing temperature. These results support the hypothesis that condition‐dependence, inferred from stress‐induced reductions in trait expression, engenders a trait to sexual selection. Small‐combed genotypes did not exhibit disproportionate reductions in larva‐to‐adult survivorship and adult body size compared to large‐combed genotypes, suggesting that comb size does not reveal genotypic quality, at least as revealed by sensitivity in body size and juvenile survivorship to thermal stress. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 101 , 566–574.     

A test of Rensch's rule in varanid lizards

In a model group of giant reptiles, we explored the allometric relationships between male and female body size and compared the effects of sexual and fecundity selection, as well as some proximate causes, on macroevolutionary patterns of sexual size dimorphism (SSD). Monitor lizards are a morphologically homogeneous group that has been affected by extreme changes in body size during their evolutionary history, resulting in 14‐fold differences among the body sizes of recent species. Here, we analysed data concerning the maximum and/or mean male and female snout–vent lengths in 42 species of monitor lizard from literary sources and supplemented these data with measurements made in zoos. There was a wide scale of SSD from nearly monomorphic species belonging mostly to the subgenus Odatria and Prasinus group of the Euprepriosaurus to apparently male‐larger taxa. The variable best explaining SSD was the body size itself; the larger the species, the higher the SSD. This pattern agrees with the currently discussed Rensch's rule, claiming that the relationship between male and female body size is hyperallometric, i.e. the allometric exponent of this relationship exceeds unity and thus SSD increases with body size in the case of male‐larger taxa. All our estimates of the reduced major axis regression slopes of this relationship ranged from 1.132 to 1.155. These estimates are significantly higher than unity, and thus unequivocally corroborate the validity of Rensch's rule in this reptilian group. In spite of our expectation that the variation in SSD can be alternatively explained by variables reflecting the strength of sexual selection (presence of male combat), fecundity selection (e.g. clutch size and mass) and/or proximate ecological factors (habitat type), none of these variables had consistent effects on SSD, especially when the data were adjusted to phylogenetic dependence and/or body size. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 100 , 293–306.     

Phenotypic and genetic variation in male genitalia in the seedbug, Lygaeus equestris (Heteroptera)

Male genitalia evolve through sexual selection and, in insects, tend to show negative static allometry, low phenotypic variation, and are usually relatively small. Much less is known about the genetic variation and heritability of male genitalia. Additionally, in instances where the intromittent organ is greatly elongated, it is unclear whether typical patterns of genital scaling and variation also apply. In the present study, we investigated the allometry, variation, and heritability of male genital length in the seedbug, Lygaeus equestris , a species with a greatly elongated intromittent organ (i.e. almost as long as male body size). We found that genital length was negatively allometric, in spite of its great length, and was no more variable than nongenital traits. Additionally, genital length was significantly heritable and had considerable evolvability.  © 2009 The Linnean Society of London, Biological Journal of the Linnean Society , 2009, 98 , 400–405.     

The allometric pattern of sexually size dimorphic feather ornaments and factors affecting allometry

The static allometry of secondary sexual characters is currently subject to debate. While some studies suggest an almost universal positive allometry for such traits, but isometry or negative allometry for nonornamental traits, other studies maintain that any kind of allometric pattern is possible. Therefore, we investigated the allometry of sexually size dimorphic feather ornaments in 67 species of birds. We also studied the allometry of female feathers homologous to male ornaments (female ornaments in the following) and ordinary nonsexual traits. Allometries were estimated as reduced major axis slopes of trait length on tarsus length. Ornamental feathers showed positive allometric slopes in both sexes, although that was not a peculiarity for ornamental feathers, because nonsexual tail feathers also showed positive allometry. Migration distance (in males) and relative size of the tail ornament (in females) tended to be negatively related to the allometric slope of tail feather ornaments, although these results were not conclusive. Finally, we found an association between mating system and allometry of tail feather ornaments, with species with more intense sexual selection showing a smaller degree of allometry of tail ornaments. This study is consistent with theoretical models that predict no specific kind of allometric pattern for sexual and nonsexual characters.     

Life-history variation and allometry for sexual size dimorphism in Pacific salmon and trout

Allometry for sexual size dimorphism (SSD) is common in animals, but how different evolutionary processes interact to determine allometry remains unclear. Among related species SSD (male : female) typically increases with average body size, resulting in slopes of less than 1 when female size is regressed on male size: an allometric relationship formalized as 'Rensch's rule' . Empirical studies show that taxa with male-biased SSD are more likely to satisfy Rensch's rule and that a taxon's mean SSD is negatively correlated with allometric slope, implicating sexual selection on male size as an important mechanism promoting allometry for SSD. I use body length (and life-history) data from 628 (259) populations of seven species of anadromous Pacific salmon and trout (Oncorhynchus spp.) to show that in this genus life-history variation appears to regulate patterns of allometry both within and between species. Although all seven species have intraspecific allometric slopes of less than 1, contrary to expectation slope is unrelated to species' mean SSD, but is instead negatively correlated with two life-history variables: the species' mean marine age and variation in marine age. Second, because differences in marine age among species render SSD and body size uncorrelated, the interspecific slope is isometric. Together, these results provide an example of how evolutionary divergence in life history among related species can affect patterns of allometry for SSD across taxonomic scales.