Characteristic features of the heterologous functional synthesis in Escherichia coli of a 2[4Fe-4S] ferredoxin

Different strategies have been used to express synthetic genes all encoding Clostridium pasteurianum 2[4Fe-4S] ferredoxin (Fd) in Escherichia coli. The polypeptide can be produced as the C-terminal addition to a hybrid Cro::Protein A fusion protein lacking the metallic centers. The incorporation of the [4Fe-4S] clusters into the cleaved apoFd cannot be carried out in the same conditions as those affording holoFd from purified C. pasteurianum apoFd. In contrast, fully functional Fds can be produced from non-fused synthetic genes under the dependence of strong promoters. The yields of recombinant Fd, although sufficient to purify significant quantities of protein, are limited by the very short half-life of the 2[4Fe-4S] Fd in E. coli, irrespective of the expression system used. These features are characteristic of 2[4Fe-4S] Fds when compared with the far more stable recombinant rubredoxin, and probably other small iron-sulfur proteins which have already been produced in high yields. The reasons for the high turnover of 2[4Fe-4S] Fds are discussed.     

A totally synthetic histidine-2 ferredoxin: thermal stability and redox properties.

The entire polypeptide of Clostridium pasteurianum ferredoxin (Fd) with a site-substituted tyrosine-2----histidine-2 was synthesized using standard t-Boc procedures, reconstituted to the 2[4Fe-4S] holoprotein, and compared to synthetic C. pasteurianum and native Fds. Although histidine-2 is commonly found in thermostable clostridial Fds, the histidine-2 substitution into synthetic C. pasteurianum Fd did not significantly increase its thermostability. The reduction potential of synthetic histidine-2 Fd was -343 and -394 mV at pH 6.4 and 8.7, respectively, versus standard hydrogen electrode. Similarly, Clostridium thermosaccharolyticum Fd which naturally contains histidine-2 was previously determined to have a pH-dependent reduction potential [Smith, E.T., & Feinberg, B.A. (1990) J. Biol. Chem. 265, 14371-14376]. An electrostatic model was used to calculate the observed change in reduction potential with pH for a homologous ferredoxin with a known X-ray crystal structure containing a hypothetical histidine-2. In contrast, the reduction potential of both native C. pasteurianum Fd and synthetic Fd with the C. pasteurianum sequence was -400 mV versus standard hydrogen electrode and was pH-independent [Smith, E.T., Feinberg, B.A., Richards, J.H., & Tomich, J.M. (1991) J. Am. Chem. Soc. 113, 688-689]. On the basis of the above results, we conclude that the observed pH-dependent reduction potential for both synthetic and native ferredoxins that contain histidine-2 is attributable to the electrostatic interaction between histidine-2 and iron-sulfur cluster II which is approximately 6 A away.     

Iron-sulphur cluster composition and redox properties of two ferredoxins from Desulfovibrio desulfuricans Norway strain

Two ferredoxins from Desulfovibrio desulfuricans, Norway Strain, were investigated by EPR spectroscopy. Ferredoxin I appears to be a conventional [4Fe-4S]2+;1+ ferredoxin, with a midpoint reduction potential of -374 mV at pH 8. Ferredoxin II when reduced, at first showed a more complex spectrum, indicating an interaction between two [4Fe-4S] clusters, and probably, has two clusters per protein subunit. Upon reductive titration ferredoxin II changed to give a spectrum in which no intercluster interaction was seen. The midpoint potentials of the native and modified ferredoxin at pH 8 were estimated to be -500 and -440 mV, respectively.     

Characterization of the recombinant Clostridium pasteurianum ferredoxin and comparison of its properties with those of the native protein

Ferredoxins (Fds) constitute an important class of nonheme iron-sulfur proteins. One of the most studied Fds is the [8Fe-8S] Fd from Clostridium pasteurianum. The gene for this Fd has previously been cloned and sequenced. We report the expression of this Fd in Escherichia coli, and the characterization and comparison of this recombinant protein to the native Fd. We have found that the purified recombinant protein has the same enzymatic, redox, magnetic and electronic properties as the native Fd isolated from C. pasteurianum, which indicates that the two [4Fe-4S] clusters present in the Fd were correctly formed in E. coli.     

Primary structure of the two (4 Fe-4 S) clusters ferredoxin from Desulfovibrio desulfuricans (strain Norway 4)

The primary structure of a ferredoxin isolated from D. desulfuricans Norway strain, which we called ferredoxin II (Fd II) has been elucidated. This ferredoxin is a dimer constituted of two identical subunits of molecular weight 6000. In ferredoxin II two (4 Fe-4 S) centers are present per subunit instead of one (Fe-S) center as is the case for the other ferredoxins isolated from Desulfovibrio and for Fd I from the same organism. The comparison of amino-acid sequences shows that ferredoxin II presents more homologies with clostridial type ferredoxin than with the ferredoxins from D. gigas and D. africanus.     

Iron-sulphur cluster composition and redox properties of two ferredoxins from Desulfovibrio desulfuricans Norway strain

Two ferredoxins from Desulfovibrio desulfuricans, Norway Strain, were investigated by EPR spectroscopy. Ferredoxin I appears to be a conventional [4Fe-4S]^2+;1+ ferredoxin, with a midpoint reduction potential of ?374 mV at pH 8. Ferredoxin II when reduced, at first showed a more complex spectrum, indicating an interaction between two [4Fe-4S] clusters, and probably, has two clusters per protein subunit. Upon reductive titration ferredoxin II changed to give a spectrum in which no intercluster interaction was seen. The midpoint potentials of the native and modified ferredoxin at pH 8 were estimated to be ?500 and ?440 mV, respectively.     

Characterization of the selenium-substituted 2 [4Fe-4Se] ferredoxin from Clostridium pasteurianum

The sulfur atoms of the two [4Fe-4S] clusters present in the ferredoxin from Clostridium pasteurianum have been replaced by selenium. The substitution is readily carried out by incubating the apoferredoxin with excess amounts of Fe3+, selenite, and dithiothreitol under anaerobic conditions. The UV-visible absorption spectrum of the Se-substituted ferredoxin, the core extrusion of its active sites, and analyses of its iron and selenium contents show that it contains two [4Fe-4Se] clusters. The Se-substituted ferredoxin is considerably less resistant to oxygen or to acidic and alkaline pH than the native ferredoxin: the half-lives of the former are 20-500 times shorter than those of the latter. The native ferredoxin and the Se-substituted ferredoxin display similar kinetic properties when used as electron donors to the hydrogenase from C. pasteurianum. It is of note, however, that the Km and Vmax values are lower for the 2[4Fe-4Se] ferredoxin than for the 2[4Fe-4S] ferredoxin. Reductive and oxidative titrations with dithionite and with thionine, respectively, show that both ferredoxins are two-electron carriers. The redox potentials of the ferredoxins have been measured by equilibrating them with the H2/H+ couple via hydrogenase: values of -423 and -417 mV have been found for the 2[4Fe-4S] ferredoxin and 2[4Fe-4Se] ferredoxin, respectively. Ferredoxins containing both chalcogenides in their [4Fe-4X] (X = S, Se) clusters have been prepared by reconstitution reactions involving mixtures of sulfide and selenide: the latter experiments show that sulfide and selenide are equally reactive in the incorporation of [4Fe-4X] (X = S, Se) sites into ferredoxin. The present report, together with former studies, establishes the general feasibility of the Se/S substitution in [2Fe-2S] and in [4Fe-4S] clusters of proteins and of synthetic analogues.     

Purification and characterization of a 7Fe ferredoxin from a thermophilic hydrogen-oxidizing bacterium, Bacillus schlegelii.

A ferredoxin (Fd) was purified from a thermophilic hydrogen-oxidizing bacterium, Bacillus schlegelii. This ferredoxin was a monomer with apparent molecular weight of 13,000 and contained 7 mol Fe/mol ferredoxin. The oxidized ferredoxin showed the characteristic EPR spectrum for [3Fe-4S]1+ (1.2 spin/mol Fd). This signal disappeared upon reduction with dithionite and new signals due to [3Fe-4S]0 and [4Fe-4S]1+ (0.7 spin/mol Fd) appeared. The quantitation of EPR signals and the iron content reveal that B. schlegelii ferredoxin contains one [3Fe-4S]1+/0 and one [4Fe-4S]2+/1+ cluster. The ferredoxin has the characteristic distribution of cysteines (-Cys8-X7-Cys16-X3-Cys20-Pro-) for 7Fe ferredoxins in the N-terminus.     

Antioxidant activity of sugar-lysine Maillard reaction products in cell free and cell culture systems

The presence of a linear [3Fe-4S] cluster in a protein was first observed in beef-heart aconitase. Here, we report the formation of linear [3Fe-4S] clusters upon guanidine hydrochloride (GuHCl)-induced unfolding of Aquifex aeolicus [2Fe-2S] ferredoxins (Fd) (AaeFd1, AaeFd4, and AaeFd5) at alkaline conditions (pH 10, 20 degrees C). We find the mechanism of linear [3Fe-4S] cluster formation to depend critically on the speed of polypeptide unfolding. In similarity to seven-iron Fds, polypeptide unfolding determines the rate by which linear [3Fe-4S] clusters form in AaeFd4 and AaeFd5. In contrast, in a disulfide-lacking variant of AaeFd1, which unfolds faster than AaeFd4 and AaeFd5, the polypeptides unfold first and the majority of clusters decompose. Next, unfolded polypeptides retaining intact clusters scavenge iron and sulfur to form linear [3Fe-4S] clusters in a bimolecular reaction. Wild-type AaeFd1 unfolds slower than the speed of linear-cluster decomposition, and the linear species is never populated. Linear [3Fe-4S] clusters may be intermediates during folding of iron-sulfur proteins.     

Characterisation of oxidised 7Fe dicluster ferredoxins with NMR spectroscopy

Dicluster ferredoxins (Fds) from Sulfolobus acidocaldarius and Desulfovibrio africanus (FdIII) have been studied using 1H NMR. Both wild-type proteins contain a [3Fe-4S]+/0 and a [4Fe-4S]2+/+ cluster as isolated. The [4Fe-4S]2+/+ cluster (cluster II) is bound by cysteine residues arranged in a classic ferredoxin motif: CysI-(Xaa)2-CysII-(Xaa)2-CysIII-(Xaa)n-CysIV-Pro , whilst the binding motif of the [3Fe-4S]+/0 cluster (cluster I) has a non-ligating aspartic acid (Asp14) at position II, i.e. CysI-(Xaa)2-Asp-(Xaa)2-CysIII. D. africanus FdIII undergoes facile cluster transformation from the 7Fe form to the 8Fe form, but S. acidocaldarius Fd does not. Many factors determine the propensity of a cluster to undergo interconversion, including the presence, and correct orientation, of a suitable ligand. We have investigated this using 1H NMR by introducing a potential fourth ligand into the binding motif of cluster I of D. africanus FdIII. Asp14 has been mutated to cysteine (D14C), glutamic acid (D14E) and histidine (D14H). Cluster incorporation was performed in vitro. The cluster types present were identified from the chemical shift patterns and temperature-dependent behaviour of the hyperfine-shifted resonances. Factors influencing cluster ligation and cluster interconversion, in vitro, are discussed. Furthermore, the data have established that the residue at position II in the cluster binding motif of cluster I is influential in determining the chemical shift pattern observed for a [3Fe-4S]+ cluster when a short/symmetric binding motif is present. Based on this, a series of rules for characterising the 1H NMR chemical shifts of mono- and di-cluster [3Fe-4S]+ cluster-containing ferredoxins is given.     

Structural basis for the thermostability of ferredoxin from the cyanobacterium Mastigocladus laminosus

Plant-type ferredoxins (Fds) carry a single [2Fe-2S] cluster and serve as electron acceptors of photosystem I (PSI). The ferredoxin from the thermophilic cyanobacterium Mastigocladus laminosus displays optimal activity at 65 degrees C. In order to reveal the molecular factors that confer thermostability, the crystal structure of M.laminosus Fd (mFd) was determined to 1.25 A resolution and subsequently analyzed in comparison with four similar plant-type mesophilic ferredoxins. The topologies of the plant-type ferredoxins are similar, yet two structural determinants were identified that may account for differences in thermostability, a salt bridge network in the C-terminal region, and the flexible L1,2 loop that increases hydrophobic accessible surface area. These conclusions were verified by three mutations, i.e. substitution of L1,2 into a rigid beta-turn ((Delta)L1,2) and two point mutations (E90S and E96S) that disrupt the salt bridge network at the C-terminal region. All three mutants have shown reduced electron transfer (ET) capabilities and [2Fe-2S] stability at high temperatures in comparison to the wild-type mFd. The results have also provided new insights into the involvement of the L1,2 loop in the Fd interactions with its electron donor, the PSI complex.     

Characterization and cloning of an extremely thermostable, Pyrococcus furiosus-type 4Fe ferredoxin from Thermococcus profundus.

An extremely thermostable [4Fe-4S] ferredoxin was isolated under anaerobic conditions from a hyperthermophilic archaeon Thermococcus profundus, and the ferredoxin gene was cloned and sequenced. The nucleotide sequence of the ferredoxin gene shows the ferredoxin to comprise 62 amino acid residues with a sequence similar to those of many bacterial and archaeal 4Fe (3Fe) ferredoxins. The unusual Fe-S cluster type, which was identified in the resonance Raman and EPR spectra, has three cysteines and one aspartate as the cluster ligands, as in the Pyrococcus furiosus 4Fe ferredoxin. Under aerobic conditions, a ferredoxin was purified that contains a [3Fe-4S] cluster as the major Fe-S cluster and a small amount of the [4Fe-4S] cluster. Its N-terminal amino acid sequence is the same as that of the anaerobically-purified ferredoxin up to the 26th residue. These results indicate that the 4Fe ferredoxin was degraded to 3Fe ferredoxin during aerobic purification. The aerobically-purified ferredoxin was reversibly converted back to the [4Fe-4S] ferredoxin by the addition of ferrous ions under reducing conditions. The anaerobically-purified [4Fe-4S] ferredoxin is quite stable; little degradtion was observed over 20 h at 100 degrees C, while the half-life of the aerobically-purified ferredoxin is 10 h at 100 degrees C. Both the anaerobically- and aerobically-purified ferredoxins were found to function as electron acceptors for the pyruvate-ferredoxin oxidoreductase purified from the same archaeon.     

Does ferredoxin I (Azotobacter) represent a novel class of DNA-binding proteins that regulate gene expression in response to cellular iron(II)?

Azotobacter vinelandii (Av) and chroococcum (Ac) ferredoxin I contain [3Fe-4S]1 + 0 and [4Fe-4S]2+1+ clusters, when isolated aerobically, which undergo one-electron redox cycles at potentials of -460 +/- 10 mV (vs SHE) at pH 8.3 and -645 +/- 10 mV, respectively. The X-ray structure of Fd I (Av) reveals that the N-terminal half of the polypeptide folds as a sandwich of beta-strands which enclose the iron-sulphur clusters. The C-terminal sequence contains an amphiphilic alpha-helix of four turns which lies on the surface of the beta-barrel. Fd I (Av) controls expression of an unknown protein of Mr approximately 18,000. Fd I (Ac) will complex iron(II) avidly above pH approximately 8.0 only when the [3Fe-4S] cluster is reduced and provided that cellular nucleic acid is bound. Fd I (Ac) rigorously purified from nucleic acid does not undergo iron(II) uptake. These facts, together with recent evidence that the interconversion process [3Fe-4S]0 + Fe2+----[4Fe-4S]2+ in the iron-responsive element binding protein (IRE-BP) of eukaryotic cells is controlling protein expression at the level of mRNA [1991, Cell 64, 4771; 1991, Nucleic Acid Res. 19, 1739] leads to the following hypothesis. Fd I is a DNA-binding protein which interacts by single alpha-helix binding in the wide groove of DNA. The binding is regulated by iron(II) levels in the cell. The 7Fe form binds to DNA and represses gene expression. Only the DNA-bound form of the 7Fe Fd I will take up iron(II), not the form free in solution. Iron(II) becomes bound when the [3Fe-4S] cluster is reduced. The 8Fe Fd I thus generated no longer binds DNA and the gene is de-repressed. Sequence comparisons and the crystal structure suggests that the two central turns of the alpha-helix are important elements of the DNA-recognition process and that residues Gln69 and Glu73, which lie on the outer surface of the helix, hydrogen-bond with specific base pairs.     

Crystallographic analysis of the intact metal centres [3Fe-4S](1+/0) and [4Fe-4S](2+/1+) in a Zn(2+) -containing ferredoxin

Detailed structural models of di-cluster seven-iron ferredoxins constitute a valuable resource for folding and stability studies relating the metal cofactors' role in protein stability. The here reported, hemihedric twinned crystal structure at 2.0 A resolution from Acidianus ambivalens ferredoxin, shows an integral 103 residues, physiologically relevant native form composed by a N-terminal extension comprising a His/Asp Zn(2+) site and the ferredoxin (betaalphabeta)(2) core, which harbours intact clusters I and II, a [3Fe-4S](1+/0) and a [4Fe-4S](2+/1+) centres. This is in contrast with the previously available ferredoxin structure from Sulfolofus tokodai, which was obtained from an artificial oxidative conversion with two [3Fe-4S](1+/0) centres and poor definition around cluster II.     

An alternative plant-like cyanobacterial ferredoxin with unprecedented structural and functional properties

Photosynthetic [2Fe-2S] plant-type ferredoxins have a central role in electron transfer between the photosynthetic chain and various metabolic pathways. Several genes are coding for [2Fe2S] ferredoxins in cyanobacteria, with four in the thermophilic cyanobacterium Thermosynechococcus elongatus. The structure and functional properties of the major ferredoxin Fd1 are well known but data on the other ferredoxins are scarce. We report the structural and functional properties of a novel minor type ferredoxin, Fd2 of T. elongatus, homologous to Fed4 from Synechocystis sp. PCC 6803. Remarkably, the midpoint potential of Fd2, Em = −440 mV, is lower than that of Fd1, Em = −372 mV. However, while Fd2 can efficiently react with photosystem I or nitrite reductase, time-resolved spectroscopy shows that Fd2 has a very low capacity to reduce ferredoxin-NADP⁺ oxidoreductase (FNR). These unique Fd2 properties are discussed in relation with its structure, solved at 1.38 Å resolution. The Fd2 structure significantly differs from other known ferredoxins structures in loop 2, N-terminal region, hydrogen bonding networks and surface charge distributions. UV–Vis, EPR, and Mid- and Far-IR data also show that the electronic properties of the [2Fe2S] cluster of Fd2 and its interaction with the protein differ from those of Fd1 both in the oxidized and reduced states. The structural analysis allows to propose that valine in the motif Cys₅₃ValAsnCys₅₆ of Fd2 and the specific orientation of Phe72, explain the electron transfer properties of Fd2. Strikingly, the nature of these residues correlates with different phylogenetic groups of cyanobacterial Fds. With its low redox potential and its discrimination against FNR, Fd2 exhibits a unique capacity to direct efficiently photosynthetic electrons to metabolic pathways not dependent on FNR.     

Crystal structure of the 2[4Fe-4S] ferredoxin from Chromatium vinosum: evolutionary and mechanistic inferences for [3/4Fe-4S] ferredoxins.

The crystal structure of the 2[4Fe-4S] ferredoxin from Chromatium vinosum has been solved by molecular replacement using data recorded with synchrotron radiation. The crystals were hexagonal prisms that showed a strong tendency to develop into long tubes. The hexagonal prisms diffracted to 2.1 A resolution at best, and a structural model for C. vinosum ferredoxin has been built with a final R of 19.2%. The N-terminal domain coordinates the two [4Fe-4S] clusters in a fold that is almost identical to that of other known ferredoxins. However, the structure has two unique features. One is a six-residue insertion between two ligands of one cluster forming a two-turn external loop; this short loop changes the conformation of the Cys 40 ligand compared to other ferredoxins and hampers the building of one NH...S H-bond to one of the inorganic sulfurs. The other remarkable structural element is a 3.5-turn alpha-helix at the C-terminus that covers one side of the same cluster and is linked to the cluster-binding domain by a six-residue external chain segment. The charge distribution is highly asymmetric over the molecule. The structure of C. vinosum ferredoxin strongly suggests divergent evolution for bacterial [3/4Fe-4S] ferredoxins from a common ancestral cluster-binding core. The unexpected slow intramolecular electron transfer rate between the clusters in C. vinosum ferredoxin, compared to other similar proteins, may be attributed to the unusual electronic properties of one of the clusters arising from localized changes in its vicinity rather than to a global structural rearrangement.     

A four-iron, four-sulfide ferredoxin with high thermostability from Clostridium thermoaceticum.

A ferredoxin containing only one [Fe4S4] cluster was purified from Clostridium thermoaceticum. It has a molecular weight of about 7,300, a partial specific volume of 0.67, and an isoelectric point of 3.25. Its absorption spectrum has two maxima at 390 nm (epsilon = 16.8 X 10(3)M-1cm-1) and at 280 nm (epsilon = 24.2 X 10(3)M-1cm-1). The absorption at 390 nm is almost half that of other clostridial ferredoxins, which have two [Fe4S4] clusters, and is similar to other ferredoxins with only one [Fe4S4] cluster. The ferredoxin had high thermal stability and retained over 50% of its activity after treatment at 80 degrees C. It functions in the transfer of electrons from pyruvate to nicotinamide adenine dinucleotide phosphate (NADP), which indicates the presence of pyruvate:ferredoxin oxidoreductase and reduced ferredoxin-NADP reductase in C, thermoaceticum. NADPH is used in the synthesis of acetate from CO2 in this organism.     

Two distinct ferredoxins from Rhodobacter capsulatus: complete amino acid sequences and molecular evolution

Two distinct ferredoxins were purified from Rhodobacter capsulatus SB1003. Their complete amino acid sequences were determined by a combination of protease digestion, BrCN cleavage and Edman degradation. Ferredoxins I and II were composed of 64 and 111 amino acids, respectively, with molecular weights of 6,728 and 12,549 excluding iron and sulfur atoms. Both contained two Cys clusters in their amino acid sequences. The first cluster of ferredoxin I and the second cluster of ferredoxin II had a sequence, CxxCxxCxxxCP, in common with the ferredoxins found in Clostridia. The second cluster of ferredoxin I had a sequence, CxxCxxxxxxxxCxxxCM, with extra amino acids between the second and third Cys, which has been reported for other photosynthetic bacterial ferredoxins and putative ferredoxins (nif-gene products) from nitrogen-fixing bacteria, and with a unique occurrence of Met. The first cluster of ferredoxin II had a CxxCxxxxCxxxCP sequence, with two additional amino acids between the second and third Cys, a characteristics feature of Azotobacter-[3Fe-4S] [4Fe-4S]-ferredoxin. Ferredoxin II was also similar to Azotobacter-type ferredoxins with an extended carboxyl (C-) terminal sequence compared to the common Clostridium-type. The evolutionary relationship of the two together with a putative one recently found to be encoded in nifENXQ region in this bacterium [Moreno-Vivian et al. (1989) J. Bacteriol. 171, 2591-2598] is discussed.     

Spectroscopic investigation of selective cluster conversion of archaeal zinc-containing ferredoxin from Sulfolobus sp. strain 7

Archaeal zinc-containing ferredoxin from Sulfolobus sp. strain 7 contains one [3Fe-4S] cluster (cluster I), one [4Fe-4S] cluster (cluster II), and one isolated zinc center. Oxidative degradation of this ferredoxin led to the formation of a stable intermediate with 1 zinc and approximately 6 iron atoms. The metal centers of this intermediate were analyzed by electron paramagnetic resonance (EPR), low temperature resonance Raman, x-ray absorption, and (1)H NMR spectroscopies. The spectroscopic data suggest that (i) cluster II was selectively converted to a cubane [3Fe-4S](1+) cluster in the intermediate, without forming a stable radical species, and that (ii) the local metric environments of cluster I and the isolated zinc site did not change significantly in the intermediate. It is concluded that the initial step of oxidative degradation of the archaeal zinc-containing ferredoxin is selective conversion of cluster II, generating a novel intermediate containing two [3Fe-4S] clusters and an isolated zinc center. At this stage, significant structural rearrangement of the protein does not occur. We propose a new scheme for oxidative degradation of dicluster ferredoxins in which each cluster converts in a stepwise manner, prior to apoprotein formation, and discuss its structural and evolutionary implications.