Determination of the disulfide bond pairings in human tissue factor pathway inhibitor purified fromEscherichia coli

The disulfide bond assignments of human alanyl tissue factor pathway inhibitor purified fromEscherichia coli have been determined. This inhibitor of the extrinsic blood coagulation pathway possesses three Kunitz-type inhibitor domains, each containing three disulfide bonds. The disulfide bond pairings in domains 1 and 3 were determined by amino acid sequencing and mass spectrometry of peptides derived from a thermolysin digest. However, thermolysin digestion did not cleave any peptide bonds within domain 2. The disulfide bond pairings in domain 2 were determined by isolating it from the thermolysin treatment and subsequently cleaving it with pepsin and trypsin into peptides which yielded the three disulfide bond pairings in this domain. These results demonstrate that the disulfide pairings in each of the three domains of human tissue factor pathway inhibitor purified fromEscherichia coli are homologous to each other and also to those in bovine pancreatic trypsin inhibitor.     

Determination of the disulfide bond pairings in bovine transforming growth factor-alpha

A rapid method for determining the three disulfide bond pairings in bovine transforming growth factor-alpha (bTGF-alpha) was developed by digesting bTGF-alpha with thermolysin followed by separation of the generated peptides by reversed-phase HPLC. The disulfide-bonded peptides were identified by amino acid sequencing and fast atom bombardment mass spectrometry. The disulfide bond pairings in bTGF-alpha were determined to be homologous to those in the human and mouse TGF-alpha molecules. A species of low bioactivity isolated from the folding/oxidation mixture of chemically synthesized bTGF-alpha was demonstrated to contain two incorrect disulfide bonds. These results indicate that mispairing of disulfide bonds in bTGF-alpha significantly reduces the activity of this molecule.     

The position of the disulfide bonds in human plasma alpha 2 HS-glycoprotein and the repeating double disulfide bonds in the domain structure

The positions of the inter- and intra-chain disulfide bonds of human plasma alpha 2 HS-glycoprotein were determined. alpha 2 HS-glycoprotein was digested with acid proteinase and then with thermolysin. The disulfide bonds containing peptides were separated by reversed-phase HPLC and detected by SBD-F (7-fluorobenzo-2-oxa-1,3-diasole-4-sulfonic acid ammonium salt) method. One inter-disulfide bond containing peptide and five intra-disulfide bond containing peptides (A-chain) were purified and identified as Cys-18 (B-chain)--Cys-14 (A-chain), Cys-71--Cys-82, Cys-96--Cys-114, Cys-128--Cys-131, Cys-190--Cys-201 and Cys-212--Cys-229, respectively. The location of the intra-disulfide bonds revealed that the A-chain of alpha 2 HS-glycoprotein is composed of three domains. Two domains were shown to possess intramolecular homology judging from the total chain length of the domains, size of the loops formed by the S--S bonds, the location of two disulfide loops near the C-terminal end of domains A and B, the distance between two S--S bonds of each domain, the amino acid sequence homology between these two domains (22.6%), number of amino acid residues between the second S--S loops and the end of domains A and B, and the positions of the ordered structures.     

Isolation and characterization of the insecticidal,two-domain toxin LaIT3 from the Liocheles australasiae scorpion venom

ABSTRACT

A novel insecticidal peptide (LaIT3) was isolated from the Liocheles australasiae venom. The primary structure of LaIT3 was determined by a combination of Edman degradation and MS/MS de novo sequencing analysis. Discrimination between Leu and Ile in MS/MS analysis was achieved based on the difference in side chain fragmentation assisted by chemical derivatization. LaIT3 was determined to be an 84-residue peptide with three intrachain disulfide bonds. The sequence similarity search revealed that LaIT3 belongs to the scorpine-like peptides consisting of two structural domains: an N-terminal α-helical domain and a C-terminal cystine-stabilized domain. As observed for most of the scorpine-like peptides, LaIT3 showed significant antibacterial activity against Escherichia coli, which is likely to be caused by its membrane-disrupting property.     

Assignment of the three disulfide bonds in ShK toxin: A potent potassium channel inhibitor from the sea anemone Stichodactyla helianthus

Summary ShK toxin, a 35-residue peptide isolated from the Caribbean sea anemone Stichodactyla helianthus, is a potent inhibitor of the Kv 1.3 potassium channel in lymphocytes. The natural toxin contains three disulfide bonds. The disulfide pairings of the synthetic ShK toxin were elucidated as a prerequisite for studies on its structure-function relationships. The toxin was fragmented at pH 6.5 using either thermolysin or a mixture of trypsin and chymotrypsin followed by thermolysin. The fragments were isolated by RP-HPLC and were identified by sequence analysis and MALDI-TOF mass spectrometry. The three disulfides were unambiguously identified in either proteolytic digest: Cys³ to Cys³⁵, Cys¹² to Cys²⁸ and Cys¹⁷ to Cys³². The Cys³-Cys³⁵ disulfide, linking the amino- and carboxyl-termini, defines the characteristic cyclic structure of the molecule. A similar disulfide pairing motif is found in the snake venom-derived potassium channel blocker dendrotoxin and the mammalian antibiotic peptide defensins.     

Determination and Reoxidation of the Disulfide Bridges of a Squash-Type Trypsin Inhibitor from Sechium edule Seeds

The determination of the disulfide pairings of SETI-II, a trypsin inhibitor isolated from Sechium edule, is described herein. The inhibitor contains 31 amino acid residues per mol, 6 of which are cysteine. Forty-five nmol (160 microg) of SETI-II was hydrolyzed with 20 microg thermolysin for 48 hr at 45 degrees C, and peptides were separated by reverse phase high performance liquid chromatography (RP-HPLC). The major products were identified by amino acid composition, Edman degradation, and on the basis of the sequence of the inhibitor. The disulfide bridge pairings and (yields) are: Cys1-Cys4 (79%), Cys2-Cys5 (21%) and Cys3-Cys6 (43%). When the reduced inhibitor was reoxidized with glutathione reduced form (GSH)/glutathione oxidized form (GSSG) at pH 8.5 for 3 hr, full activity was recovered. These data show that disulfide bridge pairing and oxidation can be determined at nanomole levels and that sensitive and quantitative Edman degradation can eliminate the final time- and material-consuming step of disulfide determinations by eliminating the need to purify and cleave each peptide containing a disulfide bridge.     

The essential cell division protein FtsN contains a critical disulfide bond in a non‐essential domain

Disulfide bonds are found in many proteins associated with the cell wall of Escherichia coli, and for some of these proteins the disulfide bond is critical to their stability and function. One protein found to contain a disulfide bond is the essential cell division protein FtsN, but the importance of this bond to the protein's structural integrity is unclear. While it evidently plays a role in the proper folding of the SPOR domain of FtsN, this domain is non‐essential, suggesting that the disulfide bond might also be dispensable. However, we find that FtsN mutants lacking cysteines give rise to filamentous growth. Furthermore, FtsN protein levels in strains expressing these mutants were significantly lower than in a strain expressing the wild‐type allele, as were FtsN levels in strains incapable of making disulfide bonds (dsb^‐) exposed to anaerobic conditions. These results strongly suggest that FtsN lacking a disulfide bond is unstable, thereby making this disulfide critical for function. We have previously found that dsb^‐ strains fail to grow anaerobically, and the results presented here suggest that this growth defect may be due in part to misfolded FtsN. Thus, proper cell division in E. coli is dependent upon disulfide bond formation.     

Intracellular folding pathway of human chorionic gonadotropin beta subunit.

Few experimental models have been used to investigate how proteins fold inside a cell. Using the formation of disulfide bonds as an index of conformational changes during protein folding, we have developed a unique system to determine the intracellular folding pathway of the beta subunit of human chorionic gonadotropin (hCG). Three folding intermediates of the beta subunit were purified from [35S]cysteine-labeled JAR choriocarcinoma cells by immunoprecipitation and by reverse-phase high performance liquid chromatography (HPLC). To identify unformed disulfide bonds, nonreduced folding intermediates were treated with trypsin to liberate non-disulfide-bound, [35S]cysteine-containing peptides from the disulfide-linked peptides. Released peptides were purified by HPLC and identified by amino acid sequencing. The amount of a peptide that was released indicated the extent of disulfide bond formation involving the cysteine in that peptide. Of the six disulfide bonds in hCG-beta, bonds 34-88 and 38-57 form first. The rate-limiting event of folding involves the formation of the S-S bonds between cysteines 23 and 72 and cysteines 9 and 90. Disulfide bond 93-100, the formation of which appears to be necessary for assembly with the alpha subunit of the hCG heterodimer, forms next. Finally, disulfide bond 26-110 forms after assembly with the alpha subunit, suggesting that completion of folding of the COOH terminus in the beta subunit occurs after assembly with the alpha subunit.     

Purification, characterization and sequence determination of a double-headed trypsin inhibitor peptide from Trichosanthes kirilowii (a Chinese medical herb)

A double-headed trypsin inhibitor peptide was isolated and purified from the root of Trichosanthes kirilowii Maxim (Cucurbitaceae), a Chinese medical herb, by 2.5% trichloroacetic acid and heat treatment followed by affinity chromatography with immobilized trypsin and ion-exchange chromatography. This inhibitor, consisting of 41 amino-acid residues with three pairs of disulfide bonds was sequenced. Two active domains were found to be located at two disulfide loops composed of eight (Pos. 17-24) and nine (Pos. 29-37) amino-acid residues, respectively. It inhibits two molecules of trypsin simultaneously and might be regarded as the smallest double-headed trypsin inhibitor (Mr = 4575) so far known. The chemical modification of the inhibitor with cyclohexandione and citraconic anhydride showed that Arg20-Gly21 and Lys30-Leu31 corresponded to the two reactive sites, respectively. The discovery of the Trichosanthes inhibitor is of importance not only for the study on the structure-function relationship of proteinase inhibitor peptides but also for the search for low molecular mass inhibitors of clinical value among Chinese medical herbs.     

Location of the disulfide bonds in human plasma prekallikrein: the presence of four novel apple domains in the amino-terminal portion of the molecule

The location of 16 of the 18 disulfide bonds in human plasma prekallikrein was determined by amino acid sequence analysis of cystinyl peptides produced by chemical and enzymatic digestions. A unique structure, named the apple domain, was established for each of the four tandem repeats in the amino-terminal portion of the molecule. The apple domains (90 or 91 amino acids) contain 3 highly conserved disulfide bonds linking the first and sixth, second and fifth, and third and fourth half-cystine residues present in each repeat. The fourth tandem repeat contains an extra disulfide bond that forms a second small loop within the apple domain. The carboxyl-terminal portion of plasma prekallikrein containing the catalytic region of the molecule was found to have disulfide bonds located in positions similar to those of other serine proteases.     

Human acid sphingomyelinase.

Human acid sphingomyelinase (haSMase, EC 3.1.4.12) catalyzes the lysosomal degradation of sphingomyelin to ceramide and phosphorylcholine. An inherited haSMase deficiency leads to Niemann-Pick disease, a severe sphingolipid storage disorder. The enzyme was purified and cloned over 10 years ago. Since then, only a few structural properties of haSMase have been elucidated. For understanding of its complex functions including its role in certain signaling and apoptosis events, complete structural information about the enzyme is necessary. Here, the identification of the disulfide bond pattern of haSMase is reported for the first time. Functional recombinant enzyme expressed in SF21 cells using the baculovirus expression system was purified and digested by trypsin. MALDI-MS analysis of the resulting peptides revealed the four disulfide bonds Cys120-Cys131, Cys385-Cys431, Cys584-Cys588 and Cys594-Cys607. Two additional disulfide bonds (Cys221-Cys226 and Cys227-Cys250) which were not directly accessible by tryptic cleavage, were identified by a combination of a method of partial reduction and MALDI-PSD analysis. In the sphingolipid activator protein (SAP)-homologous N-terminal domain of haSMase, one disulfide bond was assigned as Cys120-Cys131. The existence of two additional disulfide bridges in this region was proved, as was expected for the known disulfide bond pattern of SAP-type domains. These results support the hypothesis that haSMase possesses an intramolecular SAP-type activator domain as predicted by sequence comparison [Ponting, C.P. (1994) Protein Sci., 3, 359-361]. An additional analysis of haSMase isolated from human placenta shows that the recombinant and the native human protein possess an identical disulfide structure.     

Disulfide bonds of purothionine, a lethal toxin for yeasts.

Purothionin isolated from commercial wheat flour contained several components and two of them (A-I and A-II) were isolated in pure form by CM-52 column chromatography. Each component contained 45 amino acid residues with a 4 disulfide bonds. Purothionin A-II was digested with trypsin and thermolysin to isolate cystine peptides. These were separated and purified by chromatography on an SP-Sephadex column, and paper electrophoresis and chromatography. A peptide containing a -Cys-Cys- sequence was hydrolyzed with 10 N sulfuric acid. Amino acid compositions and partial sequence studies of the cystine peptides and their performic acid-oxidized peptides revealed the positions of all 4 disulfide bonds in purothionin A-II. They were formed between residues 3 and 39, 4 and 31, 12 and 29, and 16 and 25. The results of a partial study of purothionin A-I are also presented.     

Development of disulfide peptide mapping and determination of disulfide structure of recombinant human osteoprotegerin chimera produced in Escherichia coli

Recombinant human osteoprotegerin chimera is a 90-kDa protein containing a human IgG Fc domain fused to human osteoprotegerin. The molecule is a dimer linked by two intermolecular disulfide bonds and contains eleven intramolecular disulfide bonds per monomer. A cysteine-rich region in osteoprotegerin contains nine disulfide bridges homologous to the cysteine-rich signature structure of the tumor necrosis factor receptor/nerve growth factor receptor superfamily. In this report, we have developed peptide mapping procedures suitable to generate disulfide-containing peptides for disulfide structure assignment of the fusion molecule. The methods employed included proteolytic digestion using endoproteinases Glu-C and Lys-C in combination followed by LC-MS analyses. Disulfide linkages of peptide fragments containing a single disulfide bond were assigned by sequence analysis via detection of (phenylthiohydantoinyl) cystine and/or by MS analysis. Disulfide bonds of a large, core fragment containing three peptide sequences linked by four disulfides were assigned after generation of smaller disulfide-linked peptides by a secondary thermolysin digestion. Disulfide structures of peptide fragments containing two disulfide bonds were assigned using matrix-assisted laser desorption ionization mass spectrometry with postsource decay. Both the inter- and intramolecular disulfide linkages of the chimeric dimer were confirmed.     

The disulfide bond pattern of catrocollastatin C, a disintegrin-like/cysteine-rich protein isolated from Crotalus atrox venom

The disulfide bond pattern of catrocollastatin-C was determined by N-terminal sequencing and mass spectrometry. The N-terminal disintegrin-like domain is a compact structure including eight disulfide bonds, seven of them in the same pattern as the disintegrin bitistatin. The protein has two extra cysteine residues (XIII and XVI) that form an additional disulfide bond that is characteristically found in the disintegrin-like domains of cellular metalloproteinases (ADAMs) and PIII snake venom Zn-metalloproteinases (SVMPs). The C-terminal cysteine-rich domain of catrocollastatin-C contains five disulfide bonds between nearest-neighbor cysteines and a long range disulfide bridge between CysV and CysX. These results provide structural evidence for a redefinition of the disintegrin-like and cysteine-rich domain boundaries. An evolutionary pathway for ADAMs, PIII, and PII SVMPs based on disulfide bond engineering is also proposed.     

A novel approach to the synthesis of EGF-like domains: a method for the one-pot regioselective formation of the three disulfide bonds of a human blood coagulation factor VII EGF-1 analogue.

The study of EGF-like domains is of great general interest in protein science because of their participation in a multitude of protein-protein interactions. A common structural feature of EGF-like modules is the presence of three disulfide bonds, the regioselective formation of which still remains a challenge to peptide chemists. We report here on a method for the one-pot regioselective synthesis of an analogue of the EGF-1 domain of human coagulation Factor VII (residues 45-83) comprising an Asn57beta-Asp substitution. The cysteine protecting groups trityl, t-butyl and acetamidomethyl were chosen for the three disulfide bond pairings. All three disulfide bridges were prepared directly from the crude starting product, obviating the need for the timely and costly purification of the intermediate folded products. The fully folded product was purified by preparative high-pressure liquid chromatography prior to evaluation of its biological activity in an assay to detect inhibition of FVII/TF complex formation. In addition circular dichroism spectroscopy was employed to elucidate the main structural similarities between this peptide analogue and the native human Factor VII EGF-1 domain.     

Complete determination of disulfide bonds localized within the short consensus repeat units of decay accelerating factor (CD55 antigen).

Decay accelerating factor (DAF) has 4 SCR (short consensus repeat) units. Each SCR unit consists of approx. 60 amino acids characterized by having four conserved cysteine residues and several other highly conserved residues which include proline, tryptophan, tyrosine/phenylalanine and glycine. To determine the disulfide-bonding pattern, we used the urine form of DAF. After thermolysin and trypsin digestion, we isolated seven disulfide-linked peptides by HPLC purification. Because all of the cysteine residues are disulfide-bonded, DAF should contain eight disulfide bonds. After subtilisin and trypsin digestion, we isolated the eighth disulfide-bonded peptides by HPLC purification. From sequence analyses of these peptides, we could identify all disulfide bonds in the 4 SCR units of DAF as being between the first and the third and between the second and the fourth half-cystines within each SCR unit.     

Domain-level stability of an antibody monitored by reduction, differential alkylation, and mass spectrometry analysis

Human immunoglobulin G1 (IgG1) contains 12 domains, and each has an intrachain disulfide bond that connects the two layers of antiparallel β-sheets. These intrachain disulfide bonds are shielded from solvents under native conditions. Therefore, accessibility of the disulfide bonds to reduction under conditions that unfold antibody has the potential to be a good indicator of the thermodynamic stability of each domain. The stability of a recombinant monoclonal antibody at the domain level was investigated using a novel method involving reduction of the disulfide bonds in the presence of increasing amounts of guanidine hydrochloride and alkylation with [¹²C]iodoacetic acid, which was followed by reduction of the remaining disulfide bonds and alkylation with [¹³C]iodoacetic acid. The percentage of modification by [¹²C]iodoacetic acid of each cysteine residue was calculated using mass spectra of the cysteine-containing tryptic peptides and used to follow the unfolding of each domain. It demonstrated that the CH2 domain was the least stable domain of the antibody, whereas the CH3 domain was the most stable domain of the antibody. Other domains showed intermediate resistance to the denaturant concentration, similar to the overall unfolding transition monitored by the intrinsic tryptophan fluorescence wavelength shift.     

One-Way Allosteric Communication between the Two Disulfide Bonds in Tissue Factor

Tissue factor (TF) is a transmembrane glycoprotein that plays distinct roles in the initiation of extrinsic coagulation cascade and thrombosis. TF contains two disulfide bonds, one each in the N-terminal and C-terminal extracellular domains. The C-domain disulfide, Cys186-Cys209, has a ?RHStaple configuration in crystal structures, suggesting that this disulfide carries high pre-stress. The redox state of this disulfide has been proposed to regulate TF encryption/decryption. Ablating the N-domain Cys49-Cys57 disulfide bond was found to increase the redox potential of the Cys186-Cys209 bond, implying an allosteric communication between the domains. Using molecular dynamics simulations, we observed that the Cys186-Cys209 disulfide bond retained the ?RHStaple configuration, whereas the Cys49-Cys57 disulfide bond fluctuated widely. The Cys186-Cys209 bond featured the typical ?RHStaple disulfide properties, such as a longer S-S bond length, larger C-S-S angles, and higher bonded prestress, in comparison to the Cys49-Cys57 bond. Force distribution analysis was used to sense the subtle structural changes upon ablating the disulfide bonds, and allowed us to identify a one-way allosteric communication mechanism from the N-terminal to the C-terminal domain. We propose a force propagation pathway using a shortest-pathway algorithm, which we suggest is a useful method for searching allosteric signal transduction pathways in proteins. As a possible explanation for the pathway being one-way, we identified a pronounced lower degree of conformational fluctuation, or effectively higher stiffness, in the N-terminal domain. Thus, the changes of the rigid domain (N-terminal domain) can induce mechanical force propagation to the soft domain (C-terminal domain), but not vice versa.     

Locations of disulfide bonds and free cysteines in the heavy and light chains of recombinant human factor VIII (antihemophilic factor A).

The locations of disulfide bonds and free cysteines in the heavy and light chains of recombinant human factor VIII were determined by sequence analysis of fragments produced by chemical and enzymatic digestions. The A1 and A2 domains of the heavy chain and the A3 domain of the light chain contain one free cysteine and two disulfide bonds, whereas the C1 and C2 domains of the light chain have one disulfide bond and no free cysteine. The positions of these disulfide bonds are conserved in factor V and ceruloplasmin except that the second disulfide bond in the A3 domain is missing in both factor V and ceruloplasmin. The positions of the three free cysteines of factor VIII are the same as three of the four cysteines present in ceruloplasmin. However, the positions of the free cysteines in factor VIII and ceruloplasmin are not conserved in factor V.