Enantiomeric separation of baclofen by capillary electrophoresis tandem mass spectrometry with sulfobutylether-beta-cyclodextrin as chiral selector in partial filling mode

Capillary electrophoresis (CE) coupled to tandem mass spectrometry was applied to the chiral separation of baclofen using sulfobutylether-beta-cyclodextrin chiral selector in partial filling counter current mode. On-line UV detection was simultaneously used. Method optimization was performed by studying the effect of cyclodextrin and BGE concentration as well as sheath liquid composition on analyte migration time and enantiomeric resolution. The cyclodextrin showed stereoselective complexation towards baclofen enantiomers, allowing chiral resolution at low concentration. The CE capillary protrusion from the ESI needle relevantly affected the chiral resolution and the analyte migration time. Complete enantiomeric separation was obtained by using 0.25 M formic acid BGE containing 1.75 mM of chiral selector and water/methanol (30:70, v/v) 3% formic acid as sheath liquid. The method exhibited a LOD of 0.1 microg/mL (racemic concentration) in MS3 product ion scan mode of detection and was applied to the analysis of racemic baclofen in pharmaceutical formulations.     

High‐Performance Liquid Chromatographic Enantioseparation of Unusual Isoxazoline‐Fused 2‐Aminocyclopentanecarboxylic Acids on (+)‐(18‐Crown‐6)‐2,3,11,12‐Tetracarboxylic Acid‐Based Chiral Stationary Phases

The enantiomers of four unusual isoxazoline‐fused 2‐aminocyclopentanecarboxylic acids were directly separated on chiral stationary phases containing (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid as chiral selector. The nature of the alcoholic modifier (MeOH, EtOH, IPA) exerted a great effect on the retention, whereas the selectivity and resolution did not change substantially. Two types of dependence of retention on alcohol content were detected: k₁ increased continuously with increasing alcohol content or a U‐shaped retention curve was observed. A comparison of the chromatographic data obtained with HCOOH, AcOH, TFA, HClO₄, H₂SO₄, or H₃PO₄ as acidic modifier at a constant concentration demonstrated that in most cases, larger k values were obtained on the application of AcOH or HCOOH, and an increase of the acid content resulted in a decrease of retention. Some mechanistic aspects of the chiral recognition process are discussed with respect to the structures of the analytes and selector. The sequence of elution of the enantiomers was determined in all cases. Chirality 24:817‐824, 2012. © 2012 Wiley Periodicals, Inc.     

Chiral analysis of methylphenidate and dextromoramide by capillary electrophoresis

Capillary electrophoretic methods have been developed to separate the enantiomers of methylphenidate (MPH) and dextromoramide. For MPH separation was achieved with heptakis (2,6-di-O-methyl)-β-cyclodextrin (DMCD) as chiral selector in a 100 mM phosphoric acid buffer adjusted to pH 3.0 with triethanolamine. Commercial samples of d,l-erytho-MPH HCl and d,l-threo-MPH HCl were analysed using the method. There was no evidence of the presence of d,l-threo-MPH HCl in d,l-erytho-MPH HCl and vice versa. The ratio of the enantiomers was determined for each diastereoisomer. Hydroxypropyl-β-cyclodextrin was the chiral selector of choice for the chiral separation of the enantiomers of moramide. The separation which gave a resolution of about 3.5 was achieved in 4 min using only a 6 cm of length of capillary. In a sample of dextro-R-moramide tartrate only a small quantity (4.9% w/w) of levo-S-moramide was detected with this method.     

Indirect synchronous fluorescence spectroscopy and direct high‐performance thin‐layer chromatographic methods for enantioseperation of zopiclone and determination of chiral‐switching eszopiclone: Evaluation of thermodynamic quantities of chromatographic separation

Economic and enantioselective synchronous fluorescence spectroscopy and high‐performance thin‐layer chromatography methods have been developed and validated as per ICH guidelines for the separation of zopiclone enantiomers using L‐(+)‐tartaric acid as a chiral selector, followed by determination of the chiral‐switching eszopiclone. Synchronous fluorescence spectroscopy was successfully applied for chiral recognition of R & S enantiomers of zopiclone at ?λ = 110 nm based on creating of diastereomeric complexes with 0.06M tartaric acid in an aqueous medium containing 0.2M disodium hydrogen orthophosphate. Synchronous fluorescence intensities of eszopiclone were recorded at 296 nm in concentration range 0.2‐ to 4‐μg/mL eszopiclone. High‐performance thin‐layer chromatography method depends on resolution of zopiclone enantiomers on achiral HPTLC silica‐gel plates using acetonitrile:methanol:water (8:2:0.25, v/v/v) containing L‐(+)‐tartaric acid as a chiral mobile‐phase additive followed by densitometric measurements at 304 nm in concentration range of 1 to 10 μg/band of eszopiclone. The effect of chiral‐selector concentration, pH, and temperature on the resolution have been studied and optimized for the proposed methods. The cited procedures were successfully applied to determine eszopiclone in commercial tablets of pure and racemic forms. Enantiomeric excess was evaluated using optical purity test and integrated peak area to describe the enantiomeric ratio. Thermodynamics of chromatographic separation, enthalpy, and entropy were evaluated using the Van't Hoff equation. The proposed methods were found to be selective for identification and determination of the eutomer in drug substances and products.     

Maltodextrins as Chiral Selectors in CE: Molecular Structure Effect of Basic Chiral Compounds on the Enantioseparation

Prediction of chiral separation for a compound using a chiral selector is an interesting and debatable work. For this purpose, in this study 23 chiral basic drugs with different chemical structures were selected as model solutes and the influence of their chemical structures on the enantioseparation in the presence of maltodextrin (MD) as chiral selector was investigated. For chiral separation, a 100‐mM phosphate buffer solution (pH 3.0) containing 10% (w/v) MD with dextrose equivalent (DE) of 4‐7 as chiral selector at the temperature of 25°C and voltage of 20 kV was used. Under this condition, baseline separation was achieved for nine chiral compounds and partial separation was obtained for another six chiral compounds while no enantioseparation was obtained for the remaining eight compounds. The results showed that the existence of at least two aromatic rings or cycloalkanes and an oxygen or nitrogen atom or –CN group directly bonded to the chiral center are necessary for baseline separation. With the obtained results in this study, chiral separation of a chiral compound can be estimated with MD‐modified capillary electrophoresis before analysis. This prediction will minimize the number of preliminary experiments required to resolve enantiomers and will save time and cost. Chirality 26:620–628, 2014. © 2014 Wiley Periodicals, Inc.     

Enantioseparation of Mandelic Acid Enantiomers With Magnetic Nano‐Sorbent Modified by a Chiral Selector

In this study, R(+)‐α‐methylbenzylamine‐modified magnetic chiral sorbent was synthesized and assessed as a new enantioselective solid phase sorbent for separation of mandelic acid enantiomers from aqueous solutions. The chemical structures and magnetic properties of the new sorbent were characterized by vibrating sample magnetometry, transmission electron microscopy, Fourier transform infrared spectroscopy, and dynamic light scattering. The effects of different variables such as the initial concentration of racemic mandelic acid, dosage of sorbent, and contact time upon sorption characteristics of mandelic acid enantiomers on magnetic chiral sorbent were investigated. The sorption of mandelic acid enantiomers followed a pseudo‐second‐order reaction and equilibrium experiments were well fitted to a Langmuir isotherm model. The maximum adsorption capacity of racemic mandelic acid on to the magnetic chiral sorbent was found to be 405 mg g^?1. The magnetic chiral sorbent has a greater affinity for (S)‐(+)‐mandelic acid compared to (R)‐(?)‐mandelic acid. The optimum resolution was achieved with 10 mL 30 mM of racemic mandelic acid and 110 mg of magnetic chiral sorbent. The best percent enantiomeric excess values (up to 64%) were obtained by use of a chiralpak AD‐H column. Chirality 27:835–842, 2015. © 2015 Wiley Periodicals, Inc.     

Enantiomeric separation of N‐protected amino acids by non‐aqueous capillary electrophoresis using quinine or Tert‐butyl carbamoylated quinine as chiral additive

A capillary electrophoretic (CE) method for the enantioseparation of N‐protected chiral amino acids was developed using quinine and tert‐butyl carbamoylated quinine as chiral selectors added to nonaqueous electrolyte solutions (NACE). A series of various N‐derivatized amino acids were tested as chiral selectands, and in order to optimize the CE enantioseparation of these compounds, different parameters were investigated: the nature of the organic solvent, the combination of different solvents, the nature and the concentration of the background electrolyte, the selector concentration, the capillary temperature, and the applied voltage. The influence of these factors on the separation of the analyte enantiomers and the electroosmotic flow was studied. Generally, with tert‐butyl carbamoylated quinine as chiral selector, better enantioseparations were achieved than with unmodified quinine. Optimum experimental conditions were found with a buffer made of 12.5 mM ammonia, 100 mM octanoic acid, and 10 mM tert‐butyl carbamoylated quinine in an ethanol–methanol mixture (60:40 v/v). Under these conditions, DNB‐Leu enantiomers could be separated with a selectivity factor (α) of 1.572 and a resolution (Rs) of 64.3; a plate number (N) of 127,000 and an asymmetry factor (As) of 0.93 were obtained for the first migrating enantiomer. Chirality 11:622–630, 1999. © 1999 Wiley‐Liss, Inc.     

Chiral Discrimination of Ofloxacin Enantiomers Using DNA Double Helix Regulated by Metal Ions

DNA‐based chiral selectors are constructed to discriminate ofloxacin enantiomers through metal‐ion anchoring on a special DNA double helix that contains successive GC pairs. The effects of metal ions involving Mg²⁺, Ni²⁺, Cu²⁺, Ag⁺, and Pt²⁺ were studied on the regulation of DNA chiral discrimination towards ofloxacin enantiomers. It is shown that DNA‐Cu(II) complexes exhibit the highest enantioselectivities at the [Cu²⁺]/base ratio of 0.1. The enantiomeric excess can reach 59% in R‐enantiomer after being adsorbed by the RET‐Cu(II) complex. Stereoselective recognition of ofloxacin enantiomers on the double helix is tunable via external stimulus, providing a programmable desorption process to regenerate DNA. This DNA‐based chiral selector exhibits excellent reusability without apparent loss of enantioselectivity after three cycles of adsorption and desorption. Chirality 26:249–254, 2014. © 2014 Wiley Periodicals, Inc.     

Chiral Separation of Uncharged Pomalidomide Enantiomers Using Carboxymethyl‐β‐Cyclodextrin: A Validated Capillary Electrophoretic Method

The racemic mixture of pomalidomide (POM), a second‐generation immunomodulatory uncharged drug, was separated into enantiomers by capillary zone electrophoresis for the first time. Seven different chargeable cyclodextrin (CD) derivatives were screened as complexing agents and chiral selectors, investigating the stability of the POM‐CD inclusion complexes and their enantiodiscriminating capacities. Based on preliminary experiments, carboxymethyl‐β‐CD (CM‐β‐CD) was found to be the most effective chiral selector. Factors influencing enantioseparation were systematically optimized, using an orthogonal experimental design. Optimal parameters (background electrolyte [BGE]: 50 mM Tris‐acetate buffer, pH 6.5, containing 15 mM CM‐β‐CD; capillary temperature: 20°C; voltage applied +15 kV) allowed baseline separation of POM enantiomers with a resolution as high as 4.87. The developed method was validated, in terms of sensitivity (limit of detection and limit of quantification), linearity, accuracy, repeatability, and intermediate precision. Chirality 28:199–203, 2016. © 2015 Wiley Periodicals, Inc.     

Enantioanalysis of Pipecolic Acid with Stochastic and Potentiometric Microsensors

Stochastic and potentiometric microsensors based on porphyrins and polymeric surfactants such as polysodium N‐undecanoyl‐ l ‐leucylvanilate and polysodium 相似文献   

Isothermal Titration Calorimetry of Chiral Polymeric Nanoparticles

Chiral polymeric nanoparticles are of prime importance, mainly due to their enantioselective potential, for many applications such as catalysis and chiral separation in chromatography. In this article we report on the preparation of chiral polymeric nanoparticles by miniemulsion polymerization. In addition, we describe the use of isothermal titration calorimetry (ITC) to measure the chiral interactions and the energetics of the adsorption of enantiomers from aqueous solutions onto chiral polymeric nanoparticles. The characterization of chirality in nano‐systems is a very challenging task; here, we demonstrate that ITC can be used to accurately determine the thermodynamic parameters associated with the chiral interactions of nanoparticles. The use of ITC to measure the energetics of chiral interactions and recognition at the surfaces of chiral nanoparticles can be applied to other nanoscale chiral systems and can provide further insight into the chiral discrimination processes of nanomaterials. Chirality 27:613–618, 2015. © 2015 Wiley Periodicals, Inc.     

Chiral HPLC Separation and Modeling of Four Stereomers of DL‐Leucine‐DL‐Tryptophan Dipeptide on Amylose Chiral Column

Chiral high‐performance liquid chromatography (HPLC) separation and modeling of four stereomers of DL‐leucine‐tryptophan DL‐dipeptide on AmyCoat‐RP column are described. The mobile phase applied was ammonium acetate (10 mM)‐methanol‐acetonitrile (50:5:45, v/v). The flow rate of the mobile phases was 0.8 mL/min with UV detection at 230 nm. The values of retention factors for LL‐, DD‐, DL‐, and LD‐ stereomers were 2.25, 3.60, 5.00, and 6.50, respectively. The values of separation and resolution factors were 1.60, 1.39, and 1.30 and 7.76, 8.05, and 7.19. The limits of detection and quantitation were ranging from 1.0–2.3 and 5.6–14.0 μg/mL. The simulation studies established the elution orders and the mechanism of chiral recognition. It was seen that π–π connections and hydrogen bondings were the main forces for enantiomeric resolution. The reported chiral HPLC method may be applied for the enantiomeric separation of DL‐leucine‐DL‐tryptophan in unknown matrices. Chirality 28:642–648, 2016. © 2016 Wiley Periodicals, Inc.     

Enantioselective Degradation of the Chiral Fungicides Metalaxyl and Furalaxyl by Brevibacillus brevis

For almost four decades, the chiral fungicides metalaxyl and furalaxyl have been in use in plant protection on a global scale. Both substances are distributed as racemic mixtures, yet the desirable interference in nucleic acid synthesis of harmful fungi only occurs by the (‐)‐R‐enantiomer. As enantioselective degradation in Scheyern (Germany) and Yaoundé (Cameroon) soils has been documented, the influence of 50 isolated microorganisms on the R/S ratio was investigated. A high‐pressure liquid chromatography method with a chiral column to separate enantiomers of metalaxyl and furalaxyl, and subsequent detection by tandem mass spectrometry, was employed. Only one of these microorganisms, a strain of Brevibacillus brevis, showed an enantioselective degradation pattern in liquid culture; the respective (‐)‐R‐enantiomers were preferably degraded. Moreover, (‐)‐R‐furalaxyl was degraded faster in cultures supplemented simultaneously with both fungicides of the same concentration. Chirality 25:336–340, 2013. © 2013 Wiley‐Liss Inc. Chirality 00:000‐000:, 2013. © 2013 Wiley Periodicals, Inc.     

The Chiral Separation and Enantioselective Degradation of the Chiral Herbicide Napropamide

The chiral pesticide enantiomers often have different toxic effects and environmental behaviors, which suggests that the risk assessments should be on an enantiomeric level. In this work, the chiral separation of the napropamide enantiomers and the stereoselective degradation in tomato, cucumber, rape, cabbage, and soil were investigated. Napropamide enantiomers could be separated absolutely by high‐performance liquid chromatography (HPLC) using a Chiralpak IC column with a resolution factor of 11.75 under the optimized condition. Solid phase extraction (SPE) was used for cleanup of the enantiomers in the vegetable samples. The residue analysis method was validated. Good linearities (R² = 0.9997) and recoveries (71.43% ‐97.64%) were obtained. The limits of detection (LOD) were 0.05 mg/kg in soil and 0.20 mg/kg in vegetables. The results of degradation showed that napropamide dissipated rapidly in vegetables with half‐lives of only 1.13–2.21 days, but much more slowly in soil, with a half‐life of 11.95 d. Slight stereoselective degradation of the two enantiomers was only observed in cabbage, with enantiomeric fraction (EF) = 0.46, and there was no enantioselectivity in the other vegetables. The degradation of napropamide in the five matrixes was fast, and there was no enantioselectivity. Chirality 28:108–113, 2014. © 2014 Wiley Periodicals, Inc.     

HPLC‐Fluorescence Method for the Enantioselective Analysis of Propranolol in Rat Serum Using Immobilized Polysaccharide‐Based Chiral Stationary Phase

A stereoselective high‐performance liquid chromatographic (HPLC) method was developed and validated to determine S‐(?)‐ and R‐(+)‐propranolol in rat serum. Enantiomeric resolution was achieved on cellulose tris(3,5‐dimethylphenylcarbamate) immobilized onto spherical porous silica chiral stationary phase (CSP) known as Chiralpak IB. A simple analytical method was validated using a mobile phase consisted of n‐hexane‐ethanol‐triethylamine (95:5:0.4%, v/v/v) at a flow rate of 0.6 mL min^‐1 and fluorescence detection set at excitation/emission wavelengths 290/375 nm. The calibration curves were linear over the range of 10–400 ng mL^‐1 (R = 0.999) for each enantiomer with a detection limit of 3 ng mL^‐1. The proposed method was validated in compliance with ICH guidelines in terms of linearity, accuracy, precision, limits of detection and quantitation, and other aspects of analytical validation. Actual quantification could be made for propranolol isomers in serum obtained from rats that had been intraperitoneally (i.p.) administered a single dose of the drug. The proposed method established in this study is simple and sensitive enough to be adopted in the fields of clinical and forensic toxicology. Molecular modeling studies including energy minimization and docking studies were first performed to illustrate the mechanism by which the active enantiomer binds to the β‐adrenergic receptor and second to find a suitable interpretation of how both enantiomers are interacting with cellulose tris(3,5‐dimethylphenylcarbamate) CSP during the process of resolution. The latter interaction was demonstrated by calculating the binding affinities and interaction distances between propranolol enantiomers and chiral selector. Chirality 26:194–199, 2014. © 2014 Wiley Periodicals, Inc.     

Separation of Tryptophan Enantiomers by Ligand‐Exchange Chromatography With Novel Chiral Ionic Liquids Ligand

Chiral ionic liquids (CILs) with amino acids as cations have been applied as novel chiral ligands coordinated with Cu²⁺ to separate tryptophan enantiomers in ligand exchange chromatography. Four kinds of amino acid ionic liquids, including [L‐Pro][CF₃COO], [L‐Pro][NO₃], [L‐Pro]₂[SO₄], and [L‐Phe][CF₃COO] were successfully synthesized and used for separation of tryptophan enantiomers. To optimize the separation conditions, [L‐Pro][CF₃COO] was selected as the model ligand. Some factors influencing the efficiency of chiral separation, such as copper ion concentration, CILs concentration, methanol ratio (methanol/H₂O, v/v), and pH, were investigated. The obtained optimal separation conditions were as follows: 8.0 mmol/L Cu(OAc)₂, 4.0 mmol/L [L‐Pro][CF₃COO] ,and 20% (v/v) methanol at pH 3.6. Under the optimum conditions, acceptable enantioseparation of tryptophan enantiomers could be observed with a resolution of 1.89. The results demonstrate the good applicability of CILs with amino acids as cations for chiral separation. Furthermore, a comparative study was also conducted for exploring the mechanism of the CILs as new ligands in ligand exchange chromatography. Chirality 26:160–165, 2014. © 2014 Wiley Periodicals, Inc.     

Simple Resolution of Enantiomeric NMR Signals of α‐Amino Acids by Using Samarium(III) Nitrate With L‐Tartarate

Readily available L‐tartaric acid, which is a bidentate ligand with two chiral centers forming a seven‐membered chelate ring, was applied to the chiral ligand for the chiral nuclear magnetic resonance (NMR) shift reagent of samarium(III) formed in situ. This simple method does not cause serious signal broadening in the high magnetic field. Enantiomeric ¹³C and ¹H NMR signals and enantiotopic ¹H NMR signals of α‐amino acids were successfully resolved at pH 8.0 and the 1:3 molar ratio of Sm(NO₃)₃:L‐tartaric acid. It is elucidated that the enantiomeric signal resolution is attributed to the anisotropic magnetic environment for the enantiomers induced by the chiral L‐tartarato samarium(III) complex rather than differences in stability of the diastereomeric substrate adducts. The present ¹³C NMR signal resolution was also effective for the practical simultaneous analysis of plural kinds of DL‐amino acids. Chirality 27:353–357, 2015.© 2015 Wiley Periodicals, Inc.     

Comparison of separation performances of amylose‐ and cellulose‐based stationary phases in the high‐performance liquid chromatographic enantioseparation of stereoisomers of β‐lactams

High‐performance liquid chromatographic methods were developed for the separation of the enantiomers of 19 β‐lactams. The direct separations were performed on chiral stationary phases containing either amylose‐tris‐3,5‐dimethylphenyl carbamate, (Kromasil® AmyCoat? column) or cellulose‐tris‐3,5‐dimethylphenyl carbamate, (Kromasil® CelluCoat? column) as chiral selector. The different methods were compared in systematic chromatographic examinations. The separations were carried out with good selectivity and resolution. The AmyCoat? and CelluCoat? columns appear to be highly complementary. The best separations of bi‐ and tricyclic β‐lactam stereoisomers were obtained with the AmyCoat? column, whereas the 4‐aryl‐substituted β‐lactams were better separated on the CelluCoat? column. The elution sequence was determined in all cases; no general rule could be established. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Chiral separation-based ligand exchange by open-tubular capillary electrochromatography

Chiral ligand-exchange enantioseparation of aliphatic and aromatic amino acids was successfully performed using a new open-tubular zwitterionic column with tentacle-type polymer stationary phase. The polymeric stationary phase was prepared using 3-chloro-2-hydroxypropyl methacrylate (HPMA-Cl), a new reactive monomer. The preparation procedure of the open-tubular column included silanization, in situ graft polymerization with HPMA-Cl, and l-histidine (l-His) modification. l-His was used as a chiral ligand-exchange selector and copper(II) as a central ion. Successful enantioseparation of six pairs of amino acid enantiomers was achieved with a buffer of 5 mM CuSO₄, 20 mM (NH₄)₂SO₄ at pH 3.0.     

Chiral Separation of Four Stereoisomers of Ketoconazole Drugs Using Capillary Electrophoresis

This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6‐tri‐O‐methyl)‐β‐cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10 mM phosphate buffer at pH 2.5 containing 20 mM TMβCD, 5 mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5‐s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively. Chirality 27:223–227, 2015. © 2014 Wiley Periodicals, Inc.