樟子松人工林树冠结构的分形分析

基于樟子松人工林7块固定标准地中的31株解析木的树冠体积和叶量,以幂函数关系(F=Av^(D/3))建立了预估树冠表面积的分形维数。同时根据生物量实测数据,建立预估叶量的生物模型Lw=0.180397D^3045903H^-1.67348。基于枝解析、树干解析数据,动态地预估了一年、二年、三年前的树冠体积,并结合树冠体积、叶量的这种幂函数关系可以动态地预估一年、二年、三年前树冠表面积的分形维数,从而反映出树冠结构的动态变化规律。为了了解不同分级样木的分维数变化情况,利用2003年调查的4块生物量标准地数据,根据单株树木各个枝条占据的空间体积与该枝条的带叶枝干重的关系,计算了各标准地不同分级样木树冠的分维数。为探讨单株样木树冠的分维数的计算提供了一种可行方法。树冠的分维数作为表征树冠的动态生长变化是一有用和可靠的指标。     

A factor analysis of morphogenetic fields in the human dentition

The traditional morphogenetic fields of the human dentition were evaluated by means of factor analysis of dental dimensions taken from a series of human crania. When crown length, crown width and crown index were considered separately, factors emerged which could be identified with the tooth group fields. But a combined crown length-crown width analysis generated factors which extended beyond the regional tooth groups. Crown width itself was revealed to be an important axis of morphologic intergration. It was concluded that univariate methods are not adequate for identifying morphogenetic fields; the teeth must be treated as multidimensional units where the correlation among dimensions is accounted for.     

Estimating Canopy Structure in an Amazon Forest from Laser Range Finder and IKONOS Satellite Observations1

Canopy structural data can be used for biomass estimation and studies of carbon cycling, disturbance, energy balance, and hydrological processes in tropical forest ecosystems. Scarce information on canopy dimensions reflects the difficulties associated with measuring crown height, width, depth, and area in tall, humid tropical forests. New field and spaceborne observations provide an opportunity to acquire these measurements, but the accuracy and reliability of the methods are unknown. We used a handheld laser range finder to estimate tree crown height, diameter, and depth in a lowland tropical forest in the eastern Amazon, Brazil, for a sampling of 300 trees stratified by diameter at breast height (DBH). We found significant relationships between DBH and both tree height and crown diameter derived from the laser measurements. We also quantified changes in crown shape between tree height classes, finding a significant but weak positive trend between crown depth and width. We then compared the field‐based measurements of crown diameter and area to estimates derived manually from panchromatic 0.8 m spatial resolution IKONOS satellite imagery. Median crown diameter derived from satellite observations was 78 percent greater than that derived from field‐based laser measurements. The statistical distribution of crown diameters from IKONOS was biased toward larger trees, probably due to merging of smaller tree crowns, underestimation of understory trees, and overestimation of individual crown dimensions. The median crown area derived from IKONOS was 65 percent higher than the value modeled from field‐based measurements. We conclude that manual interpretation of IKONOS satellite data did not accurately estimate distributions of tree crown dimensions in a tall tropical forest of eastern Amazonia. Other methods will be needed to more accurately estimate crown dimensions from high spatial resolution satellite imagery.     

Comparative study of mesiodistal crown diameters and arch dimensions between indigenous British and Pakistani immigrant populations

Over the last two decades, the United Kingdom has seen an increase in the number of immigrants from the Indian subcontinent, mainly Pakistan. The amount of information that is available regarding parameters such as mesiodistal crown diameters and dental arch dimensions is, however, somewhat limited for this population. An investigation was carried out to compare corresponding mesiodistal crown diameters and arch dimensions between samples of the indigenous British population in Leeds (England) and the Pakistani immigrant population living in Rochdale (England). Measurements were taken from dental casts. The results showed that there were no significant differences between the two ethnic groups in corresponding mesiodistal crown diameters or arch dimensions. Data are provided for the Pakistani immigrant population in Britain.     

Crown dimensions of deciduous teeth from pre-Columbian Peru

The mean mesiodistal and buccolingual diameters are presented for the deciduous teeth from Pre-Columbian Peru. Generally, the deciduous teeth from Pre-Columbian Peru are larger in most dimensions than the deciduous teeth of modern populations of European descent and smaller than those of modern Australian aboriginals. Differences in crown dimensions between the Pre-Columbian Peruvian deciduous teeth and those from Prehistoric Inamgaon and Mesolithic Europe are inconsistent. However, the maxillary and mandibular second molars are larger in the Peruvian population while the incisors are smaller. Since comparative data for prehistoric deciduous teeth are rare, this paper adds valuable data to the growing literature on deciduous crown dimensions.     

The effect of prenatal factors on crown dimensions

As shown in 870 white participants in the National Collaborative Perinatal Project (NCPP), maternal health status during pregnancy and birth size are systematically related to mesiodistal and buccolingual crown dimensions of I1, I2, dc, dm1, dm2 and M1. Maternal diabetes, maternal hypothyroidism and large size at birth are associated with larger maxillary and mandibular teeth in white children. Conversely, deciduous and permanent crown diameters are diminished in maternal hypertension, and in low birthweight and small birth-length conditions. These findings suggest that maternal and fetal (or gestational) determinants of both deciduous and permanent tooth crown dimensions may account for as much as half of crown-size variability with major implications to population comparisons and historical odontometric differences and trends.     

Analysis of stand density effects on canopy structure: a conceptual approach

Summary A few assumptions were used to generate a series of specific, quantitative predictions for the relationships between stand density and various dimensional measures of canopy structure. The predictions, each indicating an increase in mean crown size as density decreased, appeared to be reasonable and intuitive. Predictions were compared to data for two conifer species with different crown forms, Pinus contorta var. latifolia and Abies lasiocarpa. Results of these comparisons were mixed — the linear, directly measured dimensions were consistent with predicted relationships, but dimensions calculated from the linear measures were not. Re-examination of the original assumptions indicated that the model should account for crown shyness (engagement/disengagement) to adequately reflect the influence of stand density on canopy structure. The results also indicated a strong association between stand height and measures of mean crown size. Mean crown size of lodgepole pine was altered much more by density than was mean crown size of subalpine fir, due primarily to the different relative shade tolerances of the two species. Some of the observed differences between species may also reflect the range of densities examined and uneven spacing in the unmanaged natural stands.     

Sex discriminatory effectiveness using combinations of root lengths and crown diameters

Using optical-scanner (OPTOCOM) and radiogrammetric measurements on mandibular permanent teeth, root length alone affords sex-discriminatory effectiveness equal to or exceeding conventional crown diameters. Combinations of root lengths and crown dimensions yield up to 80% accuracy in sexing with as few as two teeth, and discriminatory effectiveness of 87% with mandibular teeth alone.     

Estimating canine tooth crown height in early Australopithecus

Canine tooth size reduction and the associated reduction in canine dimorphism is a basal hominin character that also provides important evidence for models of behavioral evolution. Two specimens of Australopithecus anamensis (KNM-KP 29287 and KNM-KP 29283) that do not preserve the canine crown, but do preserve the root or alveolus, appear to suggest that canine size variation and canine dimorphism in this species may have been greater than in other hominins. We evaluate canine root and crown dimensions in a series of extant hominoids, and estimate canine crown height in Australopithecus afarensis and A. anamensis. Our results demonstrate that it is possible to generate estimates of canine crown height from basal canine crown and root dimensions with a moderate degree of accuracy. Estimates of maxillary canine crown size for A. anamensis are slightly larger than those of A. afarensis, and are approximately the same size as canines of modern female chimpanzees. Estimated mandibular canine crown height is very similar in the two species. Variation within the A. anamensis sample of estimated canine crown heights is similar to that of modern humans, suggesting a low degree of sexual dimorphism. Inclusion of estimates for KNM-KP 29287 and KNM-KP 29283 does not substantially increase either the estimate of overall canine size or variation for A. anamensis.     

The relationship between organ weights and body weights, facial dimensions, and dental dimensions in a population of olive baboons (Papio cynocephalus anubis)

Questions concerned with the relationship between organ weights and body weight on an intraspecific level are best answered by using a sample of animals collected in the wild from a single locale during a single season. The organ weights and body weights for this study were obtained from the necropsy reports prepared in the field (Athi Plain, Kenya) by H. C. McGill, Jr. on 36 adult animals (18 males and 18 females). Dental and facial measurements were taken by M.I. Siegel. In order to avoid erroneous results produced by statistical treatment of combined sex samples of sexually dimorphic species, data on the sexes were analyzed separately. Means and standard deviations are reported for selected organ weights and body dimensions (heart, lung, liver, spleen, kidney, adrenal, brain, and pancreas weights, crown–rump length, crown–heel length, head circumference, chest circumference, and body weight). All of the above measures were significantly (p<0.05) different between the sexes. Logarithms of these measures were significantly correlated with the logarithm of body weight in males for heart, lung, liver, spleen, kidney, and adrenal weights, crown–heel length, and head and chest circumference, and in females for crown–heel length, heart, liver, and kidney weights. Partial correlational analysis, removing the effects of body size (weight), showed mostly negative correlational relationships between dental and visceral dimensions. Most of the correlations between facial and visceral dimensions were negative. Allometric equations were calculated for the dental, facial, and visceral dimensions versus body weight, and are compared with prior published results.     

Stem and crown allometry in four congeneric species of dioecious tropical trees

Key message

Congeneric species showed similar stem and crown allometry, but differed in crown dimensions indicating that crown size is adaptive and variable despite mechanical restrictions.

Abstract

Morphological adaptations favor differential use of the space in tropical trees, but the variability in stem and crown allometry can be constrained by phylogenetic and mechanical factors. In addition, dioecious species show marked differences in their energy requirements related to reproduction, but little information is available about the role of shape and allometry on differential acquisition of energy between the sexes. We studied the stem and crown dimensions of congeneric dioecious trees to determine if there are: (i) differences in the allometry between the sexes, (ii) different average sizes among sympatric species, and (iii) differences in stem and crown allometry between sympatric and allopatric species. Two pairs of sympatric Virola (Myristicaceae) in Brazil and Costa Rica were studied. SMA regression models were used to investigate allometric relationships between diameter at breast height (DBH) and tree height, and between DBH and crown volume (CV). No sexual dimorphism in stem and crown morphology was observed in this study, indicating that differences in resource allocation for reproduction between the sexes do not impact the stem and crown structure in these species. Overall, low variability among the species was observed. Only one species differed in stem allometry and none differed in crown allometry. CV differed between sympatric species. Stem and crown allometry are related to structural stability and our results support similar mechanical restriction for these species. The ecological significance of differences in CV among canopy species remains to be explored.

     

长江上游暗针叶林优势树种峨嵋冷杉的树体分维结构研究

以长江上游亚高山地区水碛物、坡积物上的原始峨嵋冷杉为研究对象,采用分形几何理论剖析了树体分枝结构,结果表明,峨嵋冷杉树冠的最大冠幅出现在树冠下部的20％处,其体积可以用圆台与圆锥来模拟,主干与侧枝分枝均长短相间排列,树冠表面积和侧枝发枝结构具有分形分布特征,分形维数分别为2．3232和1．8119,相关系达0．99。     

Comparative odontometry of the permanent post-canine dentition of American Whites and Negroes

The permanent post-canine teeth of American Whites and American Negroes of the New York City area were studied odontometrically. The mesio-distal and bucco-lingual dimensions of the crowns were measured, as was the total tooth height and crown height. The individual root lengths of these teeth were also measured, in several ways, as was root width. The mean total root volumes of these teeth was measured by a unique mercury displacement method. In another aspect of this study the mean angular divergence of the roots from a mid-coronal vertical plane was determined, while the robustness of these roots was described as a ratio between root width and length. Finally, an extensive comparison was made between our data and those in the literature on a number of African Negro populations. American Negro tooth crown and root dimensions and volumes were significantly different from those of American Whites only sporadically, although the Negro teeth usually tended to be larger. Our comparative data gave some indication that the size of both the maxillary and mandibular American negro teeth, as well as the shape of the mandibular (but not the maxillary) American Negro teeth are roughly intermediate between those of American Whites and South African Negroes. This suggestion that a “hybrid” population may possess intermediate values of crown index and of crown module is supported by our analysis of Hottentot-South African Negro hybrids with their presumptive parental stocks.     

Crown allometries are less responsive than stem allometry to tree size and habitat variations in an Indian monsoon forest

While theoretical allometric models postulate universal scaling exponents, empirical relationships between tree dimensions show marked variability that reflects changes in the biomass allocation pattern. As growth of the various tree compartments may be controlled by different functions, it is hypothesized that they may respond differently to factors of variation, resulting in variable tree morphologies and potentially in trade-offs between allometric relationships. We explore the variability of tree stem and crown allometries using a dataset of 1,729 trees located in an undisturbed wet evergreen forest of the Western Ghats, India. We specifically test whether species adult stature, terrain slope, tree size and crown light exposure affect the relationships between stem diameter and stem height (stem allometry), and between stem diameter and crown width, crown area and crown volume (crown allometries). Results show that both stem and crown allometries are subject to variations in relation to both endogenous (tree size, species adult stature) and exogenous (terrain slope, crown light exposure) factors. Stem allometry appears to be more affected by these factors than are crown allometries, including the stem diameter–crown volume relationship, which proved to be particularly stable. Our results support the idea that height is a prevailing adjustment factor for a tree facing variable growth (notably light) conditions, while stem diameter–crown volume allometry responds more to internal metabolic constraints. We ultimately discuss the various sources of variability in the stem and crown allometries of tropical trees that likely play an important role in forest community dynamics.     

Exploring ecological significance of tree crown plasticity through three-dimensional modelling

BACKGROUND AND AIMS: Morphogenetic plasticity may be as important as physiological plasticity in determining plant adaptability to changing environmental conditions. This study examines the importance of crown plasticity of trees in stands. METHODS: A three-dimensional forest simulator is used to explore the impact of crown shape plasticity on tree growth. Crown deformation is mediated through the local response to light and overall allometric constraints governing tree dimensions. By altering shape response parameters of Hevea brasiliensis the impact of increased or decreased plasticity is explored in a variety of competitive environments defined by various combinations of tree density and relative frequency of different strategies. The possible interactions between plasticity and growth rate and plasticity and below-ground competition are also explored. KEY RESULTS: Crown plasticity confers competitive superiority in all cases studied. Interactions with other processes may downplay or enhance this competitive advantage. CONCLUSIONS: Simulation results strongly suggest that crown plasticity does have a significant impact on tree performance in nature and that commonly observed crown shape deformation response of trees is of adaptive value.     

Amazon Forest Structure from IKONOS Satellite Data and the Automated Characterization of Forest Canopy Properties

We developed an automated tree crown analysis algorithm using 1-m panchromatic IKONOS satellite images to examine forest canopy structure in the Brazilian Amazon. The algorithm was calibrated on the landscape level with tree geometry and forest stand data at the Fazenda Cauaxi (3.75° S, 48.37° W) in the eastern Amazon, and then compared with forest stand data at Tapajos National Forest (3.08° S, 54.94° W) in the central Amazon. The average remotely sensed crown width (mean ± SE) was 12.7 ± 0.1 m (range: 2.0–34.0 m) and frequency of trees was 76.6 trees/ha at Cauaxi. At Tapajos, remotely sensed crown width was 13.1 ± 0.1 m (range: 2.0–38.0 m) and frequency of trees was 76.4 trees/ha. At both Cauaxi and Tapajos, the remotely sensed average crown widths were within 3 percent of the crown widths derived from field measurements, although crown distributions showed significant differences between field-measured and automated methods. We used the remote sensing algorithm to estimate crown dimensions and forest structural properties in 51 forest stands (1 km²) throughout the Brazilian Amazon. The estimated crown widths, tree diameters (dbh), and stem frequencies differed widely among sites, while estimated biomass was similar among most sites. Sources of observed errors included an inability to detect understory crowns and to separate adjacent, intermingled crowns. Nonetheless, our technique can serve to provide information about structural characteristics of large areas of unsurveyed forest throughout Amazonia.     

Tooth dimensions of Southern Chinese.

Teeth in casts of a random sample from the Hong Kong Oral Health Survey of 12-year-old children (n=459; 295 boys and 164 girls) were measured in the mesiodistal, buccolingual, and clinical crown height dimensions. Sexual dimorphism was evident in all tooth types in nearly all tooth dimensions, with the exception of the mesiodistal dimension of mandibular central incisors. The Chinese male tooth dimensions were larger than in females in nearly all characters. The measurements were compared with other human groups. Results showed that the Southern Chinese had larger tooth dimensions than the Japanese and than the White Americans. Hence it is important to have data concerning a relevant human group for purposes of clinical diagnosis and planning of treatment. These data may also be useful in forensic dentistry.     

Tooth crown morphology in caecilians (Amphibia: Gymnophiona)

The morphology of tooth crowns is variable inter-specifically among caecilians. Cusp number and shape, crown dimensions, and crown curvature characterize various species and have both functional and phylogenetic implications. Ichthyophis, Uraeotyphlus, Hypogeophis, and Geotrypetes have bicuspid teeth; Dermophis, Gymnopis, Caecilia, and Typhlonectes monocuspid. Crown morphology as revealed by scanning electron microscopy is associated with prey grasping and, in one case, possible specialization of prey type.     

Measure of simultaneous tree sways and estimation of crown interactions among a group of trees

We present a technique to measure the simultaneous sway of a group of trees and reconstruct the frequency of crown collisions and sway dynamics of individual or groups of trees. We placed a biaxial clinometer (tiltmeter) at the live crown base in each of ten neighboring 15-m-tall lodgepole pine trees in Alberta, Canada. Tree bole rotation at tiltmeter mount height was recorded during windy conditions at a rate of 10 times/s for the cluster of trees. Rotation angles were used in a bole curve calculation to estimate tree displacement in 2-dimensional (x, y) space. Collision reconstruction was done in Arc/Info by assigning asymmetrical crown area dimensions (polygons) to calculated bole displacement for each tree. Reconstruction of each time step measured any overlaps between crown polygon areas. Crown polygon overlaps estimated in this manner allowed assessment of collision frequencies, area of crown overlap during collisions, and identification of the tree(s) that a subject tree contacted. Collision statistics are only given for trees interior to the sensored cluster (n=3). For 15.0 min of data with an average wind speed of 4.5 m/s and a maximum of 10.0 m/s there was an average of 65 collisions/min for each tree, and an average collision overlap area of 24%. This frequency and depth of collisions supports the notion that wind-induced crown interaction inhibits lateral shoot extension and is an important mechanism for the development of crown asymmetry and crown shyness. Insight into dynamic tree sway behavior and crown interactions will allow estimation and cultivation of a forest stand structure that is more resistant to damage from wind. The techniques of recording multiple simultaneous bole sway and their reconstruction are applicable to a broad range of wind-forest interaction research.     

Allometric equations for integrating remote sensing imagery into forest monitoring programmes

Remote sensing is revolutionizing the way we study forests, and recent technological advances mean we are now able – for the first time – to identify and measure the crown dimensions of individual trees from airborne imagery. Yet to make full use of these data for quantifying forest carbon stocks and dynamics, a new generation of allometric tools which have tree height and crown size at their centre are needed. Here, we compile a global database of 108753 trees for which stem diameter, height and crown diameter have all been measured, including 2395 trees harvested to measure aboveground biomass. Using this database, we develop general allometric models for estimating both the diameter and aboveground biomass of trees from attributes which can be remotely sensed – specifically height and crown diameter. We show that tree height and crown diameter jointly quantify the aboveground biomass of individual trees and find that a single equation predicts stem diameter from these two variables across the world's forests. These new allometric models provide an intuitive way of integrating remote sensing imagery into large‐scale forest monitoring programmes and will be of key importance for parameterizing the next generation of dynamic vegetation models.