Replicator dominance in a eukaryotic chromosome.

Replicators are genetic elements that control initiation at an origin of DNA replication (ori). They were first identified in the yeast Saccharomyces cerevisiae as autonomously replicating sequences (ARSs) that confer on a plasmid the ability to replicate in the S phase of the cell cycle. The DNA sequences required for ARS function on a plasmid have been defined, but because many sequences that participate in ARS activity are not components of chromosomal replicators, a mutational analysis of the ARS1 replicator located on chromosome IV of S. cerevisiae was performed. The results of this analysis indicate that four DNA elements (A, B1, B2 and B3) are either essential or important for ori activation in the chromosome. In a yeast strain containing two closely spaced and identical copies of the ARS1 replicator in the chromosome, only one is active. The mechanism of replicator repression requires the essential A element of the active replicator. This element is the binding site for the origin recognition complex (ORC), a putative initiator protein. The process that determines which replicator is used, however, depends entirely upon flanking DNA sequences.     

Functional equivalency and diversity of cis-acting elements among yeast replication origins.

The DNA replication origins of the yeast Saccharomyces cerevisiae require several short functional elements, most of which are not conserved in sequence. To better characterize ARS305, a replicator from a chromosomal origin, we swapped functional DNA elements of ARS305 with defined elements of ARS1. ARS305 contains elements that are functionally exchangeable with ARS1 A and B1 elements, which are known to bind the origin recognition complex; however, the ARS1 A element differs in that it does not require a 3' box adjacent to the essential autonomously replicating sequence consensus. At the position corresponding to ARS1 B3, ARS305 has a novel element, B4, that can functionally substitute for every type of short element (B1, B2, and B3) in the B domain. Unexpectedly, the replacement of element B4 by ARS1 B3, which binds ABF1p and is known as a replication enhancer, inhibited ARS305 function. ARS305 has no short functional element at or near positions corresponding to the B2 elements in ARS1 and ARS307 but contains an easily unwound region whose functional importance was supported by a broad G+C-rich substitution mutation. Surprisingly, the easily unwound region can functionally substitute for the ARS1 B2 element, even though ARS1 B2 was found to possess a distinct DNA sequence requirement. The functionally conserved B2 element in ARS307 contains a known sequence requirement, and helical stability analysis of linker and minilinker mutations suggested that B2 also contains a DNA unwinding element (DUE). Our findings suggest that yeast replication origins employ a B2 element or a DUE to mediate a common function, DNA unwinding during initiation, although not necessarily through a common mechanism.     

Bent DNA functions as a replication enhancer in Saccharomyces cerevisiae.

Previous studies have demonstrated that bent DNA is a conserved property of Saccharomyces cerevisiae autonomously replicating sequences (ARSs). Here we showed that bending elements are contained within ARS subdomains identified by others as replication enhancers. To provide a direct test for the function of this unusual structure, we analyzed the ARS activity of plasmids that contained synthetic bent DNA substituted for the natural bending element in yeast ARS1. The results demonstrated that deletion of the natural bending locus impaired ARS activity which was restored to a near wild-type level with synthetic bent DNA. Since the only obvious common features of the natural and synthetic bending elements are the sequence patterns that give rise to DNA bending, the results suggest that the bent structure per se is crucial for ARS function.     

Drosophila ARSs contain the yeast ARS consensus sequence and a replication enhancer.

A number of restriction fragments that function as autonomously replicating sequences (ARSs) in yeast have been isolated from Drosophila melanogaster DNA. The behaviour in yeast of plasmids containing Drosophila ARS elements was studied and compared to that exhibited by the archetypal yeast ARS-1 plasmid. ARS functions were localised by subcloning and BAL-31 deletion analysis. These studies demonstrated the structural and functional complexity of Drosophila ARSs. Each Drosophila ARS element has at least two domains, one essential for replication (the replication sequence, RS) and a second (the replication enhancer, RE) which is essential for maximum function of the RS. The RS of three Drosophila ARSs was shown to contain a sequence identical to an 11 bp yeast ARS consensus sequence (5' A/T TTTATPuTTT A/T 3'). These observations lend support to the hypothesis that heterologous ARS elements may be of biological significance.     

Molecular cloning and characterization of ARS elements from the mud loach (Misgurnus mizolepis)

Autonomously replicating sequences (ARSs) are thought to occur within, or adjacent to, the matrix attachment regions (MARs). To identify fish ARSs, MARs of the mud loach fish were obtained from nuclear matrices using a modified LIS method. These DNA fragments were screened for their ability to act as ARSs by being cloned into the ARS cloning vector, pURY19, and transformed into Saccharomyces cerevisiae. Sixteen ARSs were isolated, most of which were more efficient in transformation than the positive control vector, pURY19-2 microm, which contained the 2 microm circle origin of yeast. In particular, one clone, pURY19-ARS223, was 18 times more efficient in back-transforming E. coli than the positive control vector. Therefore, ARS223, which has strong ARS activity in yeast, could be a good candidate for inclusion in expression vehicles that are used to transfect fish cell lines or embryos. A DNA sequence analysis showed that the essential ARS elements contain potential ARS consensus sequences, and are predicted to have hairpin loop structures, or curved or kinked DNA. In addition, the MAR-Finder program suggested that ARSs also contain MAR motifs. These include AT tracts, ORI patterns, kinked DNA, ATC tracts, and Topoisomerase II consensus sequences. The in vitro matrix binding assay confirmed that all of the cloned ARSs could associate with the nuclear matrix. This indicates that ARSs elements may be located in or near the MARs. This is the first study that has identified and characterized ARSs in fish.     

Control of ATP-Dependent Binding of Saccharomyces cerevisiae Origin Recognition Complex to Autonomously Replicating DNA Sequences

Eukaryotic origin recognition complexes (ORCs) play pivotal roles in the initiation of chromosomal DNA replication. ORC from the yeast, Saccharomyces cerevisiae, recognizes and binds replication origins in the late G1 phase and the binding has profound implications in the progression of the cell cycle to the S-phase. Therefore, we have quantitatively analyzed the mechanism of recognition and interaction of the yeast ORC with various elements of a yeast origin of DNA replication, the autonomously replicating sequence 1 (ARS1). ORC bound all four individual A and B elements of ARS1 with reasonably high affinities. However, the highest affinity binding was observed with a DNA sequence containing both the A and B1 elements. In addition, ATP and ADP significantly modulated the binding of ORC to the combined elements as well as modulating the binding of ORC to the element A alone or in combination with the B1 element. However, binding of ORC to individual B1, B2, and B3 elements was not responsive to nucleotides. Thus, the consensus ARS sequence in element A appeared to play a pivotal role in the ATP-dependent binding of ORC to ARS1 and likely in other ARSs or origins of DNA replication.     

A yeast replication origin consists of multiple copies of a small conserved sequence

Autonomously replicating sequences (ARSs) of the yeast S. cerevisiae function as replication origins on plasmids and probably also on chromosomes. ARS function requires a copy of the ARS core consensus (5'-[A/T]TTTAT[A/G]TTT[A/T]-3') and additional sequences 3' to the T-rich strand of the consensus. Our analysis of an ARS from chromosome III, the C2G1 ARS, suggests that ARS function depends on the presence of an exact match to the core consensus and the presence of additional near matches in the 3' flanking region. We have demonstrated that ARS function can be mediated by multiple matches to the core consensus by constructing synthetic ARS elements from oligonucleotides containing copies of the consensus sequence. We find that two copies of the core consensus are sufficient for ARS activity and that an artificial ARS as efficient as a natural chromosomal ARS can be constructed from multiple core consensus elements in a specific orientation.     

An autonomously replicating sequence of pSRI plasmid is effective in two yeast species, Zygosaccharomyces rouxii and Saccharomyces cerevisiae

The autonomously replicating sequences (ARSs) of pSR1, a cryptic circular DNA plasmid detected in a strain of Zygosaccharomyces rouxii, were delimited by subcloning and deletion analysis and by the isolation of nucleotide substitution mutations. A 30 base-pair (bp) sequence from inverted repeat 1 (IR1) and presumably the same region from IR2 of pSR1 functions as an ARS in the native host, Z. rouxii, and in a heterologous host, Saccharomyces cerevisiae. Thus, pSR1 has two ARSs per molecule, either of which is sufficient for replication of the plasmid molecule in both hosts. These hosts, however, respond differently to nucleotide substitutions in the 30 bp sequence, suggesting that the sequences required for ARS function in the two organisms are not exactly the same. In addition, a 137 bp sequence that overlaps the 30 bp sequence by 11 bp also functions as an ARS in Z. rouxii but not in S. cerevisiae. However, this 137 bp sequence enhances the stability of plasmids carrying the pSR1 ARS in S. cerevisiae. The 30 bp and 137 bp sequences each contain a single copy of the 11 bp ARS consensus sequence, which is essential for ARS function in S. cerevisiae. Small insertions between the 11 bp overlapping region and the 11 bp ARS consensus sequence showed that a proper distance between these two 11 bp sequences is essential for the ARS function of the 30 bp sequence. Point mutations that inactivate ARS function show that the ARS consensus sequence, as well as a short A:T segment in the overlapping sequence, is required for the ARS function of the 30 bp sequence.     

Yeast DNA replication in vitro: initiation and elongation events mimic in vivo processes

An enzyme system prepared from Saccharomyces cerevisiae carries out the replication of exogenous yeast plasmid DNA. Replication in vitro mimics that in vivo in that DNA synthesis in extracts of strain cdc8, a temperature-sensitive DNA replication mutant, is thermolabile relative to the wild-type, and in that aphidicolin inhibits replication in vitro. Furthermore, only plasmids containing a functional yeast replicator, ARS, initiate replication at a specific site in vitro. Analysis of replicative intermediates shows that plasmid YRp7, which contains the chromosomal replicator ARS1, initiates bidirectional replication in a 100 bp region within the sequence required for autonomous replication in vivo. Plasmids containing ARS2, another chromosomal replicator, and the ARS region of the endogenous yeast plasmid 2 microns circle give similar results, suggesting that ARS sequences are specific origins of chromosomal replication. Used in conjunction with deletion mapping, the in vitro system allows definition of the minimal sequences required for the initiation of replication.     

The basidiomycete Lentinus edodes linear mitochondrial DNA plasmid contains a segment exhibiting a high autonomously replicating sequence activity in Saccharomyces cerevisiae.

A linear DNA plasmid, designated pLLE1, has been isolated from a mitochondrial fraction of a strain of Lentinus edodes. pLLE1(11.0 kbp) was sensitive to the 3'----5'-acting exonuclease III and resistant to the 5'----3'-acting lambda exonuclease. It showed no homology with mitochondrial and nuclear genomic DNAs of plasmidless strain as well as the pLLE1-harboring host strain of L. edodes. The 1434-bp fragment (sequences) capable of autonomous replication in the yeast Saccharomyces cerevisiae (ARSs) was cloned from pLLE1 DNA with YIp32 (pBR322 containing yeast LEU2 DNA), which displayed a high ARS activity. The cloned 1434-bp fragment was shown to lie near to the end of pLLE1 DNA (nucleotides about 800-2200) and contained three consecutive ARS consensus sequences (A/T)TTTAT(A/G)TTT(A/T) of S. cerevisiae and dispersive eight ARS consensus-like sequences. The subcloned 366-bp fragment containing the three ARSs retained original ARS activity of the 1434-bp fragment.     

DNA structures associated with autonomously replicating sequences from plants

DNA fragments capable of conferring autonomous replicating ability to plasmids inSaccharomyces cerevisiae were isolated from four different plant genomes and from the Ti plasmid ofAgrobacterium tumefaciens. The DNA structure of these autonomously replicating sequences (ARSs) as well as two from yeast were studied using retardation during polyacrylamide gel electrophoresis and computer analysis as measures of sequence-dependent DNA structures. Bent DNA was found to be associated with the ARS elements. An 11 bp ARS consensus sequence required for ARS function was also identified in the elements examined and was flanked by unusually straight structures which were rich in A+T content. These results show that the ARS elements from genomes of higher plants have structural and sequence features in common with ARS elements from yeast and higher animals.Supported by Grant 1RO1-GM41708-O1 from the National Institute of Health.     

Mcm1 promotes replication initiation by binding specific elements at replication origins

Minichromosome maintenance protein 1 (Mcm1) is required for efficient replication of autonomously replicating sequence (ARS)-containing plasmids in yeast cells. Reduced DNA binding activity in the Mcm1-1 mutant protein (P97L) results in selective initiation of a subset of replication origins and causes instability of ARS-containing plasmids. This plasmid instability in the mcm1-1 mutant can be overcome for a subset of ARSs by the inclusion of flanking sequences. Previous work showed that Mcm1 binds sequences flanking the minimal functional domains of ARSs. Here, we dissected two conserved telomeric X ARSs, ARS120 (XARS6L) and ARS131a (XARS7R), that replicate with different efficiencies in the mcm1-1 mutant. We found that additional Mcm1 binding sites in the C domain of ARS120 that are missing in ARS131a are responsible for efficient replication of ARS120 in the mcm1-1 mutant. Mutating a conserved Mcm1 binding site in the C domain diminished replication efficiency in ARS120 in wild-type cells, and increasing the number of Mcm1 binding sites stimulated replication efficiency. Our results suggest that threshold occupancy of Mcm1 in the C domain of telomeric ARSs is required for efficient initiation. We propose that origin usage in Saccharomyces cerevisiae may be regulated by the occupancy of Mcm1 at replication origins.     

Analysis of chromosome III replicators reveals an unusual structure for the ARS318 silencer origin and a conserved WTW sequence within the origin recognition complex binding site

Saccharomyces cerevisiae chromosome III encodes 11 autonomously replicating sequence (ARS) elements that function as chromosomal replicators. The essential 11-bp ARS consensus sequence (ACS) that binds the origin recognition complex (ORC) has been experimentally defined for most of these replicators but not for ARS318 (HMR-I), which is one of the HMR silencers. In this study, we performed a comprehensive linker scan analysis of ARS318. Unexpectedly, this replicator depends on a 9/11-bp match to the ACS that positions the ORC binding site only 6 bp away from an Abf1p binding site. Although a largely inactive replicator on the chromosome, ARS318 becomes active if the nearby HMR-E silencer is deleted. We also performed a multiple sequence alignment of confirmed replicators on chromosomes III, VI, and VII. This analysis revealed a highly conserved WTW motif 17 to 19 bp from the ACS that is functionally important and is apparent in the 228 phylogenetically conserved ARS elements among the six sensu stricto Saccharomyces species.     

Isolation and characterization of sequences from mouse chromosomal DNA with ARS function in yeasts.

Fragments of chromosomal DNA from a variety of eucaryotes can act as ARSs (autonomously replicating sequence) in yeasts. ARSs enable plasmids to be maintained in extrachromosomal form, presumably because they function as initiation sites for DNA replication. We isolated eight different sequences from mouse chromosomal DNA which function as ARSs in Saccharomyces cerevisiae (bakers' yeast). Although the replication efficiency of the different mouse ARSs in yeasts appears to vary widely, about one-half of them functions as well as the yeast chromosomal sequence ARS1. Moreover, five of the ARSs also promote self replication of plasmids in Schizosaccharomyces pombe (fission yeast). Each of the ARSs was cloned into plasmids suitable for transformation of mouse tissue culture cells. Plasmids were introduced into thymidine kinase (TK)-deficient mouse L cells by the calcium phosphate precipitation technique in the absence of carrier DNA. In some experiments, the ARS plasmid contained the herpes simplex virus type 1 TK gene; in other experiments (cotransformations), the TK gene was carried on a separate plasmid used in the same transformation. In contrast to their behavior in yeasts, none of the ARS plasmids displayed a significant increase in transformation frequency in mouse cells compared with control plasmids. Moreover, only 1 of over 100 cell lines contained the original plasmid in extrachromosomal form. The majority of cell lines produced by transformation with an ARS TK plasmid contained multiple copies of plasmid integrated into chromosomal DNA. In most cases, results with plasmids used in cotransformations were similar to those for plasmids carrying TK. However, cell lines produced by cotransformations with plasmids containing any one of three of the ARSs (m24, m25, or m26) often contained extrachromosomal DNAs.     

Identification of the sequences required for chromosomal replicator function in Kluyveromyces lactis

The analysis of replication intermediates of a Kluyveromyces lactis chromosomal autonomous replicating sequence (ARS), KARS101, has shown that it is active as a chromosomal replicator. KARS101 contains a 50 bp sequence conserved in two other K. lactis ARS elements. The deletion of the conserved sequence in KARS101 completely abolished replicator activity, in both the plasmids and the chromosome. Gel shift assays indicated that this sequence binds proteins present in K. lactis nuclear extracts, and a 40 bp sequence, previously defined as the core essential for K. lactis ARS function, is required for efficient binding. Reminiscent of the origin replication complex (ORC), the binding appears to be ATP dependent. A similar pattern of protection of the core was seen with in vitro footprinting. KARS101 also functions as an ARS sequence in Saccharomyces cerevisiae. A comparative study using S. cerevisiae nuclear extracts revealed that the sequence required for binding is a dodecanucleotide related to the S. cerevisiae ARS consensus sequence and essential for S. cerevisiae ARS activity.     

DNA sequence and functional analysis of homologous ARS elements of Saccharomyces cerevisiae and S. carlsbergensis.

ARS elements of Saccharomyces cerevisiae are the cis-acting sequences required for the initiation of chromosomal DNA replication. Comparisons of the DNA sequences of unrelated ARS elements from different regions of the genome have revealed no significant DNA sequence conservation. We have compared the sequences of seven pairs of homologous ARS elements from two Saccharomyces species, S. cerevisiae and S. carlsbergensis. In all but one case, the ARS308-ARS308(carl) pair, significant blocks of homology were detected. In the cases of ARS305, ARS307, and ARS309, previously identified functional elements were found to be conserved in their S. carlsbergensis homologs. Mutation of the conserved sequences in the S. carlsbergensis ARS elements revealed that the homologous sequences are required for function. These observations suggested that the sequences important for ARS function would be conserved in other ARS elements. Sequence comparisons aided in the identification of the essential matches to the ARS consensus sequence (ACS) of ARS304, ARS306, and ARS310(carl), though not of ARS310.     

Characterization of human chromosomal DNA sequences which replicate autonomously in Saccharomyces cerevisiae.

We have characterised two restriction fragments, isolated from a "shotgun" collection of human DNA, which function as autonomously replicating sequences (ARSs) in Saccharomyces cerevisiae. Functional domains of these fragments have been defined by subcloning and exonuclease (BAL 31) deletion analysis. Both fragments contain two spatially distinct domains. One is essential for high frequency transformation and is termed the Replication Sequence (RS) domain, the other, termed the Replication Enhancer (RE) domain, has no inherent replication competence but is essential for ensuring maximum function of the RS domain. The nucleotide sequence of these domains reveals several conserved sequences one of which is strikingly similar to the yeast ARS consensus sequence.     

ARS binding factor I of the yeast Saccharomyces cerevisiae binds to sequences in telomeric and nontelomeric autonomously replicating sequences.

We have analyzed various autonomously replicating sequences (ARSs) in yeast nuclear extract with ARS-specific synthetic oligonucleotides. The EI oligonucleotide sequence, which is derived from HMRE-ARS, and the F1 oligonucleotide sequence, which is derived from telomeric ARS120, appeared to bind to the same cellular factor with high specificity. In addition, each of these oligonucleotides was a competitive inhibitor of the binding of the other. Binding of the ARS binding factor (ABF) to either of these oligonucleotides was inhibited strongly by plasmids containing ARS1 and telomeric TF1-ARS. DNase I footprinting analyses with yeast nuclear extract showed that EI and F1 oligonucleotides eliminated protection of the binding site of ARS binding factor I (ABFI) in domain B of ARS1. Sequence analyses of various telomeric (ARS120 and TF1-ARS) and nontelomeric ARSs (ARS1 and HMRE-ARS) showed the presence of consensus ABFI binding sites in the protein binding domains of all of these ARSs. Consequently, the ABFI and ABFI-like factors bind to these domain B-like sequences in a wide spectrum of ARSs, both telomeric and nontelomeric.     

Isolation and characterization of an autonomously replicating sequence from Ustilago maydis.

DNA fragments that function as autonomously replicating sequences (ARSs) have been isolated from Ustilago maydis. When inserted into an integrative transforming vector, the fragments increased the frequency of U. maydis transformation several-thousandfold. ARS-containing plasmids were transmitted in U. maydis as extrachromosomal elements through replication. They were maintained at a level of about 25 copies per cell but were mitotically unstable. One ARS characterized in detail, which we called UARS1, was localized to a 1.7-kilobase fragment. UARS1 contained a cluster of active sequences. This element could be reduced further into three separate subfragments, each of which retained ARS activity. The smallest one was 383 base pairs (bp) long. Although not active itself in yeast, this small fragment contained seven 8-bp direct repeats, two contiguous 30-bp direct repeats, and five 11-bp units in both orientations with sequences similar but not identical to the consensus sequence found to be crucial for ARS activity in Saccharomyces cerevisiae.