Luminescence study of monodispersed ZnS nanoparticles

Monodispersed ZnS nanoparticles have been successfully synthesized by a chemical precipitation method in an air atmosphere using polyvinylpyrrolidone (PVP) and sodium hexametaphosphate (SHMP) as surfactants. The synthesized nanoparticles were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectrometer (FT‐IR), UV–Vis optical absorption and photoluminescence (PL) spectra. Prepared surfactants capped ZnS nanoparticles are highly homogeneous and well dispersed. Optical absorption spectra showed a strong blue shift from the uncapped particles due to the quantum confinement effect. The capped ZnS emission intensity is enhanced than more the uncapped particles. The size of the synthesized particles is around 4–6.5 nm range. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of capping agent concentration on thermoluminescence and photoluminescence of copper‐doped zinc sulfide nanoparticles

Copper‐doped zinc sulfide (ZnS:Cu) nanoparticles with varying concentrations of capping agent were prepared using a chemical route technique. These particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy and X‐ray diffraction (XRD). Optical absorption studies showed that the absorption edge shifted towards the blue region as the concentration of the capping agent increased. Using effective mass approximation, calculation of the nanoparticle size indicated that effective band gap energy increases with decreasing particle size. The thermoluminescence (TL) properties of sodium hexameta phosphate (SHMP)‐passivated ZnS:Cu nanoparticles were investigated after UV irradiation at room temperature. The TL glow curve of capped ZnS:Cu showed variations in TL peak position and intensity with the change in capping agent concentration. The photoluminescence (PL) spectra of ZnS:Cu nanoparticles excited at 254 nm exhibited a broad green emission band peaking around 510 nm, which confirmed the characteristic feature of Zn²⁺ as well as Cu²⁺ ions as the luminescent centres in the lattice. The PL spectra of ZnS:Cu nanoparticles with increasing capping agent concentrations revealed that the emission becomes more intense and shifted towards shorter wavelengths as the sizes of the samples were reduced. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of thiol capping on the photoluminescence properties of L‐cysteine‐, mercaptoethanol‐ and mercaptopropionic acid‐capped ZnS nanoparticles

Mercaptoethanol (ME), mercaptopropionic acid (MPA) and L‐cysteine (L‐Cys) having ‐SH functional groups were used as surface passivating agents for the wet chemical synthesis of ZnS nanoparticles. The effect of the thiol group on the optical and photoluminescence (PL) properties of ZnS nanoparticles was studied. L‐Cysteine‐capped ZnS nanoparticles showed the highest PL intensity among the studied capping agents, with a PL emission peak at 455 nm. The PL intensity was found to be dependent on the concentration of Zn²⁺ and S^2– precursors. The effect of buffer on the PL intensity of L‐Cys‐capped ZnS nanoparticles was also studied. UV/Vis spectra showed blue shifting of the absorption edge. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,characterization and optical properties of polymer‐based ZnS nanocomposites

Nanostructured polymer–semiconductor hybrid materials such as ZnS–poly(vinyl alcohol) (ZnS–PVA), ZnS–starch and ZnS–hydroxypropylmethyl cellulose (Zns–HPMC) are synthesized by a facile aqueous route. The obtained nanocomposites are characterized using various techniques such as X‐ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), UV/vis spectroscopy and photoluminescence (PL). XRD studies confirm the zinc blende phase of the nanocomposites and indicate the high purity of the samples. SEM studies indicate small nanoparticles clinging to the surface of a bigger particle. The Energy Dispersive Analysis by X‐rays (EDAX) spectrum reveals that the elemental composition of the nanocomposites consists primarily of Zn:S. FTIR studies indicate that the polymer matrix is closely associated with ZnS nanoparticles. The large number of hydroxyl groups in the polymer matrix facilitates the complexation of metal ions. The absorption spectra of the specimens show a blue shift in the absorption edge. The spectrum reveals an absorption edge at 320, 310 and 325 nm, respectively. PL of nanocomposites shows broad peaks in the violet–blue region (420–450 nm). The emission intensity changes with the nature of capping agent. The PL intensity of ZnS–HPMC nanocomposites is found to be highest among the studied nanocomposites. The results clearly indicate that hydroxyl‐functionalized HPMC is much more effective at nucleating and stabilizing colloidal ZnS nanoparticles in aqueous suspensions compared with PVA and starch. Copyright © 2015 John Wiley & Sons, Ltd.     

Tuneable luminescence properties of EDTA‐assisted ZnS:Mn nanocrystals from a yellow‐orange to a red emission band

Luminescence technology has been improved with the help of semiconductor nanoparticles that possess novel optical and electrical properties compared with their bulk counterpart. The aim of this study was to design semiconductor nanocrystals in their pure (ZnS) or doped form (ZnS:Mn) with different concentrations of Mn²⁺ ions by a wet chemical route stabilized by ethylenediamine tetra‐acetic acid (EDTA) and to evaluate their luminescence properties. The nanocrystals were characterized by physicochemical techniques such as X‐ray diffraction (XRD), High‐resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), EDS, and ultraviolet (UV)–visible light and photoluminescence (PL) studies. These results showed the presence of cubic phase and spherically shaped nanocrystals. A blue shift with respect to their bulk counterpart was observed. PL emission spectra were observed with a fixed blue peak and the yellow‐orange bands were red shifted towards the red region under the same excitation wavelength. The orange‐red bands were attributed to the radiation transition of electrons in 3d5 unfilled shells of Mn²⁺ ions [⁴T₁(⁴G)‐⁶A₁(⁶S)]; the ZnS matrix varied with Mn²⁺ concentration. Shift and increase in the intensity of the PL and absorption bands were observed with increase in Mn content. The study showed that Mn²⁺‐doped ZnS nanocrystal emission bands can be tuned from the yellow‐orange to the red regions under a controlled synthesis process and could be used as promising luminescent emitters in the biology field upon functionalization with suitable materials. Further studies on construction with various other materials will be useful for practical applications.     

Synthesis,effect of capping agents and optical properties of manganese‐doped zinc sulphide nanoparticles

Mn²⁺‐doped ZnS nanoparticles have been successfully synthesized by a chemical precipitation method, using non‐ionic surfactants such as PMMA and PEG. The particles were prepared in an air atmosphere at 80°C. X‐ray diffraction (XRD), transmission electron microscopy (TEM), UV‐visible and photoluminescence (PL) studies were used to investigate the effect of the capping agent on the size, morphology and optical properties of the ZnS–Mn²⁺ nanoparticles. Enhanced PL was observed from the surfactant‐capped ZnS–Mn²⁺ nanoparticles. The PL spectra showed a broad blue emission band in the range 460–445 nm and a Mn²⁺‐related yellow‐orange emission band in the range 581–583 nm. Copyright © 2012 John Wiley & Sons, Ltd.     

Optical and structural characterization of CdS/ZnS and CdS:Cu2+/ZnS core–shell nanoparticles

Core‐shell CdS/ZnS (Zn 0.025?0.125 M) and CdS:Cu²⁺(1%)/ZnS nanoparticles were successfully synthesized using a chemical method. X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR TEM), photoluminescence (PL) and UV/Visible (UV/Vis) techniques were used to characterize the novel CdS/ZnS and CdS:Cu²⁺/ZnS core–shell nanoparticles. All absorption peaks of the synthesized samples were highly blue‐shifted from the bulk CdS and ZnS. Very narrow and symmetric PL emission was observed in the yellow region for core–shell CdS/ZnS. Furthermore, the PL emission of CdS/ZnS was tuned into orange region by incorporate the Cu ion into the core CdS lattice. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV‐assisted) approach using Na2SeO3 as Se source and investigating optical properties

In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na₂SeO₃ as the Se source by a rapid and room temperature photochemical (UV‐assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV–visible (UV–vis) spectroscopy, Fourier transform‐infrared (FT‐IR), and energy dispersive X‐ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round‐shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the ²T₂ acceptor levels of Cu²⁺. The emission was increased by increasing the Cu²⁺ ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%.     

Novel Na+ doped Alq3 hybrid materials for organic light‐emitting diode (OLED) devices and flat panel displays

Pure and Na⁺‐doped Alq₃ complexes were synthesized by a simple precipitation method at room temperature, maintaining a stoichiometric ratio. These complexes were characterized by X‐ray diffraction, Fourier transform infrared (FTIR), UV/Vis absorption and photoluminescence (PL) spectra. The X‐ray diffractogram exhibits well‐resolved peaks, revealing the crystalline nature of the synthesized complexes, FTIR confirms the molecular structure and the completion of quinoline ring formation in the metal complex. UV/Vis absorption and PL spectra of sodium‐doped Alq₃ complexes exhibit high emission intensity in comparison with Alq₃ phosphor, proving that when doped in Alq₃, Na⁺ enhances PL emission intensity. The excitation spectra of the synthesized complexes lie in the range 242–457 nm when weak shoulders are also considered. Because the sharp excitation peak falls in the blue region of visible radiation, the complexes can be employed for blue chip excitation. The emission wavelength of all the synthesized complexes lies in the bluish green/green region ranging between 485 and 531 nm. The intensity of the emission wavelength was found to be elevated when Na⁺ is doped into Alq₃. Because both the excitation and emission wavelengths fall in the visible region of electromagnetic radiation, these phosphors can also be employed to improve the power conversion efficiency of photovoltaic cells by using the solar spectral conversion principle. Thus, the synthesized phosphors can be used as bluish green/green light‐emitting phosphors for organic light‐emitting diodes, flat panel displays, solid‐state lighting technology – a step towards the desire to reduce energy consumption and generate pollution free light. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of synthesis method and chemical reagents on the structural parameters,particle size,and optical and photoluminescence properties of ZnS nanostructures

In this experimental study, ZnS nanostructures were synthesized using two hydrothermal and co‐precipitation methods with different precursors. Different reagents and precursors were changed to obtain the best product size and morphology. The structure and crystal phase of the products were studied using X‐ray diffraction (XRD) patterns. Some structural parameters were calculated using the XRD results and a product composition was obtained by energy dispersive X‐ray (EDX) analysis and Fourier transform infrared (FT‐IR) spectra to study the chemical composition. The size and morphology of ZnS nanostructures were obtained by scanning electron microscopy (SEM). The optical properties of the synthesized ZnS nanostructures were examined using ultraviolet–visible (UV–Vis) spectra to estimate the optical band gap. Band gap energies were higher than those in the ZnS bulk sample, mainly due to quantum size effects. The photoluminescence (PL) properties of the products were investigated using PL spectra. The results showed the effect of two factors, namely synthesis method and chemical reagents, on the structure parameters, crystallite size, product size and morphology, and optical and PL properties.     

Highly luminescent and biocompatible,l‐citrulline‐capped ZnS:Mn nanocrystals for rapid screening of metal accumulating Lysinibacillus fusiformis bacteria

Biocompatible and highly luminescent manganese doped zinc sulfide (ZnS:Mn) nanocrystals of average particle size 10 nm have been synthesized by capping with a novel amino acid ligand, l ‐citrulline. Though there are many reports on the bioimaging applications of nanostructured semiconductors, the present study focused on the detection of a special type of metal accumulating bacteria, Lysinibacillus fusiformis. This bacterium has significant applications in the disposal of metal components from industrial effluents. In this context, the detection of this bacterium is quite important and the present work demonstrates a novel technique for this bacterial detection. The synthesized nanocrystals were attached to Lysinibacillus fusiformis and characteristics of the bioconjugated system were studied. The blue shift observed in the ultraviolet‐visible absorption and photoluminescence spectra of the bioconjugated system, confirms conjugation of the Lysinibacillus fusiformis with l ‐citrulline‐capped ZnS:Mn. When the bioconjugated system (capped ZnS:Mn + bacteria) was observed using a fluorescent microscope under excitation wavelengths 365.4 nm (ultraviolet), 435.8 nm (blue) and 546.1 nm (green), fluorescence emissions were obtained in yellow, green and red regions respectively. The study of relative growth of Lysinibacillus fusiformis in the presence of l ‐citrulline‐capped ZnS:Mn proves biocompatible property of these nanocrystals and their tunable color properties under different excitation wavelengths make them ideal for biolabeling applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of pure and Li+ activated Alq3 complexes for green and blue organic light emitting diodes and display devices

Pure and Li⁺‐doped Alq₃ complexes were synthesized by simple precipitation method at room temperature, maintaining the stoichiometric ratio. These complexes were characterized by X‐ray diffraction, ultraviolet‐visible absorption and Fourier transform infrared and photoluminescence (PL) spectra. X‐ray diffraction analysis reveals the crystalline nature of the synthesized complexes, while Fourier transform infrared spectroscopy confirm the molecular structure, the completion of quinoline ring formation and presence of quinoline structure in the metal complex. Ultraviolet‐visible and PL spectra revealed that Li⁺ activated Alq₃ complexes exhibit the highest intensity in comparison to pure Alq₃ phosphor. Thus, Li⁺ enhances PL emission intensity when doped into Alq₃ phosphor. The excitation spectra lie in the range of 383–456 nm. All the synthesized complexes other than Liq give green emission, while Liq gives blue emission with enhanced intensity. Thus, he synthesized phosphors are the best suitable candidates for green‐ and blue‐emitting organic light emitting diode, PL liquid‐crystal display and solid‐state lighting applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermoluminescence of mercaptoethanol‐capped ZnS:Mn nanoparticles

The thermoluminescence (TL) of nanoparticles has become a matter of keen interest in recent times but is rarely reported. This article reports the synthesis of ZnS:Mn nanocrystals using a chemical route, with mercaptoethanol (ME) as the capping agent. The particle sizes for the nanocrystals were measured by X‐ray diffraction (XRD) and also by studying transmission electron microscopy (TEM) patterns. The particle sizes of the synthesized samples were found to be between 1 and 3 nm. For samples with different concentrations of the capping agent, it was found that the TL intensity of the ZnS:Mn nanoparticles increased as the particle size decreased. A shift in the peak position of the TL glow curve was also seen with decreasing particle size. The TL intensity was found to be maximal for samples with 1.2% of Mn. A change in the peak position was not found for samples with different concentrations of Mn. The half‐width glow peak curve method was used to determine the trap‐depth. The frequency factor of the synthesized samples was also calculated. The stability of the charge carriers in the traps increases with decreasing nanoparticle size. The higher stability may be attributed to the higher surface/volume ratio and also to the increase in the trap‐depth with decreasing particle size. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural characterization of Er3+,Yb3+‐doped Gd2O3 phosphor,synthesized using the solid‐state reaction method,and its luminescence behavior

We report the synthesis and structural characterization of Er³⁺,Yb³⁺‐doped Gd₂O₃ phosphor. The sample was prepared using the conventional solid‐state reaction method, which is the most suitable method for large‐scale production. The prepared phosphor sample was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd₂O₃ phosphor doped with Er³⁺ and Yb³⁺ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light‐emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er³⁺ and Yb³⁺‐doped Gd₂O₃ phosphor is ~ 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation,characterization and luminescent properties of dense nano‐silica hybrids loaded with 1,8‐naphthalic anhydride

Novel luminescent dense nano‐silica hybrid materials (DNSS) modified with different amounts of (3‐aminopropyl)triethoxysilane (APTES) and 1,8‐naphthalic anhydride (NA) were successfully synthesized via two steps combined with post‐grafting methods. Powder X‐ray diffraction (XRD), N₂‐sorption analysis, Fourier transform infrared (FT‐IR) spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), photoluminescence (PL) spectroscopy and elemental analysis, as well as time‐resolved decays were employed to characterize the resultant hybrid materials. The results revealed that luminescent organic molecules had been successfully loaded onto the amine‐modified surface of nano‐silica spheres. In addition, their fluorescence intensity and characteristic peak of emission spectra changed with increasing amount of APTES and NA additive. In particular, the characteristic peak showed a red shift from 390 to 450 nm, however, this was inconsistent with results calculated on the basis of the elemental analysis data, most probably because of the dispersion behaviors of NA molecules from the aggregating to the monolayer state. These observations demonstrated the existence of a quantum confinement effectiveness of NA–DNSS samples, and therefore a possible mechanism was put forward. Copyright © 2013 John Wiley & Sons, Ltd.     

Blue emitting ZnO nanostructures grown through cellulose bio‐templates

This paper presents a green and cost‐effective recipe for the synthesis of blue‐emitting ZnO nanoparticles (NPs) using cellulose bio‐templates. Azadirachta indica (neem) leaf extract prepared in different solvents were used as biological templates to produce nanostructures of wurtzite ZnO with a particle size ~12–36 nm. A cellulose‐driven capping mechanism is used to describe the morphology of ZnO NPs. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform infra‐red (FTIR) and photoluminescence (PL) studies showed that solvents affect the growth process and the capping mechanism of bio‐template severely. Structural changes in ZnO NPs were evident with variation in pH, dielectric constants (DC) and boiling points (BP) of solvents. Furthermore, an energy band model is proposed to explain the origin of the blue emission in the as‐obtained ZnO NPs. PL excitation studies and the theoretical enthalpy values of individual defects were used to establish the association between the interstitial‐zinc‐related defect levels and the blue emission. Copyright © 2015 John Wiley & Sons, Ltd.     

Enantioselective cytotoxicity of ZnS:Mn quantum dots in A549 cells

Chirality strongly influences many biological properties of materials, such as cell accumulation, enzymatic activity, and toxicity. In the past decade, it has been shown that quantum dots (QDs), fluorescent semiconductor nanoparticles with unique optical properties, can demonstrate optical activity due to chiral ligands bound on their surface. Optically active QDs could find potential applications in biomedical research, therapy, and diagnostics. Consequently, it is very important to investigate the interaction of QDs capped with chiral ligands with living cells. The aim of our study was to investigate the influence of the induced chirality of Mn‐doped ZnS QDs on the viability of A549 cells. These QDs were stabilized with D‐ and L‐cysteine using a ligand exchange technique. The optical properties of QDs were studied using UV–Vis, photoluminescence (PL), and circular dichroism (CD) spectroscopy. The cytotoxicity of QDs was investigated by high content screening analysis. It was found that QDs stabilized by opposite ligand enantiomers, had identical PL and UV–Vis spectra and mirror‐imaged CD spectra, but displayed different cytotoxicity: QDs capped with D‐cysteine had greater cytotoxicity than L‐cysteine capped QDs.     

Blue excitable green emitting Ce3+ doped CaS phosphor for w‐LEDs

CaS:Ce³⁺ is an efficient green‐emitting (535 nm) phosphor, excitable with blue light (450–470 nm) and was synthesized via a solid‐state reaction method by heating under a reducing atmosphere. The luminescent properties, photoluminescent (PL) excitation and emission of the phosphor were analyzed by spectrofluorophotometry. The excitation and emission peaks of the CaS:Ce³⁺ phosphor lay in the visible region, which made them relevant for light‐emitting diode (LED) application for the generation of white light. Judd‐Oflet parameters were calculated and revealed that green light emitted upon blue illumination. The prepared phosphor had strong blue absorption at 470 nm and a broad green emission band range from 490–590 nm with the peak at 537 nm. The characteristics of the CaS:Ce³⁺ phosphor make it suitable for use as a wavelength tunable green emitting phosphor for three band white LEDs pumped by a blue LED (470 nm). The Commission International de l'Eclairage co‐ordinates were calculated by a spectrophotometric method using the spectral energy distribution (0.304, 0.526) and confirm the green emission. The potential application of this phosphor is as a phosphor‐converted white light‐emitting diode. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence studies of a Li2Ca1−xSiO4:xSm3+ phosphor for the generation of white light under NUV-excited phosphor converting LEDs

In this paper, we present new aspects of Sm³⁺-doped pure Li₂CaSiO₄ as a suitable candidate for white light emitting diode (WLED) applications. The samples were mainly prepared using a conventional modified solid-state synthesis technique. The structural studies were done using X-ray diffraction and Rietveld refinement. Instruments such as a scanning electron microscope (SEM) were used to obtain information about the morphology of the as-prepared samples. Photoluminescence (PL) analysis of phosphor samples for variable concentrations of doping ions with variable excitations were presented. When doped with Sm³⁺ in host Li₂CaSiO₄ it emitted intense blue, green and red emissions and a more intense red emission peak (605 nm) under 408 nm excitation (near-UV–blue). Our study shows that the as-prepared phosphor may be useful for optical devices and mainly for WLEDs. The corresponding transitions of doping ions and concentration quenching effect were studied in detail. The 1931 Commission Internationale de l'Eclairage (x, y) chromaticity coordinates showed the distribution of spectral regions calculated from PL emission spectra and this was found (0.63, 0.36) in the red region, so the phosphor may be useful for near-UV–blue excited WLED applications.     

Characterization and luminescence properties of CaMgSi2O6:Eu2+ blue phosphor

A blue CaMgSi₂O₆:Eu²⁺ phosphor was prepared by the solid‐state reaction method and the phosphor characterized in terms of crystal structure, particle size, photoluminescence (PL), thermoluminescence (TL) and mechanoluminescence (ML) properties using X‐ray diffraction (XRD), transmission electron microscopy (TEM), PL spectroscopy, TLD reader and ML impact technique. The XRD result shows that phosphor is formed in a single phase and has a monoclinic structure with the space group C2/c. Furthermore, the PL excitation spectra of Eu²⁺‐doped CaMgSi₂O₆ phosphor showed a strong band peak at 356 nm and the PL emission spectrum has a peak at 450 nm. The depths and frequency factors of trap centers were calculated using the TL glow curve by deconvolution method in which the trap depths were found to be 0.48 and 0.61 eV. The formation of CaMgSi₂O₆:Eu²⁺ phosphor was confirmed by Fourier transform infrared spectroscopy. The ML intensity increased linearly with the impact velocity of the piston used to deform the phosphor. It was shown that the local piezoelectricity‐induced electron bombardment model is responsible for the ML emission. Finally, the optical properties of CaMgSi₂O₆:Eu²⁺ phosphors are discussed. Copyright © 2015 John Wiley & Sons, Ltd.