Surface metabolites of the brown alga Taonia atomaria have the ability to regulate epibiosis

This study aimed to improve understanding of the strategies developed by the Mediterranean seaweed Taonia atomaria to chemically control bacterial epibiosis. An experimental protocol was optimized to specifically extract algal surface-associated metabolites by a technique involving dipping in organic solvents whilst the integrity of algal cell membranes was assessed by fluorescent microscopy. This methodology was validated using mass spectrometry-based profiles of algal extracts and analysis of their principal components, which led to the selection of methanol as the extraction solvent with a maximum exposure time of 15 s. Six compounds (A–F) were identified in the resulting surface extracts. Two of these surface-associated compounds (B and C) showed selective anti-adhesion properties against reference bacterial strains isolated from artificial surfaces while remaining inactive against epibiotic bacteria of T. atomaria. Such specificity was not observed for commercial antifouling biocides and other molecules identified in the surface or whole-cell extracts of T. atomaria.     

Booster biocides and microfouling

Antifouling (AF) paints are used to prevent the attachment of living organisms to the submerged surfaces of ships, boats and aquatic structures, usually by the release of biocides. Apart from copper, organic booster biocides are the main active components in AF paints, but their use can have a negative impact on the marine environment. The direct effects of biocides on marine bacteria are poorly known. This work investigates the impact of two biocides, viz. diuron and tolylfluanid, on the growth and the viability of marine microorganisms and on their ability to form biofilms. The biocides in solution were found to inhibit growth of two strains of marine bacteria, viz. Pseudoalteromonas and Vibrio vulnificus, at a high concentration (1000 μg ml^?1), but only a small effect on viability was observed. Confocal laser scanning microscopy (CLSM) showed that the booster biocides decreased biofilm formation by both bacteria. At a concentration of 10 μg ml^?1, the biocides inhibited cell attachment and reduced biofilm thickness on glass surfaces. The percentage of live cells in the biofilms was also reduced. The effect of the biocides on two diatoms, Fragilaria pinnata and Cylindrotheca closterium, was also evaluated in terms of growth rate, biomass, chlorophyll a content and attachment to glass. The results demonstrate that diuron and tolylfluanid are more active against diatoms than bacteria.     

The use of biocides to control sulphate‐reducing bacteria in biofilms on mild steel surfaces

Three different types of biocides, viz. formaldehyde (FM), glutaraldehyde (GA) and isothiozolone (ITZ) were used to control planktonic and sessile populations of two marine isolates of sulphate‐reducing bacteria (SRB). The influence of these biocides on the initial attachment of cells to mild steel surfaces, on subsequent biofilm formation and on the activity of hydrogenase enzymes within developed biofilms was evaluated. In the presence of biocides the rate and degree of colonization of mild steel by SRB depended on incubation time, bacterial isolate and the type of biocide used. Although SRB differed in their susceptibility to biocides, for all isolates the biofilm population was more resistant to the treatment than the planktonic population. GA showed highest efficiency in controlling planktonic and sessile SRB compared with the other two biocides. The activity of the enzyme hydrogenase measured in SRB biofilms varied between isolates and with the biocide treatment. No correlation was found between the number of sessile cells and hydrogenase activity.     

Identification of rosmarinic acid and sulfated flavonoids as inhibitors of microfouling on the surface of eelgrass Zostera marina

A bioassay-guided approach was used to identify defense compounds that are present on the surface of Zostera marina and which inhibit settlement of microfoulers at natural concentrations. Moderately polar eelgrass surface extracts inhibited the settlement of seven marine bacteria and one yeast that originated from non-living substrata. In contrast, five other bacterial strains that had been directly isolated from eelgrass surfaces were all insensitive, which suggested a selective effect of surface metabolites on the microbial communities present on eelgrass. Bioassay-guided isolation of active compounds from the extracts in combination with UPLC-MS and ¹H-NMR spectroscopy resulted in the identification of rosmarinic acid, luteolin-7-sulfate and diosmetin-7-sulfate or its isomer chrysoeriol-7-sulfate. All three compounds are nontoxic repellents, as they did not inhibit bacterial growth, but prevented bacterial settlement in a dose-dependent manner. Between 15.6 and 106.8 μg ml^?1 of rosmarinic acid were present on the eelgrass surface, enough for half maximal settlement inhibition of bacteria.     

Adaptation of Campylobacter jejuni to biocides used in the food industry affects biofilm structure,adhesion strength,and cross-resistance to clinical antimicrobial compounds

The emergence of biocide-adapted Campylobacter jejuni strains that developed into biofilms and their potential to develop clinical resistance to antimicrobial compounds was studied. C. jejuni was grown in sub-lethal concentrations of five biocides used in the food industry. C. jejuni exhibited adaptation to these biocides with increased minimum inhibitory concentrations. The 3-D structures of the biofilms produced by the biocide-adapted cells were investigated by atomic force microscopy (AFM). The results revealed marked variability in biofilm architecture, including ice-crystal-like structures. Adaptation to the biocides enhanced biofilm formation, with significant increases in biovolume, surface coverage, roughness, and the surface adhesion force of the biofilms. Adaptation to commercial biocides induced resistance to kanamycin and streptomycin. This study suggests that the inappropriate use of biocides may lead to cells being exposed to them at sub-lethal concentrations, which can result in adaptation of the pathogens to the biocides and a subsequent risk to public health.     

Influence of the Surface Topography of Stainless Steel on Bacterial Adhesion

Bacterial adhesion on stainless steel may cause problems such as microbially induced corrosion or represent a chronic source of microbial contamination. The investigation focussed on how the extent and patterns of four bacterial species comprising three different phyla and a broad variety of physicochemical characteristics was influenced by the surface topography of AISI 304 stainless steel. Five types of surface finish corresponding to roughness values R a between 0.03 and 0.89 w m were produced. Adhesion of all four bacteria was minimal at R a =0.16 w m, whereas smoother and rougher surfaces gave rise to more adhesion. This surface exhibited parallel scratches of 0.7 w m, in which a high proportion of bacteria of three of the strains aligned. Reduced overall adhesion was attributed to unfavorable interactions between this surface and bacteria oriented other than parallel to the scratches. Interaction energy calculations and considerations of micro-geometry confirmed this mechanism. Rougher surfaces exhibiting wider scratches allowed a higher fraction of bacteria to adhere in other orientations, whereas the orientation of cells adhered to the smoothest surface was completely random.     

Resistance mechanisms of bacteria to antimicrobial compounds

A range of antimicrobial compounds (bactericides) commonly termed biocides, microbicides, sanitizers, antiseptics and disinfectants are available, all of which are claimed by their producers to kill bacteria. Resistance has been defined as the temporary or permanent ability of an organism and its progeny to remain viable and/or multiply under conditions that would destroy or inhibit other members of the strain. Bacteria may be defined as resistant when they are not susceptible to a concentration of antibacterial agent used in practice. Traditionally, resistance refers to instances where the basis of increased tolerance is a genetic change, and where the biochemical basis is known. Antimicrobial substances target a range of cellular loci, from the cytoplasmic membrane to respiratory functions, enzymes and the genetic material. However, different bacteria react differently to bactericides, either due to inherent differences such as unique cell envelope composition and non-susceptible proteins, or to the development of resistance, either by adaptation or by genetic exchange. At low concentrations bactericides often act bacteriostatically, and are only bacteriocidal at higher concentrations. For bactericides to be effective, they must attain a sufficiently high concentration at the target site in order to exert their antibacterial action. In order to reach their target site(s), they must traverse the outer membrane of the gram negative bacteria. Bacteria with effective penetration barriers to biocides generally display a higher inherent resistance than those bacteria which are readily penetrated. The rate of penetration is linked to concentration, so that a sufficiently high bactericide concentration will kill bacteria with enhanced penetration barriers. It has been indicated that susceptible bacterial isolates acquire increased tolerance to bactericides following serial transfer in sub-inhibitory concentrations. Whereas the basis of bacterial resistance to antibiotics is well know, that of resistance to antiseptics, disinfectants and food preservatives is less well understood.Three mechanisms of resistance that have been reported include:

• limited diffusion of antimicrobial agents through the biofilm matrix,

• interaction of the antimicrobial agents with the biofilm matrix (cells and polymer),

• enzyme mediated resistance,

• level of metabolic activity within the biofilm

• genetic adaptation

• efflux pumps and

• outer membrane structure.

     

Bacterial Deterioration of Marble Monuments: A Case Study of the Conservation Project of Acropolis Monuments

The deterioration of the Acropolis monuments’ surface can be attributed to a combination of mechanical, physical, chemical and biological factors. The aim of this work was to investigate the potential use of biocides suitable for marble surface in order to confront the biodeterioration phenomenon due to heterotrophic bacteria. Surface bacterial populations were studied in respect to the application of three biocide agents. A significant decrease of the bacterial counts was occurred after the biocides’ application and remained less compared with the counts occurred on the untreated surfaces for more than 14 months. A gradual diminution of bacterial diversity was also observed leading to the survival of specific Gram positive strains.     

Biomolecules in multilayer film for antimicrobial and easy-cleaning stainless steel surface applications

Microorganisms are able to attach to, grow on, and ultimately form biofilms on a large variety of surfaces, such as industrial equipment, food contact surfaces, medical implants, prostheses and operating rooms. Once organized into biofilms, bacteria are difficult to remove and kill, which increases the risk of cross-contamination and infection. One way to address the problem may thus be to develop antibacterial, anti-adhesion, ‘easy cleaning’ surfaces. In this study, stainless steel (SS) surfaces with antibacterial properties were created by embedding several antimicrobial peptides in a multilayer film architecture. The biocidal effect of these surfaces was demonstrated against both Gram-positive and Gram-negative bacteria according to two ISO tests. Also, coating SS surfaces with either mucin or heparin led to a reduction of S. epidermidis adhesion of almost 95% vs the bare substratum. Finally, by combining both antibacterial and anti-adhesion biomolecules in the same multilayer film, SS surfaces with better cleanability were produced. This surface coating property may help to delay the buildup of a dead bacterial layer which is known to progressively reduce exposure of the coating, leading to an undesirable decrease in the antibacterial effect of the surface.     

Kinetics of conditioning layer formation on stainless steel immersed in seawater

Adhesion of microorganisms to surfaces in marine environments leads to biofouling. The deleterious effects of biofilm growth in the marine environment are numerous and include energy losses due to increased fluid frictional resistance or to increased heat transfer resistance, the risk of corrosion induced by microorganisms, loss of optical properties, and quality control and safety problems. Antifouling agents are generally used to protect surfaces from such a biofilm. These agents are toxic and can be persistent, causing harmful environmental and ecological effects. Moreover, the use of biocides and regular cleaning considerably increase the maintenance costs of marine industries. An improved knowledge of bio‐film adhesion mechanisms is needed for the development of an alternative approach to the currently used antifouling agents. The aim of this study is to characterise the chemical composition of the molecules first interacting with stainless steel during the period immediately following immersion in natural seawater and to elucidate the kinetics of the adsorbtion process. Proteins are shown to adhere very rapidly, closely followed by carbohydrates. The distribution on the surface of organic molecules is also examined. The ad‐sorbate on the surface is not a continuous film but a heterogeneous deposit, whose average thickness varies widely. The cleaning procedures used affect the adsorption kinetics. In particular, cleaning with hexane results in slower adsorption of nitrogen‐containing species than does cleaning in acetone.     

Bacterial target sites for biocide action

Although biocides have been used for a century, the number of products containing biocides has recently increased dramatically with public awareness of hygiene issues. The antimicrobial efficacy of biocides is now well documented; however, there is still a lack of understanding of their antimicrobial mechanisms of action. There is a wide range of biocides showing different levels of antimicrobial activity. It is generally accepted that, in contrast to chemotherapeutic agents, biocides have multiple target sites within the microbial cell and the overall damage to these target sites results in the bactericidal effect. Information about the antimicrobial efficacy of a biocide (i.e. the eta-value) might give some useful indications about the overall mode of action of a biocide. Bacteriostatic effects, usually achieved by a lower concentration of a biocide, might correspond to a reversible activity on the cytoplasmic membrane and/or the impairment of enzymatic activity. The bacteriostatic mechanism(s) of action of a biocide is less documented and a primary (unique?) target site within the cell might be involved. Understanding the mechanism(s) of action of a biocide has become an important issue with the emergence of bacterial resistance to biocides and the suggestion that biocide and antibiotic resistance in bacteria might be linked. There is still a lack of understanding of the mode of action of biocides, especially when used at low concentrations (i.e. minimal inhibitory concentration (MIC) or sublethal). Although this information might not be required for highly reactive biocides (e.g. alkylating and oxidizing agents) and biocides used at high concentrations, the use of biocides as preservatives or in products at sublethal concentrations, in which a bacteriostatic rather than a bactericidal activity is achieved, is driving the need to better understand microbial target sites. Understanding the mechanisms of action of biocides serves several purposes: (i) it will help to design antimicrobial formulations with an improved antimicrobial efficacy and (ii) it will ensure the prevention of the emergence of microbial resistance.     

Synthesis,characterization and in vitro activity of a surface-attached antimicrobial cationic peptide

Infection associated with implanted biomaterials is common and costly and such infections are extremely resistant to antibiotics and host defenses. Consequently, there is a need to develop surfaces which resist bacterial adhesion and colonization. The broad spectrum synthetic cationic peptide melimine has been covalently linked to a surface via two azide linkers, 4-azidobenzoic acid (ABA) or 4-fluoro-3-nitrophenyl azide (FNA), and the resulting surfaces characterized by X-ray photoelectron spectroscopy and contact angle measurements. The quantity of bound peptide was estimated by a modified Bradford assay. The antimicrobial efficacy of the two melimine-modified surfaces against Pseudomonas aeruginosa and Staphylococcus aureus was compared by scanning electron microscopy (SEM) and fluorescence microscopy. Attachment of melimine via ABA gave an approximately 4-fold greater quantity of melimine bound to the surface than attachment via FNA. Surfaces melimine-modified by either attachment strategy showed significantly reduced bacterial adhesion for both strains of bacteria. P. aeruginosa exposed to ABA–melimine and FNA–melimine surfaces showed marked changes in cell morphology when observed by SEM and a reduction of approximately 15-fold (p < 0.001) in the numbers of adherent bacteria compared to controls. For the ABA–melimine surface there was a 33% increase in cells showing damaged membranes (p = 0.0016) while for FNA–melimine there was no significant difference. For S. aureus there were reductions in bacterial adhesion of approximately 40-fold (p < 0.0001) and 5-fold (p = 0.008) for surfaces modified with melimine via ABA or FNA, respectively. There was an increase in cells showing damaged membranes on ABA–melimine surfaces of approximately 87% (p = 0.001) compared to controls, while for FNA–melimine there was no significant difference observed. The data presented in this study show that melimine has excellent potential for development as a broad spectrum antimicrobial coating for biomaterial surfaces. Further, it was observed that the efficacy of antimicrobial activity is related to the method of attachment.     

Cell membrane effects of some common biocides

Many antimicrobial compounds exhibit bacterial cell membrane activity as either potassium ion leakage and/or leakage of material that absorbs at 260 nm from the cell. In this experiment a potassium ion selective electrode and spectophotometric observation of 260-nm leakage were used in order to examine cell membrane effects in a selection of common biocides upon both Escherichia coli NCIMB 10000 and Pseudomonas aeruginosa NCIMB 10548. The observation of potassium ion leakage for pyrithione biocides yielded results which were initially difficult to interpret, but are thought to suggest a species-dependent combination of potassium ion leakage from affected membranes and chelation of those leaked ions in the bathing suspension. Such a result is not, however, supported by the 260-nm material leakage results, which indicate very similar levels of membrane active effects for both species of bacteria. Received 27 February 1998/ Accepted in revised form 4 July 1998     

Analysis of biocide transport limitation in an artificial biofilm system

An alginate gel bead artificial biofilm system was used to assay biofilm susceptibility to four biocides and to analyse the extent to which each agent penetrated the biofilm. Chlorine, glutaraldehyde, an isothiazolone, and a quaternary ammonium compound were tested on alginate-entrapped Enterobacter aerogenes in gel beads ranging from 1·8 to 6 mm in diameter. Gel-entrapped bacteria were less susceptible to all four antimicrobial agents than were planktonic micro-organisms. The degree of kill measured in artificial biofilm gel beads depended on the size of the gel bead and the cell density at which it was loaded. Disinfection efficacy decreased as gel bead radius or cell density increased. The manifest dependence of biofilm disinfection efficacy on the physical properties of the artificial biofilm (radius and cell density) suggests the impingement of transport limitation of biocide transport into the biofilm. A previously developed theory of biocide reaction and diffusion in biofilm was tested by calculating an appropriate Thiele modulus. In accordance with the theory, the efficacy of all four biocides decreased, albeit noisily, as the Thiele modulus exceeded 1. This result demonstrates that transport limitation can impact antimicrobial performance against biofilms not only of oxidizing biocides but also of non-oxidizing agents.     

太原北齐徐显秀墓壁画可培养真菌多样性及危害防治

【背景】原址保护的墓葬壁画普遍存在着有害微生物的威胁,对壁画菌害的长效防治是文物保护领域久未解决的难题。【目的】确定太原北齐徐显秀墓墓道霉变壁画上可培养真菌多样性,分离优势菌株,并筛选长效的生物杀灭剂,为墓葬壁画菌害的抢救性防治提供科学依据。【方法】利用无菌棉签采集壁画表面白色菌丝体样品,使用扫描电子显微镜分析病害菌微观形貌特征;通过培养、分离及纯化获得真菌菌株,运用形态学和分子技术鉴定种属;结合实验室抑菌圈测试和原位杀菌试验,分析不同生物杀灭剂的抑菌圈大小、杀菌后原位可培养微生物浓度以及ATP荧光值差异,以期找到长效的生物杀灭剂。【结果】霉变壁画表面有大量菌丝体并伴有分生孢子,白色菌丝体样品中可培养真菌属于子囊菌门(Ascomycota)的6个属,其中白色侧齿霉菌(Parengyodontium album)相对丰度最高(98.13%),为优势病害菌。经实验室和原位试验筛选评估,确定了双氯酚复配型杀灭剂(0.5%双氯酚+75%乙醇)对该病害真菌杀灭效果最好,在7年连续监测期内未出现病害菌的复发。【结论】白色侧齿霉菌是引起徐显秀墓墓道壁画霉变的主要可培养病害菌;双氯酚复配型杀菌剂用于该病害菌防治的时效性最长;建议后期结合抢救性防治、环境调节和跟踪监测,以达到墓葬壁画微生物危害的长效防控。     

A fast, precise and low-cost replication technique for nano- and high-aspect-ratio structures of biological and artificial surfaces

Biological surfaces are multifunctional interfaces between the organisms and their environment. Properties such as the wettability and adhesion of particles are linked to the micro- and nanostructures of their surfaces. In this study, we used plant and artificial surfaces covered with wax crystals to develop a low-cost replication technique with high resolution. The technique is applicable for fragile surface structures, as demonstrated for three-dimensional wax crystals, and is fast to prevent shrinking of the biological material by water loss during the molding process. Thermal evaporation of octacosan-1-ol has been used to create microstructured surfaces with small platelets as templates for molding. Epoxy resin as filling material provided the smallest deviations from the original surface structures and can be used for replication of nanostructures as small as 4.5 nm. Contact angle measurements of leaves and their replicas show that this technique can be used to develop biomimetic surfaces with similar wettability as in the plant surfaces.     

Exposure of Escherichia coli ATCC 12806 to Sublethal Concentrations of Food-Grade Biocides Influences Its Ability To Form Biofilm,Resistance to Antimicrobials,and Ultrastructure

Escherichia coli ATCC 12806 was exposed to increasing subinhibitory concentrations of three biocides widely used in food industry facilities: trisodium phosphate (TSP), sodium nitrite (SNI), and sodium hypochlorite (SHY). The cultures exhibited an acquired tolerance to biocides (especially to SNI and SHY) after exposure to such compounds. E. coli produced biofilms (as observed by confocal laser scanning microscopy) on polystyrene microtiter plates. Previous adaptation to SNI or SHY enhanced the formation of biofilms (with an increase in biovolume and surface coverage) both in the absence and in the presence (MIC/2) of such compounds. TSP reduced the ability of E. coli to produce biofilms. The concentration of suspended cells in the culture broth in contact with the polystyrene surfaces did not influence the biofilm structure. The increase in cell surface hydrophobicity (assessed by a test of microbial adhesion to solvents) after contact with SNI or SHY appeared to be associated with a strong capacity to form biofilms. Cultures exposed to biocides displayed a stable reduced susceptibility to a range of antibiotics (mainly aminoglycosides, cephalosporins, and quinolones) compared with cultures that were not exposed. SNI caused the greatest increase in resistances (14 antibiotics [48.3% of the total tested]) compared with TSP (1 antibiotic [3.4%]) and SHY (3 antibiotics [10.3%]). Adaptation to SHY involved changes in cell morphology (as observed by scanning electron microscopy) and ultrastructure (as observed by transmission electron microscopy) which allowed this bacterium to persist in the presence of severe SHY challenges. The findings of the present study suggest that the use of biocides at subinhibitory concentrations could represent a public health risk.     

Skin-Derived C-Terminal Filaggrin-2 Fragments Are Pseudomonas aeruginosa-Directed Antimicrobials Targeting Bacterial Replication

Soil- and waterborne bacteria such as Pseudomonas aeruginosa are constantly challenging body surfaces. Since infections of healthy skin are unexpectedly rare, we hypothesized that the outermost epidermis, the stratum corneum, and sweat glands directly control the growth of P. aeruginosa by surface-provided antimicrobials. Due to its high abundance in the upper epidermis and eccrine sweat glands, filaggrin-2 (FLG2), a water-insoluble 248 kDa S100 fused-type protein, might possess these innate effector functions. Indeed, recombinant FLG2 C-terminal protein fragments display potent antimicrobial activity against P. aeruginosa and other Pseudomonads. Moreover, upon cultivation on stratum corneum, P. aeruginosa release FLG2 C-terminus-containing FLG2 fragments from insoluble material, indicating liberation of antimicrobially active FLG2 fragments by the bacteria themselves. Analyses of the underlying antimicrobial mechanism reveal that FLG2 C-terminal fragments do not induce pore formation, as known for many other antimicrobial peptides, but membrane blebbing, suggesting an alternative mode of action. The association of the FLG2 fragment with the inner membrane of treated bacteria and its DNA-binding implicated an interference with the bacterial replication that was confirmed by in vitro and in vivo replication assays. Probably through in situ-activation by soil- and waterborne bacteria such as Pseudomonads, FLG2 interferes with the bacterial replication, terminates their growth on skin surface and thus may contributes to the skin’s antimicrobial defense shield. The apparent absence of FLG2 at certain body surfaces, as in the lung or of burned skin, would explain their higher susceptibility towards Pseudomonas infections and make FLG2 C-terminal fragments and their derivatives candidates for new Pseudomonas-targeting antimicrobials.     

Nisin-activated hydrophobic and hydrophilic surfaces: assessment of peptide adsorption and antibacterial activity against some food pathogens

An effective antimicrobial packaging or food contact surface should be able to kill or inhibit micro-organisms that cause food-borne illnesses. Setting up such systems, by nisin adsorption on hydrophilic and hydrophobic surfaces, is still a matter of debate. For this purpose, nisin was adsorbed on two types of low-density polyethylene: the hydrophobic native film and the hydrophilic acrylic acid-treated surface. The antibacterial activity was compared for those two films and it was highly dependent on the nature of the surface and the nisin-adsorbed amount. The hydrophilic surfaces presented higher antibacterial activity and higher amount of nisin than the hydrophobic surfaces. The effectiveness of the activated surfaces was assessed against Listeria innocua and the food pathogens Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. S. aureus was more sensitive than the three other test bacteria toward both nisin-functionalized films. Simulation tests to mimic refrigerated temperature showed that the films were effective at 20 and 4 °C with no significant difference between the two temperatures after 30 min of exposure to culture media.     

Identification of ypqP as a New Bacillus subtilis Biofilm Determinant That Mediates the Protection of Staphylococcus aureus against Antimicrobial Agents in Mixed-Species Communities

In most habitats, microbial life is organized in biofilms, three-dimensional edifices sustained by extracellular polymeric substances that enable bacteria to resist harsh and changing environments. Under multispecies conditions, bacteria can benefit from the polymers produced by other species (“public goods”), thus improving their survival under toxic conditions. A recent study showed that a Bacillus subtilis hospital isolate (NDmed) was able to protect Staphylococcus aureus from biocide action in multispecies biofilms. In this work, we identified ypqP, a gene whose product is required in NDmed for thick-biofilm formation on submerged surfaces and for resistance to two biocides widely used in hospitals. NDmed and S. aureus formed mixed biofilms, and both their spatial arrangement and pathogen protection were mediated by YpqP. Functional ypqP is present in other natural B. subtilis biofilm-forming isolates. However, the gene is disrupted by the SPβ prophage in the weak submerged-biofilm-forming strains NCIB3610 and 168, which are both less resistant than NDmed to the biocides tested. Furthermore, in a 168 laboratory strain cured of the SPβ prophage, the reestablishment of a functional ypqP gene led to increased thickness and resistance to biocides of the associated biofilms. We therefore propose that YpqP is a new and important determinant of B. subtilis surface biofilm architecture, protection against exposure to toxic compounds, and social behavior in bacterial communities.