Chloroplast DNA insertions into the nuclear genome of rice: the genes,sites and ages of insertion involved

Rice (Oryza sativa) is one of three predominant grain crops, and its nuclear and organelle genomes have been sequenced. Following genome analysis revealed many exchanges of DNA sequences between the nuclear and organelle genomes. In this study, a total of 45 chloroplast DNA insertions more than 2 kb in length were detected in rice nuclear genome. A homologous recombination mechanism is expected for those chloroplast insertions with high similarity between their flanking sequences. Only five chloroplast insertions with high sequence similarity between two flanking sequences from an insertion were found in the 45 insertions, suggesting that rice might follow the non-homologous end-joining (NHEJ) repair of double-stranded breaks mechanism, which is suggested to be common to all eukaryotes. Our studies indicate that the most chloroplast insertions occurred at a nuclear region characterized by a sharp change of repetitive sequence density. One potential explanation is that regions such as this might be susceptible target sites or “hotspots” of DNA damage. Our results also suggest that the insertion of retrotransposon elements or non-chloroplast DNA into chloroplast DNA insertions may contribute significantly to their fragmentation process. Moreover, based on chloroplast insertions in nuclear genomes of two subspecies (indica and japonica) of cultivated rice, our results strongly suggest that they diverged during 0.06–0.22 million years ago. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Differential impact of retrotransposon populations on the genome of allotetraploid tobacco (<Emphasis Type="Italic">Nicotiana tabacum</Emphasis>)

LTR-retrotransposons contribute substantially to the structural diversity of plant genomes. Recent models of genome evolution suggest that retrotransposon amplification is offset by removal of retrotransposon sequences, leading to a turnover of retrotransposon populations. While bursts of amplification have been documented, it is not known whether removal of retrotransposon sequences occurs continuously, or is triggered by specific stimuli over short evolutionary periods. In this work, we have characterized the evolutionary dynamics of four populations of copia-type retrotransposons in allotetraploid tobacco (Nicotiana tabacum) and its two diploid progenitors Nicotiana sylvestris and Nicotiana tomentosiformis. We have used SSAP (Sequence-Specific Amplification Polymorphism) to evaluate the contribution retrotransposons have made to the diversity of tobacco and its diploid progenitor species, to quantify the contribution each diploid progenitor has made to tobacco's retrotransposon populations, and to estimate losses or amplifications of retrotransposon sequences subsequent to tobacco's formation. Our results show that the tobacco genome derives from a turnover of retrotransposon sequences with removals concomitant with new insertions. We have detected unique behaviour specific to each retrotransposon population, with differences likely reflecting distinct evolutionary histories and activities of particular elements. Our results indicate that the retrotransposon content of a given plant species is strongly influenced by the host evolutionary history, with periods of rapid turnover of retrotransposon sequences stimulated by allopolyploidy.     

Retrotransposon populations of <Emphasis Type="Italic">Vicia</Emphasis> species with varying genome size

The (non-LTR) LINE and Ty3-gypsy-type LTR retrotransposon populations of three Vicia species that differ in genome size (Vicia faba, Vicia melanops and Vicia sativa) have been characterised. In each species the LINE retrotransposons comprise a complex, very heterogeneous set of sequences, while the Ty3-gypsy elements are much more homogeneous. Copy numbers of all three retrotransposon groups (Ty1-copia, Ty3-gypsy and LINE) in these species have been estimated by random genomic sequencing and Southern hybridisation analysis. The Ty3-gypsy elements are extremely numerous in all species, accounting for 18–35% of their genomes. The Ty1-copia group elements are somewhat less abundant and LINE elements are present in still lower amounts. Collectively, 20–45% of the genomes of these three Vicia species are comprised of retrotransposons. These data show that the three retrotransposon groups have proliferated to different extents in members of the Vicia genus and high proliferation has been associated with homogenisation of the retrotransposon population.Electronic Supplementary Material Supplementary material is available for this article at .     

Structural heterogeneity in the R173 family of rye-specific repetitive DNA sequences

The rye-specific R173 family of repeated DNA sequences consists of ca. 15 000 individual copies per diploid rye (Secale cereale) genome and is distributed over all 7 rye chromosomes in a dispersed manner. Individual R173 elements vary in size between 3 and 6 kb, are generally not arranged as tandem repeats and are flanked by both multi-copy and single-copy sequences. DNA sequence analysis of three R173 elements (R173-1, R173-2 and R173-3) demonstrated a high degree of homology in conserved domains. The structure of R173-1 was quite different from the other two elements: long direct repeats, which represent a rye-specific repetitive sequence, were found at the ends and a 600 bp long domain was replaced by an unrelated sequence of approximately equal size. R173-2 and R173-3 were extremely similar to each other with the exception of a terminal truncation of R173-2. No open reading frames for proteins >20 kDa were present and a database search failed to detect significant homologies to published protein sequences. Despite the transposon like genomic organisation of the R173 family, individual elements lacked sequence features frequently associated with transposons and retrotransposons. In contrast, two of the regions flanking R173 elements showed strong DNA homologies to a 850 bp long region of a proposed wheat retrotransposon and to a 300 bp long region downstream of the wheatGlu-D1 gene.     

Identification of novel LTR retrotransposons in the genome of Aedes aegypti

We have detected seventy-six novel LTR retrotransposons in the genome of the mosquito Aedes aegypti by a genome wide analysis using the LTR_STRUC program. We have performed a phylogenetic classification of these novel elements and a distribution analysis in the genome of A. aegypti. These mobile elements belong either to the Ty3/gypsy or to the Bel family of retrotransposons and were not annotated in the mosquito LTR retrotransposon database (TEfam). We have found that  1.8% of the genome is occupied by these newly detected retrotransposons that are distributed predominantly in intergenic genomic sequences and introns. The potential role of retrotransposon insertions linked to host genes is described and discussed. We show that a retrotransposon family belonging to the Osvaldo lineage has peculiar structural features, and its presence is likely to be restricted to the A. aegypti and to the Culex pipiens quinquefasciatus genomes. Furthermore we show that the ninja-like group of elements lacks the Primer Binding Site (PBS) sequence necessary for the replication of retrotransposons. These results integrate the knowledge on the complicate genomic structure of an important disease vector.     

The repetitive component of the A genome of peanut (Arachis hypogaea) and its role in remodelling intergenic sequence space since its evolutionary divergence from the B genome

Background and Aims

Peanut (Arachis hypogaea) is an allotetraploid (AABB-type genome) of recent origin, with a genome of about 2·8 Gb and a high repetitive content. This study reports an analysis of the repetitive component of the peanut A genome using bacterial artificial chromosome (BAC) clones from A. duranensis, the most probable A genome donor, and the probable consequences of the activity of these elements since the divergence of the peanut A and B genomes.

Methods

The repetitive content of the A genome was analysed by using A. duranensis BAC clones as probes for fluorescence in situ hybridization (BAC-FISH), and by sequencing and characterization of 12 genomic regions. For the analysis of the evolutionary dynamics, two A genome regions are compared with their B genome homeologues.

Key Results

BAC-FISH using 27 A. duranensis BAC clones as probes gave dispersed and repetitive DNA characteristic signals, predominantly in interstitial regions of the peanut A chromosomes. The sequences of 14 BAC clones showed complete and truncated copies of ten abundant long terminal repeat (LTR) retrotransposons, characterized here. Almost all dateable transposition events occurred <3·5 million years ago, the estimated date of the divergence of A and B genomes. The most abundant retrotransposon is Feral, apparently parasitic on the retrotransposon FIDEL, followed by Pipa, also non-autonomous and probably parasitic on a retrotransposon we named Pipoka. The comparison of the A and B genome homeologous regions showed conserved segments of high sequence identity, punctuated by predominantly indel regions without significant similarity.

Conclusions

A substantial proportion of the highly repetitive component of the peanut A genome appears to be accounted for by relatively few LTR retrotransposons and their truncated copies or solo LTRs. The most abundant of the retrotransposons are non-autonomous. The activity of these retrotransposons has been a very significant driver of genome evolution since the evolutionary divergence of the A and B genomes.     

Structure Analysis of Two <Emphasis Type="Italic">Toxoplasma gondii</Emphasis> and <Emphasis Type="BoldItalic">Neospora caninum</Emphasis> Satellite DNA Families and Evolution of Their Common Monomeric Sequence

A family of repetitive DNA elements of approximately 350 bp—Sat350—that are members of Toxoplasma gondii satellite DNA was further analyzed. Sequence analysis identified at least three distinct repeat types within this family, called types A, B, and C. B repeats were divided into the subtypes B1 and B2. A search for internal repetitions within this family permitted the identification of conserved regions and the design of PCR primers that amplify almost all these repetitive elements. These primers amplified the expected 350-bp repeats and a novel 680-bp repetitive element (Sat680) related to this family. Two additional tandemly repeated high-order structures corresponding to this satellite DNA family were found by searching the Toxoplasma genome database with these sequences. These studies were confirmed by sequence analysis and identified: (1) an arrangement of AB1CB2 350-bp repeats and (2) an arrangement of two 350-bp-like repeats, resulting in a 680-bp monomer. Sequence comparison and phylogenetic analysis indicated that both high-order structures may have originated from the same ancestral 350-bp repeat. PCR amplification, sequence analysis and Southern blot showed that similar high-order structures were also found in the Toxoplasma-sister taxon Neospora caninum. The Toxoplasma genome database ( ) permitted the assembly of a contig harboring Sat350 elements at one end and a long nonrepetitive DNA sequence flanking this satellite DNA. The region bordering the Sat350 repeats contained two differentially expressed sequence-related regions and interstitial telomeric sequences.     

Analysis of a contiguous 211 kb sequence in diploid wheat (Triticum monococcum L.) reveals multiple mechanisms of genome evolution

In plant species with large genomes such as wheat or barley, genome organization at the level of DNA sequence is largely unknown. The largest sequences that are publicly accessible so far from Triticeae genomes are two 60 kb and 66 kb intervals from barley. Here, we report on the analysis of a 211 kb contiguous DNA sequence from diploid wheat (Triticum monococcum L.). Five putative genes were identified, two of which show similarity to disease resistance genes. Three of the five genes are clustered in a 31 kb gene-enriched island while the two others are separated from the cluster and from each other by large stretches of repetitive DNA. About 70% of the contig is comprised of several classes of transposable elements. Ten different types of retrotransposons were identified, most of them forming a pattern of nested insertions similar to those found in maize and barley. Evidence was found for major deletion, insertion and duplication events within the analysed region, suggesting multiple mechanisms of genome evolution in addition to retrotransposon amplification. Seven types of foldback transposons, an element class previously not described for wheat genomes, were characterized. One such element was found to be closely associated with genes in several Triticeae species and may therefore be of use for the identification of gene-rich regions in these species.     

Dynamics and differential proliferation of transposable elements during the evolution of the B and A genomes of wheat

Transposable elements (TEs) constitute >80% of the wheat genome but their dynamics and contribution to size variation and evolution of wheat genomes (Triticum and Aegilops species) remain unexplored. In this study, 10 genomic regions have been sequenced from wheat chromosome 3B and used to constitute, along with all publicly available genomic sequences of wheat, 1.98 Mb of sequence (from 13 BAC clones) of the wheat B genome and 3.63 Mb of sequence (from 19 BAC clones) of the wheat A genome. Analysis of TE sequence proportions (as percentages), ratios of complete to truncated copies, and estimation of insertion dates of class I retrotransposons showed that specific types of TEs have undergone waves of differential proliferation in the B and A genomes of wheat. While both genomes show similar rates and relatively ancient proliferation periods for the Athila retrotransposons, the Copia retrotransposons proliferated more recently in the A genome whereas Gypsy retrotransposon proliferation is more recent in the B genome. It was possible to estimate for the first time the proliferation periods of the abundant CACTA class II DNA transposons, relative to that of the three main retrotransposon superfamilies. Proliferation of these TEs started prior to and overlapped with that of the Athila retrotransposons in both genomes. However, they also proliferated during the same periods as Gypsy and Copia retrotransposons in the A genome, but not in the B genome. As estimated from their insertion dates and confirmed by PCR-based tracing analysis, the majority of differential proliferation of TEs in B and A genomes of wheat (87 and 83%, respectively), leading to rapid sequence divergence, occurred prior to the allotetraploidization event that brought them together in Triticum turgidum and Triticum aestivum, <0.5 million years ago. More importantly, the allotetraploidization event appears to have neither enhanced nor repressed retrotranspositions. We discuss the apparent proliferation of TEs as resulting from their insertion, removal, and/or combinations of both evolutionary forces.     

A novel repetitive DNA sequence in the genus Oryza

Summary Repetitive DNA sequences in the genus Oryza (rice) represent a large fraction of the nuclear DNA. The isolation and characterization of major repetitive DNA sequences will lead to a better understanding of rice genome organization and evolution. Here we report the characterization of a novel repetitive sequence, CC-1, from the CC genome. This repetitive sequence is present as long tandem arrays with a repeat unit 194 bp in length in the CC-diploid genome but 172 bp in length in the BBCC and CCDD tetraploid genomes. This repetitive sequence is also present, though at lower copy numbers, in the AA and BB genomes, but is absent in the EE and FF genomes. Hybridization experiments revealed considerable differences both in copy numbers and in restriction fragment patterns of CC-1 both between and within rice species. The results support the hypothesis that the CC genome is more closely related to the AA genome than to the BB genome, and most distantly related to the EE and FF genomes.     

Genome modifications in protoplast-derived tobacco plants: Contents of repetitive DNA sequences

Plasticity of the tobacco genome was studied by testing the DNAs of protoplast-derived regenerants with three different repetitive DNA sequences by the method of quantitative DNA/DNA hybridizations. A large population of 91 regenerants belonging to 35 different protoclones was analysed and a high degree of heterogeneity in the contents of the different DNA repeats was detected. The contents of middle repetitive sequences of two types were more stable or changed in the same direction, while the highly repetitive sequence varied independently and displayed a significant reduction in comparison with the two other sequences. Comparing the variation within the subpopulations of plants of the same clonal origin and the variation among the protoclones led to a conclusion that the pre-existing DNA variability in the starting plant material and/or thein vitro stress during the very early stages of protoclone regeneration played a decisive role in the formation of modified genomes in regenerants.     

Ty1-copia group retrotransposon sequences in amphibia and reptilia

We have isolated sequences belonging to Tyl-copia group retrotransposons from the genomes of an amphibian (Pyxicephalus adspersa) and three reptiles (Conolophus subscristatus, Amblyrynchus cristatus and Pytas mucosus). Two different seqences were found in the amphibian (Tpa1 and Tpa2). Each is present in several copies per genome and absent from the genomes of two other amphibian species. The C. subcristatus sequence Tcs1 is present in multiple copies in both its host genome (Galapagos land iguana) and the genome of the related Galapagos marine iguana (A. cristatus). There is little or no polymorphism in Tcs1 insertions between different individual animals, suggesting that this sequence is not transposing rapidly in either iguana genome. The P. mucosus sequence Tpm1 shows a discontinuous distribution in snake species, suggesting that it has either been lost from many lineages during vertical germline transmission or has been transferred horizontally in some snake species. Phylogenetic comparisons of all these sequences with each other and with other members of this retrotransposon group from other animals and plants show that sequences within a particular vertebrate species are most closely related to each other, consistent with a vertical transmission model for their evolution.     

A shotgun approach to discovering and reconstructing consensus retrotransposons ex novo from dense contigs of short sequences derived from Genbank Genome Survey Sequence database records

Retrotransposons constitute the majority of pseudogenic protein coding regions of most eukaryotic genomes. Most genomes carry tens to thousands of retrotransposon copies derived from dozens of distinct families, but most if not all of these copies are non-functional and contain disabling mutations, including large numbers of indels. Until recently, most regions rich in these elements were virtually ignored in all but the most complete genome sequencing projects, and the full extent of their impact on the structure and function of the genomes of higher eukaryotes was under-appreciated. Even when new retrotransposons are encountered and annotated by automated gene finding programs and similarity searches, coding regions are treated as exons and invariably and not surprisingly mistranslated because of numerous frameshift mutations and large indels. Very few functional retrotransposons contain introns, as in silico annotations imply. While many repetitive DNA consensus sequences have been assembled from collections of largely full-length copies using full-length templates, we have shown that repetitive DNA consensus sequence contigs representing long, moderately high copy-number elements can also be generated ex novo in the absence of templates from very short overlapping sequences. We have devised an in silico strategy to recover and reconstruct consensus sequences of elements up to 20,000 bp by building dense contigs of hundreds of overlapping 400 to 900-bp records found in the Genbank Genome Survey Sequence database. The results are hypothetical ancestral sequences that encode elements that appear to be fully functional with intact open reading frames and other conserved features.     

Structure and evolution of a family of interspersed repetitive DNA sequences inCaenorhabditis elegans

Summary The structure of three members of a repetitive DNA family from the genome of the nematodeCaenorhabditis elegans has been studied. The three repetitive elements have a similar unitary structure consisting of two 451-bp sequences in inverted orientation separated by 491 bp, 1.5 kb, and 2.5 kb, respectively. The 491-bp sequence separating the inverted 451-bp sequences of the shortest element is found adjacent to one of the repeats in the other two elements as well. The combination of the three sequences we define as the basic repetitive unit. Comparison of the nucleotide sequences of the three elements has allowed the identification of the one most closely resembling the primordial repetitive element. Additionally, a process of co-evolution is evident that results in the introduction of identical sequence changes into both copies of the inverted sequence within a single unit. Possible mechanisms are discussed for the homogenization of these sequences. A direct test of one possible homogenization mechanism, namely homologous recombination between the inverted sequences accompanied by gene conversion, shows that recombination between the inverted repeats does not occur at high frequency.     

Non-LTR retrotransposons in fungi

Non-long terminal repeat (non-LTR) retrotransposons have contributed to shaping the structure and function of genomes. Fungi have small genomes, usually with limited amounts of repetitive DNA. In silico approach has been used to survey the non-LTR elements in 57 fungal genomes. More than 100 novel non-LTR retrotransposons were found, which belonged to five diverse clades. The present survey identified two novel clades of fungal non-LTR retrotransposons. The copy number of non-LTR retroelements varied widely. Some of the studied species contained a single copy of non-LTR retrotransposon, whereas others possessed a great number of non-LTR retrotransposon copies per genome. Although evolutionary relationships of most elements are congruent with phylogeny of host species, a new case of possible horizontal transfer was found between Eurotiomycetes and Sordariomycetes. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.