Enhanced electrode-reducing rate during the enrichment process in an air-cathode microbial fuel cell

The improvement in electricity generation during the enrichment process of a microbial consortium was analyzed using an air-cathode microbial fuel cell (MFC) repeatedly fed with acetate that was originally inoculated with sludge from an anaerobic digester. The anodic maximum current density produced by the anode biofilm increased from 0.12 mA/cm² at day 28 to 1.12 mA/cm² at day 105. However, the microbial cell density on the carbon cloth anode increased only three times throughout this same time period from 0.21 to 0.69 mg protein/cm², indicating that the biocatalytic activity of the consortium was also enhanced. The microbial activity was calculated to have a per biomass anode-reducing rate of 374 μmol electron g protein⁻¹ min⁻¹ at day 28 and 1,002 μmol electron g protein⁻¹ min⁻¹ at day 105. A bacterial community analysis of the anode biofilm revealed that the dominant phylotype, which was closely related to the known exoelectrogenic bacterium, Geobacter sulfurreducens, showed an increase in abundance from 32% to 70% of the total microbial cells. Fluorescent in situ hybridization observation also showed the increase of Geobacter-like phylotypes from 53% to 72%. These results suggest that the improvement of microbial current generation in microbial fuel cells is a function of both microbial cell growth on the electrode and changes in the bacterial community highly dominated by a known exoelectrogenic bacterium during the enrichment process.     

Nitrogen, Carbon, and Sulfur Metabolism in Natural Thioploca Samples

Filamentous sulfur bacteria of the genus Thioploca occur as dense mats on the continental shelf off the coast of Chile and Peru. Since little is known about their nitrogen, sulfur, and carbon metabolism, this study was undertaken to investigate their (eco)physiology. Thioploca is able to store internally high concentrations of sulfur globules and nitrate. It has been previously hypothesized that these large vacuolated bacteria can oxidize sulfide by reducing their internally stored nitrate. We examined this nitrate reduction by incubation experiments of washed Thioploca sheaths with trichomes in combination with ¹⁵N compounds and mass spectrometry and found that these Thioploca samples produce ammonium at a rate of 1 nmol min⁻¹ mg of protein⁻¹. Controls showed no significant activity. Sulfate was shown to be the end product of sulfide oxidation and was observed at a rate of 2 to 3 nmol min⁻¹ mg of protein⁻¹. The ammonium and sulfate production rates were not influenced by the addition of sulfide, suggesting that sulfide is first oxidized to elemental sulfur, and in a second independent step elemental sulfur is oxidized to sulfate. The average sulfide oxidation rate measured was 5 nmol min⁻¹ mg of protein⁻¹ and could be increased to 10.7 nmol min⁻¹ mg of protein⁻¹ after the trichomes were starved for 45 h. Incorporation of ¹⁴CO₂ was at a rate of 0.4 to 0.8 nmol min⁻¹ mg of protein⁻¹, which is half the rate calculated from sulfide oxidation. [2-¹⁴C]acetate incorporation was 0.4 nmol min⁻¹ mg of protein⁻¹, which is equal to the CO₂ fixation rate, and no ¹⁴CO₂ production was detected. These results suggest that Thioploca species are facultative chemolithoautotrophs capable of mixotrophic growth. Microautoradiography confirmed that Thioploca cells assimilated the majority of the radiocarbon from [2-¹⁴C]acetate, with only a minor contribution by epibiontic bacteria present in the samples.     

Biofuel Cells Select for Microbial Consortia That Self-Mediate Electron Transfer

Microbial fuel cells hold great promise as a sustainable biotechnological solution to future energy needs. Current efforts to improve the efficiency of such fuel cells are limited by the lack of knowledge about the microbial ecology of these systems. The purposes of this study were (i) to elucidate whether a bacterial community, either suspended or attached to an electrode, can evolve in a microbial fuel cell to bring about higher power output, and (ii) to identify species responsible for the electricity generation. Enrichment by repeated transfer of a bacterial consortium harvested from the anode compartment of a biofuel cell in which glucose was used increased the output from an initial level of 0.6 W m⁻² of electrode surface to a maximal level of 4.31 W m⁻² (664 mV, 30.9 mA) when plain graphite electrodes were used. This result was obtained with an average loading rate of 1 g of glucose liter⁻¹ day⁻¹ and corresponded to 81% efficiency for electron transfer from glucose to electricity. Cyclic voltammetry indicated that the enhanced microbial consortium had either membrane-bound or excreted redox components that were not initially detected in the community. Dominant species of the enhanced culture were identified by denaturing gradient gel electrophoresis and culturing. The community consisted mainly of facultative anaerobic bacteria, such as Alcaligenes faecalis and Enterococcus gallinarum, which are capable of hydrogen production. Pseudomonas aeruginosa and other Pseudomonas species were also isolated. For several isolates, electrochemical activity was mainly due to excreted redox mediators, and one of these mediators, pyocyanin produced by P. aeruginosa, could be characterized. Overall, the enrichment procedure, irrespective of whether only attached or suspended bacteria were examined, selected for organisms capable of mediating the electron transfer either by direct bacterial transfer or by excretion of redox components.     

Anodes Stimulate Anaerobic Toluene Degradation via Sulfur Cycling in Marine Sediments

Hydrocarbons released during oil spills are persistent in marine sediments due to the absence of suitable electron acceptors below the oxic zone. Here, we investigated an alternative bioremediation strategy to remove toluene, a model monoaromatic hydrocarbon, using a bioanode. Bioelectrochemical reactors were inoculated with sediment collected from a hydrocarbon-contaminated marine site, and anodes were polarized at 0 mV and +300 mV (versus an Ag/AgCl [3 M KCl] reference electrode). The degradation of toluene was directly linked to current generation of up to 301 mA m⁻² and 431 mA m⁻² for the bioanodes polarized at 0 mV and +300 mV, respectively. Peak currents decreased over time even after periodic spiking with toluene. The monitoring of sulfate concentrations during bioelectrochemical experiments suggested that sulfur metabolism was involved in toluene degradation at bioanodes. 16S rRNA gene-based Illumina sequencing of the bulk anolyte and anode samples revealed enrichment with electrocatalytically active microorganisms, toluene degraders, and sulfate-reducing microorganisms. Quantitative PCR targeting the α-subunit of the dissimilatory sulfite reductase (encoded by dsrA) and the α-subunit of the benzylsuccinate synthase (encoded by bssA) confirmed these findings. In particular, members of the family Desulfobulbaceae were enriched concomitantly with current production and toluene degradation. Based on these observations, we propose two mechanisms for bioelectrochemical toluene degradation: (i) direct electron transfer to the anode and/or (ii) sulfide-mediated electron transfer.     

Nitrate-Dependent Ferrous Iron Oxidation by Anaerobic Ammonium Oxidation (Anammox) Bacteria

We examined nitrate-dependent Fe²⁺ oxidation mediated by anaerobic ammonium oxidation (anammox) bacteria. Enrichment cultures of “Candidatus Brocadia sinica” anaerobically oxidized Fe²⁺ and reduced NO₃⁻ to nitrogen gas at rates of 3.7 ± 0.2 and 1.3 ± 0.1 (mean ± standard deviation [SD]) nmol mg protein⁻¹ min⁻¹, respectively (37°C and pH 7.3). This nitrate reduction rate is an order of magnitude lower than the anammox activity of “Ca. Brocadia sinica” (10 to 75 nmol NH₄⁺ mg protein⁻¹ min⁻¹). A ¹⁵N tracer experiment demonstrated that coupling of nitrate-dependent Fe²⁺ oxidation and the anammox reaction was responsible for producing nitrogen gas from NO₃⁻ by “Ca. Brocadia sinica.” The activities of nitrate-dependent Fe²⁺ oxidation were dependent on temperature and pH, and the highest activities were seen at temperatures of 30 to 45°C and pHs ranging from 5.9 to 9.8. The mean half-saturation constant for NO₃⁻ ± SD of “Ca. Brocadia sinica” was determined to be 51 ± 21 μM. Nitrate-dependent Fe²⁺ oxidation was further demonstrated by another anammox bacterium, “Candidatus Scalindua sp.,” whose rates of Fe²⁺ oxidation and NO₃⁻ reduction were 4.7 ± 0.59 and 1.45 ± 0.05 nmol mg protein⁻¹ min⁻¹, respectively (20°C and pH 7.3). Co-occurrence of nitrate-dependent Fe²⁺ oxidation and the anammox reaction decreased the molar ratios of consumed NO₂⁻ to consumed NH₄⁺ (ΔNO₂⁻/ΔNH₄⁺) and produced NO₃⁻ to consumed NH₄⁺ (ΔNO₃⁻/ΔNH₄⁺). These reactions are preferable to the application of anammox processes for wastewater treatment.     

Dynamics of Microbial Communities on Marine Snow Aggregates: Colonization, Growth, Detachment, and Grazing Mortality of Attached Bacteria

We studied the dynamics of microbial communities attached to model aggregates (4-mm-diameter agar spheres) and the component processes of colonization, detachment, growth, and grazing mortality. Agar spheres incubated in raw seawater were rapidly colonized by bacteria, followed by flagellates and ciliates. Colonization can be described as a diffusion process, and encounter volume rates were estimated at about 0.01 and 0.1 cm³ h⁻¹ for bacteria and flagellates, respectively. After initial colonization, the abundances of flagellates and ciliates remained approximately constant at 10³ to 10⁴ and ~10² cells sphere⁻¹, respectively, whereas bacterial populations increased at a declining rate to >10⁷ cells sphere⁻¹. Attached microorganisms initially detached at high specific rates of ~10⁻² min⁻¹, but the bacteria gradually became irreversibly attached to the spheres. Bacterial growth (0 to 2 day⁻¹) was density dependent and declined hyperbolically when cell density exceeded a threshold. Bacterivorous flagellates grazed on the sphere surface at an average saturated rate of 15 bacteria flagellate⁻¹ h⁻¹. At low bacterial densities, the flagellate surface clearance rate was ~5 × 10⁻⁷ cm² min⁻¹, but it declined hyperbolically with increasing bacterial density. Using the experimentally estimated process rates and integrating the component processes in a simple model reproduces the main features of the observed microbial population dynamics. Differences between observed and predicted population dynamics suggest, however, that other factors, e.g., antagonistic interactions between bacteria, are of importance in shaping marine snow microbial communities.     

Chromate Reduction by a Pseudomonad Isolated from a Site Contaminated with Chromated Copper Arsenate

A pseudomonad (CRB5) isolated from a decommissioned wood preservation site reduced toxic chromate [Cr(VI)] to an insoluble Cr(III) precipitate under aerobic and anaerobic conditions. CRB5 tolerated up to 520 mg of Cr(VI) liter⁻¹ and reduced chromate in the presence of copper and arsenate. Under anaerobic conditions it also reduced Co(III) and U(VI), partially internalizing each metal. Metal precipitates were also found on the surface of the outer membrane and (sometimes) on a capsule. The results showed that chromate reduction by CRB5 was mediated by a soluble enzyme that was largely contained in the cytoplasm but also found outside of the cells. The crude reductase activity in the soluble fraction showed a K_m of 23 mg liter⁻¹ (437 μM) and a V_max of 0.98 mg of Cr h⁻¹ mg of protein⁻¹ (317 nmol min⁻¹ mg of protein⁻¹). Minor membrane-associated Cr(VI) reduction under anaerobiosis may account for anaerobic reduction of chromate under nongrowth conditions with an organic electron donor present. Chromate reduction under both aerobic and anaerobic conditions may be a detoxification strategy for the bacterium which could be exploited to bioremediate chromate-contaminated or other toxic heavy metal-contaminated environments.     

Enrichment of microbial community generating electricity using a fuel-cell-type electrochemical cell

A fuel cell was used to enrich a microbial consortium generating electricity, using organic wastewater as the fuel. Within 30 days of enrichment the maximum current of 0.2 mA was generated with a resistance of 1 k. Current generation was coupled to a fall in chemical oxygen demand from over 1,700 mg l^–1 down to 50 mg l^–1. Denaturing gradient gel electrophoresis showed a different microbial population in the enriched electrode from that in the sludge used as the inoculum. Electron microscopic observation showed a biofilm on the electrode surface and microbial clumps. Nanobacteria-like particles were present on the biofilm surface. Metabolic inhibitors and electron acceptors inhibited the current generation. 16S ribosomal RNA gene analysis showed a diverse bacterial population in the enrichment culture. These findings demonstrate that an electricity-generating microbial consortium can be enriched using a fuel cell and that the electrochemical activity is a form of anaerobic electron transfer.     

Microorganism-immobilized carbon nanoparticle anode for microbial fuel cells based on direct electron transfer

A fast and convenient bacterial immobilization method was proposed as an attempt to improve the anode efficiency of a microbial fuel cell, in which bacteria were entrapped into carbon nanoparticle matrix. The direct electron transfer from the entrapped bacterial cells to the anode was verified using cyclic voltammogram (CV). Using the immobilized bioanode, the start-up time of the MFC was greatly reduced. Meanwhile, the maximum power density of 1,947 mW m⁻² with the modified anode was much higher than that with the biofilm-based carbon cloth anode (1,479 mW m⁻²). Impedance measurements suggested that performance improvement resulted from the decrease in charge transfer and diffusion resistances. The results demonstrated that bacteria immobilization using carbon nanoparticle matrix was a simple and efficient approach for improving the anodes performances in MFCs.     

3-Hydroxypropionyl-coenzyme A synthetase from Metallosphaera sedula, an enzyme involved in autotrophic CO2 fixation

A modified 3-hydroxypropionate cycle has been proposed as the autotrophic CO₂ fixation pathway for the thermoacidophilic crenarchaeon Metallosphaera sedula. The cycle requires the reductive conversion of 3-hydroxypropionate to propionyl-coenzyme A (propionyl-CoA). The specific activity of the 3-hydroxypropionate-, CoA-, and MgATP-dependent oxidation of NADPH in autotrophically grown cells was 0.023 μmol min⁻¹mg protein⁻¹. The reaction sequence is catalyzed by at least two enzymes. The first enzyme, 3-hydroxypropionyl-CoA synthetase, catalyzes the following reaction: 3-hydroxypropionate + ATP + CoA → 3-hydroxypropionyl-CoA + AMP + PP_i. The enzyme was purified 95-fold to a specific activity of 18 μmol min⁻¹ mg protein⁻¹ from autotrophically grown M. sedula cells. An internal peptide sequence was determined and a gene encoding a homologous protein identified in the genome of Sulfolobus tokodaii; similar genes were found in S. solfataricus and S. acidocaldarius. The gene was heterologously expressed in Escherichia coli, and the His-tagged protein was purified. Both the native enzyme from M. sedula and the recombinant enzyme from S. tokodaii not only activated 3-hydroxypropionate to its CoA ester but also activated propionate, acrylate, acetate, and butyrate; however, with the exception of propionate, the affinities for these substrates were reduced. 3-Hydroxypropionyl-CoA synthetase is up-regulated eightfold in autotrophically versus heterotrophically grown M. sedula, supporting its proposed role during CO₂ fixation in this archaeon and possibly other members of the Sulfolobaceae family.     

Non-Growth-Associated Demethylation of Dimethylsulfoniopropionate by (Homo)acetogenic Bacteria

The demethylation of the algal osmolyte dimethylsulfoniopropionate (DMSP) to methylthiopropionate (MTPA) by (homo)acetogenic bacteria was studied. Five Eubacterium limosum strains (including the type strain), Sporomusa ovata DSM 2662^T, Sporomusa sphaeroides DSM 2875^T, and Acetobacterium woodii DSM 1030^T were shown to demethylate DMSP stoichiometrically to MTPA. The (homo)acetogenic fermentation based on this demethylation did not result in any significant increase in biomass. The analogous demethylation of glycine betaine to dimethylglycine does support growth of acetogens. In batch cultures of E. limosum PM31 DMSP and glycine betaine were demethylated simultaneously. In mixed substrates experiments with fructose-DMSP or methanol-DMSP, DMSP was used rapidly but only after exhaustion of the fructose or the methanol. In steady-state fructose-limited chemostat cultures (at a dilution rate of 0.03 h⁻¹) with DMSP as a second reservoir substrate, DMSP was biotransformed to MTPA but this did not result in higher biomass values than in cultures without DMSP; cells from such cultures demethylated DMSP at rates of approximately 50 nmol min⁻¹ mg of protein⁻¹, both after growth in the presence of DMSP and after growth in its absence. In cell extracts of glycine betaine-grown strain PM31, DMSP demethylation activities of 21 to 24 nmol min⁻¹ mg of protein⁻¹ were detected with tetrahydrofolate as a methyl acceptor; the activities seen with glycine betaine were approximately 10-fold lower. A speculative explanation for the demethylation of DMSP without an obvious benefit for the organism is that the DMSP-demethylating activity is catalyzed by the glycine betaine-demethylating enzyme and that a transport-related factor, in particular a higher energy demand for DMSP transport across the cytoplasmic membrane than for glycine betaine transport, may reduce the overall ATP yield of the fermentation to virtually zero.     

Inactivation of Toluene 2-Monooxygenase in Burkholderia cepacia G4 by Alkynes

High concentrations of acetylene (10 to 50% [vol/vol] gas phase) were required to inhibit the growth of Burkholderia cepacia G4 on toluene, while 1% (vol/vol) (gas phase) propyne or 1-butyne completely inhibited growth. Low concentrations of longer-chain alkynes (C₅ to C₁₀) were also effective inhibitors of toluene-dependent growth, and 2- and 3-alkynes were more potent inhibitors than their 1-alkyne counterparts. Exposure of toluene-grown B. cepacia G4 to alkynes resulted in the irreversible loss of toluene- and o-cresol-dependent O₂ uptake activities, while acetate- and 3-methylcatechol-dependent O₂ uptake activities were unaffected. Toluene-dependent O₂ uptake decreased upon the addition of 1-butyne in a concentration- and time-dependent manner. The loss of activity followed first-order kinetics, with apparent rate constants ranging from 0.25 min⁻¹ to 2.45 min⁻¹. Increasing concentrations of toluene afforded protection from the inhibitory effects of 1-butyne. Furthermore, oxygen, supplied as H₂O₂, was required for inhibition by 1-butyne. These results suggest that alkynes are specific, mechanism-based inactivators of toluene 2-monooxygenase in B. cepacia G4, although the simplest alkyne, acetylene, was relatively ineffective compared to longer alkynes. Alkene analogs of acetylene and propyne—ethylene and propylene—were not inactivators of toluene 2-monooxygenase activity in B. cepacia G4 but were oxidized to their respective epoxides, with apparent K_s and V_max values of 39.7 μM and 112.3 nmol min⁻¹ mg of protein⁻¹ for ethylene and 32.3 μM and 89.2 nmol min⁻¹ mg of protein⁻¹ for propylene.     

Streptomyces thermoautotrophicus sp. nov., a Thermophilic CO- and H2-Oxidizing Obligate Chemolithoautotroph

The novel thermophilic CO- and H₂-oxidizing bacterium UBT1 has been isolated from the covering soil of a burning charcoal pile. The isolate is gram positive and obligately chemolithoautotrophic and has been named Streptomyces thermoautotrophicus on the basis of G+C content (70.6 ± 0.19 mol%), a phospholipid pattern of type II, MK-9(H₄) as the major quinone, and other chemotaxonomic and morphological properties. S. thermoautotrophicus could grow with CO (t_d = 8 h), H₂ plus CO₂ (t_d = 6 h), car exhaust, or gas produced by the incomplete combustion of wood. Complex media or heterotrophic substrates such as sugars, organic acids, amino acids, and alcohols did not support growth. Molybdenum was required for CO-autotrophic growth. For growth with H₂, nickel was not necessary. The optimum growth temperature was 65°C; no growth was observed below 40°C. However, CO-grown cells were able to oxidize CO at temperatures of 10 to 70°C. Temperature profiles of burning charcoal piles revealed that, up to a depth of about 10 to 25 cm, the entire covering soil provides a suitable habitat for S. thermoautotrophicus. The K_m was 88 μl of CO liter⁻¹ and V_max was 20.2 μl of CO h⁻¹ mg of protein⁻¹. The threshold value of S. thermoautotrophicus of 0.2 μl of CO liter⁻¹ was similar to those of various soils. The specific CO-oxidizing activity in extracts with phenazinemethosulfate plus 2,6-dichlorophenolindophenol as electron acceptors was 246 μmol min⁻¹ mg of protein⁻¹. In exception to other carboxydotrophic bacteria, S. thermoautotrophicus CO dehydrogenase was able to reduce low potential electron acceptors such as methyl and benzyl viologens.     

Methyl mercury uptake by free and immobilized cyanobacterium

Methyl mercury uptake in free cells and different immobilizates of the cyanobacteriumNostoc calcicola has been examined. The general growth of the immobilized cyanobacterial cells could be negatively correlated with methyl mercury uptake. Alginate spheres proved most efficient in terms of uptake rate (0.48 nmol mg protein^–1 min^–1, 10 min) and total bioaccumulation (10.71 nmol mg protein^–1, 1 h) with a bioconcentration factor of 3.3×10³. Alginate biofilms showed a faster methyl mercury accumulation rate (0.83 nmol mg protein^–1 min^–1, 10 min) with a saturation of 10.28 nmol mg protein^–1 reached within only 30 min (bioconcentration factor, 3.1×10³). Foam preparations with a slow initial uptake approximated biofilms but were characterized by a lower bioconcentration factor (2.8×10³). Free cells, in comparison, maintained the initial slow rate of uptake (0.62 nmol mg protein^–1 min^–1, 10 min), saturating at 30 min (8.81 nmol mg protein^–1), and the resultant lowest bioconcentration factor (2.7×10³). Cell ageing (30 days) brought a drastic reduction (3-fold) in organomercury uptake by free cells while alginate spheres maintained the same potential. Foam preparations of the same age showed a significant improvement in methyl mercury uptake followed by only a marginal decline in alginate biofilms. Data are discussed in the light of the physiological efficiency and longevity of immobilized cells.     

Carbon Monoxide Oxidation by Clostridium thermoaceticum and Clostridium formicoaceticum

Cultures of Clostridium formicoaceticum and C. thermoaceticum growing on fructose and glucose, respectively, were shown to rapidly oxidize CO to CO₂. Rates up to 0.4 μmol min⁻¹ mg of wet cells⁻¹ were observed. Carbon monoxide oxidation by cell suspensions was found (i) to be dependent on pyruvate, (ii) to be inhibited by alkyl halides and arsenate, and (iii) to stimulate CO₂ reduction to acetate. Cell extracts catalyzed the oxidation of carbon monoxide with methyl viologen at specific rates up to 10 μmol min⁻¹ mg of protein⁻¹ (35°C, pH 7.2). Nicotinamide adenine dinucleotide, nicotinamide adenine dinucleotide phosphate and ferredoxin from C. pasteurianum were ineffective as electron acceptors. The catalytic mechanism of carbon monoxide oxidation was “ping-pong,” indicating that the enzyme catalyzing carbon monoxide oxidation can be present in an oxidized and a reduced form. The oxidized form was shown to react reversibly with cyanide, and the reduced form was shown to react reversibly with alkyl halides: cyanide inactivated the enzyme only in the absence of carbon monoxide, and alkyl halides inactivated it only in the presence of carbon monoxide. Extracts inactivated by alkyl halides were reactivated by photolysis. The findings are interpreted to indicate that carbon monoxide oxidation in the two bacteria is catalyzed by a corrinoid enzyme and that in vivo the reaction is coupled with the reduction of CO₂ to acetate. Cultures of C. acidi-urici and C. cylindrosporum growing on hypoxanthine were found not to oxidize CO, indicating that clostridia mediating a corrinoid-independent total synthesis of acetate from CO₂ do not possess a CO-oxidizing system.     

Maximizing power generation from dark fermentation effluents in microbial fuel cell by selective enrichment of exoelectrogens and optimization of anodic operational parameters

Objective

To selectively enrich an electrogenic mixed consortium capable of utilizing dark fermentative effluents as substrates in microbial fuel cells and to further enhance the power outputs by optimization of influential anodic operational parameters.

Results

A maximum power density of 1.4 W/m³ was obtained by an enriched mixed electrogenic consortium in microbial fuel cells using acetate as substrate. This was further increased to 5.43 W/m³ by optimization of influential anodic parameters. By utilizing dark fermentative effluents as substrates, the maximum power densities ranged from 5.2 to 6.2 W/m³ with an average COD removal efficiency of 75% and a columbic efficiency of 10.6%.

Conclusion

A simple strategy is provided for selective enrichment of electrogenic bacteria that can be used in microbial fuel cells for generating power from various dark fermentative effluents.

     

Towards a hybrid anaerobic digester-microbial fuel cell integrated energy recovery system: An overview of the development of an electrogenic biofilm

An electrogenic biofilm was developed on a macroporous chitosan-carbon nanotube (CHIT-CNT) electrode under constant poised potential (?0.25 V versus Ag/AgCl reference electrode) and flow through conditions utilizing the effluent of an anaerobic digester as both the inoculant and substrate for the electrogenic biofilm. After 125 days of inoculation the bioelectrode demonstrated an open circuit potential of ?0.62 V and a current density of 9.43 μA cm^?3 (at ?0.25 V). Scanning electron microscopy images indicate thorough surface coverage of the biofilm with a high density of bacterial nanowires physically connecting bacteria to bacteria and bacteria to carbon nanotube (electrode surface) suggesting the nanowires are electrically conductive. DGGE was used to identify the major bacterial and archaeal populations.     

Purification and Characterization of an Acetyl Xylan Esterase from Bacillus pumilus

Bacillus pumilus PS213 was found to be able to release acetate from acetylated xylan. The enzyme catalyzing this reaction has been purified to homogeneity and characterized. The enzyme was secreted, and its production was induced by corncob powder and xylan. Its molecular mass, as determined by gel filtration, is 190 kDa, while sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed a single band of 40 kDa. The isoelectric point was found to be 4.8, and the enzyme activity was optimal at 55°C and pH 8.0. The activity was inhibited by most of the metal ions, while no enhancement was observed. The Michaelis constant (K_m) and V_max for α-naphthyl acetate were 1.54 mM and 360 μmol min⁻¹ mg of protein⁻¹, respectively.     

Transition from Anaerobic to Aerobic Growth Conditions for the Sulfate-Reducing Bacterium Desulfovibrio oxyclinae Results in Flocculation

A chemostat culture of the sulfate-reducing bacterium Desulfovibrio oxyclinae isolated from the oxic layer of a hypersaline cyanobacterial mat was grown anaerobically and then subjected to gassing with 1% oxygen, both at a dilution rate of 0.05 h⁻¹. The sulfate reduction rate under anaerobic conditions was 370 nmol of SO₄²⁻ mg of protein⁻¹ min⁻¹. At the onset of aerobic gassing, sulfate reduction decreased by 40%, although viable cell numbers did not decrease. After 42 h, the sulfate reduction rate returned to the level observed in the anaerobic culture. At this stage the growth yield increased by 180% compared to the anaerobic culture to 4.4 g of protein per mol of sulfate reduced. Protein content per cell increased at the same time by 40%. The oxygen consumption rate per milligram of protein measured in washed cell suspensions increased by 80%, and the thiosulfate reduction rate of the same samples increased by 29% with lactate as the electron donor. These findings indicated possible oxygen-dependent enhancement of growth. After 140 h of growth under oxygen flux, formation of cell aggregates 0.1 to 3 mm in diameter was observed. Micrometer-sized aggregates were found to form earlier, during the first hours of exposure to oxygen. The respiration rate of D. oxyclinae was sufficient to create anoxia inside clumps larger than 3 μm, while the levels of dissolved oxygen in the growth vessel were 0.7 ± 0.5 μM. Aggregation of sulfate-reducing bacteria was observed within a Microcoleus chthonoplastes-dominated layer of a cyanobacterial mat under daily exposure to oxygen concentrations of up to 900 μM. Desulfonema-like sulfate-reducing bacteria were also common in this environment along with other nonaggregated sulfate-reducing bacteria. Two-dimensional mapping of sulfate reduction showed heterogeneity of sulfate reduction activity in this oxic zone.     

微生物燃料电池利用乳酸产电性能与微生物群落分布特征

【目的】为探讨以乳酸为基质的微生物燃料电池(Microbial fuel cell,MFC)产电性能以及微生物群落在阳极膜、悬浮液、阳极沉淀污泥中的分布特征,【方法】试验建立了双室MFC,以乳酸为阳极主要碳源,研究了反应器的启动过程及产电效能,同时以电镜和PCR-变性梯度凝胶电泳(Denaturing gradient gelelectrophoresis,DGGE)技术解析了微生物群落的空间分布特征。【结果】结果表明,反应器启动第7天时外电压达到0.56 V,当外阻为80Ω时,电流密度为415 mA/m2,MFC的功率密度达到最大值82 mW/m2。电镜观察发现大量杆菌附着在阳极表面,结合较为紧密;DGGE图谱显示阳极膜表面微生物与种泥最为相似,与阳极悬浮液、底部沉淀污泥中的主要菌群一致,条带序列与睾丸酮丛毛单胞菌(Comamonas testosteroni)和布氏弓形菌(Arcobacter butzleri)等最为相似。【结论】本研究表明以乳酸为基质MFC可产生较高的功率密度,阳极附着的优势菌与接种污泥来源密切相关。