Enhancement of the photoluminescence and long afterglow properties of Sr2MgSi2O7:Eu2+ phosphor by Dy3+ co‐doping

Sr₂MgSi₂O₇:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX), and photo‐, thermo‐ and mechanoluminescence spectroscopic techniques. The phase structure of the sintered phosphor was an akermanite type structure, which belongs to tetragonal crystallography. The thermoluminescence properties of these phosphors were investigated and compared. Under ultraviolet light excitation, the emission spectra of both prepared phosphors were composed of a broad emission band peaking at 470 nm. When the Sr₂MgSi₂O₇:Eu²⁺ phosphor was co‐doped with Dy³⁺, the photoluminescence (PL), afterglow and mechanoluminescence (ML) intensity were strongly enhanced. The decay graph indicated that both the sintered phosphors contained fast decay and slow decay processes. The ML intensities of Sr₂MgSi₂O₇:Eu²⁺ and Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphors were increased proportionally with increasing impact velocity, a finding that suggests that these phosphors could be used as sensors to detect the stress of an object. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural characterization and optical properties of Ca2MgSi2O7:Eu2+,Dy3+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was prepared by the solid‐state reaction method under a weak reducing atmosphere. The obtained phosphor was characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FT‐IR) techniques. The phase structure of the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor was akermanite type, which is a member of the melilite group. The surface morphology of the sintered phosphor was not uniform and phosphors aggregated tightly. EDX and FT‐IR spectra confirm the elements present in the Ca₂MgSi₂O₇:Eu²⁺,Dy³⁺ phosphor. Under UV excitation, a broadband emission spectrum was found. The emission spectra observed in the green region centered at 535 nm, which is due to the 4f–5d transition. The mechanoluminescence (ML) intensity of the prepared phosphor increased linearly with increases in the mechanical load. The ML spectra were similar to the photoluminescence (PL), which indicates that ML is emitted from the same emitting center of Eu²⁺ ions as PL. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence and energy‐transfer properties of color‐tunable Ca2Mg0.25Al1.5Si1.25O7:Ce3+/Eu2+/Tb3+ phosphors for ultraviolet light‐emitting diodes

A series of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺/Eu²⁺/Tb³⁺ phosphors was been prepared via a conventional high temperature solid‐state reaction and their luminescence properties were studied. The emission spectra of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺ and Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Tb³⁺ phosphors show not only a band due to Ce³⁺ ions (409 nm) but also as a band due to Eu²⁺ (520 nm) and Tb³⁺ (542 nm) ions. More importantly, the effective energy transfer from Ce³⁺ to Eu²⁺ and Tb³⁺ ions was confirmed and investigated by emission/excitation spectra and luminescent decay behaviors. Furthermore, the energy level scheme and energy transfer mechanism were investigated and were demonstrated to be of resonant type via dipole–dipole (Ce³⁺ to Eu²⁺) and dipole–quadrupole (Ce³⁺ to Tb³⁺) reactions, respectively. Under excitation at 350 nm, the emitting color could be changed from blue to green by adjusting the relative doping concentration of Ce³⁺ and Eu²⁺ ions as well as Ce³⁺ and Tb³⁺ ions. The above results indicate that Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺/Tb³⁺ are promising single‐phase blue‐to‐green phosphors for application in phosphor conversion white‐light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Persistent luminescence of CaMgSi2O6:Eu2+,Dy3+ and CaMgSi2O6:Eu2+,Ce3+ phosphors prepared using the solid‐state reaction method

CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were synthesized using the solid‐state reaction method. X‐Ray diffraction (XRD) and photoluminescence (PL) analyses were used to characterize the phosphors. The XRD results revealed that the synthesized CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were crystalline and are assigned to the monoclinic structure with a space group C2/c. The calculated crystal sizes of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors with a main (221) diffraction peak were 44.87 and 53.51 nm, respectively. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed the proper preparation of the sample. The PL emission spectra of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors have a broad band peak at 444.5 and 466 nm, respectively, which is due to electronic transition from 4f⁶5d¹ to 4f⁷. The afterglow results indicate that the CaMgSi₂O₆:Eu²⁺,Dy³⁺ phosphor has better persistence luminescence than the CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of green‐emitting Ca2MgSi2O7:Eu2+ phosphor by a solid‐state reaction method

A europium (Eu)‐doped di‐calcium magnesium di‐silicate phosphor, Ca₂MgSi₂O₇:Eu²⁺, was prepared using a solid‐state reaction method. The phase structure, particle size, surface morphology, elemental analysis, different stretching mode and luminescence properties were analyzed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM) with energy dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, photoluminescence (PL) and mechanoluminescence (ML). The phase structure of Ca₂MgSi₂O₇:Eu²⁺ was an akermanite‐type structure, which belongs to the tetragonal crystallography with space group P4?2₁m; this structure is a member of the melilite group and forms a layered compound. The surface of the prepared phosphor was not found to be uniform and particle distribution was in the nanometer range. EDX and FTIR confirm the components of Eu²⁺‐doped Ca₂MgSi₂O₇ phosphor. Under UV excitation, the main emission peak appeared at 530 nm, belonging to the broad emission ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The ML intensity of the prepared phosphor increased linearly with increasing impact velocity. A CIE color chromaticity diagram and ML spectrum confirmed that the prepared Ca₂MgSi₂O₇:Eu²⁺ phosphor would emit green color and the ML spectrum was similar to that of PL, which indicated that ML is emitted from the same center of Eu²⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties and energy transfer in Ce3+/Dy3+ co‐doped Sr3MgSi2O8 phosphors for potential application in ultraviolet white light‐emitting diodes

Sr₃MgSi₂O₈:Ce³⁺, Dy³⁺ phosphors were prepared by a solid‐state reaction technique and the photoluminescence properties were investigated. The emission spectra show not only a band due to Ce³⁺ ions (403 nm) but also as a band due to Dy³⁺ ions (480, 575 nm) (UV light excitation). The photoluminescence properties reveal that effective energy transfer occurs in Ce³⁺/Dy³⁺ co‐doped Sr₃MgSi₂O₈ phosphors, and the co‐doping of Ce³⁺ could enhance the emission intensity of Dy³⁺ to a certain extent by transferring its energy to Dy³⁺. The Ce³⁺/Dy³⁺ energy transfer was investigated by emission/excitation spectra, and photoluminescence decay behaviors. In Sr_2.94MgSi₂O₈:0.01Ce³⁺, 0.05Dy³⁺ phosphors, the fluorescence lifetime of Dy³⁺ (from 3.35 to 27.59 ns) is increased whereas that of Ce³⁺ is greatly decreased (from 43.59 to 13.55 ns), and this provides indirect evidence of the Ce³⁺ to Dy³⁺ energy transfer. The varied emitted color of Sr₃MgSi₂O₈:Ce³⁺, Dy³⁺ phosphors from blue to white were achieved by altering the concentration ratio of Ce³⁺ and Dy³⁺. These results indicate Sr₃MgSi₂O₈:Ce³⁺, Dy³⁺ may be as a candidate phosphor for white light‐emitting diodes. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescent properties of single‐phase Ba2‐x‐1.5y‐1.5zP2O7:xEu2+,yCe3+, zTb3+ phosphors for white light‐emitting diode

A series of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors was synthesized via a co‐precipitation method, then their crystal structure, quantum efficiency and luminescent properties were analyzed by XRD and FL, respectively. The results showed that these phosphors not only presented the excitation characteristics of Ba₂P₂O₇:xEu²⁺,zTb³⁺, but also exhibited that of the Ba₂P₂O₇:yCe³⁺,zTb³⁺ phosphor. Meanwhile, the tri‐doped phosphor showed a stronger absorption around 320 nm in contrast with the Eu²⁺/Ce³⁺:Tb³⁺ co‐doped phosphor. Not only can energy transfer from Ce³⁺→Eu²⁺ be observed; the energy transfer mechanism from Eu²⁺ to Tb³⁺ is discussed in the tri‐doped system. Ce³⁺ affects the luminescence properties of Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors just as the sensitizer whereas Eu²⁺ is considered both as the sensitizer and the activator. The chromaticity coordinates of tri‐doped phosphors excited at 320 nm stayed steadily in the bluish‐white light region,and the emitted color and color temperature (CCT) of these phosphors could be tuned by adjusting the relative contents of Eu²⁺, Ce³⁺ and Tb³⁺. Hence, the single phase Ba₂P₂O₇:xEu²⁺,yCe³⁺,zTb³⁺ phosphors may be considered as potential candidates for white light‐emitting diodes.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence properties of Eu2+ doped and Eu2+,Dy3+ co‐doped Ba2MgSi2O7 phosphors

In this work, we report the preparation, characterization, comparison and luminescence mechanisms of Eu²⁺‐doped and Eu²⁺,Dy³⁺‐co‐doped Ba₂MgSi₂O₇ (BMSO) phosphors. Prepared phosphors were synthesized via a high temperature solid‐state reaction method. All prepared phosphors appeared white. The phase structure, particle size, and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscopy (TEM) and energy‐dispersive X‐ray (EDX) analysis. The luminescence properties of the phosphors were investigated by thermoluminescence (TL) and photoluminescence (PL). The PL excitation and emission spectra of Ba₂MgSi₂O₇:Eu²⁺ showed the peak to be around 381 nm and 490 nm respectively. The PL excitation spectrum of Ba₂MgSi₂O₇:Eu²⁺Dy³⁺ showed the peak to be around 341 nm and 388 nm, and the emission spectrum had a broad band around 488 nm. These emissions originated from the 4f⁶ 5d¹ to 4f⁷ transition of Eu²⁺. TL analysis revealed that the maximum TL intensity was found at 5 mol% of Eu²⁺ doping in Ba₂MgSi₂O₇ phosphors after 15 min of ultraviolet (UV) light exposure. TL intensity was increased when Dy³⁺ ions were co‐doped in Ba₂MgSi₂O₇:Eu²⁺ and maximum TL intensity was observed for 2 mol% of Dy³⁺. TL emission spectra of Ba_1.95MgSi₂O₇:0.05Eu²⁺ and Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors were found at 500 nm. TL intensity increased with UV exposure time up to 15 min, then decreased for the higher UV radiation dose for both Eu doping and Eu,Dy co‐doping. The trap depths were calculated to be 0.54 eV for Ba_1.95MgSi₂O₇:0.05Eu²⁺ and 0.54 eV and 0.75 eV for Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors. It was observed that co‐doping with small amounts of Dy³⁺ enhanced the thermoluminescence properties of Ba₂MgSi₂O₇ phosphor. Copyright © 2016 John Wiley & Sons, Ltd. [Correction added on 5 April 2016, after first online publication: The following parts of the abstract have been edited for consistency. '4f65d1' has been corrected to '4f⁶ 5d¹', '4f7' has been corrected to '4f⁷', 'Ba1.95' has been corrected to 'Ba_1.95' and 'Ba1.93' has been corrected to 'Ba_1.93' respectively.]     

Design,synthesis and luminescence properties of Ba2YB2O6Cl‐ and Ba2YB2O6F‐based phosphors

Using a high‐temperature solid‐state reaction, the chlorine in Ba₂YB₂O₆Cl is gradually replaced by F, and a new compound with the nominal chemical formula Ba₂YB₂O₆F and two phosphors doped with Ce³⁺ and Eu³⁺, respectively, are obtained. X‐Ray diffraction and photoluminescence spectroscopy are used to characterize the as‐synthesized samples. The as‐synthesized Ba₂YB₂O₆Cl exhibits bright blue emission in the spectral range ~ 330–410 nm with a maximum around 363 nm under X‐ray or UV excitation. Ba₂YB₂O₆F:0.01Ce³⁺ exhibits blue emission in the range ~ 340–570 nm with a maximum around 383 nm. Ba₂YB₂O₆F:0.01Eu³⁺ exhibits a predominantly ⁵D₀–⁷ F₂ emission (~610 nm) and the relative intensities of the ⁵D₀–⁷ F_0,1,2 emissions are tunable under different wavelength UV excitation. The luminescence behaviors of the two phosphors are explained simply in terms of the host composition and site occupancy probability of Ce³⁺ and Eu³⁺, respectively. The results indicate that these phosphors have potential application as a blue phosphor or as a red phosphor. Copyright © 2014 John Wiley & Sons, Ltd.     

Optical properties and energy transfer of Eu2+/Ce3+ co‐activated Na3Ca6(PO4)5 phosphor

Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ phosphors were prepared using a combustion‐assisted synthesis method. X‐Ray powder diffraction (XRD) analysis confirmed the formation of a Na₃Ca₆(PO₄)₅ crystal phase. Na₃Ca₆(PO₄)₅:Eu²⁺ phosphors have an efficient bluish‐green emission band that peaks at 489 nm, whereas Ce³⁺‐doped Na₃Ca₆(PO₄)₅ showed a bright emission band at 391 nm. Analysis of the experimental results suggests that enhancement of the Eu²⁺ emission intensity in co‐doped Na₃Ca₆(PO₄)₅:Eu²⁺,Ce³⁺ phosphors is due to a resonance‐type energy transfer from Ce³⁺ to Eu²⁺ ions, which is predominantly governed by an exchange interaction mechanism. These results indicate that Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ is potentially useful as a highly efficient, bluish‐green emitting, UV‐convertible phosphor for white‐light‐emitting diodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of cooling rate on the microstructure and luminescence properties of Sr2MgSi2O7:Eu2+,Dy3+ materials

Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long afterglow materials were prepared by a high‐temperature solid‐state reaction method with different cooling rates. The cooling rate had a slight effect on X‐ray diffraction patterns and photoluminescence performance, but significantly modified the grain boundaries and long afterglow properties of the Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ materials. When the cooling rate was 1°C/min, grains remained intact with clear grain boundaries. As the cooling rate increased from 1°C/min to 5°C/min, some grain boundaries became indistinguishable. The afterglow properties were optimized, presenting best performance at the cooling rate of 3°C/min. The trap state was investigated and illustrated through thermoluminescence curves. The depths of the traps of all the samples were unchanged, whereas densities changed to a large extent, leading to different afterglow properties. The retrapping process is discussed based on the afterglow curves.     

Synthesis and effect of Ce and Mn co‐doping on photoluminescence characteristics of Ca6AlP5O20:Eu novel phosphors

A series of Ca₆AlP₅O₂₀ doped with rare earths (Eu and Ce) and co‐doped (Eu, Ce and Eu,Mn) were prepared by combustion synthesis. Under Hg‐free excitation, Ca₆AlP₅O₂₀:Eu exhibited Eu²⁺ (486 nm) emission in the blue region of the spectrum and under near Hg excitation (245 nm), Ca₆AlP₅O₂₀:Ce phosphor exhibited Ce³⁺ emission (357 nm) in the UV range. Photoluminescence (PL) peak intensity increased in Ca₆AlP₅O₂₀:Eu,Ce and Ca₆AlP₅O₂₀:Eu, Mn phosphors due to co‐activators of Ce³⁺ and Mn²⁺ ions. As a result, these ions played an important role in PL emission in the present matrix. Ca₆AlP₅O₂₀:Eu, Ce and Ca₆AlP₅O₂₀:Eu, Mn phosphors provided energy transfer mechanisms via Ce³⁺ → Eu²⁺ and Eu²⁺ → Mn²⁺, respectively. Eu ions acted as activators and Ce ions acted as sensitizers. Ce emission energy was well matched with Eu excitation energy in the case of Ca₆AlP₅O₂₀:Eu, Ce and Eu ions acted as activators and Mn ions acted as sensitizers in Ca₆AlP₅O₂₀:Eu, Mn. This study included synthesis of new and efficient phosphate phosphors. The impact of doping and co‐doping on photoluminescence properties and energy transfer mechanisms were investigated and we propose a feasible interpretation. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and characterization of blue long‐lasting BaCa2Al8O15:Eu2+, Dy3+ phosphor

We have synthesized and characterized a new BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ phosphor prepared by the combustion method. X‐ray diffraction, thermoluminescence, scanning electron microscope, time decay and optical spectral analysis photoluminescence excitation, emission spectra were used to characterize the phosphors. Broadband ultraviolet excited luminescence of the BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ was observed in the blue region (λ_max = 435 nm) due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the Eu²⁺ ion. Scanning electron microscopy has been used for exploring the morphological properties of the prepared phosphors. The BaCa₂Al₈O₁₅:Eu²⁺ phosphor has a blue afterglow when Dy³⁺ ions were co‐doped. The thermoluminescence spectra show that the Dy³⁺ ion induces a proper trap in the phosphor with a depth of 0.67 eV and results in a long afterglow phosphorescence. Copyright © 2013 John Wiley & Sons, Ltd.     

Photoluminescence properties of Ca2Al2O5:RE3+ (RE = Eu,Dy and Tb) phosphors for solid state lighting

Ca₂Al₂O₅:Eu³⁺, Ca₂Al₂O₅:Dy³⁺ and Ca₂Al₂O₅:Tb³⁺ phosphors were synthesized using a combustion synthesis method. The prepared phosphors were characterized by X‐ray powder diffraction for phase purity, by scanning electron microscopy for morphology, and by photoluminescence for emission and excitation measurements. The Ca₂Al₂O₅:Eu³⁺ phosphors could be efficiently excited at 396 nm and showed red emission at 594 nm and 616 nm due to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions. Dy³⁺‐doped phosphors showed blue emission at 482 nm and yellow emission at 573 nm. Ca₂Al₂O₅:Tb³⁺ phosphors showed emission at 545 nm when excited at 352 nm. Concentration quenching occurred in both Eu³⁺ and Dy³⁺phosphors at 0.5 mol%. Photoluminescence results suggested that the aluminate‐based phosphor could be a potential candidate for application in environmentally friendly based lighting technologies.     

The long rod-shaped Sr2MgSi2O7:Eu2+,Dy3+ with ultrahigh afterglow performance

The afterglow properties of long afterglow luminescent materials are greatly affected by their defects, which are distributed on the grain surface. Increasing the exposed surface area is an important method to improve the afterglow performance. In this research, long rod-shaped long afterglow materials Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ were prepared using the hydrothermal-coprecipitation method. When the reaction time reached 96 h, the length of the afterglow materials could grow to 2 mm, and the sintering temperature was just 1150°C. The emission spectra of all obtained samples upon excitation at 397 nm had a maximum of 465 nm, which belonged to the representative transition of Eu²⁺. The initial brightness was 1.35 cd/m². The afterglow time could reach 19 h, giving a good afterglow performance. The research on this kind of material has essential significance in the exploration of luminescence mechanisms and their applications.     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Tunable luminescence and energy transfer in Ca3SiO4Cl2:Ce3+,Li+,Mn2+,Eu2+ phosphors

A series of color‐tunable Ca_{3–2x‐y‐z}SiO₄Cl₂ (CSC):xCe³⁺,xLi⁺,yMn²⁺,zEu²⁺ phosphors with low temperature phase structure was synthesized via the sol–gel method. An energy transfer process from Ce³⁺ to Mn²⁺ in CSC:0.01Ce³⁺,0.01Li⁺,yMn²⁺ (y = 0.03–0.09) and the mechanism was verified to be an electric dipole–dipole interaction. The Ce³⁺ and Mn²⁺ emission intensities were greatly enhanced by co‐doping Eu²⁺ ions into CSC:0.01Ce³⁺,0.01Li⁺,0.07Mn²⁺ phosphors due to competitive energy transfers from Eu²⁺/Ce³⁺ to Mn²⁺, and Ce³⁺ to Eu²⁺. Under 332 nm excitation, CSC:0.01Ce³⁺,0.01Li+,0.07Mn²⁺,zEu²⁺ (z = 0.0005–0.002) exhibited tunable emission colors from green to white with coexisting orange, green and violet‐blue emissions. These phosphors could have potential application in white light‐emitting diodes.     

The luminescence properties of Sr2–1.5x−1.5yP2O7:xDy3+,yCe3+ phosphor for near‐UV‐based white LEDs synthesized by a chemical co‐precipitation method

A series of Sr₂P₂O₇:Dy³⁺, Sr₂P₂O₇:Ce³⁺ and Sr₂P₂O₇:Dy³⁺,Ce³⁺ phosphors was synthesized via the one‐step calcination process for the precursors prepared by co‐precipitation methods. The phases, morphology, quantum efficiency and photoluminescence properties of the obtained phosphors were characterized systematically. These results show that the near‐spherical particles prepared through calcining the precursors by means of ammonium dibasic phosphate co‐precipitation (method 3) have the smallest particle size and strongest emission intensity among the three methods in the paper. With Dy³⁺ concentration increasing in Sr₂P₂O₇:Dy³⁺ phosphors, the luminescence intensity first increases, reaches maximum, and then decreases. A similar trend was followed by Sr₂P₂O₇:Ce³⁺ with Ce³⁺concentration increasing. A successful attempt was made to initiate the energy transfer mechanism from Ce³⁺ to Dy³⁺ in the host lattice and an overlap between the emission band of Ce³⁺ and the excitation band of Dy³⁺ indicated that the Ce³⁺ → Dy³⁺ energy transfer may indeed exist. It is clear that the photoluminescence intensity of Dy³⁺ as well as the quantum efficiency of the phosphor can be enhanced markedly by co‐doping Ce³⁺. Sr₂P₂O₇:Dy³⁺,Ce³⁺ has its (CIE) chromaticity coordinates in the bluish‐white‐light region, near the standard illuminant D₆₅. The CIE 1913 chromaticity coordinates of Sr₂P₂O₇:Dy³⁺ phosphors fall in the white‐light region, and are adjacent to the ideal white‐light coordinates. In addition, the colour temperature and colour tone of Sr₂P₂O₇:Dy³⁺ could be adjusted by changing the relative concentration of Dy³⁺. In short, Sr₂P₂O₇:Dy³⁺ can be a promising single‐phased white‐light emitting phosphor for near‐UV (NUV) w‐LEDs.     

Effect of replacement of Ca by Zn on the structure and optical property of CaTiO3:Eu3+ red phosphor prepared by sol‐gel method

Eu³⁺‐doped calcium titanate red phosphors, Ca_1‐xZn_xTiO₃:Eu³⁺, were prepared by the sol‐gel method. The structure of prepared Ca_1‐xZn_xTiO₃:Eu³⁺ phosphors were investigated by X‐ray diffraction and infrared spectra. Due to the ⁵D₀ → ⁷F_1–3 electron transitions of Eu³⁺ ions, photoluminescence spectra showed a red emission at about 619 nm under excitation of 397 nm and 465 nm, respectively. When zinc was added to the host, the luminescent intensity of Ca_1‐xZn_xTiO₃:Eu³⁺ was markedly improved several fold compared with that of CaTiO₃:Eu³⁺. Ca_0.9Zn_0.1TiO₃:Eu³⁺ also had higher luminescence intensity than the commercially available Y₂O₃:Eu³⁺ phosphors under UV light excitation. Copyright © 2014 John Wiley & Sons, Ltd.