Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

Growth of Escherichia coli, Pichia pastoris and Bacillus cereus in the Presence of the Ionic Liquids [BMIM][BF4] and [BMIM][PF6] and Organic Solvents

The influence of the two most commonly used ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate, [BMIM][BF₄], 1-butyl-3-methyl imidazolium hexafluorophosphate, [BMIM][PF₆]) and three selected organic solvents (dimethylsulfoxide, ethanol, methanol) on the growth of Escherichia coli, Pichia pastoris and Bacillus cereus was investigated. [BMIM][BF₄] was toxic at 1% (v/v) on all three microorganisms. The minimal inhibitory concentration (MIC) of [BMIM][BF₄] on E. coli growth was between 0.7 and 1% (v/v). In contrast, [BMIM][PF₆] was less toxic for P. pastoris and B. cereus, whereas E. coli was not able to tolerate [BMIM][PF₆] (MIC value: 0.3–0.7% v/v). Growth of P. pastoris was unaffected by [BMIM][PF₆] at 10% (v/v). Similar results were found for dimethylsulfoxide. Thus, ionic liquids (ILs) can have substantial inhibitory effects on the growth of microorganisms, which should be taken into account for environmental reasons as well as for the use of ILs as co-solvents in biotransformations. Revisions requested 2 November 2005; Revisions received 20 December 2005     

Effects of imidazolium room temperature ionic liquids on the fluorescent properties of norfloxacin

The effects of 12 imidazolium room temperature ionic liquids (RTILs), including [C_nmim]BF₄, [C_nmim]PF₆, and [C_nmim]Br (n = 4, 6, 8, 10), on the fluorescent properties of norfloxacin were examined. The fluorescence intensity of norfloxacin at 0.1 mg/L in methanol significantly increased with the addition of [C_nmim]BF₄ and [C_nmim]PF₆ into the solvent at 0.1–15.0%. The sensitizing effect may result from the higher viscosity of the RTILs–methanol mixture solvent than that of the methanol itself. However, the quenching effect on fluorescence of norfloxacin was observed in [C_nmim]Br–methanol solvent. The fluorescence intensities of norfloxacin decreased with an increase in the alkyl chain length of the alkyl substituents of the imidazolium ring of RTILs. The main interaction between the RTILs and norfloxacin is not by hydrogen bonding. The fact, that some RTILs can significantly sensitize fluorescence of norfloxacin, indicates that RTILs could be a group of promising solvents for development of sensitive spectrofluorimetric methods for determination of norfloxacin at ultra‐trace levels in environmental samples. Copyright © 2011 John Wiley & Sons, Ltd.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

H, F-HOESY and PGSE diffusion studies on ionic liquids: The effect of co-solvent on structure

¹H, ¹⁹F-HOESY studies on the ionic liquid based on 1-butyl-3-methylimidazolium tetrafluoroborate, [C₄C₁im]BF₄, [C₄C₁im][N(OTf)₂], and, partially, [C₄C₁im]PF₆, are reported. The addition of methanol separates the ions; however, in dichloromethane solution the anions and cations show strong HOESY contacts even after dilution and taken together with the PGSE diffusion measurements, the data suggest strong ion pairing in this solvent.     

Enzyme Catalysed Synthesis in Ambient Temperature Ionic Liquids

The activity of three different lipases, a glycosidase and a protease in ionic liquids has been studied. Ambient temperature ionic liquids are a new class of solvents that are nonvolatile and nonflammable and thus an interesting alternative to classical organic solvents. Monitoring the synthesis of a simple ester, all lipases were found to exhibit both excellent activity and stability in the non-polar ionic liquid 1-butyl-3-methylimidazohum hexaflurophosphate ([bmin][PF₆], 1). Furthermore, β-galactosidase from E. coli and the Subtilisin protease Savinase^TM were both found to exhibit a hydrolytic activity in a 50% aqueous solution of the water-miscible ionic liquid 1-butyl-3-methyhmidazoUum tetra-fluoroborate ([bmin][BF₄], 2) comparable to the activity observed in 50% aqueous solutions of ethanol and acetonitrile.     

Circular Dichroism Studies on Intermolecular Interactions of Amphotericin B in Ionic Liquid‐Rich Environments

Aggregation of amphotericin B (AmB) in an ionic liquid‐rich environment was investigated using circular dichroism (CD) spectroscopy. It was found that nature of the ionic liquids’ anion had a strong impact not only on the aggregation of AmB, but more importantly on the nature of AmB aggregates, as observed in the asymmetry of the exciton couplet of the aggregate in CD spectra. Unique CD signals for AmB aggregates were observed in three different 1‐butyl‐3‐methylimidazolium ionic liquid solutions: [C₄‐mim]Br favored the formation of AmB aggregates that were similar to those found in water, whereas [C₄‐mim]BF₄ and [C₄‐mim]NO₃ produced AmB aggregates that were different from each other and those found in water. The obtained results suggest that the designer solvent ability of ionic liquids could be expanded to address numerous intermolecular processes. Chirality 25:487‐492, 2013. © 2013 Wiley Periodicals, Inc.     

Hydroxynitrile Lyase Catalysis in Ionic Liquid-containing Systems

The cleavage of mandelonitrile catalysed by hydroxynitrile lyases (HNL) from Prunus amygdalus (PaHNL) and Manihot esculenta (MeHNL) proceeded more rapidly in monophasic aqueous media containing 1-propyl-3-methylimidazolium tetrafluoroborate [C₄MIm][BF₄] than in media containing acetonitrile or THF. Both HNLs were much more thermostable in [C₄MIm][BF₄] than in acetonitrile or THF. The addition of each of the four ionic liquids 1-butyl-, 1-pentyl- and 1-hexyl-3-methylimidazolium tetrafluoroborates at 2–6% (v/v in the aqueous phase) increased both the enzyme activity and the product e.e. in the PaHNL-catalysed transcyanation in an aqueous/DIPE biphasic system. However, MeHNL was inactivated by the ionic liquids, as indicated by the decreased reaction rate, substrate conversion and product e.e.     

Enantioselective acylation of (RS)-phenylethylamine catalysed by lipases

The enzymatic acylation of (RS)-phenylethylamine with different acyl donors catalysed by lipases, was studied in organic solvents with different hydrophobicities and in mixtures with ionic liquids ((ILs); [BMIm][BF₄], [BMIm][SCN], [BMIm][Cl] and [BMIm][PF₆]). Using lipases from Candida antarctica B (CAL-B) and from Aspergillus niger higher conversion degrees and E-values were obtained with ethyl acetate as the acyl donor. When CAL-B was used as the biocatalyst, in a two-phase system formed by [BMIm][X]/dichloromethane or [BMIm][X]/chloroform, the selectivity was better than that obtained in pure organic solvents. The selectivity was found to be related to individual anions in ILs. In this reaction, the ion effectiveness in enhancing the enzyme selectivity followed the series: Cl⁻ > SCN⁻ > BF₄⁻ > PF₆⁻ in mixtures with dichloromethane, and PF₆⁻ > BF₄⁻ > SCN⁻ > Cl⁻ in mixtures with chloroform.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Effect of replacing [NTf2] by [PF6] anion on the [BMIm][NTf2] ionic liquid confined by gold

The effect of replacing bis(trifluoromethylsulphonyl)imide ([NTf₂]) by hexafluorophosphate ([PF₆]) in room temperature ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide ([BMIm][NTf₂]) confined between two gold interfaces is herein reported through molecular dynamics simulations using all-atom non-polarisable force-fields. Five systems were studied ranging from pure [BMIm][NTf₂] to pure [BMIm][PF₆], with [PF₆] molar fractions of 0, 0.125, 0.25, 0.375 and 0.5. Special attention was drawn to investigate the impact of the [PF₆] anion on the IL, in particular on the first layers of the liquid in close contact with the solid gold surface.     

Peroxidase biocatalysis in water-soluble ionic liquids: activity,kinetic and thermal stability

Abstract

The activity and stability of commercial peroxidase was investigated in the presence of five 1-alkyl-3-methylimidazolium-based ionic liquids (ILs) with either bromide or chloride anions: [C_xmim][X]. The peroxidase activity and stability were better for the shorter alkyl chain lengths of the ILs and peroxidase was more stable in the presence of the bromide anion, rather than chloride. The thermal inactivation profile was studied from 45 to 60 °C in [C₄mim][Cl] and [C₄mim][Br]. The activation energy was also determined. Kinetic analysis of the enzyme in the presence of the [C₄mim][Br] or control (buffer solution) showed that the KM value increased 5-fold and Vm decreased 13-fold in the presence of the IL. The increase in KM indicates that this IL can reduce the binding affinity between substrate and enzyme.     

Separation of Tryptophan Enantiomers by Ligand‐Exchange Chromatography With Novel Chiral Ionic Liquids Ligand

Chiral ionic liquids (CILs) with amino acids as cations have been applied as novel chiral ligands coordinated with Cu²⁺ to separate tryptophan enantiomers in ligand exchange chromatography. Four kinds of amino acid ionic liquids, including [L‐Pro][CF₃COO], [L‐Pro][NO₃], [L‐Pro]₂[SO₄], and [L‐Phe][CF₃COO] were successfully synthesized and used for separation of tryptophan enantiomers. To optimize the separation conditions, [L‐Pro][CF₃COO] was selected as the model ligand. Some factors influencing the efficiency of chiral separation, such as copper ion concentration, CILs concentration, methanol ratio (methanol/H₂O, v/v), and pH, were investigated. The obtained optimal separation conditions were as follows: 8.0 mmol/L Cu(OAc)₂, 4.0 mmol/L [L‐Pro][CF₃COO] ,and 20% (v/v) methanol at pH 3.6. Under the optimum conditions, acceptable enantioseparation of tryptophan enantiomers could be observed with a resolution of 1.89. The results demonstrate the good applicability of CILs with amino acids as cations for chiral separation. Furthermore, a comparative study was also conducted for exploring the mechanism of the CILs as new ligands in ligand exchange chromatography. Chirality 26:160–165, 2014. © 2014 Wiley Periodicals, Inc.     

Enzymatic synthesis of poly(ε-caprolactone) in monocationic and dicationic ionic liquids

Enzymatic polymerization can offer metal-free routes to polymer materials that could be used in biomedical applications. To take advantage of the unique properties of ionic liquids (ILs) for enzyme stability, monocationic ionic liquid (MIL) and dicationic ionic liquid (DIL) were used to promote the ring-opening polymerization of ε-caprolactone (ε-CL) using Candida antarctica lipase B as catalyst. Considering the molecular weight (M _n ) and reaction yield of the resulting polymer (PCL), high density and viscosity of ILs would be good, especially in the case of DIL. With the same total alkyl chain length, the density and viscosity of [C₄(C₆Im)₂][PF₆]₂ were higher than that of [C₁₂MIm][PF₆]. Using a lipase/CL/ILs ratio of 1:20:20 (by wt) for 48 h at 90 °C, the highest M _n and reaction yield of PCL were 26,200 g/mol and 62 % with [C₄(C₆Im)₂][PF₆]₂, while the M _n and reaction yield of PCL obtained in [C₁₂MIm][PF₆] were 11,700 g/mol and 37 %.     

Enzymatic hydrolysis of penicillin in mixed ionic liquids/water two-phase system

In this paper, an integrated process involving the mixed ionic liquids/water two-phase system (MILWS) is proposed to improve the efficiency for enzymatic hydrolysis of penicillin G. First, hydrophilic [C4mim]BF4 (1-butyl-3-methylimidazolium tetrafluoraborate) and NaH2PO4 salt form an ionic liquids aqueous two-phase system (ILATPS), which could extract penicillin from its fermentation broth efficiently. Second, a hydrophobic [C4mim]PF6 (1-butyl-3-methylimidazolium hexafluoraphosphate) is introduced into the ionic liquids-rich phase of ILATPS containing penicillin and converses it into MILWS. Penicillin is hydrolyzed by penicillin acylase in the water phase of MILWS at pH 5. The byproduct phenylacetic acid (PAA) is partitioned into the ionic liquids mixture phase, while the intended product 6-aminopenicillanic acid (6-APA) is precipitated at this pH. In comparison with a similar butyl acetate/water system (BAWS) at pH 4, MILWS exhibits two advantages. (1) The selectivity between PAA and penicillin is greatly optimized at pH 5 by varying the mole ratio of [C4mim]PF6/[C4mim]BF4 in MILWS, whereas in BAWS the unalterable nature of the organic solvent restricts the optimized pH for maximum selectivity between PAA and penicillin at pH 4. (2) The pH for 6-APA precipitation in BAWS is 4, whereas it shifts to pH 5 in MILWS due to the complexation between negatively charged 6-APA and the cationic surface of the ionic liquids micelle. As a result, the removal of the two products from the enzyme sphere at relatively high pH is permitted in MILWS, which is beneficial for enzymatic activity and stability in comparison with the acidic pH 4 environment in BAWS.     

Effect of mobile phase additives on resolution of some nucleic compounds in high performance liquid chromatography

Here we investigate the chromatographic behavior, with reversed-phase high performance liquid chromatography (RP-HPLC) of nucleic compounds (nucleobases, nucleosides, and nucleotides) on a C₁₈ column in several different mobile phase additives, including1-butyl-3-methylimidazolium tetrafuloroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]) ionic liquids, ammonium formate, and potassium phosphate. The effect of the alkyl group length, the imidazolium ring, and the ionic liquid's counterions on retention and resolution of the samples were tested. The results show the potential application of a used buffer system, ion pairing system, and ionic liquid as mobile phase additives in liquid chromatography resolution of nucleic compounds.     

A density functional theory study on the interactions between dibenzothiophene and tetrafluoroborate-based ionic liquids

The interactions between dibenzothiophene (DBT) and N-butyl-N-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), N-butyl-N-methylmorpholinium tetrafluoroborate ([Bmmorpholinium][BF₄]), N-butyl-N-methylpiperdinium tetrafluoroborate ([BMPiper][BF₄]), N-butyl-N-methylpyrrolidinium tetrafluoroborate ([BMPyrro][BF₄]), and N-butylpyridinium tetrafluoroborate ([BPY][BF₄]) were investigated using density functional theory approach. Geometric, electron, and topological properties were analyzed using natural bond orbital, atoms in molecules theory, and noncovalent interaction methods in order to understand intermolecular interactions between DBT and ionic liquids. The result shows that hydrogen bond and van der Waals interactions are widespread in all the ionic liquids-DBT systems. Ion-π interactions between DBT and cation or anion are also observed, while π⁺-π interactions are only found in the [BMIM][BF₄]-DBT and [BPY][BF₄]-DBT systems. The order of interaction energy is [BPY][BF4]-DBT > [BMIM][BF₄]-DBT >> [BMPiper][BF₄]-DBT > [BMPyrro][BF₄]-DBT > [BMmorpholinum][BF₄]-DBT. The energies between DBT and the two ionic liquids containing aromatic cations are significantly higher.     

Thermal Stability and Activity Regain of Horseradish Peroxidase in Aqueous Mixtures of Imidazolium-Based Ionic Liquids

Thermal deactivation kinetics of horseradish peroxidase (HRP) were studied from 45 to 90 °C in phosphate buffer and 5–25% (v,w/v) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄] and 1-butyl-3-methylimidazolium chloride [BMIM][Cl]. HRP activity at 25 °C was not affected by the presence of ionic liquids up to 20% (v,w/v). Increasing the ionic liquids concentration up to 25% (v,w/v) changed the biphasic character of deactivation kinetics to an apparent single first-order step. The presence of 5–10% (v/v) [BMIM][BF₄] significantly improved HRP thermal stability with lower activation energies for the deactivation second phase (83–87 kJ mol⁻¹). After deactivation, enhanced activity regain of the enzyme, up to 70–80% of the initial activity, was found in 25% (v/v) [BMIM][BF₄] and 10% (w/v) [BMIM][Cl] and correlated to prevalence of the deactivation first phase.