Effects of Induced Resistance on Disease Severity/Yield Relations in Mildewed Barley

Field experiments showed that the treatment of winter barley with microbial metabolites produced by a Bacillus subtilis strain led to increased yields in spite of a remaining mildew infection. Disease severity/yield relations obtained on a single tiller basis for either mildew infection at EC 75 or area under disease progress curve (AUDPC) were negatively correlated for untreated plants (R²= 89%, 94%) while this relation did not exist for inducer-treated ones (R²= 10%, 13%). Despite an increasing infection density. yields of main tillers of inducertreated plants were not decreased. On the other hand area under green leaf area curve (AUGLAC) showed a higher correlation with grain yield (R²= 89%) of inducer-treated plants. Possible explanations for the mitigated damaging effect of powdery mildew were expected in carbohydrate metabolism. especially carbohydrate formation and translocation. Assimilation rates of flag leaves of inducer-treated barley with similar infection densities to those of untreated plants were increased over a prolonged period and even exceeded those of non infected ones. In inducer-treated plants the export of ¹⁴CO₂ from flag leaves into ears remained unimpaired by mildew infection and the allocation of assimilates to grains was highest at late stages of grain filling. Obviously plants were stimulated by inducer treatments to compensate for the damaging effect of powdery mildew and to tolerate mildew infection without yield loss.     

Valuable New Leaf or Inflorescence Resistances Ensure Improved Management of White Rust (Albugo candida) in Mustard (Brassica juncea) Crops

Field resistances/susceptibilities against Albugo candida race 2V were determined for 29 Indian Brassica juncea varieties and compared with resistant varieties from China (6) and Australia (7). ‘Basanti’ (AUDPC incidence 46.7; AUDPC severity 29.2) represents the first high‐level resistance to race 2V in Indian varieties. Several others showed lower but still useful levels of resistance, including Narendra Ageti Rai‐4 (AUDPC incidence 150.6; AUDPC severity 66.8) and JM1 (AUDPC incidence 167.1; AUDPC severity 83.7). Highly susceptible Indian varieties had AUDPC incidence values >200 and severity >100. ‘Basanti’ had least stagheads/plant (0.32), while Narendra Ageti Rai‐4 had lowest % plants with stagheads (2.48). In contrast, almost half of Indian varieties had stagheads/plant >1 and % plants with stagheads >4, and >26 for ‘Kranti’. The resistance in ‘Basanti’ paves the way forward towards significantly improved white rust management in mustard in India. JM06011, JM06021, JR049 from Australia and CJB‐003 from China had zero leaf incidence. There were significant (P < 0.001) relationships between disease incidence with severity (R² 0.92), stagheads/plant (R² 0.69) and also % plants with stagheads (R² 0.60); between disease severity with stagheads/plant (R² 0.68) and also % plants with stagheads (R² 0.69); and between stagheads/plant with % plants with stagheads (R² 0.59).     

Two stable QTL involved in adult plant resistance to powdery mildew in the winter wheat line RE714 are expressed at different times along the growing season

Powdery mildew (Blumeria graminis f. sp. tritici) is one of the major diseases of wheat (Triticum aestivum). Adult plant resistance (APR) to powdery mildew is considered more durable than resistance conferred by major race-specific resistance genes. The objective of the present study was a better understanding of the genetic basis of APR in RE714 by means of QTL analysis of several resistance scores along the growing season. A population of 160 recombinant inbred lines obtained from the cross between RE714 and Hardi (susceptible) was assessed for APR under natural infection conditions during 3 years and a genetic map with whole genome coverage was developed with microsatellite and AFLP markers in this population. Two major QTL on chromosomes 5D and 6A were detected each year, and 6 minor QTL were detected only in 1 or 2 years. The QTL on chromosome 5D was detected during all the growing season each year and its R ² value varied between 8.5 and 56.3%, whereas the QTL on chromosome 6A was detected at 1–4 scoring dates in the 3 years, and its R ² value varied between 6.1 and 20.5%. The two QTL explained between 24.4 and 52.1% of the phenotypic variance for AUDPC, depending on the year. The models including QTL and cofactors in the composite interval mapping explained between 29 and 72% of the variance. The molecular markers linked to the two major QTL could be used in marker-assisted selection for adult plant resistance to powdery mildew. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The mildew resistance of Hordeum bulbosum and its transference into H. vulgare genotypes

Mildew from susceptible genotypes (SI and S2) of Hordeum bulbosum was found to be avirulent on all H. vulgare genotypes tested, including such cultivars as Proctor with no known genes for resistance to mildew. The H. bulbosum genotype SI (2n =14) proved resistant to all isolates of mildew from H. vulgare. The mildew isolates used for these tests possessed most of the common virulence factors which attack the current ‘vulgare’ cultivars in Western Europe. Some H. bulbosum genotypes were resistant to the ‘bulbosum’ mildew. Attempts at combining resistance from both species are presented and discussed.     

Field resistance of spring barley cultivars to powdery mildew in Lithuania

During vegetative period 2004–2005 powdery mildew (Erysiphe graminis DC. f. sp. hordei Em. Marchal) field resistance of spring barley cultivars was investigated at the Lithuanian Institute of Agriculture. The spring barley genotypes tested were Lithuania-registered cultivars, cultivars from genetic resources collection, and the new cultivars used for initial breeding. In total, 23 resistance genes were present in the 84 cultivars studied. Among mono-genes only mlo and 1-B-53 showed very high resistance. Slight powdery mildew necroses (up to 3 scores) formed on cultivars possessing these genes. The maximal powdery mildew (PM) severity reached a score of 8.5 and the area under disease progress curve (AUDPC) a value of 1216.8. The cultivars ‘Primus’, ‘Astoria’, ‘Power’, ‘Harrington’ and ‘Scarlett’ were the most resistant among the non mlo cultivars. Severity of PM on ‘Primus’ reached a score of 3.5 (3.0 of PM necrosis) in average, the other cultivars were diseased from 4.5 (3.0) to 5.0 (2.0). The AUDPC values for these cultivars except ‘Scarlett’ were the lowest (85.0–145.3) among the other cultivars. The highest contrast in development of the other leaf diseases was between highly resistant and susceptible to PM cultivar groups. The fast development of PM depressed development of the other diseases 4.7 times.     

Genetic variability in mulberry against Myrothecium leaf spot (Myrothecium roridum) and identification of resistance genotypes

Disease response of 30 mulberry genotypes to Myrothecium leaf spot (Myrothecium roridum) was studied under inoculated condition. It was observed that 10 genotypes were resistant, 16 genotypes moderately resistant and 4 genotypes moderately susceptible to the disease. Area under disease progress curve (AUDPC) and apparent infection rate was found significantly lower in the resistant genotypes. Correlation study revealed that percent disease index (PDI) has significant positive correlation with AUDPC and apparent infection rate. Genetic analysis of disease-resistant traits (PDI and mean AUDPC) revealed that phenotypic coefficient of variation (PCV) was higher than genotypic coefficient of variation (GCV) for both PDI and AUDPC, and GCV/PCV ratio was also found high which indicated that disease-resistant traits to Myrothecium leaf spot were not much influenced by environment. High heritability coupled with high genetic advance indicated that the disease-resistant traits are due to additive gene effect thereby indicating the amenability of disease-resistant in the selection process. Hence disease-resistant mulberry genotypes viz. C-763, S-34, Jodhpur, Cyprus, Australian and Hungarian may be used as source of resistance to Myrothecium leaf spot for future breeding programme. Besides, high yielding genotypes viz. Tr-10, C-763 and S-34 may be recommended for commercial exploitation     

Quantitative Differences in Powdery Mildew Resistance Among Spring Barley Cultivars

Quantitative powdery mildew resistance in compatible host-pathogen-combinations was measured by the number of pastules/cm² leaf area. Spring barley cultivar ‘Proctor’ was significantly less infected than ‘Golden Promise”. Using these two cultivars (having no effective major resistance gene) as controls, MO- and AR-resistant cultivars were inoculated with virulent mildew isolates. ‘Mona”, ‘Grit’ and ‘Nudinka’ had a higher or, at least, the same level of quantitative resistance as ‘Proctor”. None of the remaining cultivars showed the high susceptibility expressed by ‘Golden Promise”. Ranking of host genotypes was nearly constant while that of mildew isolates varied considerably. Only a small portion of the observed variance was due to interaction between host cultivars and pathogen isolates. ‘Triesdorfer Diva’ gave a resistant infection type after inoculation with different AR-virulent isolates, indicating that this cultivar has major resistance other than that conditioned by gene Ml-a12.     

Efficacy of Exserohilum longirostratum on barnyard grass (Echinochloa crus-galli spp. crusgalli) under field conditions

An isolate of Exserohilum longirostratum obtained from Rottboelia cochinchinensis in Malaysia was highly pathogenic to barnyardgrass (Echinocloa crus-galli,) a serious weed in rice fields in Malaysia. In glasshouse trials, high levels of barnyardgrass control were achieved when E. longirostratum was applied as a conidial concentration at 10⁵ conidia/mL. This conidial concentration may not be sufficient for field use; therefore, a mini plot trial was carried out to assess the bioherbicidal potential of the fungus and the efficacy of different inoculum types under field conditions. Excellent barnyard grass disease as indicated by Area Under Disease Progress Curve (AUDPC) was achieved with mycelium (AUDPC = 583.8 unit²); mycelium + pretichlaclor (AUDPC = 610.4 unit²) and conidia alone (AUDPC = 468.3 unit²) compared to conidia + pretichlaclor (AUDPC = 395.8 unit²). Although conidia caused lower disease severity on barnyard grass compared to mycelium, this inoculum equally reduced the competition from barnyard grass as indicated by lower mean dry weight and fewer barnyard grass tiller numbers. Positive correlations between AUDPC of rice and its tiller number and AUDPC of rice and its dry weight were recorded while negative correlations were observed for the AUDPC of barnyard grass and its tiller number and AUDPC of barnyard grass and its dry weight. These findings confirmed that E. longirostratum applied either in the form of conidia or mycelium was effective against barnyard grass under field conditions.     

Arabidopsis mlo3 mutant plants exhibit spontaneous callose deposition and signs of early leaf senescence

Key message

Arabidopsis thaliana mlo3 mutant plants are not affected in pathogen infection phenotypes but—reminiscent of mlo2 mutant plants—exhibit spontaneous callose deposition and signs of early leaf senescence.

Abstract

The family of Mildew resistance Locus O (MLO) proteins is best known for its profound effect on the outcome of powdery mildew infections: when the appropriate MLO protein is absent, the plant is fully resistant to otherwise virulent powdery mildew fungi. However, most members of the MLO protein family remain functionally unexplored. Here, we investigate Arabidopsis thaliana MLO3, the closest relative of AtMLO2, AtMLO6 and AtMLO12, which are the Arabidopsis MLO genes implicated in the powdery mildew interaction. The co-expression network of AtMLO3 suggests association of the gene with plant defense-related processes such as salicylic acid homeostasis. Our extensive analysis shows that mlo3 mutants are unaffected regarding their infection phenotype upon challenge with the powdery mildew fungi Golovinomyces orontii and Erysiphe pisi, the oomycete Hyaloperonospora arabidopsidis, and the bacterial pathogen Pseudomonas syringae (the latter both in terms of basal and systemic acquired resistance), indicating that the protein does not play a major role in the response to any of these pathogens. However, mlo3 genotypes display spontaneous callose deposition as well as signs of early senescence in 6- or 7-week-old rosette leaves in the absence of any pathogen challenge, a phenotype that is reminiscent of mlo2 mutant plants. We hypothesize that de-regulated callose deposition in mlo3 genotypes might be the result of a subtle transient aberration of salicylic acid-jasmonic acid homeostasis during development.

     

Area under disease progress curve and apparent infection rate of Alternaria blight disease of Indian mustard (Brassica juncea) at different plant age

Plant age has a major influence on the incidence of Alternaria blight disease in Indian mustard crops. Disease progression was monitored twice a week on the two chosen Indian mustard cultivars viz., Varuna and Rohini throughout the season. Severity of blight caused by Alternaria brassicae and Alternaria brassicicola decreased with delay in sowing. Calculation for A-value (Area under disease progress curve – AUDPC) and r-value (apparent infection rate) in crops sown on different dates could identify the speed of progress in the disease on leaves and pods, as the crop does not posses resistance to the pathogen till date. Thus, the probable dates of sowing enabling slow disease progress or the weather conditions coinciding with the different crop phenological stages demarcated the advantageous dates of sowing from the disadvantageous ones. However, cultivar Varuna is more susceptible as compared to the other cultivar Rohini, as apparent infection rate both on leaves and pods was higher in former. Highest per cent disease severity (PDS) for season highly correlated with date of sowing, i.e. delayed date of sowing increased PDS.     

Optimizing Controlled Environment Assessment of Levels of Resistance to Yam Anthracnose Disease Using Tissue Culture-derived Whole Plants

Studies were conducted to determine the timing and frequency of disease assessment required to effectively identify levels of resistance to yam anthracnose using tissue culture‐derived whole plant inoculation assay. The effects of inoculation methods (paint brush and spray), and disease scoring methods [individual leaf area (ILA) and whole plant area (WPA)] were also assessed. Spray inoculation resulted in rapid infection and higher variations among yam genotypes, leading to earlier discrimination of genotypes than with the paintbrush method. Both the ILA and WPA scoring methods showed variation among yam genotypes, and association between the two methods gave a high positive correlation (r > 0.90). However, the WPA was faster and had the advantage of detecting differences in reactions of yam genotypes to less aggressive pathogen isolates to which the ILA method showed no variation. A single disease evaluation at 7 days after inoculation was as good as the area under the disease progress curve (AUDPC) and the disease progress rate (R_d) derived from multiple evaluations. However, a significant time–genotype interaction, suggests a need for more than a single assessment for effective comparison of genotypes. AUDPC derived from two assessments (5 and 7 DAI) was better than AUDPC from three assessments (5, 7 and 9 DAI) in separating genotypes reactions to a less aggressive pathogen isolate. This study showed that the use of spray inoculation method, the WPA scoring method, and AUDPC derived from two assessments (5 and 7 DAI) provided best conditions for evaluating yam genotypes for levels of anthracnose resistance with the tissue culture‐derived whole plant assay.     

Identification and mapping of two powdery mildew resistance genes in <Emphasis Type="Italic">Triticum boeoticum</Emphasis> L.

Powdery mildew (PM) caused by Blumeria graminis f. sp. tritici (Bgt), is one of the important foliar diseases of wheat that can cause serious yield losses. Breeding for cultivars with diverse resources of resistance is the most promising approach for combating this disease. The diploid A genome progenitor species of wheat are an important resource for new variability for disease resistance genes. An accession of Triticum boeoticum (A^bA^b) showed resistance against a number of Bgt isolates, when tested using detached leaf segments. Inheritance studies in a recombinant inbred line population (RIL), developed from crosses of PM resistant T. boeoticum acc. pau5088 with a PM susceptible T. monococcum acc. pau14087, indicated the presence of two powdery mildew resistance genes in T. boeoticum acc. pau5088. Analysis of powdery mildew infection and molecular marker data of the RIL population revealed that both powdery mildew resistance genes are located on the long arm of chromosome 7A. Mapping was conducted using an integrated linkage map of 7A consisting of SSR, RFLP, STS, and DArT markers. These powdery mildew resistance genes are tentatively designated as PmTb7A.1 and PmTb7A.2. The PmTb7A.2 is closely linked to STS markers MAG2185 and MAG1759 derived from RFLP probes which are linked to powdery mildew resistance gene Pm1. This indicated that PmTb7A.2 might be allelic to Pm1. The PmTb7A.1, flanked by a DArT marker wPt4553 and an SSR marker Xcfa2019 in a 4.3 cM interval, maps proximal to PmT7A.2. PmTb7A.1 is putatively a new powdery mildew resistance gene. The powdery mildew resistance genes from T. boeoticum are currently being transferred to cultivated wheat background through marker-assisted backcrossing, using T. durum as bridging species.     

Quantitative trait loci mapping of adult-plant resistance to powdery mildew in triticale

Powdery mildew (PM) is a common disease caused by Blumeria graminis, which affects cereals and has recently adapted to triticale. Adult-plant resistance (APR) genes provide durable protection of crops from the disease. Quantitative trait loci corresponding to the APR effects were mapped in an F₂ population of “Lamberto” (susceptible) × “Moderto” (resistant). A genetic map of winter triticale was constructed based on the segregation of 863 DArT, 38 microsatellite and 10 resistance gene analogue markers. Composite interval mapping (CIM) was applied to identify three QTLs for maximum disease severity (MDS) and two for the area under disease progress curve (AUDPC) conferring resistance to the powdery mildew on chromosomes: 6A, 7A, 1B and 4R. The 39% variation in AUDPC was explained by the main QTL localised on chromosome 4R. Genes coding TRIUR3 proteins, serine/threonine protein kinase and cell wall associated kinases were localised in silico within the QTL and alternative DNA markers were proposed for flexible use in laboratories of diversified throughput.     

Elevated atmospheric carbon dioxide and ozone alter soybean diseases at SoyFACE

Human driven changes in the Earth's atmospheric composition are likely to alter plant disease in the future. We evaluated the effects of elevated carbon dioxide (CO₂) and ozone (O₃) on three economically important soybean diseases (downy mildew, Septoria brown spot and sudden death syndrome‐SDS) under natural field conditions at the soybean free air concentration enrichment (SoyFACE) facility. Disease incidence and/or severity were quantified from 2005 to 2007 using visual surveys and digital image analysis, and changes were related to microclimatic variability and to structural and chemical changes in soybean host plants. Changes in atmospheric composition altered disease expression, but responses of the three pathosystems varied considerably. Elevated CO₂ alone or in combination with O₃ significantly reduced downy mildew disease severity (measured as area under the disease progress curve‐AUDPC) by 39–66% across the 3 years of the study. In contrast, elevated CO₂ alone or in combination with O₃ significantly increased brown spot severity in all 3 years, but the increase was small in magnitude. When brown spot severity was assessed in relation to differences in canopy height induced by the atmospheric treatments, disease severity increased under combined elevated CO₂ and O₃ treatment in only one of the 3 years. The atmospheric treatments had no effect on the incidence of SDS or brown spot throughout the study. Higher precipitation during the 2006 growing season was associated with increased AUDPC severity across all treatments by 2.7 and 1.4 times for downy mildew and brown spot, respectively, compared with drought conditions in 2005. In the 2 years with similar precipitation, the higher daily temperatures in the late spring of 2007 were associated with increased severity of downy mildew and brown spot. Elevated CO₂ and O₃ induced changes in the soybean canopy density and leaf age likely contributed to the disease expression modifications.     

Efficacy of Acibenzolar‐S‐Methyl and β‐Aminobutyric Acid for Control of Downy Mildew in Greenhouse Grown Basil and Peroxidase Activity in Response to Treatment with these Compounds

Downy mildew, caused by the oomycete pathogen Peronospora belbahrii, is a devastating foliar disease of basil in the United States and worldwide. Currently there are very few chemistries or organic choices registered to control this disease. In this study, two systemic acquired resistance (SAR) inducers, acibenzolar‐S‐methyl (ASM) and β‐aminobutyric acid (BABA), were evaluated for their in vitro effects on the pathogen, for their potential to control basil downy mildew in greenhouses, and for changes in peroxidase activity in basil plants treated with these two SAR inducers. No significant inhibition of sporangial germination was detected in water agar amended with ASM at concentrations lower than 100 mg/l or with BABA at concentrations lower than 500 mg/l. Efficacy of ASM and BABA in greenhouses varied depending on the rate, method and timing of application. The area under the disease progress curve (AUDPC) of disease severity was significantly reduced compared to the non‐treated control when ASM was sprayed (in all experiments) or drenched (in one out of two experiments) pre‐, or pre‐ + post‐inoculation at rates of 25–400 mg/l. Three weekly post‐inoculation sprays of ASM at the rate of 50 mg/l reduced AUDPC by 93.0 and 47.2% when started 3 and 7 days after inoculation (DAI), respectively. The AUDPC of disease severity was also significantly reduced when BABA was sprayed pre‐ + post‐inoculation at rates of 125–500 mg/l. According to the prediction using a log‐logistic function, 50% maximum disease protection was achieved at a concentration of 27.5 mg/l of ASM. Basil plants treated with these two SAR inducers and challenged with the pathogen showed significantly higher peroxidase activity than the non‐treated control at 8 DAI. Temporally, the highest activity of peroxidase was detected at 8 DAI, decreased at 15 DAI and waned further at 23 DAI.     

Phenolic acid content – a criterion for selection of resistant apple cultivars against Podosphaera leucotricha (Ell. and Ev.) Salmon

Development of powdery mildew (Podosphaera leucotricha) on five popular cultivars of apple, viz., Scarlet Gala, Golden spur, Mollies Delicious, Red Fuzi and Red Chief was studied to determine incidence–severity relationship. The disease was confined primarily to the vegetative terminal shoots early in the season which also traversed later onto other leaves. Several biochemical changes occur in the trees due to fungal/microbial infection. We studied the qualitative/quantitative changes in phenolic acids in apple-powdery mildew pathosystems. Scarlet Gala and Red Chief are very rich in phenolic acids, and had shown resistances to the pathogen but those with low amount of phenolic acids, viz., Golden spur, Mollies Delicious, and Red Fuzi, were highly susceptible. Thus, the quantity of phenolic acids (secondary metabolites) has been taken as a biochemical parameter in screening apple cultivars for resistance/susceptibility against powdery mildew of apple.     

Effects of Mildew and Nitrogen on Grain Yield of Barley Artifically Infected in the Field

Powdery mildew was artificially introduced into field plotsof barley given two amounts of nitrogen fertilizer. In Tyraand Triumph, grain dry matter and nitrogen yield of healthyplots increased in response to nitrogen fertilizer. In mildewedplots increases in response to nitrogen did not occur in Triumph,despite low levels of mildew infection. Mildew reduced grainyield and nitrogen content at both levels of nitrogen in bothvarieties. Hordewm vulgare L., barley, Erysiphe graminis, powdery mildew, nitrogen fertilizer, grain yield     

Evaluation of Water Yam (Dioscorea alata L.) Germplasm for Reaction to Yam Anthracnose and Virus Diseases and their Effect on Yield

Use of genetic resistance is the most practical and economic way to manage major diseases of yams. In a search for sources of resistance, 40 water yam (Dioscorea alata L.) accessions from Benin, Ghana, Nigeria and Puerto Rico were screened under natural disease infection conditions in Ibadan, Nigeria. The accessions were evaluated at 1, 3 and 6 months after planting (MAP) for severity of yam anthracnose and viral diseases. The effect of the pathogens on yield was also evaluated at harvest 9 MAP. There were significant differences (P < 0.001) between accessions for severities of anthracnose and viral diseases. Eight (20%) of them had lower anthracnose area under disease progress curves (AUDPC) values than the resistant check while 10 (25%) had AUDPC values below the trial mean. There were significant variations (P < 0.001) in yield components among the accessions. There was significant negative correlation of anthracnose severity with fresh tuber yield (r = −0.51) and with number of tubers per plot (r = −0.40). Similarly, significant negative correlations were observed of virus disease severity with fresh tuber yield (r = −0.78) and number of tubers per plot (r = −0.65). Linear regression models also showed that the fresh yield had significant negative relationships with anthracnose (R² = 0.26) and viral (R² = 0.62) diseases. The accessions identified as resistant constitute a valuable resource for breeding of resistant germplasm.     

mlo‐based powdery mildew resistance in hexaploid bread wheat generated by a non‐transgenic TILLING approach

Wheat is one of the most widely grown cereal crops in the world and is an important food grain source for humans. However, wheat yields can be reduced by many abiotic and biotic stress factors, including powdery mildew disease caused by Blumeria graminis f.sp. tritici (Bgt). Generating resistant varieties is thus a major effort in plant breeding. Here, we took advantage of the non‐transgenic Targeting Induced Lesions IN Genomes (TILLING) technology to select partial loss‐of‐function alleles of TaMlo, the orthologue of the barley Mlo (Mildew resistance locus o) gene. Natural and induced loss‐of‐function alleles (mlo) of barley Mlo are known to confer durable broad‐spectrum powdery mildew resistance, typically at the expense of pleiotropic phenotypes such as premature leaf senescence. We identified 16 missense mutations in the three wheat TaMlo homoeologues, TaMlo‐A1, TaMlo‐B1 and TaMlo‐D1 that each lead to single amino acid exchanges. Using transient gene expression assays in barley single cells, we functionally analysed the different missense mutants and identified the most promising candidates affecting powdery mildew susceptibility. By stacking of selected mutant alleles we generated four independent lines with non‐conservative mutations in each of the three TaMlo homoeologues. Homozygous triple mutant lines and surprisingly also some of the homozygous double mutant lines showed enhanced, yet incomplete, Bgt resistance without the occurrence of discernible pleiotropic phenotypes. These lines thus represent an important step towards the production of commercial non‐transgenic, powdery mildew‐resistant bread wheat varieties.