Characterization of replication and conjugation of Streptomyces circular plasmids pFP1 and pFP11 and their ability to propagate in linear mode with artificially attached telomeres

Many Streptomyces species harbor circular plasmids (8 to 31 kb) as well as linear plasmids (12 to 1,700 kb). We report the characterization of two newly detected circular plasmids, pFP11 (35,139 bp) and pFP1 (39,360 bp). As on linear plasmids, their replication loci comprise repA genes and adjacent iterons, to which RepA proteins bind specifically in vitro. Plasmids containing the minimal iterons plus the repA locus of pFP11 were inherited extremely unstably; par and additional loci were required for stable inheritance. Surprisingly, plasmids containing replication loci from pFP11 or Streptomyces circular plasmid SCP2 but not from pFP1, SLP1, or pIJ101 propagated in a stable linear mode when the telomeres of a linear plasmid were attached. These results indicate bidirectional replication for pFP11 and SCP2. Both pFP11 and pFP1 contain, for plasmid transfer, a major functional traB gene (encoding a DNA translocase typical for Streptomyces plasmids) as well as, surprisingly, a putative traA gene (encoding a DNA nickase, characteristic of single-stranded DNA transfer of gram-negative plasmids), but this did not appear to be functional, at least in isolation.     

The PagN protein mediates invasion via interaction with proteoglycan

Streptomyces linear plasmids start replication at centrally located loci, usually consisting of iterons and adjacent rep genes. Here, we identified four new replication loci from Streptomyces linear plasmids. A discontinuous locus, consisting of two genes and iterons separated by two nonessential genes, was required for replication of pRL2 in both linear and circular modes. A temperature-sensitive plasmid, pRL4, contained a replication locus, a noncoding sequence and a SAP1.35 -like gene. A telomere-adjacent locus, another noncoding sequence and SAP1.1 -like gene, was identified for replication of the large plasmid pFRL2. The replication locus of pSHK1 consisted of SCP1- rep -like genes and iterons. These results indicate an unexpected variety of components, positions and combinations of replication loci among Streptomyces linear plasmids.     

The conjugative plasmid SLP2 of Streptomyces lividans is a 50 kb linear molecule

The SLP2 plasmid had previously been demonstrated genetically to exist In Streptomyces lividans by its ability to promote conjugation and to elicit‘pocks’on recipient (SLP2^?) cultures, but it had not been physically detected. Using pulsed-field gel electrophoresis, a 50kb linear DNA was isolated from SLP2⁺ but not SLP2^? strains of S. lividans, and from Streptomyces coelicolor and Streptomyces parvulus strains to which SLP2 had been transferred by conjugation or transformation. We conclude that this linear DNA is SLP2. The terminal fragments of SLP2 were cloned. The determined sequences revealed a 44 bp imperfect terminal inverted repeat. The terminal 12 bp sequence of SLP2 was identical to those of two other Streptomyces linear plasmids, pSLA2 and pSCL, and similar to the terminal sequences of another Streptomyces linear plasmid, SCP1. The termini of SLP2 DNA were resistant to digestion by λ exonuclease and ExoIII. A truncated (probably crippled) copy of Tn4811 is present on the plasmid. While the SLP2 plasmid exists as a tree form in the host, a 15.7 kb sequence corresponding to the segment of SLP2 from Tn4811 to the right terminus is also present (at a copy number similar to the free form) elsewhere in the genome of S. lividans. Furthermore, SLP2 is partially homologous to a newly discovered 650 kb linear plasmid in S. parvulus.     

Diversity of telomere palindromic sequences and replication genes among Streptomyces linear plasmids

Streptomyces sp. linear plasmids and linear chromosomes usually contain conserved terminal palindromic sequences bound by the conserved telomeric proteins Tap and Tp, encoded by the tap and tpg genes, respectively, as well as plasmid loci required for DNA replication in circular mode when the telomeres are deleted. These consist of iterons and an adjacent rep gene. By using PCR, we found that 8 of 17 newly detected linear plasmids in Streptomyces strains lack typical telomeric tap and tpg sequences. Instead, two novel telomeres in plasmids pRL1 and pRL2 from the eight strains and one conserved telomere in pFRL1 from the other strains were identified, while multiple short palindromes were also found in the plasmids. The complete nucleotide sequence of pRL2 revealed a gene encoding a protein containing two domains, resembling Tap of Streptomyces and a helicase of Thiobacillus, and an adjacent gene encoding a protein similar to Tpg of Streptomyces and a portion of the telomere terminal protein pTP of adenoviruses. No typical iterons-rep loci were found in the three plasmids. These results indicate an unexpected diversity of telomere palindromic sequences and replication genes among Streptomyces linear plasmids.     

Prediction and functional analysis of the replication origin of the linear plasmid pSCL2 in Streptomyces clavuligerus

pSCL2 (120 kb), one of the linear plasmids found in Streptomyces clavuligerus NRRL3585, was isolated and partially sequenced. Computational analysis of the central region of pSCL2 revealed the presence of two open reading frames that appear to encode proteins highly homologous to RepL1 and RepL2, replication proteins from pSLA2-L, the large linear plasmid in Streptomyces rochei. The S. clavuligerus open reading frames were designated repC1 and repC2, encoding the proteins RepC1 (150 amino acids) and RepC2 (102 amino acids), respectively. The RepC and RepL proteins have identical translation features and very similar predicted secondary and tertiary structures. Functional analysis confirmed that RepC1 is essential for replication initiation of pSCL2, whereas RepC2 is dispensable but may play a role in copy number control. The RepC and RepL proteins do not show similarity to any other bacterial plasmid replication proteins. Three regions of DNA sequence, Box 1 (1050-850 bp), Box 2 (723-606 bp), and Box 3 (224-168 bp), located upstream of repC1, were also shown to be essential or very important for replication of pSCL2.     

A linear plasmid temperature-sensitive for replication in Streptomyces hygroscopicus 10-22

Streptomyces hygroscopicus 10-22 harbors a conjugative, autonomously replicating linear plasmid pHZ6 of ca. 70 kb, which shows no obvious homology with chromosomal DNA and is temperature-sensitive for replication, being stable in the host at 28 degrees C but easily lost at 37 degrees C. On a lawn of the wild-type S. hygroscopicus 10-22 cured of pHZ6, pHZ6 elicit pocks. Temperature sensitivity seemed to be a unique property for pHZ6 among six linear plasmids tested, including the well-known linear plasmids SLP2 in Streptomyces lividans 1326 and SCP1 in Streptomyces coelicolor A3(2). The distinct identity of pHZ6 from previously identified pHZ1-pHZ5 was demonstrated by the profile of relevant plasmids in six well-defined strains originated from S. hygroscopicus 10-22.     

The linear plasmid SCP1 of Streptomyces coelicolor A3(2) possesses a centrally located replication origin and shows significant homology to the transposon Tn4811.

The linear plasmid SCP1 of Streptomyces coelicolor A3(2) is one of the genetically more studied linear streptomycete replicons. Although the genetics of SCP1 and its interaction with the host chromosome have been analyzed for nearly three decades no information exists on its replication. With the help of an ordered cosmid contig for the complete 360-kb element, we have localized a 5439-bp fragment from the central region that confers autonomous replication in Streptomyces lividans. The minimal origin contains two overlapping ORFs which are separated from an AT-rich region which might correspond to the replication start point. ORF1 revealed intensive similarity to a class of DNA-primase/helicases of actinophages and archael plasmids. In addition, we have identified a region in both terminal inverted repeats of SCP1 that shows significant homology to the transposable element Tn4811 located near the ends of the S. lividans 66 chromosome.     

Linear plasmid SLP2 of Streptomyces lividans is a composite replicon

SLP2 is a 50 kb linear plasmid in Streptomyces lividans that contains short (44 bp) terminal inverted repeats and covalently bound terminal proteins. The nucleotide sequence of SLP2 was determined. The rightmost 15.4 kb sequence is identical to that of the host chromosome, including the Tn4811 sequence at the border, which is interrupted by an insertion sequence (IS) element in SLP2. Examination of the flanking target sequences of Tn4811 suggests a previous recombinational event there. The 43 putative protein coding sequences contained many involved in replication (including two terminal protein homologues), partitioning, conjugal transfer and intramycelial spread. The terminally located helicase-like gene ttrA was necessary for conjugal transfer. The two telomeres diverge significantly in primary sequence, while preserving similar secondary structures. Mini-linear plasmids containing these telomeres replicated in S. lividans using the chromosomally encoded terminal protein. In addition, two pseudotelomere sequences are present near the left telomere. The G+C content and GC or AT skew profiles exhibit complex distributions. These, plus the inferred recombination at the right arm, indicate that SLP2 has evolved through rounds of exchanges involving at least three replicons.     

The telomere system of the Streptomyces linear plasmid SCP1 represents a novel class

Linear plasmids and chromosomes of Streptomyces carry terminal proteins (TPs) covalently attached to the 5' ends of the DNA. Most known telomeres are conserved in primary sequence and in the potential secondary structures formed during replication. The TP that caps these telomeres is also highly conserved and its coding gene, tpg, is present in all Streptomyces chromosomes and some linear plasmids. Linear plasmid SCP1 contains atypical telomere sequences and no tpg homologue, and can replicate in the absence of tpg, suggesting that it carries a novel TP gene. To isolate the TP on the SCP1 telomeres, we constructed a multicopy mini-SCP1 plasmid. The TP capping the plasmid was isolated and subjected to tryptic digestion and mass spectrometric analysis, and the results indicated that the TP was encoded by an open reading frame (ORF), SCP1.127 (tpc), on SCP1. Of the two ORFs upstream of tpc, SCP1.125 (tac) but not SCP1.126 was essential for replication of mini-SCP1. The Tac-Tpc system of SCP1 represents a convergently evolved novel telomere-capping system of Streptomyces linear replicons.     

A linear DNA plasmid from Streptomyces rochei with an inverted terminal repetition of 614 base pairs.

The terminal structure of a linear plasmid pSLA2 , which was isolated from Streptomyces rochei , was analysed. The 5' ends of pSLA2 DNA were blocked by the association of a protein probably covalently bonded with the DNA. This block is removed by alkali treatment and blunt ends with 5'-phosphate and 3'-hydroxy termini were released. The two terminal fragments of pSLA2 were cloned and the nucleotide sequence was determined. An inverted terminal repetition of 614 bp was found along with the presence of further interrupted homologous sequences beyond this area up to 800 bp. These are the first inverted terminal repeat sequences found in microbial linear plasmids.     

拟诺卡氏菌线型质粒pNPL1的测序和分析

【目的】检测和分析稀有放线菌中新的线型质粒。【方法】从植物内生菌中分离链霉菌之外的放线菌菌株,检测、测序和分析线型质粒。【结果】从中草药植物紫花前胡的叶片中分离到一株内生放线菌25L-1-1c,经过16S rRNA基因序列比对属于拟诺卡氏菌。从该菌株中检测到一个约25 kb的线型质粒pNPL1。克隆和测序了pNPL1新的端粒,含有多个小的回文序列。测序获得全长为24 621 bp的线型质粒pNPL1,预测编码22个基因,其中2个基因与链霉菌质粒的端粒复制基因同源,1个基因与链霉菌质粒主要的接合转移基因相似,其余19个基因为未知功能。携带pNPL1端粒复制基因的质粒不能转化变铅青链霉菌,暗示需要发展拟诺卡氏菌的遗传操作系统。【结论】这是首次在拟诺卡氏菌中发现和描述线型质粒。     

Transformation and transfection of anthracycline-producing streptomycetes.

Streptomyces peucetius and Streptomyces strain C5, producers or anthracycline antibiotics, were converted to protoplasts from vegetatively growing mycelia. Conditions are described for maximal protoplast formation (greater than 99%) and for regeneration frequencies of up to 13%. Streptomycete plasmids pIJ61, pIJ702, and pIJ922, from the replicons SLP1, pIJ101, and SCP2, respectively, were isolated from Streptomyces lividans 66 and successfully introduced into S. peucetius and Streptomyces strain C5 by polyethylene glycol-mediated protoplast transformation. Frequencies of up to 10(6) transformations X microgram of plasmid DNA-1 were achieved by these procedures. Analyses showed that the two anthracycline-producing strains can stably harbor the plasmids without deletion of plasmid sequences or loss of the plasmids for several transfers through selective media. Fragments of DNA from S. peucetius ligated into pIJ702 and introduced into Streptomyces strain C5 were stable after several transfers through selective media. Both anthracycline producers also were sensitive to infection and transfection by actinophages KC401 and KC515, clear plaque derivatives of bacteriophage phi C31. Optimal conditions were determined for the transfection of S. peucetius and Streptomyces strain C5 protoplasts with phi C31 KC401 and KC515 DNA with liposome-assisted, polyethylene glycol-mediated protoplast transfection.     

The minimal replicon of a Streptomycete plasmid produces an ultrahigh level of plasmid DNA

A functional map of Streptomyces coelicolor plasmid SCP2* was deduced from derivatives constructed by in vitro deletions. Functions were analyzed on bifunctional shuttle plasmids that contained pBR322 for selection and replication in Escherichia coli and fragments of SCP2* for replication in Streptomyces griseofuscus C581 and strains of Streptomyces lividans. The aph gene for neomycin resistance from Streptomyces fradiae and the tsr gene for thiostrepton resistance from Streptomyces azureus were incorporated as selectable antibiotic resistance markers in streptomycetes. An 11.8-kb sequence bounded by EcoRI and KpnI restriction sites contains the information for self-transfer and normal replication of the plasmid. A 5.9-kb EcoRI-SalI fragment contains all of the information for normal replication. Partial digestion generated a 2.2-kb Sau3A fragment that is sufficient for replication but it produces ten times higher plasmid copy number than the basic replicon. pHJL400 and PHJL401 are useful shuttle vectors containing the moderate-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19. A 1.4-kb BclI-Sau3A fragment with an additional internal BclI site contains the minimal replicon but it produces 1000 times higher plasmid copy number than the basic replicon. pHJL302 is a useful shuttle vector containing the ultrahigh-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19.     

Replication at the telomeres of the Streptomyces linear plasmid pSLA2

The Streptomyces linear plasmid pSLA2 initiates DNA replication bidirectionally towards its telomeres from a site located near the centre of the molecule; at the telomeres, the recessed ends of lagging strands are filled in by non-displacing DNA synthesis. Here, we report experiments that test three proposed mechanisms for lagging-strand fill-in. We present data inconsistent with recombinational or terminal hairpin models for the formation of full-length duplex pSLA2 DNA. Instead, we find that deletions in short, distantly separated homologous palindromes in the leading-strand 3' overhang prevent propagation of linear pSLA2 DNA, implicating a mechanism of palindrome-mediated leading-strand fold-back in telomere replication. We further show that circularized pSLA2 DNA molecules are opened in vivo precisely at the terminal nucleotides of telomeres, generating functional linear replicons containing native telomeres covalently bound to a protein at their 5' DNA termini. Together, our results support a model in which pairing of multiple widely separated pSLA2 palindromes anchors the 3' end of the leading-strand overhang to a site near the overhang's base — providing a recognition site for terminal-protein-primed DNA synthesis and subsequent endonucleolytic processing. Thus, the replication of Streptomyces plasmid telomeres may have features in common with the mechanism proposed for telomere replication in autonomous parvoviruses.     

高温链霉菌质粒pTSC2的测序分析和滚环复制方式的鉴定

从猪粪堆肥中分离到一株编号为X3-3的可以在50℃高温生长的链霉菌菌株,该菌株含有一个约7kb的环型质粒pTSC2。【目的】克隆、测序和分析pTSC2,以及鉴定质粒的复制方式。【方法】利用分段克隆和引物延伸获得pTSC2的全序列,利用多序列比对寻找复制元件rep、dso和sso,利用中性转移和Southern杂交检测复制中间体。【结果】克隆和测序获得了全长为7516bp的pTSC2序列,预测编码8种蛋白,其中4种蛋白与链霉菌滚环复制的质粒pIJ101中负责复制和接合转移的蛋白非常相似。pTSC2的复制元件rep、dso和sso也与pIJ101的相似。克隆、转化变铅青链霉菌ZX7以及高温链霉菌2C证明了rep和dso为复制所必需元件。Southern杂交检测到pTSC2复制过程中积累了大量的单链DNA。【结论】高温链霉菌质粒pTSC2以滚环方式进行复制。这是首次在高温链霉菌中克隆和测序质粒,以及鉴定其复制方式。     

Cloning and analysis of the replication origin and the telomeres of the large linear plasmid pSLA2-L in Streptomyces rochei

The replication origin and both terminal segments were cloned from the large linear plasmid pSLA2-L in Streptomyces rochei 7434AN4. The basic replicon consists of a 1.9-kb DNA fragment, which contains the genetic information required for autonomous replication in circular form. Sequence analysis revealed two ORFs, RepL1 and RepL2, with no similarity to any of the replication initiator proteins in the database. Deletion and mutational analysis showed that RepL1 is essential for replication and RepL2 has a subsidiary function. The origin of replication may be located 800 bp upstream of repL1. Sequencing of the left and right terminal segments revealed the presence of 12 palindromes. The sequence of the first 90 bp, including palindromes I–IV, shows great similarity to that of other Streptomyces linear chromosomes and plasmids. These results suggest that the internal replication origins of the linear replicons vary widely, in contrast to the high degree of conservation of their telomeres. Received: 2 December 1999 / Accepted: 12 April 2000