Activated charcoal induced high frequency microspore embryogenesis and efficient doubled haploid production in Brassica juncea

Three Indian Brassica juncea cultivars were studied for embryogenic response of microspores, microspore embryo regeneration, ploidy assessment of microspore-derived plants and their diploidization. Genotype dependence for microspore totipotency was observed and a significant effect of genotype by bud size selection was established. The addition of activated charcoal in NLN medium containing 13% (w/v) sucrose and 10 μM silver nitrate resulted in a fourfold increase in microspore embryogenesis, ranging from 100 to 405 embryos per Petri dish corresponding to 2,700–10,935 embryos per 100 buds. Conversion/germination of embryos produced in presence or absence of activated charcoal was similar but air-drying of microspore embryos was essential. Incubation of microspore embryos at 4 ± 1°C for 10 days in dark resulted in 82.3% conversion. The majority of plants produced from these embryos was haploid. Treating microspore-derived plants at the 3–4 leaf growth stage with 0.34% colchicine for 2–3 h resulted in greatest survival (70%) and chromosome doubling (75%) frequencies. Doubled haploid plants were self-pollinated and grown to maturity under field conditions.     

Microspore embryogenesis and the development of a double haploidy protocol for cow cockle (Saponaria vaccaria)

Factors affecting microspore embryogenesis of cow cockle (Saponaria vaccaria) were evaluated including donor plant growing conditions, genotype, bud size, density, medium composition, and culture conditions. Of the two donor plant (day/night) temperature regimes evaluated (10/5°C and 20/15°C), plants grown at 20/15°C were the most embryogenic. An embryogenic frequency of greater than 350 embryos/100 buds was observed in the most embryogenic genotype, cv. ‘White Beauty’. Buds from 3–9 mm in length were evaluated for their embryogenic potential; buds that were 4–7.9 mm produced the most embryos/100 buds. Of all the media compositions evaluated, NLN medium with 15% sucrose resulted in the most embryos. Cow cockle microspores required an initial period of 32°C for 3 days for production of microspore-derived embryos (MDEs).     

Improvement in efficiency of microspore culture to produce doubled haploid lines of Ethiopian mustard

Factors affecting microspore embryogenesis of Ethiopian mustard (Brassica carinata A. Braun) were evaluated, including flower bud length, pollen developmental stage, and microspore density. An embryogenic frequency of 300 embryos per Petri plate was observed with NLN (Nitsch-Lichter-Nitsch) medium supplemented with 13% sucrose, 3.0–3.4-mm-long buds, and a plating density of 65,000 microspores/ml. About 65% of the microspores from buds 3.0–3.4-mm long were at the late uninucleate stage. Microspore-derived embryos were successfully transferred to solid medium for germination. After 4 wk, the resulting plantlets were transplanted to a soilless potting mixture and grew well under greenhouse conditions.     

Isolated microspore culture of chickpea (<Emphasis Type="Italic">Cicer arietinum</Emphasis> L.): induction of androgenesis and cytological analysis of early haploid divisions

Routine production of haploid plants has not been reported for any legume, despite the major role these species play in sustainable farming systems and human nutrition. It is within this context that we report a protocol for the induction of haploid development in chickpea (Cicer arietinum L.) using isolated microspore culture. The cultivars “Rupali”, “Narayen”, and “Kimberley Large” were identified as responsive to isolated microspore culture. Flower bud length and microspore developmental stage were correlated for these cultivars. Depending on the cultivar, buds 2.85–3.5 mm in length contained uninucleate microspores. Microspores from donor plants grown in winter and spring were more responsive than those grown in summer. A cold treatment (4°C) of between 24 and 48 h enhanced microspore response in winter- and spring-grown material but was not effective in summer-grown material. A medium developed by the authors was effective for microspore induction and early-stage embryo development. The addition of hormones to this medium was promotive of microspore induction in winter- and spring-grown material, but not in summer-grown material. The initial haploid division predominantly occurred via symmetrical division of the vegetative nucleus. Further research is under way to convert pro-embryos into plants.     

Embryogenesis and plant regeneration from isolated microspores of Brassica rapa L. ssp. Oleifera

Summary Conditions favourable to embryogenesis from isolated microspores of Brassica rapa L. ssp. oleifera (canola quality) were identified. A population with enhanced responsiveness for microspore embryogenesis (C200) was synthesized by crossing individual plants showing microspore embryogenic potential. For optimal microspore embryogenesis, buds (2–3mm in length, containing mid-late uninucieate microspores) were collected from older plants (2 months old) and microspores isolated and washed in iron-free B5 medium. NLN medium with its iron content reduced to half was beneficial for initial microspore culture. An elevated temperature(33–35°C) during the first day of culture, followed by maintenance at 25°C resulted in dozens of embryos from each isolation (about 100 buds). Seeds were obtained from plants regenerated from microsporederived embryos after colchicine treatment.     

A high throughput <Emphasis Type="Italic">Brassica napus</Emphasis> microspore culture system: influence of percoll gradient separation and bud selection on embryogenesis

Microspore culture for the purpose of developing doubled haploid plants is routine for numerous plant species; however, the embryo yield is still very low compared with the total available microspore population. The ability to select and isolate highly embryogenic microspores would be desirable for high embryo yield in microspore culture. To maximize the efficiency of canola microspore culture, a combination of bud size selection and microspore fractionation using a Percoll gradient was followed. This approach has consistently given high embryo yields and uniform embryo development. Microspores isolated from buds 1.5 to 4.4 mm in length of Brassica napus genotypes Topas 4079, DH12075, Westar and 0025 formed embryos at different frequencies. The most embryogenic bud size range varied with each cultivar: Topas 4079 3.5–3.9 mm, DH12075 2.0–2.4 mm, and Westar and 0025 2.5–2.9 mm. When the microspores from 2.0 to 2.4 mm buds of DH12075 were carefully layered on top of a discontinuous Percoll gradient of 10, 20 and 40%, and subsequently spun through the Percoll layers by centrifugation, bands were formed containing populations of microspores of uniform developmental stage. The middle layer of the gradient contained the late uninucleate and early binucleate microspores that were the most embryogenic. In addition, the relationship between the bud size, developmental stage of isolated microspores, Percoll gradient concentration and the embryogenic frequency of each cultivar were studied. Optimization of these factors is required for each genotype evaluated.     

Genetic manipulation of microspores and microspore-derived embryos

Summary Recent advances in plant cell and molecular biology have furthered the genetic manipulation of many plant species and advanced the options for crop improvement. Among the many targets for genetic manipulation, microspores offer several unique advantages: they are haploid, single-celled, and highly synchronized. In many plant species microspores develop into haploid embryos, and eventually haploid and doubled haploid plants, after in vitro anther or microspore culture. This induced in vitro developmental pathway of microspores, termed microspore embryogenesis, can be used to recover individual homozygous plants from microspores and microspore-derived embryos after genetic manipulation such as mutagenesis and gene transfer. The highly efficient microspore embryogenesis system inBrassica napus has been used successfully to obtain various mutants after microspore mutagenesis, and to achieve gene transfer mediated byAgrobacterium tumefaciens. Presented in the Session-in-Depth In Vitro Gametophyte Biology at the 1991 World Congress on Cell and Tissue Culture held in Anaheim, California, June 16–20, 1991.     

Microspore embryogenesis in Apiaceae

Haploid technology is used to develop uniform, true-breeding lines, as well as to accelerate crop improvement programs. Among 20 Apiaceae species screened for response to doubled haploidy, 11 generated microspore-derived embryos, and all but one of the latter yielded doubled haploid plants. Donor plant conditions, basal media, and culture conditions were evaluated for their efficacy on inducing microspore-derived embryos. Growing donor plants at temperature conditions of 10/5 or 15/10°C promoted microspore embryogenesis in fennel (Foeniculum vulgare Mill.), whereas, growing donor plants at a temperature regime of 10/5°C, along with the use of a cold extraction method, enhanced embryogenesis in dill (Anethum graveolens L.) and anise (Pimpinella anisum L.). The culture of fennel and dill microspores in an NLN basal medium and caraway (Carum carvi L.) in AT-3 basal medium promoted the highest frequencies of embryo induction.     

An efficient androgenic embryogenesis and plant regeneration method through isolated microspore culture in timothy (Phleum pratense L.)

A method employing isolated microspore culture was established for the androgenic embryogenesis of timothy (Phleum pratense L). Embryos/calli were obtained and green plants regenerated. The induction medium was PG-96 (1.0 mg l⁻¹ 2,4-D, 0.1 mg l⁻¹ Kinetin) supplemented with 6% maltose monohydrate. Timothy microspore culture was genotype-dependent, among 12 genotypes, 6 produced embryos/calli and 4 produced green plants. Macerating the spikes with a blender and purifying the microspores at a mannitol/maltose monohydrate interface gave a relatively high percentage of cell vitality. The optimum microspore developmental stage was from the very late uninucleate stage to the binucleate stage. Heat shock promoted the initiation of microspore culture. Over 150 regenerated green plants were obtained; in a random sample of 32 of these 65.6% were doubled haploids (6n=42). Albinism was a problem in plant regeneration (9.3–22%). This paper is the first to describe timothy androgenic embryogenesis by isolated microspore culture. Received: 9 September 1999 / Revision received: 6 December 1999 / Accepted: 13 December 1999     

Morphogenesis in Isolated Microspore Cultures of <Emphasis Type="Italic">Brassica juncea</Emphasis>

Androgenesis is a phenomenon in which microspores are made to bypass the sexual pathway and follow the sporophytic mode of development to generate new plants without the intervention of fertilization under specialized in vitro conditions. Microspore culture provides an ideal system, with a large, relatively uniform population of haploid cells, for use in mutant selection, genetic transformation and in studies on the molecular mechanism of induction of androgenesis and embryogenesis. This paper involves a study on establishing a reproducible and efficient protocol for microspore embryogenesis in various varieties of Brassica juncea. The genotype had a pronounced effect on androgenic response in microspore cultures. The cultivar Rajat exhibited the most response, producing around 3500 embryos/100 buds. The microspores of B. juncea cv. PR-45 from ed plants maintained at a day/night temperature of 10 °C/5 °C form embryos with suspensors with varied morphology. The microspore embryos germinated to produce plants with frequencies. These plants exhibited 52% survival and 74% fertility.     

Optimization of methods for using polyethylene glycol as a non-permeating osmoticum for the induction of microspore embryogenesis in the <Emphasis Type="Italic">Brassicaceae</Emphasis>

The objective of this work was to enhance the quality and quantity of microspore-derived embryos of cruciferous species by using polyethylene glycol (PEG) to replace sucrose in the culture medium. The main advantage in using PEG is that it produces embryos that are morphologically more similar to zygotic embryos and have enhanced germination capabilities. When microspores were cultured in full strength NLN medium supplemented with 25% (w/v) PEG, the addition of 3 ml of full strength NLN with 13% (w/v) sucrose at 14 d was beneficial for embryo quality and quantity. Experiments showed that this PEG system could be used for a number of Brassica napus cultivars, as well as a number of other cruciferous species. PEG enhanced microspore embryogenesis in B. nigra, Crambe abyssinica, and Raphanus oleifera. Microspore-derived embryos were obtained from all cruciferous species evaluated (B. alboglabra, B. carinata, B. juncea, B. rapa, B. nigra, R. oleifera, Crambe abyssinica, Sinapis alba) using either sucrose or PEG as the osmoticum. Microspore embryogenesis was induced in B. napus in PEG-based cultures without a 32°C heat shock (i.e., 4, 15, 18, and 24°C). These temperature conditions were non-inductive when sucrose was used as the osmoticum. Spontaneous chromosome doubling occurred in 64–92% of the regenerated plants when PEG was used in the NLN culture medium, whereas in culture medium containing sucrose, the spontaneous doubling rate was 2–18%.     

A microspore embryogenesis protocol for <Emphasis Type="Italic">Camelina sativa,</Emphasis> a multi-use crop

Camelina [Camelina sativa (L.) Crantz], a member of the Brassicaceae family, has a unique oil profile that has potential both for biofuels and as a food crop. It is essential to have a doubled haploidy protocol in order to enhance breeding of this crop for prairie conditions as well as improve the yield and quality characteristics. Microspore-derived embryos have been produced from Camelina sativa. Buds 1–3 mm in length were selected for culture. The microspores were isolated and purified in full-strength B5 extraction medium and cultured in NLN medium with 12.5% sucrose and 12.5% polyethylene glycol 4000 (PEG) without glutamine, at a density of 10,000 microspores per mL. Glutamine was added to the cultures 72 h after extraction to give a final concentration of 0.8 g/L. The microspore cultures were maintained at 24°C in the dark. After 28 days embryos were observed and these were regenerated to plants and selfed seed was produced. The highest embryogenic frequency achieved was 38 microspore-derived embryos from 100,000 microspores.     

Microspore culture of radish (Raphanus sativus L.): influence of genotype and culture conditions on embryogenesis

A number of factors influencing embryogenesis from isolated microspores of radish (Raphanus sativus) were examined. Of 11 genotypes evaluated, six produced embryos ranging from 8.3 embryos per 10⁵ microspores for Chugoku-ao to 0.2 for Tenshun, but five genotypes were not responsive. An initial culture period at elevated temperature before incubation at 25°C was essential for induction of microspore embryogenesis. However, the optimum period of the treatment varied among genotypes and/or experiments. Bud size also influenced microspore embryogenesis. Though optimum bud size was different between genotypes, the microspore populations represented in these buds contained uninucleate and binucleate microspores. Selection of embryogenic microspores using percoll density gradient resulted in up to 1.3-fold increase of embryo yield. Though almost all embryos failed to develop directly into plantlets, plants were obtained by multiple subcultures. The regenerated plants had hyperploid chromosome numbers.     

Initiation and development of microspore embryogenesis and plant regeneration of Brassica nigra

Brassica nigra is generally regarded as a recalcitrant species for microspore culture among Brassica crops. Conditions for reliable induction of microspore embryogenesis of B. nigra were studied in this context. Flower bud length and microspore developmental stage were correlated with further embryogenesis. The optimal bud size range was 2.0–2.5 mm for the highest proportion of totipotent, late uninucleate microspore and the highest frequency of microspore embryogenesis. Treatment of a short heat shock by incubating the microspore culture at 32°C for 24 h was suitable for the microspore survival, sustained cell divisions, and further induced embryogenesis. Subsequently, the use of NLN medium with the addition of 13% sucrose and 0.1% activated charcoal (AC) provided the optimal conditions for the development of microspore-derived embryos (MDEs). The early cotyledonary (EC) stage embryos cultured on MS medium fortified with 4.6 μM zeatin (ZT) and 0.12 μM indole-3-acetic acid (IAA) resulted in the most efficient rates of plantlet regeneration. The ploidy levels of regenerated plants of B. nigra were determined by flow cytometry, revealing that 50.6% were diploid. The results enable the advancement of breeding programs and genetic studies in B. nigra.     

Embryogenesis and plant regeneration of hot pepper (<Emphasis Type="Italic">Capsicum annuum</Emphasis> L.) through isolated microspore culture

We report high frequencies of embryo production and plant regeneration through isolated microspore culture of hot pepper (Capsicum annuum L.). Microspores cultured in modified NLN medium (NLNS) divided and developed to embryos. Globular and heart-shaped embryos were observed from 3 weeks after the beginning of culture, and many embryos reached the cotyledonary stage after 4 weeks of culture. These cotyledonary embryos developed to plantlets after transfer to solid B5 basal medium. We also optimized conditions for embryo production by varying the pretreatment media, the carbon sources, and culture densities. Heat shock treatment in sucrose-starvation medium was more effective than in B5 medium. Direct comparisons of sucrose and maltose as carbon sources clearly demonstrated the superiority of sucrose compared to maltose, with the highest frequency of embryo production being obtained in 9% (w/v) sucrose. Microspore plating density was critical for efficient embryonic induction and development, with an optimal plating density of 8 × 10⁴–10 × 10⁴/ml. Under our optimized culture conditions, we obtained over 54 embryos, and an average of 5.5 cotyledonary embryos when 10 × 10⁴ microspores were grown on an individual plate.     

Isolated microspore culture of Canadian 6× triticale cultivars

Isolated microspore culture was conducted on nine Canadian triticale cultivars (X Triticosecale Wittmack) using two induction media developed for wheat, with or without 100 g l⁻¹ Ficoll. Significant interactions were observed for the number of embryos and calluses induced, green and albino plantlets regenerated and fertility of green plants. Ficoll was beneficial in both media to increase numbers of embryos and green plants for all cultivars. Overall, medium NPB99 supplemented with ficoll provided the most suitable condition for most cultivars. AC Alta performed slightly better on CHB3 supplemented with Ficoll. Only cv. Wapiti was not amenable to androgenesis. The cultivars AC Certa, AC Copia, AC Alta, Sandro, Ultima, Frank, Pronghorn and Banjo produced respectively, 10, 9, 6, 5, 4, 3, 3 and 1 green plants per Petri dish (35,000 microspores), on their optimum treatment. Twenty-two percent of total lines produced were fertile, and considered doubled haploids. The application of isolated microspore culture to triticale, opens new possibilities in breeding triticale, for the utilization of in vitro selection and genetic engineering.     

Prospects of androgenetic induction in <Emphasis Type="Italic">Lupinus</Emphasis> spp.

Anthers cultures of six Polish cultivars of pasture lupin (Lupinus L.) were examined for their androgenic response. Anthers with microspores at the uninucleate stage were isolated from flower buds and cultured in liquid media. Better viability of androgenetic structures was obtained when donor plants had grown under field as opposed to greenhouse conditions. A density of five anthers per 0.5 ml medium was more conducive to androgenetic induction than 25 anthers per 0.5 ml medium. Addition of 5% maltose to the induction medium and culture at 25°C without pre-treatment of flowers, buds or anthers promoted microspore release and division. The greatest frequency of androgenic callus, ~70% was developed from cvs. Katon, Wat (white lupin), in contrast to cvs. Legat, Juno (yellow lupin), Polonez and Sonet (narrow-leafed lupin) with callus induction ~30–40%. Despite various combinations of media tested, plant regeneration was not obtained from anther derived callus.     

Zinc sulphate improved microspore embryogenesis in barley

The effect of ZnSO₄ concentration on barley (Hordeum vulgare L.) microspore embryogenesis was investigated using cultivars of different androgenetic response. Concentrations from 0 (control) to 600 μM in the stress pre-treatment medium alone or in combination with 30 (control) to 600 μM in the embryo induction medium were assayed in anther culture. Incorporation of Zn²⁺ in the pre-treatment medium itself did not affect microspore embryogenesis. The optimum concentration in the stress pre-treatment and induction media was 180 μM for cultivars (cvs.) Igri and Reinette, and 90 μM for cv. Hop. A significant increase of 30 and 300% in cv. Igri and Reinette, respectively, were produced with 180 μM ZnSO₄ in both the number of embryos and green plants. In order to confirm the effect of Zn²⁺ on microspore embryogenesis this micronutrient was incorporated in the induction medium of isolated microspore cultures of cv. Igri. Concentrations of 90–300 μM ZnSO₄ resulted in an increase of 40–53% in the number of embryos and green plants. All these results indicate that the beneficial effect of Zn²⁺ is exerted mainly during the culture phase, increasing the number of embryos, leading to an increased number of green plants, but it had no effect on percentage of regeneration or green plants.     

Efficient embryogenesis and regeneration in freshly isolated and cultured wheat (Triticum aestivum L.) microspores without stress pretreatment

The major advantage of doubled haploids in plant breeding is the immediate achievement of complete homozygosity. Desired genotypes are thus fixed in one generation, reducing time and cost for cultivar or inbred development. Among the different technologies to produce doubled haploids, microspore embryogenesis is by far the most common. It usually requires reprogramming of microspores by stress such as cold, heat, and starvation, followed by embryo development under stress-free conditions. We report here the development of a simple and efficient isolated microspore culture system for producing doubled haploid wheat plants in a wide spectrum of genotypes, in which embryogenic microspores and embryos are formed without any apparent stress treatment. Microspores were isolated from fresh spikes in a nutrient-free medium by stirring and cultured in medium A2 in the dark at 25°C. Once embryogenic microspores were formed, ovaries and phytohormones were added directly to the cultures without changing the medium. The cultures were incubated in the dark at 25–27°C until the formation of embryos and then the embryos were transferred to regeneration medium. The regeneration frequency and percentage of green plants increased significantly using this protocol compared to the shed microspore culture method.Communicated by W. Harwood     

Microspore embryogenesis of high sn-2 erucic acid Brassica oleracea germplasm

Brassica oleracea accessions possess traits that would be useful in commercial Brassica crops. These traits can be studied more effectively through the production of doubled haploid plants. Nineteen B. oleracea accessions from several subspecies possessing significant sn-2 erucic acid were screened for suitability for microspore culture using techniques well established for Brassica. Fifteen of the 19 accessions produced embryos. Genotypic differences were observed with embryogenesis ranging from 0 to 3000 embryos/100 buds. Embryogenesis was improved for two of four accessions by initiating cultures in NLN medium with 17% sucrose, then reducing sucrose to 10% after 48 h. An increase in embryogenesis for the same two accessions was observed when microspores were cultured at a density of 100 000/ml rather than 50 000 microspores/ml. A culture temperature of 32 °C for 48 h was beneficial for three of the four accessions when compared to a longer incubation period (72 h) or a higher temperature (35 °C). One accession line, Bo-1, was found to produce microspore-derived embryos which contained triacylglycerols with significant proportions of erucic acid at the sn-2 position. This revised version was published online in June 2006 with corrections to the Cover Date.