Unraveling the Nanoscale Surface Properties of Chitin Synthase Mutants of?Aspergillus fumigatus and Their Biological Implications

Understanding the surface properties of the human opportunistic pathogen Aspergillus fumigatus conidia is essential given the important role they play during the fungal interactions with the human host. Although chitin synthases with myosin motor-like domain (CSM) play a major role in cell wall biosynthesis, the extent to which deletion of the CSM genes alter the surface structural and biophysical-biological properties of conidia is not fully characterized. We used three complementary atomic force microscopy techniques—i.e., structural imaging, chemical force microscopy with hydrophobic tips, and single-molecule force spectroscopy with lectin tips—to gain detailed insights into the nanoscale surface properties (ultrastructure, hydrophobicity) and polysaccharide composition of the wild-type and the chitin synthase mutant (ΔcsmA, ΔcsmB, and ΔcsmA/csmB) conidia of A. fumigatus. Wild-type conidia were covered with a highly hydrophobic layer of rodlet nanostructures. By contrast, the surface of the ΔcsmA mutant was almost completely devoid of rodlets, leading to loss of hydrophobicity and exposure of mannan and chitin polysaccharides. The ΔcsmB and ΔcsmA/csmB mutants showed a different behavior, i.e., the surfaces featured poorly organized rodlet layers, yet with a low hydrophobicity and substantial amounts of exposed mannan and chitin at the surface. As the rodlet layer is important for masking recognition of immunogenic fungal cell wall components by innate immune cells, disappearance of rodlet layers in all three chitin synthase mutant conidia was associated with an activation of human dendritic cells. These nanoscale analyses emphasize the important and distinct roles that the CSMA and CSMB genes play in modulating the surface properties and immune interactions of A. fumigatus and demonstrate the power of atomic force microscopy in fungal genetic studies for assessing the phenotypic characteristics of mutants altered in cell surface organization.     

Effects of media composition on submerged culture spores of the entomopathogenic fungus, Metarhizium anisopliae var. acridum, Part 1: Comparison of cell wall characteristics and drying stability among three spore types

Metarhizium anisopliae var. acridum (IMI 330189) can produce at least three spore types in vitro; blastospores, submerged conidia, and aerial conidia, as defined by culturing conditions, sporogenesis, and spore morphology. This study compares morphological characteristics (dimensions and cell wall structure), chemical properties of cell wall surfaces (charge, hydrophobicity, and lectin binding), and performance (germination rate and drying stability) among these three spore types. Submerged conidia and aerial conidia both possessed thick, double-layered cell walls, with hydrophobic regions on their surfaces. However, in contrast to aerial conidia, submerged conidia have: (1) a greater affinity for the lectin concanavalin-A; (2) more anionic net surface charge; and (3) a less distinct outer rodlet layer. Blastospores were longer and more variable in length than both submerged conidia and aerial conidia, and had thinner single-layered cell walls that lacked an outer rodlet layer. Also, blastospores had a greater affinity than either conidia type for the lectin, wheat germ agglutinin. Blastaspores lacked hydrophobic regions on their surface, and had a lower anionic net surface charge than submerged conidia. In culture, blastospores germinated the fastest followed by submerged conidia, and then aerial conidia. Survival of submerged conidia and aerial conidia were similar after drying on silica gel, and was greater than that for blastospores. We provide corroborating information for differentiating spore types previously based on method of production, sporogenesis, and appearance of spores. These physical characteristics may have practical application for predicting spore-performance characteristics relevant to production and efficacy of mycoinsecticides.     

Conidial hydrophobins of Aspergillus fumigatus

The surface of Aspergillus fumigatus conidia, the first structure recognized by the host immune system, is covered by rodlets. We report that this outer cell wall layer contains two hydrophobins, RodAp and RodBp, which are found as highly insoluble complexes. The RODA gene was previously characterized, and DeltarodA conidia do not display a rodlet layer (N. Thau, M. Monod, B. Crestani, C. Rolland, G. Tronchin, J. P. Latgé, and S. Paris, Infect. Immun. 62:4380-4388, 1994). The RODB gene was cloned and disrupted. RodBp was highly homologous to RodAp and different from DewAp of A. nidulans. DeltarodB conidia had a rodlet layer similar to that of the wild-type conidia. Therefore, unlike RodAp, RodBp is not required for rodlet formation. The surface of DeltarodA conidia is granular; in contrast, an amorphous layer is present at the surface of the conidia of the DeltarodA DeltarodB double mutant. These data show that RodBp plays a role in the structure of the conidial cell wall. Moreover, rodletless mutants are more sensitive to killing by alveolar macrophages, suggesting that RodAp or the rodlet structure is involved in the resistance to host cells.     

High-resolution cell surface dynamics of germinating Aspergillus fumigatus conidia

We used real-time atomic force microscopy with a temperature-controlled stage (37°C) to probe the structural and physicochemical dynamics of single Aspergillus fumigatus conidia during germination. Nanoscale topographic images of dormant spores revealed the presence of a layer of rodlets made of hydrophobins, in agreement with earlier electron microscopy observations. Within the 3-h germination period, progressive disruption of the rodlet layer was observed, revealing hydrophilic inner cell wall structures. Using adhesion force mapping with hydrophobic tips, these ultrastructural changes were shown to correlate with major differences in cell surface hydrophobicity. That is, the rodlet surface was uniformly hydrophobic due to the presence of hydrophobins, whereas the cell wall material appearing upon germination was purely hydrophilic. This study illustrates the potential of real-time atomic force microscopy imaging and force spectroscopy for tracking cell-surface dynamics.     

Electron microscopy of the rodlet layer of Neurospora crassa conidia.

Neurospora crassa macroconidia possess a regularly arranged layer of small fibers (rodlets) near the spore surface. The structure and location of this layer were studied by making surface replicas, by negative staining, by freeze-fracturing and deep-etching, and by thin sectioning. When conidia were shaken vigorously in water, the layer fragmented and became separated from the surface in sheets. Negative staining of such sheets showed that the individual rodlets have a hollow central core. When conidia were shaken gently in water or fixative, large fragments of the rodlet layer often remained on the conidial surface. The fragments tended to fold back on each other such that multiple layers were sometimes seen in thin sections. It is concluded that in dry conidia the rodlets are located on the extreme outside of the spore where they form a monolayer with only occasional regions of overlap.     

Repeated in vitro subculturing alters spore surface properties and virulence of Metarhizium anisopliae

Repeated subculturing caused rapid changes in the spore surface properties and virulence of Metarhizium anisopliae. Of the two strains evaluated, M. anisopliae V245 attenuated more rapidly than V275. Electrophoretic mobility and Radial Flow Chamber assays were used for the first time to generate qualitative and quantitative information on the adhesive forces of M. anisopliae conidia. Independent of strain, adhesion, hydrophobicity and spore-bound Pr1 declined after the first subculture; however, spore surface charge decline was erratic. Adhesion and hydrophobicity stabilized after the third subculture, whereas spore-bound Pr1 continues to decline following repeated subculturing. Decline in spore bound Pr1 was directly correlated with decline in virulence, however, such correlation with adhesion, hydrophobicity or surface charge could not be established. Because spore-bound Pr1 activities were directly correlated with M. anisopliae virulence; it could be used as a quality-control marker to monitor changes in virulence.     

Characteristics of Streptomyces coelicolor A3(2) aerial spore rodlet mosaic

Cytochemical analysis of Streptomyces coelicolor (A3(2) indicated that the aerial growth rodlet mosaic is a polysaccharide. Statistical analysis of frequency distributions of individual rodlet lengths from control and ether-reoriented spore mosaics indicated that the rodlet fibrillar image is the result of individual particulates, rather than evaginations in a continuous sheet of material. A model of the mature sport envelope was developed from freeze-etch-replicated, thin-sectioned, and critical point dried S. coelicolor A3(2) mature spores. The rodlet mosaic was situated between the outer spore wall and an external granuloma matrix. Mixture spore envelope layers from the inner surface to the external surface are plasma membrane, inner spore wall, outer spore wall, rodlet mosaic, an undefined granular matrix, and the sheath. The granular matrix had an uneven thickness and much of the matrix was frequently absent from the interspore spaces of mature spore chains. Streptomyces coelicolor A3(2) mosaic rodlets were isolated by acetic acid refluxing, then ethanol precipitation. Complete acid hydrolysis of rodlets released on sugar which cochromatographed with D-glucosamine-HCl and released acetic acid at 139% of the expected level. Cell associated rodlet mosaics and isolated mosaic rodlets were hydrolyzed with chitinase. Infrared spectra of isolated rodlets were similar to crab chitin spectra.     

The role of the rodlet structure on the physicochemical properties of Aspergillus conidia

Physico-chemical properties of Aspergillus conidia rely on their outer cell-wall rodlet layer. In A. fumigatus and A. nidulans, the rodlet structure is due to an hydrophobin encoded by homologous rodA genes. To evaluate the role of the rodlet structure on the physico-chemical properties of conidia, we compared hydrophobicity, Lewis acid-base (i.e. electron donor/acceptor) characteristics and electrostatic charge of hydrophobin-less (rodletless) mutant and wild-type conidia of A. fumigatus and A. nidulans. The results obtained by aqueous-solvent partitioning assays, microsphere adhesion assays and microelectrophoresis showed that the disruption of the rodA gene modifies surface properties of A. fumigatus and A. nidulans conidia, and confirmed that the rodlet layer plays a key role in their physico-chemical behaviour. The absence of this layer on A. fumigatus spores led to the appearance of weakly basic and acidic characteristics, and had a slight effect on the hydrophobicity of conidia. Whereas in A. nidulans, it induced a basic character, a marked decrease in hydrophobicity and in the polarization capacity (electronegativity) of conidia. These physico-chemical differences between A. fumigatus and A. nidulans rodletless conidia may be attributed to differences in the composition of the conidial outer cell-wall of the two species.     

The role of initial spore adhesion in pellet and biofilm formation in Aspergillus niger

Fungi grow on a great variety of organic and inorganic materials. Colony establishment and growth on solid surfaces require adhesion of spores and hyphae to the substrate, while cell-to-cell interactions among spores and/or hyphae are a prerequisite for the development of three-dimensional mycelial structures such as pellets or biofilms. Surface adherence has been described as a two-step process, comprised of the initial attachment of ungerminated conidia followed by further adhesion of the forming germ tubes and growing hyphae. In the present study, we analyzed the contribution of adhesion of ungerminated spores to pellet and biofilm formation in Aspergillus niger. Mutants deficient in melanin biosynthesis were constructed by the deletion of the alb1 gene, encoding a polyketide synthase essential for pigment biosynthesis. Δalb1 conidia have an altered surface structure and changed physicochemical surface properties. Spore aggregation in liquid culture as well as spore surface attachment differ between the wild type and the mutant in a pH-dependent manner. In liquid culture further pellet formation is unaffected by altered spore-spore interactions, indicating that germ tube and hyphal adherence can compensate for deficiencies in the initial step of spore attachment. In contrast, under conditions promoting adhesion of Δalb1 conidia to polymer surfaces the mutant forms more stable biofilms than the wild type, suggesting that initial spore adhesion supports sessile growth.     

Conidial Hydrophobins of Aspergillus fumigatus

The surface of Aspergillus fumigatus conidia, the first structure recognized by the host immune system, is covered by rodlets. We report that this outer cell wall layer contains two hydrophobins, RodAp and RodBp, which are found as highly insoluble complexes. The RODA gene was previously characterized, and ΔrodA conidia do not display a rodlet layer (N. Thau, M. Monod, B. Crestani, C. Rolland, G. Tronchin, J. P. Latgé, and S. Paris, Infect. Immun. 62:4380-4388, 1994). The RODB gene was cloned and disrupted. RodBp was highly homologous to RodAp and different from DewAp of A. nidulans. ΔrodB conidia had a rodlet layer similar to that of the wild-type conidia. Therefore, unlike RodAp, RodBp is not required for rodlet formation. The surface of ΔrodA conidia is granular; in contrast, an amorphous layer is present at the surface of the conidia of the ΔrodA ΔrodB double mutant. These data show that RodBp plays a role in the structure of the conidial cell wall. Moreover, rodletless mutants are more sensitive to killing by alveolar macrophages, suggesting that RodAp or the rodlet structure is involved in the resistance to host cells.     

Chemical composition and electron microscopy of the rodlet layer ofAspergillus nidulans conidia

The rodlet layers of wild-type and white mutantAspergillus nidulans conidia were purified by a simple centrifugation procedure after conidial suspensions were subjected to sonication. Chemical analysis showed that the major components of wild-type rodlets were protein and melanin in almost equal amounts, followed by carbohydrate. White mutant rodlets differed from those of the wild-type strain in that the melanin content was very low. Histidine, aspartic acid, glutamic acid, glycine, and alanine were the most prominent amino acids in the rodlet layer of the white mutant, whereas cystine and methionine were not found. Electron microscopy studies showed that the rodlets of both white mutant and wild-type strains were grouped into fascicles, which varied from 80 to 160 nm in width. Individual rodlets measured 125–360 nm in length and 7 nm in diameter.     

Effects of media composition on submerged culture spores of the entomopathogenic fungus,Metarhizium anisopliae var. acridum Part 2: Effects of media osmolality on cell wall characteristics,carbohydrate concentrations,drying stability,and pathogenicity

This study evaluates osmolality of a submerged conidia-producing medium in relation to the following spore characteristics: yield, morphology (dimensions and cell wall structure), chemical properties of cell wall surfaces (charge, hydrophobicity, and lectin binding), cytoplasmic polyols and trehalose, and performance (drying stability and pathogenicity). Spore production was increased by the addition of up to 150 g l^?1 polyethylene glycol 200 (PEG). Spores from high osmolality medium (HOM spores) containing 100 g l^?1 PEG had thin cell walls and dimensions more similar to blastospores than submerged conidia or aerial conidia. However, a faint electron-dense layer separating primary and secondary HOM spores’ cell walls was discernable by transmission electron microscopy as found in aerial and submerged conidia but not found in blastospores. HOM spores also appeared to have an outer rodlet layer, unlike blastospores, although it was thinner than those observed in submerged conidia. HOM spores’ surfaces possessed hydrophobic microsites, which was further evidence of the presence of a rodlet layer. In addition, HOM spores had concentrations of exposed N-acetyl-β-d-glucosaminyl residues intermediate between blastospores and submerged conidia potentially indicating a masking of underlying cell wall by a rodlet layer. All spore types had exposed α-d-mannosyl and/or α-d-glucosyl residues, but lacked oligosaccharides. Similar to blastospores, HOM spores were less anionic than submerged conida. Although HOM spores had thin cell walls, they were more stable to drying than blastospores and submerged conidia. Relative drying stability did not appear to be the result of differences in polyol or trehalose concentrations, since trehalose concentrations were lower in HOM spores than submerged conidia and polyol concentrations were similar between the two spore types. HOM spores had faster germination rates than submerged conidia, similar to blastospores, and they were more pathogenic to Schistocerca americana than submerged conidia and aerial conidia.     

Functional analysis of the Alternaria brassicicola non-ribosomal peptide synthetase gene AbNPS2 reveals a role in conidial cell wall construction

Alternaria brassicicola is a necrotrophic pathogen causing black spot disease on virtually all cultivated Brassica crops worldwide. In many plant pathosystems fungal secondary metabolites derived from non-ribosomal peptide synthetases (NPSs) are phytotoxic virulence factors or are antibiotics thought to be important for niche competition with other micro-organisms. However, many of the functions of NPS genes and their products are largely unknown. In this study, we investigated the function of one of the A. brassicicola NPS genes, AbNPS2 . The predicted amino acid sequence of AbNPS2 showed high sequence similarity with A. brassicae , AbrePsy1, Cochliobolus heterostrophus , NPS4 and a Stagonospora nodorum NPS. The AbNPS2 open reading frame was predicted to be 22 kb in length and encodes a large protein (7195 amino acids) showing typical NPS modular organization. Gene expression analysis of AbNPS2 in wild-type fungus indicated that it is expressed almost exclusively in conidia and conidiophores, broadly in the reproductive developmental phase. AbNPS2 gene disruption mutants showed abnormal spore cell wall morphology and a decreased hydrophobicity phenotype. Conidia of abnps2 mutants displayed an aberrantly inflated cell wall and an increase in lipid bodies compared with wild-type. Further phenotypic analyses of abnps2 mutants showed decreased spore germination rates both in vitro and in vivo , and a marked reduction in sporulation in vivo compared with wild-type fungus. Moreover, virulence tests on Brassicas with abnps2 mutants revealed a significant reduction in lesion size compared with wild-type but only when aged spores were used in experiments. Collectively, these results indicate that AbNPS2 plays an important role in development and virulence.     

Nonspecific Factors Involved in Attachment of Entomopathogenic Deuteromycetes to Host Insect Cuticle

The attachment of the conidia of the insect-pathogenic fungi Nomuraea rileyi, Beauveria bassiana, and Metarrhizium anisopliae to insect cuticle was mediated by strong binding forces. The attachment was passive and nonspecific in that the conidia adhered readily to both host and nonhost cuticle preparations. The hydrophobicity of the conidial wall and the insect epicuticle appeared to mediate the adhesion process. Detergents, solvents, and high-molecular-weight proteins known to neutralize hydrophobicity reduced conidial binding when added to conidium-cuticle preparations. However, these chemicals did not remove the hydrophobic components from the epicuticle or from conidial preparations. The outer surface of the conidium consists of a resilient layer of well-organized fascicles of rodlets. Intact rodlets extracted from B. bassiana conidia bound to insect cuticle and exhibited the hydrophobicity expressed by intact conidia. Both electrostatic charges and various hemagglutinin activities were also present on the conidial surface. However, competitive-inhibition studies indicated that these forces played little, if any, role in the adhesion process.     

Six Hydrophobins Are Involved in Hydrophobin Rodlet Formation in Aspergillus nidulans and Contribute to Hydrophobicity of the Spore Surface

Hydrophobins are amphiphilic proteins able to self-assemble at water-air interphases and are only found in filamentous fungi. In Aspergillus nidulans two hydrophobins, RodA and DewA, have been characterized, which both localize on the conidiospore surface and contribute to its hydrophobicity. RodA is the constituent protein of very regularly arranged rodlets, 10 nm in diameter. Here we analyzed four more hydrophobins, DewB-E, in A. nidulans and found that all six hydrophobins contribute to the hydrophobic surface of the conidiospores but only deletion of rodA caused loss of the rodlet structure. Analysis of the rodlets in the dewB-E deletion strains with atomic force microscopy revealed that the rodlets appeared less robust. Expression of DewA and DewB driven from the rodA promoter and secreted with the RodA secretion signal in a strain lacking RodA, restored partly the hydrophobicity. DewA and B were able to form rodlets to some extent but never reached the rodlet structure of RodA. The rodlet-lacking rodA-deletion strain opens the possibility to systematically study rodlet formation of other natural or synthetic hydrophobins.     

The Arthroderma benhamiae hydrophobin HypA mediates hydrophobicity and influences recognition by human immune effector cells

Dermatophytes are the most common cause of superficial mycoses in humans and animals. They can coexist with their hosts for many years without causing significant symptoms but also cause highly inflammatory diseases. To identify mechanisms involved in the modulation of the host response during infection caused by the zoophilic dermatophyte Arthroderma benhamiae, cell wall-associated surface proteins were studied. By two-dimensional gel electrophoresis, we found that a hydrophobin protein designated HypA was the dominant cell surface protein. HypA was also detected in the supernatant during the growth and conidiation of the fungus. The A. benhamiae genome harbors only a single hydrophobin gene, designated hypA. A hypA deletion mutant was generated, as was a complemented hypA mutant strain (hypA(C)). In contrast to the wild type and the complemented strain, the hypA deletion mutant exhibited "easily wettable" mycelia and conidia, indicating the loss of surface hydrophobicity of both morphotypes. Compared with the wild type, the hypA deletion mutant triggered an increased activation of human neutrophil granulocytes and dendritic cells, characterized by an increased release of the immune mediators interleukin-6 (IL-6), IL-8, IL-10, and tumor necrosis factor alpha (TNF-α). For the first time, we observed the formation of neutrophil extracellular traps against dermatophytes, whose level of formation was increased by the ΔhypA mutant compared with the wild type. Furthermore, conidia of the ΔhypA strain were killed more effectively by neutrophils. Our data suggest that the recognition of A. benhamiae by the cellular immune defense system is notably influenced by the presence of the surface rodlet layer formed by the hydrophobin HypA.     

Analysis of autophagy in Aspergillus oryzae by disruption of Aoatg13, Aoatg4, and Aoatg15 genes

Autophagy is a degradation system in which cellular components are digested via vacuoles/lysosomes, and involved in differentiation in addition to helping cells to survive starvation. The autophagic process is composed of several steps: induction of autophagy, formation of autophagosomes, transportation to vacuoles, and degradation of autophagic bodies. To further understand autophagy in the filamentous fungus Aspergillus oryzae, we first constructed A. oryzae mutants defective for the Aoatg13, Aoatg4, and Aoatg15 genes and examined the resulting phenotypes. The ΔAoatg13 mutant developed conidiophores and conidia, although the number of conidia was decreased compared with the wild-type strain, while conidiation in the ΔAoatg4 and ΔAoatg15 mutants was not detected. The ΔAoatg15 mutants displayed a marked reduction of development of aerial hyphae. Moreover, autophagy in these mutants was examined by observation of the behavior of enhanced green fluorescent protein (EGFP)-AoAtg8. In the ΔAoatg13 mutant, the slight accumulation of EGFP-AoAtg8 in vacuoles, preautophagosomal structures (PAS), and autophagosomes was observed, whereas only PAS-like structures were detected in the ΔAoatg4 mutant. In the ΔAoatg15 mutant, autophagic bodies accumulated in vacuoles, suggesting that the uptake process proceeded. We therefore propose that the level of autophagy is closely correlated with the degree of differentiation in A. oryzae.     

A comparison of the virulence,stability and cell-wall-surface characteristics of three spore types produced by the entomopathogenic fungus Beauveria bassiana

Summary Beauveria bassiana can produce three spore types; aerial conidia, submerged conidia and blastospores. We have examined the spore surface characteristics (hydrophobicity and cell-wall surface lectins), thermal inactivation and the virulence towards the migratory grasshopper, Melanoplus sanguinipes, of each of the three spore types. The hydrophobicities of the aerial and submerged conidia were quite similar. Blastospores were less hydrophobic than either of the two types of conidia. Hydrophobic interactions are thought to play a significant role in attachment of the spore to the host organism. However, the less hydrophobic blastospores were slightly more virulent (LT₅₀ of 6.50 days) when compared to the aerial and submerged conidia (7.12 and 7.24 days), respectively. The lectin-binding characteristics of the aerial and submerged conidia were very similar but differed from that of blastospores. Growth of blastospores on a variety of carbohydrates did not affect their lectin-binding characteristics. Spore viability measurements showed that aerial and submerged conidia retained their viability for a longer period than blastospores. The similarity in hydrophobicity, stability, virulence and lectin-binding of aerial and submerged conidia make the latter an ideal candidate for mycoinsecticide production since they can be recovered after growth on inexpensive substrates.Offprint requests to: G. G. Khachatourians     

The key gluconeogenic gene PCK1 is crucial for virulence of Botrytis cinerea via initiating its conidial germination and host penetration

The process of initiation of host invasion and survival of some foliar phytopathogenic fungi in the absence of external nutrients on host leaf surfaces remains obscure. Here, we demonstrate that gluconeogenesis plays an important role in the process and nutrient‐starvation adaptation before the pathogen host invasion. Deletion of phosphoenolpyruvate c arboxyk inase gene BcPCK1 in gluconeogenesis in Botrytis cinerea, the causative agent of grey mould, resulted in the failure of the ΔBcpck1 mutant conidia to germinate on hard and hydrophobic surface and penetrate host cells in the absence of glucose, reduction in conidiation and slow conidium germination in a nutrient‐rich medium. The wild‐type and ΔBcpck1 conidia germinate similarly in the presence of glucose (higher concentration) as the sole carbon source. Conidial glucose‐content should reach a threshold level to initiate germination and host penetration. Infection structure formation by the mutants displayed a glucose‐dependent fashion, which corresponded to the mutant virulence reduction. Exogenous glucose or complementation of BcPCK1 completely rescued all the developmental and virulence defects of the mutants. Our findings demonstrate that BcPCK1 plays a crucial role in B. cinerea pathogenic growth and virulence, and provide new insights into gluconeogenesis mediating pathogenesis of plant fungal pathogens via initiation of conidial germination and host penetration.