Colony formation and plant regeneration from mesophyll protoplasts of Solanum etuberosum

A procedure for the culture of Solanum etuberosum mesophyll protoplasts with subsequent shoot regeneration is described. Several factors affected protoplast yield, colony formation, and shoot regeneration from in vitro plants. A protoplast isolation medium with 0.6 M sucrose produced twice the yield as one with 0.3 M sucrose. uowever, a higher concentration of osmoticum was inhibitory to colony development unless it was diluted into a lower osmoticum medium in a bilayer system. A 16 hour light/8 hour dark photoperiod for stock plants allowed twice the protoplast yield compared to plants grown under continuous light but no effect was found on subsequent colony formation or shoot regeneration. The concentrations of four major salts in the protoplast plating medium were critical for a high frequency of colony formation from protoplasts. Levels of 0.25 × or 1 × were considerably better than 4 ×. Fast colony formation, but at a lower efficiency, was obtained with a monolayer plating method. A bilayer plating system allowed a higher efficiency but colonies developed more slowly. For the best treatments, the frequency of colony formation from protoplasts ranged from 2.4 to 3.6 × 10^-3 with 37% to 66% of the colonies producing shoots ten weeks after protoplast isolation.Cooperative investigation of the USDA-ARS and the Wisconsin Agric. Exp. Stn.     

An improved procedure for plant regeneration from indica and japonica rice protoplasts

Plant regeneration from protoplasts of two commercially cultivated Indian indica rice varieties, Pusa Basmati 1 and Java, has been accomplished by plating embryogenic cell suspension-derived protoplasts on the surface of filter membranes overlying agarose-embedded feeder cells of Lolium multltiflorum and Oryza ridleyi, combined with the use of a maltose-containing shoot regeneration medium. Embryogenic cell suspension cultures of Pusa Basmati 1 and Jaya were initiated from mature seed scutellum-derived calli in liquid R₂ medium modified by the addition of 560 mg l^–1 of proline and 1.0 % (w/v) maltose. In both varieties, protoplast plating efficiencies up to 0.4 % were obtained, depending on the nature of the feeder cells. L. multiflorum feeder cells induced a 6-fold higher plating efficiency than feeder cells of O. ridleyi. In combination, O. ridleyi and L. multiflorum feedercells further enhanced protoplast plating efficiency. Protoplast-derived cell colonies were not obtained from protoplasts of either indica varieties in the absence of feeder cells. MS-based medium containing kinetin (2.0 mg l^–1) and -naphthaleneacetic acid (0.5 mg 1^–1), together with sucrose and maltose both at 1.5 % (w/v), induced green shoot regeneration in 44 % of protoplast-derived tissues, depending on the feeder cells used for protoplast culture. In both varieties, tissues obtained using O. ridleyi feeder cells were more morphogenic than tissues obtained using L. multiflorum feeder cells, either alone or in combination with cells of O. ridleyi. In the japonica rice variety Taipei 309, this new procedure resulted in a 30-fold increase in plant regeneration from protoplasts compared to previous published procedures.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - FDA fluorescein diacetate - GPFs growth promoting factors - NAA -naphthaleneacetic acid On leave from Department of Genetics, Haryana Agricultural University, Hisar, IndiaOn leave from Biotechnology Centre, Punjab Agricultural University, Ludhiana, India     

An efficient and rapid procedure for plantlet regeneration from chicory mesophyll protoplasts

An efficient procedure for plantlet regeneration from chicory mesophyll protoplasts has been developed in order to perform protoplast fusion experiments. Protoplasts were isolated from a genotype of Italian red chicory (CH 363) and purified by centrifugation in a solution containing 13% (w/v) sucrose to collect uniform protoplasts in size. After 2 days culture at a density of 2×10⁴ protoplasts ml⁻¹ of liquid medium, protoplasts were cultured following three different procedures: in liquid medium, stratified in semi-solid medium, and embedded in Ca-alginate droplets. Four different media were used and culture procedures were evaluated recording the protoplast viability, protoplast division frequency and plating efficiency for each experiment. The embedding of protoplasts in Ca-alginate droplets enhanced both division frequency and plating efficiency for chicory mesophyll cells. Furthermore, this procedure shortened the cycle of plant regeneration from protoplasts, which could be completed in eight weeks. This revised version was published online in June 2006 with corrections to the Cover Date.     

Somatic embryogenesis and plant regeneration from isolated protoplasts of Lavatera thuringiaca

Embryogenic cell suspensions of Lavatera thuringiaca L. were established from leaf petiole and shoot regeneration was achieved when cells were plated on medium without growth regulators. We tested three methods for protoplast culture, isolated from a one-year old embryogenic cell suspension, to determine the best conditions for L. thuringiaca protoplast culture and shoot regeneration. The highest protoplast plating efficiency was obtained with the agaroseembedded method, reaching 30%, while the nursing culture method gave 5% when the protoplasts were plated over Whatman paper No. 2. However, the same nursing culture failed to produce protoplast-derived microcalluses when the protoplasts were plated on a nitrocellulose filter. The liquid thin layer method gave the lowest plating efficiency with only 0.5%. Shoot regeneration from protoplast-derived microcalluses was achieved in two steps; first, globular embryo development was favored in medium low in auxin (2,4-d and BA at 0.01 and 0.05 mg 1^-1, respectively), second, the globular embryos further differentiate into shoots in medium without growth regulators or in medium containing GA₃ (0.5 to 1.0 mg 1^-1).Abbreviations 2,4-d 2,4-dichlorophenoxyacetic acid - BA benzyladenine - GA₃ gibberellic acid - NAA -naphthaleneacetic acid - IBA indole-3-butyric acid     

Plant regeneration from protoplasts of a commercial Asian long-grain javanica rice

A reproducible plant regeneration system has been developed for protoplasts from embryogenic cell suspension cultures of the commercial Asian long-grain javanica rice, Oryza sativa cv. Azucena. Protoplasts were isolated routinely from cell suspensions with yields of 5.5–12.0 × 10⁶ g^-1 fresh weight. A membrane filter nurse-culture method was adopted and was essential to support sustained mitotic division of protoplast-derived cells, leading to cell colony formation. The protoplast plating efficiency was higher when suspension cells of Lolium multiflorum, rather than those of the japonica rice O. sativa L. cv. Taipei 309, were employed as nurse cells. A two-step shoot regeneration procedure, in which protoplast-derived calli were cultured initially on medium semi-solidified with 1% (w/v) agarose followed by culture on medium containing 0.4% (w/v) agarose, induced plant regeneration from protoplast-derived calli. Fifteen percent of protoplast-derived tissues regenerated shoots; tissues not subjected to this treatment failed to develop shoots.     

Plant regeneration from cotyledon protoplasts of Brassica carinata

Protoplasts isolated from cotyledons of Brassica carinata, underwent sustained division when cultured at 5.0 × 10⁴ ml^-1 in modified 8p medium (KM8P) with 1.0% (w/v) Seaplaque agarose. Cell colonies produced callus when agarose droplets, in which the protoplasts were embedded, were transferred to K8 medium with 0.6% (w/v) Sigma Type I or Type VII agarose at day 16, giving a plating efficiency of 1.6%. Seventy percent of the protoplast derived-tissues produced shoot buds after subculture to MS medium containing 3.0% (w/v) sucrose, 1.125 mgl^-1 BAP, 0.035 mgl^-1 GA and 0.6% (w/v) Type I agarose, resulting in shoot formation from 1.1% of the protoplasts originally plated. Protoplast-derived colonies transferred to hormone-free MS medium with 1.0% (w/v) sucrose and 0.6% (w/v) Type I agarose produced roots. The latter gave rise to shoots after excision from the parent callus and culture on MS medium with 3.0% sucrose, 0.225 mgl^-1 BAP, and 0.6% (w/v) Type I agarose. Shoots regenerated directly from protoplast-derived calli, or indirectly from roots, developed prolific root systems when placed on hormone-free MS medium with 1.0% (w/v) sucrose and 0.6% (w/v) Type I agarose.Abbreviations BAP 6-benzylaminopurine - CH casein hydrolysate - 2,4-D 2,4-dichlorophenoxyacetic acid - GA gibberellic acid - K kinetin - NAA -naphthaleneacetic acid - MES 2(N-morpholino)ethanesulphonic acid, 2,iP-6(,-dimethylallyamino) purine - IAA indole-3-acetic acid - Z zeatin - ZR zeatin riboside     

Studies of protoplast culture types and plant regeneration from callusderived protoplasts of Asparagus officinalis L. cv. Lucullus 234

Plating efficiency and colony formation of callus-derived protoplasts of Asparagus officinalis L. cv. Lucullus 234 differed significantly with different protoplast culture media and types of culture. Osmotic conditions and hormone concentrations of liquid media produced the greatest influence on plating efficiency and colony formation in bead culture. Protoplasts grew best in bead culture with a solid modified Kao & Michayluk protoplast culture medium (KM) supplemented with 0.5 mg l^–1 -naphthaleneacetic acid (NAA), 0.5 mg l^–1 2,4-dichlorophenoxyacetic acid (2,4-D), 0.5 mg l^–1 kinetin, and 0.6% agarose (KM6) and a liquid modified KM medium differing from KM6 medium in sugar content, having 0.18 M sucrose and 0.18 M mannitol (A8). An average plating efficiency of 19.1% and colony formation of 15.5% was obtained one week after isolation in bead culture with the KM6 and A8 media. The highest average shoot regeneration of 92.3% was obtained with a Murashige & Skoog medium (MS) containing 0.125 mg l^–1 NAA, 0.125 mg l^–1 2,4-D, 0.25 mg l^–1 6-benzylaminopurine (6-BAP) and 3% sucrose. Plants have been regenerated and transferred to the greenhouse.Abbreviations NAA -naphthaleneacetic acid - 2,4-D 2,4-dichlorophenoxyacetic acid - 6-BAP 6-benzylaminopurine     

Regeneration of leaf mesophyll protoplasts of tomato cultivars (L. esculentum): factors important for efficient protoplast culture and plant regeneration

Conditions were established for efficient plant regeneration from four freshmarket cultivars of Lycopersicon esculentum. In order to increase the yield of viable protoplasts which are able to sustain cell divisions, the donor plants are preconditioned by incubation at 25°C in the dark for 18 hours, followed by a cold treatment at 4°C in the dark for the last 6 hours, prior to protoplast isolation. Browning of the dividing cell colonies can be prevented by culturing protoplasts in 100 l droplets of low-melting agarose, surrounded by liquid medium. Alternatively, protoplasts can be cultured in liquid medium. In both procedures the plating efficiencies and percentage of shoot regeneration are increased, only when dilutions were performed with auxin-free culture medium. Shoot regeneration is obtained by using a two step procedure: initiation of greening of microcalli on a medium containing 0.2 M mannitol and 7.3 mM sucrose, which is followed by shoot development on a mannitol-free medium containing 0.5 M sucrose. In this way, plants can be regenerated within 3 months from the hybrid cultivars Bellina, Abunda, Sonatine and also from the true seedline Moneymaker. The latter one showed the highest regeneration frequency (30%).Abbreviations BAP 6-Benzylamino purine - 2,4-D 2,4-dichlorophenoxy acetic acid - IAA indole acetic acid - MES 2-(N-morpholino)- ethane sulfonic acid - NAA naphthalene acetic acid - PE plating efficiency     

Plant regeneration from protoplasts isolated from embryogenic suspension cultured cells of Cinnamomum camphora L.

An efficient and reproducible protocol is described for the regeneration of Cinnamomum camphora protoplasts isolated from cultured embryogenic suspension cells. Maximum protoplast yield (13.1±2.1×10⁶/g FW) and viability (91.8±3.8%) were achieved using a mixture of 3% (w/v) cellulase Onozuka R10 and 3% (w/v) macerozyme Onozuka R10 in 12.7% (w/v) mannitol solution containing 0.12% (w/v) MES, 0.36% (w/v) CaCl₂·2H₂O, and 0.011% (w/v) NaH₂PO₄·2H₂O. First divisions occurred 7–10 days following culture initiation. The highest division frequency (24.6±2.9%) and plating efficiency (6.88±0.8%) were obtained in liquid medium (MS) supplemented with 30 g l^–1 sucrose, 0.7M glucose, 0.1 mg l^–1 NAA, 1.0 mg l^–1 BA, and 1.0 mg l^–1 GA₃. After somatic embryo induction and then shoot induction, the protoplast-derived embryos produced plantlets at an efficiency of 17.5%. Somatic embryos developed into well-rooted plants on MS medium supplemented with 1.0 mg l^–1 3-indole butyric acid (IBA). Regenerated plants that transferred to soil have normal morphology.     

Plant regeneration from mesophyll protoplasts of Agrobacterium rhizogenes-transformed Astragalus melilotoides

Plant regeneration from mesophyll protoplasts of Agrobacterium rhizogenes-transformed Astragalus melilotoides Pall. was here developed. The protoplasts were isolated directly from the leaves of the hairy root-induced plants. The highest yield of protoplasts was obtained from fully expanded leaves of young plants. Their viability was up to 72 ± 2.3 %. The highest division frequency (32.4 ± 0.13 %) and sustained divisions were obtained in Durand, Potrykus and Donn (DPD) medium supplemented with 2.0 mg dm⁻³ 2,4-dichlorophenoxyacetic acid, 0.2 mg dm⁻³ 6-benzylaminopurine, 0.3 M mannitol, 2 % sucrose and 500 mg dm⁻³ casein hydrolysate at the plating density of 3.0 × 10⁵ cm⁻³. The frequency of shoot differentiation from protocalli reached to 91.75 ± 3.1 %. Opine synthesis and polymerase chain reaction analysis confirmed that T-DNA still existed in the protoplast regenerated plants.     

Protoplast formation and regeneration in <Emphasis Type="Italic">Lactobacillus delbrueckii</Emphasis>

Method for production and regeneration of Lactobacillus delbrueckii protoplasts are described. The protoplasts were obtained by treatment with a mixture of lysozyme and mutanolysin in protoplast buffer at pH 6.5 with different osmotic stabilizers. The protoplasts were regenerated on deMan, Rogosa and Sharpe (MRS) with various osmotic stabilizers. Maximum protoplast formation was obtained in protoplast buffer with sucrose as an osmotic stabilizer using a combination of lysozyme (1 mg/ml) and mutanolysin (10 μg/ml). Maximum protoplast regeneration was obtained on MRS medium with sucrose (0.5 M) as an osmotic stabilizer. The regeneration medium was also applicable to other species of lactobacilli as well. This is, to our knowledge, the first report on protoplast formation and efficient regeneration in case of L. delbrueckii.     

Fertile plant regeneration from barley (Hordeum vulgare L.) protoplasts isolated from primary calluses

Barley (Hordeum vulgare L.) protoplasts were isolated from the immature embryo-derived primary calluses. These protoplasts were cultured with nurse cells, and they then divided to form colonies. After transfer of the colonies to regeneration medium, either green or albino shoots were regenerated from these colonies. A high agarose concentration (2.4% w/v) in the protoplast culture medium promoted protoplast division. The plantlets that developed strong root systems were transferred to the soil. These plants flowered and have set seeds.     

Cryopreservation of shoot primordia cultures of melon using a slow prefreezing procedure

Tissue-cultured shoot primordia of melon (Cucumis melo L. cv. prince melon) were successfully cryopreserved in liquid nitrogen (LN) using a slow prefreezing method. The highest survival and recovery were obtained with the following procedure. Three week-old shoot primordia clumps were dissected into pieces of 2-3 mm of diameter and precultured in standard medium for 3 days. They were directly soaked in CSP1 cryoprotective solution (10%w/v sucrose, 10%w/v dimethylsulfoxide and 5%w/v glycerol) and incubated at room temperature for 30 min. Samples were ice-inoculated at -8 °C and cooled at a rate of between 0.3 and 1 °C min⁻¹ with a programmable freezer to -30 °C for prefreezing. They were then plunged into LN for storage. After rapid thawing in 40 °C water, the cryoprotective solution was slowly diluted 5 fold in a dropwise manner with 3% sucrose and the shoot primordia were transferred onto regeneration medium. Under optimal conditions, more than 80% of cryopreserved shoot primordia were viable and 50 to 80% regenerated shoots after one month of reculture. Cryopreserved shoot primordia could be used both for reproducing a shoot primordia culture and for regenerating plants. This revised version was published online in June 2006 with corrections to the Cover Date.     

草木樨状黄芪甲硫氨酸抗性系的原生质体培养及植株再生

建立了草木樨状黄芪(Astragalus melilotoides Pall．)甲硫氨酸抗性系原生质体再生植株的实验体系。以茎切段诱导的松软愈伤组织为材料,通过酶法分离出大量有活力的原生质体。原生质体经培养持续分裂形成了愈伤组织,并高频率地分化出再生苗。比较了不同培养基、培养方法和培养密度对原生质体分裂和再生的影响。结果表明,原生质体以3×10⁵/mL的植板密度,采用琼脂糖岛法培养在附加1．0mg／L 2,4-二氯苯氧乙酸(2,4-D)、0．5mg／L 6-苄氨基嘌呤(6BA)、500mg／L水解酪蛋白、3％蔗糖、0．3mol／L甘露醇的KM_8p培养基中,可获得最佳效果,其细胞分裂频率达38％左右。原生质体培养后仍然保持对甲硫氨酸的抗性,同时对乙硫氨酸表现交叉抗性。     

Protoplast isolation and regeneration from <Emphasis Type="Italic">Gracilaria changii</Emphasis> (Gracilariales,Rhodophyta)

The tropical agarophyte Gracilaria changii has been much researched and documented by the Algae Research Laboratory, University of Malaya, especially with regards to its potential as a seaweed bioreactor for valuable compounds. Protoplast regeneration of this seaweed was developed following the optimization of protoplast isolation protocol. Effect of the concentration and combination of isolating enzymes, incubation period, temperature, enzyme solution pH, tissue source on the protoplast yields were used to optimize the isolation protocol. The enzyme mixture with 4% w/v cellulase Onozuka R-10, 2% w/v macerozyme R-10 and 1 unit mL^-1 agarase was found to produce the highest yield of protoplast at 28°C and 3 h incubation period. Thallus tips gave higher yields of protoplasts than middle segments. Freshly isolated G. changii protoplasts were cultured in MES medium. Regeneration of protoplast cell walls after 24 h was confirmed by calcofluor white M2R staining under UV fluorescence microscopy. The protoplasts with regenerated cell walls then underwent a series of cell division to produce callus-like cell masses in MES medium. Following this, juvenile plants of G. changii were obtained.     

Protoplasts from <Emphasis Type="Italic">Agrobacterium rhizogenes</Emphasis>-transformed cell line of <Emphasis Type="Italic">Medicago sativa</Emphasis> L. regenerated to hairy roots

Summary Protoplasts were isolated from Agrobacterium rhizogenes A4-transformed cell line of Medicago sativa L. The highest yield of protoplasts (4.2×10⁶ per g fresh weight) was obtained from 12-d-old calluses after being subeultured on fresh medium. The viability of protoplasts reached over 80%. Protoplasts were induced to undergo sustained divisions when cultured in Durand et al. (DPD) medium supplemented with 2 mgl⁻¹ (9.05 μM) 2,4-dichlorophenoxyacetic acid, 0,2mgl⁻¹ (0.93 μM) kinetin, 0.3 M mannitol, 2% (w/v) sucrose, and 500 mgl⁻¹ casein hydrolyzate at a plating density of 1.0×10⁵ per ml. An agarose-beads culture method was appropriate for protoplast division of transformed alfalfa. The division frequency was about 30%. Numerous hairy roots were induced from protocalluses on Murashige and Skoog medium without growth regulators. Paper electrophoresis revealed that all of the regenerated hairy roots tested synthesized the corresponding opines. This protoplast culture system would be valuable for further somatic hybridization in forage legumes.     

Optimum conditions for efficient transformation ofStreptomyces venezuelae protoplasts

Summary Optimum conditions for protoplast regeneration and transformation ofStreptomyces venezuelae ETH 14630 have been established. Protoplasts from mycelium grown to the stationary phase and treated with lysozyme in P medium under mild conditions gave the best regeneration frequency. Transformation of protoplasts with naked DNA was very efficient using either polyethylene glycol of mol. wt. 4000 or 6000, at concentrations of 28.5% or 36% (w/v) respectively. About 10⁵ transformants/g DNA could be isolated using protoplasts derived from cells cultivated to the early exponential growth phase in LB medium containing 0.2%-0.6% glycine and subsequently treated at 30°–32°C with 20 mg lysozyme/ml in P medium for 30 min. Selection of the transformants occurred on MRYE plates containing less than 10⁵ regenerating protoplasts per plate. Higher protoplast densities considerably decreased the regeneration frequency of the transformants.     

Effects of Pluronic F-68 on callus growth and protoplast plating efficiency of Solanum dulcamara

Summary The effects of the non-ionic surfactant, Pluronic F-68, on the growth of callus and protoplasts from Solanum dulcamara L. have been studied. Growth of callus was stimulated by addition of 0.1% (w/v) commercial grade Pluronic to culture medium, whereas lower concentrations (0.01% w/v) had no corresponding effect. In contrast, higher concentrations (1.0% w/v) of Pluronic inhibited callus growth. The mean plating efficiency of protoplasts grown at different densities (15 days after plating) was increased up to 26% following culture with 0.1% (w/v) Pluronic, while 0.01% (w/v) Pluronic was ineffective. Mean protoplast plating efficiency decreased by up to 32% following culture with 1.0% (w/v) Pluronic.     

Isolation,culture and regeneration of protoplasts from birdsfoot trefoil (Lotus corniculatus)

A method was developed for rapid plant regeneration from protoplasts of birdsfoot trefoil (Lotus corniculatus L. cv. Leo). Green cotyledons from in vitro grown seedlings were preplasmolyzed in CPW salts containing 13% mannitol (CPW 13 M) for 1 h prior to the enzyme treatment. The enzyme formula consisted of 2% (w/v) Onozuka Cellulase R-10, 1% (w/v) Macerase and 0.1% (w/v) Pectolyase Y-23 in CPW 13 M. This method produced high yields of viable protoplasts after purification. The procedure is reproducible and takes approximately 2.5 months from protoplast isolation to plantlet establishment in a greenhouse. More than 100 plantlets were grown in soil. Two somaclonal variants, a chimeric plant for chlorophyll production and an albino cell line, have been obtained by this procedure.     

Regeneration of Mesophyll Protoplasts Isolated from Dihaploid Clones of Solanum tuberosum

Protoplasts have been isolated from leaves of shoot cultures of six dihaploid clones of Solanum tuberosum L. (2n = 2x = 24). In the KM medium (Kao and Michayluk 1975), sustained cell divisions were obtained in up to 50% of the plated protoplasts of four clones, whereas only a few divisions occurred in the other two clones. The first mitosis appeared 2–8 days after plating, dependent on the clones. In the clones showing sustained cell divisions, a protoplast titre of about 5 × 10³ per ml turned out to be optimal. The culture conditions for protoplasts of one of the poorly growing clones, clone H² 140, have been improved using modified KM media, plating at a concentration of as high as 5 × 10⁴ cells per ml, and subsequent diluting at intervals 5 days. The dilutions were carried out with media containing 0.25% agar. Up to 60% of the plated protoplasts underwent divisions within 10 days under these conditions. After about 15 days, the regenerants were transferred onto media inducing organogenesis. Shoots and roots were formed on modified media MS (Murashige and Skoog 1962) and B5 (Gamborg et al. 1968). Plants have been regenerated in four of the investigated clones. Countings of chromosomes revealed a satisfactory stability of the karyotype in shoot culture and protoplast regeneration.