Photo-cross-linking of type I collagen gels in the presence of smooth muscle cells: mechanical properties,cell viability,and function

The effectiveness of photomediated cross-linking of type I collagen gels in the presence of rat aortic smooth muscle cells (RASMC) as a method to enhance gel mechanical properties while retaining native collagen triple helical structure and maintaining high cell viability was investigated. Collagen was chemically modified to incorporate an acrylate moiety. Collagen methacrylamide was cast into gels in the presence of a photoinitiator along with RASMC. The gels were cross-linked using visible light irradiation. Neither acrylate modification nor the cross-linking reaction altered collagen triple helical content. The cross-linking reaction, however, moved the denaturation temperature beyond the physiologic range. A twelve-fold increase in shear modulus was observed after cross-linking. Cell viability in the range of 70% (n = 4, p > 0.05) was observed in the photo-cross-linked gels. Moreover the cells were able to contract the cross-linked gel in a manner commensurate with that observed for natural type I collagen. Methacrylate-mediated photo-cross-linking is a facile route to improve mechanical properties of collagen gels in the presence of cells while maintaining high cell viability. This enhances the potential for type I collagen gels to be used as scaffolds for tissue engineering.     

Nonlinear Strain Stiffening Is Not Sufficient to Explain How Far Cells Can?Feel on Fibrous Protein Gels

Recent observations suggest that cells on fibrous extracellular matrix materials sense mechanical signals over much larger distances than they do on linearly elastic synthetic materials. In this work, we systematically investigate the distance fibroblasts can sense a rigid boundary through fibrous gels by quantifying the spread areas of human lung fibroblasts and 3T3 fibroblasts cultured on sloped collagen and fibrin gels. The cell areas gradually decrease as gel thickness increases from 0 to 150 μm, with characteristic sensing distances of >65 μm below fibrin and collagen gels, and spreading affected on gels as thick as 150 μm. These results demonstrate that fibroblasts sense deeper into collagen and fibrin gels than they do into polyacrylamide gels, with the latter exhibiting characteristic sensing distances of <5 μm. We apply finite-element analysis to explore the role of strain stiffening, a characteristic mechanical property of collagen and fibrin that is not observed in polyacrylamide, in facilitating mechanosensing over long distances. Our analysis shows that the effective stiffness of both linear and nonlinear materials sharply increases once the thickness is reduced below 5 μm, with only a slight enhancement in sensitivity to depth for the nonlinear material at very low thickness and high applied traction. Multiscale simulations with a simplified geometry predict changes in fiber alignment deep into the gel and a large increase in effective stiffness with a decrease in substrate thickness that is not predicted by nonlinear elasticity. These results suggest that the observed cell-spreading response to gel thickness is not explained by the nonlinear strain-stiffening behavior of the material alone and is likely due to the fibrous nature of the proteins.     

Collagen fiber alignment does not explain mechanical anisotropy in fibroblast populated collagen gels

Many load-bearing soft tissues exhibit mechanical anisotropy. In order to understand the behavior of natural tissues and to create tissue engineered replacements, quantitative relationships must be developed between the tissue structures and their mechanical behavior. We used a novel collagen gel system to test the hypothesis that collagen fiber alignment is the primary mechanism for the mechanical anisotropy we have reported in structurally anisotropic gels. Loading constraints applied during culture were used to control the structural organization of the collagen fibers of fibroblast populated collagen gels. Gels constrained uniaxially during culture developed fiber alignment and a high degree of mechanical anisotropy, while gels constrained biaxially remained isotropic with randomly distributed collagen fibers. We hypothesized that the mechanical anisotropy that developed in these gels was due primarily to collagen fiber orientation. We tested this hypothesis using two mathematical models that incorporated measured collagen fiber orientations: a structural continuum model that assumes affine fiber kinematics and a network model that allows for nonaffine fiber kinematics. Collagen fiber mechanical properties were determined by fitting biaxial mechanical test data from isotropic collagen gels. The fiber properties of each isotropic gel were then used to predict the biaxial mechanical behavior of paired anisotropic gels. Both models accurately described the isotropic collagen gel behavior. However, the structural continuum model dramatically underestimated the level of mechanical anisotropy in aligned collagen gels despite incorporation of measured fiber orientations; when estimated remodeling-induced changes in collagen fiber length were included, the continuum model slightly overestimated mechanical anisotropy. The network model provided the closest match to experimental data from aligned collagen gels, but still did not fully explain the observed mechanics. Two different modeling approaches showed that the level of collagen fiber alignment in our uniaxially constrained gels cannot explain the high degree of mechanical anisotropy observed in these gels. Our modeling results suggest that remodeling-induced redistribution of collagen fiber lengths, nonaffine fiber kinematics, or some combination of these effects must also be considered in order to explain the dramatic mechanical anisotropy observed in this collagen gel model system.     

The Effect of Substrate Stiffness,Thickness, and Cross-Linking Density on Osteogenic Cell Behavior

Osteogenic cells respond to mechanical changes in their environment by altering their spread area, morphology, and gene expression profile. In particular, the bulk modulus of the substrate, as well as its microstructure and thickness, can substantially alter the local stiffness experienced by the cell. Although bone tissue regeneration strategies involve culture of bone cells on various biomaterial scaffolds, which are often cross-linked to enhance their physical integrity, it is difficult to ascertain and compare the local stiffness experienced by cells cultured on different biomaterials. In this study, we seek to characterize the local stiffness at the cellular level for MC3T3-E1 cells plated on biomaterial substrates of varying modulus, thickness, and cross-linking concentration. Cells were cultured on flat and wedge-shaped gels made from polyacrylamide or cross-linked collagen. The cross-linking density of the collagen gels was varied to investigate the effect of fiber cross-linking in conjunction with substrate thickness. Cell spread area was used as a measure of osteogenic differentiation. Finite element simulations were used to examine the effects of fiber cross-linking and substrate thickness on the resistance of the gel to cellular forces, corresponding to the equivalent shear stiffness for the gel structure in the region directly surrounding the cell. The results of this study show that MC3T3 cells cultured on a soft fibrous substrate attain the same spread cell area as those cultured on a much higher modulus, but nonfibrous substrate. Finite element simulations predict that a dramatic increase in the equivalent shear stiffness of fibrous collagen gels occurs as cross-linking density is increased, with equivalent stiffness also increasing as gel thickness is decreased. These results provide an insight into the response of osteogenic cells to individual substrate parameters and have the potential to inform future bone tissue regeneration strategies that can optimize the equivalent stiffness experienced by a cell.     

Peptide gels of fully-defined composition and mechanics for probing cell-cell and cell-matrix interactions in vitro

Current materials used for in vitro 3D cell culture are often limited by their poor similarity to human tissue, batch-to-batch variability and complexity of composition and manufacture. Here, we present a “blank slate” culture environment based on a self-assembling peptide gel free from matrix motifs. The gel can be customised by incorporating matrix components selected to match the target tissue, with independent control of mechanical properties. Therefore the matrix components are restricted to those specifically added, or those synthesised by encapsulated cells. The flexible 3D culture platform provides full control over biochemical and physical properties, allowing the impact of biochemical composition and tissue mechanics to be separately evaluated in vitro. Here, we demonstrate that the peptide gels support the growth of a range of cells including human induced pluripotent stem cells and human cancer cell lines. Furthermore, we present proof-of-concept that the peptide gels can be used to build disease-relevant models. Controlling the peptide gelator concentration allows peptide gel stiffness to be matched to normal breast (<1 kPa) or breast tumour tissue (>1 kPa), with higher stiffness favouring the viability of breast cancer cells over normal breast cells. In parallel, the peptide gels may be modified with matrix components relevant to human breast, such as collagen I and hyaluronan. The choice and concentration of these additions affect the size, shape and organisation of breast epithelial cell structures formed in co-culture with fibroblasts. This system therefore provides a means of unravelling the individual influences of matrix, mechanical properties and cell-cell interactions in cancer and other diseases.     

Use of three-dimensional collagen gels to study mechanotransduction in t47d breast epithelial cells

Several pathological and disease conditions can alter the mechanical properties of the extracellular matrix (ECM). Conversely, some diseases may arise from changes in the density or rigidity of the ECM. This necessitates the use and development of in vitro models to understand how both biophysical and biochemical signals regulate complex cellular behaviors. T47D breast epithelial cells will differentiate into duct-like tubules when cultured in a floating three-dimensional (3D) collagen gel, but not a 3D collagen gel that is left attached to the culture dish. This paper details several protocols we have developed for analyzing breast cell biology in 3D matrices, including culturing cells in 3D collagen gels, immunostaining cellular structures, and performing biochemical procedures directly from cells embedded in collagen gels.     

Absence of Filamin A Prevents Cells from Responding to Stiffness Gradients on Gels Coated with Collagen but not Fibronectin

Cell types from many tissues respond to changes in substrate stiffness by actively remodeling their cytoskeletons to alter spread area or adhesion strength, and in some cases changing their own stiffness to match that of their substrate. These cell responses to substrate stiffness are linked to substrate-induced changes in the state, localization, and amount of numerous proteins, but detailed evidence for the requirement of specific proteins in these distinct forms of mechanical response are scarce. Here we use microfluidics techniques to produce gels with a gradient of stiffness to show the essential function of filamin A in cell responses to mechanical stimuli and dissociate cell spreading and stiffening by contrasting responses of a pair of human melanoma-derived cell lines that differ in expression of this actin cross-linking protein. M2 melanoma cells null for filamin A do not alter their adherent area in response to increased substrate stiffness when they link to the substrate only through collagen receptors, but change adherent area normally when bound through fibronectin receptors. In contrast, filamin A-replete A7 cells change adherent area on both substrates and respond more strongly to collagen I-coated gels than to fibronectin-coated gels. Strikingly, A7 cells alter their stiffness, as measured by atomic force microscopy, to match the elastic modulus of the substrate immediately adjacent to them on the gradient. M2 cells, in contrast, maintain a constant stiffness on all substrates that is as low as that of A7 cells on the softest gels examined (1000 Pa). Comparison of cell spreading and cell stiffening on the same gradient substrates shows that cell spreading is uncoupled from stiffening. At saturating collagen and fibronectin concentrations, adhesion of M2 cells is reduced compared to that of A7 cells to an extent approximately equal to the difference in adherent area. Filamin A appears to be essential for cell stiffening on collagen, but not for cell spreading on fibronectin. These results have implications for different models of cell protrusion and adhesion and identify a key role for filamin A in altering cellular stiffness that cannot be compensated for by other actin cross-linkers in vivo.     

Tumor Stiffness Is Unrelated to Myosin Light Chain Phosphorylation in Cancer Cells

Many tumors are stiffer than their surrounding tissue. This increase in stiffness has been attributed, in part, to a Rho-dependent elevation of myosin II light chain phosphorylation. To characterize this mechanism further, we studied myosin light chain kinase (MLCK), the main enzyme that phosphorylates myosin II light chains. We anticipated that increases in MLCK expression and activity would contribute to the increased stiffness of cancer cells. However, we find that MLCK mRNA and protein levels are substantially less in cancer cells and tissues than in normal cells. Consistent with this observation, cancer cells contract 3D collagen matrices much more slowly than normal cells. Interestingly, inhibiting MLCK or Rho kinase did not affect the 3D gel contractions while blebbistatin partially and cytochalasin D maximally inhibited contractions. Live cell imaging of cells in collagen gels showed that cytochalasin D inhibited filopodia-like projections that formed between cells while a MLCK inhibitor had no effect on these projections. These data suggest that myosin II phosphorylation is dispensable in regulating the mechanical properties of tumors.     

Adaptive Changes in Cardiac Fibroblast Morphology and Collagen Organization as a Result of Mechanical Environment

There is a growing body of work in the literature that demonstrates the significant differences between 2D versus 3D environments in cell morphologies, spatial organization, cell-ECM interactions, and cell signaling. The 3D environments are generally considered more realistic tissue models both because they offer cells a surrounding environment rather than just a planar surface with which to interact, and because they provide the potential for more diverse mechanical environments. Many studies have examined cellular-mediated contraction of 3D matrices; however, because the 3D environment is much more complex and the scale more difficult to study, little is known regarding how mechanical environment, cell and collagen architecture, and collagen remodeling are linked. In the current work, we examine the spatial arrangement of neonatal cardiac fibroblasts and the associated collagen organization in constrained and unconstrained collagen gels over a 24 h period. Collagen gels that are constrained by their physical attachment to a mold and similar gels, which have been detached (unconstrained) from the mold and subsequently contract, offer two simple mechanical models by which the mechanisms of tissue homeostasis and wound repair might be examined. Our observations suggest the presence of two mechanical regimes in the unconstrained gels: an outer ring where cells orient circumferentially and local collagen aligns with the elongated cells; and a central region where unaligned stellate/bipolar cells are radially surrounded by collagen, similar to that seen throughout constrained gels. The evolving organization of cell alignment and surrounding collagen organization suggests that cellular response may be due to the cellular perception of the apparent stiffness of local physical environment.     

The behaviour of BHK cells and neutrophil leukocytes on collagen gels of defined mechanical strength

This study demonstrates how the mechanical strength of a series of collagen/composite gels can be measured using a penetrometer. It was found that the presence of fibrin in collagen gels resulted in increased gel strength. Similarly hyaluronic acid was found to increase the strength of collagen gels. Addition of heparin weakened collagen gels as did chondroitin-6-sulphate. Neutrophil migration into collagen gels was found to be inversely proportional to gel strength. Fibrin and hyaluronic acid containing gels inhibited neutrophil migration while the presence of heparin and chondroitin sulphate increased neutrophil migration. BHK gel contraction experiments demonstrated how the presence of fibrin prevents gel contraction. Despite increasing gel strength the presence of hyaluronic acid appeared to have no effect on BHK contraction of collagen gels. Similarly the presence of heparin or chondroitin sulphate had no effect on gel contraction by BHK cells.     

Influence of substrate stiffness on circulating progenitor cell fate

In situ vascular tissue engineering (TE) aims at regenerating vessels using implanted synthetic scaffolds. An envisioned strategy is to capture and differentiate progenitor cells from the bloodstream into the porous scaffold to initiate tissue formation. Among these cells are the endothelial colonies forming cells (ECFCs) that can differentiate into endothelial cells and transdifferentiate into smooth muscle cells under biochemical stimulation. The influence of mechanical stimulation is unknown, but relevant for in situ vascular TE because the cells perceive a change in mechanical environment when captured inside the scaffold, where they are shielded from blood flow induced shear stresses. Here we investigate the effects of substrate stiffness as one of the environmental mechanical cues to control ECFC fate within scaffolds. ECFCs were seeded on soft (3.58±0.90 kPa), intermediate (21.59±2.91 kPa), and stiff (93.75±18.36 kPa) fibronectin-coated polyacrylamide gels, as well as on glass controls, and compared to peripheral blood mononuclear cells (PBMC). Cell behavior was analyzed in terms of adhesion (vinculin staining), proliferation (BrdU), phenotype (CD31, αSMA staining, and flow cytometry), and collagen production (col I, III, and IV). While ECFCs adhesion and proliferation increased with substrate stiffness, no change in phenotype was observed. The cells produced no collagen type I, but abundant amounts of collagen type III and IV, albeit in a stiffness-dependent organization. PBMCs did not adhere to the gels, but they did adhere to glass, where they expressed CD31 and collagen type III. Addition mechanical cues, such as cyclic strains, should be studied to further investigate the effect of the mechanical environment on captured circulating cells for in situ TE purposes.     

Layer-by-layer Collagen Deposition in Microfluidic Devices for Microtissue Stabilization

Although microfluidics provides exquisite control of the cellular microenvironment, culturing cells within microfluidic devices can be challenging. 3D culture of cells in collagen type I gels helps to stabilize cell morphology and function, which is necessary for creating microfluidic tissue models in microdevices. Translating traditional 3D culture techniques for tissue culture plates to microfluidic devices is often difficult because of the limited channel dimensions. In this method, we describe a technique for modifying native type I collagen to generate polycationic and polyanionic collagen solutions that can be used with layer-by-layer deposition to create ultrathin collagen assemblies on top of cells cultured in microfluidic devices. These thin collagen layers stabilize cell morphology and function, as shown using primary hepatocytes as an example cell, allowing for the long term culture of microtissues in microfluidic devices.     

Biochemical and mechanical extracellular matrix properties dictate mammary epithelial cell motility and assembly

Biochemical and mechanical cues of the extracellular matrix have been shown to play important roles in cell-matrix and cell-cell interactions. We have experimentally tested the combined influence of these cues to better understand cell motility, force generation, cell-cell interaction, and assembly in an in vitro breast cancer model. MCF-10A non-tumorigenic mammary epithelial cells were observed on surfaces with varying fibronectin ligand concentration and polyacrylamide gel rigidity. Our data show that cell velocity is biphasic in both matrix rigidity and adhesiveness. The maximum cell migration velocity occurs only at specific combination of substrate stiffness and ligand density. We found cell-cell interactions reduce migration velocity. However, the traction forces cells exert onto the substrate increase linearly with both cues, with cells in pairs exerting higher maximum tractions observed over single cells. A relationship between force and motility shows a maximum in single cell velocity not observed in cell pairs. Cell-cell adhesion becomes strongly favored on softer gels with elasticity ≤ 1250 Pascals (Pa), implying the existence of a compliance threshold that promotes cell-cell over cell-matrix adhesion. Finally on gels with stiffness similar to pre-malignant breast tissue, 400 Pa, cells undergo multicellular assembly and division into 3D spherical aggregates on a 2D surface.     

Platelet-Derived Growth Factors-BB and Fibroblast Growth Factors-Base Induced Proliferation of Schwann Cells in a 3D Environment

The proliferation of neonatal Schwann cells (SCs) in response to mitogenic agents has been well analyzed in vitro (mono-layer-culture method, 2D environment), but not in vivo (3D environment). To assess the mitogenic effect of platelet-derived growth factors-BB (PDGF-BB), Fibroblast Growth Factors-base (bFGF), and their combinations for SCs in collagen gel (three-dimensional, 3D environment), we have developed an integrated microfluidic device on which can reproducibly measure the proliferation from small number of cells (1–100). The rat SCs were cultured for 4 week at the different concentrations of growth factors generated by concentration gradient generator. In the collagen gel culture, almost all of the cells in colonies presented a round cell morphology and maintained their round morphology by the 4th week. The results showed that PDGF-BB and bFGF are all capable of moderately stimulating SCs growth and every group reached the peak in the growth curve at 3 weeks. Moreover, the proliferation test using the conventional method was performed simultaneously and revealed similar results. The biggest difference between 2D and 3D was that cells decrease more remarkable in 3D than that in 2D at 4 weeks. And at 2 and 3 weeks, the growth rate in the collagen gel with 7.14/2.86 and 8.57/1.43 ng/mL groups was higher than that in the mono-layer culture. Our results showed that PDGF-BB and bFGF are capable of moderately stimulating neonatal SCs growth, respectively and synergistically, and the microfluidic technique is highly controllable, contamination free, fully automatic, and inexpensive.     

The development of structural and mechanical anisotropy in fibroblast populated collagen gels

An in vitro model system was developed to study structure-function relationships and the development of structural and mechanical anisotropy in collagenous tissues. Fibroblast-populated collagen gels were constrained either biaxially or uniaxially. Gel remodeling, biaxial mechanical properties, and collagen orientation were determined after 72 h of culture. Collagen gels contracted spontaneously in the unconstrained direction, uniaxial mechanical constraints produced structural anisotropy, and this structural anisotropy was associated with mechanical anisotropy. Cardiac and tendon fibroblasts were compared to test the hypothesis that tendon fibroblasts should generate greater anisotropy in vitro. However, no differences were seen in either structure or mechanics of collagen gels populated with these two cell types, or between fibroblast populated gels and acellular gels. This study demonstrates our ability to control and measure the development of structural and mechanical anisotropy due to imposed mechanical constraints in a fibroblast-populated collagen gel model system. While imposed constraints were required for the development of anisotropy in this system, active remodeling of the gel by fibroblasts was not. This model system will provide a basis for investigating structure-function relationships in engineered constructs and for studying mechanisms underlying the development of anisotropy in collagenous tissues.     

Promotion of regeneration and axon growth following injury in an invertebrate nervous system by the use of three-dimensional collagen gels.

We describe the application of three-dimensional collagen matrices to the study of nerve cord repair in the leech. Our experiments show that ganglia and connectives of the leech ventral nerve cord can be maintained for up to four weeks embedded in 3D gels constructed from mammalian type I collagen. Severed nerve cords embedded in the collagen gel reliably repaired within a few days of culture. The gel was penetrable by cells emigrating from the cut ends of nerves and connectives, and we consistently saw regenerative outgrowth of severed peripheral and central axons into the gel matrix. Thus, 3D gels provide an in vitro system in which we can reliably obtain repair of severed nerve cords in the dish, and visualize cell behaviour underlying regenerative growth at the damage site: and which offers the possibility of manipulating the regenerating cells and their extracellular environment in various ways at stages during repair. Using this system it should be possible to test the effect on the repair process of altering expression of selected genes in identified nerve cells.     

Effects of static or dynamic mechanical stresses on osteoblast phenotype expression in three‐dimensional contractile collagen gels

Studies performed at tissular (three‐dimensional, 3‐D) or cellular (two‐dimensional, 2‐D) levels showed that the loading pattern plays a crucial role in the osteoblastic physiology. In this study, we attempted to investigate the response of a 3‐D osteoblastic culture submitted to either no external stress or static or dynamic stresses. Rat osteosarcoma cells (ROS 17/2.8) were embedded within collagen type I lattices and studied for 3 weeks. Entrapment and proliferation of cells within the hydrated collagen gel resulted in the generation of contractile forces, which led to contraction of the collagen gel. We used this ability to evaluate the influence of three modes of mechanical stresses on the cell proliferation and differentiation: (1) the freely retracted gels (FRG) were floating in the medium, (2) the tense gels (TG) were stretched statically and isometrically, with contraction prevented in the longitudinal axis, and (3) the dynamic gels (DG) were floating gels submitted to periodic stresses (50 or 25 rpm frequency). Gels showed maximum contraction at day 12 in 50 rpm DG, followed by 25 rpm DG, then FRG (88%, 81%, 70%, respectively) and at day 16 in TG (33%). The proliferation rate was greater in TG than in FRG (+52%) but remained low in both DGs. Gel dimensions were related to the collagen concentration and on a minor extent to cell number. Cells in DG appeared rounder and larger than in other conditions. In TG, cells were elongated and oriented primarily along the tension axis. Scanning electron microscopy (SEM) showed that tension exerted by cells in TG led to reorientation of collagen fibers which, in turn, determined the spatial orientation and morphology of the cells. Transmission electron microscopy (TEM) performed at maximum proliferation showed a vast majority of cells with a distended well‐developed RER filled with granular material and numerous mitochondria. Alkaline phosphatase activity peaked close to the proliferation peak in FRG, whereas in TG, a biphasic curve was observed with a small peak at day 4 and the main peak at day 16. In DG, this activity was lower than in the two other conditions. A similar time course was observed for alkaline phosphatase gene expression as assessed by Northern blots. Regardless of the conditions, osteocalcin level showed a triphasic pattern: a first increase at day 2, followed by a decrease from day 4 to 14, and a second increase above initial values at day 18. Microanalysis‐x indicated that mineralization occurred after 14 days and TEM showed crystals within the matrix. We showed that static and dynamic mechanical stresses, in concert with 3‐D collagen matrices, played a significant role on the phenotypic modulation of osteoblast‐like cells. This experimental model provided a tool to investigate the significance and the mechanisms of mechanical activity of the 3‐D cultured osteoblast‐like cells. J. Cell. Biochem. 76:217–230, 1999. © 1999 Wiley‐Liss, Inc.     

Cooperative Roles of SDF-1α and EGF Gradients on Tumor Cell Migration Revealed by a Robust 3D Microfluidic Model

Chemokine-mediated directed tumor cell migration within a three dimensional (3D) matrix, or chemoinvasion, is an important early step in cancer metastasis. Despite its clinical importance, it is largely unknown how cytokine and growth factor gradients within the tumor microenvironment regulate chemoinvasion. We studied tumor cell chemoinvasion in well-defined and stable chemical gradients using a robust 3D microfluidic model. We used CXCL12 (also known as SDF-1α) and epidermal growth factor (EGF), two well-known extracellular signaling molecules that co-exist in the tumor microenvironment (e.g. lymph nodes or intravasation sites), and a malignant breast tumor cell line, MDA-MB-231, embedded in type I collagen. When subjected to SDF-1α gradients alone, MDA-MB-231 cells migrated up the gradient, and the measured chemosensitivity (defined as the average cell velocity along the direction of the gradient) followed the ligand – receptor (SDF-1α – CXCR4) binding kinetics. On the other hand, when subjected to EGF gradients alone, tumor cells increased their overall motility, but without statistically significant chemotactic (directed) migration, in contrast to previous reports using 2D chemotaxis assays. Interestingly, we found that the chemoinvasive behavior to SDF-1α gradients was abrogated or even reversed in the presence of uniform concentrations of EGF; however, the presence of SDF-1α and EGF together modulated tumor cell motility cooperatively. These findings demonstrate the capabilities of our microfluidic model in re-creating complex microenvironments for cells, and the importance of cooperative roles of multiple cytokine and growth factor gradients in regulating cell migration in 3D environments.     

The effects of a collagenous extracellular matrix on fibroblast membrane organization : An ESR spin label study

Human skin fibroblasts, both in suspension and cultured within a three-dimensional collagen matrix have been examined by electron spin resonance ESR using the probe 5-doxyl stearic acid. The order of the plasma membrane was found to be strongly influenced by the collagen matrix, being greater for cells within the collagen gel than in suspension. The collagen cultures used in this study were either left attached to the walls of the plastic culture dish (‘attached’ gels) or dislodged and allowed to float freely in the culture medium (‘floating’ gels). Membrane order increased with time in attached gels, reaching a steady value after 2–3 h. A further increase in order was observed when floating gels were prepared 24 h later. Cell morphology within the collagen gel culture was observed to vary considerably, with time and mode of culture. Increased order, over that observed in suspension, was also found for cells attached to other substrata. The data indicate that the increase in membrane order observed in cells embedded within a three-dimensional collagen gel matrix compared with cells in suspension does not correlate with a particular cell morphology in the gel, but rather appears to result from the establishment of adhesive interactions with the surrounding collagen fibres.