Adsorption of lipoproteins with the aid of carboxymethylchitosan mircrospheres crosslinked with poly(ethylene glycol) bisglycidyl ether

Carboxymethylchitosan microspheres crosslinked with poly(ethylene glycol) bisglycidyl ether were prepared and then tested as an adsorbent for selective removal of low-density lipoprotein (LDL) in human plasma. The microspheres were formed by a method of electrostatic instillation and crosslinked with poly(ethylene glycol) bisglycidyl ether. FTIR spectral analyses and X-ray photoelectron spectroscopy revealed that carboxymethylchitosan was crosslinked through amino groups to poly(ethylene glycol) bisglycidyl ether. The plasma lipoprotein sorption tests showed that the adsorption properties of the crosslinked microspheres for LDL were dependent on the concentrations of carboxymethylchitosan and poly(ethylene glycol) bisglycidyl ether. When the concentrations of carboxymethylchitosan and poly(ethylene glycol) bisglycidyl ether were 3.5% and 6%, respectively, 40% LDL and lower than 10% high density lipoprotein in plasma could be removed and the adsorption could be reach an equilibrium in 30 min.     

Enzymatic grafting of a natural product onto chitosan to confer water solubility under basic conditions

Chitosan is a natural biopolymer whose rich amine functionality confers water solubility at low pH. At higher pH's (greater than 6. 5), the amines are deprotonated and chitosan is insoluble. To attain water solubility under basic conditions we enzymatically grafted the hydrophilic compound chlorogenic acid onto chitosan. Despite its name, chlorogenic acid is a nonchlorinated phenolic natural product that has carboxylic acid and hydroxyl functionality. The enzyme in this study was tyrosinase, which converts a wide range of phenolic substrates into electrophilic o-quinones. The o-quinones are freely diffusible and can undergo reaction with the nucleophilic amino groups of chitosan. Using slightly acidic conditions (pH = 6), it was possible to modify chitosan under homogeneous conditions. When the amount of chlorogenic acid used in the modification reaction exceeded 30% relative to chitosan's amino groups, the modified chitosan was observed to be soluble under both acidic and basic conditions, and to have a pH window of insolubility at near neutral pH. 1H NMR spectra confirmed that chitosan was chemically modified, although the degree of modification was low. Copyright 1999 John Wiley & Sons, Inc.     

Influence of molecular weight and pH on adsorption of chitosan at the surface of large and giant vesicles

This paper describes the mechanisms of adsorption of chitosan, a positively charged polyelectrolyte, on the DOPC lipid membrane of large and giant unilamellar vesicles (respectively, LUVs and GUVs). We observe that the variation of the zeta potential of LUVs as a function of chitosan concentration is independent on the chitosan molecular weight (Mw). This result is interpreted in terms of electrostatic interactions, which induce a flat adsorption of the chitosan on the surface of the membrane. The role of electrostatic interactions is further studied by observing the variation of the zeta potential as a function of the chitosan concentration for two different charge densities tuned by the pH. Results show a stronger chitosan-membrane affinity at pH 6 (lipids are negatively charged, and 40% chitosan amino groups are protonated) than at pH 3.4 (100% of protonated amino groups but zwitterionic lipids are positively charged) which confirms that adsorption is of electrostatic origin. Then, we investigate the stability of decorated LUVs and GUVs in a large range of pH (6.0 < pH < 12.0) in order to complete a previous study made in acidic conditions [Quemeneur et al. Biomacromolecules 2007, 8, 2512-2519]. A comparative study of the variation of the zeta potential as a function of the pH (2.0 < pH < 12.0) reveals a difference in behavior between naked and chitosan-decorated LUVs. This result is further confirmed by a comparative observation by optical microscopy of naked and chitosan-decorated GUVs in basic conditions (6.0 < pH < 12.0): at pH > 10.0, in the absence of chitosan, the vesicles present complex shapes, contrary to the chitosan-decorated vesicles which remain spherical, confirming thus that chitosan remains adsorbed on vesicles in basic conditions up to pH = 12.0. These results, in addition with our previous data, show that the chitosan-decorated vesicles are stable over a very broad range of pH (2.0 < pH < 12.0), which holds promise for their in vivo applications. Finally, the quantification of the chitosan adsorption on a LUV membrane is performed by zeta potential and fluorescence measurements. The fraction of membrane surface covered by chitosan is estimated to be lower than 40 %, which corresponds to the formation of a flat layer of chitosan on the membrane surface on an electrostatic basis.     

Enzymatic grafting of carboxyl groups on to chitosan--to confer on chitosan the property of a cationic dye adsorbent

Chitosan (CTS) is a good adsorbent for dyes but lacks the ability to adsorb cationic dyes. In this study, chitosan was modified to possess the ability to adsorb cationic dyes from water. Four kinds of phenol derivatives: 4-hydroxybenzoic acid (BA), 3,4-dihydroxybenzoic acid (DBA), 3,4-dihydroxyphenyl-acetic acid (PA), hydrocaffeic acid (CA) were used individually as substrates of tyrosinase to graft onto chitosan. FTIR analysis provided supporting evidence of phenol derivatives being grafted. The grafting amounts of these phenol derivatives onto chitosan were examined by the adsorption of an anionic dye (amaranth) and reached a plateau value. The final contents of carboxyl groups in chitosan (mmol carboxyl groups per kg chitosan) were measured as 46.36 for BA, 70.32 for DBA, 106.44 for PA, and 113.15 for CA. These modified chitosans were used in experiments on uptake of the cationic dyes crystal violet (CV) and bismarck brown Y (BB) by a batch adsorption technique at pH 7 for CV and at pH 9 for BB and 30 degrees C. Langmuir type adsorption was found, and the maximum adsorption capacities for both dyes were increased with the following order CTS-CA>CTS-PA>CTS-DBA>CTS-BA.     

Adsorption of gold(III), platinum(IV) and palladium(II) onto glycine modified crosslinked chitosan resin

The adsorption of Au(III), Pt(IV) and Pd(II) onto glycine modified crosslinked chitosan resin (GMCCR) has been investigated. The parameters studied include the effects of pH, contact time, ionic strength and the initial metal ion concentrations by batch method. The optimal pH for the adsorption of Au(III), Pt(IV) and Pd(II) was found to range from 1.0 to 4.0 and the maximum uptake was obtained at pH 2.0 for Au(III), Pt(IV) and Pd(II). The results obtained from equilibrium adsorption studies are fitted in various adsorption models such as Langmuir and Freundlich and the model parameters have been evaluated. The maximum adsorption capacity of GMCCR for Au(III), Pt(IV) and Pd(II) was found to be 169.98, 122.47 and 120.39mg/g, respectively. The kinetic data was tested using pseudo-first-order and pseudo-second-order kinetic models and an intraparticle diffusion model. The correlation results suggested that the pseudo-second-order model was the best choice among all the kinetic models to describe the adsorption behavior of Au(III), Pt(IV) and Pd(II) onto GMCCR. Various concentrations of HCl, thiourea and thiourea-HCl solutions were used to desorb the adsorbed precious metal ions from GMCCR. It was found that 0.7M thiourea-2M HCl solution provided effectiveness of the desorption of Au(III), Pt(IV) and Pd(II) from GMCCR. The modification of glycine on crosslinked chitosan resin (CCR) was studied by Fourier transform infrared spectrometry (FTIR) and scanning electron microscopy (SEM).     

Substituent distribution on O,N-carboxymethylchitosans by 1H and 13C n.m.r.

The use of the n.m.r. method in the investigation of chitosan carboxymethylation was evaluated. It seems to be the most effective technique to determine concurrently the degree and the position of substitution of the carboxymethylated chitosan derivatives. The 13C-n.m.r., by the DEPT method, 1H-1H and 1H-13C-n.m.r. correlations give much valuable information from the chemical shifts of the complex carboxymethylchitosan spectra. The relative reactivity of the functional groups of chitosan towards carboxymethylation was also determined assuming a higher reactivity of the C-6 position.     

Modification of cellulose films by adsorption of CMC and chitosan for controlled attachment of biomolecules

The adsorption of human immunoglobulin G (hIgG) and bovine serum albumin (BSA) on cellulose supports were investigated. The dynamics and extent of related adsorption processes were monitored by surface plasmon resonance (SPR) and quartz crystal microbalance with dissipation monitoring (QCM-D). Amine groups were installed on the cellulose substrate by adsorption of chitosan from aqueous solution, which allowed for hIgG to physisorb from acid media and produced a functionalized substrate with high surface density (10 mg/m(2)). hIgG adsorption from neutral and alkaline conditions was found to yield lower adsorbed amounts. The installation of the carboxyl groups on cellulose substrate via carboxymethylated cellulose (CMC) adsorption from aqueous solution enhanced the physisorption of hIgG at acidic (adsorbed amount of 5.6 mg/m(2)) and neutral conditions. hIgG adsorption from alkaline conditions reduced the surface density. BSA was used to examine protein attachment on cellulose after modification with chitosan or carboxymethyl cellulose. At the isoelectric point of BSA (pI 5), both of the surface modifications enhanced the adsorption of this protein when compared to that on unmodified cellulose (a 2-fold increase from 1.7 to 3.5 mg/m(2)). At pH 4, the electrostatic interactions favored the adsorption of BSA on the CMC-modified cellulose, revealing the affinity of the system and the possibility of tailoring biomolecule binding by choice of the surface modifier and pH of the medium.     

Investigating the parameters affecting the adsorption of amino acids onto AgCl nanoparticles with different surface charges

In this paper, adsorption behaviors of typical neutral (alanine), acidic (glutamic acid) and basic (lysine) amino acids onto the surfaces of neutral as well as positively and negatively charged silver chloride nanoparticles were examined. Silver chloride nanoparticles with different charges and different water content were synthesized by reverse micelle method. The adsorptions of the above mentioned amino acids onto the surfaces of differently charged silver chloride nanoparticles were found to depend strongly on various parameters including pH of the aqueous solution, type of amino acid, water to surfactant mole ratio, and type of charges on the surfaces of silver chloride nanoparticles. It was found that the interaction of –NH₃ ⁺ groups of the amino acids with silver ion could be a driving force for adsorption of amino acids. Alanine and Glutamic acid showed almost similar trend for being adsorbed on the surface of silver chloride nanoparticles. Electrostatic interaction, hydrophobicity of both nanoparticle and amino acid, complex formation between amine group and silver ion, interaction between protonated amine and silver ion as well as the number of nanoparticles per unit volume of solution were considered for interpreting the observed results.     

海南热带雨林土壤中胡敏酸对Pb2+、Cu2+的吸附解吸特性研究

重金属元素在土壤-溶液界面的吸附反应深刻地影响重金属行为及其生态风险。以热带次生雨林土壤中提取的胡敏酸为材料, 采用傅立叶红外光谱、扫描电镜等技术对胡敏酸进行了表征, 通过批量吸附实验研究了胡敏酸对铅、铜的吸附特性, 通过连续解吸方法研究了在不同浓度下饱和吸附的胡敏酸对重金属吸附的形成过程。结果表明, 胡敏酸的腐殖化系数较高, 阳离子交换量为52.84 mmol·g-1, 表面含有羧基和酚羟基官能团。胡敏酸对铜的吸附符合准二级动力学模型, 对铅的吸附符合准一级动力学方程; Langmuir 模型能够更好地描述单一和复合污染条件下胡敏酸对Pb2+的等温吸附行为, Freundlich 模型能够更好的描述单一和复合污染条件下胡敏酸对Cu2+的等温吸附行为。通过连续解吸实验发现, 胡敏酸对铅的吸附过程中4种结合方式的先后饱和顺序为: 物理吸附、络合、离子交换和氢键结合。胡敏酸对铜的吸附过程中4种结合方式的先后饱和顺序为: 络合、氢键结合、离子交换和物理吸附。     

Adsorption of bovin serum albumin (BSA) onto the magnetic chitosan nanoparticles prepared by a microemulsion system

The adsorption characteristics of BSA onto the magnetic chitosan nanoparticles have been investigated in this paper. The magnetic chitosan nanoparticles were prepared by adding the basic precipitant of NaOH solution into a W/O microemulsion system. The morphology of magnetic chitosan nanoparticles was observed by transmission electron microscope (TEM). It was found that the diameter of magnetic chitosan nanoparticles was from 10nm to 20 nm, and the nanoparticles suspending in the aqueous solution could easily aggregate by a magnet, which suggested that the nanoparticles had good magnetic characteristics. The BSA adsorption experiment indicated that when pH of BSA solution was equal to 4, the maximum adsorption loading reached 110 mg/g. Through measuring the zeta potential of BSA solution and the magnetic nanoparticles, it was found that under this situation the surface of BSA took the negative charge, but the magnetic nanoparticles took the positive charge. Due to the small diameter, the adsorption equilibrium of BSA onto the nanoparticles reached very quickly within 10 min. The adsorption equilibrium of BSA onto the magnetic chitosan nanoparticles fitted well with the Freundlich model. The experimental results showed that the magnetic chitosan nanoparticles have potential to be used for the quick pretreatment in the protein analysis process.     

Surface modification of chitosan films. Effects of hydrophobicity on protein adsorption

The surface of chitosan films was modified using acid chloride and acid anhydrides. Chemical composition at the film surface was analyzed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). ATR-FTIR data verified that the substitution took place at the amino groups of chitosan, thus forming amide linkages, and the modification proceeded to the depth at least 1 microm. Choices of molecules substituted at the amino groups of the glucosamine units did affect the hydrophobicity of the film surface, as indicated by air-water contact angle analysis. The surface became more hydrophobic than that of non-modified film when a stearoyl group (C(17)H(35)CO-) was attached to the films. The reaction of chitosan films with succinic anhydride or phthalic anhydride, however, produced more hydrophilic films. Selected modified films were subjected to protein adsorption study. The amount of protein adsorbed, determined by bicinchoninic acid (BCA) assay, related to the types of attached molecules. The improved surface hydrophobicity affected by the stearoyl groups promoted protein adsorption. In contrast, selective adsorption behavior was observed in the case of the chitosan films modified with anhydride derivatives. Lysozyme adsorption was enhanced by H-bonding and charge attraction with the hydrophilic surface. While the amount of albumin adsorbed was decreased possibly due to negative charges that gave rise to repulsion between the modified surface and albumin. This study has demonstrated that it is conceivable to fine-tune surface properties which influence its response to bio-macromolecules by heterogeneous chemical modification.     

Chitosan Interactions with Metal Ions and Dyes: Dissolved-state vs. Solid-state Application

Summary Chitosan is an amino-polysaccharide with highly efficient properties for the binding of metal ions and anionic dyes. Uptake may occur through chelation on free amino functions (at near-neutral pH) or by electrostatic attraction on protonated amino groups (in acidic solutions). The polymer is soluble in acidic solutions and its binding properties can be used in both solid form (sorption) and liquid form (ultrafiltration coupled with chelation, coagulation–flocculation). These properties have been used for the recovery of mercury from dilute solutions at initial pH 5 (which reveals the most efficient pH in the range pH 4–6) and for the recovery of Reactive Black 5 (RB5, anionic dye) at pH 3. While in the case of mercury binding saturation of the biopolymer is only slightly higher when chitosan is used in the liquid form compared to solid-state adsorption, in the case of the coagulation–flocculation of RB5 (using the liquid-form of chitosan) the saturation of the polymer (calculated on the basis of molar ratio of dye vs. amino groups of the polymer) is reached at a significantly greater value than when the polymer is used for the solid-state binding of the dye. There is a much more efficient use of amino groups when chitosan is used in the liquid-form due to a better availability of amino groups (less hydrogen bonds between the chains of the polymer) and to a better accessibility to internal sorption sites (lower diffusion control).     

Adsorption properties of gold onto a chitosan derivative

In order to find a material which can be used for the recovery of Au(III), a chitosan derivative was synthesized by carboxymethylation and grafting sulfur groups onto cross-linked chitosan backbone. Adsorption studies were carried out at different pH values to optimize the pH condition. Batch method was conducted to study the effects of parameters such as reaction time, initial metal concentration and temperature on Au(III) sorption. The maximum adsorption affinity for Au(III) was found to be 8.32mmol/g at pH 4.0, 25°C. The results of kinetic study showed that the adsorption reaction followed the pseudo second order model. The derivative showed high adsorption ability and reusability toward Au(III). All results suggested that the chitosan derivative had potential to be utilized in the recovery of Au(III) from aqueous medium.     

Effect of oppositely charged polymer and dissolution medium on swelling, erosion, and drug release from chitosan matrices

The purpose of this research was to investigate the potential use of anionick-carrageenan and nonionic hydroxypropyl-methylcellulose (HPMC, K4) to improve the matrix integrity of directly compressed chitosan tablets containing naproxen sodium, an anionic drug. The influence of buffer pH and drug:polymer ratio on the water uptake, matrix erosion, and drug release were studied. The rapid release of naproxen sodium was seen from matrices containing 100% chitosan due to loss in the matrix cohesiveness; whereas, it was relatively slow for matrices containing optimum concentration ofk-carrageenan. In-situ interaction between oppositely charged moieties resulted in the formation of polyelectrolyte complexes with stoichiometric charge ratios of unity. Fourier transform in frared (FTIR) spectroscopy and powder x-ray diffraction (PXRD) data confirmed the importance of ionic bonds in polyelectrolyte complexation. The ionic interactions between polymers were absent in matrices containing HPMC and the integrity of tablets was improved owing to the presence of viscous gel barrier. The reasons for retarded release of naproxen sodium from the chitosan matrices at different pH include poor aqueous solubility of drug, the formation of a rate-limiting polymer gel barrier along the periphery of matrices, the interaction of naproxen sodium with protonated amino, groups of chitosan, and the interaction of ionized amino groups of chitosan with ionized sulfate groups ofk-carrageenan. Published: June 15, 2007     

Enzymatic grafting of chitosan onto Bombyx mori silk fibroin: kinetic and IR vibrational studies

The potential for using tyrosinase to graft the polysaccharide chitosan (Ch) onto Bombyx mori silk fibroin (SF) was examined. FT-IR spectroscopy coupled to HPLC amino acid analysis showed that mushroom tyrosinase (MT) catalyses the oxidation of tyrosine (Tyr) of SF to electrophilic o-quinones. Kinetic studies showed that only a fraction of the Tyr residues available on the SF chain were oxidized. This result was interpreted in the light of the structure assumed by SF in aqueous solution: Tyr aromatic side chain groups buried into the folded hydrophobic portions of the chain were probably less accessible to MT for steric reasons. Using slightly acidic conditions (pH 6), it was possible to modify SF under homogeneous conditions. FT-IR spectroscopy provided evidence that Ch was grafted onto MT-oxidized SF: the o-quinones were found to undergo a subsequent non-enzymatic reaction with nucleophilic amino groups of Ch via Schiff-base and Michael addition mechanisms. Various factors, i.e. reaction time, pH, MT/SF ratio, were found to influence the grafting yield. The highest grafting yield was achieved at pH 7, i.e. more favorable to MT activity rather than to Ch solubility, suggesting that the determining step of the grafting reaction is the formation of o-quinones. The FT-IR spectroscopy revealed that grafting induced a beta-sheet --> random coil conformational transition.     

Adsorption of BSA on strongly basic chitosan: Equilibria

Equilibrium isotherms for adsorption of bovine serum albumin (BSA) on a new adsorbent, a strongly basic crosslinked chitosan (Chitopearl 2503), which is hard and is not compressed by pressure in a column, have been presented and compared with diethylaminoethyl (DEAE) Sepharose Fast Flow (hard gel). In Chitopearl 2503, when only buffer existed in the BSA solution, the isotherm was not affected by the initial concentration of BSA but it was affected by pH considerably. The isotherm was favorable when pH >/= pl ( congruent with 4.8). When NaCl existed in the BSA solution, the amount of BSA absorbed on the resin decreased with increasing concentration of NaCl. When the concentration of NaCl was 200 mol/m(3), the resin did not adsorb BSA at all. The equilibrium data were correlated by the Langmuir equation reasonably well. The BSA may be adsorbed mainly by electrostatic attraction between negatively charged BSA and positively charged quanternary ammonium groups at pH > pl and by protonation reaction of the primary ammonium groups by weak acid groups of BSA at pH = pl. These are confirmed by measuring the amount of inorganic ion exchanged for BSA. In DEAE Sepharose Fast Flow, the isotherm was favorable when pH > pl but unfavorable ar pH = pl. The saturation capacity of BSA on Chitopearl 2503 is about 1.3 to 2.2 times larger than that on DEAE Sepharose Fast Flow. (c) 1994 John Wiley & Sons, Inc.     

Role of transition metal ferrocyanides (II) in chemical evolution

Due to ease of formation of cyanide under prebiotic conditions, cyanide ion might have formed stable complexes with transition metal ions on the primitive earth. In the course of chemical evolution insoluble metal cyano complexes, which settled at the bottom of primeval sea could have formed peptide and metal amino acid complexes through adsorption processes of amino acids onto these metal cyano complexes.Adsorption of amino acids such as glycine, aspartic acid, and histidine on copper ferrocyanide and zinc ferrocyanide have been studied over a wide pH range of 3.6 – 8.5. Amino acids were adsorbed on the metal ferrocyanide complexes for different time periods. The progress of the adsorption was followed spectro-photometrically using ninhydrin reagent. Histidine was found to show maximum adsorption on both the adsorbents at neutral pH. Zinc ferrocyanide exhibits good sorption behaviour for all the three amino acids used in these investigations.     

Chitosan and lactic acid-grafted chitosan nanoparticles as carriers for prolonged drug delivery

Nanoparticles of approximately 10nm in diameter made with chitosan or lactic acid-grafted chitosan were developed for high drug loading and prolonged drug release. A drug encapsulation efficiency of 92% and a release rate of 28% from chitosan nanoparticles over a 4-week period were demonstrated with bovine serum protein. To further increase drug encapsulation, prolong drug release, and increase chitosan solubility in solution of neutral pH, chitosan was modified with lactic acid by grafting D,L-lactic acid onto amino groups in chitosan without using a catalyst. The lactic acid-grafted chitosan nanoparticles demonstrated a drug encapsulation efficiency of 96% and a protein release rate of 15% over 4 weeks. With increased protein concentration, the drug encapsulation efficiency decreased and drug release rate increased. Unlike chitosan, which is generally soluble only in acid solution, the chitosan modified with lactic acid can be prepared from solutions of neutral pH, offering an additional advantage of allowing proteins or drugs to be uniformly incorporated in the matrix structure with minimal or no denaturization.     

Encapsulating live cells with water-soluble chitosan in physiological conditions

A new class of microcapsules was prepared under physiological conditions by polyelectrolyte complexation between two oppositely-charged, water-soluble polymers. The microcapsules consisted of an inner core of half N-acetylated chitosan and an outer shell of methacrylic acid (MAA) (20.4%)-hydroxyethyl methacrylate (HEMA) (27.4%)-methyl methacrylate (MMA) (52.2%) (MAA-HEMA-MMA) terpolymer. Both 400 and 150 kDa half N-acetylated chitosans maintained good water solubility and supplied enough protonated amino groups to coacervate with terpolymer at pH 7.0-7.4, in contrast to other chitosan-based microcapsules which must be prepared at pH <6.5. The viscosity of half N-acetylated chitosan solutions between 80 and 3000 cPas allowed the formation of microcapsules with spherical shape. Molar mass, pH and concentration of half N-acetylated chitosan, and reaction time, influenced the morphology, thickness and porosity of the microcapsules. Microcapsules formed with high concentration of half N-acetylated chitosan exhibited improved mechanical stability, whereas microcapsules formed with low concentration of half N-acetylated chitosan exhibited good permeability. This 3D microenvironment has been configured to cultivate sensitive anchorage-dependent cells such as hepatocytes to maintain high level of functions.     

Adsorption behaviour of Fe(II) and Fe(III) ions in aqueous solution on chitosan and cross-linked chitosan beads

A batch adsorption system was applied to study the adsorption of Fe(II) and Fe(III) ions from aqueous solution by chitosan and cross-linked chitosan beads. The adsorption capacities and rates of Fe(II) and Fe(III) ions onto chitosan and cross-linked chitosan beads were evaluated. Chitosan beads were cross-linked with glutaraldehyde (GLA), epichlorohydrin (ECH) and ethylene glycol diglycidyl ether (EGDE) in order to enhance the chemical resistance and mechanical strength of chitosan beads. Experiments were carried out as function of pH, agitation period, agitation rate and concentration of Fe(II) and Fe(III) ions. Langmuir and Freundlich adsorption models were applied to describe the isotherms and isotherm constants. Equilibrium data agreed very well with the Langmuir model. The kinetic experimental data correlated well with the second-order kinetic model, indicating that the chemical sorption was the rate-limiting step. Results also showed that chitosan and cross-linked chitosan beads were favourable adsorbers.