Structure-based mutagenesis reveals critical residues in the transferrin receptor participating in the mechanism of pH-induced release of iron from human serum transferrin

The recent crystal structure of two monoferric human serum transferrin (Fe(N)hTF) molecules bound to the soluble portion of the homodimeric transferrin receptor (sTFR) has provided new details about this binding interaction that dictates the delivery of iron to cells. Specifically, substantial rearrangements in the homodimer interface of the sTFR occur as a result of the binding of the two Fe(N)hTF molecules. Mutagenesis of selected residues in the sTFR highlighted in the structure was undertaken to evaluate the effect on function. Elimination of Ca(2+) binding in the sTFR by mutating two of four coordinating residues ([E465A,E468A]) results in low production of an unstable and aggregated sTFR. Mutagenesis of two histidines ([H475A,H684A]) at the dimer interface had little effect on the kinetics of release of iron at pH 5.6 from either lobe, reflecting the inaccessibility of this cluster to solvent. Creation of an H318A sTFR mutant allows assignment of a small pH-dependent initial decrease in the magnitude of the fluorescence signal to His318. Removal of the four C-terminal residues of the sTFR, Asp757-Asn758-Glu759-Phe760, eliminates pH-stimulated release of iron from the C-lobe of the Fe(2)hTF/sTFR Δ757-760 complex. The inability of this sTFR mutant to bind and stabilize protonated hTF His349 (a pH-inducible switch) in the C-lobe of hTF accounts for the loss. Collectively, these studies support a model in which a series of pH-induced events involving both TFR residue His318 and hTF residue His349 occurs to promote receptor-stimulated release of iron from the C-lobe of hTF.     

Mutational analysis of C-lobe ligands of human serum transferrin: insights into the mechanism of iron release

Each homologous lobe of human serum transferrin (hTF) has one Fe(3+) ion bound by an aspartic acid, a histidine, two tyrosine residues, and two oxygens from the synergistic anion, carbonate. Extensive characterization of these ligands in the N-terminal lobe has been carried out. Despite sharing the same set of ligands, there is a substantial amount of evidence that the N- and C-lobes are inequivalent. Studies of full-length hTF have shown that iron release from each lobe is kinetically distinguishable. To simplify the assessment of mutations in the C-lobe, we have created mutant hTF molecules in which the N-lobe binds iron with high affinity or not at all. Mutations targeting the C-lobe liganding residues have been introduced into these hTF constructs. UV-visible spectral, kinetic, and EPR studies have been undertaken to assess the effects of each mutation and to allow direct comparison to the N-lobe. As found for the N-lobe, the presence of Y517 in the C-lobe (equivalent to Y188 in the N-lobe) is absolutely essential for the binding of iron. Unlike the N-lobe, however, mutation of Y426 (equivalent to Y95) does not produce a stable complex with iron. For the mutants that retain the ability to bind iron (D392S and H585A), the rates of release are considerably slower than those measured for equivalent mutations in the N-lobe at both pH 7.4 and pH 5.6. Equilibrium binding experiments with HeLa S(3) cells indicate that recombinant hTF, in which Y426 or H585 is mutated, favor a closed or nearly closed conformation while those with mutations of the D392 or Y517 ligands appear to promote an open conformation. The differences in the effects of mutating the liganding residues in the two lobes and the subtle indications of cooperativity between lobes point to the importance of the transferrin receptor in effecting iron release from the C-lobe. Significantly, the equilibrium binding experiments also indicate that, regardless of which lobe contains the iron, the free energy of binding is equivalent and not additive; each monoferric hTF has a free energy of binding that is 82% of diferric hTF.     

The Unique Kinetics of Iron Release from Transferrin: The Role of Receptor, Lobe-Lobe Interactions, and Salt at Endosomal pH

Transferrins are a family of bilobal iron-binding proteins that play the crucial role of binding ferric iron and keeping it in solution, thereby controlling the levels of this important metal. Human serum transferrin (hTF) carries one iron in each of two similar lobes. Understanding the detailed mechanism of iron release from each lobe of hTF during receptor-mediated endocytosis has been extremely challenging because of the active participation of the transferrin receptor (TFR), salt, a chelator, lobe-lobe interactions, and the low pH within the endosome. Our use of authentic monoferric hTF (unable to bind iron in one lobe) or diferric hTF (with iron locked in one lobe) provided distinct kinetic end points, allowing us to bypass many of the previous difficulties. The capture and unambiguous assignment of all kinetic events associated with iron release by stopped-flow spectrofluorimetry, in the presence and in the absence of the TFR, unequivocally establish the decisive role of the TFR in promoting efficient and balanced iron release from both lobes of hTF during one endocytic cycle. For the first time, the four microscopic rate constants required to accurately describe the kinetics of iron removal are reported for hTF with and without the TFR. Specifically, at pH 5.6, the TFR enhances the rate of iron release from the C-lobe (7-fold to 11-fold) and slows the rate of iron release from the N-lobe (6-fold to 15-fold), making them more equivalent and producing an increase in the net rate of iron removal from Fe₂hTF. Calculated cooperativity factors, in addition to plots of time-dependent species distributions in the absence and in the presence of the TFR, clearly illustrate the differences. Accurate rate constants for the pH and salt-induced conformational changes in each lobe precisely delineate how delivery of iron within the physiologically relevant time frame of 2 min might be accomplished.     

Effect of glycosylation on the function of a soluble, recombinant form of the transferrin receptor

Production of the soluble portion of the transferrin receptor (sTFR) by baby hamster kidney (BHK) cells is described, and the effect of glycosylation on the biological function of sTFR is evaluated for the first time. The sTFR (residues 121-760) has three N-linked glycosylation sites (Asn251, Asn317, and Asn727). Although fully glycosylated sTFR is secreted into the tissue culture medium ( approximately 40 mg/L), no nonglycosylated sTFR could be produced, suggesting that carbohydrate is critical to the folding, stability, and/or secretion of the receptor. Mutants in which glycosylation at positions 251 and 727 (N251D and N727D) is eliminated are well expressed, whereas production of the N317D mutant is poor. Analysis by electrospray ionization mass spectrometry confirms dimerization of the sTFR and the absence of the carbohydrate at the single site in each mutant. The effect of glycosylation on binding to diferric human transferrin (Fe(2) hTF), an authentic monoferric hTF with iron in the C-lobe (designated Fe(C) hTF), and a mutant (designated Mut-Fe(C) hTF that features a 30-fold slower iron release rate) was determined by surface plasmon resonance; a small ( approximately 20%) but consistent difference is noted for the binding of Fe(C) hTF and the Mut-Fe(C) hTF to the sTFR N317D mutant. The rate of iron release from Fe(C) hTF and Mut-Fe(C) hTF in complex with the sTFR and the sTFR mutants at pH 5.6 reveals that only the N317D mutant has a significant effect. The carbohydrate at position 317 lies close to a region of the TFR previously shown to interact with hTF.     

Interlobe communication in human serum transferrin: metal binding and conformational dynamics investigated by electrospray ionization mass spectrometry

Human serum transferrin (hTF) is an iron transport protein, comprising two lobes (N and C), each containing a single metal-binding center. Despite substantial structural similarity between the two lobes, studies have demonstrated the existence of significant differences in their metal-binding properties. The nature of these differences has been elucidated through the use of electrospray ionization mass spectrometry to study both metal retention and conformational properties of hTF under a variety of conditions. In the absence of chelating agents or nonsynergistic anions, the diferric form of hTF remains intact until the pH is lowered to 4.5. The monoferric form of hTF retains the compact conformation until the pH is lowered to 4.0, whereas the apoprotein becomes partially unfolded at pH as high as 5.5. Selective (lobe-specific) modulation of the iron-binding properties of hTF using recombinant forms of the protein (in which the pH-sensitive elements in each lobe were mutated) verifies that the N-lobe of the protein has a lower affinity for ferric ion. Surprisingly, the apo-N-lobe is significantly less flexible compared to the apo-C-lobe. Furthermore, the conformation of the iron-free N-lobe is stabilized when the C-lobe contains iron, confirming the existence of an interlobe interaction within the protein. The experimental results provide strong support for the earlier suggestion that hTF interacts with its receptor (TFR) primarily through the C-lobe both at the cell surface and inside the endosome.     

Evidence that His349 acts as a pH-inducible switch to accelerate receptor-mediated iron release from the C-lobe of human transferrin

His349 in human transferrin (hTF) is a residue critical to transferrin receptor (TFR)-stimulated iron release from the C-lobe. To evaluate the importance of His349 on the TFR interaction, it was replaced by alanine, aspartate, lysine, leucine, tryptophan, and tyrosine in a monoferric C-lobe hTF construct (Fe_ChTF). Using a stopped-flow spectrofluorimeter, we determined rate processes assigned to iron release and conformational events (in the presence and in the absence of the TFR). Significantly, all mutant/TFR complexes feature dampened iron release rates. The critical contribution of His349 is most convincingly revealed by analysis of the kinetics as a function of pH (5.6–6.2). The Fe_ChTF/TFR complex titrates with a pK _a of approximately 5.9. By contrast, the H349A mutant/TFR complex releases iron at higher pH with a profile that is almost the inverse of that of the control complex. At the putative endosomal pH of 5.6 (in the presence of salt and chelator), iron is released from the H349W mutant/TFR and H349Y mutant/TFR complexes with a single rate constant similar to the iron release rate constant for the control; this suggests that these substitutions bypass the required pH-induced conformational change allowing the C-lobe to directly interact with the TFR to release iron. The H349K mutant proves that although the positive charge is crucial to complete iron release, the geometry at this position is also critical. The H349D mutant shows that a negative charge precludes complete iron release at pH 5.6 both in the presence and in the absence of the TFR. Thus, histidine uniquely drives the pH-induced conformational change in the C-lobe required for TFR interaction, which in turn promotes iron release.     

Ionic residues of human serum transferrin affect binding to the transferrin receptor and iron release

Efficient delivery of iron is critically dependent on the binding of diferric human serum transferrin (hTF) to its specific receptor (TFR) on the surface of actively dividing cells. Internalization of the complex into an endosome precedes iron removal. The return of hTF to the blood to continue the iron delivery cycle relies on the maintenance of the interaction between apohTF and the TFR after exposure to endosomal pH (≤6.0). Identification of the specific residues accounting for the pH-sensitive nanomolar affinity with which hTF binds to TFR throughout the cycle is important to fully understand the iron delivery process. Alanine substitution of 11 charged hTF residues identified by available structures and modeling studies allowed evaluation of the role of each in (1) binding of hTF to the TFR and (2) TFR-mediated iron release. Six hTF mutants (R50A, R352A, D356A, E357A, E367A, and K511A) competed poorly with biotinylated diferric hTF for binding to TFR. In particular, we show that Asp356 in the C-lobe of hTF is essential to the formation of a stable hTF-TFR complex: mutation of Asp356 in the monoferric C-lobe hTF background prevented the formation of the stoichiometric 2:2 (hTF:TFR monomer) complex. Moreover, mutation of three residues (Asp356, Glu367, and Lys511), whether in the diferric or monoferric C-lobe hTF, significantly affected iron release when in complex with the TFR. Thus, mutagenesis of charged hTF residues has allowed identification of a number of residues that are critical to formation of and release of iron from the hTF-TFR complex.     

Investigation of the mechanism of iron release from the C-lobe of human serum transferrin: mutational analysis of the role of a pH sensitive triad

The transferrins (TFs) are a family of proteins that are widely distributed in vertebrates, where they serve a major role in iron binding and transport. Most TFs are composed of two homologous lobes, the N- and C-lobes, each able to bind a single iron atom. Human serum transferrin (hTF) binds iron in the blood and delivers it to actively dividing cells; through the process of receptor-mediated endocytosis, diferric hTF in the serum (pH approximately 7.4) binds to specific TF receptors on the cell surface and is internalized, whereupon a pH drop in the endosome (pH approximately 5.6) facilitates iron release. Many factors affect the rate of iron release, including pH, chelator, temperature, salt, and lobe-lobe interactions. We, and others, have actively studied the mechanism of iron release from the recombinant N-lobe of hTF; in contrast, the exact details of iron release from the C-lobe have remained less well characterized but appear to differ from those found for the N-lobe. Recently, to simplify the purification protocol, we have expressed and purified full-length recombinant hTF containing an N-terminal hexahistidine tag [Mason et al. (2002) Biochemistry 41, 9448-9454]. In the present work, we have expressed a full-length recombinant hTF containing a K206E mutation such that the N-lobe does not readily release iron. The resulting full-length hTF allows us to focus on the C-lobe and to study the effects of mutations introduced into the C-lobe. The success of this strategy is documented and in vitro mutagenesis is used to identify three residues in the C-lobe that are critical for iron-release. Although the importance of this triad is unequivocally demonstrated, further studies are needed to completely elucidate the mechanism of iron release from the C-lobe of hTF. In addition, the striking difference in the effect of increasing salt concentrations on iron release from the two lobes of hTF is further documented in the present work.     

Composition of pH-sensitive triad in C-lobe of human serum transferrin. Comparison to sequences of ovotransferrin and lactoferrin provides insight into functional differences in iron release

The transferrins (TF) are a family of bilobal glycoproteins that tightly bind ferric iron. Each of the homologous N- and C-lobes contains a single iron-binding site situated in a deep cleft. Human serum transferrin (hTF) serves as the iron transport protein in the blood; circulating transferrin binds to receptors on the cell surface, and the complex is internalized by endocytosis. Within the cell, a reduction in pH leads to iron release from hTF in a receptor-dependent process resulting in a large conformational change in each lobe. In the hTF N-lobe, two critical lysines facilitate this pH-dependent conformational change allowing entry of a chelator to capture the iron. In the C-lobe, the lysine pair is replaced by a triad of residues: Lys534, Arg632, and Asp634. Previous studies show that mutation of any of these triad residues to alanine results in significant retardation of iron release at both pH 7.4 and pH 5.6. In the present work, the role of the three residues is probed further by conversion to the residues observed at the equivalent positions in ovotransferrin (Q-K-L) and human lactoferrin (K-N-N) as well as a triad with an interchanged lysine and arginine (K534R/R632K). As expected, all of the constructs bind iron and associate with the receptor with nearly the same K(D) as the wild-type monoferric hTF control. However, interesting differences in the effect of the substitutions on the iron release rate in the presence and absence of the receptor at pH 5.6 are observed. Additionally, titration with KCl indicates that position 632 must have a positively charged residue to elicit a robust rate acceleration as a function of increasing salt. On the basis of these observations, a model for iron release from the hTF C-lobe is proposed. These studies provide insight into the importance of charge and geometry of the amino acids at these positions as a partial explanation for differences in behavior of individual TF family members, human serum transferrin, ovotransferrin, and lactoferrin. The studies collectively highlight important features common to both the N- and C-lobes of TF and the critical role of the receptor in iron release.     

Intrinsic fluorescence reports a global conformational change in the N-lobe of human serum transferrin following iron release

Transferrins have been extensively studied in order to understand how they reversibly bind and release iron. Human serum transferrin (hTF) is a single polypeptide chain that folds into two lobes (N- and C-lobe); each lobe binds a single ferric ion. Iron release induces a large conformational change in each lobe. At the putative endosomal pH of 5.6, measurement of the increase in intrinsic fluorescence upon iron release from the recombinant N-lobe yields two rate constants: 8.9 min-1 and 1.3 min-1. Direct monitoring of iron release from the N-lobe at pH 5.6 (by the decrease in absorbance at 470 nm) gives a single rate constant of 9.1 min-1, definitively establishing that the faster rate constant in the fluorescent studies is due to iron release. To further elucidate the molecular basis of the intrinsic fluorescence change (and the source of the slower rate constant), we examined the contributions of the three individual tryptophan residues in the N-lobe (Trp8, Trp128, and Trp264). Three double mutants, each containing the single remaining tryptophan residue, were produced. In the iron-bound N-lobe, Trp128 and Trp264 are quenched by iron and account for almost the entire fluorescent signal when iron is released. As for the wild-type N-lobe, the fluorescence increase for each of these mutants is best fit by a double-exponential function indicating two processes. Trp8 is severely quenched under all conditions, making virtually no contribution to the signal. Additionally, a mutant lacking all three Trp residues allows assignment of the fluorescent signal completely to the three tryptophan residues and observation of the presence of one (or more) tyrosinates in the N-lobe that have physiological significance in the uptake of iron.     

The oxalate effect on release of iron from human serum transferrin explained

A unique feature of the mechanism of iron binding to the transferrin (TF) family is the synergistic relationship between metal binding and anion binding. Little or no iron will bind to the protein without concomitant binding of an anion, physiologically identified as carbonate. Substitution of oxalate for carbonate produces no significant changes in polypeptide folding or domain orientation in the N-lobe of human serum TF (hTF) as revealed by our 1.2A structure. The oxalate is able to bind to the iron in a symmetric bidentate fashion, which, combined with the low pK(a) of the oxalate anion, makes iron displacement more difficult as documented by both iron release kinetic and equilibrium data. Characterization of an N-lobe in which the arginine at position 124 is mutated to alanine reveals that the stabilizing effect of oxalate is even greater in this mutant and nearly cancels the destabilizing effect of the mutation. Importantly, incorporation of oxalate as the synergistic anion appears to completely inhibit removal of iron from recombinant full-length hTF by HeLa S(3) cells, strongly indicating that oxalate also replaces carbonate in the C-lobe to form a stable complex. Kinetic studies confirm this claim. The combination of structural and functional data provides a coherent delineation of the effect of oxalate binding on hTF and rationalizes the results of many previous studies. In the context of iron uptake by cells, substitution of carbonate by oxalate effectively locks the iron into each lobe of hTF, thereby interfering with normal iron metabolism.     

A poly-His tag method for obtaining the C-terminal lobe of human transferrin

Human serum transferrin is an essential bilobal protein that transports iron in the circulation for delivery to iron-requiring cells. Obtaining the C-terminal lobe of human transferrin in verified native conformation has been problematic, possibly because its 11 disulfide bonds lead to misfolding when the lobe is expressed without its accompanying N-lobe. A recently reported method for preparing the C-lobe free of extraneous residues, with normal iron-binding properties and capable of delivering iron to cells, makes use of a Factor Xa cleavage site inserted into the interlobal connecting strand of the full-length protein. An inefficient step in this method requires the use of ConA chromatography to separate the cleaved lobes from each other, since only the C-lobe is glycosylated. Inserting a 6-His sequence near the start of the N-lobe enhances recovery of the recombinant transferrin from other proteins in the culture medium of the BHK21 cells expressing the mutant transferrin. The new procedure is more economical in time and effort than its predecessor, and offers the additional advantage of isolating C-lobe expressed with or without its glycan chains.     

Large cooperativity in the removal of iron from transferrin at physiological temperature and chloride ion concentration

Iron removal from serum transferrin by various chelators has been studied by gel electrophoresis, which allows direct quantitation of all four forms of transferrin (diferric, C-monoferric, N-monoferric, and apotransferrin). Large cooperativity between the two lobes of serum transferrin is found for iron removal by several different chelators near physiological conditions (pH 7.4, 37 °C, 150 mM NaCl, 20 mM NaHCO₃). This cooperativity is manifested in a dramatic decrease in the rate of iron removal from the N-monoferric transferrin as compared with iron removal from the other forms of ferric transferrin. Cooperativity is diminished as the pH is decreased; it is also very sensitive to changes in chloride ion concentration, with a maximum cooperativity at 150 mM NaCl. A mechanism is proposed that requires closure of the C-lobe before iron removal from the N-lobe can be effected; the open conformation of the C-lobe blocks a kinetically significant anion-binding site of the N-lobe, preventing its opening. Physiological implications of this cooperativity are discussed.     

Identification of the epitope of a monoclonal antibody that disrupts binding of human transferrin to the human transferrin receptor

The molecular basis of the transferrin (TF)-transferrin receptor (TFR) interaction is not known. The C-lobe of TF is required to facilitate binding to the TFR and both the N- and C-lobes are necessary for maximal binding. Several mAb have been raised against human transferrin (hTF). One of these, designated F11, is specific to the C-lobe of hTF and does not recognize mouse or pig TF. Furthermore, mAb F11 inhibits the binding of TF to TFR on HeLa cells. To map the epitope for mAb F11, constructs spanning various regions of hTF were expressed as glutathione S-transferase (GST) fusion proteins in Escherichia coli. The recombinant fusion proteins were analysed in an iterative fashion by immunoblotting using mAb F11 as the probe. This process resulted in the localization of the F11 epitope to the C1 domain (residues 365-401) of hTF. Subsequent computer modelling suggested that the epitope is probably restricted to a surface patch of hTF consisting of residues 365-385. Mutagenesis of the F11 epitope of hTF to the sequence of either mouse or pig TF confirmed the identity of the epitope as immunoreactivity was diminished or lost. In agreement with other studies, these epitope mapping studies support a role for residues in the C1 domain of hTF in receptor binding.     

The mechanism of iron release from the transferrin-receptor 1 adduct

We report the determination in cell-free assays of the mechanism of iron release from the N-lobe and C-lobe of human serum transferrin in interaction with intact transferrin receptor 1 at 4.3< or =pH< or =6.5. Iron is first released from the N-lobe in the tens of milliseconds range and then from the C-lobe in the hundreds of seconds range. In both cases, iron loss is rate-controlled by slow proton transfers, rate constant for the N-lobe k(1)=1.20(+/-0.05)x10(6)M(-1)s(-1) and for the C-lobe k(2)=1.6(+/-0.1)x10(3)M(-1)s(-1). This iron loss is subsequent to a fast proton-driven decarbonation and is followed by two proton gains, (pK(1a))/2=5.28 per proton for the N-lobe and (pK(2a))/2=5.10 per proton for the C-lobe. Under similar experimental conditions, iron loss is about 17-fold faster from the N-lobe and is at least 200-fold faster from the C-lobe when compared to holotransferrin in the absence of receptor 1. After iron release, the apotransferrin-receptor adduct undergoes a slow partial dissociation controlled by a change in the conformation of the receptor; rate constant k(3)=1.7(+/-0.1)x10(-3)s(-1). At endosomic pH, the final equilibrated state is attained in about 1000 s, after which the free apotransferrin, two prototropic species of the acidic form of the receptor and apotransferrin interacting with the receptor coexist simultaneously. However, since recycling of the vesicle containing the receptor to the cell surface takes a few minutes, the major part of transferrin will still be forwarded to the biological fluid in the form of the apotransferrin-receptor protein-protein adduct.     

Dual role of Lys206-Lys296 interaction in human transferrin N-lobe: iron-release trigger and anion-binding site.

The unique structural feature of the dilysine (Lys206-Lys296) pair in the transferrin N-lobe (hTF/2N) has been postulated to serve a special function in the release of iron from the protein. These two lysines, which are located in opposite domains, hydrogen bond to each other in the iron-containing hTF/2N at neutral pH but are far apart in the apo-form of the protein. It has been proposed that charge repulsion resulting from the protonation of the dilysines at lower pH may be the trigger to open the cleft and facilitate iron release. The fact that the dilysine pair is positively charged and resides in a location close to the metal-binding center has also led to the suggestion that the dilysine pair is an anion-binding site for chelators. The present report provides comprehensive evidence to confirm that the dilysine pair plays this dual role in modulating release of iron. When either of the lysines is mutated to glutamate or glutamine or when both are mutated to glutamate, release of iron is much slower compared to the wild-type protein. This is due to the fact that the driving force for cleft opening is absent in the mutants or is converted to a lock-like interaction (in the case of the K206E and K296E mutants). Direct titration of the apo-proteins with anions as well as anion-dependent iron release studies show that the dilysine pair is part of an active anion-binding site which exists with the Lys296-Tyr188 interaction as a core. At this site, Lys296 serves as the primary anion-binding residue and Tyr188 is the main reporter for electronic spectral change, with smaller contributions from Lys206, Tyr85, and Tyr95. In iron-loaded hTF/2N, anion binding becomes invisible as monitored by UV-vis difference spectra since the spectral reporters Tyr188 and Tyr95 are bound to iron. Our data strongly support the hypothesis that the apo-hTF/2N exists in equilibrium between the open and closed conformations, because only in the closed form is Lys296 in direct contact with Tyr188. The current findings bring together observations, ideas, and experimental data from a large number of previous studies and shed further light on the detailed mechanism of iron release from the transferrin N-lobe. In iron-containing hTF/2N, Lys296 may still function as a target to introduce an anion (or a chelator) near to the iron-binding center. When the pH is lowered, the protonation of carbonate (synergistic anion for metal binding) and then the dilysine pair form the driving force to loosen the cleft, exposing iron; the nearby anion (or chelator) then binds to the iron and releases it from the protein.     

Iron release from transferrin, its C-lobe, and their complexes with transferrin receptor: presence of N-lobe accelerates release from C-lobe at endosomal pH

Human transferrin, like other members of the transferrin class of iron-binding proteins, is a bilobal structure, the product of duplication and fusion of an ancestral gene during the course of biochemical evolution. Although the two lobes exhibit 45% sequence identity and identical ligand structures of their iron-binding sites (one in each lobe), they differ in their iron-binding properties and their responsiveness to complex formation with the transferrin receptor. A variety of interlobe interactions modulating these iron-binding functions has been described. We have now studied the kinetics of iron release to pyrophosphate from the isolated recombinant C-lobe and from that lobe in the intact protein, each free and bound to receptor. The striking finding is that the rates of iron release at the pH of the endosome to which transferrin is internalized by the iron-dependent cell are similar in the free proteins but 18 times faster from full-length monoferric transferrin selectively loaded with iron in the C-lobe than from isolated C-lobe when each is complexed to the receptor. The possibility that the faster release in the receptor complex of the full-length protein at endosomal pH contributes to the evolutionary advantage of the bilobal structure is considered.     

Camel lactoferrin, a transferrin-cum-lactoferrin: crystal structure of camel apolactoferrin at 2.6 A resolution and structural basis of its dual role

Camel lactoferrin is the first protein from the transferrin superfamily that has been found to display the characteristic functions of iron binding and release of lactoferrin as well as transferrin simultaneously. It was remarkable to observe a wide pH demarcation in the release of iron from two lobes. It loses 50 % iron at pH 6.5 and the remaining 50 % iron is released only at pH values between 4.0 and 2.0. Furthermore, proteolytically generated N and C-lobes of camel lactoferrin showed that the C-lobe lost iron at pH 6.5, while the N-lobe lost it only at pH less than 4.0. In order to establish the structural basis of this striking observation, the purified camel apolactoferrin was crystallized. The crystals belong to monoclinic space group C2 with unit cell dimensions a=175.8 A, b=80.9 A, c=56.4 A, beta=92.4 degrees and Z=4. The structure has been determined by the molecular replacement method and refined to an R-factor of 0.198 (R-free=0.268) using all the data in the resolution range of 20.0-2.6 A. The overall structure of camel apolactoferrin folds into two lobes which contain four distinct domains. Both lobes adopt open conformations indicating wide distances between the iron binding residues in the native iron-free form of lactoferrin. The dispositions of various residues of the iron binding pocket of the N-lobe of camel apolactoferrin are similar to those of the N-lobe in human apolactoferrin, while the corresponding residues in the C-lobe show a striking similarity with those in the C-lobes of duck and hen apo-ovotransferrins. These observations indicate that the N-lobe of camel apolactoferrin is structurally very similar to the N-lobe of human apolactoferrin and the structure of the C-lobe of camel apolactoferrin matches closely with those of the hen and duck apo-ovotransferrins. These observations suggest that the iron binding and releasing behaviour of the N-lobe of camel lactoferrin is similar to that of the N-lobe of human lactoferrin, whereas that of the C-lobe resembles those of the C-lobes of duck and hen apo-ovotransferrins. Hence, it correlates with the observation of the N-lobe of camel lactoferrin losing iron at a low pH (4.0-2.0) as in other lactoferrins. On the other hand, the C-lobe of camel lactoferrin loses iron at higher pH (7.0-6.0) like transferrins suggesting its functional similarity to that of transferrins. Thus, camel lactoferrin can be termed as half lactoferrin and half transferrin.     

The position of arginine 124 controls the rate of iron release from the N-lobe of human serum transferrin. A structural study

Human serum transferrin (hTF) is a bilobal iron-binding and transport protein that carries iron in the blood stream for delivery to cells by a pH-dependent mechanism. Two iron atoms are held tightly in two deep clefts by coordination to four amino acid residues in each cleft (two tyrosines, a histidine, and an aspartic acid) and two oxygen atoms from the "synergistic" carbonate anion. Other residues in the binding pocket, not directly coordinated to iron, also play critical roles in iron uptake and release through hydrogen bonding to the liganding residues. The original crystal structures of the iron-loaded N-lobe of hTF (pH 5.75 and 6.2) revealed that the synergistic carbonate is stabilized by interaction with Arg-124 and that both the arginine and the carbonate adopt two conformations (MacGillivray, R. T. A., Moore, S. A., Chen, J., Anderson, B. F., Baker, H., Luo, Y. G., Bewley, M., Smith, C. A., Murphy, M. E., Wang, Y., Mason, A. B., Woodworth, R. C., Brayer, G. D., and Baker, E. N. (1998) Biochemistry 37, 7919-7928). In the present study, we show that the two conformations are also found for a structure at pH 7.7, indicating that this finding was not strictly a function of pH. We also provide structures for two single point mutants (Y45E and L66W) designed to force Arg-124 to adopt each of the previously observed conformations. The structures of each mutant show that this goal was accomplished, and functional studies confirm the hypothesis that access to the synergistic anion dictates the rate of iron release. These studies highlight the importance of the arginine/carbonate movement in the mechanism of iron release in the N-lobe of hTF. Access to the carbonate via a water channel allows entry of protons and anions, enabling the attack on the iron.