Direct evidence for specific interactions of the fibrinogen alphaC-domains with the central E region and with each other

The carboxyl-terminal regions of the fibrinogen Aalpha chains (alphaC regions) form compact alphaC-domains tethered to the bulk of the molecule with flexible alphaC-connectors. It was hypothesized that in fibrinogen two alphaC-domains interact intramolecularly with each other and with the central E region preferentially through its N-termini of Bbeta chains and that removal of fibrinopeptides A and B upon fibrin assembly results in dissociation of the alphaC regions and their switch to intermolecular interactions. To test this hypothesis, we studied the interactions of the recombinant alphaC region (Aalpha221-610 fragment) and its subfragments, alphaC-connector (Aalpha221-391) and alphaC-domain (Aalpha392-610), between each other and with the recombinant (Bbeta1-66)2 and (beta15-66)2 fragments and NDSK corresponding to the fibrin(ogen) central E region, using laser tweezers-based force spectroscopy. The alphaC-domain, but not the alphaC-connector, bound to NDSK, which contains fibrinopeptides A and B, and less frequently to desA-NDSK and (Bbeta1-66)2 containing only fibrinopeptides B; it was poorly reactive with desAB-NDSK and (beta15-66)2 both lacking fibrinopeptide B. The interactions of the alphaC-domains with each other and with the alphaC-connector were also observed, although they were weaker and heterogeneous in strength. These results provide the first direct evidence for the interaction between the alphaC-domains and the central E region through fibrinopeptide B, in agreement with the hypothesis given above, and indicate that fibrinopeptide A is also involved. They also confirm the hypothesized homomeric interactions between the alphaC-domains and display their interaction with the alphaC-connectors, which may contribute to covalent cross-linking of alpha polymers in fibrin.     

Differences in the clotting of lamprey fibrinogen by lamprey and bovine thrombins

1. Improved methods for the purification of lamprey thrombin and fibrinogen are presented. 2. Lamprey thrombin releases two fibrinopeptides from lamprey fibrinogen during the transformation into fibrin. Bovine thrombin releases only one of these, a peptide referred to as fibrinopeptide B. The differences in the by-products of fibrin formation are reflected in the different N-terminal amino acid compositions of the two types of fibrin. 3. The fibrinopeptide that is not removed from the lamprey fibrinogen by bovine thrombin can subsequently be released by treatment of that fibrin with lamprey thrombin. 4. Under the conditions used, lamprey thrombin releases both fibrinopeptides at about the same rate. 5. The differences in interaction among these pairs of related proteins are extreme manifestations of the phenomenon loosely referred to as `species specificity'.     

Localization of the binding site on fibrin for the secondary binding site of thrombin

Affinity chromatography of active site inhibited thrombin on immobilized fragments derived from the central (desAB-NDSK) and terminal (D1) globular domains of fibrinogen revealed that the site responsible for the binding of thrombin at its secondary fibrin binding site is located in the central domain. Chromatography of various domains of the central nodule (desAB-NDSK, fibrinogen E, and fibrin E) having nonidentical amino acid sequences showed that all of these fragments are capable of binding to PMSF-thrombin-Sepharose, suggesting that the thrombin binding site resides within the peptide regions common to all of these fragments: alpha(Gly17-Met51), beta(Val55-Met118), and gamma(Tyr1-Lys53). Competitive affinity chromatography of the same binding domains revealed that there is no detectable difference in their binding constants to PMSF-thrombin-Sepharose, indicating that the alpha(Lys52-Lys78), beta(Gly15-Lys54)/(Tyr119-Lys122), and gamma(Thr54-Met78) peptide segments do not contribute significantly to the binding of thrombin. Chromatography of the isolated chains of fibrinogen E showed that the alpha(Gly17-Lys78) peptide region itself contains a strong binding site for PMSF-thrombin-Sepharose. The location of the binding site suggests that the secondary site interaction may play an important role in determining the cleavage specificity of thrombin on fibrinogen and can affect the rate of release of the fibrinopeptides. Affinity chromatography of fragments prepared from polymerized fibrin showed that cross-linked DD (D x D) itself does not bind to thrombin, whereas the D x DE complex remained attached to the column, suggesting that the binding site on fragment E for thrombin is distinct from its binding site for D x D.(ABSTRACT TRUNCATED AT 250 WORDS)     

Novel aspects of fibrin(ogen) fragments during inflammation

Coagulation is fundamental for the confinement of infection and/or the inflammatory response to a limited area. Under pathological inflammatory conditions such as arthritis, multiple sclerosis or sepsis, an uncontrolled activation of the coagulation system contributes to inflammation, microvascular failure and organ dysfunction. Coagulation is initiated by the activation of thrombin, which, in turn, triggers fibrin formation by the release of fibrinopeptides. Fibrin is cleaved by plasmin, resulting in clot lysis and an accompanied generation of fibrin fragments such as D and E fragments. Various coagulation factors, including fibrinogen and/or fibrin [fibrin(ogen)] and also fibrin degradation products, modulate the inflammatory response by affecting leukocyte migration and cytokine production. Fibrin fragments are mostly proinflammatory, however, Bβ15-42 in particular possesses potential antiinflammatory effects. Bβ15-42 inhibits Rho-kinase activation by dissociating Fyn from Rho and, hence prevents stress-induced loss of endothelial barrier function and also leukocyte migration. This article summarizes the state-of-the-art in inflammatory modulation by fibrin(ogen) and fibrin fragments. However, further research is required to gain better understanding of the entire role fibrin fragments play during inflammation and, possibly, disease development.     

Effects of fibrinopeptide cleavage on the plasmic degradation pathways of human cross-linked fibrin

The presence of fibrinopeptide B in human fibrin has a significant effect on plasmic degradation pathways of cross-linked clots. Two types of fibrin were obtained from fibrinogen by incubation either with thrombin, to remove both fibrinopeptides A and B, or with batroxobin, to cleave fibrinopepitde A only. Fibrins obtained after various incubation times were characterized by the determination of the NH2-terminal amino acids, the content of fibrinopeptides, and the extent of cross-linking. The fibrins were digested by plasmin and were analyzed by polyacrylamide gel electrophoresis. The presence and concentration of the (DD)E complex, as well as fragments E1 and E2, in the digests were dependent upon the loss of fibrinopeptide B from cross-linked fibrin. These degradation products, and also fragment DD, appear to be useful molecular markers of fibrinolysis.     

Probing interactions between the coagulants thrombin, Factor XIII, and fibrin(ogen)

Thrombin cleaves fibrinopeptides A and B from fibrinogen leading to the formation of a fibrin network that is later covalently crosslinked by Factor XIII (FXIII). Thrombin helps activate FXIII by catalyzing hydrolysis of the FXIII activation peptides (AP). In the current work, the role of exosites in the ternary thrombin-FXIII-fibrin(ogen) complex was further explored. Hydrolysis studies indicate that thrombin predominantly utilizes its active site region to bind extended Factor XIII AP (FXIII AP 33-64 and 28-56) leaving the anion-binding exosites for fibrin(ogen) binding. The presence of fibrin-I leads to improvements in the K(m) for hydrolysis of FXIII AP (28-41), whereas peptides based on the cardioprotective FXIII V34L sequence exhibit less reliance on this cofactor. Surface plasmon resonance measurements reveal that d-Phe-Pro-Arg-chloromethylketone-thrombin binds to fibrinogen faster than to FXIII a(2) and dissociates from fibrinogen more slowly than from FXIII a(2). This system of thrombin exosite interactions with differing affinities promotes efficient clot formation.     

Fibrinogen Manchester. Detection of a heterozygous phenotype in the intraplatelet pool.

Family members heterozygous for the congenitally abnormal fibrinogen designated fibrinogen Manchester, A alpha 16Arg----His, have previously been shown by h.p.l.c. and amino acid analysis to release a variant fibrinopeptide, [His16]fibrinopeptide A, from plasma fibrinogen after the addition of thrombin. The present study was designed to determine if the same abnormal phenotype was also present in the intraplatelet fibrinogen pool. Fresh platelets were washed in buffers containing EDTA until it could be shown that all washable plasma fibrinogen was removed. Normal platelets were then lysed by freezing and thawing to release their intracellular proteins, which were then treated with thrombin. The fibrinopeptides, cleaved from the intraplatelet fibrinogen, could be detected by an optimized h.p.l.c. technique. Quantification of the intraplatelet fibrinogen gave a result (means +/- S.D., n = 5) of 110 +/- 30 and 90 +/- 30 micrograms/10(9) platelets, when determined by h.p.l.c. quantification of fibrinopeptide B content and fibrinogen fragment E radioimmunoassay respectively. Examination of fibrinopeptides released from the platelet fibrinogen from the family with fibrinogen Manchester with the same techniques showed elution peaks in the same positions as both [His16]fibrinopeptide A and normal fibrinopeptide A. The identity of these peaks was further substantiated by analysis of the h.p.l.c. peaks by using specific radioimmunoassay to fibrinopeptide A. Our results therefore demonstrate that platelet fibrinogen expresses the heterozygous A alpha 16His phenotype. This supports the view that the A alpha chains of platelet and plasma fibrinogen are produced from a single genetic locus.     

Differences in the Subunit Structure of Human Fibrin formed by the Action of Arvin,Reptilase and Thrombin

INTEREST has focused recently on the clinical use of proteolytic enzymes similar in properties to thrombin which can directly cleave fibrinogen. Potentially the most important are arvin, derived from the venom of Agkistrodon rhodostoma and reptilase, isolated from the venom of Bothrops atrox. These only release fibrinopeptide A from fibrinogen^1–3, whereas thrombin cleaves fibrinopeptides A and B from fibrinogen to form fibrin. Thrombin also activates fibrin stabilizing factor (FSF) which introduces amide bonds between the subunits of soluble fibrin⁴. FSF rapidly forms covalent links between pairs of γ(C)-chains giving γ(C)-dimers and in a slower reaction α(A)-chains are linked to produce high molecular weight polymers⁵. Although reptilase, like thrombin, activates FSF⁶, arvin apparently does not, which would explain why the fibrin formed by arvin seems to be more friable than that produced by thrombin or reptilase⁷.     

Thrombin-induced fibrinopeptide B release from normal and variant fibrinogens: influence of inhibitors of fibrin polymerization

Thrombin preferentially cleaves fibrinopeptides A (FPA) from fibrinogen resulting in the formation of desAA-fibrin from which most of the fibrinopeptides B (FPB) are then released with an enhanced rate. Kinetics of fibrinopeptide release from normal and dysfunctional fibrinogens were investigated in order to further characterize the mechanism of accelerated FPB release during desAA-fibrin polymerization. Dysfunctional fibrinogens London I and Ashford, exhibiting primary polymerization abnormalities (i.e., an abnormality present when all fibrinopeptides have been cleaved), which in the case of fibrinogen London I is believed to be caused by a defect in the D-domain, were shown to exhibit a decreased rate of FPB release compared with normal fibrinogen. While Gly-Pro-Arg-Pro, an inhibitor of fibrin polymerization, was shown to decrease the rate of FPB release from normal fibrinogen by a factor of 5, normal fragment D1, although inhibiting clot formation of normal fibrinogen, did not influence the acceleration of FPB release. On the other hand, the presence of fragment D1 did not enhance FPB release from fibrinogen London I, suggesting that interaction of D-domains in functional isolation with desAA-fibrin E-domains is not sufficient to enhance FPB release. Although clot formation was inhibited by the concentrations of fragment D1 used, the formation of small desAA-fibrin oligomers was hardly affected. Thus, small fibrin polymers, but not desAA-fibrin monomers, act as optimal substrates for the release of FPB by thrombin.     

Characterization of the fibrin polymer structure that accelerates thrombin cleavage of plasma factor XIII

The effect of plasmin-derived fibrin(ogen) degradation products on alpha-thrombin cleavage of plasma Factor XIII was studied to identify the fibrin polymer structure that promotes Factor XIIIa formation. Fibrin polymers derived from fibrinogen and Fragment X enhanced the rate of thrombin cleavage of plasma Factor XIII in plasma or buffered solutions. The concentrations of fibrinogen and Fragment X that promoted half-maximal rates of Factor XIIIa formation were 5 and 40 micrograms/ml, respectively. Fragments Y, D, E, D-dimer, and photooxidized fibrinogen did not enhance thrombin cleavage of Factor XIII. Although purified Fragment D1 inhibited fibrin gelation, the soluble protofibrils promoted thrombin activation of Factor XIII. Noncrosslinked fibrin fibers failed to enhance thrombin cleavage of Factor XIII. In conclusion, soluble fibrin oligomers function to promote thrombin cleavage of plasma Factor XIII during blood clotting.     

Recombinant fibrinogen studies reveal that thrombin specificity dictates order of fibrinopeptide release

During cleavage of fibrinogen by thrombin, fibrinopeptide A (FpA) release precedes fibrinopeptide B (FpB) release. To examine the basis for this ordered release, we synthesized A'beta fibrinogen, replacing FpB with a fibrinopeptide A-like peptide, FpA' (G14V). Analyses of fibrinopeptide release from A'beta fibrinogen showed that FpA release and FpA' release were similar; the release of either peptide followed simple first-order kinetics. Specificity constants for FpA and FpA' were similar, demonstrating that these peptides are equally competitive substrates for thrombin. In the presence of Gly-Pro-Arg-Pro, an inhibitor of fibrin polymerization, the rate of FpB release from normal fibrinogen was reduced 3-fold, consistent with previous data; in contrast, the rate of FpA' release from A'beta fibrinogen was unaffected. Thus, with A'beta fibrinogen, fibrinopeptide release from the beta chain is similar to fibrinopeptide release from the alpha chain. We conclude that the ordered release of fibrinopeptides is dictated by the specificity of thrombin for its substrates. We analyzed polymerization, following changes in turbidity, and found that polymerization of A'beta fibrinogen was similar to that of normal fibrinogen. We analyzed clot structure by scanning electron microscopy and found that clots from A'beta fibrinogen were similar to clots from normal fibrinogen. We conclude that premature release of the fibrinopeptide from the N terminus of the beta chain does not affect polymerization of fibrinogen.     

Characterization of the kinetic pathway for liberation of fibrinopeptides during assembly of fibrin

The time dependence of the release of fibrinopeptides from fibrinogen was studied as a function of the concentration of fibrinogen, thrombin, and Gly-Pro-Arg-Pro, an inhibitor of fibrin polymerization. The release of fibrinopeptides during fibrin assembly was shown to be a highly ordered process. Rate constants for individual steps in the formation of fibrin were evaluated at pH 7.4, 37 degrees C, gamma/2 = 0.15. The initial event, thrombin-catalyzed proteolysis at Arg-A alpha 16 to release fibrinopeptide A (kcat/Km = 1.09 X 10(7) M-1s-1) was followed by association of the resulting fibrin I monomers. Association of fibrin I was found to be a reversible process with rate constants of 1 X 10(6) M-1s-1 and 0.064 s-1 for association and dissociation, respectively. Assuming random polymerization of fibrin I monomer, the equilibrium constant for fibrin I association (1.56 X 10(7) M-1) indicates that greater than 80% of the fibrin I protofibrils should contain more than 10 monomeric units at 37 degrees C, pH 7.4, when the fibrin I concentration is 1.0 mg/ml. Association of fibrin I monomers was shown to result in a 6.5-fold increase in the susceptibility of Arg-B beta 14 to thrombin-mediated proteolysis. The 6.5-fold increase in the observed specificity constant from 6.5 X 10(5) M-1s-1 to 4.2 X 10(6) M-1s-1 upon association of fibrin I monomers and the rate constant for fibrin association indicates that most of the fibrinopeptide B is released after association of fibrin I monomers. The interaction between a pair of polymerization sites in fibrin I dimer was found to be weaker than the interaction of fibrin I with Gly-Pro-Arg-Pro and weaker than the interaction of fibrin I with fibrinogen.     

Clotting of fibrinogen. 2. Calorimetry of the reversal of the effect of calcium on clotting with thrombin and with ancrod

When clotting is effected by thrombin in the presence of calcium, the endotherm for the D nodules of fibrinogen broadens significantly and then becomes narrow again, while increasing in size. Clotting effected by the snake venom enzyme Ancrod, which releases only the A fibrinopeptides from the E nodule, shows only the broadening of the D endotherm. Accordingly, significant interactions of the D nodules of fibrinogen become possible only when the B fibrinopeptides of the E nodule are released on clotting. When calcium present during clotting is removed from the fibrin clot with ethylenediaminetetraacetic acid, the endotherm for the D nodules of fibrin shows nearly complete reversal if clotting was effected with Ancrod but appears to be divided into two endotherms if clotting was effected with thrombin. At neutral pH, new endotherms were observed for fibrinogen in the temperature range 105-140 degrees C.     

Interactions of thrombin with fibrinogen adsorbed on methyl-, hydroxyl-, amine-, and carboxyl-terminated self-assembled monolayers

We have examined the initial phase of fibrin formation, thrombin-catalyzed fibrinopeptide cleavage, from adsorbed fibrinogen using surface plasmon resonance and liquid chromatography-mass spectrometry. Fibrinogen adsorption impaired thrombin-fibrinogen interactions compared to the interactions of thrombin with fibrinogen in solution. The properties of the underlying substrate significantly affected the extent and kinetics of fibrinopeptide cleavage, and the conversion of adsorbed fibrinogen to fibrin. Fibrinogen adsorbed on negatively charged surfaces (carboxyl-terminated self-assembled monolayers) released a smaller amount of fibrinopeptides, at a reduced rate relative to those of hydrophobic, hydrophilic, and positively charged surfaces (methyl-, hydroxyl-, and amine-terminated self-assembled monolayers, respectively). Additionally, the conversion of adsorbed fibrinogen to fibrin was comparatively inefficient at the negatively charged surface. These data correlated well with trends previously reported for fibrin proliferation as a function of surface properties. We conclude that thrombin interactions with adsorbed fibrinogen determine the extent of subsequent fibrin proliferation on surfaces.     

Localization of a fibrin polymerization site

The formation of a fibrin clot is initiated after the proteolytic cleavage of fibrinogen by thrombin. The enzyme removes fibrinopeptides A and B and generates fibrin monomer which spontaneously polymerizes. Polymerization appears to occur though the interaction of complementary binding sites on the NH2-terminal and COOH-terminal (Fragment D) regions of the molecule. A peptide has been isolated from the gamma chain remnant of fibrinogen Fragment D1 which has the ability to bind to the NH2-terminal region of fibrinogen as well as to inhibit fibrin monomer polymerization. The peptide reduces the maximum rate and extent of the polymerization of thrombin or batroxobin fibrin monomer and increases the lag time. The D1 peptide does not interact with disulfide knot, fibrinogen, or Fragment D1, but it binds to thrombin-treated disulfide knot with a Kd of 1.45 X 10(-6) M at approximately two binding sites per molecule of disulfide knot. Fibrin monomer formed either by thrombin or batroxobin binds approximately two molecules of D1 peptide per molecule of fibrin monomer, indicating that the complementary site is revealed by the loss of fibrinopeptide A. The NH2-terminal sequence (Thr-Arg-Trp) and COOH-terminal sequence (Ala-Gly-Asp-Val) of the D1 peptide were determined. Therefore the gamma 373-410 region of fibrinogen contains a polymerization site which is complementary to the thrombin-activated site on the NH2-terminal region of fibrinogen.     

Batroxobin Binds Fibrin with Higher Affinity and Promotes Clot Expansion to a Greater Extent than Thrombin

Batroxobin is a thrombin-like serine protease from the venom of Bothrops atrox moojeni that clots fibrinogen. In contrast to thrombin, which releases fibrinopeptide A and B from the NH₂-terminal domains of the Aα- and Bβ-chains of fibrinogen, respectively, batroxobin only releases fibrinopeptide A. Because the mechanism responsible for these differences is unknown, we compared the interactions of batroxobin and thrombin with the predominant γ_A/γ_A isoform of fibrin(ogen) and the γ_A/γ′ variant with an extended γ-chain. Thrombin binds to the γ′-chain and forms a higher affinity interaction with γ_A/γ′-fibrin(ogen) than γ_A/γ_A-fibrin(ogen). In contrast, batroxobin binds both fibrin(ogen) isoforms with similar high affinity (K_d values of about 0.5 μm) even though it does not interact with the γ′-chain. The batroxobin-binding sites on fibrin(ogen) only partially overlap with those of thrombin because thrombin attenuates, but does not abrogate, the interaction of γ_A/γ_A-fibrinogen with batroxobin. Furthermore, although both thrombin and batroxobin bind to the central E-region of fibrinogen with a K_d value of 2–5 μm, the α(17–51) and Bβ(1–42) regions bind thrombin but not batroxobin. Once bound to fibrin, the capacity of batroxobin to promote fibrin accretion is 18-fold greater than that of thrombin, a finding that may explain the microvascular thrombosis that complicates envenomation by B. atrox moojeni. Therefore, batroxobin binds fibrin(ogen) in a manner distinct from thrombin, which may contribute to its higher affinity interaction, selective fibrinopeptide A release, and prothrombotic properties.     

Fibrin assembly after fibrinopeptide A release in model systems and human plasma studied with magnetic birefringence.

Magnetically induced birefringence was used to monitor fibrin polymerization after the release of the small negatively charged A fibrinopeptides from human fibrinogen by the action of the snake-venom-derived enzymes reptilase and ancrod. A range of conditions was investigated. Fibrin polymerization in solutions of purified fibrinogen shows a distinct break near the gelation point. On addition of Ca2+ or albumin the lag period is shortened, fibre thickness is increased and the break in assembly almost vanishes, probably because both of these additives promote lateral aggregation. There are minor differences in the kinetics, depending on the venom enzyme used. The kinetics of fibrin assembly in model systems containing either Ca2+ or albumin and in human plasma with a largely dormant coagulation cascade are very similar. Therefore in the latter condition there is no significant alteration in the assembly process due to interaction between fibrin or the venom enzymes and any of the plasma proteins. When the cascade is activated, the polymerization progress curves have a character that resembles a combination of the reactions observed when the venom enzymes and endogenously generated thrombin separately induce coagulation, except for a region near gelation where, paradoxically, polymerization appears to be slower on activation. The low-angle neutron-diffraction patterns from oriented gels made with thrombin or reptilase are identical. Therefore at low resolution the packing of the monomers within fibres is the same when fibrinopeptide A only or both fibrinopeptides A and B are removed.     

Review of some unusual effects of calcium binding to fibrinogen

Calcium binding curves of human and bovine fibrinogen were obtained by using a calcium sensitive electrode. The two were identical and showed 2 high, 2-3 medium and more than 15 low affinity sites. Differential scanning calorimetry at neutral pH demonstrated the presence of the D and E domains of fibrinogen; however, at pH 3.5 the D-domain was split into two. The presence of the subdomains was demonstrated also by digestion by pepsin at this pH. Combination of digestion of fibrinogen and of its fragments with different enzymes and temperatures identified up to 12 subdomains in the original molecule. Clotting of fibrinogen by thrombin at pH 7.0 was investigated also by differential scanning calorimetry. In the absence of Ca2+ clotting elicited a 40% increase in the enthalpy of thermal denaturation of the D domain of fibrinogen, but the position of the peak increased only by 0.4 degrees C. However, with clotting in the presence of 10(-3) M calcium the former increased by 70-75% and the latter by 11.0 degrees C, while these parameters of the E-domain remained unchanged. Changes of bound calcium during clotting were also measured with the calcium sensitive electrode. These had to be corrected, because the drop in free calcium was partly compensated by release of some calcium that was already bound to fibrinogen. Log of the half time of calcium uptake plotted against log thrombin concentration indicated a first order process with respect to thrombin concentration, moreover, the rate determined corresponded to that of the conformation change measured by calorimetry. The calcium uptake was correlated with release of the fibrinopeptides. Release of fibrinopeptide B follows parallel to binding of calcium and that of fibrinopeptide A is about fourfold faster. Polymerization and formation of thick bundles of fibrin is connected with release of fibrinopeptide A. Clotting with Ancrod, an enzyme that releases only fibrinopeptide A, showed only minimal binding of calcium. The polymerization inhibiting tetrapeptide Gly-Pro-Arg-Pro also depressed binding of calcium. These data suggest that a calcium-binding site must be in the proximity of the site of release of fibrinopeptide B and of a polymerization site.     

Preparation of fibrin des-AA by thrombin

The active thrombin is formed in the blood stream when the blood coagulation system is activated. It attacks fibrinogen, splits off two fibrinopeptides A and fibrinogen is transformed into des-AA fibrin which is able to polymerize spontaneously forming protofibrils. At high thrombin concentration the enzyme splits off two fibrinopeptides B and des-AA fibrin units are transformed into des-AABB fibrin. These two forms of fibrin are widely used in the biological experiments. However des-AA fibrin is obtained usually from fibrinogen using the snake poisons (such as reptilase). Des-AA fibrin was obtained also by physiological enzyme thrombin, but that des-AA fibrin samples had the contamination of des-AABB fibrin. At the present paper we have described the method of the des-AA fibrin preparation by thrombin without any contamination of des-AABB fibrin.     

Assembly of fibrin. A light scattering study.

Using stopped flow light scattering, we show that assembly of fibrin following activation with non-rate-limiting amounts of thrombin or reptilase occurs in two steps, of which the first is end-to-end polymerization of fibrin monomers to protofibrils and the second is lateral association of protofibrils to fibers, in agreement with Ferry's original proposal. Polymerization is found to proceed as a bimolecular association of bifunctional monomers; the overall rate varies as the inverse first power of the concentration; end-to-end association of two monomers, of a monomer and an oligomer, and of two oligomers occurs with the same rate constant. The value of the rate constant is 8.2 C 10(5) M-1 s-1 in 0.5 M NaCl, is three times larger in 0.1 M NaCl (0.05 M Tris, pH 7.4), and is the same following activation by reptilase and by thrombin. The onset of growth of fibers from protofibrils takes 12 times longer in 0.5 than in 0.1 M salt, i.e. thick fibers ("coarse" gels) form from short protofibrils, and thin fibers ("fine" gels) form from longer protofibrils. Jumps of salt concentration at times when protofibrils, but not fibers, have formed result in immediate growth of thick fibers at low salt from long protofibrils formed at high salt. The rate of fiber growth in these experiments varies as the inverse first power of the concentration. 3the instant of gelation (formation of a network of fibers) falls in the later half of the time during which the scattering rises due to fiber growth; the rise of gel rigidity after gelation is found to continue beyond the end of this period. Jumps from low to high salt result in retention of whatever fibers have formed at low salt and a very small additional increase of the scattering due to further fiber growth at high salt. From a variety of evidence, we conclude that the properties of fibrin are determined by kinetics and not equilibria of assembly steps. Results obtained here agree with the following scheme of fibrin assembly: monomers polymerize to protofibrils; long protofibrils associate laterally to fibers; occasionally a long protofibril associates with two different fibers to form an interfiber connection; fiber growth does not reverse to yield stabler, more compact, structures and terminates in formation of a network of fibers. The typical delay of fiber growth is the time during which protofibrils form from monomers. Measurements at rate-limiting concentrations of thrombin have allowed estimation of turnover rates of fibrinopeptides that agree with kinetic parameters obtained with direct assay of fibrinopeptide. Release of fibrinopeptide B causes more rapid fiber formation. Addition of thrombin after activation by reptilase, at a time when protofibrils, but not fibers, have formed, is followed rapidly by fiber formation; this proves that thrombin readily removes fibrinopeptide B from protofibrils. On the basis of these new results and earlier work (in particular, Blomb?ck, B., Hessel, B., Hogg, D., and Therkildsen, L...