New applications for an old lignified element staining reagent

The use is reported of Mirande's reagent in epifluorescence microscopy which permits a clear distinction between cellulosic and lignified tissues. Homogeneous Prespermatophytae and gymnosperm xylem appeared entirely green with Mirande's reagent under ultraviolet excitation, whereas heteroxyled angiosperm wood showed a mixed pink and blue–green colour. This coloration was due to the fluorescence of cellulose, since certain elements in dicotyledonous wood (parenchyma, fibres, xylem rays) are not entirely lignified. Monocotyledonous (Poaceae) lignin showed an intense blue fluorescence due to hydroxycinnamic acids bound to the cell wall.The method showed that lignification occurs first in the middle lamella, and later in the secondary wall of xylem cells. In addition, this staining technique proved useful in the study of lignin and suberin deposition in response to various stress factors.     

Lignification in the flax stem: evidence for an unusual lignin in bast fibers

In the context of our research on cell wall formation and maturation in flax (Linum usitatissimum L) bast fibers, we (1) confirmed the presence of lignin in bast fibers and (2) quantified and characterized the chemical nature of this lignin at two developmental stages. Histochemical methods (Weisner and Maüle reagents and KMnO₄-staining) indicating the presence of lignin in bast fibers at the light and electron microscope levels were confirmed by chemical analyses (acetyl bromide). In general, the lignin content in flax bast fibers varied between 1.5% and 4.2% of the dry cell wall residues (CWRs) as compared to values varying between 23.7% and 31.4% in flax xylem tissues. Immunological and chemical analyses (thioacidolysis and nitrobenzene oxidation) indicated that both flax xylem- and bast fiber-lignins were rich in guaiacyl (G) units with S/G values inferior to 0.5. In bast fibers, the highly sensitive immunological probes allowed the detection of condensed guaiacyl-type (G) lignins in the middle lamella, cell wall junctions, and in the S1 layer of the secondary wall. In addition, lower quantities of mixed guaiacyl–syringyl (GS) lignins could be detected throughout the secondary cell wall. Chemical analyses suggested that flax bast-fiber lignin is more condensed than the corresponding xylem lignin. In addition, H units represented up to 25% of the monomers released from bast-fiber lignin as opposed to a value of 1% for the corresponding xylem tissue. Such an observation indicates that the structure of flax bast-fiber lignin is significantly different from that of the more typical woody plant lignin, thereby suggesting that flax bast fibers represent an interesting system for studying an unusual lignification process.     

Structural Characterization of Modified Lignin in Transgenic Tobacco Plants in Which the Activity of 4-Coumarate:Coenzyme A Ligase Is Depressed

Transgenic tobacco (Nicotiana tabacum L.) plants in which the activity of 4-coumarate:coenzyme A ligase is very low contain a novel lignin in their xylem. Details of changes in hydroxycinnamic acids bound to cell walls and in the structure of the novel lignin were identified by base hydrolysis, alkaline nitrobenzene oxidation, pyrolysis-gas chromatography, and 13C-nuclear magnetic resonance analysis. In the brownish tissue of the transgenic plants, the levels of three hydroxycinnamic acids, p-coumaric, ferulic, and sinapic, which were bound to cell walls, were apparently increased as a result of down-regulation of the expression of the gene for 4-coumarate:coenzyme A ligase. Some of these hydroxycinnamic acids were linked to cell walls via ester and ether linkages. The accumulation of hydroxycinnamic acids also induced an increase in the level of condensed units in the novel lignin of the brownish tissue. Our data indicate that the behavior of some of the incorporated hydroxycinnamic acids resembles lignin monomers in the brownish tissue, and their accumulation results in dramatic changes in the biosynthesis of lignin in transgenic plants.     

The Mechanical Properties of Xylem Tissue from Tobacco Plants (Nicotiana tabacum'Samsun')

Tobacco plants (Nicotiana tabacum‘Samsun’) havebeen grown with an antisense CAD (cinnamyl alcohol dehydrogenase)gene. This modifies lignin production, resulting in lignin witha greater aldehyde content which is easier to extract chemically.This lignin probably has a reduced crosslink density. The changedproperties of the lignin affect the longitudinal tensile modulusof the xylem tissue (wood), reducing it by one third, from 2.8GPa to 1.9 GPa. Tobacco xylem tissue cell walls are more sensitiveto changes in the properties of the matrix than can be predictedusing current cell wall mechanical models.Copyright 1998 Annalsof Botany Company Tobacco,Nicotiana tabacum, xylem tissue, Young's modulus, matrix polymer connectivity, plant biomechanics.     

Localization of dibenzodioxocin substructures in lignifying Norway spruce xylem by transmission electron microscopy–immunogold labeling

The lignification process in mature Norway spruce [Picea abies (L.) H. Karsten] xylem cell walls was studied using transmission electron microscopy (TEM)–immunogold detection with a polyclonal antibody raised against a specific lignin substructure, dibenzodioxocin. The study reveals for the first time the exact location of this abundant eight-ring structure in the cell wall layers of wood. Spruce wood samples were collected in Southern Finland at the time of active growth and lignification of the xylem cell walls. In very young tracheids where secondary cell wall layers were not yet formed, the presence of the dibenzodioxocin structure could not be shown at all. During secondary cell wall thickening, the dibenzodioxocin structure was more abundant in the secondary cell wall layers than in the middle lamella. The highest number of gold particles revealing dibenzodioxocin was in the S2+S3 layer. Statistically significant differences were found in the frequency of gold particles present in various cell wall layers. For comparison, wood sections were also cut with a cryomicrotome for light and fluorescence microscopy.     

Topochemical studies on modified lignin distribution in the xylem of Poplar (Populus spp.) after wounding

BACKGROUND AND AIMS: Information on the influence of wounding on lignin synthesis and distribution in differentiating xylem tissue is still scarce. The present paper provides information on cell modifications with regard to wall ultrastructure and lignin distribution on cellular and subcellular levels in poplar after wounding. METHODS: Xylem of Populus spp. close to a wound was collected and processed for light microscopy, transmission electron microscopy and cellular UV microspectrophotometry. Cell wall modification with respect to lignin distribution was examined at different stages of wound tissue development. Scanning UV microspectrophotometry and point measurements were used to determine the lignin distribution. KEY RESULTS: Xylem fibres within a transition zone between differentiated xylem laid down prior to wounding and the tissues formed after wounding developed distinctively thickened secondary cell walls. Those modified walls and cell corners showed, on average, a higher lignin content and an inhomogeneous lignin distribution within the individual wall layers. CONCLUSIONS: The work presented shows that wounding of the xylem may induce a modified wall architecture and lignin distribution in tissues differentiating at the time of wounding. An increasing lignin content and distinctively thickened walls can contribute to improved resistance as part of the compartmentalization process.     

Modelling the Mechanical Properties of Xylem Tissue from Tobacco Plants (Nicotiana tabacum'Samsun') by Considering the Importance of Molecular and Micromechanisms

Tobacco plants (Nicotiana tabacum‘Samsun’) havexylem cell walls which are more sensitive to changes in theproperties of the matrix than was predicted using current cellwall mechanical models. A model is proposed which can accountfor the importance of the cell wall matrix in determining themodulus of the material. This model is based on a helical springsystem, with micromechanisms operating at the molecular scale.Xylem tissue fibre cells can behave as helical springs whenthe crosslink density of lignin is low, or they can behave likea composite sheet with fibres at an angle to the applied loadwhen the crosslink density is high. This highlights the importanceof molecular modelling when the properties of complex biologicalmaterials are being investigated.Copyright 1998 Annals of BotanyCompany Tobacco,Nicotiana tabacum, xylem tissue, Young's modulus, matrix polymer connectivity, plant biomechanics.     

Fibres and Fibre-sclereids in Wild-typeArabidopsis thaliana

Examination of the fibre system in roots and shoots ofArabidopsisthaliana(L.) Heynh. revealed three types of fibres, distinguishedaccording to their site of differentiation: (1) short fibre-sclereidsin the secondary phloem of roots and shoots at the rosette level;(2) long fibres in the secondary xylem of the main root; and(3) very long fibres in the xylem of the inflorescence stems.These three types are in addition to the small number of primaryphloem fibres that are formed even in smallA. thalianaindividuals.These findings provide a basis for the use ofArabidopsis thalianaasa model system to study the processes leading to fibre differentiationin dicotyledons. Arabidopsis thaliana; differentiation; fibre-sclereids; inflorescences; phloem fibres; xylem     

Secondary xylem-specific expression of caffeoyl-coenzyme A 3-O-methyltransferase plays an important role in the methylation pathway associated with lignin biosynthesis in loblolly pine

Two types of structurally distinct O-methyltransferases mediate the methylation of hydroxylated monomeric lignin precursors in angiosperms. Caffeate 3-O-methyltransferase (COMT; EC 2.1.1.68) methylates the free acids and caffeoyl CoA 3-O-methyltransferase (CCoAOMT; EC 2.1.1.104) methylates coenzyme A esters. Recently, we reported a novel hydroxycinnamic acid/hydroxycinnamoyl CoA ester O-methyltransferase (AEOMT) from loblolly pine differentiating xylem that was capable of methylating both acid and ester precursors with similar efficiency. In order to determine the possible existence and role of CCoAOMT in lignin biosynthesis in gymnosperms, a 1.3 kb CCoAOMT cDNA was isolated from loblolly pine that showed 79–82% amino acid sequence identity with many angiosperm CCoAOMTs. The recombinant CCoAOMT expressed in Escherichia coli exhibited a significant methylating activity with hydroxycinnamoyl CoA esters whereas activity with hydroxycinnamic acids was insignificant. Moreover, 3.2 times higher catalytic efficiency for methylating caffeoyl CoA over 5-hydroxyferuloyl CoA was observed which could serve as a driving force towards synthesis of guaiacyl lignin. The secondary xylem-specific expression of CCoAOMT was demonstrated using RNA blot analysis, western blot analysis, and O-methyltransferase enzyme assays. In addition, Southern blot analysis indicated that CCoAOMT may exist as a single-copy gene in loblolly pine genome. The transgenic tobacco plants carrying loblolly pine CCoAOMT promoter-GUS fusion localized the site of GUS activity at the secondary xylem tissues. These data suggest that CCoAOMT, in addition to AEOMT, plays an important role in the methylation pathway associated with lignin biosynthesis in loblolly pine.     

Lignin deficiency in transgenic flax resulted in plants with improved mechanical properties

Flax (Linum usitatissimum L.) is a very important source of natural fibres used by the textile industry. Flax fibres are called lignocellulosic, because they contain mainly cellulose (about 70%), with hemicellulose, pectin and lignin. Lignin is a three-dimensional polymer with a high molecular weight, and it gives rigidity and mechanical resistance to the fibre and plant. Its presence means the fibres have worse elastic properties than non-lignocellulosic fibres, e.g. cotton fibres, which contain no lignin. The main aim of this study was to produce low-lignin flax plants with fibres with modified elastic properties. An improvement in the mechanical properties was expected. The used strategy for CAD down-regulation was based on gene silencing RNAi technology. Manipulation of the CAD gene caused changes in enzyme activity, lignin content and in the composition of the cell wall in the transgenic plants. The detected reduction in the lignin level in the CAD-deficient plants resulted in improved mechanical properties. Young's modulus was up to 75% higher in the generated transgenic plants (CAD33) relative to the control plants. A significant increase in the lignin precursor contents and a reduction in the pectin and hemicellulose constituents was also detected. A decrease in pectin and hemicellulose, as well as a lower lignin content, might lead to improved extractability of the fibres. However, the resistance of the transgenic lines to Fusarium oxysporum was over two-fold lower than for the non-transformed plants. Since Fusarium species are used as retting organisms and had been isolated from retted flax, the increased sensitivity of the CAD-deficient plant to F. oxysporum infection might lead to improved flax retting.     

Caffeoyl coenzyme A O-methyltransferase down-regulation is associated with modifications in lignin and cell-wall architecture in flax secondary xylem

Caffeoyl coenzyme A O-methyltransferase (CCoAOMT, EC 2.1.1.104) down-regulated-flax (Linum usitatissimum) plants were generated using an antisense strategy and functionally characterized. Chemical analyses (acetyl bromide and thioacidolysis) revealed that the lignin quantity was reduced and that the Syringyl/Guaïacyl (S/G) lignin monomer ratio was modified in the non-condensed lignin fraction of two independent down-regulated lines. These modifications were associated with altered xylem organization (both lines), reduced cell-wall thickness (one line) and the appearance of an irregular xylem (irx) phenotype (both lines). In addition UV microspectroscopy also indicated that CCoAOMT down-regulation induced changes in xylem cell-wall structure and the lignin fractions. Microscopic examination also suggested that CCoAOMT down-regulation could influence individual xylem cell size and identity. As a first step towards investigating the cellular mechanisms responsible for the unusual structure of flax lignin (G-rich, condensed), recombinant flax CCoAOMT protein was produced and its affinity for different potential substrates evaluated. Results indicated that the preferred substrate was caffeoyl coenzyme A, followed by 5-hydroxyconiferaldehyde suggesting that flax CCoAOMT possesses a small, but probably significant 5′ methylating activity, in addition to a more usual 3′ methylating activity.     

Correlation between the distribution of lignin and pectin and distribution of sorbed metal ions (lead and zinc) on coir (Cocos nucifera L.)

Plant fibres are capacious for sorption of metal ions, and can be used in water cleaning. Knowledge about the sorption will help in selection of the fibre and optimisation of its chemical modification, if any. The aim of this paper is to investigate the connection, if any, between the distribution of lignin and pectin and the loading of Pb and Zn on coir (mesocarp fibres from Cocos nucifera L.). The coir consisted mainly of xylem and a fibre sheath. The lignin was evenly distributed in the cell walls of the fibre sheath, but in the xylem, there was no detectable content in the compound middle lamella, and a smaller content of lignin in the secondary walls than in the walls of the fibre sheath. The only detectable content of pectin in the fibre sheath walls was in the middle lamella, cell corners and extracellular matrix, while in the xylem, the pectin was almost evenly distributed in the wall, with a higher concentration in the middle lamella and cell corners. All cell walls facing the lacuna had a high content of pectin. The metal ions were mainly loaded on the xylem and cell walls facing the lacuna, maybe with an additional trend to be loaded on the large fibres. Lead was distributed on and across the whole secondary wall. Zinc was loaded on the secondary walls, but there was no information about the distribution across the wall. If there is a simple correlation between the loading of metal ions and the distribution of lignin or pectin, these investigations point at no correlation with lignin and a positive correlation with pectin. It has to be stressed that these conclusions are made on limited material and are therefore preliminary in nature.     

Bonding of hydroxycinnamic acids to lignin: ferulic and p-coumaric acids are predominantly linked at the benzyl position of lignin, not the beta-position, in grass cell walls.

A suspension in dichloromethane-water (18:1, v/v) of various fractions containing hydroxycinnamic acid ester-ether bridges between lignin and polysaccharides prepared from cell walls of matured oat (Avena sativa L.) intemodes, and a solution of their acetates in the same solvent, were treated with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). This reagent selectively cleaves benzyl ether and ester linkages of negatively charged aromatic nuclei. The sample treated with DDQ was directly hydrolysed either under mild (1 M NaOH, overnight at 37 degrees C) or severe (4 M NaOH, for 2 h at 170 degrees C) conditions. The hydroxycinnamic acids released in the hydrolysate were methylated with diazomethane and analysed quantitatively using gas chromatography. Significant portions of ether linkages between hydroxycinnamic acids and lignin were cleaved with DDQ, which suggests that most of the hydroxycinnamic acids were ether-linked at the benzyl position, and not the beta-position, of the lignin side chain as previously claimed.     

Changes in phenolic acids during maturation and lignification of scots pine xylem

The content and fractional composition of alcohol soluble phenolic acids (PhA) in cells with different degree maturation and lignification in the course of early and late wood formation in the pine (Pinus sylvestris L.) stem during vegetation were studied. Phenolic compounds (PhC), extracted by 80% ethanol, were divided into free and bound fractions of PhA. In turn, the esters and ethers were isolated from bound PhA. The contents of all substances were calculated per dry weight and per cell. Considerable differences have been found to exist in both the contents and the composition of the fractions PhA on successive stages of tracheid maturation of early and late xylem. Early wood tracheids at all secondary wall thickening steps contained PhC less and free PhA more than late wood tracheids. Throughout earlywood tracheid maturation, the pool of free PhA per cell declined at the beginning of lignification and then increased gradually while that of bound PhA decreased. The maturation of late wood tracheids were accompanied by the rise of free PhA pool and the diminution of bound PhA pool. In the composition of bound PhA, the ethers were always dominant, and the amount of that in earlywood cells was less than in latewood cells. The cells of early xylem at all steps of maturation contained more of esters. The sum total of free hydroxycinnamic acids, precursors of monolignols, gradually decreased during early xylem lignification as the result of the reduction of the pools of p-coumaric, caffeic, ferulic and synapic acids, while that of their esters rised. In the course of late xylem lignification, the pools of free p-coumaric, ferulic and, especially, synapic acids increased. Simultaneously, the amount of ferulic acid ester and synapic acid ether increased too. According to the data, lignin biosynthesis in early xylem and late xylem occurs with different dynamics and the structure of lignins of two xylem types might be different too.     

The Differentiation of Contact Cells and Isolation Cells in the Xylem Ray Parenchyma of Populus maximowiczii

A histochemical analysis was made of the differentiation ofcontact cells and isolation cells in the xylem ray parenchymaof Populus maximowiczii. The contact cells formed secondarywalls at approximately the same time as adjoining vessel elements.The lignification of the cell walls of contact cells and vesselelements began earlier than that of wood fibres and isolationcells. Thus, the formation of the secondary wall, includinglignification, of the contact cells might occur at the sametime as that of the vessel elements to which they are directlyconnected. By contrast, the isolation cells began to form secondarywalls later than the vessel elements and wood fibres in thevicinity of the isolation cells. After the deposition of thesecondary wall, a protective layer was formed in contact cellsbut no isotropic layer was observed in isolation cells. Theresults suggest the importance of vessel elements in the determinationof the differentiation of adjoining ray parenchyma cells.Copyright1999 Annals of Botany Company Contact cell, isolation cell, vessel element, xylem differentiation, Populus maximowiczii Henry.     

A Cytochemical Study of Differentiation and Breakdown of Vessel End Walls

A cytochemical approach was used to study the architecture ofthe end wall and its modifications during vessel differentiationin Populus italica and Dianthus caryophyllus. The combinationof cytochemical techniques with selective extractions to removeend wall subunits provides information on the different componentsof the end wall and on the method of perforation. The end wallappears to be formed mainly from pectins and hemicelluloses.No cellulosic components nor lignin were found though the 3,3'-diaminobenzidine assay revealed the presence of peroxidases.That the method of perforation may depend on the species isdiscussed. Dianthus caryophyllus L., carnation, Populus italica, poplar, xylem vessel, cell wall, cytochemistry, vessel differentiation     

Wheat cells accumulate a syringyl-rich lignin during the hypersensitive resistance response

The stem rust fungus Puccinia graminis f.sp. tritici is an obligately biotrophic pathogen attacking wheat (Triticum aestivum). In compatible host/pathogen-interactions, the fungus participates in the host's metabolism by establishing functional haustoria in the susceptible plant cells. In highly resistant wheat cultivars, fungal attack is stopped by a hypersensitive response of penetrated host cells. This mechanism of programmed cell death of single plant cells is accompanied by the intracellular accumulation of material with UV-fluorescence typical of phenolic compounds. A similar reaction can be induced in healthy wheat leaves by the application of a rust-derived elicitor. We analysed the biochemical composition of this defense-induced phenolic material. Contents of total soluble and cell wall esterified and etherified phenolic acids were determined in rust-inoculated and elicitor-treated leaves of the fully susceptible wheat cultivar Prelude and its highly resistant, near-isogenic line Prelude-Sr5. While no resistance-related changes occured in any of these fractions, the lignin content as determined by the thioglycolic acid and the acetyl bromide methods increased after elicitor treatment. Nitrobenzene oxidation revealed that the entire increase can be explained by an increase in syringyl units only. These biochemical data were confirmed by fluorescence emission spectra analyses which indicated a defense-induced enrichment of syringyl lignin for cell wall samples both from elicitor-treated wheat leaves and single host cells undergoing a hypersensitive response upon fungal penetration.     

In situ analysis of lignins in transgenic tobacco reveals a differential impact of individual transformations on the spatial patterns of lignin deposition at the cellular and subcellular levels

Using tobacco transgenic lines altered in the monolignol biosynthetic pathway and which differ in their lignin profiles we have evaluated lignin deposition at the cellular and subcellular levels using several microanalytical techniques. Surprisingly, whereas a Cinnamoyl CoA reductase (CCR) down-regulated line with a strong decrease in lignin content exhibited an overall reduction in lignin deposition in the walls of the different xylem cell types, this reduction was selectively targeted to the fibers in a double transformant (down-regulated for both CCR and Cinnamyl alcohol dehydrogenase (CAD)) displaying a similar degree of global lignin content decrease. Fiber and vessel secondary walls of the transgenic tobacco line homozygous for the ccr antisense gene (CCR.H) down-regulated plants were dramatically destructured, particularly in the S2 sublayer, whereas the deposition of lignins in the S1 sublayer was not significantly modified. In contrast, cell wall organization was slightly altered in xylem cells of the double transformant. The relative distribution of non-condensed and condensed units in lignin, evaluated microscopically with specific antibodies, was differentially affected in the transgenics studied and, in a general way, a drop in non-condensed lignin units (beta- 0-4 interunit linkages) was associated with a loss of cohesion and extensive disorganization of the secondary wall. These results demonstrate that lignification is tightly and independently regulated in individual cell types and cell wall sublayers. They also show that down-regulation of specific genes may induce targeted changes in lignin structure and in spatial deposition patterns of the polymer.