Synthesis and structural diversity of 2-pyridylmethylideneamine complexes of zinc(II) chloride

The addition reactions of zinc(II) chloride to N-substituted pyridine-2-carbaldimines [Py-CHNR, R = Me (1a), Ph (1b), Bz (1c), allyl (1d)] lead to different complexes dependent on the N-bound substituent R. The 1:1 complexes show molecular structures of the type [(Py-CHNR)ZnCl₂] for R = methyl (2a), phenyl (2b), and allyl (2d) with a distorted tetrahedral environment for the zinc atom. The zinc complex with the N-methylated pyridine-2-carbaldimine also forms a dimer of the type [(Py-CHNR)ZnCl₂]₂ (2a)₂ with a square pyramidal coordination sphere of zinc. A 3:2 stoichiometry is observed for R = benzyl and an ion pair of the type [Zn(Py-CHNR)₃]²⁺ [ZnCl₄]²⁻ (2c) is found in the solid state.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Reactivity of alkynyl Pd(II) azido complexes toward organic isocyanides, isothiocyanates, and nitriles

Alkynyl Pd(II) azido complexes of the type [Pd(N₃)(CCR)L₂] (1-3) were obtained by reactions of aqueous NaN₃ with [Pd(Cl)(CCR)L₂] (R = Ph or C(O)OMe). Treating compounds 1-3 with organic isocyanides (R-NC) afforded novel complexes, trans-[Pd(CCPh)(NCNR)(PMe₃)₂] (R = 2,6-Me₂C₆H₃ (4) or 2,6-Et₂C₆H₃ (5)) and trans-[Pd(CCR)(CN₄-t-Bu)L₂] (6: L = PMe₃, R = Ph; 7: L = PEt₃, R = C(O)OMe; 8: L = PMe₃, R = C(O)OMe), which contain either a carbodiimido or a C-coordinated tetrazolato group. Reactions of compounds 1 and 2 with R-NCS (R = 2,6-Me₂C₆H₃ or CH₂CH₃) and 1,4-phenylene diisothiocyanate (C₆H₄(NCS)₂) smoothly proceeded to give tetrazole-thiolato complexes, trans-[Pd(CCPh)(SCN₄-R)L₂] (L = PMe₃, R = Et (9) or 2,6-Me₂C₆H₃ (10); L = PEt₃, R = 2,6-Me₂C₆H₃ (11)), and a phenylene-bridged dinuclear Pd(II) tetrazole-thiolato complex, [(PEt₃)₂(CCPh)Pd(SCN₄-(μ-C₆H₄)-SCN₄)Pd(CCPh)(PEt₃)₂] (12), respectively. Complexes 9-12 contain the Pd-S bond that is formed by the dipolar cycloaddition of the organic isothiocyanate to the Pd-azido bond. In contrast, the corresponding reactions of compounds 1and 2 with C₆F₅CN and Me₃SiCN (organic nitriles, R-CN) gave an N-coordinated Pd(II)-tetrazolato compound {trans-[Pd(CCPh)(N₄C-C₆F₅)(PMe₃)₂] (13)} and a mixture of Pd(II)-cyano complexes {trans-[Pd(CCPh)(CN)(PEt₃)₂] (14) and [Pd(CN)₂(PEt₃)₂] (15)}, respectively. Bis(phosphine) bis(cyano) complexes of Pd and Ni, [M(CN)₂L₂] (L = PEt₃, PMe₃; L₂ = DEPE), could be obtained independently by the reactions of [M(N₃)₂L₂] with excess Me₃SiCN in organic solvents.     

Oxidovanadium(IV) complexes containing ligands derived from dithiocarbazates - Models for the interaction of VO with thiofunctional ligands

The tetragonal-pyramidal VO²⁺ complexes [VO{(RSC-S)N-NX}₂] (1-6) were synthesised by the reactions of VO(OCHMe₂)₃ with the dithiocarbazate ligands RSC(S)-NH-NX, where X = cyclo-pentyl, cyclo-hexyl or 4-Me₂N-C₆H₄-CH, and R = CH₃ or CH₂C₆H₅. The compounds were characterised by elemental analysis, IR- and mass spectrometries, and in cases of compounds 1, 3, 4 and 5, by X-ray diffraction. The chiral compound 4 (X = cyclo-hexyl, R = CH₂C₆H₅) crystallises in the C configuration. In compound 5, the VO moiety is disordered (83.3:16.7%) with respect to the plane spanned by the four equatorial ligand functions.     

Diffusion NMR studies on neutral and cationic square planar palladium(II) complexes

Diffusion NMR investigations were carried out in CD₂Cl₂ for a series of neutral (1-7) and cationic (8-10) square planar palladium complexes. Diffusion data were elaborated through a modified Stokes-Einstein equation that takes into account the size and shape of molecules. The hydrodynamic volume at infinite dilution of all complexes was found to be similar to the crystallographic volume and always much larger than the van der Waals volume. The self-aggregation tendency of [Pd(N,C⁻)(N,N)][PF₆] ionic complexes [(N,C⁻) = (C₆H₄-(Ph)C(O)-CN-Et); 8, (N,N) = 2,2′-bipirydine; 9, (N,N) = (2,6-(iPr)₂-C₆H₃)NC(Me)-C(Me)N(2,6-(iPr)₂-C₆H₃); 10, (N,N) = (2,6-(iPr)₂-C₆H₃)NC(R′)-C(R′)N(2,6-(iPr)₂-C₆H₃), R′₂ = naphthalene-1,8-diyl] was investigated by performing ¹H and ¹⁹F diffusion experiments as a function of the concentration. Clear evidence for the formation of ion triples containing two cationic units was obtained for 8, most likely due to the establishment of a weak Pd?O interaction. The tendency to form ion triples was much reduced in 9 and 10, having an increased steric hindrance in the apical positions. While 9 showed the usual tendency to afford a mixture of free ions and ion pairs, solvated ions were the predominant species in the case of 10 even at high concentration values (approaching 100 mM).     

An investigation of Cu(II) and Ni(II)-catalysed hydrolysis of (di)imines

The reactions of six diimine ligands with Cu(II) and Ni(II) halide salts have been investigated. The diimine ligands were Ph₂CN(CH₂)_nNCPh₂ (n = 2 (Bz₂en, 1a), 3 (Bz₂pn, 1b), 4 (Bz₂bn, 1c)), N,N′-bis-(2-tert-butylthio-1-ylmethylenebenzene)-2,2′diamino-biphenyl (2), N,N′-bis-(2-chloro-1-ylmethylenebenzene)-1,3-diaminobenzene (3) and N,N′-bis-(2-chloro-1-ylmethylenebenzene)-1,2-ethanediamine (4). Reactions of 1a-c, 2-4 with CuCl₂·2H₂O in dry ethanol at ambient temperature led to complete or partial hydrolysis of the diimine ligands to ultimately form copper diamine complexes. The non-hydrolyzed complexes of 1b and 1c, [Cu(L)Cl₂] (L = 1b, 1c), could be isolated when the reactions were carried out at low temperatures, and the half-hydrolyzed complex [Cu(Bzpn)Cl₂] could also be identified via X-ray crystallography. Similarly, reactions of 1a or 1b with NiCl₂·6H₂O or [NiBr₂(dme)] led to rapid hydrolysis of the imines and Ni complexes containing half-hydrolyzed 1a (Bzen; [trans-[Ni(Bzen)₂Br₂]) and 1b (Bzpn; [Ni(Bzpn)Br₂] could be isolated and identified via single crystal X-ray analysis. Kinetic studies were made of the hydrolyses of 1a, 1b in THF and 2 in acetone, in the presence of Cu(II), and of 1a in acetonitrile, in the presence of Ni(II). Activation parameters were determined for the latter reaction and for the copper-catalyzed hydrolysis of 2; the relatively large negative activation entropies clearly indicate rate-determining steps of an associative nature.     

Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Synthesis and structures of copper and gold complexes of the P,N ligands RNC(Bu)C(H)RPPh2 (R = SiMe3, H)

The reaction of the chelating P,N ligand RNC(Bu^t)CH(R)PPh₂ (R = SiMe₃) (1) with CuCl and CuCl₂ (probably by way of reduction to Cu(I) by the phosphine ligand) or Cu(NCCH₃)₄ClO₄ yielded the dimeric 1:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}Cl]₂ (2) or the monomeric 2:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}₂]ClO₄ (3), respectively. The presence of trace amounts of water during the reaction resulted in the successive cleavage of the two trimethylsilyl groups of the ligand and the formation of the monomeric chelate complexes [Cu{PPh₂CH(R)C(Bu^t)NH}₂]ClO₄ (4) and [Cu{PPh₂CH₂C(Bu^t)NH}₂]ClO₄ (5). Oxidation of 5 by atmospheric oxygen led to small quantities of the blue Cu(II) complex [Cu{(O)PPh₂CH₂C(Bu^t)NH}₂](ClO₄)₂ (6). The dimeric gold complexes [Au{PPh₂CH₂C(Bu^t)NH}]₂X₂ (X = BF₄, ClO₄) (7) were similarly obtained from the previously described Au{PPh₂CH(R)C(Bu^t)NR}Cl by replacing the covalently bound chlorine with the weakly coordinating anions in the presence of small quantities of water. The solution and solid state structures (except 5) of all complexes were determined by NMR spectroscopy and X-ray crystallography.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

Ketimine synthesis in the coordination sphere of thallium (I)

[AuTl(C₆F₅)₂(en)] (en = ethylenediamine) reacts with cyclic ketones as cyclopentanone (Cy⁵O), cyclohexanone (Cy⁶O) or cycloheptanone (Cy⁷O) in 1:1 or 1:2 molar ratio leading to products of stoichiometry [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NH₂}] (x = 5 1, 6 2 or 7 3), or [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NCy^x}] (x = 5 4, 6 5 or 7 6). Addition of ethylenediamine to the ketimine complexes in chloroform regenerates [AuTl(C₆F₅)₂(en)], the starting material, and the free ketimines, as their NMR and mass spectra evidenced. The ketimine complexes display luminescence in solid state at room temperature and at 77 K at higher wavelengths than the diamine starting product (505 nm). The excited states responsible for this behaviour are assigned to orbitals due to the gold-thallium interactions.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.     

Cu(II) and Ni(II) complexes based on monofunctional and dendrimeric pyrrole-imine ligands: Applications in catalytic liquid phase hydroxylation of phenol

New bis(pyrrolide-imine) copper(II) and Ni(II) complexes C1 and C2 [{ (C₃H₇)-NCH (C₄H₃N)}₂Cu], [{(C₃H₇)-NCH-(C₄H₃N)}₂Ni] as well as the bimetallic dendrimeric (pyrrolide-imine) copper(II) and nickel(II) complexes C3 and C4, [DAB-{(NCH-C₄H₃N)₄}Cu₂], [DAB-{(NCH-C₄H₃N)₄}Ni₂] (DAB = G1-polypropyleneimine dendrimer with a diaminobutane core) were prepared in good yields. The structure and composition of the complexes were confirmed by a combination of analytical techniques. These complexes were investigated as catalysts in the hydroxylation of phenol in aqueous media in the pH range of 2-6 for the mononuclear complexes, C1 and C2 while the bimetallic systems, C3 and C4 were studied over the pH range 2-8. H₂O₂ was used as the oxidant under an oxygen atmosphere. The copper systems generally showed higher activity as compared to their nickel analogues. Catechol was the predominant product followed by hydroquinone with small amounts of para-benzoquinone. The nickel complexes showed better selectivity for catechol. The pH of the reaction medium also plays a role in both activity and selectivity with pH 3 being optimal for activity and pH 6 for selectivity to catechol.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Benzylamidine complexes of platinum(II) derived by nucleophilic addition of primary and secondary amines. X-ray crystal structure of trans-[PtCl2{Z-N(H)C(NHMe)CH2Ph}2]

The reaction of cis- and trans-[PtCl₂(NCCH₂Ph)₂] with a 5-fold excess of MeNH₂ and Me₂NH in CH₂Cl₂ at −10 °C affords in high yield the bis-amidine derivatives cis- and trans-[PtCl₂{Z-N(H)C(NHMe)CH₂Ph}₂] (1a, 2a) and cis- and trans-[PtCl₂{E-N(H)C(NMe₂)CH₂Ph}₂] (3a, 4a), respectively. The complexes were characterized by means of elemental analysis, multinuclear NMR and FT-IR techniques. The X-ray diffraction analysis was carried out for trans-[PtCl₂{Z-N(H)C(NHMe)CH₂Ph}₂] (2a).Moreover, the in vitro cytotoxicity for the new derivatives was evaluated in a wide panel of human tumor cell lines.     

Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

Synthesis and characterization of CpMCl(PR3)(S or W-η-butadienesulfonyl) compounds of rhodium and iridium

A metathesis reaction of [Cp^∗MCl₂(PR₃)] [M = Rh, R = Ph (1), Me (3); M = Ir, R = Ph (2), Me (4)] takes place in the presence of potassium butadienesulfinate (SO₂CHCHCHCH₂)K (9) to afford the mononuclear compounds [Cp^∗M(Cl)(PR₃)(η¹-SO₂CHCHCHCH₂)] [M = Rh, R = Ph (11S), (11W); M = Rh, R = Me (13S), (13W)] and [M = Ir, R = Ph (12S); M = Ir, R = Me (14S), (14W)] under different reaction conditions. The addition of PR₃ (R = Ph, Me) to Cp^∗Ir(Cl)[(1,2,5-η)-SO₂CHCHCHCH₂] (7) affords the corresponding iridium isomers 12S, 12W and 14S, in a non-selective reaction, along with the corresponding dichloride compounds 2 or 4. The ¹H and ¹³C{¹H} NMR data are consistent with the butadienesulfonyl ligands coordinated exclusively through the sulfur atom, and they show the presence of two isomers, described as the S and W conformers, which can be isolated separately. There is clear evidence that these isomers correspond to the kinetic and thermodynamic derivatives, respectively.     

A closer look at the phosphorus-phosphorus double bond lengths in meta-terphenyl substituted diphosphenes

The single crystal X-ray structure of DmpPPDmp (1, Dmp = 2,6-Mes₂C₆H₃), which was previously reported to have a relatively short PP bond distance of 1.985(2) Å at room temperature, has been reexamined at variable temperatures. Crystallographic analyses of 1 at 100 K allow for resolution of disorder of the two phosphorus atoms (which is unresolvable from room temperature diffraction data), and for determination of a more conventional PP bond length of 2.029(1) Å. Single crystals of the closely related diphosphene DxpPPDxp (2, Dxp = 2,6-(2,6-Me₂C₆H₃)₂C₆H₃) show similar disorder in one of two crystallographically independent molecules in the unit cell. A value of 2.0276(4) Å is found for the non-disordered PP bonds at 100 K for 2. A new diphosphene Ar′PPAr′ (3, Ar′ = 2,6-Mes₂-4-OMe-C₆H₃) has been prepared and its structure has also been examined. The PP bond length for 3 was determined to be 2.0326(9) Å and relatively free of the effects of disorder.     

Synthesis and reactivity of five- and six-coordinate hydrido(vinyl) iridium(III) complexes

The reaction of the dihydrido iridium(III) precursor [IrH₂(Cl)(PiPr₃)₂] (5) with internal alkynes RCC(CO₂Me) (R = Me, CO₂Me) afforded the five-coordinate hydrido(vinyl) complexes [IrH(Cl){(E)-C(R)CH(CO₂Me)}(PiPr₃)₂] (6, 7), via insertion of the alkyne into one of the IrH bonds. Compounds 6 and 7 are also accessible by careful hydrogenation of the alkyne iridium(I) derivatives trans-[IrCl{RCC(CO₂Me)}(PiPr₃)₂] (9, 10), the latter being prepared from in situ generated trans-[IrCl(C₈H₁₄)(PiPr₃)₂] and RCC(CO₂Me). UV irradiation of 6 (R = CO₂Me) led to the formation of the isomer [IrH(Cl){κ²(C,O)-C(CO₂Me)CHC(OMe)O}(PiPr₃)₂] (3) having the vinyl ligand coordinated in a bidentate fashion. While 6 reacted with acetonitrile and CO to afford the six-coordinate iridium(III) compounds [IrH(Cl){(E)-C(CO₂Me)CH(CO₂Me)}(L′)(PiPr₃)₂] (11, 12), treatment of 6 with LiC₅H₅ gave the half-sandwich-type complex [(η⁵-C₅H₅)IrH{(E)-C(CO₂Me)CH(CO₂Me)}(PiPr₃)] (13) by, the loss of one PiPr₃. The reaction of 3 with CO under pressure resulted in the formation of [IrH(Cl){(Z)-C(CO₂Me)CH(CO₂Me)}(CO)(PiPr₃)₂] (14) in which, in contrast to the stereoisomer 12, the two CO₂Me substituents are trans disposed.