Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

Novel and efficient method for immobilization and stabilization of β-d-galactosidase by covalent attachment onto magnetic Fe3O4–chitosan nanoparticles

A novel and efficient immobilization of β-d-galactosidase from Aspergillus oryzae has been developed by using magnetic Fe₃O₄–chitosan (Fe₃O₄–CS) nanoparticles as support. The magnetic Fe₃O₄–CS nanoparticles were prepared by electrostatic adsorption of chitosan onto the surface of Fe₃O₄ nanoparticles made through co-precipitation of Fe²⁺ and Fe³⁺. The resultant material was characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. β-d-Galactosidase was covalently immobilized onto the nanocomposites using glutaraldehyde as activating agent. The immobilization process was optimized by examining immobilized time, cross-linking time, enzyme concentration, glutaraldehyde concentration, the initial pH values of glutaraldehyde and the enzyme solution. As a result, the immobilized enzyme presented a higher storage, pH and thermal stability than the soluble enzyme. Galactooligosaccharide was formed with lactose as substrate by using the immobilized enzyme as biocatalyst, and a maximum yield of 15.5% (w/v) was achieved when about 50% lactose was hydrolyzed. Hence, the magnetic Fe₃O₄–chitosan nanoparticles are proved to be an effective support for the immobilization of β-d-galactosidase.     

High activity and selectivity immobilized lipase on Fe3O4 nanoparticles for banana flavour synthesis

Lipase (E.C.3.1.1.3) from Thermomyces lanuginosus (TL) was directly bonded, through multiple physical interactions, on citric acid functionalized monodispersed Fe₃O₄ nanoparticles (NPs) in presence of a small amount of hydrophobic functionalities. A very promising scalable synthetic approach ensuring high control and reproducibility of the results, and an easy and green immobilization procedure was chosen for NPs synthesis and lipase anchoring. The size and structure of magnetic nanoparticles were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The samples at different degree of functionalization were analysed through thermogravimetric measurements. Lipase immobilization was further confirmed by enzymatic assay and Fourier transform infrared (FT-IR) spectra. Immobilized lipase showed a very high activity recovery up to 144% at pH = 7 and 323% at pH = 7.5 (activity of the immobilized enzyme compared to that of its free form). The enzyme, anchored to the Fe₃O₄ nanoparticles, to be easy recovered and reused, resulted more stable than the native counterpart and useful to produce banana flavour. The immobilized lipase results less sensitive to the temperature and pH, with the optimum temperature higher of 5 °C and optimum pH up shifted to 7.5 (free lipase optimum pH = 7.0). After 120 days, free and immobilized lipases retained 64% and 51% of their initial activity, respectively. Ester yield at 40 °C for immobilized lipase reached 88% and 100% selectivity.     

Degradation of Carbazole by Microbial Cells Immobilized in Magnetic Gellan Gum Gel Beads

Polycyclic aromatic heterocycles, such as carbazole, are environmental contaminants suspected of posing human health risks. In this study, we investigated the degradation of carbazole by immobilized Sphingomonas sp. strain XLDN2-5 cells. Four kinds of polymers were evaluated as immobilization supports for Sphingomonas sp. strain XLDN2-5. After comparison with agar, alginate, and κ-carrageenan, gellan gum was selected as the optimal immobilization support. Furthermore, Fe₃O₄ nanoparticles were prepared by a coprecipitation method, and the average particle size was about 20 nm with 49.65-electromagnetic-unit (emu) g⁻¹ saturation magnetization. When the mixture of gellan gel and the Fe₃O₄ nanoparticles served as an immobilization support, the magnetically immobilized cells were prepared by an ionotropic method. The biodegradation experiments were carried out by employing free cells, nonmagnetically immobilized cells, and magnetically immobilized cells in aqueous phase. The results showed that the magnetically immobilized cells presented higher carbazole biodegradation activity than nonmagnetically immobilized cells and free cells. The highest biodegradation activity was obtained when the concentration of Fe₃O₄ nanoparticles was 9 mg ml⁻¹ and the saturation magnetization of magnetically immobilized cells was 11.08 emu g⁻¹. Additionally, the recycling experiments demonstrated that the degradation activity of magnetically immobilized cells increased gradually during the eight recycles. These results support developing efficient biocatalysts using magnetically immobilized cells and provide a promising technique for improving biocatalysts used in the biodegradation of not only carbazole, but also other hazardous organic compounds.     

Immobilization of porcine pancreatic <Emphasis Type="Italic">α</Emphasis>-amylase on magnetic Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles: Applications to the hydrolysis of starch

Enzymes play a pivotal role in catalyzing diverse reactions. However, their instability upon repetitive/prolonged use, as well as their inhibition by high substrates and product concentration, remains an area of concern. In this study, porcine pancreatic α-amylase was immobilized on magnetic Fe₂O₃ nanoparticles (Fe₂O₃-NPs) in order to hydrolyze starch. The magnetic nanoparticle bound enzymes retained 94% of their initial enzyme activity. X-ray diffraction and atomic force microscopy analyses showed that the prepared matrix had advantageous microenvironment and a large surface area for binding significant amounts of protein. Functional groups present in enzyme and support were monitored by Fourier transform infrared spectroscopy. Immobilized enzyme exhibited lowered pH optimum (pH 6.0) to a greater degree than its soluble counterpart (pH 7.0). Optimum temperature for the immobilized enzyme shifted towards higher temperatures. The immobilized enzyme was significantly more resistant to inactivation caused by various metal ions and chemical denaturants. Immobilized α-amylase hydrolyzed 92% starch in a batch process, after 8 h at 40°C; while the free enzyme could hydrolyze only 73% starch under similar experimental conditions. A reusability experiment demonstrated that the immobilized enzyme retained 83% of its original activity even after its 8^th repeated use.     

Immobilization of yeast alcohol dehydrogenase on magnetic nanoparticles for improving its stability

Yeast alcohol dehydrogenase (YADH) was immobilized covalently on Fe₃O₄ magnetic nanoparticles (10.6 nm) via carbodiimide activation. The immobilization process did not affect the size and structure of magnetic nanoparticles. The YADH-immobilized magnetic nanoparticles were superparamagnetic with a saturation magnetization of 61 emu g^–1, only slightly lower than that of the naked ones (63 emu g^–1). Compared to the free enzyme, the immobilized YADH retained 62% activity and showed a 10-fold increased stability and a 2.7-fold increased activity at pH 5. For the reduction of 2-butanone by immobilized YADH, the activation energies within 25–45 °C, the maximum specific activity, and the Michaelis constants for NADH and 2-butanone were 27 J mol^–1, 0.23 mol min^–1 mg^–1, 0.62 mM, and 0.43 M, respectively. These results indicated a structural change of YADH with a decrease in affinity for NADH and 2-butanone after immobilization compared to the free enzyme.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Performance of Aspergillus niger B 03 β-xylosidase immobilized on polyamide membrane support

The dynamics of β-xylosidase biosynthesis from Aspergillus niger B 03 was investigated in laboratory bioreactor. Maximum xylosidase activity 5.5 U/ml was achieved after 80 h fermentation at medium pH 4.0. The isolated β-xylosidase was immobilized on polyamide membrane support and the basic characteristics of the immobilized enzyme were determined. Maximum immobilization and activity yield obtained was 30.0 and 6.8%, respectively. A shift in temperature optimum and pH optimum was observed for immobilized β-xylosidase compared to the free enzyme. Immobilized enzyme exhibited maximum activity at 45 °C and pH 4.5 while its free counterpart at 70 °C and pH 3.5, respectively. Thermal stability at 40 and 50 °C and storage stability of immobilized β-xylosidase were investigated at pH 5.0. Kinetic parameters K_m, V_max and K_i were determined for both enzyme forms. Free and immobilized β-xylosidase were tested for xylose production from birchwood xylan. The substrate was preliminarily depolymerized with xylanase to xylooligosaccharides and the amount of xylose obtained after their hydrolysis with free and immobilized β-xylosidase was determined by HPLC analysis. Continuous enzyme hydrolysis of birchwood xylan was performed with xylanase and free or immobilized β-xylosidase. The maximum extent of hydrolysis was 25 and 30% with free and immobilized enzyme, respectively. Immobilized preparation was also examined for reusability in 20 consecutive cycles at 40 °C.     

Immobilization of glucose oxidase and lactate dehydrogenase onto magnetic nanoparticles for bioprocess monitoring system

Glucose oxidase (GOD) and lactate dehydrogenase (LDH) were immobilized onto magnetic nanoparticles, viz. Fe₃O₄, via carbodiimide and glutaraldehyde. The immobilization efficiency was largely dependent upon the immobilization time and concentration of glutaraldehyde. The magnetic nanoparticles had a mean diameter of 9.3 nm and were superparamagnetic. The immobilization of GOD and LDH on the nanoparticles slightly decreased their saturation magnetization. However, the FT-IR spectra showed that GOD and LDH were immobilized onto the nanoparticles by different binding mechanisms, the reason for which was not well explained. The optimum pH values of the immobilized GOD and LDH were changed to 8 and 10, respectively. The free and immobilized enzyme kinetic parameters (K_m and V_max) were determined by Michaelis-Menten enzyme kinetics. The Km values for free and immobilized GOD were 0.168 and 0.324 mM, respectively, while those for free and immobilized LDH were 0.19 and 0.163 mM for NAD, and 2.976 and 4.785 mM for lactate, respectively. High operational stability was observed, with more than 80% of the initial enzyme activity being retained for the immobilized GOD up to 12 h and for the immobilized LDH up to 24 h. The immobilized GOD was applied to a sequential injection analysis system for the application of bioprocess monitoring.     

Biodesulfurization of Dibenzothiophene by Microbial Cells Coated with Magnetite Nanoparticles

Microbial cells of Pseudomonas delafieldii were coated with magnetic Fe₃O₄ nanoparticles and then immobilized by external application of a magnetic field. Magnetic Fe₃O₄ nanoparticles were synthesized by a coprecipitation method followed by modification with ammonium oleate. The surface-modified Fe₃O₄ nanoparticles were monodispersed in an aqueous solution and did not precipitate in over 18 months. Using transmission electron microscopy (TEM), the average size of the magnetic particles was found to be in the range from 10 to 15 nm. TEM cross section analysis of the cells showed further that the Fe₃O₄ nanoparticles were for the most part strongly absorbed by the surfaces of the cells and coated the cells. The coated cells had distinct superparamagnetic properties. The magnetization (δ_s) was 8.39 emu · g⁻¹. The coated cells not only had the same desulfurizing activity as free cells but could also be reused more than five times. Compared to cells immobilized on Celite, the cells coated with Fe₃O₄ nanoparticles had greater desulfurizing activity and operational stability.     

Conjugation of α-chymotrypsin on a polymeric hydrophilic nanolayer covering magnetic nanoparticles

Magnetic nanoparticles, covered by a polymeric hydrophilic nanolayer containing reactive amino groups, were obtained via Hoffman degradation of the polyacrylamide-coated Fe₃O₄ nanoparticles synthesized by photochemical in situ polymerization, and then conjugated the model enzyme––α-chymotrypsin (CT) by use of EDC· HCl and NHS at room temperatures. The mechanism of photochemical in situ polymerization was briefly proposed in this paper. Superparamagnetic properties were retained for Fe₃O₄ after enzyme immobilization while slightly reducing the value of saturation magnetization. Crystalline structure of Fe₃O₄ after CT immobilization was consistent with that of the freshly prepared Fe₃O₄ by X-ray diffraction (XRD) analysis. The binding capacity was 69 and 61 mg enzyme/g nanogel determined by thermogravimetric (TG) analysis and by standard BCA protein assay, respectively. Specific activity of the immobilized CT was 0.93 U/(mg min), only 59.3% as that of free CT. Thermal stability of CT was improved after being bound to the amine-functionalized magnetic nanogel.     

Efficient phenol degradation by laccase immobilized on functional magnetic nanoparticles in fixed bed reactor under high‐gradient magnetic field

Enzymatic degradation of emerging contaminants has gained great interest for the past few years. However, free enzyme often incurs high costs in practice. The immobilized laccase on the polyethylenimine (PEI)‐functionalized magnetic nanoparticles (Fe₃O₄–NH₂–PEI–laccase) was fabricated to efficiently degrade phenolic compounds continuously in a newly fixed bed reactor under a high‐gradient magnetic field. The degradation rate of continuous treatment in the bed after 18 h was 2.38 times as high as that of batch treatment after six successive operations with the same treatment duration. Under the optimal conditions of volume fraction of nickel wires mesh, flow rate of phenol solution, phenol concentration, and Fe₃O₄–NH₂–PEI–laccase amount, the degradation rate of phenol kept over 70.30% in 48 h continuous treatment. The fixed bed reactor filled with Fe₃O₄–NH₂–PEI–laccase provided a promising avenue for the continuous biodegradation of phenolic compounds for industrial wastewater in practice.     

Catalytic properties of the immobilized Talaromyces thermophilus β-xylosidase and its use for xylose and xylooligosaccharides production

The present study explores the efficiency of Talaromyces thermophilus β-xylosidase, in the production of xylose and xylooligosaccharides. The β-xylosidase was immobilized by different methods namely ionic binding, entrapment and covalent coupling and using various carriers. Chitosan, pre-treated with glutaraldehyde, was selected as the best support material for β-xylosidase immobilization; it gave the highest immobilization and activity yields (94%, 87%, respectively) of initial activity, and also provided the highest stability, retaining 94% of its initial activity even after being recycled 25 times. Shifts in the optimal temperature and pH were observed for the immobilized β-xylosidase when compared to the free enzyme. The maximal activity obtained for the immobilized enzyme was achieved at pH 8.0 and 53 °C, whereas that for the free enzyme was obtained at pH 7.0 and 50 °C. The immobilized enzyme was more thermostable than the free β-xylosidase. We observed an increase of the K_m values of the free enzyme from 2.37 to 3.42 mM at the immobilized state. Native and immobilized β-xylosidase were found to be stimulated by Ca²⁺, Mn²⁺ and Co²⁺ and to be inhibited by Zn²⁺, Cu²⁺, Hg²⁺, Fe²⁺, EDTA and SDS. Immobilized enzyme was found to catalyze the reverse hydrolysis reaction, forming xylooligosaccharides in the presence of a high concentration of xylose. In order to examine the synergistic action of xylanase and β-xylosidase of T. thermophilus, these two enzymes were co-immobilized on chitosan. A continuous hydrolysis of 3% Oat spelt xylan at 50 °C was performed and better hydrolysis yields and higher amount of xylose was obtained.     

Immobilization of Kluyveromyces lactis β galactosidase on concanavalin A layered aluminium oxide nanoparticles—Its future aspects in biosensor applications

Several new types of carrier and technology have been implemented in the recent past to improve traditional enzyme immobilization which aims to enhance enzyme loading, activity and stability in order to decrease the cost of enzyme in industrial processes. Thus, the present study aimed to work out a simple and high yield procedure for the immobilization of Kluyveromyces lactis β galactosidase on a bioaffinity support, concanavalin A layered Al₂O₃ nanoparticles (Con A layered Al₂O₃-NPs). Thermogravimetric analysis of bioaffinity support revealed 6% loss in weight at 600 °C whereas its thermal decomposition was observed at 350 °C by differential thermal analysis. No significant change was noticed in the band intensity of pUC19 plasmid upon its treatment with Con A layered Al₂O₃-NPs. Comet assay further exhibited negligible change in tail length of comet after treating the lymphocytes by bioaffinity matrix. Atomic force microscopy revealed large surface area of Con A layered Al₂O₃-NPs for binding higher amounts of enzyme. Moreover, Fourier transform-infrared spectroscopy confirmed binding of β galactosidase on bioaffinity support by exhibiting broadening in peaks at 3220.61 cm⁻¹ and 3447.27 cm⁻¹. Soluble and immobilized β galactosidase showed same pH-optima at pH 7.0. However, immobilized enzyme exhibited enhanced pH stability and broad spectrum temperature optimum than soluble β galactosidase. Immobilized β galactosidase was found to be highly stable against product inhibition by galactose and retained 85% activity after its sixth repeated use.     

IMMOBILIZATION OF BOVINE CATALASE ONTO MAGNETIC NANOPARTICLES

The scope of this study is to achieve carrier-bound immobilization of catalase onto magnetic particles (Fe₃O₄ and Fe₂O₃NiO₂ · H₂O) to specify the optimum conditions of immobilization. Removal of H₂O₂ and the properties of immobilized sets were also investigated. To that end, adsorption and then cross-linking methods onto magnetic particles were performed. The optimum immobilization conditions were found for catalase: immobilization time (15 min for Fe₃O₄; 10 min for Fe₂O₃NiO₂ · H₂O), the initial enzyme concentration (1 mg/mL), amount of magnetic particles (25 mg), and glutaraldehyde concentration (3%). The activity reaction conditions (optimum temperature, optimum pH, pH stability, thermal stability, operational stability, and reusability) were characterized. Also kinetic parameters were calculated by Lineweaver–Burk plots. The optimum pH values were found to be 7.0, 7.0, and 8.0 for free enzyme, Fe₃O₄-immobilized catalases, and Fe₂O₃NiO₂ · H₂O-immobilized catalases, respectively. All immobilized catalase systems displayed the optimum temperature between 25 and 35°C. Reusability studies showed that Fe₃O₄-immobilized catalase can be used 11 times with 50% loss in original activity, while Fe₂O₃NiO₂ · H₂O-immobilized catalase lost 67% of activity after the same number of uses. Furthermore, immobilized catalase systems exhibited improved thermal and pH stability. The results transparently indicate that it is possible to have binding between enzyme and magnetic nanoparticles.     

Characterization of <Emphasis Type="Italic">Mucor miehei</Emphasis> lipase immobilized on polysiloxane-polyvinyl alcohol magnetic particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding. The resulting immobilized biocatalyst was recycled by seven assays, with a retained activity around 10% of its initial activity. K_m and V_max were respectively 228.3 M and 36.1 U mg of protein^–1 for immobilized enzyme. Whereas the optimum temperature remained the same for both soluble and immobilized lipase (45 °C), there was a shift in pH profiles after immobilization. Optimum pH for the immobilized lipase was 8.0. Immobilized enzyme showed to be more resistant than soluble lipase when assays were performed out of the optimum temperature or pH.     

Desulfurization with <Emphasis Type="Italic">Thialkalivibrio versutus</Emphasis> immobilized on magnetic nanoparticles modified with 3-aminopropyltriethoxysilane

Objective

Thialkalivibrio versutus D301 cells were immobilized on Fe₃O₄ nanoparticles (NPs) synthesized by an improved chemical coprecipitation method and modified with 3-aminopropyltriethoxysilane (APTES), then the immobilized cells were used in sulfur oxidation.

Results

The prepared Fe₃O₄–APTES NPs had a narrow size distribution (10 ± 2 nm) and were superparamagnetic, with a saturation magnetization of 60.69 emu/g. Immobilized cells had a saturation magnetization of 34.95 emu/g and retained superparamagnetism. The optimum conditions for cell immobilization were obtained at pH 9.5 and 1 M Na⁺. The immobilization capacity of Fe₃O₄–APTES NPs was 7.15 g DCW/g-NPs that was 2.3-fold higher than that of Fe₃O₄ NPs. The desulfurization efficiency of the immobilized cells was close to 100%, having the same sulfur oxidation capacity as free cells. Further, the immobilized cells could be reused at least eight times, retaining more than 85% of their desulfurization efficiency.

Conclusion

Immobilization of cells with the modified magnetic NPs efficiently increased cell controllability, have no effect on their desulfurization activity and could be effectively used in large-scale industrial applications.

     

Immobilization of glucose oxidase on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> magnetic nanoparticles

Glucose oxidase (GOD) was covalently immobilized onto Fe₃O₄/SiO₂ magnetic nanoparticles (FSMNs) using glutaraldehyde (GA). Optimal immobilization was at pH 6 with 3-aminopropyltriethoxysilane at 2% (v/v), GA at 3% (v/v) and 0.143 g GOD per g carrier. The activity of immobilized GOD was 4,570 U/g at pH 7 and 50°C. The immobilized GOD retained 80% of its initial activity after 6 h at 45°C while free enzyme retained only 20% activity. The immobilized GOD maintained 60% of its initial activity after 6 cycles of repeated use and retained 75% of its initial activity after 1 month at 4°C whereas free enzymes retained 62% of its activity.     

In situ magnetic separation and immobilization of dibenzothiophene-desulfurizing bacteria

In situ cell separation and immobilization of bacterial cells for biodesulfurization were developed by using superparamagnetic Fe₃O₄ nanoparticles (NPs). The Fe₃O₄ NPs were synthesized by coprecipitation followed by modification with ammonium oleate. The surface-modified NPs were monodispersed and the particle size was about 13 nm with 50.8 emu/g saturation magnetization. After adding the magnetic fluids to the culture broth, Rhodococcus erythropolis LSSE8-1 cells were immobilized by adsorption and then separated with an externally magnetic field. The maximum amount of cell mass adsorbed was about 530 g dry cell weight/g particles to LSSE8-1 cells. Analysis showed that the nanoparticles were strongly absorbed to the surface and coated the cells. Compared to free cells, the coated cells not only had the same desulfurizing activity but could also be easily separated from fermentation broth by magnetic force. Based on the adsorption isotherms and Zeta potential analysis, it was believed that oleate-modified Fe₃O₄ NPs adsorbed bacterial cells mainly because of the nano-size effect and hydrophobic interaction.     

Purification and characterization of membrane-bound peroxidase from date palm leaves (Phoenix dactylifera L.)

Peroxidase from date palm (Phoenix dactylifera L.) leaves was purified to homogeneity and characterized biochemically. The enzyme purification included homogenization, extraction of pigments followed by consecutive chromatographies on DEAE-Sepharose and Superdex 200. The purification factor for purified date palm peroxidase was 17 with 5.8% yield. The purity was checked by SDS and native PAGE, which showed a single prominent band. The molecular weight of the enzyme was approximately 55 kDa as estimated by SDS–PAGE. The enzyme was characterized for thermal and pH stability, and kinetic parameters were determined using guaiacol as substrate. The optimum activity was between pH 5–6. The enzyme showed maximum activity at 55 °C and was fairly stable up to 75 °C, with 42% loss of activity. Date palm leaves peroxidase showed K_m values of 0.77 and 0.045 mM for guaiacol and H₂O₂, respectively. These properties suggest that this enzyme could be a promising tool for applications in different analytical determinations as well as for treatment of industrial effluents at low cost.