Artificial site-specific DNA-nicking system based on common restriction enzyme assisted by PNA openers

We report on the peptide nucleic acid (PNA)-directed design of a DNA-nicking system that enables selective and quantitative cleavage of one strand of duplex DNA at a designated site, thus mimicking natural nickases and significantly extending their potential. This system exploits the ability of pyrimidine PNAs to serve as openers for specific DNA sites by invading the DNA duplex and exposing one DNA strand for oligonucleotide hybridization. The resultant secondary duplex can act as a substrate for a restriction enzyme, which ultimately creates a nick in the parent DNA. We demonstrate that several restriction enzymes of different types could be successfully used in the PNA-assisted system we developed. Importantly, the enzyme cleavage efficiency is basically not impaired on such artificially generated substrates, compared with the efficiency on regular DNA duplexes. Our design originates a vast class of semisynthetic rare-cleaving DNA nickases, which are essentially absent at present. In addition, we show that the site-specific PNA-assisted nicking of duplex DNA can be engaged in a rolling-circle DNA amplification (RCA) reaction. This new RCA format demonstrates the practical potential of the novel biomolecular tool we propose for DNA technology and DNA diagnostics.     

DNA hybridization on microparticles: determining capture-probe density and equilibrium dissociation constants

Many DNA-probe assays utilize oligonucleotide-coated microparticles for capture of complementary nucleic acids from solution. During development of these assays, as well as in other particle-based nucleic acid applications, it is useful to know both the amount of duplex formation expected under various experimental conditions and the coating density of the capture oligonucleotide on the particle surface. We examined the simplest form of a DNA-probe microparticle assay: hybridization of a particle-bound capture oligonucleotide to its solution-phase complement. Fluorescein-labeled solution-phase oligonucleotide was hybridized to varying amounts of particles, and the amount of labeled oligonucleotide remaining in solution at equilibrium was measured. We present a simple two-state, all-or-none model for bimolecular hybridization of non-self-complementary sequences that can be used to calculate the equilibrium dissociation constant ( Kd ) from hybridization data. With experimental conditions where both the Kd value and the concentration of capture probe in the reaction are small relative to the concentration of labeled complementary oligonucleotide in the reaction, density of the capture probe on the particle's surface can also be determined. Kd values for particle-based hybridization were different from those obtained from solution-phase thermodynamic parameters. At higher temperatures, hybridization on particles was more efficient than hybridization in solution.     

PNA beacons for duplex DNA

We report here on the hybridization of peptide nucleic acid (PNA)-based molecular beacons (MB) directly to duplex DNA sites locally exposed by PNA openers. Two stemless PNA beacons were tested, both featuring the same recognition sequence and fluorophore-quencher pair (Fluorescein and DABCYL, respectively) but differing in arrangement of these groups and net electrostatic charge. It was found that one PNA beacon rapidly hybridized, with the aid of openers, to its complementary target within duplex DNA at ambient conditions via formation of a PD-like loop. In contrast, the other PNA beacon bound more slowly to preopened duplex DNA target and only at elevated temperatures, although it readily hybridized to single-stranded (ss) DNA target. Besides a higher selectivity of hybridization provided by site-specific PNA openers, we expect this approach to be very useful in those MB applications when denaturation of the duplex DNA analytes is unfavorable or undesirable. Furthermore, we show that PNA beacons are advantageous over DNA beacons for analyzing unpurified/nondeproteinized DNA samples. This feature of PNA beacons and our innovative hybridization strategy may find applications in emerging fluorescent DNA diagnostics.     

Fluorescence-based detection of short DNA sequences under non-denaturing conditions

The ability of peptide nucleic acid (PNA) to open up duplex DNA in a highly sequence-specific manner makes it possible to detect short DNA sequences on the background of or within genomic DNA under non-denaturing conditions. To do so, chosen marker sites in double-stranded DNA are locally opened by a pair of PNA openers, thus transforming one strand within the target region (20-30 bp) into the single-stranded form. Onto this accessible DNA sequence a circular oligonucleotide probe is assembled, which serves as a template for rolling circle amplification (RCA). Both homogeneous and heterogeneous assay formats are investigated, as are different formats for fluorescence-based amplicon detection. Our recent data with immobilized analytes suggest that marker sequences in plasmid and bacterial chromosomal DNA can be successfully detected.     

Oligonucleotides form a duplex with non-helical properties on a positively charged surface

The double helix is known to form as a result of hybridization of complementary nucleic acid strands in aqueous solution. In the helix the negatively charged phosphate groups of each nucleic acid strand are distributed helically on the outside of the duplex and are available for interaction with cationic groups. Cation-coated glass surfaces are now widely used in biotechnology, especially for covalent attachment of cDNAs and oligonucleotides as surface-bound probes on microarrays. These cationic surfaces can bind the nucleic acid backbone electrostatically through the phosphate moiety. Here we describe a simple method to fabricate DNA microarrays based upon adsorptive rather than covalent attachment of oligonucleotides to a positively charged surface. We show that such adsorbed oligonucleotide probes form a densely packed monolayer, which retains capacity for base pair-specific hybridization with a solution state DNA target strand to form the duplex. However, both strand dissociation kinetics and the rate of DNase digestion suggest, on symmetry grounds, that the target DNA binds to such adsorbed oligonucleotides to form a highly asymmetrical and unwound duplex. Thus, it is suggested that, at least on a charged surface, a non-helical DNA duplex can be the preferred structural isomer under standard biochemical conditions.     

Thermodynamics of DNA-RNA heteroduplex formation: effects of locked nucleic acid nucleotides incorporated into the DNA strand

A locked nucleic acid (LNA) monomer is a conformationally restricted nucleotide analogue exhibiting enhanced hybridization efficiency toward complementary strand. The potential of LNA-based oligonucleotides has been sought to improve the selectivity and specificity of probe sets employed in detection and specific targeting of nucleic acids. We have evaluated the influence of "locked nucleic acid" residues on hybridization thermodynamics, counterions and hydration of DNA.RNA heteroduplex using spectroscopic and calorimetric techniques. One to three LNA substitutions have been introduced either at the adenine (5'-AGCACCAG) or thymine (5'-TGCTCCTG) residues of the DNA strand. A complete thermodynamic profile for heteroduplex formation suggested that LNA-induced stabilization results from a favorable increase in the enthalpy of hybridization that compensates for the unfavorable entropy change. Analysis of differential scanning calorimetry data indicated a nonzero heat capacity change, DeltaCp, accompanying the heteroduplex formation. Isothermal titration calorimetry measurements indicated an increase in binding affinity of the two strands as the LNA content of the heteroduplex is increased. Overall our result demonstrated that the effect of LNA-substitution at the thymine residue is more pronounced compared to the adenine residue. Furthermore, optical melting studies showed that, compared to an unmodified duplex, the formation of LNA-modified duplex is accompanied by a higher uptake of counterions and a lower uptake of water molecules. Our result, thus, presents a preliminary attempt toward the characterization of hybridization thermodynamics of the LNA-based probe-target sets, which will in turn aid in the selection of optimal conditions for hybridization experiments, and evaluation of the minimum probe-length required for hybridization and cloning experiments.     

Membrane-based hybridization capture of intracellular peptide nucleic acid

Peptide nucleic acid (PNA) is a chimeric oligonucleotide with nucleotide-derived bases and a peptide backbone. Compared with natural nucleotides, PNA has several advantages, including improved stability and high sequence discrimination during duplex formation. Despite its potential for therapeutic application, analysis technologies have not been generalized, mainly due to ambiguous physiochemical properties resembling those of nucleic acids as well as protein. Here we present a PNA detection method: sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) followed by electrotransfer to a Western blotting membrane and then hybridization with a radiolabeled oligonucleotide probe. This method is useful for evaluating the quality of synthetic PNA and determining its intracellular localization.     

Application of synthetic oligonucleotides to the diagnosis of human genetic diseases

Under appropriate conditions synthetic oligonucleotide hybridization probes display essentially absolute hybridization specificity. That is, every nucleotide must form a Watson-Crick base pair in order that the probe forms a stable duplex. All of the non-Watson-Crick base pairs, including G-T, have a destabilizing effect. Thus, it is possible to choose stringent conditions of hybridization such that, while a perfectly matched duplex between an oligonucleotide and complementary DNA will form, duplexes mismatched at one or more position will not. Mutations in a single base in the DNA sequence of a gene can and do result in genetic diseases. The hybridization of oligonucleotides to the region of DNA containing these base changes would be affected by the mutations and thus, oligonucleotide hybridization provides a means of detecting single base changes. In an attempt to develop a non-radioactive method for the detection of human genetic diseases, we have prepared biotinylated-oligonucleotides by an enzymatic method. An oligonucleotide probe (23-mer) containing a single biotinylated deoxyuridine residue at the 3'-terminus was prepared by a primer extention reaction using E. coli DNA polymerase I (Klenow fragment). The probe could be specifically and tightly bound with Avidin D in 1 M NaCl. It could be hybridized to a plasmid DNA containing a perfectly matched complementary sequence, but not to a DNA containing 5 non-consecutive non-complementary bases. The hybridized biotinylated probe could be visualized by Avidin D and biotinylated alkaline phosphatase, even when 1.8 ng of the plasmid DNA (0.5 fmol) was used. A general approach to the enzymatic synthesis of oligonucleotides containing a single biotinylated deoxyuridine at the 3' end is described.     

Strategies for optimizing DNA hybridization on surfaces

Specific and predictable hybridization of the polynucleotide sequences to their complementary counterparts plays a fundamental role in the rational design of new nucleic acid nanodevices. Generally, nucleic acid hybridization can be performed using two major strategies, namely hybridization of DNA or RNA targets to surface-tethered oligonucleotide probes (solid-phase hybridization) and hybridization of the target nucleic acids to randomly distributed probes in solution (solution-phase hybridization). Investigations into thermodynamic and kinetic parameters of these two strategies showed that hybridization on surfaces is less favorable than that of the same sequence in solution. Indeed, the efficiency of DNA hybridization on surfaces suffers from three constraints: (1) electrostatic repulsion between DNA strands on the surface, (2) steric hindrance between tethered DNA probes, and (3) nonspecific adsorption of the attached oligonucleotides to the solid surface. During recent years, several strategies have been developed to overcome the problems associated with DNA hybridization on surfaces. Optimizing the probe surface density, application of a linker between the solid surface and the DNA-recognizing sequence, optimizing the pH of DNA hybridization solutions, application of thiol reagents, and incorporation of a polyadenine block into the terminal end of the recognizing sequence are among the most important strategies for enhancing DNA hybridization on surfaces.     

Enzymatic labeling of nucleic acids

Enzymatic labeling of nucleic acids is a fundamental tool in molecular biology with virtually every aspect of nucleic acid hybridization technique involving the use of labeled probes. Different methods for enzymatic labeling of DNA, RNA and oligonucleotide probes are available today. In this review, we will describe both radioactive and nonradioactive labeling methods, yet the choice of system for labeling the probe depends on the application under study.     

Position of the fluorescent label is a crucial factor determining signal intensity in microarray hybridizations

A key issue in applications of short oligonucleotide-based microarrays is how to design specific probes with high sensitivity. Some details of the factors affecting microarray hybridization remain unclear, hampering a reliable quantification of target nucleic acids. We have evaluated the effect of the position of the fluorescent label [position of label (POL)] relative to the probe-target duplex on the signal output of oligonucleotide microarrays. End-labelled single-stranded DNA targets of different lengths were used for hybridization with perfect-match oligonucleotide probe sets targeting different positions of the same molecule. Hybridization results illustrated that probes targeting the labelled terminus of the target showed significantly higher signals than probes targeting other regions. This effect was independent of the target gene, the fluorophore and the slide surface chemistry. Comparison of microarray signal patterns of fluorescently end-labelled, fluorescently internally random-labelled and radioactively end-labelled target-DNAs with the same set of oligonucleotide probes identified POL as a critical factor affecting signal intensity rather than binding efficiency. Our observations define a novel determinant for large differences of signal intensities. Application of the POL effect may contribute to better probe design and data interpretation in microarray applications.     

Recognition of duplex DNA by RNA polynucleotides.

We are interested in creating artificial gene repressors based on duplex DNA recognition by nucleic acids. Homopyrimidine RNA oligonucleotides bind to duplex DNA at homopurine/homopyrimidine sequences under slightly acidic conditions. Recognition is sequence-specific, involving rU.dA.dT and rC+.dG.dC base triplets. Affinities were determined for folded polymeric RNAs (ca. 100-200 nt) containing 0, 1 or 3 copies of a 21 nt RNA sequence that binds duplex DNA by triple helix formation. When this recognition sequence was inserted into the larger folded RNAs, micromolar concentrations of the resulting RNA ligands bound a duplex DNA target at pH 5. However, these binding affinities were at least 20-fold lower than the affinity of an RNA oligonucleotide containing only the recognition sequence. Enzymatic probing of folded RNAs suggests that reduced affinity arises from unfavorable electrostatic, structural and topological considerations. The affinity of a polymeric RNA with three copies of the recognition sequence was greater than that of a polymeric RNA with a single copy of the sequence. This affinity difference ranged from 2.6- to 13-fold, depending on pH. Binding of duplex DNA by polymeric RNA might be improved by optimizing the RNA structure to efficiently present the recognition sequence.     

Duplex DNA capture

This article describes the sequence-specific isolation and purification of intact double-stranded DNA (dsDNA) by oligonucleotide/PNA-assisted affinity capture (OPAC). The OPAC assay is based on selective tagging of a DNA duplex by biotinylated oligodeoxyribonucleotide (ODN) through formation of a so-called PD-loop. The PD-loop is assembled with the aid of a pair of PNA "openers", which allow sequence-specific targeting with a Watson-Crick complementary ODN probe in the exposed region of the dsDNA. The protocol involves three steps. First, two cationic bis-PNAs locally pry the DNA duplex apart at a predetermined site. Then, the exposed DNA single strand is targeted by a complementary biotinylated ODN to selectively form a stable PD-loop complex. Finally, the capture of dsDNA is performed using streptavidin covered magnetic beads. The OPAC procedure has many advantages in the isolation of highly purified native DNA over other affinity capture and amplification techniques.     

A streptavidin paramagnetic-particle based competition assay for the evaluation of the optical selectivity of quadruplex nucleic acid fluorescent probes

Although quadruplex nucleic acids are thought to be involved in many biological processes, they are massively overwhelmed by duplex DNA in the cell. Small molecules, able to probe quadruplex nucleic acids with high optical selectivity, could possibly achieve the visualization of these processes. The aim of the method described herein is to evaluate quickly the optical selectivity of quadruplex nucleic acid probes, in isothermal conditions, using widely available materials, small quantities of oligonucleotides and virtually any kind and quantity of biological competitor. The assay relies on the use of streptavidin-coated paramagnetic particles and biotinylated quadruplex forming oligonucleotides, allowing a quick and easy separation of the quadruplex target from the competitor. In the present study, two quadruplex nucleic acids (the DNA and RNA human telomeric repeats) have been used as targets while a duplex DNA oligonucleotide, total DNA, total RNA, another quadruplex nucleic acid and a protein have been used as competitors. The optical selectivity of various probes, displaying different photophysical properties and binding selectivities, has been successfully examined, allowing the identification of a best candidate for further cell microscopy experiments. This assay allows a quick and reliable assessment of the labeling properties of a quadruplex binder in cellular environment conditions. It is an interesting alternative to gel electrophoresis experiments since it is performed in solution, has a well-resolved separation system and allows easy quantifications.     

In situ localization of small RNAs in plants by using LNA probes

Small RNAs have crucial roles in numerous aspects of plant biology. Despite our current understanding of their biogenesis and mechanisms of action, the biological function of small RNAs, particularly miRNAs, remains largely unknown. To decipher small RNA function, knowledge about their spatiotemporal patterns of expression is essential. Here we report an in situ hybridization method for the precise localization of small RNAs in plants by using locked nucleic acid (LNA) oligonucleotide probes. This method has been adapted from protocols used to detect messenger RNAs in formaldehyde-fixed and paraffin-embedded tissue sections, but it includes essential optimizations in key prehybridization, hybridization and posthybridization steps. Most importantly, optimization of probe concentration and hybridization temperature is required for each unique LNA probe. We present the detailed protocol starting from sectioned tissues, and we include troubleshooting tips and recommended controls. This method has been used successfully in several plant species and can be completed within 2-6 d.     

Hybridization of DNA targets to glass-tethered oligonucleotide probes

Hybridization of nucleic acids to surface-tethered oligonucleotide probes has numerous potential applications in genome mapping and DNA sequence analysis. In this article, we describe a simple standard protocol for routine preparation of terminal amine-derivatized 9-mer oligonucleotide arrays on ordinary microscope slides and hybridization conditions with DNA target strands of up to several hundred bases in length with good discrimination against mismatches. Additional linker arms separating the glass surface from the probe sequence are not necessary. The technique described here offers a powerful tool for the detection of specific genetic mutations.     

Liquid-based hybridization assay with real-time detection in miniaturized array platforms

An assay for the fluorescent detection of short oligonucleotide probe hybridization in miniaturized high-density array platforms is presented. It combines hybridization in solution with real-time fluorescent detection, which involves measurement of fluorescence increase by means of an induced fluorescence resonance energy transfer. The feasibility of this approach using DNA or RNA as a target, and short DNA- as well as LNA (locked nucleic acid)-modified oligonucleotides as probes is shown. The presented approach could potentially contribute to a significant increase in the throughput of large-scale genomic applications, such as oligofingerprinting and genotyping, and also reduce material consumption.     

Increased stability and specificity through combined hybridization of peptide nucleic acid (PNA) and locked nucleic acid (LNA) to supercoiled plasmids for PNA-anchored "Bioplex" formation

Low cellular uptake and poor nuclear transfer hamper the use of non-viral vectors in gene therapy. Addition of functional entities to plasmids using the Bioplex technology has the potential to improve the efficiency of transfer considerably. We have investigated the possibility of stabilizing sequence-specific binding of peptide nucleic acid (PNA) anchored functional peptides to plasmid DNA by hybridizing PNA and locked nucleic acid (LNA) oligomers as "openers" to partially overlapping sites on the opposite DNA strand. The PNA "opener" stabilized the binding of "linear" PNA anchors to mixed-base supercoiled DNA in saline. For higher stability under physiological conditions, bisPNA anchors were used. To reduce nonspecific interactions when hybridizing highly cationic constructs and to accommodate the need for increased amounts of bisPNA when the molecules are uncharged, or negatively charged, we used both PNA and LNA oligomers as "openers" to increase binding kinetics. To our knowledge, this is the first time that LNA has been used together with PNA to facilitate strand invasion. This procedure allows hybridization at reduced PNA-to-plasmid ratios, allowing greater than 80% hybridization even at ratios as low as 2:1. Using significantly lower amounts of PNA-peptides combined with shorter incubation times reduces unspecific binding and facilitates purification.