Decolorization of textile reactive dyes by the crude laccase produced from solid-state fermentation of agro-byproducts

Reactive dyes are one of the major sources of waste-water pollution. Efficient degradation of these dyes with enzymes produced from agricultural waste has attracted tremendous recent interests in both the scientific community and the general public. In this study, we took advantage of solid-state fermentation of four agro-byproducts (rape stem, wheat bran, peanut shell and rice hull) for producing laccase from the fungus Trametes sp. AH28-2. Higher laccase activities were obtained in multiple-substrates media than in single substrate media. The maximum yield of laccase (2.10 × 10⁶ U/kg) was obtained in the medium containing 60% rape stem, 20% peanut shell and 20% wheat bran, without the supplement of any toxic inducers. Our results further demonstrated that the textile reactive dyes Levafix Blue CA and Cibacron Blue FN-R (1.0 g/l) were completely decolorized by the crude laccase (5.0 U/l) obtained within 15 h in the absence of any mediator. Therefore, the agro-byproducts could be re-utilized to produce laccase for the decolorization of textile reactive dyes. Q.Y. Sun and Y.Z. Hong contributed equally to the study.     

Amine functional monodisperse microbeads via precipitation polymerization of N-vinyl formamide: immobilized laccase for benzidine based dyes degradation

Densely cross-linked poly(vinylamine) microbeads (∼2 μm) were prepared by precipitation copolymerization of N-vinyl formamide and ethylene glycoldimethacrylate in acetonitrile. The formamido groups of the microbeads were hydrolyzed into amino groups. Then, amino-functionalized microbeads were used for covalent immobilization of laccase via glutaraldehyde coupling. The average amount of immobilized enzyme was 18.7 mg/g microbeads. Kinetic parameters, V_max and K_m values were determined as 20.7 U/mg protein and 2.76 × 10⁻² mmol/L for free enzyme and 15.8 U/mg protein and 4.65 mmol/L for the immobilized laccase, respectively. The immobilized laccase was operated in a batch reactor for the degradation of two different benzidine based dyes (i.e., Direct Blue 1 and Direct Red 128). The laccase immobilized on the microbeads was very effective for removal of these dyes which interfere with the hormonal system.     

Bio-remediation of colored industrial wastewaters by the white-rot fungi Phanerochaete chrysosporium and Pleurotus ostreatus and their enzymes

The effect of Phanerochaete chrysosporium and Pleurotus ostreatus whole cells and their ligninolytic enzymes on models of colored industrial wastewaters was evaluated. Models of acid, direct and reactive dye wastewaters from textile industry have been defined on the basis of discharged amounts, economic relevance and representativeness of chemical structures of the contained dyes. Phanerochaete chrysosporium provided an effective decolourization of direct dye wastewater model, reaching about 45% decolourization in only 1 day of treatment, and about 90% decolourization within 7 days, whilst P. ostreatus was able to decolorize and detoxify acid dye wastewater model providing 40% decolourization in only 1 day, and 60% in 7 days. P. ostreatus growth conditions that induce laccase production (up to 130,000 U/l) were identified, and extra-cellular enzyme mixtures, with known laccase isoenzyme composition, were produced and used in wastewater models decolourization. The mixtures decolorized and detoxified the acid dye wastewater model, suggesting laccases as the main agents of wastewater decolourization by P. ostreatus. A laccase mixture was immobilized by entrapment in Cu-alginate beads, and the immobilized enzymes were shown to be effective in batch decolourization, even after 15 stepwise additions of dye for a total exposure of about 1 month.     

l-Dopa synthesis using tyrosinase immobilized on magnetic beads

Magnetic beads were prepared via suspension polymerization of glycidyl methacrylate (GMA) and methyl methacrylate (MMA) in the presence of ferric ions. Following polymerization, thermal co-precipitation of the Fe(III) ions in the beads with Fe(II) ions under alkaline condition resulted in encapsulation of Fe₃O₄ nano-crystals within the polymer matrix. The magnetic beads were activated with glutaraldehyde, and tyrosinase enzyme was covalently immobilized on the support via reaction of amino groups under mild conditions. The immobilized enzyme was used for the synthesis of l-Dopa (1-3,4-dihydroxy phenylalanine) which is a precursor of dopamine. The immobilized enzyme was characterized by temperature, pH, operational and storage stability experiments. Kinetic parameters, maximum velocity of the enzyme (V_max) and Michaelis–Menten constant (K_m) values were determined as 1.05 U/mg protein and 1.0 mM for 50–75 μm and 2.00 U/mg protein and 4.0 mM for 75–150 μm beads fractions, respectively. Efficiency factor and catalytic efficiency were found to be 1.39 and 0.91 for 75–150 μm beads and 0.73 and 0.75 for 50–75 μm beads fractions, respectively. The catalytic efficiency of the soluble tyrosinase was 0.37. The amounts of immobilized protein were on the 50–75 μm and 75–150 μm fractions were 2.7 and 2.8 mg protein/g magnetic beads, respectively.     

Reactive blue 19 decolouration by laccase immobilized on silica beads

Laccase (31.5 U of activity/g or 4.39 μg of protein/m²) from Trametes versicolor was immobilized on controlled-porosity-carrier silica beads and evaluated for the decolouration of Reactive blue 19, an anthraquinone dye. Although there was an initial, rapid adsorption of the dye to the packed bed in a recirculating reactor, about 97.5% of Reactive blue 19 removal was due to enzymatic degradation. The free enzyme lost 52% of its activity in 48 h. However, the activity of the immobilized laccase was unchanged after 4 months of storage in phosphate buffer under ambient conditions followed by three successive decolourations over 120 h. Treating the laccase immobilized beads with ethanolamine reduced dye adsorption by 40%.     

Immobilization of α-amylase from mung beans (Vigna radiata) on Amberlite MB 150 and chitosan beads: A comparative study

α-Amylase from mung beans (Vigna radiata) was immobilized on two different matrices, Amberlite MB 150 and chitosan beads. Maximum immobilization obtained was 72% and 69% in case of Amberlite and chitosan beads, respectively. The pH optima of soluble α-amylase were 5.6, whereas that for immobilized amylase on chitosan and Amberlite was 7.0. Soluble amylase and Amberlite immobilized amylase showed maximum activity at 65 °C, whereas chitosan immobilized amylase showed maximum activity at 75 °C. α-Amylase immobilized on Amberlite showed apparent K_m of 2.77 mg/ml, whereas α-amylase immobilized on chitosan showed an apparent K_m of 5 mg/ml. The Amberlite-amylase and chitosan-amylase showed a residual activity of 43% and 27%, respectively, after 10 uses. The loss of activity for free amylase after 100 days of storage at 4 °C was 70%, whereas that for Amberlite- and chitosan-amylases, under the same experimental conditions, the losses were 45% and 55%, respectively. The easy availability of mung bean α-amylase, the ease of its immobilization on low-cost matrices and good stability upon immobilization in the present study makes it a suitable product for further use in industrial applications.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

桦褶孔菌漆酶固定化及其对染料的降解

采用壳聚糖交联法和海藻酸钠-壳聚糖包埋交联法固定化桦褶孔菌产生的漆酶,探讨最佳固定化条件,固定化漆酶的温度,pH稳定性及操作稳定性,并以两种固定化酶分别对4种染料进行了降解.结果表明:(1)壳聚糖交联法固定化漆酶的最佳条件为:壳聚糖2.5%,戊二醛7%,交联时间2h,固定化时间5h,给酶量1g壳聚糖小球:1mL酶液(1U/mL),固定化效率56%;(2)海藻酸钠-壳聚糖包埋交联法固定化漆酶的最佳条件为:海藻酸钠浓度4%,壳聚糖浓度0.7%,氯化钙浓度5%,戊二醛浓度0.6%,给酶量4mL 4%海藻酸钠:1mL酶液(1U/mL),固定化效率高达86%;(3)固定化的漆酶相比游离漆酶有更好的温度和pH稳定性;(4)比较两种固定化漆酶,海藻酸钠-壳聚糖包埋交联法固定化酶的温度及酸度稳定性要优于壳聚糖固定化酶,但可重复操作性要弱于后者,两者重复使用8次后的剩余酶活比率分别为71%及64%;(5)两种固定化酶对所选的4种不同结构的合成染料均有较好的降解效果,其中壳聚糖固定化酶对茜素红的降解效果及重复使用性极佳,重复降解40mg/L的茜素红10次,降解率仍保持在100%.     

Immobilization of laccase onto spacer-arm attached non-porous poly(GMA/EGDMA) beads: application for textile dye degradation

Non-porous poly(glycidyl methacrylate/ethyleneglycol dimetacrylate) (poly(GMA/EGDMA)) beads were prepared by suspension polymerization. The enzyme (i.e. laccase) was covalently immobilized onto plain and spacer-arm attached poly(GMA/EGDMA) beads. The amount of immobilized enzyme on the plain and spacer-arm attached beads was determined as 5.6 and 4.9 mg/g, respectively. The maximum activity (V(max)) and Michaelis constant (K(m)) of laccase immobilized on the spacer-arm attached beads, were found to be 77.6 U/min and 0.47 mM, respectively. Finally, the immobilized laccase was operated in a batch system, and textile dye Reactive Red 120 was successfully decolorized in the enzyme reactor.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

De-colourization of textile effluent using immobilized Geotrichum candidum: an insight into mycoremediation

Textile effluent is generally complicated to manage because of its extremely noxious and recalcitrant coloured compositions. Mycoremediation is an extensively used strategy for the competent degradation of hazardous pollutants present in textile effluent. Fungus could be immobilized in synthetic or natural matrices. The current study shows the decolourization of the textile effluent by 85·5 and 98·5% within 6 h using suspended and immobilized fungus, Geotrichum candidum with optimized parameters like inoculum size (5%), pH (4·5), and temperature (30°C). To maintain a high biomass of fungal population and enhance the retention of fungal strain in the contaminated sites, the fungi need to be immobilized. Hence, the fungus was immobilized naturally onto the selected inert support that is, coconut fibres by the means of adsorption, where they grew as active films on the fibres after being grown in the culture broth. The optimized process parameters of inoculum size, fibre quantity and agitation speed for immobilized G. candidum were 5%, 2·2 g l⁻¹ of effluent and 100 rev min⁻¹ respectively. High level of laccase (22 and 25 U l⁻¹ in suspended and immobilized fungal cells treatment respectively) was observed during the process of decolourization and it was found that decolourization was directly proportional to the laccase activity. The UV–vis, FTIR, ¹H NMR and GC-MS analyses of treated textile industrial wastewater revealed the degradation of toxic pollutants in the textile effluent and formation of lower molecular weight intermediates. The study revealed a higher efficacy of immobilized G. candidum in comparison to suspended fungal culture, employing ligninolytic enzyme laccase, which catalyzes the degradation/transformation of aromatic dyes in the textile effluent thus decolourizing it.     

White‐rot fungi combined with lignite granules and lignitic xylite to decolorize textile industry wastewater

The feasibility of using immobilized fungi to decolorize textile industry wastewater containing dyes was examined in experiments with: two species of white‐rot fungi (a Marasmius species from Indonesia, which produces copious biomass, and Trametes hirsuta, which produces high levels of laccase); two types of lignite products as adsorbents and solid substrates (lignitic xylite and lignite granules); and four simulated wastewaters, each containing a different kinds of reactive textile azo dye. The growth, extracellular enzyme production, dye degradation and dye absorption parameters afforded by each permutation of fungus, substrate and dye were then measured. Both fungal species grew poorly on xylite, but much better on lignite granules. Marasmius sp. produced up to 67 U/L laccase on lignite granules, but just 10 U/L on xylite, and no other detectable extracellular enzymes. T. hirsuta produced 1343 U/L laccase and up to 12 U/L unspecific peroxidase when immobilized on lignite granules, and 898 U/L laccase with 14 U/L unspecific peroxidase when immobilized on xylite. The amount of color lost from the dye solutions depended on both the type of dye and the enzyme levels in the fermenter.     

Degradation of chloroform by immobilized cells of <Emphasis Type="Italic">Bacillus</Emphasis> sp. in calcium alginate beads

A Bacillus sp., capable of degrading chloroform, was immobilized in calcium alginate. The beads in 20 g alginate l⁻¹ (about 2 × 10⁸ cells/bead) could be re-used nine times for degradation of chloroform at 40 μM. The immobilized cells had a higher range of tolerance (pH 6.5–9 and 20–41°C) than free cells (pH 7–8.5 and 28–32°C). At 5 g alginate l⁻¹, leakage of the cells from the beads was 0.51 mg dry wt ml⁻¹. This species is the first reported Bacillus that can degrade chloroform as the sole carbon source.     

Immobilization of laccase from Streptomyces psammoticus and its application in phenol removal using packed bed reactor

Laccase was produced from Streptomyces psammoticus under solid-state fermentation. The enzyme was partially purified by ammonium sulphate precipitation and was immobilized in alginate beads by entrapment method. Calcium alginate beads retained 42.5% laccase activity, while copper alginate beads proved a better support for laccase immobilization by retaining 61% of the activity. Phenol and colour removal from a phenol model solution was carried out using immobilized laccase. Batch experiments were performed using packed bed bioreactor, containing immobilized beads. Reusability of the immobilized matrix was studied for up to 8 successive runs, each run with duration of 6 h. The system removed 72% of the colour and 69.9% of total phenolics from the phenol model solution after the initial run. The immobilized system maintained 50% of its efficiency after eight successive runs. The degradation of phenolic compounds by immobilized laccase was evaluated and confirmed by Thin layer chromatography and nuclear magnetic resonance spectroscopy.     

α-<Emphasis Type="SmallCaps">l</Emphasis>-Rhamnosidase of <Emphasis Type="Italic">Aspergillus terreus</Emphasis> immobilized on ferromagnetic supports

α-l-Rhamnosidase from Aspergillus terreus was covalently immobilized on the following ferromagnetic supports: polyethylene terephthalate (Dacron-hydrazide), polysiloxane/polyvinyl alcohol (POS/PVA), and chitosan. The powdered supports were magnetized by thermal coprecipitation method using ferric and ferrous chlorides, and the immobilization was carried out via glutaraldehyde. The activity of the Dacron-hydrazide (0.53 nkat/μg of protein) and POS/PVA (0.59 nkat/μg of protein) immobilized enzyme was significantly higher than that found for the chitosan derivative (0.06 nkat/μg of protein). The activity–pH and activity–temperature profiles for all immobilized enzymes did not show difference compared to the free enzyme, except the chitosan derivative that presented higher maximum temperature at 65 °C. The Dacron-hydrazide derivative thermal stability showed a similar behavior of the free enzyme in the temperature range of 40–70 °C. The POS/PVA and chitosan derivatives were stable up to 60 °C, but were completely inactivated at 70 °C. The activity of the preparations did not appreciably decrease after ten successive reuses. Apparent K _m of α-l-rhamnosidase immobilized on magnetized Dacron-hydrazide (1.05 ± 0.22 mM), POS/PVA (0.57 ± 0.09 mM), and chitosan (1.78 ± 0.24 mM) were higher than that estimated for the soluble enzyme (0.30 ± 0.03 mM). The Dacron-hydrazide enzyme derivative showed better performance than the free enzyme to hydrolyze 0.3% narigin (91% and 73% after 1 h, respectively) and synthesize rhamnosides (0.116 and 0.014 mg narirutin after 1 h, respectively).     

Reversible immobilization of uricase on conductive polyaniline brushes grafted on polyacrylonitrile film

Polyacrylonitrile film (PAN) surfaces were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The conductive films were used for immobilization of uricase. The surface resistance of the conductive film in this work was found to be 0.97 kΩ/cm. The maximum amount of immobilized enzyme on conductive film containing 2.4% PANI was about 216 μg/cm². The optimum pH for free and immobilized enzymes was observed at 7.0 and 7.5, respectively. The K _m values for free and immobilized uricase were found to be 94 and 138 μM, respectively. V _max values were calculated as 1.87 and 1.63 U/mg protein for the free and immobilized enzymes, respectively. Immobilized uricase exhibited ~68% of its original activity even after 2 months of storage at 4 °C while the free enzyme lost its initial activity within 4 weeks.     

Indigo production in hairy root cultures of Polygonum tinctorium Lour.

The transformed root culture of Polygonum tinctorium Lour. was established by infecting leaf explants with Agrobacterium rhizogenes A4. These cultures were examined for their growth and indigo content under various culture conditions. Among the four different culture media tested, SH medium showed the highest yield for root growth (28 mg dry wt/30 ml) and indigo production (152 g/dry wt). In SH medium, 30 g sucrose l^–1, 2500 mg KNO₃ l^–1, 300 mg NH₄H₂PO₄ l^–1 were the best conditions for indigo production at pH 5.7. The production of indigo in hairy roots slightly increased with the addition of 200 mg chitosan l^–1 (186 g/dry wt) and 20 U pectinase l^–1 (181 g/dry wt).     

Dye decolorization by <Emphasis Type="Italic">Trametes hirsuta</Emphasis> immobilized into alginate beads

Summary The present paper studies the production of laccase by Trametes hirsuta immobilized into alginate beads in an airlift bioreactor. In order to enhance laccase production fresh ammonium chloride was added, which led to the production, of high laccase activities (around 1000 U l⁻¹). The bioreactor operated for 40 days without operational problems and the bioparticles maintained their shape throughout fermentation. Dye decolorization was performed at bioreactor scale operating in the batch mode. High decolorization percentages were obtained in a short time (96% for indigo carmine and 69% for phenol red in 24 h), indicating the suitability of this process for application to synthetic dye decolorization. On the other hand, in vitro decolorization of several industrial azo dyes by crude laccase produced in the above bioreactor was also performed. It was found that some of the dyes needed the addition of 1-hydroxybenzotriazole for their decolorization.     

Enhanced plumbagin production from in vitro cultures of <Emphasis Type="Italic">Drosera burmanii</Emphasis> using elicitation

Methyl jasmonate, 50 μM, 0.5 mg yeast extract/l and 100 mg chitosan/l stimulated plumbagin production in Drosera burmanii whole plant cultures after 6 days of elicitation. Yeast extract (0.5 mg/l) was the most efficient enhancing plumbagin production in roots of D. burmanii to 8.8 ± 0.5 mg/g dry wt that was 3.5-fold higher than control plants.     

Decolorizing Reactive Textile Dyes with White‐Rot Fungi by Temporary Immersion Cultivation

The decontamination of effluents from textile industries is problematic due to the fact that textile dyes are resistant to degradation in the environment. Enzymes from white rot fungi, especially laccase, are able to degrade various complex aromatic structures, and are therefore able to decolorize textile dyes. The white‐rot fungi Trametes versicolor and Phanerochaete chrysosporium were immobilized, separately, on both pine wood chips and palm oil fiber, and cultivated in the temporary immersion RITA® (Récipient à Immersion Temporaire Automatique) System, which was adapted to serve as a fungal bioreactor in a series of four experiments to determine optimal conditions for decolorizing the textile dyes Levafix Blue and Remazol Brilliant Red. The maximum rate of decolorization of both dyes occurred within 24 h of incubation, and laccase was detected in the system.