Improved Skin Penetration Using <Emphasis Type="Italic">In Situ</Emphasis> Nanoparticulate Diclofenac Diethylamine in Hydrogel Systems: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Studies

Delivering diclofenac diethylamine transdermally by means of a hydrogel is an approach to reduce or avoid systemic toxicity of the drug while providing local action for a prolonged period. In the present investigation, a process was developed to produce nanosize particles (about 10 nm) of diclofenac diethylamine in situ during the development of hydrogel, using simple mixing technique. Hydrogel was developed with polyvinyl alcohol (PVA) (5.8% w/w) and carbopol 71G (1.5% w/w). The formulations were evaluated on the basis of field emission scanning electron microscopy, texture analysis, and the assessment of various physiochemical properties. Viscosity (163–165 cps for hydrogel containing microsize drug particles and 171–173 cps for hydrogel containing nanosize drug particles, respectively) and swelling index (varied between 0.62 and 0.68) data favor the hydrogels for satisfactory topical applications. The measured hardness of the different hydrogels was uniform indicating a uniform spreadability. Data of in vitro skin (cadaver) permeation for 10 h showed that the enhancement ratios of the flux of the formulation containing nanosize drug (without the permeation enhancer) were 9.72 and 1.30 compared to the formulation containing microsized drug and the marketed formulations, respectively. In vivo plasma level of the drug increased predominantly for the hydrogel containing nanosize drug-clusters. The study depicts a simple technique for preparing hydrogel containing nanosize diclofenac diethylamine particles in situ, which can be commercially viable. The study also shows the advantage of the experimental transdermal hydrogel with nanosize drug particles over the hydrogel with microsize drug particles.     

Development of Microemulsions and Microemulgels for Enhancing Transdermal Delivery of <Emphasis Type="Italic">Kaempferia parviflora</Emphasis> Extract

The purpose of this research was to develop microemulsions (ME) and microemulgels (MG) for enhancing transdermal delivery of Kaempferia parviflora (KP) extract. The methoxyflavones were used as markers. Various formulations of ME and MG containing 10% w/v KP extract were prepared, and the in vitro skin permeation and deposition were investigated. The potential ME system containing oleic acid (5% w/v), Tween 20 (20% w/v), PG (40% w/v), and water (35% w/v) was successfully formulated. ME with 10% w/v limonene (ME-L10%) showed higher methoxyflavones flux than ME-L5%, ME-L1%, ME without limonene, and KP extract in water, respectively. ME-L10% was selected for adding a gelling agent to form microemulgels (MG-L10%). However, the high viscosity of the gel formulation might control the diffusion of the compound from gel layer into the skin. Therefore, the liquid formulation provided potential ME droplets to deliver KP extract through the skin. Limonene also plays an effective role on the skin permeation, in which the histological image of the skin treated with ME-L10% exhibited larger space of each flattened keratinocyte layer in the stratum corneum compared to the skin treated with KP extract in water. Moreover, ME-L10% showed good stability. Therefore, ME-L10% was a potential formulation for improving transdermal delivery of KP extract.     

Pharmacokinetic Evaluation of Improved Oral Bioavailability of Valsartan: Proliposomes <Emphasis Type="Italic">Versus</Emphasis> Self-Nanoemulsifying Drug Delivery System

The objective of this study was to develop proliposomes and self-nanoemulsifying drug delivery system (SNEDDS) for a poorly bioavailable drug, valsartan, and to compare their in vivo pharmacokinetics. Proliposomes were prepared by thin-film hydration method using different lipids such as soy phosphatidylcholine (SPC), hydrogenated soy phosphatidylcholine (HSPC), distearyl phosphatidylcholine (DSPC), dimyristoylphosphatidylcholine (DMPC), and dimyristoyl phosphatidylglycerol sodium (DMPG) and cholesterol in various ratios. SNEDDS formulations were prepared using varying concentrations of capmul MCM, labrafil M 2125, and Tween 80. Both proliposomes and SNEDDS were evaluated for particle size, zeta potential, in vitro drug release, in vitro permeability, and in vivo pharmacokinetics. In vitro drug release was carried out in purified water and 0.1 N HCl using USP type II dissolution apparatus. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA) and everted rat intestinal permeation techniques. Among the formulations, the proliposomes with drug/DMPG/cholesterol in the ratio of 1:1:0.5 and SNEDDS with capmul MCM (16.0% w/w), labrafil M 2125 (64.0% w/w), and Tween 80 (18.0% w/w) showed the desired particle size and zeta potential. Enhanced drug release was observed with proliposomes and SNEDDS as compared to pure valsartan. Valsartan permeability across PAMPA and everted rat intestinal permeation models was significantly higher with proliposomes and SNEDDS. Following single oral administration of proliposomes and SNEDDS, a relative bioavailability of 202.36 and 196.87%, respectively, was achieved compared to pure valsartan suspension. The study results indicated that both proliposomes and SNEDDS formulations are comparable in improving the oral bioavailability of valsartan.     

Strain-specific response to ampicillin in <Emphasis Type="Italic">Wolbachia-</Emphasis>infected mosquito cell lines

Wolbachia pipientis (Rickettsiales; Anaplasmataceae) is an obligate intracellular alpha proteobacterium that occurs in arthropods and filarial worms. Some strains of Wolbachia can be maintained as persistent infections in insect cell lines. C/wStr1 cells from the mosquito Aedes albopictus maintain a robust infection with Wolbachia strain wStr, originally isolated from the planthopper, Laodelphax striatellus. To explore possible functions of penicillin-binding proteins expressed from the wStr genome, C/wStr1 cells were exposed to ampicillin. Absolute levels of Wolbachia increased 3.5-fold in ampicillin-treated cells and fivefold in naive cells newly infected with wStr. Because cell numbers were depressed by ampicillin treatment, Wolbachia yield on a per-cell basis increased by 15-fold. The absence of a similar effect on wAlbB in Aa23 host cells suggests that the Wolbachia strain, the presence/absence of genes encoding penicillin-binding proteins, or the interaction between wAlbB and its host cells may modulate the effects of ampicillin.     

Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Lipid-Based Terbutaline Sulphate Bi-layer Tablets for Once-Daily Administration

The objective of this study was to prepare and evaluate terbutaline sulphate (TBS) bi-layer tablets for once-daily administration. The bi-layer tablets consisted of an immediate-release layer and a sustained-release layer containing 5 and 10 mg TBS, respectively. The sustained-release layer was developed by using Compritol®888 ATO, Precirol® ATO 5, stearic acid, and tristearin, separately, as slowly eroding lipid matrices. A full 4?×?2² factorial design was employed for optimization of the sustained-release layer and to explore the effect of lipid type (X ₁), drug–lipid ratio (X ₂), and filler type (X ₃) on the percentage drug released at 8, 12, and 24 h (Y ₁, Y ₂, and Y ₃) as dependent variables. Sixteen TBS sustained-release matrices (F1–F16) were prepared by melt solid dispersion method. None of the prepared matrices achieved the targeted release profile. However, F2 that showed a relatively promising drug release was subjected to trial and error optimization for the filler composition to develop two optimized matrices (F17 and F18). F18 which consisted of drug–Compritol®888 ATO at ratio (1:6 w/w) and Avicel PH 101/dibasic calcium phosphate mixture of 2:1 (w/w) was selected as sustained-release layer. TBS bi-layer tablets were evaluated for their physical properties, in vitro drug release, effect of storage on drug content, and in vivo performance in rabbits. The bi-layer tablets showed acceptable physical properties and release characteristics. In vivo absorption in rabbits revealed initial high TBS plasma levels followed by sustained levels over 24 h compared to immediate-release tablets.     

Colon-Targeted Delivery of IgY Against <Emphasis Type="Italic">Clostridium difficile</Emphasis> Toxin A and B by Encapsulation in Chitosan-Ca Pectinate Microbeads

This study investigated the use of a newly developed chitosan-Ca pectinate microbead formulation for the colon-targeted delivery of anti-A/B toxin immunoglobulin of egg yolk (IgY) to inhibit toxin binding to colon mucosa cells. The effect of the three components (pectinate, calcium chloride, and chitosan) used for the microbead production was examined with the aim of identifying the optimal levels to improve drug encapsulation efficiency, swelling ratio, and cumulative IgY release rate. The optimized IgY-loaded bead component was pectin 5% (w/v), CaCl₂ 3% (w/v), and chitosan 0.5% (w/v). Formulated beads were spherical with 1.2-mm diameter, and the drug loading was 45%. An in vitro release study revealed that chitosan-Ca pectinate microbeads inhibited IgY release in the upper gastrointestinal tract and significantly improved the site-specific release of IgY in the colon. An in vivo rat study demonstrated that 72.6% of biologically active IgY was released specifically in the colon. These results demonstrated that anti-A/B toxin IgY-loaded chitosan-Ca pectinate oral microbeads improved IgY release behavior in vivo, which could be used as an effective oral delivery platform for the biological treatment of Clostridium difficile infection (CDI).     

Effects of Partial Replacement of Gelatin in High Sugar Gels with Gellan on their Textural,Rhelogical, and Thermal Properties

Effects of partial replacement of gelatin in simulated gummy confections with either high acyl or deacylated gellan on their textural, rheological, and thermal properties were investigated. Atomic force microscopy (AFM) images of high acyl and deacylated gellan revealed that both gellan types formed finely stranded networks as a result from air-drying of dilute aqueous solutions, the strand thickness of which was approximately 0.5–1 nm. Simulated gummy confections containing 5.025–7.1 % w/w gelatin, 0–0.075 % w/w high acyl or deacylated gellan, and 73–75 % w/w corn syrup and sucrose combined were prepared and analyzed using texture profile analysis (TPA) and small amplitude oscillatory shear measurements. The principal component analysis (PCA) of textural attributes obtained from TPA identified a cluster in the first quadrant formed by samples containing 7.1 % w/w gelatin but no gellan and those containing 6.025 % w/w gelatin and 0.075 % w/w high acyl or deacylated gellan. All simulated gummy confections showed storage modulus (G′) values greater than loss modulus (G″) values at 0.1 rad/s, G″ increasing more steeply with increasing angular frequency, and G′-G″ crossovers within the examined angular frequency range (0.1–100 rad/s), typical of high solid biopolymer gels. Furthermore, increasing gellan concentration at a total concentration of the gelling agents (i.e., gelatin and gellan) of 6.1 % w/w increased the melting temperature. These results attest the feasibility of improving the heat stability of gummy confections by the partial replacement of gelatin with either high acyl or deacylated gellan with maintaining textures characteristics of gummy confections containing gelatin as the only gelling agent.     

Effect of Percent Relative Humidity,Moisture Content,and Compression Force on Light-Induced Fluorescence (LIF) Response as a Process Analytical Tool

The effect of percent relative humidity (16–84% RH), moisture content (4.2–6.5% w/w MC), and compression force (4.9–44.1 kN CF) on the light-induced fluorescence (LIF) response of 10% w/w active pharmaceutical ingredient (API) compacts is reported. The fluorescent response was evaluated using two separate central composite designs of experiments. The effect of % RH and CF on the LIF signal was highly significant with an adjusted R ² ?=?0.9436 and p?<?0.0001. Percent relative humidity (p?=?0.0022), CF (p?<?0.0001), and % RH² (p?=?0.0237) were statistically significant factors affecting the LIF response. The effects of MC and CF on LIF response were also statistically significant with a p value <0.0001 and adjusted R ² value of 0.9874. The LIF response was highly impacted by MC (p?<?0.0001), CF (p?<?0.0001), and MC² (p?=?0022). At 10% w/w API, increased % RH, MC, and CF led to a nonlinear decrease in LIF response. The derived quadratic model equations explained more than 94% of the data. Awareness of these effects on LIF response is critical when implementing LIF as a process analytical tool.     

Novel Jojoba Oil-Based Emulsion Gel Formulations for Clotrimazole Delivery

Jojoba oil-based emulgel formulations were prepared using different concentrations of various gelling agents, such as hydroxypropyl methylcellulose (HPMC) and Carbopol 934 P and combination of both. The prepared emulgels were physically evaluated for their stability after temperature cycle test, centrifugation and long-term shelf storage for 1 year at room temperature. The in vitro release at 37°C was studied to define the effect of the concentration and type of the gelling agent. A comparison between the formulated emulgels and two commercially available products, Candistan® and Canesten® creams, was carried out to judge their efficacy and stability. The prepared emulgels exhibited non-Newtonian shear thinning behavior with little or no thixotropy. Four emulgels showed excellent stability as they demonstrated consistent rheological model under different treatment conditions. The in vitro release test showed variation in the extent of percent drug released. The drug release from the commercial preparation was lower than some of the prepared emulgel formulae. One formula containing combination of the two gelling agents (HPMC and Carbopol 934 P), showed excellent stability and high extent of clotrimazole release was microbiologically evaluated against Candida albicans using cylinder and plate method. The selected formula showed superior antimycotic activity compared to the commercially available formulation. Further in vivo animal studies for the obtained stable formula is recommended.     

Lidocaine-loaded fish scale-nanocellulose biopolymer composite microneedles

Microneedle (MN) technology has emerged as an effective drug delivery system, and it has tremendous potential as a patient friendly substitute for conventional methods for transdermal drug delivery (TDD). In this paper, we report on the preparation of lidocaine-loaded biodegradable microneedles, which are manufactured from fish scale-derived collagen. Lidocaine, a common tissue numbing anaesthetic, is loaded in these microneedles with an aim of delivering the drug with controlled skin permeation. Evaluation of lidocaine permeation in porcine skin has been successfully performed using Franz diffusion cell (FDC) which has shown that the drug permeation rate increases from 2.5 to 7.5% w/w after 36 h and pseudo steady state profile is observed from 5.0 to 10.0% w/w lidocaine-loaded microneedle. Swelling experiments have suggested that the microneedles have negligible swellability which implies that the patch would stick to the tissue when inserted. The experiments on MN dissolution have depicted that the lidocaine loaded in the patch is lower than the theoretical loading, which is expected as there can be losses of the drug during initial process manufacture.     

Inhalable Ipratropium Bromide Particle Engineering with Multicriteria Optimization

Spray-dried ipratropium bromide (IPB) microspheres for oral inhalation were engineered using Quality by Design. The interrogation of material properties, process parameters, and critical product quality attributes interplay enabled rational product design. A 2^7–3 screening design exhibited the Maillard reaction between L-leucine (LL) and lactose at studied outlet temperatures (OT) >130°C. A response surface custom design was used in conjunction with multicriteria optimization to determine the operating design space to achieve inhalable microparticles. Statistically significant predictive models were developed for volume median diameter (p?=?0.0001, adjusted R ²? =?0.9938), span (p?=?0.0278, adjusted R ²? =?0.7912), yield (p?=?0.0020, adjusted R ²? =?0.9320), and OT (p?=?0.0082, adjusted R ²? =?0.8768). An independent verification batch confirmed the model’s predictive capability. The prediction and actual values were in good agreement. Particle size and span were 3.32?±?0.09 μm and 1.71?±?0.18, which were 4.7 and 5.3% higher than the predicted values. The process yield was 50.3%, compared to the predicted value of 65.3%. The OT was 100°C versus the predicted value of 105°C. The label strength of IPB microparticles was 99.0 to 105.9% w/w suggesting that enrichment occurred during the spray-drying process. The present study can be utilized to initiate the design of the first commercial IPB dry powder inhaler.     

The Plant Alkaloid Camptothecin as a Novel Antifouling Compound for Marine Paints: Laboratory Bioassays and Field Trials

The extensive use of copper and booster biocides in antifouling (AF) paints has raised environmental concerns and the need to develop new AF agents. In the present study, 18 alkaloids derived from terrestrial plants were initially evaluated for AF activity using laboratory bioassays with the bryozoan Bugula neritina and the barnacle Balanus albicostatus. The results showed that 4 of the 18 alkaloids were effective in inhibiting larval settlement of B. neritina, with an EC₅₀ range of 6.18 to 43.11 μM, and 15 of the 18 alkaloids inhibited larval settlement of B. albicostatus, with EC₅₀ values ranging from 1.18 to 67.58 μM. Field trials that incorporated five alkaloids respectively into paints with 20% w/w indicated an in situ AF efficiency of evodiamine, strychnine, camptothecin (CPT), and cepharanthine, with the most potent compound being CPT, which also exhibited stronger AF efficiency than the commercial antifoulants cuprous oxide and zinc pyrithione in the field over a period of 12 months. Further field trials with different CPT concentrations (0.1 to 20% w/w) in the paints suggested a concentration-dependent AF performance in the natural environment, and the effective concentrations to significantly inhibit settlement of biofoulers in the field were ≥?0.5% w/w (the efficiency of 0.5% w/w lasted for 2 months). Moreover, CPT toxicity against the crustacean Artemia salina, the planktonic microalgae Phaeodactylum tricornutum and Isochrysis galbana, was examined. The results showed that 24 h LC₅₀ of CPT against A. salina was 20.75 μM, and 96 h EC₅₀ (growth inhibition) values of CPT to P. tricornutum and I. galbana were 55.81 and 6.29 μM, respectively, indicating that CPT was comparatively less toxic than several commercial antifoulants previously reported. Our results suggest the novel potential application of CPT as an antifoulant.     

Temperature-induced changes in treatment efficiency and microbial structure of aerobic granules treating landfill leachate

This paper investigates the effect of temperature on nitrogen and carbon removal by aerobic granules from landfill leachate with a high ammonium concentration and low concentration of biodegradable organics. The study was conducted in three stages; firstly the operating temperature of the batch reactor with aerobic granules was maintained at 29 °C, then at 25 °C, and finally at 20 °C. It was found that a gradual decrease in operational temperature allowed the nitrogen-converting community in the granules to acclimate, ensuring efficient nitrification even at ambient temperature (20 °C). Ammonium was fully removed from leachate regardless of the temperature, but higher operational temperatures resulted in higher ammonium removal rates [up to 44.2 mg/(L h) at 29 °C]. Lowering the operational temperature from 29 to 20 °C decreased nitrite accumulation in the GSBR cycle. The highest efficiency of total nitrogen removal was achieved at 25 °C (36.8 ± 10.9 %). The COD removal efficiency did not exceed 50 %. Granules constituted 77, 80 and 83 % of the biomass at 29, 25 and 20 °C, respectively. Ammonium was oxidized by both aerobic and anaerobic ammonium-oxidizing bacteria. Accumulibacter sp., Thauera sp., cultured Tetrasphaera PAO and Azoarcus–Thauera cluster occurred in granules independent of the temperature. Lower temperatures favored the occurrence of denitrifiers of Zooglea lineage (not Z. resiniphila), bacteria related to Comamonadaceae, Curvibacter sp., Azoarcus cluster, Rhodobacter sp., Roseobacter sp. and Acidovorax spp. At lower temperatures, the increased abundance of denitrifiers compensated for the lowered enzymatic activity of the biomass and ensured that nitrogen removal at 20 °C was similar to that at 25 °C and significantly higher than removal at 29 °C.     

Effect of Water Content on the Glass Transition Temperature of Calcium Maltobionate and its Application to the Characterization of Non-Arrhenius Viscosity Behavior

To understand the fundamental physical properties of calcium maltobionate (MBCa), its water sorption isotherm, glass transition temperature (T _g), and viscosity (η) were investigated and compared with those of maltobionic acid (MBH) and maltose. Although amorphous maltose crystalized at water activity (a _w) higher than 0.43, MBCa and MBH maintained an amorphous state over the whole a _w range. In addition, MBCa had a higher T _g and greater resistance to water plasticizing than MBH and maltose. These properties of MBCa likely originate from the strong interaction between MBCa and water induced by electrostatic interactions. Moreover, the effects of temperature and water content on η of an aqueous MBCa solution were evaluated, and its behavior was described using a semi-empirical approach based on a combination of T _g extrapolated by the Gordon-Taylor equation and a non-Arrhenius formula known as the Vogel–Fulcher–Tammann equation. This result will be useful for understating the effect of MBCa addition on the solution’s properties.     

Novel Polyurethane Matrix Systems Reveal a Particular Sustained Release Behavior Studied by Imaging and Computational Modeling

The aim of the present work was to better understand the drug-release mechanism from sustained release matrices prepared with two new polyurethanes, using a novel in silico formulation tool based on 3-dimensional cellular automata. For this purpose, two polymers and theophylline as model drug were used to prepare binary matrix tablets. Each formulation was simulated in silico, and its release behavior was compared to the experimental drug release profiles. Furthermore, the polymer distributions in the tablets were imaged by scanning electron microscopy (SEM) and the changes produced by the tortuosity were quantified and verified using experimental data. The obtained results showed that the polymers exhibited a surprisingly high ability for controlling drug release at low excipient concentrations (only 10% w/w of excipient controlled the release of drug during almost 8 h). The mesoscopic in silico model helped to reveal how the novel biopolymers were controlling drug release. The mechanism was found to be a special geometrical arrangement of the excipient particles, creating an almost continuous barrier surrounding the drug in a very effective way, comparable to lipid or waxy excipients but with the advantages of a much higher compactability, stability, and absence of excipient polymorphism.     

Experimental Determination and Theoretical Calculation of the Eutectic Composition of Cefuroxime Axetil Diastereomers

Cefuroxime axetil (CFA), an ester prodrug of cefuroxime exists as a pair of diastereoemers, namely isomer A and isomer B. To enable phase diagram construction, crystallization of the diastereomers of CFA from the commercially available amorphous drug substance was carried out. Isomer A was separated with a purity approaching 100% whereas the maximum purity of isomer B was 85% as confirmed by solution state proton NMR spectroscopy. The crystalline forms of isomer A and isomer B were confirmed as forms AI and BI, respectively, based on differential scanning calorimetry (DSC) analysis and powder X-ray diffraction. DSC analysis was used to observe the melting behavior of different diastereomer mixture compositions. The binary solid-liquid phase diagram for mixture compositions ranging from 0 to 85% w/w isomer B indicated the formation of a eutectic mixture having a melting temperature of 124.7?±?0.4°C and a composition of 75% w/w (+/?5% wt.) isomer B. The eutectic composition was calculated using an index based on the van’t Hoff equation for melting point depression and was found to be 75% isomer B and 25% isomer A. As CFA is present in commercial preparations as a mixture of diastereomers, the formation of a eutectic mixture between the diastereomers may impact the solubility and stability of the commercial product. Eutectic formation can be explained on the basis of the chemical similarity of diastereomers that favor miscibility in the liquid state.     

<Emphasis Type="Italic">In silico</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> analysis reveal a novel gene in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> trehalose metabolism

Background

The ability to respond rapidly to fluctuations in environmental changes is decisive for cell survival. Under these conditions trehalose has an essential protective function and its concentration increases in response to enhanced expression of trehalose synthase genes, TPS1, TPS2, TPS3 and TSL1. Intriguingly, the NTH1 gene, which encodes neutral trehalase, is highly expressed at the same time. We have previously shown that trehalase remains in its inactive non-phosphorylated form by the action of an endogenous inhibitor. Recently, a comprehensive two-hybrid analysis revealed a 41-kDa protein encoded by the YLR270w ORF, which interacts with NTH1p.

Results

In this work we investigate the correlation of this Trehalase Associated Protein, in trehalase activity regulation. The neutral trehalase activity in the ylr270w mutant strain was about 4-fold higher than in the control strain. After in vitro activation by PKA the ylr270w mutant total trehalase activity increased 3-fold when compared to a control strain. The expression of the NTH1 gene promoter fused to the heterologous reporter lacZ gene was evaluated. The mutant strain lacking YLR270w exhibited a 2-fold increase in the NTH1-lacZ basal expression when compared to the wild type strain.

Conclusions

These results strongly indicate a central role for Ylr270p in inhibiting trehalase activity, as well as in the regulation of its expression preventing a wasteful futile cycle of synthesis-degradation of trehalose.

     

Locomotor synergies in fish

The kinematic characteristics {f(v), A(v), w(v)} allow a first-approximation representation of locomotor synergies in the swimming of fish: f is the frequency of the transverse oscillations, A is the amplitude of the caudal fin sweep, w is the velocity of the locomotor wave, and v is the locomotion speed. The additional compared characteristics included the step length L(v) and the wavelength λ(v), where L ≡ vT is the distance covered by the fish during the period T ≡ 1/f, and λ ≡ wT. These kinematic characteristics were derived from video recordings of swimming in six fish species. Three of the species investigated belonged to the anguilliform type, while the three others belonged to the carangiform type. The constant value of the wavelength λ at all speeds v was the common feature of the two types. The anguilliform fish performed a oneparameter version of locomotion control: the locomotion speed v changed due to the change of the wave velocity w and the undulatory amplitude remained constant. The carangioid fish used a two-parameter version of control, with changes in both the wave velocity w and the amplitude of undulations of the body and tail fin.