Design of β‐galactosidase/silica biocatalysts: Impact of the enzyme properties and immobilization pathways on their catalytic performance

The use of heterogeneous biocatalysis in industrial applications is advantageous and the enzyme stability improvement is a continuous challenge. Therefore, we designed β‐galactosidase heterogeneous biocatalysts by immobilization, involving the support synthesis and enzyme selection (from Bacillus circulans, Kluyveromyces lactis, and Aspergillus oryzae). The underivatized, tailored, macro‐mesoporous silica exhibited high surface area, offered high enzyme immobilization yields and activity. Its chemical activation with glyoxyl groups bound the enzyme covalently, which suppressed lixiviation and conferred higher pH and thermal stability (120‐fold than for the soluble enzyme), without observable reduction of activity/stability due to the presence of silica. The best balance between the immobilization yield (68%), activity (48%), and stability was achieved for Bacillus circulans β‐galactosidase immobilized on glyoxyl‐activated silica, without using stabilizing agents or modifying the enzyme. The enzyme stabilization after immobilization in glyoxyl‐activated silica was similar to that observed in macroporous agarose‐glyoxyl support, with the reported microbiological and mechanical advantages of inorganic supports. The whey lactolysis at pH 6.0 and 25°C by using this catalyst (1 mg ml^?1, 290 UI g^?1) was still 90%, even after 10 cycles of 10 min, in batch process but it could be also implemented on continuous processes at industrial level with similar results.     

Stability and kinetic behavior of immobilized laccase from Myceliophthora thermophila in the presence of the ionic liquid 1‐ethyl‐3‐methylimidazolium ethylsulfate

The use of ionic liquids (ILs) as reaction media for enzymatic reactions has increased their potential because they can improve enzyme activity and stability. Kinetic and stability properties of immobilized commercial laccase from Myceliophthora thermophila in the water‐soluble IL 1‐ethyl‐3‐methylimidazolium ethylsulfate ([emim][EtSO₄]) have been studied and compared with free laccase. Laccase immobilization was carried out by covalent binding on glyoxyl–agarose beads. The immobilization yield was 100%, and the activity was totally recovered. The Michaelis‐Menten model fitted well to the kinetic data of enzymatic oxidation of a model substrate in the presence of the IL [emim][EtSO₄]. When concentration of the IL was augmented, the values of V_max for free and immobilized laccases showed an increase and slight decrease, respectively. The laccase–glyoxyl–agarose derivative improved the laccase stability in comparison with the free laccase regarding the enzymatic inactivation in [emim][EtSO₄]. The stability of both free and immobilized laccase was slightly affected by small amounts of IL (<50%). A high concentration of the IL (75%) produced a large inactivation of free laccase. However, immobilization prevented deactivation beyond 50%. Free and immobilized laccase showed a first‐order thermal inactivation profile between 55 and 70°C in the presence of the IL [emim][EtSO₄]. Finally, thermal stability was scarcely affected by the presence of the IL. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:790–796, 2014     

Improved triglyceride transesterification by circular permuted Candida antarctica lipase B

Lipases represent a versatile class of biocatalysts with numerous potential applications in industry including the production of biodiesel via enzyme‐catalyzed transesterification. In this article, we have investigated the performance of cp283, a variant of Candida antarctica lipase B (CALB) engineered by circular permutation, with a series of esters, as well as pure and complex triglycerides. In comparison with wild‐type CALB, the permutated enzyme showed consistently higher catalytic activity (2.6‐ to 9‐fold) for trans and interesterification of the different substrates with 1‐butanol and ethyl acetate as acyl acceptors. Differences in the observed rates for wild‐type CALB and cp283 are believe to be related to changes in the rate‐determining step of the catalytic cycle as a result of circular permutation. Biotechnol. Bioeng. 2010;105: 44–50. © 2009 Wiley Periodicals, Inc.     

Lipase‐Catalyzed Kinetic Resolution of (±)‐1‐(2‐Furyl) Ethanol in Nonaqueous Media

S‐1‐(2‐Furyl) ethanol serves as an important chiral building block for the preparation of various natural products, fine chemicals, and is widely used in the chemical and pharmaceutical industries. In this work, lipase‐catalyzed kinetic resolution of (R/S)‐1‐(2‐furyl) ethanol using different acyl donors was investigated. Vinyl esters are good acyl donors vis‐à‐vis alkyl esters for kinetic resolution. Among them, vinyl acetate was found to be the best acyl donor. Different immobilized lipases such as Rhizomucor miehei lipase, Thermomyces lanuginosus lipase, and Candida antarctica lipase B were evaluated for this reaction, among which C. antarctica lipase B, immobilized on acrylic resin (Novozym 435), was found to be the best catalyst in n‐heptane as solvent. The effect of various parameters was studied in a systematic manner. Maximum conversion of 47% and enantiomeric excess of the substrate (ee_s) of 89% were obtained in 2 h using 5 mg of enzyme loading with an equimolar ratio of alcohol to vinyl acetate at 60°C at a speed of 300 rpm in a batch reactor. From the analysis of progress curve and initial rate data, it was concluded that the reaction followed the ordered bi–bi mechanism with dead‐end ester inhibition. Kinetic parameters were obtained by using nonlinear regression. This process is more economical, green, and easily scalable than the chemical processes. Chirality 26:286–292, 2014. © 2014 Wiley Periodicals, Inc.     

Kinetics of solvent-free geranyl acetate synthesis by Rhizopus oligosporus NRRL 5905 lipase immobilized on to cross-linked silica

The objective of the present work was to study the kinetics of the solvent-free synthesis of geranyl acetate by a novel lipase (activity 60 U g^?1) made by immobilization of lipase from Rhizopus oligosporous NRRL 5905 on to cross-linked silica gel. Transesterification was performed with vinyl acetate as the acyl donor. Vinyl acetate was used in large excess compared to geraniol, which made the reaction pseudo first order with respect to geraniol and the reaction rate followed Michaelis–Menten kinetics for a single substrate. To obtain the highest yield for geranyl acetate, various relevant physical parameters such as shaking speed, reaction time, enzyme concentration, initial water amount and reaction temperature that influence the activity of lipase were investigated. A maximum molar conversion of 67% was achieved after 48 h of reaction at 30°C, at an enzyme concentration of 25% w/v of reaction mixture. Substrate conversion remained constant for five successive cycles; thereafter the conversion dropped by only 11%. Using a pseudo first-order kinetic model for geranyl acetate synthesis in the absence of organic solvents, apparent K_m and V_max values were evaluated as 60 mM and 141 µmol g^?1 h^?1, respectively.     

Crosslinked aggregates of Rhizopus oryzae lipase as industrial biocatalysts: Preparation, optimization, characterization, and application for enantioselective resolution reactions

Lipase from Rhizopus oryzae (ROL) was immobilized as crosslinked enzyme aggregate (CLEA) via precipitation with ammonium sulfate and simultaneous crosslinking with glutaraldehyde. The optimum conditions of the immobilization process were determined. Lipase CLEAs showed a twofold increase in activity when Tween 80‐pretreated lipase was used for CLEA preparation. CLEAs were shown to have several advantages compared to free lipase. CLEAs were more stable at 50°C and 60°C as well as for a wide range of pH. After incubation at 50°C, CLEA showed 74% of initial activity whereas free enzyme was totally inactivated. Reduction of Schiff bases has been performed for the first time in the CLEA preparation process significantly improving the chemically modified CLEAs' reusability, thus providing an enzyme with high potential for recycling even under aqueous reaction conditions where enzyme leakage is, in general, one of the major problems. The CLEA retained 91% activity after 10 cycles in aqueous medium. The immobilized enzyme was used for kinetic resolution reactions. Results showed that immobilization had an enhancing effect on the conversion (c) as well as on the enantiomeric ratio (E). ROL CLEA displayed five times higher enantioselectivity for the hydrolysis of (R,S)‐1‐phenylethyl acetate and likewise 1.5 times higher enantioselectivity for the transesterification of racemic (R–S)‐1‐phenylethanol with vinylacetate. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 937–945, 2012 This article was published online on June 26, 2012. An edit was subsequently requested. This notice is included in the online and print versions to indicate that both have been corrected [27 June 2012].     

Lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NCIM 1207: A Potential Biocatalyst for Synthesis of Isoamyl Acetate

Commercial lipase preparations and mycelium bound lipase from Aspergillus niger NCIM 1207 were used for esterification of acetic acid with isoamyl alcohol to obtain isoamyl acetate. The esterification reaction was carried out at 30°C in n-hexane with shaking at 120 rpm. Initial reaction rates, conversion efficiency and isoamyl acetate concentration obtained using Novozyme 435 were the highest. Mycelium bound lipase of A. niger NCIM 1207 produced maximal isoamyl acetate formation at an alcohol/acid ratio of 1.6. Acetic acid at higher concentrations than required for the critical alcohol/acid ratio lower than 1.3 and higher than 1.6 resulted in decreased yields of isoamyl acetate probably owing to lowering of micro-aqueous environmental pH around the enzyme leading to inhibition of enzyme activity. Mycelium bound A. niger lipase produced 80 g/l of isoamyl acetate within 96 h even though extremely less amount of enzyme activity was used for esterification. The presence of sodium sulphate during esterification reaction at higher substrate concentration resulted in increased conversion efficiency when we used mycelium bound enzyme preparations of A. niger NCIM 1207. This could be due to removal of excess water released during esterification reaction by sodium sulphate. High ester concentration (286.5 g/l) and conversion (73.5%) were obtained within 24 h using Novozyme 435 under these conditions.     

Immobilization of Candida antarctica lipase B (CALB) on surface-modified rice husk ashes (RHA) via physical adsorption and cross-linking methods

In the present study, the recovery of activity of Candida antarctica lipase B (CALB) immobilized onto surface-modified rice husk ash (RHA) was 90% for both cross-linking and adsorption methods. Both cross-linked and adsorbed immobilized preparations were very stable, retaining more than 48% of their activity over the range of temperatures studied. The optimum temperature and optimum pH values were 37?°C and 7.0, respectively for both immobilized preparations, while the relative activities after storage at 4.0?°C for 60 days were 55% and 65% using cross-linking and adsorption methods, respectively. Also, the activity of the immobilized lipase began to decrease after 10 cycles, more than 58% of the initial activities were still retained after 10 cycles for both immobilization methods. These results indicated that lipase immobilized by cross-linking and adsorption not only effected activity recovery, but also remarkably effected stability, reusability and application adaptability. It can be concluded that, surface-modified RHA can be used as alternative supports for immobilization of CALB for polymerization reactions.     

One‐pot synthesis of (R)‐1‐(pyridin‐4‐yl)ethyl acetate using tandem catalyst prepared by co‐immobilization of palladium and lipase on mesoporous foam: Optimization and kinetic modeling

The synthesis of (R )‐1‐(pyridin‐4‐yl)ethyl acetate was achieved over tandem palladium‐lipase catalyst with 100% selectivity using 4‐acetyl pyridine as a reactant. The 2% w /w palladium and lipase catalyst was successfully co‐immobilized in the microenvironment of the mesocellular foam and characterized by various techniques. The palladium metal from catalyst hydrogenated 4‐acetyl pyridine to form 1‐(pyridin‐4‐yl)ethanol. The generated intermediate product then underwent kinetic resolution over lipase and selectively gave (R )‐1‐(pyridin‐4‐ yl)ethyl acetate. The catalytic conditions were then studied for optimal performance of both steps. The reaction conditions were optimized to 50 °C and toluene as a solvent. Both chemical and enzymatic kinetic models of the reaction were developed for a given set of reaction conditions and kinetic parameters were predicted. At optimal conditions, the obtained selectivity of intermediate (1‐(pyridin‐4‐yl)ethanol) was 51.38%. The final product yield of ((R )‐1‐(pyridin‐4‐yl)ethyl acetate) was 48.62%.     

Enantioselectivity in Developmental Toxicity of rac‐metalaxyl and R‐metalaxyl in Zebrafish (Danio rerio) Embryo

Enantioselectivity of chiral pesticides in environmental safety has attracted more and more attention. In this study, we evaluated the enantioselective toxicity of rac‐metalaxyl and R‐metalaxyl to zebrafish (Danio rerio) embryos through various malformations including pericardial edema, yolk sac edema, crooked body, and short tails. The results showed that there were significant differences in toxicity to zebrafish embryos caused by rac‐metalaxyl and R‐metalaxyl, and the LC₅₀s at 96 h are 416.41 (353.91, 499.29) mg · L^‐1 and 320.650 (279.80, 363.46) mg · L^‐1, respectively. In order to explore the possible mechanism of the development defects, the genes involved in the hypothalamic–pituitary–gonadal axis (vtg1, vtg2, cyp17, cyp19a, cyp19b) and hypothalamic–pituitary–thyroid axis (dio1, dio2, nis, tg, tpo) were quantified by quantitative real‐time polymerase chain reaction (qRT‐PCR). The results revealed that there were no significant differences in the expression of vtg1, vtg2, cyp17, cyp19a, and cyp19b after exposure to rac‐metalaxyl. However, the expression of vtg1, cyp19a, and cyp19b decreased significantly after exposure to R‐metalaxyl. And likewise, rac‐metalaxyl only caused the upregulation of dio2, while R‐metalaxyl suppressed the expression of dio1 and tpo and induced the expression of dio2 and nis. The change of gene expression may cause the enantioselectivity in developmental toxicity in zebrafish embryo. The data provided here will be helpful for us to comprehensively understand the potential ecological risks of the currently used chiral fungicides. Chirality 28:489–494, 2016. © 2016 Wiley Periodicals, Inc.     

Optimization of the coating of octyl-CALB with ionic polymers to improve stability and decrease enzyme leakage

Abstract

Lipase B from Candida antarctica (CALB) immobilized on octyl-agarose (OC) was submitted to coating with polyethylenimine (PEI) and dextran sulfate (DS). Using lowly loaded enzyme preparations, the properties of OC-CALB preparations hardly improved, suggesting too large the distance between enzyme molecules. However, using OC-CALB preparations with maximum loading, CALB stability was greatly improved in different conditions after PEI coating. Moreover, the CALB release from the OC support in the presence of detergents, or during thermal or organic solvent inactivations was greatly reduced after this treatment (PEI plus DS coating). The results pointed that the main positive effect of this coating could be derived from the physical intermolecular crosslinking of the CALB molecules with the polymers that reduce the enzyme desorption from the support. The coating of OC-CALB-PEI with DS only produced a minimal improvement on enzyme performance. Even though the enzyme release was much more difficult after physical crosslinking, all enzyme molecules could be released from the OC support combining an ionic detergent (SDS), high buffer concentration, pH 3 and 45?°C, while using the OC-CALB just 2% SDS at pH 7 and 25?°C was enough to release all enzyme. The support could be reused several cycles. Thus, this strategy permitted to greatly reduce the enzyme desorption during operation and to improve enzyme stability while keeping the enzyme immobilization reversibility.     

Enzymatic synthesis of ethyl esters from waste oil using mixtures of lipases in a plug‐flow packed‐bed continuous reactor

This work describes the continuous synthesis of ethyl esters via enzymatic catalysis on a packed‐bed continuous reactor, using mixtures of immobilized lipases (combi‐lipases) of Candida antarctica (CALB), Thermomyces lanuginosus (TLL), and Rhizomucor miehei (RML). The influence of the addition of glass beads to the reactor bed, evaluation of the use of different solvents, and flow rate on reaction conditions was studied. All experiments were conducted using the best combination of lipases according to the fatty acid composition of the waste oil (combi‐lipase composition: 40% of TLL, 35% of CALB, and 25% of RML) and soybean oil (combi‐lipase composition: 22.5% of TLL, 50% of CALB, and 27.5% of RML). The best general reaction conditions were found to be using tert‐butanol as solvent, and the flow rate of 0.08 mL min^?1. The combi‐lipase reactors operating at steady state for over 30 days (720 h), kept conversion yields of ～50%, with average productivity of 1.94 g_{ethyl esters} h^?1, regardless of the type of oil in use. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:952–959, 2018     

Structure,activity, and stability of metagenome‐derived glycoside hydrolase family 9 endoglucanase with an N‐terminal Ig‐like domain

A metagenome‐derived glycoside hydrolase family 9 enzyme with an N‐terminal immunoglobulin‐like (Ig‐like) domain, leaf‐branch compost (LC)‐CelG, was characterized and its crystal structure was determined. LC‐CelG did not hydrolyze p‐nitrophenyl cellobioside but hydrolyzed CM‐cellulose, indicating that it is endoglucanase. LC‐CelG exhibited the highest activity at 70°C and >80% of the maximal activity at a broad pH range of 5–9. Its denaturation temperature was 81.4°C, indicating that LC‐CelG is a thermostable enzyme. The structure of LC‐CelG resembles those of CelD from Clostridium thermocellum (CtCelD), Cel9A from Alicyclobacillus acidocaldarius (AaCel9A), and cellobiohydrolase CbhA from C. thermocellum (CtCbhA), which show relatively low (29–31%) amino acid sequence identities to LC‐CelG. Three acidic active site residues are conserved as Asp194, Asp197, and Glu558 in LC‐CelG. Ten of the thirteen residues that form the substrate binding pocket of AaCel9A are conserved in LC‐CelG. Removal of the Ig‐like domain reduced the activity and stability of LC‐CelG by 100‐fold and 6.3°C, respectively. Removal of the Gln40‐ and Asp99‐mediated interactions between the Ig‐like and catalytic domains destabilized LC‐CelG by 5.0°C without significantly affecting its activity. These results suggest that the Ig‐like domain contributes to the stabilization of LC‐CelG mainly due to the Gln40‐ and Asp99‐mediated interactions. Because the LC‐CelG derivative lacking the Ig‐like domain accumulated in Escherichia coli cells mostly in an insoluble form and this derivative accumulated in a soluble form exhibited very weak activity, the Ig‐like domain may be required to make the conformation of the active site functional and prevent aggregation of the catalytic domain.     

Cross-linked protein complex exhibiting asymmetric oxidation activities in the absence of added cofactor

A protein complex (PC) suspension exhibits asymmetric biooxidation activities in the absence of any added cofactor such as NAD(P)⁺ or FAD. It can be extracted from pea protein (PP)‐gel (PP encapsulated with Ca²⁺ alginate gel and aerated in air for several hours) using hot water by rotary shaking and powdered by the following three steps: (1) forming precipitates from the suspension using 30% (w/v) aqueous (NH₄)₂SO₄, (2) crosslinking the precipitates with 0.25% (v/v) GA, and (3) preparing the cross‐linked powder by freeze‐drying. The cross‐linked PC (CLPC) performed asymmetric oxidation of the toward (R)‐isomers of rac‐ 1 and rac ‐2 in 50 mM glycine–NaOH (pH 9.0) buffer/DMSO cosolvent [2.07% (v/v)] with high enantioselectivity; thus, the (S)‐isomers can be obtained in greater than 99% ee from the corresponding rac‐p‐substituted naphthyl methyl carbinol (rac‐ 1 and rac ‐2 ). The CLPC activity was not only competitively inhibited by addition of either 1.0 mM ZnCl₂ or a chelating agent such as 1.0 mM EDTA but also denatured by pretreatments: autoclaving at 121°C (20 min) or using 6.0 M guanidine–HCl containing 50 mM DTT. These results indicated that the PC catalytic process may utilize an electron transfer system incorporating a redox cation (e.g., Fe²⁺ ? Fe³⁺ or Zn). Therefore, the newly introduced CLPC can asymmetrically oxidize the substrates without the addition of any cofactor resulting in a low‐cost organic method. Overall, our results show that the CLPC is an easily prepared, low‐cost reagent that can function under mild conditions and afford stereoselectivity, regioselectivity, and substrate specificity. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 953–961, 2012     

Biocatalytic synthesis of vitamin A palmitate using immobilized lipase produced by recombinant Pichia pastoris

In this work, the Candida antarctica lipase B (CALB), produced by recombinant Pichia pastoris , was immobilized and used to synthesize vitamin A palmitate by transesterification of vitamin A acetate and palmitic acid in organic solvent. The reaction conditions including the type of solvent, temperature, rotation speed, particle size, and molar ratio between the two substrates were investigated. It turned out that the macroporous resin HPD826 serving as a carrier showed the highest activity (ca. 9200 U g^?1) among all the screened carriers. It was found that the transesterification kinetic of the immobilized CALB followed the ping pong Bi‐Bi mechanism and the reaction product acetic acid inhibited the enzymatic reaction with an inhibition factor of 2.823 mmol L^?1. The conversion ability of the immobilized CALB was 54.3% after 15 cycles. In conclusion, the present work provides a green route for vitamin A palmitate production using immobilized CALB to catalyze the transesterification of vitamin A acetate and palmitic acid.     

Stereoselective Degradation of alpha‐Cypermethrin and Its Enantiomers in Rat Liver Microsomes

Alpha‐cypermethrin (α‐CP), [(RS)‐a‐cyano‐3‐phenoxy benzyl (1RS)‐cis‐3‐(2, 2‐dichlorovinyl)‐2, 2‐dimethylcyclopropanecarboxylate], comprises a diastereoisomer pair of cypermethrin, which are (+)‐(1R‐cis‐αS)–CP (insecticidal) and (?)‐(1S‐cis‐αR)–CP (inactive). In this experiment, the stereoselective degradation of α‐CP was investigated in rat liver microsomes by high‐performance liquid chromatography (HPLC) with a cellulose‐tris‐ (3, 5‐dimethylphenylcarbamate)‐based chiral stationary phase. The results revealed that the degradation of (?)‐(1S‐cis‐αR)‐CP was much faster than (+)‐(1R‐cis‐αS)‐CP both in enantiomer monomers and rac‐α‐CP. As for the enzyme kinetic parameters, there were some variances between rac‐α‐CP and the enantiomer monomers. In rac‐α‐CP, the V_max and CL_int of (+)‐(1R‐cis‐αS)–CP (5105.22 ± 326.26 nM/min/mg protein and 189.64 mL/min/mg protein) were about one‐half of those of (?)‐(1S‐cis‐αR)–CP (9308.57 ± 772.24 nM/min/mg protein and 352.19 mL/min/mg protein), while the K_m of the two α‐CP enantiomers were similar. However, in the enantiomer monomers of α‐CP, the V_max and K_m of (+)‐(1R‐cis‐αS) ‐CP were 2‐fold and 5‐fold of (?)‐(1S‐cis‐αR)‐CP, respectively, which showed a significant difference with rac‐α‐CP. The CL_int of (+)‐(1R‐cis‐αS)–CP (140.97 mL/min/mg protein) was still about one‐half of (?)‐(1S‐cis‐αR)–CP (325.72 mL/min/mg protein) in enantiomer monomers. The interaction of enantiomers of α‐CP in rat liver microsomes was researched and the results showed that there were different interactions between the IC₅₀ of (?)‐ to (+)‐(1R‐cis‐αS)‐CP and (+)‐ to (?)‐(1S‐cis‐αR)‐CP(IC_50(?)/(+) / IC_50(+)/(?) = 0.61). Chirality 28:58–64, 2016. © 2015 Wiley Periodicals, Inc.     

A lipase‐catalyzed process for green synthesis of temsirolimus

Temsirolimus is an intravenous drug for the treatment of renal cell carcinoma that can be prepared using enol acyl donors, which is not favorable in process development. An improved enzymatic process to prepare temsirolimus has been developed employing lipase‐catalyzed regioselective acylation of rapamycin with environmentally friendly acyl donors. After screening of common commercial lipases and none‐enol acyl donors, it was found that p‐nitrophenyl 2,2,5‐trimethyl‐1,3‐dioxane‐5‐carboxylate reacted as efficient acyl donor when catalyzed by immobilized Thermomyces lanuginose lipase. By optimizing the process conditions (i.e., reaction temperature, solvents, and additives), the reaction time was significantly shortened while the reaction conversion reached 95.4% in methyl tert‐butyl ether after 48 h at 50°C using the new acyl donors. This work demonstrated a cost‐effective, efficient, and scalable process to synthesize temsirolimus.     

Immobilized Candida antarctica lipase B on ZnO nanowires/macroporous silica composites for catalyzing chiral resolution of (R,S)-2-octanol

ZnO nanowires were successfully introduced into a macroporous SiO₂ by in situ hydrothermal growth in 3D pores. The obtained composites were characterized by SEM and XRD, and used as supports to immobilize Candida antarctica lipase B (CALB) through adsorption. The high specific surface area (233 m²/g) and strong electrostatic interaction resulted that the average loading amount of the composite supports (196.8 mg/g) was 3–4 times of that of macroporous SiO₂ and approximate to that of a silica-based mesoporous material. Both adsorption capacity and the activity of the CALB immobilized on the composite supports almost kept unchanged as the samples were soaked in buffer solution for 48 h. The chiral resolution of 2-octanol was catalyzed by immobilized CALB. A maximum molar conversion of 49.1% was achieved with 99% enantiomeric excess of (R)-2-octanol acetate under the optimal condition: a reaction using 1.0 mol/L (R,S)-2-octanol, 2.0 mol/L vinyl acetate and 4.0 wt.% water content at 60 °C for 8 h. After fifteen recycles the immobilized lipase could retain 96.9% of relative activity and 93.8% of relative enantioselectivity.     

Transgenic rice as bioreactor for production of the Candida antarctica lipase B

Candida antarctica lipase B (CALB) is a versatile biocatalyst used for a wide range of biotransformation. Methods for low cost production of this enzyme are highly desirable. Here, we report a mass production method of CALB using transgenic rice seeds as the bioreactor. The transgenic rice transformed with the CALB gene under the control of the promoter of the rice seed storage protein GT1 was found to have accumulated a large quantity of CALB in seeds. The transgenic line with the highest lipolytic activity reached to 85 units per gram of dry seeds. One unit is defined as the amount of lipase necessary to liberate 1 μmol p‐nitrophenol from p‐nitrophenyl butyrate in 1 min. The rice recombinant lipase (rOsCALB) from this line represents 40% of the total soluble proteins in the crude seed extracts. The enzyme purified from the rice seeds had an optimal temperature of 40 °C, and optimal pH of 8.5, similar to that of the fermentation products. Test of its conversion ability as a biocatalyst for biodiesel production suggested that rOsCALB is functionally identical to the fermentation products in its industrial application.     

Waterlogging tolerance in the tribe Triticeae: the adventitious roots of Critesion marinum have a relatively high porosity and a barrier to radial oxygen loss

Nine species from the tribe Triticeae – three crop, three pasture and three ‘wild’ wetland species – were evaluated for tolerance to growth in stagnant deoxygenated nutrient solution and also for traits that enhance longitudinal O₂ movement within the roots. Critesion marinum (syn. Hordeum marinum) was the only species evaluated that had a strong barrier to radial O₂ loss (ROL) in the basal regions of its adventitious roots. Barriers to ROL have previously been documented in roots of several wetland species, although not in any close relatives of dryland crop species. Moreover, the porosity in adventitious roots of C. marinum was relatively high: 14% and 25% in plants grown in aerated and stagnant solutions, respectively. The porosity of C. marinum roots in the aerated solution was 1·8–5·4‐fold greater, and in the stagnant solution 1·2–2·8‐fold greater, than in the eight other species when grown under the same conditions. These traits presumably contributed to C. marinum having a 1·4–3 times greater adventitious root length than the other species when grown in deoxygenated stagnant nutrient solution or in waterlogged soil. The length of the adventitious roots and ROL profiles of C. marinum grown in waterlogged soil were comparable to those of the extremely waterlogging‐tolerant species Echinochloa crus‐galli L. (P. Beauv.). The superior tolerance of C. marinum, as compared to Hordeum vulgare (the closest cultivated relative), was confirmed in pots of soil waterlogged for 21 d; H. vulgare suffered severe reductions in shoot and adventitious root dry mass (81% and 67%, respectively), whereas C. marinum shoot mass was only reduced by 38% and adventitious root mass was not affected.