Geometric arrangements of Tn3 resolvase sites

Site-specific recombination by Tn3 resolvase normally occurs in vitro and in vivo only between directly repeated res sites on the same supercoiled DNA molecule. However, with multiply interlinked catenane substrates consisting of two DNA rings each containing a single res site, resolvase efficiently carried out intermolecular recombination. The topology of the knots produced by several rounds of this reaction proves that the DNA within the synaptic intermediate is coiled in an interwound (plectonemic) fashion rather than wrapped solenoidally around resolvase as in previously characterized supercoiled DNA-protein complexes. The synaptic intermediate can contain equivalently supercoil, catenane, or knot crossings as long as the res sites have a right-handed coiling and a particular relative orientation. The structure of the product knots and catenanes also shows the path the DNA takes during strand exchange. Intermolecular recombination within multiply linked catenanes required negative supercoiling, as does the standard intramolecular reaction.     

Recombination site selection by Tn3 resolvase: topological tests of a tracking mechanism

In vitro recombination by Tn3 resolvase of plasmids containing two directly repeated recombination (res) sites generates two singly interlinked catenated rings. This simple product catenane structure was maintained over a wide range of substrate supercoil densities and in a reaction mixture in which phage lambda Int-mediated recombination generated its characteristic multiply interlinked forms. Using substrates containing four res sites, we found that resolvase recombined neighboring res sites with high preference. This position effect implies that resolvase searches systematically along the DNA for a partner site. Intervening res sites in the opposite orientation did not prevent translocation. We analyzed the geometric arrangement of the interlocked rings after multiple recombination events in a four-site substrate and the pattern of segregation of nonspecific reporter rings catenated to the standard substrate. The results of these novel topological tests imply that the translocating enzyme may not make continuous contact with the DNA.     

Topology of Xer recombination on catenanes produced by lambda integrase.

Xer site-specific recombination at the psi site from plasmid pSC101 displays topological selectivity, such that recombination normally occurs only between directly repeated sites on the same circular DNA molecule. This intramolecular selectivity is important for the biological role of psi, and is imposed by accessory proteins PepA and ArcA acting at accessory DNA sequences adjacent to the core recombination site. Here we show that the selectivity for intramolecular recombination at psi can be bypassed in multiply interlinked catenanes. Xer site-specific recombination occurred relatively efficiently between antiparallel psi sites located on separate rings of right-handed torus catenanes containing six or more nodes. This recombination introduced one additional node into the catenanes. Antiparallel sites on four-noded right-handed catenanes, the normal product of Xer recombination at psi, were not recombined efficiently. Furthermore, parallel psi sites on right-handed torus catenanes were not substrates for Xer recombination. These findings support a model in which psi sites are plectonemically interwrapped, trapping a precise number of supercoils that are converted to four catenation nodes by Xer strand exchange.     

Analysis of inhibitors of the site-specific recombination reaction mediated by Tn3 resolvase

The Tn3-encoded resolvase protein promotes a site-specific recombination reaction between two directly repeated copies of the recombination site res. Several inhibitors that block this event in vitro have been isolated. In this study four of these inhibitors were tested on various steps in the recombination reaction. Two inhibitors. A9387 and A1062, inhibit resolvase binding to the res site. Further, DNase I footprinting revealed that at certain concentrations of A9387 and A1062, resolvase was preferentially bound to site I of res, the site containing the recombinational crossover point. The two other inhibitors, A20812 and A21960, do not affect resolvase binding and bending of the DNA but inhibit synapse formation between resolvase and two directly repeated res sites.     

Inhibitor analysis of synapsis by resolvase

Previously, we isolated several inhibitors that block the site-specific recombination reaction mediated by the Tn3-encoded resolvase protein. One class of inhibitors blocks resolvase binding to the recombination (res) sitc, and a second class inhibits synapse formation between resolvase and two directly repeated res sites. In this report, we identify an inhibitor, A20832, that does not inhibit resolvase binding to res, as measured by filter binding, or synapse formation. Inhibition of resolvase-promoted site-specific recombination by A20832 occurs postsynaptically at strand cleavage. DNase I analysis in the presence of A20832 indicates that only site I of res is bound by resolvase.     

Isolation and characterization of the Tn3 resolvase synaptic intermediate.

We have isolated in quantitative yield the synaptic intermediate formed during site-specific recombination by Tn3 resolvase and characterized it by restriction endonuclease mapping, electron microscopy and topological methods. The intermediate accumulates at low reaction temperatures and is stabilized by crosslinking of the resolvase protomers with glutaraldehyde. The DNA-resolvase complex that maintains the structure of the intermediate (the synaptosome) is approximately 100 A in diameter, forms specifically at resolution (res) sites, and requires two res sites in a supercoiled DNA molecule. Resolvase bound to individual res sites protects approximately -0.5 supercoil per site from relaxation by a topoisomerase, whereas the formation of the synaptosome protects -3 supercoils and condenses the associated DNA to a supercoil density 2.5 times that of the non-complexed substrate. Although recombination requires two directly repeated res sites, both direct and inverted sites form synaptosomes. We conclude that the specificity of recombination is achieved by a three-stage recognition system: binding of resolvase to separate sites, formation of the synaptosome and determination of site orientation from within the complex.     

Recombination by resolvase to analyse DNA communications by the SfiI restriction endonuclease.

The SfiI endonuclease differs from other type II restriction enzymes by cleaving DNA concertedly at two copies of its recognition site, its optimal activity being with two sites on the same DNA molecule. The nature of this communication event between distant DNA sites was analysed on plasmids with recognition sites for SfiI interspersed with recombination sites for resolvase. These were converted by resolvase to catenanes carrying one SfiI site on each ring. The catenanes were cleaved by SfiI almost as readily as a single ring with two sites, in contrast to the slow reactions on DNA rings with one SfiI site. Interactions between SfiI sites on the same DNA therefore cannot follow the DNA contour and, instead, must stem from their physical proximity. In buffer lacking Mg2+, where SfiI is inactive while resolvase is active, the addition of SfiI to a plasmid with target sites for both proteins blocked recombination by resolvase, due to the restriction enzyme bridging its sites and thus isolating the sites for resolvase into separate loops. The extent of DNA looping by SfiI matched its extent of DNA cleavage in the presence of Mg2+.     

Transposon-mediated site-specific recombination in vitro: DNA cleavage and protein-DNA linkage at the recombination site

Resolvase, the product of the tnpR gene of the transposable element gamma delta, mediates a site-specific recombination between two copies of the element directly repeated on the same replicon. The resolution site, res, at which resolvase acts lies in the intercistronic region between the tnpA and tnpR genes. We have studied this site-specific recombination in vitro. In the absence of Mg2+, a resolvase-res complex is formed, which contains DNA molecules that have been cleaved at res. Our data suggest that in this complex resolvase is covalently attached to the 5' ends of the cleaved DNA, leaving free 3' hydroxyl groups. DNA cleavage is stimulated by the interaction of two res sites on the same substrate molecule and appears to be an intermediate step in normal res site recombination. We show that the DNA is cut within a region previously identified as containing the crossover point at the palindromic sequence 5'- (see formula in text) to generate 3' extensions of two bases.     

Mutants of Tn3 resolvase which do not require accessory binding sites for recombination activity

Tn3 resolvase promotes site-specific recombination between two res sites, each of which has three resolvase dimer-binding sites. Catalysis of DNA-strand cleavage and rejoining occurs at binding site I, but binding sites II and III are required for recombination. We used an in vivo screen to detect resolvase mutants that were active on res sites with binding sites II and III deleted (that is, only site I remaining). Mutations of amino acids Asp102 (D102) or Met103 (M103) were sufficient to permit catalysis of recombination between site I and a full res, but not between two copies of site I. A double mutant resolvase, with a D102Y mutation and an additional activating mutation at Glu124 (E124Q), recombined substrates containing only two copies of site I, in vivo and in vitro. In these novel site Ixsite I reactions, product topology is no longer restricted to the normal simple catenane, indicating synapsis by random collision. Furthermore, the mutants have lost the normal specificity for directly repeated sites and supercoiled substrates; that is, they promote recombination between pairs of res sites in linear molecules, or in inverted repeat in a supercoiled molecule, or in separate molecules.     

Solution structure of the Tn3 resolvase-crossover site synaptic complex

Tn3 resolvase is a site-specific DNA recombinase, which catalyzes strand exchange in a synaptic complex containing twelve resolvase subunits and two res sites. Hyperactive mutants of resolvase can form a simpler complex (X synapse) containing a resolvase tetramer and two shorter DNA segments at which strand exchange takes place (site I). We have solved the low-resolution solution structure of the purified, catalytically competent X synapse from small-angle neutron and X-ray scattering data, using methods in which the data are fitted with models constructed by rigid body transformations of a published crystallographic structure of a resolvase dimer bound to site I. Our analysis reveals that the two site I fragments are on the outside of a resolvase tetramer core and provides some information on the quaternary structure of the tetramer. We discuss implications of our structure for the architecture of the natural synaptic complex and the mechanism of strand exchange.     

Activating mutations of Tn3 resolvase marking interfaces important in recombination catalysis and its regulation

Catalysis of DNA recombination by Tn3 resolvase is conditional on prior formation of a synapse, comprising 12 resolvase subunits and two recombination sites (res). Each res binds a resolvase dimer at site I, where strand exchange takes place, and additional dimers at two adjacent 'accessory' binding sites II and III. 'Hyperactive' resolvase mutants, that catalyse strand exchange at site I without accessory sites, were selected in E. coli. Some single mutants can resolve a res x site I plasmid (that is, with one res and one site I), but two or more activating mutations are necessary for efficient resolution of a site I x site I plasmid. Site I x site I resolution by hyperactive mutants can be further stimulated by mutations at the crystallographic 2-3' interface that abolish activity of wild-type resolvase. Activating mutations may allow regulatory mechanisms of the wild-type system to be bypassed, by stabilizing or destabilizing interfaces within and between subunits in the synapse. The positions and characteristics of the mutations support a mechanism for strand exchange by serine recombinases in which the DNA is on the outside of a recombinase tetramer, and the tertiary/quaternary structure of the tetramer is reconfigured.     

Catalytic residues of gamma delta resolvase act in cis.

The resolvase protein of the gamma delta transposon is a site-specific recombinase that acts by a concerted break-and-join mechanism. To analyse the role of individual resolvase subunits in DNA strand cleavage, we have directed the binding of catalytic mutants to specific recombination crossover sites or half-sites. Our results demonstrate that the resolvase subunit bound at the half-site proximal to each scissile phosphodiester bond provides the Ser10 nucleophile and Arg8, Arg68 and Arg71 residues essential for cleavage and covalent attachment to the DNA. Several other residues near the presumptive active site are also shown to act in cis. Double-strand cleavage at one crossover site can proceed independently of cleavage at the other site, although interactions between the resolvase dimers bound at the two crossover sites remain essential. An appropriately oriented heterodimer of active and inactive protomers can in most cases mediate either a 'top' or 'bottom' single-strand cleavage, suggesting that there is no obligatory order of strand cleavages. Top-strand cleavage is associated with the topoisomerase I activity of resolvase, suggesting that a functional asymmetry may be imposed on the crossover site by the structure of the active synapse.     

DNA cleavage reactions by type II restriction enzymes that require two copies of their recognition sites

Several type II restriction endonucleases interact with two copies of their target sequence before they cleave DNA. Three such enzymes, NgoMIV, Cfr10I and NaeI, were tested on plasmids with one or two copies of their recognition sites, and on catenanes containing two interlinked rings of DNA with one site in each ring. The enzymes showed distinct patterns of behaviour. NgoMIV and NaeI cleaved the plasmid with two sites faster than that with one site and the catenanes at an intermediate rate, while Cfr10I gave similar steady-state rates on all three substrates. Both Cfr10I and NgoMIV converted the majority of the substrates with two sites directly to the products cut at both sites, while NaeI cleaved just one site at a time. All three enzymes thus synapse two DNA sites through three-dimensional space before cleaving DNA. With Cfr10I and NgoMIV, both sites are cleaved in one turnover, in a manner consistent with their tetrameric structures, while the cleavage of a single site by NaeI indicates that the second site acts not as a substrate but as an activator, as reported previously. The complexes spanning two sites have longer lifetimes on catenanes with one site in each ring than on circular DNA with two sites, which indicates that the catenanes have more freedom for site juxtaposition than plasmids with sites in cis.     

A model for the gamma delta resolvase synaptic complex

The serine recombinase gamma delta resolvase performs site-specific recombination in an elaborate synaptic complex containing 12 resolvase subunits and two 114-base pair res sites. Here we present an alternative structural model for the synaptic complex. Resolvase subunits in the complex contact their neighbors in equivalent ways, using three principal interactions, one of which is a newly proposed synaptic interaction. Evidence in support of this interaction is provided by mutations at the interface that either enable resolvase to synapse two copies of site I or inhibit synapsis of complete res sites. In our model, the two crossover sites are far apart, separated by the resolvase catalytic domains bound to them. Thus, recombination would require a substantial rearrangement of resolvase subunits or domains.     

DNA communications by Type III restriction endonucleases--confirmation of 1D translocation over 3D looping

DNA cleavage by Type III restriction enzymes is governed strictly by the relative arrangement of recognition sites on a DNA substrate—endonuclease activity is usually only triggered by sequences in head-to-head orientation. Tens to thousands of base pairs can separate these sites. Long distance communication over such distances could occur by either one-dimensional (1D) DNA translocation or 3D DNA looping. To distinguish between these alternatives, we analysed the activity of EcoPI and EcoP15I on DNA catenanes in which the recognition sites were either on the same or separate rings. While substrates with a pair of sites located on the same ring were cleaved efficiently, catenanes with sites on separate rings were not cleaved. These results exclude a simple 3D DNA-looping activity. To characterize the interactions further, EcoPI was incubated with plasmids carrying two recognition sites interspersed with two 21res sites for site-specific recombination by Tn21 resolvase; inhibition of recombination would indicate the formation of stable DNA loops. No inhibition was observed, even under conditions where EcoPI translocation could also occur.     

Recombination by resolvase is inhibited by lac repressor simultaneously binding operators between res sites

The Tn3 resolvase requires that the two recombination (res) sites be aligned as direct repeats on the same molecule for efficient recombination to occur. To test whether resolvase must contact the DNA between res sites as predicted by tracking models, we have determined the sensitivity of recombination to protein diffusion blockades. Recombination between two res sites is unaffected either by lac repressor or bacteriophage T7 RNA polymerase being bound between them. Yet recombination is inhibited by lac repressor if the res site is bounded by a lac operator on both sides. We demonstrate that lac repressor will bind to more than one DNA site under the conditions used to assay recombination. This result suggests that lac repressor can inhibit resolvase by forming a DNA loop that isolates a res site topologically. These results do not support a tracking model for resolvase but suggest that the structure and topology of the DNA substrate is important in the formation of a synapse between res sites.     

Phage P1 Cre-loxP site-specific recombination. Effects of DNA supercoiling on catenation and knotting of recombinant products

Bacteriophage P1 contains a site-specific recombination system consisting of a site, loxP, and a recombinase protein Cre. We have shown that with purified Cre protein we can carry out recombination between two loxP sites in vitro. When that recombination occurs between two sites in direct orientation on the same DNA molecule, we observed the production of free and catenated circular molecules. In this paper we show that recombination between sites in opposite orientation leads to both knotted and unknotted circular products. We also demonstrate that the production of catenanes and knots is influenced by two factors: (1) supercoiling in the DNA substrate, supercoiled DNA substrates yield significantly more catenated and knotted products than nicked circular substrates; and (2) mutations in the loxP site, a class of mutations have been isolated that carry out recombination but result in a distribution of products in which the ratio of catenanes to free circles is increased over that observed with a wild-type site. A more detailed analysis of the products from recombination between wild-type sites indicates: (1) that the catenanes or knots produced by recombination are both simple and complex; (2) that the ratio of free products to catenanes is independent of the distance between the two directly repeated loxP sites; and (3) that for DNA substrates with four loxP sites significant recombination between non-adjacent sites occurs to give free circular products. These observations provide insights into how two loxP sites are brought together during recombination.     

Description of the topological entanglement of DNA catenanes and knots by a powerful method involving strand passage and recombination

We utilize a recently discovered, powerful method to classify the topological state of knots and catenanes. In this method, each such form is associated with a unique polynomial. These polynomials allow a rigorous determination of whether knotted or catenated DNA molecules that appear distinct actually are, and indicate the structure of related molecules. A tabulation is given of the polynomials for all possible stereoisomers of many of the knotted and catenated forms that are found in DNA. The polynomials for a substrate DNA molecule and the products obtained from it by either recombination or strand passage by a topoisomerase are related by a simple theorem. This theorem affords natural applications of the polynomial method to these processes. Examples are presented involving site-specific recombination by the transposon Tn3-encoded resolvase and the phage lambda integrase, in which product structure is predicted as a function of crossover mechanism.     

Site-specific recombinations between direct and inverted res sites of Tn2501

The resolvase gene and the putative res site of Tn2501 are not closely related to any of the previously described resolution functions. In view of this divergence, we designed genetic experiments to confirm the localization of the res site. We analyzed the activity of the Tn2501-encoded resolvase on substrates containing either directly or invertedly repeated res sites. These experiments confirm the localization of the res site that was predicted from nucleotide sequence data and show that the Tn2501 resolvase promotes site-specific inversions in vivo.