An in vitro biofilm model for enamel demineralization and antimicrobial dose-response studies

Microcosm biofilms formed in microplates have demonstrated complex community dynamics similar to natural dental biofilm. No simplified microcosm models to evaluate enamel demineralization and dose-response effect to anticariogenic therapies have yet been established, thus this study was designed to develop a pre-clinical model fulfilling this purpose. Experiments were carried out to establish the time of biofilm formation and the sucrose concentration and exposure regimen. Biofilms were initiated from saliva and grown for up to 10 days on bovine enamel discs in 24-well plates, with a saliva analogue medium. Data were collected as pH readings and thepercentage enamel surface hardness change. A dose-response evaluation was performed with chlorhexidine, which significantly affected the pH and mineral loss. Overall, the established model parameters, 5 days of biofilm growth with intermittent 1% sucrose exposure of 6 h per day, was suitable as a pre-clinical model for enamel demineralization and dose-response studies.     

A novel approach combining the Calgary Biofilm Device and Phenotype MicroArray for the characterization of the chemical sensitivity of bacterial biofilms

A rapid method for screening the metabolic susceptibility of biofilms to toxic compounds was developed by combining the Calgary Biofilm Device (MBEC device) and Phenotype MicroArray (PM) technology. The method was developed using Pseudomonas alcaliphila 34, a Cr(VI)-hyper-resistant bacterium, as the test organism. P. alcaliphila produced a robust biofilm after incubation for 16 h, reaching the maximum value after incubation for 24 h (9.4 × 10⁶ ± 3.3 × 10⁶ CFU peg^?1). In order to detect the metabolic activity of cells in the biofilm, dye E (5×) and menadione sodium bisulphate (100 μM) were selected for redox detection chemistry, because they produced a high colorimetric yield in response to bacterial metabolism (340.4 ± 6.9 Omnilog Arbitrary Units). This combined approach, which avoids the limitations of traditional plate counts, was validated by testing the susceptibility of P. alcaliphila biofilm to 22 toxic compounds. For each compound the concentration level that significantly lowered the metabolic activity of the biofilm was identified. Chemical sensitivity analysis of the planktonic culture was also performed, allowing comparison of the metabolic susceptibility patterns of biofilm and planktonic cultures.     

Continuous flow system for biofilm formation using controlled concentrations of Pseudomonas putida from chicken carcass and coupled to electrochemical impedance detection

Abstract

Most studies dealing with monitoring the dynamics of biofilm formation use microbial suspensions at high concentrations. These conditions do not always represent food or water distribution systems. A continuous flow system capable of controlling the concentration of the microbial suspension stream from 10⁴ to 10⁶ CFU ml^?1 is reported. Pseudomonas putida biofilms formed using 100-fold, 1,000-fold or 10,000-fold diluted bacterial suspensions were monitored in-line by electrochemical impedance spectroscopy (EIS) and total plate counts. Randles equivalent circuit model and a modified Randles model with biofilm elements were used to fit the EIS data. In Randles equivalent circuit, the charge transfer resistance decreased as the biofilm formed. The log colony counts of the biofilm correlated to the charge transfer resistance. In the biofilm model, the biofilm resistance and the double layer capacitance decreased as the biofilm formed. The log colony counts of the biofilm correlated to the biofilm resistance.     

In vitro and ex vivo biofilms of dermatophytes: a new panorama for the study of antifungal drugs

Abstract

This study describes an ex vivo model that creates an environment for dermatophyte biofilm growth, with features that resemble those of in vivo conditions, designing a new panorama for the study of antifungal susceptibility. Regarding planktonic susceptibility, MIC ranges were 0.125-1?µg ml^?1 for griseofulvin and 0.000097-0.25?µg ml^?1 for itraconazole and terbinafine. sMIC50 ranges were 2->512?µg ml^?1 for griseofulvin and 0.25->64?µg ml^?1 for itraconazole and terbinafine. CLSM images demonstrated a reduction in the amount of cells within the biofilm, but hyphae and conidia were still observed and biofilm biomass was maintained. SEM analysis demonstrated a retraction in the biofilm matrix, but fungal structures and water channels were preserved. These results show that ex vivo biofilms are more tolerant to antifungal drugs than in vitro biofilms, suggesting that environmental and nutritional conditions created by this ex vivo model favor biofilm growth and robustness, and hence drug tolerance.     

Flowing biofilms as a transport mechanism for biomass through porous media under laminar and turbulent conditions in a laboratory reactor system

Abstract

Fluid flow has been shown to be important in influencing biofilm morphology and causing biofilms to flow over surfaces in flow cell experiments. However, it is not known whether similar effects may occur in porous media. Generally, it is assumed that the primary transport mechanism for biomass in porous media is through convection, as suspended particulates (cells and flocs) carried by fluid flowing through the interstices. However, the flow of biofilms over the surfaces of soils and sediment particles, may represent an important flux of biomass, and subsequently affect both biological activity and permeability. Mixed species bacterial biofilms were grown in glass flow cells packed with 1 mm diameter glass beads, under laminar or turbulent flow (porous media Reynolds number = 20 and 200 respectively). The morphology and dynamic behavior reflected those of biofilms grown in the open flow cells. The laminar biofilm was relatively uniform and after 23 d had inundated the majority of the pore spaces. Under turbulent flow the biofilm accumulated primarily in protected regions at contact points between the beads and formed streamers that trailed from the leeward face. Both biofilms caused a 2 to 3-fold increase in friction factor and in both cases there were sudden reductions in friction factor followed by rapid recovery, suggesting periodic sloughing and regrowth events. Time-lapse microscopy revealed that under both laminar and turbulent conditions biofilms flowed over the surface of the porous media. In some instances ripple structures formed. The velocity of biofilm flow was on the order of 10 μm h^?1 in the turbulent flow cell and 1.0 μm h^?1 in the laminar flow cell.     

Characterization of polymicrobial biofilms obtained from saliva or carious lesions in dentin

Abstract

This study aimed to compare the formation of polymicrobial biofilms using carious dentin or saliva as inoculum for application in in vitro microbiological studies on caries research. For biofilm growth, combined samples of infected dentin or saliva from three donors were used. The biofilms were grown on glass coverslips, under a regimen of intermittent exposure (6?h day^?1) to 1% sucrose for 4?days. Total bacterial loads, as well as specific aciduric bacteria and mutans streptococci loads were quantified and correlated with biofilm acidogenicity and susceptibility to chlorhexidine. The data were evaluated using the Student’s-t, Mann Whitney and Kruskal-Wallis tests. The two biofilms showed similar microbial loads (total bacteria, aciduric bacteria and mutans streptococci) on day 4, and high acidogenicity after 48?h and were susceptible to chlorhexidine at different time intervals. In conclusion, both dentin and saliva can be used as an inoculum in in vitro studies of processes related to biofilm formation.     

Development of a high throughput and low cost model for the study of semi-dry biofilms

Abstract

The persistence of microorganisms as biofilms on dry surfaces resistant to the usual terminal cleaning methods may pose an additional risk of transmission of infections. In this study, the Centre for Disease Control (CDC) dry biofilm model (DBM) was adapted into a microtiter plate format (Model 1) and replicated to create a novel in vitro model that replicates conditions commonly encountered in the healthcare environment (Model 2). Biofilms of Staphylococcus aureus grown in the two models were comparable to the biofilms of the CDC DBM in terms of recovered log₁₀ CFU well^?1. Assessment of the antimicrobial tolerance of biofilms grown in the two models showed Model 2 a better model for biofilm formation. Confirmation of the biofilms’ phenotype with an extracellular matrix deficient S. aureus suggested stress tolerance through a non-matrix defined mechanism in microorganisms. This study highlights the importance of conditions maintained in bacterial growth as they affect biofilm phenotype and behaviour.     

Antimicrobial mechanism and the effect of atmospheric pressure N2 plasma jet on the regeneration capacity of Staphylococcus aureus biofilm

Abstract

This study systematically assessed the inactivation mechanism on Staphylococcus aureus biofilms by a N₂ atmospheric-pressure plasma jet and the effect on the biofilm regeneration capacity from the bacteria which survived, and their progenies. The total bacterial populations were 7.18?±?0.34 log10 CFU ml^?1 in biofilms and these were effectively inactivated (>5.5-log10 CFU ml^?1) within 30?min of exposure. Meanwhile, >80% of the S. aureus biofilm cells lost their metabolic capacity. In comparison, ～20% of the plasma-treated bacteria entered a viable but non-culturable state. Moreover, the percentage of membrane-intact bacteria declined to ～30%. Scanning electron microscope images demonstrated cell shrinkage and deformation post-treatment. The total amount of intracellular reactive oxygen species was observed to have significantly increased in membrane-intact bacterial cells with increasing plasma dose. Notably, the N₂ plasma treatment could effectively inhibit the biofilm regeneration ability of the bacteria which survived, leading to a long-term phenotypic response and dose-dependent inactivation effect on S. aureus biofilms, in addition to the direct rapid bactericidal effect.     

Sessile Legionella pneumophila is able to grow on surfaces and generate structured monospecies biofilms

Currently, models for studying Legionella pneumophila biofilm formation rely on multi-species biofilms with low reproducibility or on growth in rich medium, where planktonic growth is unavoidable. The present study describes a new medium adapted to the growth of L. pneumophila monospecies biofilms in vitro. A microplate model was used to test several media. After incubation for 6 days in a specific biofilm broth not supporting planktonic growth, biofilms consisted of 5.36 ± 0.40 log (cfu cm^?2) or 5.34 ± 0.33 log (gu cm^?2). The adhered population remained stable for up to 3 weeks after initial inoculation. In situ confocal microscope observations revealed a typical biofilm structure, comprising cell clusters ranging up to ～300 μm in height. This model is adapted to growing monospecies L. pneumophila biofilms that are structurally different from biofilms formed in a rich medium. High reproducibility and the absence of other microbial species make this model useful for studying genes involved in biofilm formation.     

Pyrrolomycins as potential anti-staphylococcal biofilms agents

With the goal of discovering new anti-infective agents active against microbial biofilms, this investigation focused on some natural pyrrolomycins, a family of halogenated pyrrole antibiotics. In this study the anti-staphylococcal biofilm activity of pyrrolomycins C, D, F1, F2a, F2b, F3 and of the synthesized related compounds I, II, III were investigated. The susceptibility of six staphylococcal biofilms was determined by methyltiazotetrazolium staining. Most of the compounds were active at concentrations of 1.5 μg ml^?1 with significant inhibition percentages. A few of the compounds were active at the lowest screening concentration of 0.045 μg ml^?1. The population log reduction of activity against the two best biofilm forming Staphylococcus aureus strains as determined by viable plate counts is also reported. In order to adequately assess the utility of these compounds, their toxicity against human cells was evaluated. It is concluded that pyrrolomycins and synthetic derivatives are promising compounds for developing novel effective chemical countermeasures against staphylococcal biofilms.     

On-demand release of Candida albicans biofilms from urinary catheters by mechanical surface deformation

Abstract

Candida albicans is a leading cause of catheter-associated urinary tract infections and elimination of these biofilm-based infections without antifungal agents would constitute a significant medical advance. A novel urinary catheter prototype that utilizes on-demand surface deformation is effective at eliminating bacterial biofilms and here the broader applicability of this prototype to remove fungal biofilms has been demonstrated. C. albicans biofilms were debonded from prototypes by selectively inflating four additional intralumens surrounding the main lumen of the catheters to provide the necessary surface strain to remove the adhered biofilm. Deformable catheters eliminated significantly more biofilm than the controls (>90% eliminated vs 10% control; p < 0.001). Mechanical testing revealed that fungal biofilms have an elastic modulus of 45 ± 6.7 kPa with a fracture energy of 0.4–2 J m^?2. This study underscores the potential of mechanical disruption as a materials design strategy to combat fungal device-associated infections.     

Use of an in vitro flat-bed biofilm model to measure biologically active anti-odour compounds

The objective of this study was to demonstrate the utility of a modified flat-bed perfusion biofilm matrix system for testing toothpaste formulations directly, without dilution, as a layer in direct contact with the biofilm matrix surface. Final biofilm yields and volatile sulphur compounds (VSC) biogenesis were measured to show the relative efficacy of toothpaste formulations. Diffusion characteristics of the flat-bed system to exposure with Meridol® tooth and tongue gel (TTG; 1,400 ppm F^? from amine fluoride/stannous fluoride, 0.5 % zinc lactate, oral malodour counteractives) was assessed using a bioluminescent target species Escherichia coli Nissle 1917/pGLITE coupled with a low-light photon camera to visualise the kill kinetics. Tongue-flora derived, mixed culture biofilms (n?=?4) received 5, 15 and 30 min treatment with TTG, respectively, to determine the optimum time of exposure. VSC biogenesis was measured from headspace samples by gas chromatography prior to and following treatment of two daily applications for 4 days of treatment (TTG), positive control (CHX gel) and negative controls (placebo and sham treatment). Viable counts were performed at the end of experiments by destructive sampling of the biofilms and plating onto selective and non-selective agar. Following a single treatment with TTG, the E. coli biofilm with lux target gave >50 % reduction of luminescence within 2 to 3 h before recovering to a steady state over 10 h, suggesting biofilm cidal activity rather biostasis. For mixed culture biofilms, 15- and 30-min treatment exposure with TTG gave almost identical reductions in final biofilm yields. For comparing efficacy of treatments, biofilms treated with TTG gave greatest reductions in both pre–post levels of H₂S (P?<?0.01) and CH₃SH (P?<?0.05) and population yields at the end of the experiments (P?<?0.001) compared to placebo and positive control. The in vitro flat-bed perfusion model may be used to replicate many of the activities and reactions believed to be occurring by the tongue biofilm microflora within a real mouth, including VSC biogenesis and its inhibition by exposure to active agents as components of toothpastes and gels applied in direct contact with the biofilm.     

Impact of flow velocity on the dynamic behaviour of biofilm bacteria

Abstract

The impact of flow velocity (FV) on the growth dynamics of biofilms and bulk water heterotrophic plate count (HPC) bacteria in drinking water distribution systems was quantified and modeled by combining a logistic growth model with mass balance equations. The dynamic variations in the specific growth and release rates of biofilm bacteria were also quantified. The experimental results showed that the maximum biofilm biomass did not change when flow velocity was increased from 20 to 40 cm s^?1, but was significantly affected when flow velocity was further increased to 60 cm s^?1. Although the concentration of biofilm bacteria was substantially reduced by the higher shear stress, the concentration of bacteria in the bulk fluid was slightly increased. From this it is estimated that the specific growth rate and specific release rate of biofilm bacteria had doubled. The specific release (detachment) rate was dependent on the specific growth rate of the biofilm bacteria.     

Promethazine improves antibiotic efficacy and disrupts biofilms of Burkholderia pseudomallei

Efflux pumps are important defense mechanisms against antimicrobial drugs and maintenance of Burkholderia pseudomallei biofilms. This study evaluated the effect of the efflux pump inhibitor promethazine on the structure and antimicrobial susceptibility of B. pseudomallei biofilms. Susceptibility of planktonic cells and biofilms to promethazine alone and combined with antimicrobials was assessed by the broth microdilution test and biofilm metabolic activity was determined with resazurin. The effect of promethazine on 48 h-grown biofilms was also evaluated through confocal and electronic microscopy. The minimum inhibitory concentration (MIC) of promethazine was 780 mg l^?1, while the minimum biofilm elimination concentration (MBEC) was 780–3,120 mg l^?1. Promethazine reduced the MIC values for erythromycin, trimethoprim/sulfamethoxazole, gentamicin and ciprofloxacin and reduced the MBEC values for all tested drugs (p<0.05). Microscopic analyses demonstrated that promethazine altered the biofilm structure of B. pseudomallei, even at subinhibitory concentrations, possibly facilitating antibiotic penetration. Promethazine improves antibiotics efficacy against B. pseudomallei biofilms, by disrupting biofilm structure.     

Anoxybacillus and Geobacillus biofilms in the dairy industry: effects of surface material,incubation temperature and milk type

Abstract

Anoxybacillus (A. flavithermus, A. kamchatkensis subsp. asachharedens, A. caldiproteolyticus and A. tepidamans) and Geobacillus (two strains of G. thermodenitrificans, G. thermoglucosidans and G. vulcanii) isolates and reference strains in whole milk were evaluated for their biofilm production on six different abiotic surfaces. G. thermodenitrificans DSM 465^T had the highest cell counts (>4 log₁₀ CFU cm^?2) on glass and stainless steel (SS) at 55 and 65?°C, respectively. G. thermodenitrificans D195 had the highest counts on SS at 55?°C (>5 log₁₀ CFU cm^?2) and polyvinyl chloride (PVC) at 65?°C (>4 log₁₀ CFU cm^?2), indicating the existence of strain variation. The ideal surfaces for all strains were SS and glass at 55?°C, but their preferences were polystyrene and SS at 65?°C. Moreover, Anoxybacillus members were more prone to form biofilms in skim milk than in semi-skim and whole milk, whereas the results were the opposite for Geobacillus. Both the attachment and sporulation of Geobacillus in whole milk was higher than in semi-skim or skim milk. This study proposes that the surface material, temperature and milk type had a cumulative effect on biofilm formation.     

Analysis of the mechanical stability and surface detachment of mature Streptococcus mutans biofilms by applying a range of external shear forces

Well-established biofilms formed by Streptococcus mutans via exopolysaccharide matrix synthesis are firmly attached to tooth surfaces. Enhanced understanding of the physical properties of mature biofilms may lead to improved approaches to detaching or disassembling these highly organized and adhesive structures. Here, the mechanical stability of S. mutans biofilms was investigated by determining their ability to withstand measured applications of shear stress using a custom-built device. The data show that the initial biofilm bulk (~ 50% biomass) was removed after exposure to 0.184 and 0.449 N m^?2 for 67 and 115 h old biofilms. However, removal of the remaining biofilm close to the surface was significantly reduced (vs initial bulk removal) even when shear forces were increased 10-fold. Treatment of biofilms with exopolysaccharide-digesting dextranase substantially compromised their mechanical stability and rigidity, resulting in bulk removal at a shear stress as low as 0.027 N m^?2 and > a two-fold reduction in the storage modulus (G′). The data reveal how incremental increases in shear stress cause distinctive patterns of biofilm detachment, while demonstrating that the exopolysaccharide matrix modulates the resistance of biofilms to mechanical clearance.     

A two-dimensional mass transfer model for an annular bioreactor using immobilized photosynthetic bacteria for hydrogen production

A two-dimensional model for substrate transfer and biodegradation in a novel, annular fiber-illuminating bioreactor (AFIBR) is proposed in which photosynthetic bacteria are immobilized on the surface of a side-glowing optical fiber to form a stable biofilm. When excited by light, the desired intensity and uniform light distribution can be obtained within the biofilm zone in bioreactor and then realize continuous hydrogen production. Substrate transfer and biodegradation within the biofilm zone, as well as substrate diffusion and convection within bulk fluid regions are considered simultaneously in this model. The validity of the model is verified experimentally. Based on the model analysis, influences of flow rate and light intensity on the substrate consumption rate and substrate degradation efficiency were investigated. The simulation results show that the optimum operational conditions for the substrate degradation within the AFIBR are: flow rate 100 ml h^?1 and light intensity 14.6 μmol photons m^?2 s^?1.     

Biofilm formation by the yeast Rhodotorula mucilaginosa: process,repeatability and cell attachment in a continuous biofilm reactor

Yeast biofilms contribute to quality impairment of industrial processes and also play an important role in clinical infections. Little is known about biofilm formation and their treatment. The aim of this study was to establish a multi-layer yeast biofilm model using a modified 3.7 l bench-top bioreactor operated in continuous mode (D = 0.12 h^?1). The repeatability of biofilm formation was tested by comparing five bioprocesses with Rhodotorula mucilaginosa, a strain isolated from washing machines. The amount of biofilm formed after 6 days post inoculation was 83 μg cm^?2 protein, 197 μg cm^?2 polysaccharide and 6.9 × 10⁶ CFU cm^?2 on smooth polypropylene surfaces. Roughening the surface doubled the amount of biofilm but also increased its spatial variability. Plasma modification of polypropylene significantly reduced the hydrophobicity but did not enhance cell attachment. The biofilm formed on polypropylene coupons could be used for sanitation studies.     

Thermal mitigation of Pseudomonas aeruginosa biofilms

Bacterial biofilms infect 2–4% of medical devices upon implantation, resulting in multiple surgeries and increased recovery time due to the very great increase in antibiotic resistance in the biofilm phenotype. This work investigates the feasibility of thermal mitigation of biofilms at physiologically accessible temperatures. Pseudomonas aeruginosa biofilms were cultured to high bacterial density (1.7?×?10⁹ CFU cm^?2) and subjected to thermal shocks ranging from 50°C to 80°C for durations of 1–30 min. The decrease in viable bacteria was closely correlated with an Arrhenius temperature dependence and Weibull-style time dependence, demonstrating up to six orders of magnitude reduction in bacterial load. The bacterial load for films with more conventional initial bacterial densities dropped below quantifiable levels, indicating thermal mitigation as a viable approach to biofilm control.     

Inhibitory effects of single-walled carbon nanotubes on biofilm formation from Bacillus anthracis spores

This study reports the inhibitory effect of single walled carbon nanotubes (SWCNTs) on biofilm formation from Bacillus anthracis spores. Although the presence of 50 to 100 μg ml^?1 of SWCNTs in the suspension increased spore attachment in the wells of 96-well plates, the presence of 200 μg ml^?1 of SWCNTs in the germination solution decreased the germination percentage of the attached spores by 93.14%, completely inhibiting subsequent biofilm formation. The inhibition kinetics of 50 μg ml^?1 SWCNTs on biofilm formation showed that this concentration inhibited biofilm formation by 81.2% after incubation for 48 h. SWCNT treatment in the earlier stages of biofilm formation was more effective compared to treatment at later stages. Mature biofilms were highly resistant to SWCNT treatment.