Extracellular synthesis of gold bionanoparticles by <Emphasis Type="Italic">Nocardiopsis</Emphasis> sp. and evaluation of its antimicrobial,antioxidant and cytotoxic activities

Advancement of biological process for the synthesis of bionanoparticles is evolving into a key area of research in nanotechnology. The present study deals with the biosynthesis, characterization of gold bionanoparticles by Nocardiopsis sp. MBRC-48 and evaluation of their antimicrobial, antioxidant and cytotoxic activities. The gold bionanoparticles obtained were characterized by UV–visible spectroscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray analysis and transmission electron microscopy (TEM). The synthesized gold bionanoparticles were spherical in shape with an average of 11.57 ± 1.24 nm as determined by TEM and dynamic light scattering (DLS) particle size analyzer, respectively. The biosynthesized gold nanoparticles exhibited good antimicrobial activity against pathogenic microorganisms. It showed strong antioxidant activity as well as cytotoxicity against HeLa cervical cancer cell line. The present study demonstrated the potential use of the marine actinobacterial strain of Nocardiopsis sp. MBRC-48 as an important source for gold nanoparticles with improved biomedical applications including antimicrobial, antioxidant as well as cytotoxic agent.     

Environmentally benign rapid biosynthesis of extracellular gold nanoparticles using Aspergillus flavus and their cytotoxic and catalytic activities

In this study, the rapid biosynthesis of gold nanoparticles (AuNPs) by Aspergillus flavus culture supernatant was achieved by reducing 1 mM of chloroauric acid (HAuCl₄) within 2 min at pH 7 and 30 °C. The biosynthesized nanoparticles exhibited maximum absorbance at 545 nm in UVvis spectroscopy. Transmission electron microscopy exhibited that AuNPs tend to take nearly spherical shapes with an average size of 12 nm. Fourier transform infrared analysis indicated that carboxyl, amine, and hydroxyl groups may participate in the biosynthesis and stabilization of AuNPs. Its zeta potential was found to be -33.01 mV. Energy dispersive X-rays showed a strong and typical beak of gold nanocrystallites with 80.84 % of analyzed sample. X-Ray diffraction spectrum displayed Bragg reflections identical to the gold nanocrystals. The results confirmed that biosynthesized AuNPs are a potent anticancer agent against A549, HepG2 and MCF7 cell lines with IC₅₀ value 53.5, 60.7 and 100 μg/mL, respectively. Crystal violet assay confirmed the cytopathic effects of AuNPs on HepG2 and A549 cell lines. Annexin-V FITC assay and cell cycle confirmed the apoptotic effect and cell cycle arrest in G2/M phase, respectively for A549 cell line. Moreover, the results showed a degradation efficiency of AuNPs to 4-nitrophenol within 16 min.     

Tuning the Plasmon of Metallic Nanostructures: From Silver Nanocubes Toward Gold Nanoboxes

One of the most significant advances in nanoscience and nanotechnology was partially driven by plasmonic effect of some noble metal nanostructures with different shapes and sizes. By controlling the geometry of metal nanostructures, their surface plasmon resonance (SPR) peaks could be tuned from the visible to the near-infrared region with various applications in sensors, optoelectronic, nanomedicine, and specifically cancer therapy. In this study, we have prepared gold nanoboxes (NBs) using the galvanic replacement between Ag nanocubes (NCs) and aqueous gold solution. Ultraviolet visible (UVvis) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmitting electron microscopy (TEM) were used to characterize silver NCs and gold NBs. The primary silver NCs were synthesized by conventional polyol method at the presence of sodium sulfide to highly tune the shape and size of the NCs. Optimized cubic silver nanostructures were obtained at 90 μl of sodium sulfide injection into the solution. Moreover, the effect of quality of the cubic structure on the shape and uniformity of gold NBs was investigated. Gold NBs with hollow interior structure and SPR peak ranging from 480 to 800 nm were successfully obtained at different injection volumes of HAuCl₄ into the solution. It was demonstrated that increasing the volume of HAuCl₄ solution to about 3 mL can increase the pore number and size until the primary structure collapses into small pieces. It was also found that the concentration of gold NBs and the corresponding SPR peak intensities decrease due to pore size enhancement and decline of charge density on the surface of metal hollow nanostructures.     

Biogenic synthesis of floral-shaped gold nanoparticles using a novel strain,Talaromyces flavus

A biogenic route was adopted towards the synthesis of gold nanoparticles using the extract of a novel strain, Talaromyces flavus. Reduction of chloroauric acid by the fungal extract resulted in the production of gold nanoparticle, which was further confirmed by the concordant results obtained from UV–visible spectroscopy, energy dispersive spectroscopy (EDS), and dynamic light scattering (DLS) analysis. Morphology and the crystal nature of the synthesized nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD) and selected area electron diffraction (SAED). A direct correlation was observed between nanoparticle formation and the concentration of reducing agent present in the fungal extract. The time-dependent kinetic study revealed that the bioreduction process follows an autocatalytic reaction. Crystalline, irregular, and mostly flower-shaped gold nanoparticles with a mean hydrodynamic radius of 38.54?±?10.34 nm were obtained. pH played a significant role on production of mono-dispersed nanoparticle. FTIR analysis partially deciphered the involvement of –NH₂, ?SH, and –CO groups as the probable molecules in the bio-reduction and stabilization process. Compared to the conventional methods, a time-resolved, green, and economically viable method for floral-shaped nanoparticle synthesis was developed.     

Biosynthesis of fluorescent gold nanoparticles using an edible freshwater red alga,Lemanea fluviatilis (L.) C.Ag. and antioxidant activity of biomatrix loaded nanoparticles

Biosynthesis of gold nanoparticles has been accomplished via reduction of an aqueous chloroauric acid solution with the dried biomass of an edible freshwater epilithic red alga, Lemanea fluviatilis (L.) C.Ag., as both reductant and stabilizer. The synthesized nanoparticles were characterized by UV–visible, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), and dynamic light scattering (DLS) studies. The UV–visible spectrum of the synthesized gold nanoparticles showed the surface plasmon resonance (SPR) at around 530 nm. The powder XRD pattern furnished evidence for the formation of face-centered cubic structure of gold having average crystallite size 5.9 nm. The TEM images showed the nanoparticles to be polydispersed, nearly spherical in shape and have sizes in the range 5–15 nm. The photoluminescence spectrum of the gold nanoparticles excited at 300 nm showed blue emission at around 440 nm. Gold nanoparticles loaded within the biomatrix studied using a modified 2,2-diphenyl-1-picrylhydrazyl (DPPH) method exhibited pronounced antioxidant activity.     

Green synthesis of silver and gold nanoparticles using Zingiber officinale root extract and antibacterial activity of silver nanoparticles against food pathogens

In the present study, we synthesized silver and gold nanoparticles with a particle size of 10–20 nm, using Zingiber officinale root extract as a reducing and capping agent. Chloroauric acid (HAuCl₄) and silver nitrate (AgNO₃) were mixed with Z. officinale root extract for the production of silver (AgNPs) and gold nanoparticles (AuNPs). The surface plasmon absorbance spectra of AgNPs and AuNPs were observed at 436–531 nm, respectively. Optimum nanoparticle production was achieved at pH 8 and 9, 1 mM metal ion, a reaction temperature 50 °C and reaction time of 150–180 min for AgNPs and AuNPs, respectively. An energy-dispersive X-ray spectroscopy (SEM–EDS) study provides proof for the purity of AgNPs and AuNPs. Transmission electron microscopy images show the diameter of well-dispersed AgNPs (10–20 nm) and AuNPs (5–20 nm). The nanocrystalline phase of Ag and Au with FCC crystal structures have been confirmed by X-ray diffraction analysis. Fourier transform infrared spectroscopy analysis shows the respective peaks for the potential biomolecules in the ginger rhizome extract, which are responsible for the reduction in metal ions and synthesized AgNPs and AuNPs. In addition, the synthesized AgNPs showed a moderate antibacterial activity against bacterial food pathogens.     

Efficacy of Acinetobacter sp. B9 for simultaneous removal of phenol and hexavalent chromium from co-contaminated system

The present study shows the feasibility of a newly isolated strain Acinetobacter sp. B9 for concurrent removal of phenol and Cr (VI) from wastewater. The experiments were conducted in a batch reactor under aerobic conditions. Initially, when mineral salt solution was used as the culture medium, the strain was found to utilize phenol as sole carbon and energy source while no Cr (VI) removal was observed. However, the addition of glucose as co-carbon source resulted in the removal of both toxicants. This co-removal efficiency of the strain was further improved with nutrient-rich media (NB). Optimum co-removal was determined at 188 mg L^?1 of phenol and 3.5 mg L^?1 of Cr (VI) concentrations at pH 7.0. Strain B9 followed the orthometabolic pathway for phenol degradation. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR) studies showed sorption of chromium as one of the major mechanisms for Cr (VI) removal by B9 cells. Acinetobacter sp. B9 was later on checked for bioremediation of real tannery wastewater. After 96 h of batch treatment of tannery effluent containing an initial 47 mg L^?1 phenol and 16 mg L^?1 Cr (VI), complete removal of phenol and 87 % reduction of Cr (VI) were attained, showing high efficiency of the bacterial strain for potential application in industrial pollution control.     

Mycogenesis of gold nanoparticles using a phytopathogen <Emphasis Type="Italic">Alternaria alternata</Emphasis>

The development of an eco-friendly and reliable process for the synthesis of gold nanomaterials (AuNPs) using microorganisms is gaining importance in the field of nanotechnology. In the present study, AuNPs have been synthesized by bio-reduction of chloroauric acid (HAuCl₄) using the fungal culture filtrate (FCF) of Alternaria alternata. The synthesis of the AuNPs was monitored by UV–visible spectroscopy. The particles thereby obtained were characterized by UV, dynamic light scattering (DLS), X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis, Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM) and transmission electron microscopy (TEM). Energy-dispersive X-ray study revealed the presence of gold in the nanoparticles. Fourier transform infrared spectroscopy confirmed the presence of a protein shell outside the nanoparticles which in turn also support their stabilization. Treatment of the fungal culture filtrate with aqueous Au⁺ ions produced AuNPs with an average particle size of 12 ± 5 nm. This proposed mechanistic principal might serve as a set of design rule for the synthesis of nanostructures with desired architecture and can be amenable for the large scale commercial production and technical applications.     

Biosynthesis of gold nanoparticles by Azospirillum brasilense

Plant-associated nitrogen-fixing soil bacteria Azospirillum brasilense were shown to reduce the gold of chloroauric acid to elemental gold, resulting in formation of gold nanoparticles. Extracellular phenoloxidizing enzymes (laccases and Mn peroxidases) were shown to participate in reduction of Au⁺³ (HAuCl₄) to Au⁰. Transmission electron microscopy revealed accumulation of colloidal gold nanoparticles of diverse shape in the culture liquid of A. brasilense strains Sp245 and Sp7. The size of the electron-dense nanospheres was 5 to 50 nm, and the size of nanoprisms varied from 5 to 300 nm. The tentative mechanism responsible for formation of gold nanoparticles is discussed.     

Mycocrystallization of gold ions by the fungus Cylindrocladium floridanum

The size and morphology determines the thermodynamic, physical and electronic properties of metal nanoparticles. The extracellular synthesis of gold nanoparticles by fungus, Cylindrocladium floridanum, which acts as a source of reducing and stabilizing agent has been described. The synthesized nanoparticles were characterized using techniques such as UV–Vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy, energy dispersive X-ray analysis (EDAX), and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical with an average size of 19.05 nm. Powder XRD pattern proved the formation of (111)-oriented face-centered cubic crystals of metallic gold. This microbial approach by fungus for the green synthesis of spherical gold nanoparticles has many advantages such as economic viability, scaling up and environment friendliness.     

Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts

Leaf extracts of two plants, Magnolia kobus and Diopyros kaki, were used for ecofriendly extracellular synthesis of metallic gold nanoparticles. Stable gold nanoparticles were formed by treating an aqueous HAuCl₄ solution using the plant leaf extracts as reducing agents. UV–visible spectroscopy was used for quantification of gold nanoparticle synthesis. Only a few minutes were required for >90% conversion to gold nanoparticles at a reaction temperature of 95 °C, suggesting reaction rates higher or comparable to those of nanoparticle synthesis by chemical methods. The synthesized gold nanoparticles were characterized with inductively coupled plasma spectrometry (ICP), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and particle analysis using a particle analyzer. SEM and TEM images showed that a mixture of plate (triangles, pentagons, and hexagons) and spherical structures (size, 5–300 nm) were formed at lower temperatures and leaf broth concentrations, while smaller spherical shapes were obtained at higher temperatures and leaf broth concentrations.     

Exploitation of marine bacteria for production of gold nanoparticles

Background

Gold nanoparticles (AuNPs) have found wide range of applications in electronics, biomedical engineering, and chemistry owing to their exceptional opto-electrical properties. Biological synthesis of gold nanoparticles by using plant extracts and microbes have received profound interest in recent times owing to their potential to produce nanoparticles with varied shape, size and morphology. Marine microorganisms are unique to tolerate high salt concentration and can evade toxicity of different metal ions. However, these marine microbes are not sufficiently explored for their capability of metal nanoparticle synthesis. Although, marine water is one of the richest sources of gold in the nature, however, there is no significant publication regarding utilization of marine micro-organisms to produce gold nanoparticles. Therefore, there might be a possibility of exploring marine bacteria as nanofactories for AuNP biosynthesis.

Results

In the present study, marine bacteria are exploited towards their capability of gold nanoparticles (AuNPs) production. Stable, monodisperse AuNP formation with around 10?nm dimension occur upon exposure of HAuCl₄ solution to whole cells of a novel strain of Marinobacter pelagius, as characterized by polyphasic taxonomy. Nanoparticles synthesized are characterized by Transmission electron microscopy, Dynamic light scattering and UV-visible spectroscopy.

Conclusion

The potential of marine organisms in biosynthesis of AuNPs are still relatively unexplored. Although, there are few reports of gold nanoparticles production using marine sponges and sea weeds however, there is no report on the production of gold nanoparticles using marine bacteria. The present work highlighted the possibility of using the marine bacterial strain of Marinobacter pelagius to achieve a fast rate of nanoparticles synthesis which may be of high interest for future process development of AuNPs. This is the first report of AuNP synthesis by marine bacteria.     

Biosynthesis of Stable Polyshaped Gold Nanoparticles from Microwave-Exposed Aqueous Extracellular Anti-malignant Guava (Psidium guajava) Leaf Extract

Addition of microwave-exposed aqueous extracellular anti-malignant guava (Psidium guajava) leaf extract to the aqueous gold chloride solution yielded stable polyshaped gold nanoparticles of high composition. Microwave-assisted route selected for the preparation of aqueous guava leaf extract was to suppress the enzymatic action. The formation of nanoparticles was understood from the UV–visible and X-ray diffraction studies. The size and shape analysis was done using field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Zeta potential experiment shows that the bio-functionalized gold nanoparticles colloidal solution obtained as above will maintain its stability even after 30 weeks of storage. It is observed that the flavonoids which are separated during microwave heating of extracellular solution of the guava leaves are responsible for the biosynthesis of gold nanoparticles.     

Synthesis and characterizations of iso‐luminol‐functionalized,tadpole‐shaped,gold nanomaterials

Iso‐luminol functionalized gold nanomaterials were synthesized in high yield by a simple seeding approach, using the chemiluminescent reagent iso‐luminol as reductant in the presence of HAuCl₄, AgNO₃ and cetyltrimethylammonium bromide (CTAB). The morphology of as‐prepared gold nanoparticles was characterized by transmission electron microscopy and UV–vis spectroscopy, showing that gold nanotadpoles (AuNTps) were obtained. Subsequent experiments revealed that the amounts of seed colloids and AgNO₃ and the concentrations of iso‐luminol and CTAB in the growth solution play critical roles in the formation of well‐shaped AuNTps. The surface state of AuNTps was characterized by UV–vis spectroscopy and fluorescence spectroscopy, indicating that iso‐luminol and its oxidation product, 4‐aminophthalate, coexisted on the surface of AuNTps. The CL behaviour was studied by static injection CL experiments, demonstrating that AuNTps were of CL activity. Finally, the growth mechanism of AuNTps was also discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Antibacterial activity of silver nanoparticle-coated fabric and leather against odor and skin infection causing bacteria

We present a simple, eco-friendly synthesis of silver and gold nanoparticles using a natural polymer pine gum solution as the reducing and capping agent. The pine gum solution was combined with silver nitrate (AgNO₃) or a chloroauric acid (HAuCl₄) solution to produce silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), respectively. The reaction process was simple; formation of the nanoparticles was achieved by autoclaving the silver and gold ions with the pine gum. UV–Vis spectra showed surface plasmon resonance (SPR) for silver and gold nanoparticles at 432 and 539 nm, respectively. The elemental forms of AgNPs and AuNPs were confirmed by energy-dispersive X-ray spectroscopy (EDX). Fourier transform infrared spectroscopy (FTIR) showed the biomolecules present in the pine gum, AgNPs, and AuNPs. Transmission electron microscopy (TEM) images showed the shape and size of AgNPs and AuNPs. The crystalline nature of synthesized AgNPs and AuNPs was confirmed by X-ray crystallography [X-ray diffraction (XRD)]. Application of synthesized AgNPs onto cotton fabrics and leather, in order to evaluate their antibacterial properties against odor- or skin infection-causing bacteria, is also discussed. Among the four tested bacteria, AgNP-coated cotton fabric and leather samples displayed excellent antibacterial activity against Brevibacterium linens.     

Morphological alterations in erythrocytes treated with silver nanoparticles biomineralized by marine sediment-derived Bacillus sp. VITSSN01

Biomineralization-inspired preparation of nanoparticles by marine microorganisms is in the limelight of modern nanotechnology. In recent years, the use of marine microorganisms for the synthesis of nanoparticles has been gaining importance due to the simplicity and eco-friendliness of the approach. Here we describe the synthesis of silver nanoparticles using halotolerant Bacillus sp. isolated from the southern coastal waters of India. Our selective and enriched isolation technique resulted in the isolation of a silver nitrate-resistant novel marine Bacillus sp. isolated from sediments collected at Ennore Port, Chennai, India. The strain was characterized by the polyphasic taxonomic approach, and phenotypic and phylogenetic analysis identified the strain as Bacillus sp. VITSSN01. The resistant strain was further assayed for the synthesis of silver nanoparticles and its biological activity evaluated. Nanoparticles were synthesized under optimized nutritional and cultural conditions with shaking and the production continuously monitored. The nanoparticles thus produced were then characterized by atomic force microscopy, X-ray diffraction, Fourier transform-infrared spectrophotometer and transmission electron microscopy. The mean particle size was 46 nm. Hemotological toxicity of nanoparticles is very severe form and less studied. We therefore checked the synthesized silver nanoparticles for toxicity against erythrocytes and found that the silver nanoparticles exhibited moderate hemolytic activity against human erythrocytes, with a half maximal effective concentration (EC₅₀) value of 60 μg/ml. Microscopic studies of the treated erythrocytes showed slight structural perturbations. The results of our study strongly suggest that marine microorganisms could be a potential source for the rapid and eco-friendly synthesis of nanoparticles.     

Green biochemistry approach for synthesis of silver and gold nanoparticles using <Emphasis Type="Italic">Ficus racemosa</Emphasis> latex and their pH-dependent binding study with different amino acids using UV/Vis absorption spectroscopy

Simple and eco-friendly biosynthesis approach was developed to synthesize silver nanoparticles (SNPs) and gold nanoparticles (GNPs) using Ficus racemosa latex as reducing agent. The presence of sunlight is utilized with latex and achieved the nanoparticles whose average size was in the range of 50–120 nm for SNPs and 20–50 nm for GNPs. The synthesized nanoparticles were characterized by UV/Visible absorption spectroscopy, X-ray diffraction, and field emission—scanning electron microscopy techniques toget understand the obtained nanoparticles. The pH-dependent binding studies of SNPs and GNPs with four amino acids, namely l-lysine, l-arginine, l-glutamine and glycin have been reported.     

Mercury bioaccumulation and simultaneous nanoparticle synthesis by Enterobacter sp. cells

A mercury resistant strain of Enterobacter sp. is reported. The strain exhibited a novel property of mercury bioaccumulation with simultaneous synthesis of mercury nanoparticles. The culture conditions viz. pH 8.0 and lower concentration of mercury promotes synthesis of uniform sized 2-5 nm, spherical and monodispersed intracellular mercury nanoparticles. The remediated mercury trapped in the form of nanoparticles is unable to vaporize back into the environment thus, overcoming the major drawback of mercury remediation process. The mercury nanoparticles were recoverable. The nanoparticles have been characterized by high resolution transmission electron microscopy, energy dispersive X-ray analysis, powder X-ray diffraction and atomic force microscopy. The strain can be exploited for metal bioaccumulation from environmental effluent and developing a green process for nanoparticles biosynthesis.     

Precipitation of calcite induced by Synechocystis sp. PCC6803

Calcite with laminate structure was successfully prepared by culturing Synechocystis sp. PCC6803 with different concentrations of calcium chloride (CaCl₂) in BG11 media. S. PCC6803 was examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), laser confocal scanning microscope (LCSM) and energy dispersive spectroscopy (EDS). The effects of Ca²⁺ concentrations and pH values on calcification were investigated and the micro morphs of the CaCO₃ crystals were observed by means of SEM. These results showed that CaCO₃ crystals could be more easily formed with increasing the concentration of CaCl₂ in S. PCC6803 culture solution. S. PCC6803 could largely bind calcium ions, most of which were present in extracellular polymeric substances and on the cell wall. Inside the cells there were a lot of circular areas rich in calcium ions without the crystallization of calcium. Some cells produced a thicker gelatinous sheath outside of the translucent organic thin layer. And the cells inside also produced major changes that the original chloroplasts were almost transformed into starch grains whose sizes were from 0.5 to 1 μm with relatively uniform in sizes. At the same time the cell sizes significantly reduced to only about 8–9 μm almost changing to half of its original diameters. The calcite crystals with a highly preferred orientation induced by S. PCC6803 were observed with X-ray diffraction (XRD). A critical implication was that S. PCC6803 could induce bio-calcification and then mediate the further growth of CaCO₃ crystals in the biological system.     

Synthesis and characterization of silver nanoparticles using Cynodon dactylon leaves and assessment of their antibacterial activity

Many methods of synthesizing silver nanoparticles (Ag-NPs) by reducing Ag⁺ ions using aqueous/organic extracts of various plants have been reported in the past, but the methods are rather slow. In this investigation, silver nanoparticles were quickly synthesized from aqueous silver nitrate through a simple method using leaf extract of a plant—Cynodon dactylon which served as reducing agent, while sunlight acted as a catalyst. The formation of Ag-NPs was indicated by gradual change in colour and pH and confirmed by ultraviolet–visible spectroscopy. The Ag-NPs showed a surface plasmon resonance at 451 nm. Based on the decrease in pH, a possible mechanism of the synthesis of Ag-NPs involving hydroxyl (OH^?) ions of polyphenols of the leaf extract is postulated. Ag-NPs having (111) and (200) crystal lattices were confirmed by X-ray diffraction. Scanning electron microscopy revealed the spherical nature of the Ag-NPs, while transmission electron microscopy showed that the nanoparticles were polydispersed with a size range of 8–10 nm. The synthesized Ag-NPs also demonstrated their antibacterial activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella typhimurium.