Formulation development and in vitro and in vivo evaluation of membrane-moderated transdermal systems of ampicillin sodium in ethanol: pH 4.7 buffer solvent system

The objective of the present study was to develop membrane-moderated transdermal systems of ampicillin sodium and to evaluate them with respect to various in vitro and in vivo parameters. The membrane-type transdermal systems were prepared using a drug with various antinucleant polymers— hydroxypropyl methylcellulose (HPMC), methylcellulose (MC), cellulose acetate phthalate, chitosan, sodium alginate (SA), and sodium carboxymethylcellulose—in an ethanol: pH 4.7 buffer volatile system by the solvent evaporation technique with HPMC as the rate-controlling membrane for all the systems. The swelling properties of the polymers were studied, and drug-polymer interaction studies were performed. The patches were subjected to various physicochemical studies, in vitro release studies, permeation studies, and skin irritation studies. The best patch among the formulations was selected for further in vivo studies. Compared to the other patches, SA exhibited the highest moisture content at 16%; a 21% moisture uptake was found with MC. The release and permeation of the drug from the SA patch was found to be the maximum. The in vivo study of the SA patch exhibited a peak plasma concentration C_max of 126 μg/mL at T_max 4 hours. Hence, it can be concluded that hydrophilic ampicillin sodium can be developed as a transdermal delivery system with SA that is an alternative to intravenous administration and has minimal adverse effects. Published: January 26, 2007     

Transdermal therapeutic system of carvedilol: Effect of hydrophilic and hydrophobic matrix on in vitro and in vivo characteristics

The purpose of this research was to develop a matrix-type transdermal therapeutic system containing carvedilol with different ratios of hydrophilic and hydrophobic polymeric combinations by the solvent evaporation technique. The physicochemical compatibility of the drug and the polymers was studied by infrared spectroscopy and differential scanning calorimetry. The results suggested no physicochemical incompatibility between the drug and the polymers. In vitro permeation studies were performed by using Franz diffusion cells. The results followed Higuchi kinetics (r=0.9953−0.9979), and the mechanism of release was diffusion mediated. Based on physicochemical and in vitro skin permeation studies, patches coded as F3 (ethyl cellulose: polyvinylpyr-rolidone, 7.5∶2.5) and F6 (Eudragit RL:Eudragit RS, 8∶2) were chosen for further in vivo studies. The bioavailability studies in rats indicated that the carvedilol transdermal patches provided steady-state plasma concentrations with minimal fluctuations and improved bioavailability of 71% (for F3) and 62% (for F6) in comparison with oral administration. The antihypertensive activity of the patches in comparison with that of oral carvedilol was studied using methyl prednisolone acetate—induced hypertensive rats. It was observed that both the patches significantly controlled hypertension from the first hour (P<.05). The developed transdermal patches increase the efficacy of carvedilol for the therapy of hypertension. Published; January 19, 2007     

Sustained Anti-inflammatory Effect of Resveratrol-Phospholipid Complex Embedded Polymeric Patch

Resveratrol-phospholipid complex (Phytosome®) (RSVP) was found better aqueous soluble and permeable than free resveratrol (RSV). RSVPs were incorporated in polymeric patch prepared by solvent casting method using Eudragit RL 100, PVP K30, and PEG 400 for application on dermal sites for sustained treating of inflammation. Prepared patches were evaluated for various physicochemical properties, surface morphology by SEM, TEM, and compatibility of patch components by FT-IR and DSC studies. Optimized formulation (F9) gave 95.79?±?3.02% drug release and 51.36% (4.28?±?0.48 mg/cm²) skin permeation after 24 h. Skin extract when examined for drug accumulation showed 38.31?±?2.42% drug content. FE-SEM images of the patch taken after drug release and skin permeation studies showed that RSVPs in polymeric patch are stable and retain their structure after 24 h long exposure to physiologic environment. Sustained anti-inflammatory effect was established in carrageenan-induced paw edema model in which test formulation gave 84.10% inhibition of inflammation at 24 h as compared to 39.58% for standard diclofenac sodium gel. The CLSM study confirmed the localization of RSVPs for a longer period, thus enabling drug targeting to the dermis for sustained effect. Skin irritation test on rabbit revealed that the patches are safe for skin application. Histological observations suggested that after exposure to the permeants, the SC integrity had not altered and no evidence of presence of inflammatory cells found. RSVP (Phytosome®) containing patches abled to give sustained therapeutic effect that may be useful in treating acute and chronic inflammation.     

Effect of hydrophilic polymers on buccoadhesive eudragit patches of propranolol hydrochloride using factorial design

The purpose of this study was to develop formulations and systematically evaluate in vitro performances of buccoadhesive patches of propranolol hydrochloride using the hydrophobic polymer Eudragit L-100 as the base matrix. The hydrophilic polymers Carbopol 934 and polyvinyl pyrrolidone (PVP) K30 were incorporated into the Eudragit patches, to provide the patches with bioadhesive properties and to modify the rate of drug release. The patches, which were prepared by the solvent casting method, were smooth and elegant in appearance; were uniform in thickness, weight, and drug content; showed no visible cracks; and showed good folding endurance. A 3² full factorial design was employed to study the effect of independent variables like hydrophilic polymers Carbopol 934 and PVP K30, which significantly influenced characteristics like swelling index, ex vivo mucoadhesive strength, in vitro drug release, and ex vivo residence time. A stability study of optimized Eudragit patches was done in natural human saliva; it was found that both drug and buccal patches were stable in human saliva. It can be concluded that the present buccal formulation can be an ideal system to improve the bioavailability of the drug by avoiding hepatic first-pass metabolism. Published: June 22, 2007     

Development and evaluation of topical formulation containing solid lipid nanoparticles of vitamin A

The purpose of this research was to investigate novel particulate carrier system such as solid lipid nanoparticles (SLN) for topical application of vitamin A palmitate and to study its beneficial effects on skin. Topical gels enriched with SLN of vitamin A were prepared. The solid lipid nanoparticulate dispersion was prepared using high-pressure homogenization technique and was incorporated into polymeric gels of Carbopol, Pemulen, Lutrol, and Xanthan gum for convenient application. The nanoparticulate dispersion and its gels were evaluated for various parameters such as particle size, in vitro drug release, in vitro penetration, in vivo skin hydration, and skin irritation. The solid lipid nanoparticulate dispersion showed mean particle size of 350 nm. Differential scanning calorimetry studies revealed no drugexcipient incompatibility. In vitro release profile of vitamin A palmitate from nanoparticulate dispersion and its gel showed prolonged drug release up to 24 hours, which could be owing to embedment of drug in the solid lipid core. In vitro penetration studies showed almost 2 times higher drug concentration in the skin with lipid nanoparticle-enriched gel as compared with conventional gel, thus indicating better localization of the drug in the skin. In vivo skin hydration studies in albino rats revealed increase in the thickness of the stratum corneum with improved skin hydration. The developed formulation was nonirritant to the skin with no erythema or edema and had primary irritation index of 0.00. Thus it can be concluded that SLN represents a promising particulate carrier having controlled drug release, improved skin hydration, and potential to localize the drug in the skin with no skin irritation.     

Formulation and evaluation of ethosomes for transdermal delivery of lamivudine

The purpose of the present research was to investigate the mechanism for improved intercellular and intracellular drug delivery from ethosomes using visualization techniques and cell line study. Ethosomal formulations were prepared using lamivudine as model drug and characterized in vitro, ex vivo and in vivo. Transmission electron microscopy, scanning electron microscopy, and fluorescence microscopy were employed to determine the effect of ethosome on ultrastructure of skin. Cytotoxicity and cellular uptake of ethosome were determined using T-lymphoid cell line (MT-2). The optimized ethosomal formulation showed 25 times higher transdermal flux (68.4 +/- 3.5 microg/cm(2)/h) across the rat skin as compared with that of lamivudine solution (2.8 +/- 0.2 microg/cm(2)/h). Microscopic studies revealed that ethosomes influenced the ultrastructure of stratum corneum. Distinct regions with lamellar stacks derived from vesicles were observed in intercellular region of deeper skin layers. Results of cellular uptake study showed significantly higher intracellular uptake of ethosomes (85.7% +/- 4.5%) as compared with drug solution (24.9% +/- 1.9%). The results of the characterization studies indicate that lipid perturbation along with elasticity of ethosomes vesicles seems to be the main contributor for improved skin permeation.     

Halobetasol propionate-loaded solid lipid nanoparticles (SLN) for skin targeting by topical delivery

The clinical use of halobetasol propionate (HP) is related to some adverse effects like irritation, pruritus and stinging. The purpose of this work was to construct HP-loaded solid lipid nanoparticles (HP-SLN) formulation with skin targeting to minimizing the adverse side effects and providing a controlled release. HP-SLN were prepared by solvent injection method and formula was optimized by the application of 3² factorial design. The nanoparticulate dispersion was evaluated for particle size and entrapment efficiency (EE). Optimized batch was characterized for differential scanning calorimetry (DSC), scanning electron microscopy, X-ray diffraction study and finally incorporated into polymeric gels of carbopol for convenient application. The nanoparticulate gels were evaluated comparatively with the commercial product with respect to ex-vivo skin permeation and deposition study on human cadaver skins and finally skin irritation study. HP-SLN showed average size between 200?nm and 84–94% EE. DSC studies revealed no drug-excipient incompatibility and amorphous dispersed of HP in SLN. Ex vivo study of HP-SLN loaded gel exhibited prolonged drug release up to 12?h where as in vitro drug deposition and skin irritation studies showed that HP-SLN formulation can avoid the systemic uptake, better accumulative uptake of the drug and nonirritant to the skin compared to marketed formulation. These results indicate that the studied HP-SLN formulation represent a promising carrier for topical delivery of HP, having controlled drug release, and potential of skin targeting with no skin irritation.     

Characterization of new DOPC/DHPC platform for dermal applications

Systems formed by mixtures of the phospholipids dioleoylphosphatidylcholine (DOPC) and dihexanoylphosphatidylcholine (DHPC) were characterized by use of differential scanning calorimetry, small angle X-ray scattering and two electron-microscopy techniques, freeze fracture electron microscopy and cryogenic transmission electron microscopy. These techniques allowed for the determination of the size, morphology, structural topology, self-assembly and thermotropic behavior of the nanostructures present in the mixtures. The interaction between the two phospholipids provides curvatures, irregularities and the increase of thickness and flexibility in the membrane. These effects led to the formation of different aggregates with a differential distribution of both phospholipids. The effect of these systems on the skin in vivo was evaluated by measurement of the biophysical skin parameters. Our results show that the DOPC/DHPC application induces a decrease in the permeability and in the hydration of the tissue. These effects in vivo are related to different microstructural changes promoted by these systems in the skin in vitro, published in a recent work. The fundamental biophysical analyses of DOPC/DHPC systems contribute to our understanding of the mechanisms that govern their interaction with the skin.     

Enhanced transdermal delivery of salbutamol sulfate via ethosomes

The main objective of the present work was to compare the transdermal delivery of salbutamol sulfate (SS), a hydrophilic drug used as a bronchodilator, from ethosomes and classic liposomes containing different cholesterol and dicetylphosphate concentrations. All the systems were characterized for shape, particle size, and entrapment efficiency percentage, by image analysis optical microscopy or transmission electron microscopy, laser diffraction, and ultracentrifugation, respectively. In vitro drug permeation via a synthetic semipermeable membrane or skin from newborn mice was studied in Franz diffusion cells. The selected systems were incorporated into Pluronic F 127 gels and evaluated for both drug permeation and mice skin deposition. In all systems, the presence of spherical-shaped vesicles was predominant. The vesicle size was significantly decreased (P < .05) by decreasing cholesterol concentration and increasing dicetylphosphate and ethanol concentrations. The entrapment efficiency percentage was significantly increased (P < .05) by increasing cholesterol, dicetylphosphate, and ethanol concentrations. In vitro permeation studies of the prepared gels containing the selected vesicles showed that ethosomal systems were much more efficient at delivering SS into mice skin (in terms of quantity and depth) than were liposomes or aqueous or hydroalcoholic solutions.     

Liquid Crystalline Systems for Transdermal Delivery of Celecoxib: In Vitro Drug Release and Skin Permeation Studies

Liquid crystalline systems of monoolein/water could be a promising approach for the delivery of celecoxib (CXB) to the skin because these systems can sustain drug release, improve drug penetration into the skin layers and minimize side effects. This study evaluated the potential of these systems for the delivery of CXB into the skin based on in vitro drug release and skin permeation studies. The amount of CXB that permeated into and/or was retained in the skin was assayed using an HPLC method. Polarizing light microscopy studies showed that liquid crystalline systems of monoolein/water were formed in the presence of CXB, without any changes in the mesophases. The liquid crystalline systems decreased drug release when compared to control solution. Drug release was independent of the initial water content of the systems and CXB was released from cubic phase systems, irrespective of the initial water content. The systems released the CXB following zero-order release kinetics. In vitro drug permeation studies showed that cubic phase systems allowed drug permeation and retention in the skin layers. Cubic phase systems of monoolein/water may be promising vehicles for the delivery of CXB in/through the skin because it improved CXB skin permeation compared with the control solution.KEY WORDS: celecoxib, drug delivery systems, liquid crystalline system, monoolein, skin permeation     

Formulation and development of novel control release transdermal patches of carvedilol to improve bioavailability for the treatment of heart failure

The main aim of this study is to optimize and evaluate transdermal patch of Carvedilol by the use of different polymer and different permeation enhancers which help to release drug in controlled action and thereby increase the bioavailability of the drug. Main objective was to avoid first pass metabolism of Carvedilol. Transdermal patches were developed by solvent evaporation method. The combination of Eudragit RS-100 as rate controlling polymer and Span 80 as a permeation enhancer was found to be ideal formulation (Formulation F7) with maximum drug release i.e. 100.29 ± 0.44 % within 12 h. Formulation F7 showed maximum bioavailability and showed maximum drop of BP at 6 h. From this study the conclusion was, transdermal patch of Carvedilol which contains Eudragit RS-100 polymer and Span 80 as penetration enhancer produced sustained and continued drug release.     

Drug in Adhesive Patch of Zolmitriptan: Formulation and In vitro /In vivo Correlation

The objective of the present study was to develop transdermal patch for zolmitriptan, determine its in vivo absorption using the rabbit skin. Solvent evaporation technique prepared zolmitriptan patch was settled in two-chamber diffusion cell combined with excised rabbit abdomen skin for permeation study. A sufficient cumulative penetration amount of zolmitriptan (258.5 ± 26.9 μg/cm² in 24 h) was achieved by the formulation of 4% zolmitriptan, 10% Azone, and adhesive of DURO-TAK® 87–4098. Pharmacokinetic parameters were determined via i.v. and transdermal administrations using animal model of rabbit. The results revealed that the absolute bioavailability was about 63%. Zolmitriptan could be detected with drug level of 88 ± 51 ng/mL after transdermal administration of 15 min. The in vivo absorption curve obtained by deconvolution approach using WinNonlin® program was correlated well with the in vitro permeation curve, the correlation coefficient R is 0.84, and the result indicated that in vitro skin permeation experiments were useful to predict the in vivo performance. In addition, little skin irritation was found in the irritation study. As a conclusion, the optimized zolmitriptan transdermal patches could effectively deliver adequate drug into systemic circulation in short time without producing any irritation phenomenon and worth to be developed.KEY WORDS: chemical enhancer, drug-in-adhesive patch, in vitro/in vivo correlation, pharmacokinetic, zolmitriptan     

Clobetasol propionate solid lipid nanoparticles cream for effective treatment of eczema: formulation and clinical implications

In the present study clobetasol propionate (Cp) was loaded as solid lipid nanoparticles (SLN), incorporated it in suitable cream base and evaluated in vitro and its performance clinically against equivalent marketed formulation. Cp was incorporated into SLN by high-pressure homogenization technique and characterized for mean particle size, surface morphology and per cent drug entrapment. Drug permeation and skin uptake studies from Cp creams were carried out in a validated Franz static diffusion cell across human cadaver skin (HCS). Sixteen chronic eczema patients were enrolled in a controlled double blind clinical trial. Optimized Cp-SLN was smooth and spherical under scanning electron microscopy; with average particle size of 177 nm and per cent drug entrapment of 92.05%. In vitro permeation studies revealed lower mean flux value and higher skin uptake of Cp from Cp-SLN cream compared to marketed drug cream. Both formulations were found to be responsive to manifestations of chronic eczema, while Cp-SLN cream prepared in this investigation registered significant improvement in therapeutic response (1.9 fold; inflammation, 1.2 fold; itching) in terms of per cent reduction in degree of inflammation and itching against marketed cream. Further clinical trials are required to ascertain the efficiency of the present formulation.     

Nanoemulsion based gel for transdermal delivery of meloxicam: Physico-chemical,mechanistic investigation

AimsThe aim of the present investigation was to develop a nanoemulsion (NE) gel formulation for the transdermal delivery of meloxicam (MLX) in order to ensure maximum controlled and sustained drug release capacity.Main methodsThe MLX containing NE gel was prepared and characterized for particle size, zeta potential, pH, rheology, in vitro drug release, in vitro skin permeation, and in vitro hemolysis. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) of MLX-NE gel treated rat skin was performed to investigate the skin permeation mechanism of meloxicam from NE gel. Skin permeation potential of the developed gel formulation was assessed using confocal laser scanning microscopy (CLSM). The in vivo toxicity of MLX-NE gel was assessed by histopathological examination in rat. The rat paw edema test was performed to evaluate the anti-inflammatory activity of MLX-NE gel.Key findingsPercutaneous absorption studies demonstrated a higher permeation of meloxicam from NE gel, than the drug solution. FTIR and DSC studies supported stratum corneum lipid extraction as a possible penetration enhancer mechanism for MLX-NE gel. CLSM studies confirmed the permeation of the NE gel formulation to the deeper layers of the skin (up to 130 μm). MLX-NE gel turned out to be non-irritant, biocompatible, and provided maximum inhibition of paw edema in rats over 24 h in contrast to MLX solution.SignificanceThe nanoemulsion gel formulation may hold promise as an effective alternative for the transdermal delivery of meloxicam.     

Development of alginate-reinforced chitosan nanoparticles utilizing W/O nanoemulsification/internal crosslinking technique for transdermal delivery of rabeprazole

Aims

First; to develop rabeprazole (RP)-alginate core coated chitosan nanoparticles (NP) utilizing water in oil (W/O) nanoemulsion technique. Second; formulation of transdermal patches loaded RP-NP that avoid drug peroral acid sensitivity and first pass effect.

Main methods

The influence of six factors on RP-NP formulation was investigated using Plackett–Burman (PB) design. The studied factors were considered for their effect on particle size (Y1) and loading efficiency (Y2). Formulation optimum desirability was identified; a proposed formulation was prepared and characterized. In vitro permeation of the prepared NP compared with RP was studied. Transdermal patches loaded drug or RP-NP were prepared and characterized. Patches ex vivo permeation through rat skin was studied, and kinetic analysis and permeation mechanism were investigated.

Key Finding

Chitosan, oil phase and surfactant to oil ratios had significant effects on Y1, while Y2 was significantly affected by the same variables affecting Y1 and span80-tween80 ratio. Scanning electron microscope imaging illustrated sphericity of the NP. The optimized RP-NP exhibited sustained release pattern. The prepared patches showed a minimal patch to patch variable. Patches loaded RP-NP exhibited substantial skin permeability and controlled drug release, and were in favor of Fickian diffusion.

Significance

Transdermal patches loaded RP-NP is effective drug delivery and alternative to drug peroral route.     

Mucoadhesive bilayer tablets of propranolol hydrochloride

The purpose of this research was to study mucoadhesive bilayer buccal tablets of propranolol hydrochloride using the bioadhesive polymers sodium alginate (Na-alginate) and Carbopol 934P (CP) along with ethyl cellulose as an impermeable backing layer. The tablets were evaluated for weight variation, thickness, hardness, friability, surface pH, mucoadhesive strength, swelling index, in vitro drug release, ex vivo drug permeation, ex vivo mucoadhesion, and in vivo pharmacodynamics in rabbits. Tablets containing Na-alginate and CP in the ratio of 5∶1 (F2) had the maximum percentage of in vitro drug release without disinte-gration in 12 hours. The swelling index was proportional to Na-alginate content and inversely proportional to CP content. The surface pH of all tablets was found to be satis-factory (7.0±1.5), close to neutral pH; hence, buccal cavity irritation should not occur with these tablets. The mechanism of drug release was found to be non-Fickian diffusion and followed zero-order kinetics. The formulation F4 was optimized based on good biodhesive strength (28.9±0.99 g) and sustained in vitro drug permeation (68.65%±3.69% for 12 hours). The behavior of formulation F4 was examined in human saliva, and both the drug and the buccal tablet were found to be stable. The formulation F4 was applied to rabbit oral mucosa for in vivo studies. The formulation inhibited isoprenaline-induced tachycardia. The studies conducted in rabbits confirmed the sustained release as compared with intravenous administration. Published: September 21, 2007     

Formulation and Evaluation of Buccal Patches for Delivery of Atenolol

Buccal patches for the delivery of atenolol using sodium alginate with various hydrophilic polymers like carbopol 934 P, sodium carboxymethyl cellulose, and hydroxypropyl methylcellulose in various proportions and combinations were fabricated by solvent casting technique. Various physicomechanical parameters like weight variation, thickness, folding endurance, drug content, moisture content, moisture absorption, and various ex vivo mucoadhesion parameters like mucoadhesive strength, force of adhesion, and bond strength were evaluated. An in vitro drug release study was designed, and it was carried out using commercial semipermeable membrane. All these fabricated patches were sustained for 24 h and obeyed first-order release kinetics. Ex vivo drug permeation study was also performed using porcine buccal mucosa, and various drug permeation parameters like flux and lag time were determined.     

Preparation of budesonide and budesonide-PLA microparticles using supercritical fluid precipitation technology

The objective of this study was to prepare and characterize microparticles of budesonide alone and budesonide and polylactic acid (PLA) using supercritical fluid (SCF) technology. A precipitation with a compressed antisolvent (PCA) technique employing supercritical CO₂ and a nozzle with 100-μm internal diameter was used to prepare microparticles of budesonide and budesonide-PLA. The effect of various operating variables (temperature and pressure of CO₂ and flow rates of drug-polymer solution and/or CO₂) and formulation variables (0.25%, 0.5%, and 1% budesonide in methylene chloride) on the morphology and size distribution of the microparticles was determined using scanning electron microscopy. In addition, budesonide-PLA particles were characterized for their surface charge and drug-polymer interactions using a zeta meter and differential scanning calorimetry (DSC), respectively. Furthermore, in vitro budesonide release from budesonide-PLA microparticles was determined at 37°C. Using the PCA process, budesonide and budesonide-PLA microparticles with mean diameters of 1 to 2 μm were prepared. An increase in budesonide concentration (0.25%–1% wt/vol) resulted in budesonide microparticles that were fairly spherical and less aggiomerated. In addition, the size of the microparticles increased with an increase in the drug-polymer solution flow rate (1.4–4.7 mL/min) or with a decrease in the CO₂ flow rate (50–10 mL/min). Budesonide-PLA microparticles had a drug loading of 7.94%, equivalent to ∼80% encapsulation efficiency. Budesonide-PLA microparticles had a zeta potential of— 37±4 mV, and DSC studies indicated that SCF processing of budesonide-PLA microparticles resulted in the loss of budesonide crystallinity. Finally, in vitro drug release studies at 37°C indicated 50% budesonide release from the budesonide-PLA microparticles at the end of 28 days. Thus, the PCA process was successful in producing budesonide and budesonide-PLA microparticles. In addition, budesonide-PLA microparticles sustained budesonide release for 4 weeks.     

Study on drug release behaviors of poly-alpha,beta-[n-(2-hydroxyethyl)-L-aspartamide]-g-poly(epsilon-caprolactone) nano- and microparticles

Biodegradable amphiphilic graft copolymers poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide]-g-poly(epsilon-caprolactone) (PHEA-g-PCL) with different branch lengths were synthesized through the ring-opening polymerization of epsilon-caprolactone initiated by the macroinitiator PHEA bearing hydroxyl groups. With use of the graft copolymers with different compositions, nanoparticle drug delivery systems with sizes smaller than 100 nm were prepared by a dialysis method, and microparticle drug delivery systems with sizes smaller than 5 microm were fabricated by a melting-emulsion method. The regularly spherical shapes of the drug-loaded nano- and microparticles were verified by transmission electron microscopy and scanning electron microscopy. In vitro drug release properties of nano- and microparticle drug delivery systems were investigated, with the emphasis on the effects of polymer composition, particle size, and drug-loading content on the release behaviors.     

Predictivity of an in vitro model for acute and chronic skin irritation (SkinEthic) applied to the testing of topical vehicles

An in vitro human reconstructed epidermis model (SkinEthic) used for screening acute and chronic skin irritation potential was validated against in vivo data from skin tolerability studies. The irritation potential of sodium lauryl sulfate (SLS), calcipotriol and trans-retinoic acid was investigated. The in vitro epidermis-like model consists of cultures of keratinocytes from human foreskin on a polycarbonate filter. The modulation of cell viability, the release and gene expression of proinflammatory cytokines, interleukins 1α and 8, and morphological changes were evaluated during 3 days as endpoints representative for an inflammatory reaction. The cumulative irritation potential of the topical products was evaluated in a human clinical study by visual scoring and biophysical measurement of inflammatory skin reaction after repeated 24 h applications over 3 weeks under Finn chamber patches. All topical products that were nonirritating in the human study were noncytotoxic and did not induce cytokine expression in the in vitro acute model (day 1 exposure). All irritating controls exhibited specific cell viability and cytokine patterns, which were predictive of the in vivo human data. The ranking of mild to moderate skin irritation potential was based on the lack of cytotoxicity and the presence of cytokine patterns including gene expression specific for each irritant, using the chronic in vitro model (up to 3 days exposure). The human reconstructed epidermis model SkinEthic was shown to be a reliable preclinical tool predicting the irritation potential of topical products. Moreover, it is a useful model in a two-step tiered strategy for screening acute and chronic irritation potential for the selection of vehicles for new topical drugs. This revised version was published online in July 2006 with corrections to the Cover Date.