Electron microscopic studies of procollagen from cultured human fibroblasts

Tropocollagen was extracted from the extracellular fibers of the cell layers of cultured human fibroblasts and procollagen was isolated from the medium. The tropocollagen precipitated as segment long spacing (SLS) aggregates from an ATP-acetic acid solution, but procollagen formed predominantly fibrous long spacing (FLS) crystallites in the same solution. The procollagen aggregates were distinguished from those of tropocollagen by the presence of globular caps at one (SLS form) or both (FLS form) ends. The globular caps were selectively removed by limited digestion with pepsin. They are thought to be formed from the nonhelical, aminoterminal peptides of the procollagen molecule. These globular peptides coil back 200 Å on the long axis of the molecule and contribute no more than 90 Å to its length. They appear to prevent the molecules from aggregating as native fibers in vitro.     

Biochemical and biophysical characterization of collagen in Tenebrio molitor L. (Coleoptera, Tenebrionidae)

The collagen from the mesenteric sheath of the tenebrionid insect Tenebrio molitor was extracted by limited pepsin digestion and purified. This collagen was characterized using CM-cellulose chromatography, sodium-dodecylsulfate disc-gel electrophoresis and aminoacid analysis. This molecule was found to be assembled from three identical alpha chains and could be represented by the formula (alpha) 3. The amino acid composition is characteristic of collagen (one-third glycine, high iminoacid content), with high content of hydroxylysine and low content of alanine. Cyanogen bromide digests of these chains indicated that they are not related to any of the known invertebrate or vertebrate chains of interstitial collagens. The molecular weight (M = 280000D) and length (290 nm) were typical, and the banding patterns of the segment-long-spacing crystallites (SLS) and of the reconstitued fibrils were very similar to type I collagen. The denaturation temperature (Td) was 30.7 degrees C and correlated with the total pyrrolidine content as observed in other collagens (von Hippel & Wong's relation). It was concluded that the collagen from this insect showed the classical biochemical and biophysical features of other invertebrate interstitial "primitive" collagens.     

Recombinant Human Collagen XV Regulates Cell Adhesion and Migration

The C-terminal end of collagen XV, restin, has been the focus of several studies, but the functions of full-length collagen XV have remained unknown. We describe here studies on the production, purification, and function of collagen XV and the production of a monoclonal N-terminal antibody to it. Full-length human collagen XV was produced in insect cells using baculoviruses and purified from the cell culture medium. The yield was 15 mg/liter of cell culture medium. The collagen XV was shown to be trimeric, with disulfide bonds in the collagenous region. Rotary shadowing electron microscopy revealed rod-like molecules with a mean length of 241.8 nm and with a globular domain at one end. The globular domain was verified to be the N-terminal end by N-terminal antibody binding. The molecules show flexibility in their conformation, presumably due to the many interruptions in their collagenous domains. The ability of collagen XV to serve as a substrate for cells was tested in cell adhesion assays, and it was shown that cells did not bind to collagen XV-coated surfaces. When added to the culture medium of fibroblasts and fibrosarcoma cells, however, collagen XV rapidly bound to their fibronectin network. Solid phase assays showed that collagen XV binds to fibronectin, laminin, and vitronectin and that it binds to the collagen/gelatin-binding domain of fibronectin. No binding was detected to fibrillar collagens, fibril-associated collagens, or decorin. Interestingly, collagen XV was found to inhibit the adhesion and migration of fibrosarcoma cells when present in fibronectin-containing matrices.     

Comparative electron-microscope studies on type-III and type-I collagens.

Long-spacing-segment crystallites prepared from type III collagen with the chain composition [alpha1(III)]3 and type I collagen with the chain composition [alpha(I)]i12alpha2 have been compared in the electron microscope after positive. staining with phosphotungstic acid and uranyl acetate. The comparison revealed several differences in intensities of the cross-striation bands as well as significant differences in band positions. The latter occur most prominently in three distinct regions of the crystallites. Further, crystallites prepared from type III collagen contain an additional intensely staining band in an area corresponding to the carboxy-terminal end of the molecule. The latter band is still observed following limited pepsin digestion and presumably represents a slight elongation of the helical portion of the type III molecule when compared to the type I molecule. In spite of the somewhat altered distribution of charged groups as indicated in studies on the long-spacing-segment crystallites, type III molecules are capable of forming fibrils of the native type with a cross-striation pattern and periodicity virtually identical to that observed when type I molecules are precipitated as native fibers.     

The tissue form of type VII collagen is an antiparallel dimer

We recently reported the partial characterization of a new human collagen termed Type VII. This molecule is distinctive among the collagen family in that it contains three identical subunit alpha chains within a triple helical domain 424 nm in length. The molecule contains three identical alpha chains which are genetically distinct from other known collagens. Previous studies indicate that a portion of the limited pepsin-solubilized molecules appears to exist as antiparallel dimers associated by disulfide bonds. In this report, we demonstrate that the major tissue form of Type VII collagen is a dimer, associated by disulfide bonds through a 60-nm overlap of the aminoterminal triple helical ends. Intermolecular disulfide bonds occur only within this overlap region. Interchain disulfide bonds exist in the carboxyl terminal 7% of the molecule and may exist within the overlap region as well. Disulfide bond-stabilized aggregates larger than dimers are not seen.     

A network model for the organization of type IV collagen molecules in basement membranes

Type IV collagen was solubilized from a tumor basement membrane either by acid extraction or by limited digestion with pepsin. The two forms were similar in composition and the size of the constituent chains but differed when examined by electron microscopy and in the fragment pattern produced by bacterial collagenase. The acid-soluble form showed after rotary shadowing strands mainly of a length of 320 nm which terminated in a globule, or two strands connected by a similar globule. The globule was identified as a non-collagenous domain (NC1) which under dissociating conditions could be separated into two peptides showing a monomer-dimer relationship. Higher aggregates of NC1 were visualized under non-dissociating conditions. Some of the acid-extracted molecules have retained the previously 7-S collagen domain. The pepsin-solubilized form lacked domain NC1 and consisted mainly of four triple-helical strands (length 356 nm) joined together at the 7-S domain (length 30 nm). Common to both forms of type IV collagen was a small collagenase-resistant domain NC2 which was composed of collagenous and non-collagenous elements and located between the 7-S domain and the major triple helix. These data indicate that the collagenous matrix of basement membranes consists of a regular network of type IV collagen molecules which is generated by two different interacting sites located at opposite ends of each molecule. The 7-S collagen domain connects four molecules while the NC1 domain connects two molecules. The maximal distance between identical cross-linking sites (7-S or NC1) was estimated to be about 800 nm comprising the length of two molecules.     

Molecular characterization of cuticle and interstitial collagens from worms collected at deep sea hydrothermal vents

Two different collagens were isolated and characterized from the body walls of the vestimentiferan tube worm Riftia pachyptila and the annelid Alvinella pompejana, both living around hydrothermal vents at a depth of 2600 m. The acid-soluble cuticle collagens consisted of a long triple helix (2.4 microns for Alvinella, 1.5 microns for Riftia) terminating into a globular domain. Molecular masses of 2600 and 1700 kDa, respectively, were estimated from their dimensions. The two cuticle collagens were also quite different in amino acid composition, in agreement with their different supramolecular organizations within tissues. Interstitial collagens corresponding to cross-striated fibrils underneath the epidermal cells could be solubilized by digestion with pepsin and consisted of a single alpha-chain. They were similar in molecular mass (340 kDa) and length (280 nm) but differed in composition and banding patterns of segment-long-spacing fibrils. This implicates significant sequence differences also in comparison to fibril-forming vertebrate collagens, although all form typical quarter-staggered fibrils. The thermal stability of the worm collagens was, with one exception (interstitial collagen of Riftia), in the range of mammalian and bird collagens (37 to 46 degrees C), and thus distinctly above that of shallow sea water annelids. Yet, their 4-hydroxyproline contents were not directly correlated to this stability. About 20% of Riftia collagen alpha-chain sequence was elucidated by Edman degradation and showed typical Gly-X-Y repeats but only a limited homology (45 to 58% identity) to fibril-forming vertebrate collagens. A single triplet imperfection and the variable hydroxylation of proline in the X position were additional unique features. It suggests that this collagen represents an ancestral form of fibril-forming collagens not directly corresponding to an individual fibril-forming collagen type of vertebrates.     

Cockroach collagen: isolation, biochemical and biophysical characterization

Collagen fibrils from the mesenteric connective sheath of the adult cockroach Periplaneta americana were extracted by enzymatic digestion with pepsin and were purified. Chromatographic studies and sodium dodecylsulfate electrophoresis revealed the presence of a single chain. It was demonstrated that the structure of this collagen could be represented by the formula (alpha)3. The amino acid composition is typical of collagens (one-third glycine, and a high imino acid content) and similar to that of type II. The carbohydrate content was high (8.8%), and the cyanogen bromide pattern was different from that of known collagens. The chains were linked by the stable intermolecular bond dihydroxylysinonorleucine. The banding patterns of the segment-long-spacing crystallites and of the reconstituted fibrils were similar to type I collagen. The molecular weight (Mr 280,000) and length (285 nm) were typical, but the denaturation temperature was high (38.5 degrees C). It was concluded that cockroach mesenteric collagen showed the characteristic features of invertebrate mesodermal collagens, except that of the thermal stability of the triple-helical structure.     

The solubilization of bone and dentin collagens by pepsin. Effect of cross-linkages and non-collagen components.

Bone and dentin collagen are less susceptible to solubilization by pepsin digestion then is skin collagen. Digestion at 4 degrees C for 72 h solubilized only 35.3% of bovine cortical bone and 5.6% of bovine dentin compared with nearly 100% dissolution of bovine skin. Sodium dodecyl sulfate-acrylamide gel electrophoresis and molecular sieve chromatography showed that, for bone and dentin, intact alpha chains and cross-linked aggregates of beta, gamma and higher weight remained intact after pepsin solubilization but lower molecular weight fragments also were prevalent indicating chain scission in helical regions. Electron microscopic examination of segment long spacing precipitates of the soluble collagens confirmed the presence of solubilized polymerized collagen. The principal reducible cross-link in both bone and dentin was the precursor of dihydroxylsinonorleucine and this cross-link was also present in the solubilized collagens. Small amounts of non-collagenous proteins and glycosaminoglycans of different compositions in dentin and bone resisted extraction before pepsin digestion. However, the differences in solubilization of the collagens have been related to differences in cross-linkage placement.     

Molecular structure and interaction of recombinant human type XVI collagen

Collagen XVI is a minor component of at least two different extracellular fibrillar networks of specialized regions of skin and cartilage. In skin, collagen XVI is integrated into particular fibrillin-rich microfibrils lacking an amorphous elastin core. In cartilage, collagen XVI is a component of small heterotypic D-banded fibrils, mainly occurring in the territorial matrix of chondrocytes. Here, we present the first direct evidence for the molecular structure and functional properties of these fibril-associated collagens with interrupted triple helices (FACIT). We have expressed recombinantly the full-length alpha1 chain of human collagen XVI in HEK 293 EBNA cells in large quantities using an episomal expression system. Secreted full-length recombinant collagen XVI forms stable disulfide-bonded homotrimers and is rapidly proteolytically processed to distinct fragments at specific protease sequence motifs, one resembling an aggrecanase recognition site. Limited trypsin digestion assays and thermal transition curves imply sequential thermal denaturation of individual triple helical domains of this recombinant collagen, similar to authentic collagen XVI. Molecular images of collagen XVI reveal rod-like molecules which harbor multiple sharp kinks attributing a highly flexible structure presumably introduced by non-collagenous (NC) regions. Terminally located cloverleaf-shaped nodules correspond to the large NC NC11 domain of trimeric collagen XVI. The total length of individual trimeric recombinant collagen XVI molecules constitutes about 240 nm as calculated by atomic force and negative staining electron microscopy. Recombinant collagen XVI interacts with fibrillin-1 and with fibronectin indicating multiple molecular interactions in which this ubiquitously expressed and versatile FACIT-collagen can participate. In vitro generated collagen XVI provides an indispensable tool for future determination of its function during supramolecular assembly of matrix aggregates and its role in maintenance, organization and interaction of fibrillar structures.     

Characterization of the tissue form of type V collagen from chick bone

Type V collagen was prepared from acetic acid extracts of lathyritic chick bone. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the extracted material demonstrated two collagenous bands of slower mobility than pepsin-extracted alpha 1(V) and alpha 2(V) chains. Cyanogen bromide peptide maps of these protein bands identified them as forms of alpha 1(V) and alpha 2(V). Segment long spacing (SLS) crystallite banding patterns of the acid-extracted Type V were identical within the triple-helical domain to the SLS banding patterns of pepsin-extracted Type V collagen, supporting the identification of this material. A globular domain at one end of the triple helix of the acid-extracted Type V was visualized by both rotary shadowing and negative staining of SLS crystallites. The molecular weights of the globular terminal peptides were 18,000 and 29,000, respectively, for alpha 1(V) and alpha 2(V), as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after bacterial collagenase digestion of the isolated alpha chains. The results presented here indicate that fully processed Type V collagen in chick bone exists as a higher molecular weight form than that from pepsin extracts and retains a globular domain at one end of the triple helix. This is in contrast to the interstitial collagens in which only very small non-triple-helical domains (telopeptides) are retained in the fully processed molecules. In vitro aggregation studies demonstrated the intact fully processed form of Type V collagen forms uniform small-diameter fibrous structures. These results suggest that Type V collagen may be present in fibrous structures within tissues.     

Biochemical and physiochemical characterization of pepsin-solubilized type-II collagen from bovine articular cartilage.

Solubilization of collagen from bovine articular with pepsin requires the preliminary extraction of proteoglycans from the ground substance. Biochemical and physiochemical properties of this pepsin-solubilized collagen are independent of the pretreatment (extraction with 1.5M-CaCl2, 5M-guanidinium chloride or 0.2M-NaOH) and of the age range (2-4-year-old and 2-month-old animals). Characterization of the de-natured components, of the CNBr peptides and of the amino acid and cross-link composition shows that the collagen of the hyaline cartilage is all type II. Electrical birefringence measurements showed the presence of tropocollagen molecules (length 280nm) and molecules whose length is slightly less than twice that of the tropocollagen molecules. This latter molecule may be a dimer composed of two monomers linked by intermolecular head-to-tail bonds and whose theoretical length (530nm), according to the quarter-stagger theory, is in good agreement with our measured values (510-530nm). We have verified that the beta-components of this collagen are formed of two alpha-chains linked by the stable intermolecular bond, dehydrodihydroxylysinonorleucine. These dimeric molecules are absent from solutions of skin collagen whose beta-components possess only aldol-type intramolecular cross-links. Although reconstituted fibres from solutions of skin and cartilage collagen are similar, the segment-long spacing crystallites formed with pepsin-solubilized cartilage collagen present a symmetrical and dimeric form corresponding to the lateral aggregation of two monomers with an overlap (90nm) of the C-terminal ends.     

Folding of collagen IV

Collagen IV dimers of two collagen IV molecules connected by their C-terminal globular NC1 domains were isolated by limited digestion with bacterial collagenase from mouse Engelbreth-Holm-Swarm (EHS) sarcoma tissue. The collagenous domains were only 300 nm long as compared to 400 nm of intact collagen IV but the disulfide bonds in the N-terminal region of the major triple helix were retained. Unfolding of the collagenous domains as monitored by circular dichroism occurred in a temperature range of 30 to 44 degrees C with a midpoint at 37 degrees C. The transition is significantly broader than that of the continuous triple helices in collagens I, II and III, a feature which can be explained by the frequent non-collagenous interruptions in the triple-helical domain of collagen IV. Refolding at 25 degrees C following complete unfolding at 50 degrees C was monitored by circular dichroism, selective proteolytic digestion of non-refolded segments and by a newly developed method in which the recovered triple-helical segments were visualized by electron microscopy. Triple-helix formation was found to proceed in a zipper-like fashion from the C-terminal NC1 domains towards the N-terminus, indicating that this domain is essential for nucleations. For collagen IV dimers with intact NC1 domains the rate of triple-helix growth was of comparable magnitude to that of collagen III, demonstrating that the non-collagenous interruptions do not slow down the refolding process where the rate-limiting step is the cis-trans isomerization of proline peptide bonds. Refolding was near to 100% and the refolding products were similar to the starting material as judged by thermal stability and electron microscopic appearance. Removal of the NC1 domains by pepsin or dissociation of their hexametric structures by acetic acid led to a loss of the refolding ability. Instead products with randomly dispersed short triple-helical segments were formed in a slow reaction. In no case, even when the disulfide bonds in the N-terminal region of the triple-helical domain were intact, was refolding from the N- towards the C-terminus observed. Taken together with results in other collagens, this suggests that C to N directionality might be an intrinsic property of triple-helix folding.     

Type VII collagen is a major structural component of anchoring fibrils

Anchoring fibrils are specialized fibrous structures found in the subbasal lamina underlying epithelia of several external tissues. Based upon their sensitivity to collagenase and the similarity in banding pattern to artificially created segment-long spacing crystallites (SLS) of collagens, several authors have suggested that anchoring fibrils are lateral aggregates of collagenous macromolecules. We recently reported the similarity in length and banding pattern of anchoring fibrils to type VII collagen SLS crystallites. We now report the construction and characterization of a murine monoclonal antibody specific for type VII collagen. The epitope identified by this antibody has been mapped to the carboxyl terminus of the major helical domain of this molecule. The presence of type VII collagen as detected by indirect immunofluorescence in a variety of tissues corresponds exactly with ultrastructural observations of anchoring fibrils. Ultrastructural immunolocalization of type VII collagen using a 5-nm colloidal gold-conjugated second antibody demonstrates metal deposition upon anchoring fibrils at both ends of these structures, as predicted by the location of the epitope on type VII collagen. Type VII collagen is synthesized by primary cultures of amniotic epithelial cells. It is also produced by KB cells (an epidermoid carcinoma cell line) and WISH (a transformed amniotic cell line).     

Type XIV collagen, a new homotrimeric molecule extracted from fetal bovine skin and tendon, with a triple helical disulfide-bonded domain homologous to type IX and type XII collagens

Previously undescribed disulfide-bonded collagenous pepsin-derived fragments have been isolated from fetal calf tendon and skin. One fragment, 10.5 kDa after reduction, was shown to be similar but distinct to the COL1 domain of the recently characterized type XII collagen (64% primary structure identity). The similarity includes important features such as size, location of the cysteine residues, and nature and position of an imperfection of the triple helix. From fetal calf skin, two approximately 34-kDa disulfide-bonded trimeric fragments were isolated in the unreduced form. Amino acid sequencing showed that one fragment contained solely the COL1 domain of type XII collagen while the other one only contained the COL1 domain of the new chain. Like type XII collagen, the new chain is therefore part of a homotrimeric molecule and should thus be considered as a distinct collagen type. We propose to call the molecule from which this fragment is derived, type XIV collagen, with a chain composition (alpha 1 (XIV]3. The presence of a domain similar to the COL1 domain of collagens types IX and XII suggests that type XIV collagen belongs to the group of fibril-associated collagens with interrupted triple helices (FACIT). Two other fragments, 13.5 and 17 kDa after reduction, were also purified. They were shown to contain the same triple helical domain with different pepsin cleavage sites at the amino terminus. Several tryptic peptides were sequenced, and the derived sequences could be aligned with the COL2 domain of type XII collagen or with flanking sequences in the NC2 and NC3 domains (61% sequence identity). These fragments are very likely to be also derived from type XIV collagen.     

Pepsin-generated type VI collagen is a degradation product of GP140

A major extracellular matrix glycoprotein, GP140 , synthesized by WI-38 human lung fibroblasts has previously been shown to be collagen-like. A form of GP140 that is related to extracellular matrix GP140 both antigenically and in apparent molecular mass was isolated from human placenta. Types I-VI collagen were isolated from human tissues by limited pepsin digestion, selective salt precipitation, and chromatography. Immunoblot analysis of the collagens and GP140 utilizing affinity-purified polyclonal antiserum directed against extracellular matrix GP140 demonstrated cross-reactivity of antibodies with type VI collagen. Both type VI collagen and matrix GP140 could be digested with bacterial collagenase following reduction with dithiothreitol but were collagenase insensitive under nonreducing conditions, unlike types I-V collagen. Placental and matrix GP140 and type VI collagen were shown to have receptors for 125I-labeled Lens culinaris lectin. Pepsin digestion of WI-38 extracellular matrix GP140 yielded a 64,000-dalton band which co-migrated with subunits of reduced type VI collagen on Coomassie-stained sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels, reacted with anti- GP140 antiserum and 125I-labeled L. culinaris lectin, and was collagenase-sensitive only under reducing conditions. CNBr fragmentation of extracellular matrix GP140 , the 64,000-dalton pepsin-resistant peptide of GP140 and type VI collagen followed by immunoblot analysis using anti- GP140 revealed similarities in peptide maps of GP140 and type VI collagen. Our data strongly suggest that GP140 and type VI collagen share characteristics that differ from those of other collagen types and that intermolecular disulfide bonding appears to stabilize these molecules in their native unreduced form, thus conferring collagenase resistance. Finally, the SC1 and SC2 subunits of type VI collagen appear to be generated by pepsin digestion of GP140 .     

Characterization of the precursor form of type VI collagen

Well characterized monospecific antisera against pepsin-extracted bovine type VI collagen were used to identify and characterize the intact form of type VI collagen. In immunoblotting experiments the antisera reacted with the pepsin-resistant fragments of the alpha 1(VI) and alpha 3(VI) chains, but not with the fragment of the alpha 2(VI) chain. Extracts obtained from uterus and aorta with 6 M guanidine HCl contained two immunoreactive polypeptides of Mr = 190,000 and 180,000 based on globular protein standards. Cleavage of extracts with pepsin generated the previously characterized pepsin-resistant fragments of alpha 1(VI) and alpha 3(VI), indicating that the higher molecular weight polypeptides represent the intact parent chains, alpha 1(VI) and alpha 3(VI). Digestion of extracts with bacterial collagenase released an Mr = 100,000 noncollagenous fragment from the alpha 1(VI) chain. Thus, intact type VI collagen in tissues contains a relatively short triple helical domain and at least one very large globular domain which is sensitive to pepsin but resistant to collagenase digestion. Immunoblotting revealed a polypeptide of Mr = 240,000, which we suggest represents the pro-alpha 1(VI) chain, in the culture medium of bovine fibroblasts. Bands intermediate in molecular weight between 240,000 and 190,000 were identified in cell layers. These findings establish type VI collagen as a protein with very large nontriple helical domains, a property that undoubtedly plays an important role in its function.     

Alpha 1 type IV collagen gene evolved differently from fibrillar collagen genes

Type IV collagen is a major structural component in basement membranes. It is considerably different from the fibrillar collagens, types I-III. For example, unlike fibrillar collagens, the triple helical domain of type IV collagen is frequently interrupted by nonhelical regions. In this report, we demonstrate several overlapping genomic clones which cover most of the mouse alpha 1(IV) chain. Electron microscopic analysis of R-loops revealed that there were at least 28 exons within 35 kilobases of the gene segment. The sizes of six exons were determined by DNA sequence analysis to be 81, 178, 134, 73, 129, and 213 base pairs. These sizes do not appear to be related to the 54-base pair coding unit which is characteristic of fibrillar collagen exons, suggesting that the alpha 1 type IV collagen gene evolved differently from the fibrillar collagen genes.     

Self‐association of streptococcus pyogenes collagen‐like constructs into higher order structures

A number of bacterial collagen‐like proteins with Gly as every third residue and a high Pro content have been observed to form stable triple‐helical structures despite the absence of hydroxyproline (Hyp). Here, the high yield cold‐shock expression system is used to obtain purified recombinant collagen‐like protein (V‐CL) from Streptococcus pyogenes containing an N‐terminal globular domain V followed by the collagen triple‐helix domain CL and the modified construct with two tandem collagen domains V‐CL‐CL. Both constructs and their isolated collagenous domains form stable triple‐helices characterized by very sharp thermal transitions at 35–37°C and by high values of calorimetric enthalpy. Procedures for the formation of collagen SLS crystallites lead to parallel arrays of in register V‐CL‐CL molecules, as well as centrosymmetric arrays of dimers joined at their globular domains. At neutral pH and high concentrations, the bacterial constructs all show a tendency towards aggregation. The isolated collagen domains, CL and CL‐CL, form units of diameter 4–5 nm which bundle together and twist to make larger fibrillar structures. Thus, although this S. pyogenes collagen‐like protein is a cell surface protein with no indication of participation in higher order structure, the triple‐helix domain has the potential of forming fibrillar structures even in the absence of hydroxyproline. The formation of fibrils suggests bacterial collagen proteins may be useful for biomaterials and tissue engineering applications.     

Isolation and partial characterization of a new alpha component of collagen from muscle of kuruma prawn Penaeus japonicus

• 1.1. A new α component, α2(Pr), was successfully isolated from the pepsin-solubilized collagen from the muscle of kuruma prawn.
• 2.2. The component α2(Pr) was genetically distinct from components comprising Type AR-I and AR-II collagens by peptide mapping with proteases, amino acid analysis, and immunoblotting, and had high contents of leucine and hydroxylsine, and a low content of alanine.
• 3.3. The effect of pepsin digestion on the molecule containing the α2(Pr) component was examined by using immunological techniques. The component α2(Pr) in intact form consisted of several types of components. Although they were all identical to each other in the helical region, each of them had a distinct form of non-helical region with a slight modification.