Developmentally regulated site-specific marker gene excision in transgenic <Emphasis Type="Italic">B. napus</Emphasis> plants

We have developed a self-excision Cre-vector to remove marker genes from Brassica napus. In this vector cre recombinase gene and bar expression cassette were inserted between two lox sites in direct orientation. These lox-flanked sequences were placed between the seed-specific napin promoter and the gene of interest (vstI). Tissue-specific cre activation resulted in simultaneous excision of the recombinase and marker genes. The vector was introduced into B. napus by Agrobacterium-mediated transformation. F1 progeny of seven lines with single and multiple transgene insertions was subjected to segregation and molecular analysis. Marker-free plants could be detected and confirmed by PCR and Southern blot in all transgenic lines tested. The recombination efficiency expressed as a ratio of plants with complete gene excision to the total number of investigated plants varied from 13 to 81% dependent on the transgene copy number. Potential application of this system would be the establishment of marker-free transgenic plants in generatively propagated species.     

Inducible Excision of Selectable Marker Gene from Transgenic Plants by the Cre/<Emphasis Type="Italic">lox</Emphasis> Site-specific Recombination System

In a plant transformation process, it is necessary to use marker genes that allow the selection of regenerated transgenic plants. However, selectable marker genes are generally superfluous once an intact transgenic plant has been established. Furthermore, they may cause regulatory difficulties for approving transgenic crop release and commercialization. We constructed a binary expression vector with the Cre/lox system with a view to eliminating a marker gene from transgenic plants conveniently. In the vector, recombinase gene cre under the control of heat shock promoter and selectable marker gene nptII under the control of CaMV35S promoter were placed between two lox P sites in direct orientation, while the gene of interest was inserted outside of the lox P sites. By using this vector, both cre and nptII genes were eliminated from most of the regenerated plants of primary transformed tobacco through heat shock treatment, while the gene of interest was retained and stably inherited. This autoexcision strategy, mediated by the Cre/lox system and subjected to heat shock treatment to eliminate a selectable marker gene, is easy to adopt and provides a promising approach to generate marker-free transgenic plants.     

Cre/<Emphasis Type="Italic">lox</Emphasis>-mediated marker gene excision in transgenic maize (Zea mays L.) plants

After the initial transformation and tissue culture process is complete, selectable marker genes, which are used in virtually all transformation approaches, are not required for the expression of the gene of interest in the transgenic plants. There are several advantages to removing the selectable marker gene after it is no longer needed, such as enabling the reuse of selectable markers and simplifying transgene arrays. We have tested the Cre/lox system from bacteriophage P1 for its ability to precisely excise stably integrated marker genes from chromosomes in transgenic maize plants. Two strategies, crossing and autoexcision, have been tested and demonstrated. In the crossing strategy, plants expressing the Cre recombinase are crossed with plants bearing a transgene construct in which the selectable marker gene is flanked by directly repeated lox sites. Unlike previous reports in which incomplete somatic and germline excision were common, in our experiments complete somatic and germline marker gene excision occurred in the F₁ plants from most crosses with multiple independent Cre and lox lines. In the autoexcision strategy, the cre gene, under the control of a heat shock-inducible promoter, is excised along with the nptII marker gene. Our results show that a transient heat shock treatment of primary transgenic callus is sufficient for inducing cre and excising the cre and nptII genes. Genetic segregation and molecular analysis confirmed that marker gene removal is precise, complete and stable. The autoexcision strategy provides a way of removing the selectable marker gene from callus or other tissues such as embryos and kernels.Communicated by D. Hoisington     

Feasibility of the seed specific cruciferin C promoter in the self excision Cre/<Emphasis Type="Italic">lox</Emphasis>P strategy focused on generation of marker-free transgenic plants

This work is focused on the generation of selectable marker-free transgenic tobacco plants using the self excision Cre/loxP system that is controlled by a strong seed specific Arabidopsis cruciferin C (CRUC) promoter. It involves Agrobacterium-mediated transformation using a binary vector containing the gus reporter gene and one pair of the loxP sites flanking the cre recombinase and selectable nptII marker genes (floxed DNA). Surprisingly, an ectopic activation of CRUC resulting in partial excision of floxed DNA was observed during regeneration of transformed cells already in calli. The regenerated T₀ plants were chimeric, but no ongoing ectopic expression was observed in these one-year-long invitro maintained plants. The process of the nptII removal was expected in the seeds; however, none of the analysed T₀ transgenic lines generated whole progeny sensitive to kanamycin. Detailed analyses of progeny of selected T₀-30 line showed that 10.2% GUS positive plants had completely removed nptII gene while the remaining 86.4% were still chimeras. Repeated activation of the cre gene in T₂ seeds resulted in increased rate of marker-free plants, whereas four out of ten analysed chimeric T₁ plants generated completely marker-free progenies. This work points out the feasibility as well as limits of the CRUC promoter in the Cre/loxP strategy. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Heat-inducible Cre-<Emphasis Type="Italic">lox</Emphasis> system for marker excision in transgenic rice

The present study assessed the efficacy of a heat-inducible cre gene for conditional removal of the marker gene from a rice genome via Cre-lox recombination. A cre gene controlled by the soybean heat-shock promoter was introduced into the rice genome along with the recombination target (lox) construct. Cre-mediated recombination was expected to remove the marker gene and activate the promoter-less GUS gene. Six transgenic lines displayed well-regulated heat-inducible Cre activity in the callus. However, only one line that contained a single copy of the cre gene maintained this property in the regenerated plants and their progeny. Marker-free progeny were obtained from the plant that was heat-treated at the seedling stage, indicating the inheritance of the recombination ‘footprint’. The presence of the ‘footprint’ was verified by polymerase chain reaction and Southern analysis. Therefore, the cre gene controlled by the soybean heat-shock promoter is an effective tool for conditional removal of the marker gene in rice.     

Agrobacterium-mediated transformation of maize (Zea mays) with Cre-lox site specific recombination cassettes in BIBAC vectors

The Cre/loxP site-specific recombination system has been applied in various plant species including maize (Zea mays) for marker gene removal, gene targeting, and functional genomics. A BIBAC vector system was adapted for maize transformation with a large fragment of genetic material including a herbicide resistance marker gene, a 30 kb yeast genomic fragment as a marker for fluorescence in situ hybridization (FISH), and a 35S-lox-cre recombination cassette. Seventy-five transgenic lines were generated from Agrobacterium-mediated transformation of a maize Hi II line with multiple B chromosomes. Eighty-four inserts have been localized among all 10 A chromosome pairs by FISH using the yeast DNA probe together with a karyotyping cocktail. No inserts were found on the B chromosomes; thus a bias against the B chromosomes by the Agrobacterium-mediated transformation was revealed. The expression of a cre gene was confirmed in 68 of the 75 transgenic lines by a reporter construct for cre/lox mediated recombination. The placement of the cre/lox site-specific recombination system in many locations in the maize genome will be valuable materials for gene targeting and chromosome engineering.     

Site-specific integration of DNA into wild-type and mutant lox sites placed in the plant genome

The bacteriophage P1 Cre—lox site-specific recombination system has been used to integrate DNA specifically at lox sites previously placed in the tobacco genome. As integrated molecules flanked by wild-type lox sites can readily excise in the presence of Cre recombinase, screening for mutant lox sites that can resist excisional recombination was performed. In gene integration experiments, wild-type and mutant lox sites were used in conjunction with two strategies for abolishing post-integration Cre activity: (i) promoter displacement of a cre-expression construct present in the target genome; and (ii) transient expression of cre. When the promoter displacement strategy was used, integrant plants were recovered after transformation with constructs containing mutant lox sequences, but not with constructs containing wild-type lox sites. When cre was transiently expressed, integrant plants were obtained after transformation with either mutant or wild-type lox sites. DNA rearrangements at the target locus were less frequent when mutant lox sites were used. DNA integration at the genomic lox site was usually without additional insertions in the genome. Thus, the Cre—lox site-specific recombination system is useful for the single-copy integration of DNA into a chromosomal lox site.     

Removal of the Selectable Marker Gene from Transgenic Tobacco Plants by Expression of Cre Recombinase from a Tobacco Mosaic Virus Vector through Agroinfection

Selection markers are often indispensable during the process of plant transformation, but dispensable once transgenic plants have been established. The Cre/lox site-specific recombination system has been employed to eliminate selectable marker genes from transgenic plants. Here we describe the use of a movement function-improved Tobacco Mosaic Virus (TMV) vector, m30B, to express Cre recombinase for elimination of the selectable marker gene nptII from transgenic tobacco plants. The transgenic tobacco plants were produced by Agrobacterium-mediated transformation with a specially designed binary vector pGNG which contained in its T-DNA region a sequence complex of 35S promoter-lox-the gfp coding sequence-rbcS terminator-Nos promoter-nptII-Nos terminator-lox-the gus coding region-Nos terminator. The expression of the recombinant viral vector m30B:Cre in plant cells was achieved by placing the viral vector under the control of the 35S promoter and through agroinoculation. After co-cultivating the pGNG-leaf discs with agro35S-m30B:Cre followed by shoot regeneration without any selection, plants devoid of the lox-flanked sequences including nptII were obtained with an efficiency of about 34% as revealed by histochemical GUS assay of the regenerants. Three of 11 GUS expressing regenerants, derived from two independent transgenic lines containing single copy of the pGNG T-DNA, proved to be free of the lox-flanked sequences by Southern blot analysis. Excision of the lox-flanked sequences in the three plants could be attributed to transient expression of Cre from the viral vector at the early stage of co-cultivation, since the cre sequence could not be detected in the viral RNA molecules accumulated in the plants, nor in their genomic DNA. The parental marker-free genotype was inherited in their selfed progeny, and all of the progeny were virus-free, apparently because TMV is not seed-transmissible. Therefore, expression of Cre from a TMV-based vector could be used to eliminate selectable marker genes from transgenic tobacco plants without sexual crossing and segregation, and this strategy could be extended to other TMV-infected plant species and applicable to other compatible virus–host plant systems.     

Cre/ lox site-specific recombination controls the excision of a transgene from the rice genome

The Cre/lox site-specific recombination controls the excision of a target DNA segment by recombination between two lox sites flanking it, mediated by the Cre recombinase. We have studied the functional expression of the Cre/lox system to excise a transgene from the rice genome. We developed transgenic plants carrying the target gene, hygromycin phosphotransferase (hpt) flanked by two lox sites and transgenic plants harboring the Cre gene. Each lox plant was crossed with each Cre plant reciprocally. In the Cre/lox hybrid plants, the Cre recombinase mediates recombination between two lox sites, resulting in excision of the hpt gene. The recombination event could be detected because it places the CaMV 35S promoter of the hpt gene adjacent to a promoterless gusA gene; as a result the gusA gene is activated and its expression could be visualized. In 73 Cre/lox hybrid plants from various crosses of T0 transgenic plants, 19 expressed GUS, and in 132 Cre/lox hybrid plants from crosses of T2 transgenic plants, 77 showed GUS expression. Molecular data proved the excision event occurred in all the GUS⁺ plants. Recombination occurred with high efficiency at the early germinal stage, or randomly during somatic development stages. Received. 2 April 2001 / Accepted: 29 June 2001     

Application of Arabidopsis tissue-specific CRUC promoter in the Cre/loxP self-excision strategy for generation of marker-free oilseed rape: potential advantages and drawbacks

The aim of the present study was to explore the usability of Arabidopsis cruciferin C (CRUC) promoter in the Cre/loxP self-excision strategy with the minimal rate of an ectopic expression of the cre recombinase. For this, a plant transformation vector containing the gus reporter gene driven by the light-sensitive Lhca3.St1 instead of double dCaMV 35S promoter and one pair loxP sites flanking the cre and the nptII genes was prepared. Agrobacterium-mediated transformations of three economically important oilseed rape (Brassica napus L.) cultivars Campino, Hunter and Topas as well as tobacco (Nicotiana tabacum L.) as a reference system were performed. The integration of the T-DNA into genome of all Brassica cultivars was accompanied by DNA deletions/rearrangements on the both T-DNA ends. The disruption of the Cre/loxP recombination system in oilseed rape was observed. On the contrary, no such events were detected in tobacco. The applied strategy did restrict an ectopic CRUC activity to some extent and a set of transgenic tobacco T₀ plants without premature excision event was obtained. Our data showed that a choice of the promoter can limit undesired activation of the Cre/loxP cassette.     

Rare instances of Cre-mediated deletion product maintained in transgenic wheat

Previously, we described a Cre-lox based strategy to convert a complex multi-copy integration pattern to a single-copy transgene (Srivastava et al., 1999). When a lox-containing transgenic line of wheat was crossed with a cre-expressing line, extra copies of the transgene were deleted by site-specific recombination. This process included the removal of a lox-flanked selection marker gene, bar. Three out of six F₁ plants were chimeric for the resolved and the complex loci because both completely resolved and incompletely resolved patterns were found in the F₂ population. From one F₁ plant, 4 out of 20 F₂ progeny showed not only incomplete resolution of the complex integration pattern, but also the presence of a circular loxP-bar-nos3 fragment, which we refer to as the bar circle. This bar circle was detected in subsequent generations, and was associated with the presence of both the lox transgene and the cre locus. We hypothesize that the cre gene in these bar circle plants must have undergone a genetic or epigenetic change that altered the spatial and/or temporal pattern of cre expression. Late expression might excise the DNA incompletely, and late in development. What is surprising is that the DNA is not degraded, but remains in the cells as an extra-chromosomal circular molecule.     

Agroinfiltration as a Tool for Transient Expression of <Emphasis Type="Italic">cre</Emphasis> Recombinase <Emphasis Type="Italic">in vivo</Emphasis>

Agroinfiltration was used to express transiently cre recombinase from bacteriophage P1 in planta. Activation of gfp expression after cre-mediated excision of a bar intervening sequence served as a marker to monitor site-specific recombination events in lox-target N. benthamiana plants. Gfp expressing regenerants from A. tumefaciens infiltrated leaves were obtained with an efficiency of about 34%. In 20% of the regenerants bar gene excision was due to the expression of stably integrated cre gene, whereas in 14% of plants site-specific recombination was a consequence of transient cre expression. Phenotypic and molecular data indicated that the recombined state has been transferred to the T₁ generation. These results demonstrate the suitability of agroinfiltration for the expression of cre recombinase in vivo.     

Salicylic-Acid-Induced Self-excision of the Marker Gene <Emphasis Type="Italic">npt</Emphasis>II from Transgenic Tomato Using the Cre–<Emphasis Type="Italic">loxP</Emphasis> System

The presence of antibiotic-resistant genes in genetically engineered crops together with the target gene has generated a number of environmental and consumer concerns. In order to alleviate public concerns over the safety of food derived from transgenic crops, marker gene elimination is desirable. Marker-free transgenic tomato plants were obtained by using a salicylic-acid-regulated Cre–loxP-mediated site-specific DNA recombination system in which the selectable marker neomycin phosphotransferase nptII and cre genes were flanked by two directly oriented loxP sites. Upon induction by salicylic acid, the cre gene produced a recombinase that eliminated sequences encoding nptII and cre genes, sandwiched by two loxP sites from the tomato genome. Regenerant plants with the Cre–loxP system were obtained by selection on kanamycin media and polymerase chain reaction (PCR) screening. Transgenic plants were screened for excision by PCR using nptII, cre, and PR-1a promoter primers following treatment with salicylic acid. The footprint of the excision was determined by sequencing the T-DNA borders after a perfect recombination event. The excision efficiency was 38.7%. A new plant transformation vector, pBLNSC (Genbank accession number EU327497), was developed, containing six cloning sites and the self-excision system. This provided an effective approach to eliminate the selectable marker gene from transgenic tomato, thus expediting public acceptance of genetically modified tomato.     

Excision of a selectable marker gene in transgenic banana using a Cre/lox system controlled by an embryo specific promoter

Antibiotic and herbicide resistance genes have been used in transgene technology as powerful selection tools. Nonetheless, once transgenic events have been obtained their presence is no longer needed and can even be undesirable. In this work, we have developed a system to excise the selectable marker and the cre recombinase genes from transgenic banana cv. ‘Grande Naine’ (Musa AAA). To achieve this, the embryo specific REG-2 promoter was isolated from rice and its expression pattern in banana cell clumps, somatic embryos and regenerated plantlets was characterized by using a pREG2::uidA fusion construct. Subsequently, the REG-2 promoter was placed upstream of the cre gene, conferring Cre functionality in somatic embryos and recombination of lox sites resulting in excision of the selectable marker and cre genes. PCR analysis revealed that 41.7 % of the analysed transgenic plants were completely marker free, results that were thereafter confirmed by Southern blot hybridization. These results demonstrate the feasibility of using developmentally controlled promoters to mediate marker excision in banana. This system does not require any extra handling compared to the conventional transformation procedure and might be useful in other species regenerating through somatic embryogenesis.     

Manipulation of the napin primary structure alters its packaging and deposition in transgenic tobacco (Nicotiana tabacum L.) seeds

Napin is a 2S storage protein found in the seeds of oilseed rape (Brassica napus L.) and related species. Using protein structural prediction programs we have identified a region in the napin protein sequence which forms a `hydrophilic loop' composed of amino acid residues located at the protein surface. Targeting this region, we have constructed two napin chimeric genes containing the coding sequence for the peptide hormone leucine-enkephalin as a topological marker. One version has a single enkephalin sequence of 11 amino acids including linkers and the second contains a tandem repeat of this peptide comprising 22 amino acids, inserted into the napin large subunit. The inserted peptide sequences alter the balance of hydrophilic to hydrophobic amino acids and introduce flexibility into this region of the polypeptide chain. The chimeric genes have been expressed in tobacco plants under the control of the seed-specific napA gene promoter. Analyses indicate that the engineered napin proteins are expressed, transported, post-translationally modified and deposited inside the protein bodies of the transgenic seeds demonstrating that the altered napin proteins behave in a similar fashion to the authentic napin protein. Detailed immunolocalisation studies indicate that the insertion of the peptide sequences has a significant effect on the distribution of the napin proteins within the tobacco seed protein bodies.     

Directed excision of a transgene from the plant genome

Summary The effectiveness of loxP-Cre directed excision of a transgene was examined using phenotypic and molecular analyses. Two methods of combining the elements of this system, re-transformation and cross pollination, were found to produce different degrees of excision in the resulting plants. Two linked traits, -glucuronidase (GUS) and a gene encoding sulfonylurea-resistant acetolactate synthase (ALS^r), were integrated into the genome of tobacco and Arabidopsis. The ALS^r gene, bounded by loxP sites, was used as the selectable marker for transformation. The directed loss of the ALS^T gene through Cre-mediated excision was demonstrated by the loss of resistance to sulfonylurea herbicides and by Southern blot analysis. The -glucuronidase gene remained active. The excision efficiency varied in F₁ progeny of different lox and Cre parents and was correlated with the Cre parent. Many of the lox × Cre F₁ progeny were chimeric and some F₂ progeny retained resistance to sulfonylureas. Re-transformation of lox/ALS/lox/GUS tobacco plants with cre led to much higher efficiency of excision. Lines of tobacco transformants carrying the GUS gene but producing only sulfonylurea-sensitive progeny were obtained using both approaches for introducing cre. Similarly, Arabidopsis lines with GUS activity but no sulfonylurea resistance were generated using cross pollinations.     

Plastid marker gene excision by the phiC31 phage site-specific recombinase

Marker genes are essential for selective amplification of rare transformed plastid genome copies to obtain genetically stable transplastomic plants. However, the marker gene becomes dispensable when homoplastomic plants are obtained. Here we report excision of plastid marker genes by the phiC31 phage site-specific integrase (Int) that mediates recombination between bacterial (attB) and phage (attP) attachment sites. We tested marker gene excision in a two-step process. First we transformed the tobacco plastid genome with the pCK2 vector in which the spectinomycin resistance (aadA) marker gene is flanked with suitably oriented attB and attP sites. The transformed plastid genomes were stable in the absence of Int. We then transformed the nucleus with a gene encoding a plastid-targeted Int that led to efficient marker gene excision. The aadA marker free Nt-pCK2-Int plants were resistant to phosphinothricin herbicides since the pCK2 plastid vector also carried a bar herbicide resistance gene that, due to the choice of its promoter, causes a yellowish-golden (aurea) phenotype. Int-mediated marker excision reported here is an alternative to the currently used CRE/loxP plastid marker excision system and expands the repertoire of the tools available for the manipulation of the plastid genome.     

A Self-Excising Cre Recombinase Allows Efficient Recombination of Multiple Ectopic Heterospecific Lox Sites in Transgenic Tobacco

To study the impact of different DNA configurations on the stability of transgene expression, a variant of the cre gene was developed. This variant allows for the highly efficient in planta removal of its own loxP-flanked coding sequence as well as other DNAs flanked by ectopic heterospecific lox sites, either lox511 or lox2272 or both, in trans. The plant intron-containing cre gene, cre ^INT , was configured in such a way that self-excision generated an intact hygromycin resistance selectable marker gene. In this combination, all selected transformants showed highly efficient excision. Plants obtained showed no indication of any chimerism, indicating a cell autonomous nature of the hygromycin selection during transformation and regeneration. The highly efficient concomitant removal of wildtype and heterospecific lox site-flanked DNA demonstrated that upon retransformation with the self-excising cre ^INT , sufficient amounts of Cre enzyme were produced prior to its removal. Plants obtained with cre ^INT showed much less frequently the Cre-associated phenomenon of reduced fertility than plants obtained with a continuous presence of Cre recombinase. The cre ^INT system has therefore advantages over systems with a continuously present Cre. The cre ^INT system was successfully used for removal of two chromatin boundary elements from transgene cassettes in tobacco. Analysis of plants with and without boundary elements on the same chromosomal location will contribute to a better evaluation of the role of such elements in the regulation of transgene expression in plants.     

Generation of marker‐free transgenic hexaploid wheat via an Agrobacterium‐mediated co‐transformation strategy in commercial Chinese wheat varieties

Genotype specificity is a big problem lagging the development of efficient hexaploid wheat transformation system. Increasingly, the biosecurity of genetically modified organisms is garnering public attention, so the generation of marker‐free transgenic plants is very important to the eventual potential commercial release of transgenic wheat. In this study, 15 commercial Chinese hexaploid wheat varieties were successfully transformed via an Agrobacterium‐mediated method, with efficiency of up to 37.7%, as confirmed by the use of Quickstix strips, histochemical staining, PCR analysis and Southern blotting. Of particular interest, marker‐free transgenic wheat plants from various commercial Chinese varieties and their F₁ hybrids were successfully obtained for the first time, with a frequency of 4.3%, using a plasmid harbouring two independent T‐DNA regions. The average co‐integration frequency of the gus and the bar genes located on the two independent T‐DNA regions was 49.0% in T₀ plants. We further found that the efficiency of generating marker‐free plants was related to the number of bar gene copies integrated in the genome. Marker‐free transgenic wheat plants were identified in the progeny of three transgenic lines that had only one or two bar gene copies. Moreover, silencing of the bar gene was detected in 30.7% of T₁ positive plants, but the gus gene was never found to be silenced in T₁ plants. Bisulphite genomic sequencing suggested that DNA methylation in the 35S promoter of the bar gene regulatory region might be the main reason for bar gene silencing in the transgenic plants.