The neutral posture of the cervical spine is not unique in human subjects

Cervical spine injuries often happen in dynamic environments (e.g., sports and motor vehicle crashes) where individuals may be moving their head and neck immediately prior to impact. This motion may reposition the cervical vertebrae in a way that is dissimilar to the upright resting posture that is often used as the initial position in cadaveric studies of catastrophic neck injury. Therefore our aim was to compare the “neutral” cervical alignment measured using fluoroscopy of 11 human subjects while resting in a neutral posture and as their neck passed through neutral during the four combinations of active flexion and extension movements in both an upright and inverted posture. Muscle activation patterns were also measured unilaterally using surface and indwelling electromyography in 8 muscles and then compared between the different conditions. Overall, the head posture, cervical spine alignment and muscle activation levels were significantly different while moving compared to resting upright. Compared to the resting upright condition, average head postures were 6–13° more extended, average vertebral angles varied from 11° more extended to 10° more flexed, and average muscle activation levels varied from unchanged to 10% MVC more active, although the exact differences varied with both direction of motion and orientation. These findings are important for ex vivo testing where the head and neck are statically positioned prior to impact – often in an upright neutral posture with negligible muscle forces – and suggest that current cadaveric head-first impact tests may not reflect many dynamic injury environments.     

The effect of static neck flexion on mechanical and neuromuscular behaviors of the cervical spine

Occupations that involve sustained or repetitive neck flexion are associated with a higher incidence of neck pain. Little in vivo information is available on the impact of static neck flexion on cervical spinal tissue. The aim of this study was to assess changes in mechanical and neuromuscular behaviors to sustained neck flexion in healthy adults. Sixty healthy subjects aged 20–35 years participated in this study. The participants were exposed to static neck flexion at a fixed angle of full flexion for 10 min. Mechanical and neuromuscular responses of the cervical spine to sudden perturbations were measured pre- and post-exposure. Magnitude of load-relaxation during flexion exposure, stiffness, peak head angular velocity, and reflexive activities of cervical muscles were recorded. Effective neck stiffness decreased significantly, especially in female participants (P = 0.0001). The reflexive response of the cervical erector spinae muscles to head perturbation delayed significantly (P = 0.0001). Peak head angular velocity was significantly increased after exposure to neck flexion for 10 min, especially in female participants (P = 0.001). In the present study, static flexion resulted in changes in mechanical and neuromuscular behavior of the cervical spine, potentially leading to decreased stiffness of the cervical spine. The results confirm the importance of maintaining a correct head and neck position during work and improving the work environment to reduce the cervical spinal load and work-related neck pain.     

Effect of sitting postures and shoulder position on the cervicocephalic kinesthesia in healthy young males

Information about head orientation, position, and movement with respect to the trunk relies on the visual, vestibular, extensive muscular, and articular proprioceptive system of the neck. Various factors can affect proprioception since it is the function of afferent integration, and tuning of muscular and articular receptors. Pain, muscle fatigue, and joint position have been shown to affect proprioceptive capacity. Thus, it can be speculated that changes in body posture can alter the neck proprioception. This study was undertaken to investigate the effect of body posture on cervicocephalic kinesthetic sense in healthy subjects. Cervicocephalic kinesthetic sensibility was measured by the kinesthetic sensibility test in healthy young adults while in (a) habitual slouched sitting position with arms hanging by the side (SS), (b) habitual slouched sitting position with arms unloaded (supported) (SS-AS), and (c) upright sitting position with arms hanging by the side (US) during maximum and 30 degree right, left rotations, flexion, and extension. Thirty healthy male adults (mean age 27.83; SD 3.41) volunteered for this study. The least mean error was found for the SS-AS position (0.48; SD 0.24), followed by SS (0.60; SD 0.43) and US (0.96; SD 0.71), respectively. For all test conditions, there was significant difference in mean absolute error while head repositioning from maximum and 30 degree rotation during SS and SS-AS positions (p?相似文献   

Kinetics of the cervical spine in pediatric and adult volunteers during low speed frontal impacts

Previous research has quantified differences in head and spinal kinematics between children and adults restrained in an automotive-like configuration subjected to low speed dynamic loading. The forces and moments that the cervical spine imposes on the head contribute directly to these age-based kinematic variations. To provide further explanation of the kinematic results, this study compared the upper neck kinetics - including the relative contribution of shear and tension as well as flexion moment - between children (n=20, 6-14 yr) and adults (n=10, 18-30 yr) during low-speed (<4 g, 2.5 m/s) frontal sled tests. The subjects were restrained by a lap and shoulder belt and photo-reflective targets were attached to skeletal landmarks on the head, spine, shoulders, sternum, and legs. A 3D infrared tracking system quantified the position of the targets. Shear force (F(x)), axial force (F(z)), bending moment (M(y)), and head angular acceleration (θ(head)) were computed using inverse dynamics. The method was validated against ATD measured loads. Peak F(z) and θ(head) significantly decreased with increasing age while M(y) significantly increased with increasing age. F(x) significantly increased with age when age was considered as a univariate variable; however when variations in head-to-neck girth ratio and change in velocity were accounted for, this difference as a function of age was not significant. These results provide insight into the relationship between age-based differences in head kinematics and the kinetics of the cervical spine. Such information is valuable for pediatric cervical spine models and when scaling adult-based upper cervical spine tolerance and injury metrics to children.     

Investigation of whiplash injuries in the upper cervical spine using a detailed neck model

Whiplash injuries continue to have significant societal cost; however, the mechanism and location of whiplash injury is still under investigation. Recently, the upper cervical spine ligaments, particularly the alar ligament, have been identified as a potential whiplash injury location. In this study, a detailed and validated explicit finite element model of a 50th percentile male cervical spine in a seated posture was used to investigate upper cervical spine response and the potential for whiplash injury resulting from vehicle crash scenarios. This model was previously validated at the segment and whole spine levels for both kinematics and soft tissue strains in frontal and rear impact scenarios. The model predicted increasing upper cervical spine ligament strain with increasing impact severity. Considering all upper cervical spine ligaments, the distractions in the apical and alar ligaments were the largest relative to their failure strains, in agreement with the clinical findings. The model predicted the potential for injury to the apical ligament for 15.2 g frontal or 11.7 g rear impacts, and to the alar ligament for a 20.7 g frontal or 14.4 g rear impact based on the ligament distractions. Future studies should consider the effect of initial occupant position on ligament distraction.     

Bridging the gap between temporomandibular disorders,static balance impairment and cervicogenic dizziness: Posturographic and clinical outcomes

Several studies have investigated the possible influence of temporomandibular disorders (TMD) on body posture and whether cervical spine disorders, such as cervicogenic dizziness (CGD) could play an additional role in affecting static balance. The purpose of this study was to analyze static postural behavior by means of static posturography, in patients affected by either TMD or CGD alone or by both conditions, and to compare findings with a group of healthy subjects. Significant changes in posturographic parameters were found among the three groups of patients and when compared with controls. When the three study groups were compared to each other, subjects affected by a combination of TMD and CGD showed worse postural performances with respect to subjects affected by CGD or TMD alone. Correlations with self-perceived dizziness, anxiety, depression and jaw functionality, investigated by means of validated questionnaires, were found among all patient groups. These results provide new evidences for the presence of static balance alterations in patients suffering from TMD with and without associated cervical spine impairment, by using a reliable diagnostic technique. Further studies are needed in order to identify any causal relation between these two disorders.     

Comparison of the anatomical morphology of cervical vertebrae between humans and macaques: related to a spinal cord injury model

Non-human primates are most suitable for generating cervical experimental models, and it is necessary to study the anatomy of the cervical spine in non-human primates when generating the models. The purpose of this study was to provide the anatomical parameters of the cervical spine and spinal cord in long-tailed macaques (Macaca fascicularis) as a basis for cervical spine-related experimental studies. Cervical spine specimens from 8 male adult subjects were scanned by micro-computed tomography, and an additional 10 live male subjects were scanned by magnetic resonance imaging. The measurements and parameters from them were compared to those of 12 male adult human subjects. Additionally, 10 live male subjects were scanned by magnetic resonance imaging, and the width and depth of the spinal cord and spinal canal and the thickness of the anterior and posterior cerebrospinal fluid were measured and compared to the relevant parameters of 10 male adult human subjects. The tendency of cervical parameters to change with segmental changes was similar between species. The vertebral body, spinal canal, and spinal cord were significantly flatter in the human subjects than in the long-tailed macaques. The cerebrospinal fluid space in the long-tailed macaques was smaller than that in the human subjects. The anatomical features of the cervical vertebrae of long-tailed macaques provide a reference for establishing a preclinical model of cervical spinal cord injury.     

Epidemiology and Risk Factors of Cervical Spine Injury during Heating Season in the Patients with Cervical Trauma: A Cross-Sectional Study

Purpose

The purpose of this study was to describe the epidemiology of cervical spine injury in the patients with cervical trauma and analyze its associated risk factors during the special heating season in North China.

Methods

This cross-sectional study investigated predictors for cervical spine injury in cervical trauma patients using retrospectively collected data of Hebei Provincial Orthopaedic Hospital from 11/2011 to 02/2012, and 11/2012 to 02/2013. Binary logistic regression analysis was used to determine risk factors for cervical fractures/dislocations or cord injury.

Results

A total of 106 patients were admitted into this study. Of all, 34 patients (32.1%) were treated from 11/2011 to 02/2012 and 72 patients (67.9%) from 11/2012 to 02/2013. The mean age was 41.9±13.3 years old; 85 patients (80.2%) were male and 82 (77.4%) from rural areas. Eighty patients (75.5%) were caused by fall including 45 (42.5%) by severe fall (>2 m). Sixty-five patients (61.3%) of all suffered injuries to other body regions and 32 (30.2%) got head injury. Thirty-one patients (29.2%) sustained cervical cord injury with cervical fractures/dislocations. Twenty-six (83.9%) of cervical cord injury patients were from rural areas and 24 (77.4%) of those resulted from fall including 15 (48.4%) from severe fall (>2 m). Logistic regression displayed that age (OR, 1.47; 95% CI, 1.05–2.07), head injury (OR, 5.63; 95% CI, 2.23–14.26), were risk factors for cervical cord injury and snowing (OR, 8.25; 95% CI, 2.26–30.15) was a risk factor for cervical spine injury due to severe fall (>2 m).

Conclusions

The elder male patients and patients with head trauma are high-risk population for cervical cord injury. As a seasonal factor, snowing during heating season is of note a risk factor for cervical spine injury resulting from severe fall (>2 m) in the patients with cervical trauma in North China.     

Injury biomechanics research: an essential element in the prevention of trauma

The central aspects of injury biomechanics research are defined and research approaches described. These aspects include the identification and definition of impact injury mechanisms, the quantification of biomechanical response to impact, the determination of impact tolerance levels, and the development and use of injury assessment devices and techniques for evaluating injury prevention systems. The current status of knowledge and technology is then reviewed for the head, cervical spine, thorax, abdomen, and lower extremity. Important gaps are identified, and research priorities emphasizing functional impairment are proposed.     

Finite element model of the human neck during omni-directional impacts. Part II: relation between cervical curvature and risk of injury

A detailed 3D FE model of the human neck was used to assess a possible relationship between risk of injury and cervical spine curvature for various impacts. A FE model was previously developed, representing the head and neck of a 50th percentile human with a normal lordotic curvature. The model behaviour was omni-directionally validated for various impacts using published results. For the present study, the model was deformed in order to obtain a straight and a kyphotic curvature, and for each geometry, rear-end, frontal, lateral and oblique impact were simulated. Although results showed similar kinematic patterns, significant differences were found in the distribution and peak values of ligament elongations, forces and moments along the cervical spine for the three configurations. It was concluded that the variability observed on the curvature of the human cervical spine may have a significant influence both on the behaviour and on the risk of injury of the neck during impact.     

Finite element model of the human neck during omni-directional impacts. Part II: relation between cervical curvature and risk of injury

A detailed 3D FE model of the human neck was used to assess a possible relationship between risk of injury and cervical spine curvature for various impacts. A FE model was previously developed, representing the head and neck of a 50th percentile human with a normal lordotic curvature. The model behaviour was omni-directionally validated for various impacts using published results. For the present study, the model was deformed in order to obtain a straight and a kyphotic curvature, and for each geometry, rear-end, frontal, lateral and oblique impact were simulated. Although results showed similar kinematic patterns, significant differences were found in the distribution and peak values of ligament elongations, forces and moments along the cervical spine for the three configurations. It was concluded that the variability observed on the curvature of the human cervical spine may have a significant influence both on the behaviour and on the risk of injury of the neck during impact.     

Variations of stiffness and strength along the human cervical spine

The load-displacement response and strength of the mid (C2-C5) and lower (C5-T1) cervical regions were determined for combinations of sagittal loads, in vitro. In unpaired t-test comparisons, the mid cervical region was significantly stiffer in compression and extension than the lower region. In tests to failure, failure in six out of seven mid cervical specimens resulted from flexion alone, while combined compression-flexion was required to fail five of the eight lower cervical specimens. Post-test dissections revealed no regional differences in the pattern of failure. In addition to sagittal tests, the load-displacement responses of three-vertebrae cervical specimens were measured with the upper body axially rotated with respect to the lower body. The effect of this pre-torsion was to diminish the zone of low slope near zero load for axial, shear, and flexion motion. Three of the four axially rotated specimens failed in flexion without added compression. These controlled load-displacement measurements of cervical spine specimens describe for the first time the continuous flexion-compression response up to failure, and suggest that consideration of the biomechanics of three apparently distinct mobile regions of the cervical spine (C1-C2, C2-C5, C5-T1) may facilitate the interpretation of hazardous conditions and the diagnosis of injury. These data also provide basic information for the in vitro investigation of passive cervical spine protection such as helmets and head-rests, suggesting that the head should be kept in a non-rotated position to reduce risk of injury.     

A biomechanical evaluation of whiplash using a multi-body dynamic model

This paper presents a biomechanical evaluation of whiplash injury potential during the initial extension motion of the head in a rear-end collision. A four-segment dynamic model is developed in the sagittal plane for the analysis. The model response is validated using the existing experimental data and is shown to simulate the "S-shape" kinematics of the cervical spine and the resulting dynamics observed in human and cadaver experiments. The model is then used to evaluate the effects of parameters such as collision severity, head/headrest separation, and the initial head orientation in the sagittal plane on the "S-shape" kinematics of the cervical spine and the resulting neck loads. It is shown, for example, that the cervical spine forms an "S-shape" for a range of change in speeds and that at lower and higher speeds changes the spine does not form the "S-shape." Furthermore, it is shown that the "S-shape" formation also depends on the head to headrest separation distance.     

Sagittal plane kinematics of the adult hyoid bone

The hyoid bone is a unique bone in the skeleton not articulated to any other bone. The hyoid muscles, which attach to the hyoid bone, may play a role in neck mechanics, but analysis of their function requires quantifying hyoid bone mechanics. The goal of this study was to obtain the detailed kinematics of the hyoid bone over a large range of flexion-extension motion using radiographs at 5 postures. The position of the hyoid bone in the sagittal plane was characterized with respect to head, jaw, and vertebral movements. Sex differences in hyoid kinematics were also investigated. We hypothesized that (1) the position of the hyoid bone in the sagittal plane is linearly correlated with motion of the head, jaw, and vertebrae, and (2) the hyoid position, size, and kinematics are sex-specific. We found that the hyoid bone X, Y, and angular position generally had strong linear correlations with the positions of the head, jaw, and the cervical vertebrae C1-C4. Hyoid X and angular position was also correlated to C5. Sex differences were found in some regressions of the hyoid bone with respect to C1-C5. The angular and linear measurements of the hyoid bone showed sex differences in absolute values, which were not evident after normalization by posture or neck size. Incorporating these results to neck models would enable accurate modeling of the hyoid muscles. This may have implications for analyzing the mechanics of the cervical spine, including loads on neck structures and implants.     

Variation in emergency department use of cervical spine radiography for alert,stable trauma patients

OBJECTIVE: To, assess the emergency department use of cervical spine radiography for alert, stable adult trauma patients in terms of utilization, yield for injury and variation in practices among hospitals and physicians. DESIGN: Retrospective survey of health records. SETTING: Emergency departments of 6 teaching and 2 community hospitals in Ontario and British Columbia. PATIENTS: Consecutive alert, stable adult trauma patients seen with potential cervical spine injury between July 1, 1994, and June 30, 1995. MAIN OUTCOME MEASURES: Total number of eligible patients, referral for cervical spine radiography (overall, by hospital and by physician), presence of cervical spine injury, patient characteristics and hospitals associated with use of radiography. RESULTS: Of 6855 eligible patients, cervical spine radiography was ordered for 3979 (58.0%). Only 60 (0.9%) patients were found to have an acute cervical spine injury (fracture, dislocation or ligamentous instability); 98.5% of the radiographic films were negative for any significant abnormality. The demographic and clinical characteristics of the patients were similar across the 8 hospitals, and no cervical spine injuries were missed. Significant variation was found among the 8 hospitals in the rate of ordering radiography (p < 0.0001), from a low of 37.0% to a high of 72.5%. After possible differences in case severity and patient characteristics at each hospital were controlled for, logistic regression analysis revealed that 6 of the hospitals were significantly associated with the use of radiography. At 7 hospitals, there was significant variation in the rate of ordering radiography among the attending emergency physicians (p < 0.05), from a low of 15.6% to a high of 91.5%. CONCLUSIONS: Despite considerable variation among institutions and individual physicians in the ordering of cervical spine radiography for alert, stable trauma patients with similar characteristics, no cervical spine injuries were missed. The number of radiographic films showing signs of abnormality was extremely low at all hospitals. The findings suggest that cervical spine radiography could be used more efficiently, possibly with the help of a clinical decision rule.     

The influence of surface padding properties on head and neck injury risk

A validated computational head-neck model was used to understand the mechanical relationships between surface padding characteristics and injury risk during impacts near the head vertex. The study demonstrated that injury risk can be decreased by maximizing the energy-dissipating ability of the pad, choosing a pad stiffness that maximizes pad deformation without bottoming out, maximizing pad thickness, and minimizing surface friction. That increasing pad thickness protected the head without increasing neck loads suggests that the increased cervical spine injury incidence previously observed in cadaveric impacts to padded surfaces relative to lubricated rigid surfaces was due to increased surface friction rather than pocketing of the head in the pad.     

Finite element analysis of moment-rotation relationships for human cervical spine

A comprehensive, geometrically accurate, nonlinear C0-C7 FE model of head and cervical spine based on the actual geometry of a human cadaver specimen was developed. The motions of each cervical vertebral level under pure moment loading of 1.0 Nm applied incrementally on the skull to simulate the movements of the head and cervical spine under flexion, tension, axial rotation and lateral bending with the inferior surface of the C7 vertebral body fully constrained were analysed. The predicted range of motion (ROM) for each motion segment were computed and compared with published experimental data. The model predicted the nonlinear moment-rotation relationship of human cervical spine. Under the same loading magnitude, the model predicted the largest rotation in extension, followed by flexion and axial rotation, and least ROM in lateral bending. The upper cervical spines are more flexible than the lower cervical levels. The motions of the two uppermost motion segments account for half (or even higher) of the whole cervical spine motion under rotational loadings. The differences in the ROMs among the lower cervical spines (C3-C7) were relatively small. The FE predicted segmental motions effectively reflect the behavior of human cervical spine and were in agreement with the experimental data. The C0-C7 FE model offers potentials for biomedical and injury studies.     

Cervical helical axis characteristics and its center of rotation during active head and upper arm movements-comparisons of whiplash-associated disorders, non-specific neck pain and asymptomatic individuals

The helical axis model can be used to describe translation and rotation of spine segments. The aim of this study was to investigate the cervical helical axis and its center of rotation during fast head movements (side rotation and flexion/extension) and ball catching in patients with non-specific neck pain or pain due to whiplash injury as compared with matched controls. The aim was also to investigate correlations with neck pain intensity. A finite helical axis model with a time-varying window was used. The intersection point of the axis during different movement conditions was calculated. A repeated-measures ANOVA model was used to investigate the cervical helical axis and its rotation center for consecutive levels of 15 degrees during head movement. Irregularities in axis movement were derived using a zero-crossing approach. In addition, head, arm and upper body range of motion and velocity were observed. A general increase of axis irregularity that correlated to pain intensity was observed in the whiplash group. The rotation center was superiorly displaced in the non-specific neck pain group during side rotation, with the same tendency for the whiplash group. During ball catching, an anterior displacement (and a tendency to an inferior displacement) of the center of rotation and slower and more restricted upper body movements implied a changed movement strategy in neck pain patients, possibly as an attempt to stabilize the cervical spine during head movement.     

Intersex differences in craniocervical morphology and posture in southern Chinese and British Caucasians

The aim of this study was to compare intersex differences in the angular relationships of the head, the cervical column, and the true vertical in natural head posture (the "postural variables") for unselected samples of southern Chinese (n = 240) and British Caucasian (n = 80) 12-year-old children in Hong Kong. For both samples the cervical spine was angulated significantly more forwardly in the females (P less than or equal to 0.001) and the head held higher relative to the spine. Cervical lordosis was also greater in the females and the cervical column of greater relative length. Our findings are in agreement with comparable data previously reported for a northern Finnish population.     

Inter-individual variation in vertebral kinematics affects predictions of neck musculoskeletal models

Experimental studies have found significant variation in cervical intervertebral kinematics (IVK) among healthy subjects, but the effect of this variation on biomechanical properties, such as neck strength, has not been explored. The goal of this study was to quantify variation in model predictions of extension strength, flexion strength and gravitational demand (the ratio of gravitational load from the weight of the head to neck muscle extension strength), due to inter-subject variation in IVK. IVK were measured from sagittal radiographs of 24 subjects (14F, 10M) in five postures: maximal extension, mid-extension, neutral, mid-flexion, and maximal flexion. IVK were defined by the position (anterior-posterior and superior-inferior) of each cervical vertebra with respect to T1 and its angle with respect to horizontal, and fit with a cubic polynomial over the range of motion. The IVK of each subject were scaled and incorporated into musculoskeletal models to create models that were identical in muscle force- and moment-generating properties but had subject-specific kinematics. The effect of inter-subject variation in IVK was quantified using the coefficient of variation (COV), the ratio of the standard deviation to the mean. COV of extension strength ranged from 8% to 15% over the range of motion, but COV of flexion strength was 20–80%. Moreover, the COV of gravitational demand was 80–90%, because the gravitational demand is affected by head position as well as neck strength. These results indicate that including inter-individual variation in models is important for evaluating neck musculoskeletal biomechanical properties.