Characterization of enzymatic saccharification for acid-pretreated lignocellulosic materials with different lignin composition

The enzymatic saccharification of three different feedstocks, rice straw, bagasse and silvergrass, which had been pretreated with different dilute acid concentrations, was studied to verify how enzymatic saccharification was affected by the lignin composition of the raw materials. There was a quantitatively inverse correlation between lignin content and enzymatic digestibility after pretreatment with 1%, 2% and 4% sulfuric acid. The lignin accounted for about 18.8–21.8% of pretreated rice straw, which was less than the 23.1–26.5% of pretreated bagasse and the 21.5–24.1% of pretreated silvergrass. The maximum glucose yield achieved, under an enzyme loading 6.5 FPU g^?1 DM for 72 h, was close to 0.8 g glucose/g glucan from the enzymatic hydrolysis of the pretreated rice straw; this was twice that from bagasse and silvergrass. A decrease in initial rate of glucose production was observed in all cases when the raw materials underwent enzymatic saccharification with 4% sulfuric acid pretreatment. It is suggested that the higher acid concentration led to an inhibition of β-glucosidase activity. Fourier transform infrared (FTIR) spectroscopy further indicated the chemical properties of the rice straw and silvergrass become more hydrophilic after pretreatment using 2% of sulfuric acid, but the pretreated bagasse tended to become more hydrophobic. The hydrophilic nature of the pretreated solid residues may increase the inhibitive effects of lignin on the cellulase and this could become very important for raw materials such as silvergrass that contain more lignin.     

Enhanced enzymatic hydrolysis of triploid poplar following stepwise acidic pretreatment and alkaline fractionation

In this study, we employed stepwise dilute sulfuric acid-catalyzed hydrothermal pretreatment and alkaline fractionation to enhance digestion of triploid poplar for bioconversion. Samples of triploid poplar were subjected to a pretreatment with 0.5% sulfuric acid at different temperatures and then to fractionation with 70% aqueous ethanol solution containing 1.5% NaOH. The results indicated that the stepwise pretreatment process degraded hemicelluloses, incurring slightly increase in crystallinity of cellulosic residues. Lignin was concentrated during acidic pretreatment and negatively affected the interaction between enzyme and cellulose. As the pretreatment temperature increased to 200 °C, the cellulose was degraded and exhibited lower crystallinity. The removal of polysaccharides and lignin resulted in mass loss and considerable feedstock recoveries were achieved at the temperatures below 130 °C. The results obtained from enzymatic hydrolysis suggested that the stepwise pretreatment enhanced the digestibility of the cellulosic residues. The optimum pretreatment temperature was observed at 120 °C. In this case 60.3% lignocellulose was recovered and achieved 69.4% of cellulose-to-glucose in enzyme-mediate conversion.     

A novel mechanism and kinetic model to explain enhanced xylose yields from dilute sulfuric acid compared to hydrothermal pretreatment of corn stover

Pretreatment of corn stover in 0.5% sulfuric acid at 160 °C for 40 min realized a maximum monomeric plus oligomeric xylose yield of 93.1% compared to a maximum of only 71.5% for hydrothermal (no added mineral acid) pretreatment at 180 °C for 30 min. To explain differences in dilute acid and hydrothermal yields, a fast reacting xylan fraction (0.0889) was assumed to be able to directly form monomeric xylose while a slow reacting portion (0.9111) must first form oligomers during hydrothermal pretreatment. Two reactions to oligomers were proposed: reversible from fast reacting xylan and irreversible from slow reacting xylan. A kinetic model and its analytical solution simulated xylan removal data well for dilute acid and hydrothermal pretreatment of corn stover. These results suggested that autocatalytic reactions from xylan to furfural in hydrothermal pretreatment were controlled by oligomeric xylose decomposition, while acid-catalytic reactions in dilute acid pretreatment were controlled by monomeric xylose decomposition.     

Partial flow of compressed-hot water through corn stover to enhance hemicellulose sugar recovery and enzymatic digestibility of cellulose

Flowthrough pretreatment with compressed-hot water can significantly increase the removal of xylan and lignin and enhance xylose sugar yields and cellulose digestibility, especially at high flow rates. However, continuous flowthrough operations that realize these benefits suffer from a large amount of water consumption that leads to high energy requirements for pretreatment and downstream processing. Because high flow rates are particularly effective early in hemicellulose hydrolysis and less effective later, flow with compressed-hot water was applied at selected intervals, and performance was compared with that of batch and flowthrough operations for corn stover pretreated with compressed-hot water at 200 degrees C. Partial flow reduced water consumption by 60% compared with continuous flowthrough operation but still achieved higher xylose sugar yields (84-89%) compared to batch pretreatment (46.6%). In addition, corn stover cellulose pretreated by partial flow had higher enzymatic digestibility (88-90%) than batch operations (approximately 85%) at otherwise identical conditions, apparently due to much higher lignin removal for the former (40-45% vs 10-12%). Partial flow also reduced degradation, with recovery of xylose and glucose in the solids and hydrolyzate increased to 90-92% vs only about 76% for batch operation. The partial flow approach could be further improved by optimizing the operating strategy and reaction conditions, suggesting that this novel pretreatment could lead to advanced biomass pretreatment technology.     

Removal of acetic acid and sulfuric acid from biomass hydrolyzate using a lime addition–capacitive deionization (CDI) hybrid process

In this study, we developed a lime addition–capacitive deionization (CDI) hybrid process that can efficiently remove acetic acid and sulfuric acid from the model mixture of glucose, xylose, acetic acid, and sulfuric acid, which are the major components from the biomass hydrolyzate by acid hydrolysis. The key parameters of lime addition process (type of lime, amount of lime, stirrer speed, and reaction time) and CDI process (voltage, flow rate, and feed concentration) were also optimized. In the lime addition process, the optimal lime type, (sulfuric acid + acetic acid)/lime molar ratio, stirrer speed, and reaction time for the removal of sulfuric acid were CaCO₃, 1:1, 200 rpm, and 6 min, respectively. For the CDI process, the optimal voltage and flow rate were 1.2 V and 20 mL/min, respectively. The efficiency of acid removal increased as the initial acetic acid concentration decreased. This hybrid process was able to remove 98.08% of sulfuric acid and 76.97% of acetic acid from the mixture of glucose, xylose, acetic acid, and sulfuric acid. The process was able to recover almost all sugar (>99%) at high purity (97.53%).     

Effect of xylan and lignin removal by batch and flowthrough pretreatment on the enzymatic digestibility of corn stover cellulose

Compared with batch systems, flowthrough and countercurrent reactors have important potential advantages for pretreating cellulosic biomass, including higher hemicellulose sugar yields, enhanced cellulose digestibility, and reduced chemical additions. Unfortunately, they suffer from high water and energy use. To better understand these trade-offs, comparative data are reported on xylan and lignin removal and enzymatic digestibility of cellulose for corn stover pretreated in batch and flowthrough reactors over a range of flow rates between 160 degrees and 220 degrees C, with water only and also with 0.1 wt% sulfuric acid. Increasing flow with just water enhanced the xylan dissolution rate, more than doubled total lignin removal, and increased cellulose digestibility. Furthermore, adding dilute sulfuric acid increased the rate of xylan removal for both batch and flowthrough systems. Interestingly, adding acid also increased the lignin removal rate with flow, but less lignin was left in solution when acid was added in batch. Although the enzymatic hydrolysis of pretreated cellulose was related to xylan removal, as others have shown, the digestibility was much better for flowthrough compared with batch systems, for the same degree of xylan removal. Cellulose digestibility for flowthrough reactors was related to lignin removal as well. These results suggest that altering lignin also affects the enzymatic digestibility of corn stover.     

Combined sugar yields for dilute sulfuric acid pretreatment of corn stover followed by enzymatic hydrolysis of the remaining solids

A number of previous studies determined dilute acid pretreatment conditions that maximize xylose yields from pretreatment or glucose yields from subsequent digestion of the pretreated cellulose, but our emphasis was on identifying conditions to realize the highest yields of both sugars from both stages. Thus, individual xylose and glucose yields are reported as a percentage of the total potential yield of both sugars over a range of sulfuric acid concentrations of 0.22%, 0.49% and 0.98% w/w at 140, 160, 180 and 200 degrees C. Up to 15% of the total potential sugar in the substrate could be released as glucose during pretreatment and between 15% and 90+% of the xylose remaining in the solid residue could be recovered in subsequent enzymatic hydrolysis, depending on the enzyme loading. Glucose yields increased from as high as 56% of total maximum potential glucose plus xylose for just enzymatic digestion to 60% when glucose released in pretreatment was included. Xylose yields similarly increased from as high as 34% of total potential sugars for pretreatment alone to between 35% and 37% when credit was taken for xylose released in digestion. Yields were shown to be much lower if no acid was used. Conditions that maximized individual sugar yields were often not the same as those that maximized total sugar yields, demonstrating the importance of clearly defining pretreatment goals when optimizing the process. Overall, up to about 92.5% of the total sugars originally available in the corn stover used could be recovered for coupled dilute acid pretreatment and enzymatic hydrolysis. These results also suggest that enhanced hemicellulase activity could further improve xylose yields, particularly for low cellulase loadings.     

Ethanol and furfural production from corn stover using a hybrid fractionation process with zinc chloride and simultaneous saccharification and fermentation (SSF)

A two-stage hybrid fractionation process was investigated to produce cellulosic ethanol and furfural from corn stover. In the first stage, zinc chloride (ZnCl₂) was used to selectively solubilize hemicellulose. During the second stage, the remaining treated solids were converted into ethanol using commercial cellulase and Saccharomyces cerevisiae or recombinant Escherichia coli, KO11. This hybrid fractionation process recovered 93.8% of glucan, 89.7% of xylan, 71.1% of arabinan, and 74.9% of lignin under optimal reaction conditions (1st stage: 5% acidified ZnCl₂, 7.5 ml/min, 150 °C (10 min) and 170 °C (10 min); 2nd stage: simultaneous saccharification and fermentation (SSF) using S. cerevisiae). The furfural yield from the hemicellulose hydrolysates was 58%. The SSF of the treated solids resulted in 69–98% of the theoretical maximum ethanol yields based on the glucan content in the treated solids. After fermentation, the solid residues contained primarily lignin. Based on the total lignin in untreated corn stover, the lignin recovery yield was 74.9%.     

玉米秸秆不同部位的组成及其对预处理的影响

不同玉米秸秆部位的成分组成及分布对预处理和酶解影响显著。研究表明:韧皮部与髓芯的成分相近,但叶子的差异较大,其木聚糖和总糖的质量分数最高,分别为29.48%和66.15%,而木质素的质量分数最低,因而叶子更容易预处理。玉米秸秆在稀酸预处理过程中可回收96.9%葡聚糖和50.0%～70.0%木聚糖,其中50.0%～60.0%木聚糖水解成木糖溶出;不同部位的木聚糖损失率与初始的木聚糖含量正相关;经稀酸预处理后,叶子中葡聚糖的质量分数最高,达72.40%,叶子和髓芯易于被纤维素酶水解生成葡萄糖,而韧皮部困难。不同部位的酶解得率与自身的葡聚糖含量正相关,与酸不溶木质素含量负相关,同时受原料的物理结构、葡聚糖和木质素大分子的化学组成等影响。     

Effect of biological pretreatment with Trametes hirsuta yj9 on enzymatic hydrolysis of corn stover

In this study, a newly isolated Trametes hirsuta yj9 was used to pretreat corn stover in order to enhance enzymatic digestibility. T. hirsuta yj9 preferentially degraded lignin to be as high as 71.49% after 42-day pretreatment. Laccase and xylanase was the major ligninolytic and hydrolytic enzyme, respectively and filter paper activity (FPA) increased gradually with prolonged pretreatment time. Sugar yields increased significantly after pretreatment with T. hirsuta yj9, reaching an enzymatic digestibility of 73.99% after 42 days of pretreatment. Scanning electron microscopy (SEM) showed significant structural changes in pretreated corn stover, the surface of pretreated corn stover became increasingly coarse, the gaps between cellulose fibers were visible, and many pores were developed. Correlation analysis showed that sugar yields were inversely proportional to the lignin contents, less related to cellulose and hemicellulose contents.     

Differential effects of mineral and organic acids on the kinetics of arabinose degradation under lignocellulose pretreatment conditions

Sugar degradation occurs during acid-catalyzed pretreatment of lignocellulosic biomass at elevated temperatures, resulting in degradation products that inhibit microbial fermentation in the ethanol production process. Arabinose, the second most abundant pentose in grasses like corn stover and wheat straw, degrades into furfural. This paper focuses on the first-order rate constants of arabinose (5 g/L) degradation to furfural at 150 and 170 °C in the presence of sulfuric, fumaric, and maleic acid and water alone. The calculated degradation rate constants (k_d) showed a correlation with the acid dissociation constant (pK_a), meaning that the stronger the acid, the higher the arabinose degradation rate. However, de-ionized water alone showed a catalytic power exceeding that of 50 mM fumaric acid and equaling that of 50 mM maleic acid. This cannot be explained by specific acid catalysis and the shift in pK_w of water at elevated temperatures. These results suggest application of maleic and fumaric acid in the pretreatment of lignocellulosic plant biomass may be preferred over sulfuric acid. Lastly, the degradation rate constants found in this study suggest that arabinose is somewhat more stable than its stereoisomer xylose under the tested conditions.     

Pretreatment of corn stover by aqueous ammonia

Corn stover was pretreated with aqueous ammonia in a flow-through column reactor, a process termed ammonia recycled percolation (ARP). This method was highly effective in delignifying of the biomass, reducing the lignin content by 70-85%. Most lignin removal occurred within the first 20 min of the process. Lignin removal by ARP was further confirmed by FTIR analysis and lignin staining. The ARP process solubilized 40-60% of the hemicellulose but left the cellulose intact. The solubilized carbohydrate existed in oligomeric form. Carbohydrate decomposition during the pretreatment was insignificant. Corn stover treated for 90 min exhibited enzymatic digestibility of 99% with 60 FPU/g of glucan enzyme loading, and 92.5% with 10 FPU/g of glucan. The digestibility of ARP treated corn stover was substantially higher than that of alpha-cellulose. The enzymatic digestibility was related with the removal of lignin and hemicellulose, perhaps due to increased surface area and porosity. The SEM pictures indicated that the biomass structure was deformed and its fibers exposed by the pretreatment. The crystallinity index increased with pretreatment reflecting removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ARP treatment.     

Comparison of microwaves to fluidized sand baths for heating tubular reactors for hydrothermal and dilute acid batch pretreatment of corn stover

Heating of batch tubular reactors with fluidized sand baths and with microwaves resulted in distinctive sugar yield profiles from pretreatment and subsequent enzymatic hydrolysis of corn stover at the same time, temperature, and dilute sulfuric acid concentration combinations and hydrothermal pretreatment conditions. Microwave heated pretreatment led to faster xylan, lignin, and acetyl removal as well as earlier xylan degradation than sand baths, but maximum sugar recoveries were similar. Solid state CP/MAS NMR revealed that microwave heating was more effective in altering cellulose structural features especially in breakdown of amorphous regions of corn stover than sand bath heating. Enzymatic hydrolysis of pretreated corn stover was improved by microwave heating compared to sand bath heating. Mechanisms were proposed to explain the differences in results for the two systems and provide new insights into pretreatment that can help advance this technology.     

Enhanced phenolic antioxidants production in submerged cultures of Inonotus obliquus in a ground corn stover medium

The medicinal mushroom Inonotus obliquus has been a folk remedy for a long time in East-European and Asian countries. It is currently ascribed to a number of phenolic compounds as well as triterpenoids and polysaccharides responsible for significant biological and pharmacological properties. A study was conducted to determine the effects of inclusion of lignocellulosic material, in this case corn stover on production and antioxidant activity of extracellular (EPC) and intracellular phenolic compounds (IPC) by Inonotus obliquus in submerged fermentation. The corn stover medium contained 3% ground corn stover and 3.5% corn flour but the control medium contained 5% corn flour without corn stover. All of the other components were same in the two media. Decomposition rates of cellulose, hemicellulose, and lignin in the corn stover substrate were 20.9%, 17.9%, and 19.8% through 288 h of submerged cultivation. Lignocellulose decomposition in the corn stover-containing medium yielded significantly higher EPC (118.9/135.7 mg GAE (gallic acid equivalents)) and IPC (21.2/23.7 mg GAE) than in the control medium (34.7/42.5 mg GAE of EPC and 12.5/13.5 mg GAE of IPC) per liter of culture broth (EPC) and per gram of mycelia (IPC) in shake flask cultures/10 L fermenter runs. Both EPC and IPC from the corn stover medium showed a higher scavenging activity against hydroxyl radicals and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals than those from the control medium during the later fermentation period. In dose-dependent experiments, EPC from the corn stover medium at 216 h demonstrated a significantly stronger free radical scavenger activity against DPPH and hydroxyl radicals, shown as much lower IC50 values, than that from the control medium and IPC from the two media.     

Corn stover pretreatment by inorganic salts and its effects on hemicellulose and cellulose degradation

Inorganic salts, NaCl, KCl, CaCl₂, MgCl₂, FeCl₂, FeSO₄, FeCl₃, and Fe₂(SO₄)₃, were studied as catalysts for the degradation of hemicellulose in corn stover. FeCl₃ significantly increased the hemicellulose degradation in aqueous solutions heated between 140 and 200 °C with high xylose recovery and low cellulose removal, amounting to 90% and <10%, respectively. Hemicellulose removal increased 11-fold when the corn stover was pretreated with 0.1 M FeCl₃ compared to pretreatment with hot water under otherwise the same conditions, which was also 6-fold greater than pretreatment with dilute sulfuric acid at the same pH. Optimum pretreatment conditions were found where the corn stover was pretreated with 0.1 M FeCl₃ at 140 °C for 20 min. Under such conditions, 91% of hemicellulose was removed, and the recovery of monomeric and oligomeric xylose in liquid fraction achieved 89%, meanwhile, only 9% of cellulose was removed.     

Optimizing harvest of corn stover fractions based on overall sugar yields following ammonia fiber expansion pretreatment and enzymatic hydrolysis

Background  

Corn stover composition changes considerably throughout the growing season and also varies between the various fractions of the plant. These differences can impact optimal pretreatment conditions, enzymatic digestibility and maximum achievable sugar yields in the process of converting lignocellulosics to ethanol. The goal of this project was to determine which combination of corn stover fractions provides the most benefit to the biorefinery in terms of sugar yields and to determine the preferential order in which fractions should be harvested. Ammonia fiber expansion (AFEX) pretreatment, followed by enzymatic hydrolysis, was performed on early and late harvest corn stover fractions (stem, leaf, husk and cob). Sugar yields were used to optimize scenarios for the selective harvest of corn stover assuming 70% or 30% collection of the total available stover.     

Biomimetic catalysis for hemicellulose hydrolysis in corn stover

Efficient and economical hydrolysis of plant cell wall polysaccharides into monomeric sugars is a significant technical hurdle in biomass processing for renewable fuels and chemicals. One possible approach to overcoming this hurdle is a biomimetic approach with dicarboxylic acid catalyst mimicking the catalytic core microenvironment in natural enzymes. This paper reports developments in the use of a dicarboxylic acid catalyst, maleic acid, for hemicellulose hydrolysis in corn stover. Hemicellulose hydrolysis and xylose degradation kinetics in the presence of maleic acid was compared to sulfuric acid. At optimized reaction conditions for each acid, maleic acid hydrolysis results in minimal xylose degradation, whereas sulfuric acid causes 3-10 times more xylose degradation. These results formed the basis for optimizing the hydrolysis of hemicellulose from corn stover using maleic acid. At 40 g/L dry corn stover solid-loading, both acid catalysts can achieve near-quantitative monomeric xylose yield. At higher solids loadings (150-200 g dry stover per liter), sulfuric acid catalyzed hydrolysis results in more than 30% degradation of the xylose, even under the previously reported optimal condition. However, as a result of minimized xylose degradation, optimized biomimetic hydrolysis of hemicellulose by maleic acid can reach approximately 95% monomeric xylose yields with trace amounts of furfural. Fermentation of the resulting unconditioned hydrolysate by recombinant S. cerevisiae results in 87% of theoretical ethanol yield. Enzyme digestibility experiments on the residual corn stover solids show that >90% yields of glucose can be produced in 160 h from the remaining cellulose with cellulases (15 FPU/g-glucan).     

Structural changes of corn stover lignin during acid pretreatment

In this study, raw corn stover was subjected to dilute acid pretreatments over a range of severities under conditions similar to those identified by the National Renewable Energy Laboratory (NREL) in their techno-economic analysis of biochemical conversion of corn stover to ethanol. The pretreated corn stover then underwent enzymatic hydrolysis with yields above 70?% at moderate enzyme loading conditions. The enzyme exhausted lignin residues were characterized by (31)P NMR spectroscopy and functional moieties quantified and correlated to enzymatic hydrolysis yields. Results from this study indicated that both xylan solubilization and lignin degradation are important for improving the enzyme accessibility and digestibility of dilute acid pretreated corn stover. At lower pretreatment temperatures, there is a good correlation between xylan solubilization and cellulose accessibility. At higher pretreatment temperatures, lignin degradation correlated better with cellulose accessibility, represented by the increase in phenolic groups. During acid pretreatment, the ratio of syringyl/guaiacyl functional groups also gradually changed from less than 1 to greater than 1 with the increase in pretreatment temperature. This implies that more syringyl units are released from lignin depolymerization of aryl ether linkages than guaiacyl units. The condensed phenolic units are also correlated with the increase in pretreatment temperature up to 180?°C, beyond which point condensation reactions may overtake the hydrolysis of aryl ether linkages as the dominant reactions of lignin, thus leading to decreased cellulose accessibility.     

2,3-Butanediol production using Klebsiella oxytoca ATCC 8724: Evaluation of biomass derived sugars and fed-batch fermentation process

For this study, 2,3-butanediol (BD) fermentation from pure and biomass-derived sugar were optimized in shake-flask and 5-L bioreactor levels using Klebsiella oxytoca ATCC 8724. The results showed that 70 g/L of single sugar (glucose or xylose) and 90 g/L of mixed-sugar (glucose:xylose = 2:1) were optimum concentrations for efficient 2,3-BD fermentation. At optimum sugar concentrations, 2,3-BD productivities were 1.03, 0.64 and 0.50 gL⁻¹ h⁻¹, and yields were 0.43, 0.36 and 0.35 g/g in glucose, xylose and mixed-sugar medium, respectively. The lack of simultaneous utilization of glucose and xylose led to the lowest productivity in the mixed-sugar medium. Detoxification of biomass hydrolyzates was necessary for efficient 2,3-BD fermentation when sugar concentrations in the medium was 90 g/L or higher, but not with sugar concentrations of 30 g/L or less. A fed-batch fermentation using glucose medium led to an increase 2,3-BD titer to 79.4 g/L and yields 0.47 g/g, while productivity decreased to 0.79 gL⁻¹ h⁻¹. However, the fed-batch process was inefficient using mixed-sugar and biomass hydrolyzates because of poor xylose utilization. These results indicated that appropriate biomass processing technologies must be developed to generate separate glucose and xylose streams to produce high 2,3-BD titer from biomass-derived sugar using a fed-batch process.     

Enhancement of the enzymatic digestibility of sugarcane bagasse by alkali–peracetic acid pretreatment

The enzymatic digestibility of sugarcane bagasse was greatly increased by alkali (NaOH)–peracetic acid (PAA) pretreatment under mild conditions. The effects of several factors affecting the pretreatment were investigated. It was found that when bagasse was pre-pretreated by 10% (based on initial dry materials) NaOH with 3:1 liquid-to-solid ratio at 90 °C for 1.5 h and further delignified by 10% peracetic acid (based on initial dry materials) at 75 °C for 2.5 h, the yield of reducing sugars reached 92.04% by enzymatic hydrolysis for 120 h with cellulase loading of 15 FPU/g solid. Compared with acid and alkali pretreatment, alkali–PAA pretreatment could be conducted under milder conditions and was more effective for delignification with less carbohydrates being degraded in the pretreatment process. Alkaline stage played an important role for partial delignification, swelling fibers and subsequently reducing PAA loading. No loss of cellulase activity (FPA) was observed in the liquid phase for alkali–PAA pretreated bagasse after enzymatic hydrolysis for 120 h.