Assignment of the three disulfide bonds of Selenocosmia huwena lectin-I from the venom of spider Selenocosmia huwena.

The positions of the disulfide bonds of Selenocosmia huwena lectin-I (SHL-I) from the venom of the Chinese bird spider S. huwena have been determined. The existence of three disulfide bonds in the native SHL-I was proved by matrix-assisted laser desorption ionization time-of-flight mass spectroscopic analysis. To map the disulfide bonds, native SHL-I was proteolytically digested. The resulting peptides were separated by reverse phase high-performance liquid chromatography. Matrix-assisted laser desorption ionization time-of-flight mass spectroscopic analysis indicated the presence of one disulfide bond Cys7-Cys19. The partially reduced peptides by using Tris-(2-carboxyethyl)-phosphine at pH 3.0 were purified by reverse phase high-performance liquid chromatography. Four M Guanidine-HCl was found to increase the yields of partially reduced peptides prominently. The free thiols were carboxamidomethlate by iodoacetamide. The specific location of another disulfide bond Cys2-Cys14 was proved by comparing N-terminal sequencing analysis of the partially reduced and alkylated SHL-I with that of the intact peptide. Finally, the three disulfide linkage of SHL-I could be assigned as Cys2-Cys14, Cys7-Cys19, Cys13-Cys26.     

Stability and structure-forming properties of the two disulfide bonds of alpha-conotoxin GI

alpha-Conotoxin GI is a 13 residue snail toxin peptide cross-linked by Cys2-Cys7 and Cys3-Cys13 disulfide bridges. The formation of the two disulfide bonds by thiol/disulfide exchange with oxidized glutathione (GSSG) has been characterized. To characterize formation of the first disulfide bond in each of the two pathways by which the two disulfide bonds can form, two model peptides were synthesized in which Cys3 and Cys13 (Cono-1) or Cys2 and Cys7 (Cono-2) were replaced by alanines. Equilibrium constants were determined for formation of the single disulfide bonds of Cono-1 and Cono-2, and an overall equilibrium constant was measured for formation of the two disulfide bonds of alpha-conotoxin GI in pH 7.00 buffer and in pH 7. 00 buffer plus 8 M urea using concentrations obtained by HPLC analysis of equilibrium thiol/disulfide exchange reaction mixtures. The results indicate a modest amount of cooperativity in the formation of the second disulfide bond in both of the two-step pathways by which alpha-conotoxin GI folds into its native structure at pH 7.00. However, when considered in terms of the reactive thiolate species, the results indicate substantial cooperativity in formation of the second disulfide bond. The solution conformational and structural properties of Cono-1, Cono-2, and alpha-conotoxin GI were studied by 1H NMR to identify structural features which might facilitate formation of the disulfide bonds or are induced by formation of the disulfide bonds. The NMR data indicate that both Cono-1 and Cono-2 have some secondary structure in solution, including some of the same secondary structure as alpha-conotoxin GI, which facilitates formation of the second disulfide bond by thiol/disulfide exchange. However, both Cono-1 and Cono-2 are considerably less structured than alpha-conotoxin GI, which indicates that formation of the second disulfide bond to give the Cys2-Cys7, Cys3-Cys13 pairing induces considerable structure into the backbone of the peptide.     

Solution structure of the recombinant penaeidin-3, a shrimp antimicrobial peptide

Penaeidins are a family of antimicrobial peptides of 47-63 residues isolated from several species of shrimp. These peptides display a proline-rich domain (N-terminal part) and a cysteine-rich domain (C-terminal part) stabilized by three conserved disulfide bonds whose arrangement has not yet been characterized. The recombinant penaeidin-3a of Litopenaeus vannamei (63 residues) and its [T8A]-Pen-3a analogue were produced in Saccharomyces cerevisiae and showed similar antimicrobial activity. The solution structure of the [T8A]-Pen-3a analogue was determined by using two-dimensional 1H NMR and simulated annealing calculations. The proline-rich domain, spanning residues 1-28 was found to be unconstrained. In contrast, the cysteine-rich domain, spanning residues 29-58, displays a well defined structure, which consists of an amphipathic helix (41-50) linked to the upstream and the downstream coils by two disulfide bonds (Cys32-Cys47 and Cys48-Cys55). These two coils are in turn linked together by the third disulfide bond (Cys36-Cys54). Such a disulfide bond packing, which is in agreement with the analysis of trypsin digests by ESI-MS, contributes to the highly hydrophobic core. Side chains of Arg45 and Arg50, which belong to the helix, and side chains of Arg37 and Arg53, which belong to the upstream and the downstream coils, are located in two opposite parts of this globular and compact structure. The environment of these positively charged residues, either by hydrophobic clusters at the surface of the cysteine-rich domain or by sequential hydrophobic residues in the unconstrained proline-rich domain, gives rise to the amphipathic character required for antimicrobial peptides. We hypothesize that the antimicrobial activity of penaeidins can be explained by a cooperative effect between the proline-rich and cysteine-rich features simultaneously present in their sequences.     

Human acid sphingomyelinase.

Human acid sphingomyelinase (haSMase, EC 3.1.4.12) catalyzes the lysosomal degradation of sphingomyelin to ceramide and phosphorylcholine. An inherited haSMase deficiency leads to Niemann-Pick disease, a severe sphingolipid storage disorder. The enzyme was purified and cloned over 10 years ago. Since then, only a few structural properties of haSMase have been elucidated. For understanding of its complex functions including its role in certain signaling and apoptosis events, complete structural information about the enzyme is necessary. Here, the identification of the disulfide bond pattern of haSMase is reported for the first time. Functional recombinant enzyme expressed in SF21 cells using the baculovirus expression system was purified and digested by trypsin. MALDI-MS analysis of the resulting peptides revealed the four disulfide bonds Cys120-Cys131, Cys385-Cys431, Cys584-Cys588 and Cys594-Cys607. Two additional disulfide bonds (Cys221-Cys226 and Cys227-Cys250) which were not directly accessible by tryptic cleavage, were identified by a combination of a method of partial reduction and MALDI-PSD analysis. In the sphingolipid activator protein (SAP)-homologous N-terminal domain of haSMase, one disulfide bond was assigned as Cys120-Cys131. The existence of two additional disulfide bridges in this region was proved, as was expected for the known disulfide bond pattern of SAP-type domains. These results support the hypothesis that haSMase possesses an intramolecular SAP-type activator domain as predicted by sequence comparison [Ponting, C.P. (1994) Protein Sci., 3, 359-361]. An additional analysis of haSMase isolated from human placenta shows that the recombinant and the native human protein possess an identical disulfide structure.     

Solution structure of Eucommia antifungal peptide: a novel structural model distinct with a five-disulfide motif

The three-dimensional structure in aqueous solution of Eucommia antifungal peptide 2 (EAFP2) from Eucommia ulmoides Oliv was determined using (1)H NMR spectroscopy. EAFP2 is a newly discovered 41-residue peptide distinct with a five-disulfide cross-linked motif. This peptide exhibits chitin-binding activity and inhibitory effects on the growth of cell wall chitin-containing fungi and chitin-free fungi. The structure was calculated by using torsion angle dynamic simulated annealing with a total of 614 distance restraints and 16 dihedral restraints derived from NOESY and DQF-COSY spectra, respectively. The five disulfide bonds were assigned from preliminary structures using a statistical analysis of intercystinyl distances. The solution structure of EAFP2 is presented as an ensemble of 20 conformers with a backbone RMS deviation of 0.65 (+/-0.13) A for the well-defined Cys3-Cys39 segment. The tertiary structure of EAFP2 represents the first five-disulfide cross-linked structural model of the plant antifungal peptide. EAFP2 adopts a compact global fold composed of a 3(10) helix (Cys3-Arg6), an alpha-helix (Gly26-Cys30), and a three-strand antiparallel beta-sheet (Cys16-Ser18, Tyr22-Gly24, and Arg36-Cys37). The tertiary structure of EAFP2 shows a chitin-binding domain (residues 11-30) with a hydrophobic face and a characteristic sector formed by the N-terminal 10 residues and the C-terminal segment cross-linked through the unique disulfide bond Cys7-Cys37, which brings all four positively charged residues (Arg6, Arg9, Arg36, and Arg40) onto a cationic face. On the basis of such a structural feature, the possible structural basis for the functional properties of EAFP2 is discussed.     

Disulfide bonding arrangements in active forms of the somatomedin B domain of human vitronectin

The N-terminal cysteine-rich somatomedin B (SMB) domain (residues 1-44) of the human glycoprotein vitronectin contains the high-affinity binding sites for plasminogen activator inhibitor-1 (PAI-1) and the urokinase receptor (uPAR). We previously showed that the eight cysteine residues of recombinant SMB (rSMB) are organized into four disulfide bonds in a linear uncrossed pattern (Cys(5)-Cys(9), Cys(19)-Cys(21), Cys(25)-Cys(31), and Cys(32)-Cys(39)). In the present study, we use an alternative method to show that this disulfide bond arrangement remains a major preferred one in solution, and we determine the solution structure of the domain using NMR analysis. The solution structure shows that the four disulfide bonds are tightly packed in the center of the domain, replacing the traditional hydrophobic core expected for a globular protein. The few noncysteine hydrophobic side chains form a cluster on the outside of the domain, providing a distinctive binding surface for the physiological partners PAI-1 and uPAR. The hydrophobic surface consists mainly of side chains from the loop formed by the Cys(25)-Cys(31) disulfide bond, and is surrounded by conserved acidic and basic side chains, which are likely to contribute to the specificity of the intermolecular interactions of this domain. Interestingly, the overall fold of the molecule is compatible with several arrangements of the disulfide bonds. A number of different disulfide bond arrangements were able to satisfy the NMR restraints, and an extensive series of conformational energy calculations performed in explicit solvent confirmed that several disulfide bond arrangements have comparable stabilization energies. An experimental demonstration of the presence of alternative disulfide conformations in active rSMB is provided by the behavior of a mutant in which Asn(14) is replaced by Met. This mutant has the same PAI-1 binding activity as rVN1-51, but its fragmentation pattern following cyanogen bromide treatment is incompatible with the linear uncrossed disulfide arrangement. These results suggest that active forms of the SMB domain may have a number of allowed disulfide bond arrangements as long as the Cys(25)-Cys(31) disulfide bond is preserved.     

Characterization of a defensin from the oyster Crassostrea gigas. Recombinant production, folding, solution structure, antimicrobial activities, and gene expression

In invertebrates, defensins were found in arthropods and in the mussels. Here, we report for the first time the identification and characterization of a defensin (Cg-Def) from an oyster. Cg-def mRNA was isolated from Crassostrea gigas mantle using an expressed sequence tag approach. To gain insight into potential roles of Cg-Def in oyster immunity, we produced the recombinant peptide in Escherichia coli, characterized its antimicrobial activities, determined its solution structure by NMR spectroscopy, and quantified its gene expression in vivo following bacterial challenge of oysters. Recombinant Cg-Def was active in vitro against Gram-positive bacteria but showed no or limited activities against Gram-negative bacteria and fungi. The activity of Cg-Def was retained in vitro at a salt concentration similar to that of seawater. The Cg-Def structure shares the so-called cystine-stabilized alpha-beta motif (CS-alphabeta) with arthropod defensins but is characterized by the presence of an additional disulfide bond, as previously observed in the mussel defensin (MGD-1). Nevertheless, despite a similar global fold, the Cg-Def and MGD-1 structures mainly differ by the size of their loops and by the presence of two aspartic residues in Cg-Def. Distribution of Cg-def mRNA in various oyster tissues revealed that Cg-def is mainly expressed in mantle edge where it was detected by mass spectrometry analyses. Furthermore, we observed that the Cg-def messenger concentration was unchanged after bacterial challenge. Our results suggest that Cg-def gene is continuously expressed in the mantle and would play a key role in oyster by providing a first line of defense against pathogen colonization.     

家蝇防御素基因的cDNA克隆及序列分析

Defensin is a kind of cationic.inducible antimicrobial peptide found in a large range of living organisms that contributes to host defense by disrupting the cytoplasmic membrane of microorganisms.with their broad antimicrobial spectrum and strong pharmaceutical effects.antimicrobial peptides,including defensins,represent a source of novel antibiotic agents.A novel full-length 430 base pairs cDNA of an insect defensin was cloned using polymerase chain reaction (PCR) from the cDnA library of houseflies(Musca domestica) that had been challenged by E.coli and staphylococcus taincd an NH2-terminal signal sequence(1-22)followed by a propeptide and the mature peptide(53-92),The sequence identity with other insect defensin is between 51% and 73%.The mature peptide,with a predicted molecular weight of 4.0kDa,and pI of 8.69,has 1 negative charged amino acid and 4 positice ones,the putative housefly defensin is characterized by 6 invariant cysteine residues forming 3 disulfide bonds,Cys1-Cys4,Cys2-Cys5 and Cys3-Cys6,These results suggest that the novel full-length cDNA of the defensin gene.Denominated Mdde,has been successfully cloned from houseflies.     

Structures of scrambled disulfide forms of the potato carboxypeptidase inhibitor predicted by molecular dynamics simulations with constraints

The structures of two species of potato carboxypeptidase inhibitor with nonnative disulfide bonds were determined by molecular dynamics simulations in explicit solvent using disulfide bond constraints that have been shown to work for the native species. Ten structures were determined; five for scrambled A (disulfide bonds between Cys8-Cys27, Cys12-Cys18, and Cys24-Cys34) and five for the scrambled C (disulfide bonds Cys8-Cys24, Cys12-Cys18, and Cys27-Cys34). The two scrambled species were both more solvent exposed than the native structure; the scrambled C species was more solvent exposed and less compact than the scrambled A species. Analysis of the loop regions indicates that certain loops in scrambled C are more nativelike than in scrambled A. These factors, combined with the fact that scrambled C has one native disulfide bond, may contribute to the observed faster conversion to the native structure from scrambled C than from scrambled A. Results from the PROCHECK program using the standard parameter database and a database specially constructed for small, disulfide-rich proteins indicate that the 10 scrambled structures have correct stereochemistry. Further, the results show that a characteristic feature of small, disulfide-rich proteins is that they score poorly using the standard PROCHECK parameter database. Proteins 2000;40:482-493.     

Human defensin 5 disulfide array mutants: disulfide bond deletion attenuates antibacterial activity against Staphylococcus aureus

Human α-defensin 5 (HD5, HD5(ox) to specify the oxidized and disulfide linked form) is a 32-residue cysteine-rich host-defense peptide, expressed and released by small intestinal Paneth cells, that exhibits antibacterial activity against a number of Gram-negative and -positive bacterial strains. To ascertain the contributions of its disulfide array to structure, antimicrobial activity, and proteolytic stability, a series of HD5 double mutant peptides where pairs of cysteine residues corresponding to native disulfide linkages (Cys(3)-Cys(31), Cys(5)-Cys(20), Cys(10)-Cys(30)) were mutated to Ser or Ala residues, overexpressed in E. coli, purified, and characterized. A hexa mutant peptide, HD5[Ser(hexa)], where all six native Cys residues are replaced by Ser residues, was also evaluated. Removal of a single native S-S linkage influences oxidative folding and regioisomerization, antibacterial activity, Gram-negative bacterial membrane permeabilization, and proteolytic stability. Whereas the majority of the HD5 mutant peptides show low micromolar activity against Gram-negative E. coli ATCC 25922 in colony counting assays, the wild-type disulfide array is essential for low micromolar activity against Gram-positive S. aureus ATCC 25923. Removal of a single disulfide bond attenuates the activity observed for HD5(ox) against this Gram-positive bacterial strain. This observation supports the notion that the HD5(ox) mechanism of antibacterial action differs for Gram-negative and Gram-positive species [Wei et al. (2009) J. Biol. Chem. 284, 29180-29192] and that the native disulfide array is a requirement for its activity against S. aureus.     

Respiratory chain strongly oxidizes the CXXC motif of DsbB in the Escherichia coli disulfide bond formation pathway

Escherichia coli DsbB has four essential cysteine residues, among which Cys41 and Cys44 form a CXXC redox active site motif and the Cys104-Cys130 disulfide bond oxidizes the active site cysteines of DsbA, the disulfide bond formation factor in the periplasm. Functional respiratory chain is required for the cell to keep DsbA oxidized. In this study, we characterized the roles of essential cysteines of DsbB in the coupling with the respiratory chain. Cys104 was found to form the inactive complex with DsbA under respiration-defective conditions. While DsbB, under normal aerobic conditions, is in the oxidized state, having two intramolecular disulfide bonds, oxidation of Cys104 and Cys130 requires the presence of Cys41-Cys44. Remarkably, the Cys41-Cys44 disulfide bond is refractory to reduction by a high concentration of dithiothreitol, unless the membrane is solubilized with a detergent. This reductant resistance requires both the respiratory function and oxygen, since Cys41-Cys44 became sensitive to the reducing agent when membrane was prepared from quinone- or heme-depleted cells or when a membrane sample was deaerated. Thus, the Cys41-Val-Leu-Cys44 motif of DsbB is kept both strongly oxidized and strongly oxidizing when DsbB is integrated into the membrane with the normal set of respiratory components.     

Local interactions and the role of the 6-120 disulfide bond in alpha-lactalbumin: implications for formation of the molten globule state

Molten globule states are partially folded states of proteins which are compact and contain a high degree of secondary structure but which lack many of the fixed tertiary interactions associated with the native state. A set of peptides has been prepared in order to probe the role of local interactions in the vicinity of the Cys(6)-Cys(120) disulfide bond in stabilizing the molten globule state of human alpha-lactalbumin. Peptides derived from the N-terminal and C-terminal regions of human alpha-lactalbumin have been analyzed using nuclear magnetic resonance, circular dichroism, fluorescence spectroscopy and sedimentation equilibrium experiments. A peptide corresponding to the first helical region in the native protein, residues 1-13, is only slightly helical in isolation. Extending the peptide to include residues 14-18 results in a modest increase in helicity. A peptide derived from the C-terminal 12 residues, residues 112-123, is predominantly unstructured. Crosslinking the N- and C-terminal peptides by the native disulfide bond results in almost no increase in structure and there is no evidence for any significant cooperative structure formation over the range of pH 2.2-11.7. These results demonstrate that there is very little enhancement of local structure due to the formation of the Cys(6)-Cys(120) disulfide bond. This is in striking contrast to peptides derived from the region of the Cys(28)-Cys(111) disulfide.     

Pathway of oxidative folding of alpha-lactalbumin: a model for illustrating the diversity of disulfide folding pathways

The pathway of oxidative folding of alpha-lactalbumin (alpha LA) (four disulfide bonds) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. In the absence of calcium, oxidative folding of alpha LA proceeds through highly heterogeneous species of one-, two-, three-, and four-disulfide (scrambled) intermediates to reach the native structure. In the presence of calcium, the folding intermediates of alpha LA comprise two predominant isomers (alpha LA-IIA and alpha LA-IIIA) adopting exclusively native disulfide bonds, including the two disulfide bonds (Cys(61)-Cys(77) and Cys(73)-Cys(91)) located within the beta-sheet calcium binding domain. alpha LA-IIA is a two-disulfide species consisting of Cys(61)-Cys(77) and Cys(73)-Cys(91) disulfide bonds. alpha LA-IIIA contains Cys(61)-Cys(77), Cys(73)-Cys(91), and Cys(28)-Cys(111) disulfide bonds. The underlying mechanism of the contrasting folding pathways of calcium-bound and calcium-depleted alpha LA is congruent with the cause of diversity of disulfide folding pathways observed among many well-characterized three-disulfide proteins, including bovine pancreatic trypsin inhibitor and hirudin. Our study also reveals novel aspects of the folding mechanism of alpha LA that have not been described previously.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.     

Identification of the disulfide bonds in human plasma protein SP-40,40 (apolipoprotein-J).

SP-40,40, a human plasma protein, is a modulator of the membrane attack complex formation of the complement system as well as a subcomponent of high-density lipoproteins. In the present study, the positions of the disulfide bonds in SP-40,40 were determined. SP-40,40 was purified from human seminal plasma by affinity chromatography using an anti-SP-40,40 monoclonal antibody and reversed-phase, high-performance liquid chromatography (HPLC). The protein was digested with trypsin and the fragments were separated by reversed-phase HPLC. The peptides containing disulfide bonds were fluorophotometrically detected with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (ABD-F). The peptides containing more than two disulfide bonds were further digested with Staphylococcus aureus V8 protease and lysylendopeptidase, and the fragments were isolated by HPLC. The amino acid compositions and the amino acid sequences of the peptides containing only a disulfide bond were determined. Disulfide bonds thus determined were between Cys58(alpha)-Cys107(beta), Cys68(alpha)-Cys99(beta), Cys75(alpha)-Cys94(beta), and Cys86(alpha)-Cys80(beta). Since there was no free sulfhydryl groups in the SP-40,40 molecule, Cys78(alpha) and Cys91(beta) should also be linked by a disulfide bond. It is notable that all of the disulfide bonds in SP-40,40 are not only formed by inter-chain pairing, but also appear to form an antiparallel ladder-like structure between the two chains. The unique structure could be related to the functions of SP-40,40.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Folding studies of Cox17 reveal an important interplay of cysteine oxidation and copper binding

Cox17 is a key mitochondrial copper chaperone involved in the assembly of cytochrome c oxidase (COX). The NMR solution structure of the oxidized apoCox17 isoform consists of a coiled-coil conformation stabilized by two disulfide bonds involving Cys(26)/Cys(57) and Cys(36)/Cys(47). This appears to be a conserved tertiary fold of a class of proteins, localized within the mitochondrial intermembrane space, that contain a twin Cys-x(9)-Cys sequence motif. An isomerization of one disulfide bond from Cys(26)/Cys(57) to Cys(24)/Cys(57) is required prior to Cu(I) binding to form the Cu(1)Cox17 complex. Upon further oxidation of the apo-protein, a form with three disulfide bonds is obtained. The reduction of all disulfide bonds provides a molten globule form that can convert to an additional conformer capable of binding up to four Cu(I) ions in a polycopper cluster. This form of the protein is oligomeric. These properties are framed within a complete model of mitochondrial import and COX assembly.     

Selectivity of tryptophan residues in mediating photolysis of disulfide bridges in goat alpha-lactalbumin

Goat alpha-lactalbumin (GLA) contains four tryptophan (Trp) residues and four disulfide bonds. Illumination with near-UV light results in the cleavage of disulfide bridges and in the formation of free thiols. To obtain information about the reaction products, the illuminated protein was carbamidomethylated and digested with trypsin and the peptides were analyzed by mass spectrometry. Peptides containing Cys120Cam, Cys61Cam, or Cys91Cam were detected, as well as two peptides containing a new Cys-Lys cross-link. In one, Cys6 was cross-linked to Lys122, while the cross-link in the second was either a Cys91-Lys79 or Cys73-Lys93 cross-link; however, the exact linkage could not be defined. The results demonstrate photolytic cleavage of the Cys6-Cys120, Cys61-Cys77, and Cys73-Cys91 disulfide bonds. While photolysis of Cys6-Cys120 and Cys73-Cys91 disulfide bonds in GLA has been reported, cleavage of the Cys61-Cys77 disulfide bonds has not been previously detected. To examine the contribution of the individual Trp residues, we constructed the GLA mutants, W26F, W60F, W104F, and W118F, by replacing single Trp residues with phenylalanine (Phe). The substitution of each Trp residue led to less thiol production compared to that for wild-type GLA, showing that each Trp residue in GLA contributed to the photolytic cleavage of disulfide bridges. The specificity was expressed by the nature of the reaction products. No cleavage of the Cys6-Cys120 disulfide bridge was detected when the W26F mutant was illuminated, and no cleavage of the Cys73-Cys91 disulfide bridge was seen following illumination of W26F or W104F. In contrast, Cys61Cam, resulting from the cleavage of the Cys61-Cys77 disulfide bridge, was found following illumination of any of the mutants.     

Evidence for intramolecular disulfide bond shuffling in the folding of mutant human lysozyme

Our previous results using the Saccharomyces cerevisiae secretion system suggest that intramolecular exchange of disulfide bonds occurs in the folding pathway of human lysozyme in vivo (Taniyama, Y., Yamamoto, Y., Kuroki, R., and Kikuchi, M. (1990) J. Biol. Chem. 265, 7570-7575). Here we report on the results of introducing an artificial disulfide bond in mutants with 2 cysteine residues substituting for Ala83 and Asp91. The mutant (C83/91) protein was not detected in the culture medium of the yeast, probably because of incorrect folding. Thereupon, 2 cysteine residues Cys77 and Cys95 were replaced with Ala in the mutant C83/91, because a native disulfide bond Cys77-Cys95 was found not necessary for correct folding in vivo (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). The resultant mutant (AC83/91) was secreted as two proteins (AC83/91-a and AC83/91-b) with different specific activities. Amino acid and peptide mapping analyses showed that two glutathiones appeared to be attached to the thiol groups of the cysteine residues introduced into AC83/91-a and that four disulfide bonds including an artificial disulfide bond existed in the AC83/91-b molecule. The presence of cysteine residues modified with glutathione may indicate that the non-native disulfide bond Cys83-Cys91 is not so easily formed as a native disulfide bond. These results suggest that the introduction of Cys83 and Cys91 may act to suppress the process of native disulfide bond formation through disulfide bond interchange in the folding of human lysozyme.     

Location of the disulfide bonds in the antitumor protein neocarzinostatin.

Two disulfide bonds in the antitumor antibiotic neocarzinostatin were determined chemically. The peptic and peptic/thermolytic peptides from the native protein were isolated by gel filtration and ion-exchange chromatography followed by reverse-phase HPLC. The cystine peptides obtained were oxidized separately by performic acid treatment and further separated by HPLC into cysteic acid peptides. Sequence analyses of the isolated peptides revealed the location of the disulfide bonds at Cys37-Cys47 and Cys88-Cys93.