Helper virus-free transfer of herpes simplex virus type 1 plasmid vectors into neural cells.

Herpes simplex virus type 1 (HSV-1) plasmid vectors have promise for genetic intervention in the brain, but several problems caused by the helper virus have compromised their utility. To develop a helper virus-free packaging system for these vectors, the DNA cleavage/packaging signals were deleted from a set of cosmids that represents the HSV-1 genome. Following cotransfection into cells, this modified cosmid set supported replication and packaging of vector DNA. However, in the absence of the DNA cleavage/packaging signals, the HSV-1 genome was not packaged, and consequently vector stocks were free of detectable helper virus. In the absence of helper virus, the vectors efficiently infected rat neural cells in culture or in the brain with minimal cytopathic effects. beta-galactosidase-positive cells were observed for at least 1 month in vivo, and vector DNA persisted for this period. This system may facilitate studies on neuronal physiology and potential therapeutic applications.     

表达绿色荧光蛋白报告基因重组禽腺联病毒载体系统的构建与鉴定

为了开展重组禽腺联病毒(Recombinant avian adeno-associated virus,rAAAV)介导的基因转移研究,用限制性内切酶消化含AAAV全基因组的重组质粒pCR-AAAV,去除AAAV Rep和Cap蛋白编码序列,将PCR扩增的绿色荧光蛋白(Green fluorescent protein,GFP)报告基因插入AAAV末端反向重复序列(Inverted terminal repeats,ITR)之间,获得表达GFP基因的AAAV转移载体pAITR-GFP;以含AAAV全基因组的质粒为模板,用PCR分别扩增AAAV Rep、Cap和Rep-Cap蛋白基因,将Rep和Cap基因分别插入真核细胞双表达载体pVITRO2-mcs的两个多克隆位点,将Rep-Cap蛋白基因插入真核细胞表达载体pcDNA3,获得AAAV辅助质粒pVITRO2-ARC和pcDNA-ARC;将pAITR-GFP、pVITRO2-ARC或pcDNA-ARC与腺病毒辅助质粒pHelper组成三质粒转染系统,用磷酸钙沉淀法共转染AAV-293细胞,获得了表达GFP的rAAAV.经SDS-聚丙烯酰胺凝胶电泳分离后,纯化病毒出现分子量正确的VP1、VP2、VP3结构蛋白;经PCR检测证明,重组病毒中含有GFP报告基因;用重组病毒分别感染鸡胚成纤维细胞(CEF)和鸡胚肝CEL细胞,可以观察到GFP报告基因的表达,表达时间持续两周以上.这些试验结果表明,成功建立了辅助病毒非依赖性rAAAV体外包装体系,为禽源细胞的基因转移研究和禽重组活载体疫苗的研制打下了基础.     

An Enhanced Packaging System for Helper-Dependent Herpes Simplex Virus Vectors

Helper-dependent herpes simplex virus (HSV) vectors (amplicons) show considerable promise to provide for long-term transduced-gene expression in most cell types. The current packaging system of choice for these vectors involves cotransfection with a set of five overlapping cosmids that encode the full HSV type 1 (HSV-1) helper virus genome from which the packaging (pac) elements have been deleted. Although both the helper virus and the HSV amplicon can replicate, only the latter is packaged into infectious viral particles. Since the titers obtained are too low for practical application, an enhanced second-generation packaging system was developed by modifying both the helper virus and the HSV amplicon vector. The helper virus was reverse engineered by using the original five cosmids to generate a single HSV-bacterial artificial chromosome (BAC) clone in Escherichia coli from which the pac elements were deleted to generate a replication-proficient but packaging-defective HSV-1 genome. The HSV amplicon was modified to contain the simian virus 40 origin of replication, which acts as an HSV-independent replicon to provide for the replicative expansion of the vector. The HSV amplicon is packaged into infectious particles by cotransfection with the HSV-BAC helper virus into the 293T cell line, and the resulting cell lysate is free of detectable helper virus contamination. The combination of both modifications to the original packaging system affords an eightfold increase in the packaged-vector yield.     

A trial of somatic gene targeting in vivo with an adenovirus vector

We have constructed and evaluated the utility of a helper-dependent virus vector system that is derived from Human Cytomegalovirus (HCMV). This vector is based on the herpes simplex virus (HSV) amplicon system and contains the HCMV orthologs of the two cis-acting functions required for replication and packaging of HSV genomes, the complex HCMV viral DNA replication origin (oriLyt), and the cleavage packaging signal (the a sequence). The HCMV amplicon vector replicated independently and was packaged into infectious virions in the presence of helper virus. This vector is capable of delivering and expressing foreign genes in infected cells including progenitor cells such as human CD34+ cells. Packaged defective viral genomes were passaged serially in fibroblasts and could be detected at passage 3; however, the copy number appeared to diminish upon serial passage. The HCMV amplicon offers an alternative vector strategy useful for gene(s) delivery to cells of the hematopoietic lineage.     

A novel recombinant adeno-associated virus vector packaging system with HSV-1 amplicon providing helper functions

A novel packaging system for producing recombinant adeno-associated virus (rAAV) vector was described. Instead of the conventional method for rAAV production by two-plasmid co-transfection followed by superinfection with adenovirus 5, an HSV-1 amplicon system expressing AAV-2 rep and cap genes from their native promoters was used to provide complete helper functions for rAAV replicating and packaging. This HSV-1 ampticon stock consisted of two kinds of infectious HSV-1 virions, a replicating-defective HSV-1 amplicon pseudovirus harboring multi-copies of AAV-2 rep and cap gene and a temperature-sensitive HSV-1 mutant strain ts-KOS. High-titer rAAV was generated with this new packaging system. This packaging system gives a simple and scaleable process for rAAV production.     

Recombinant adeno-associated virus type 2 replication and packaging is entirely supported by a herpes simplex virus type 1 amplicon expressing Rep and Cap.

Recombinant adeno-associated virus (AAV) type 2 (rAAV) vectors have recently been shown to have great utility as gene transfer agents both in vitro and in vivo. One of the problems associated with the use of rAAV vectors has been the difficulty of large-scale vector production. Low-efficiency plasmid transfection of the rAAV vector and complementing AAV type 2 (AAV-2) functions (rep and cap) followed by superinfection with adenovirus has been the standard approach to rAAV production. The objectives of this study were to demonstrate the ability of a recombinant herpes simplex virus type 1 (HSV-1) amplicon expressing AAV-2 Rep and Cap to support replication and packaging of rAAV vectors. HSV-1 amplicon vectors were constructed which contain the AAV-2 rep and cap genes under control of their native promoters (p5, p19, and p40). An HSV-1 amplicon vector, HSV-RC/KOS or HSV-RC/d27, was generated by supplying helper functions with either wild-type HSV-1 (KOS strain) or the ICP27-deleted mutant of HSV-1, d27-1, respectively. Replication of the amplicon stocks is not inhibited by the presence of AAV-2 Rep proteins, which highlights important differences between HSV-1 and adenovirus replication and the mechanism of providing helper function for productive AAV infection. Coinfection of rAAV and HSV-RC/KOS resulted in the replication and amplification of rAAV genomes. Similarly, rescue and replication of rAAV genomes occurred when rAAV vector plasmids were transfected into cells followed by HSV-RC/KOS infection and when two rAAV proviral cell lines were infected with HSV-RC/KOS or HSV-RC/d27. Production of infectious rAAV by rescue from two rAAV proviral cell lines has also been achieved with HSV-RC/KOS and HSV-RC/d27. The particle titer of rAAV produced with HSV-RC/d27 is equal to that achieved by supplying rep and cap by transfection followed by adenovirus superinfection. Importantly, no detectable wild-type AAV-2 is generated with this approach. These results demonstrate that an HSV-1 amplicon expressing the AAV-2 genes rep and cap along with HSV-1 helper functions supports the replication and packaging of rAAV vectors in a scaleable process.     

Production of an infectious Herpesvirus saimiri-based episomally maintained amplicon system

Viral vectors have a number of obstacles to overcome for effective gene therapy, including immune stimulation, packaging potential and cell tropism. Herpesvirus saimiri (HVS) has many favourable traits including, a large packaging capability, wide cell tropism, and the ability to episomally persist as an artificial chromosome. To further develop HVS as a gene therapy vector we aim to produce a safe disabled HVS-based recombinant viral system for gene therapy applications. An HVS recombinant viral amplicon was constructed with a transgene packaging potential of 50 kb. The recombinant HVS genome was shown to be replication disabled and used to generate a stable cell line, OMKHVS Delta Bam, in which the modified genome persists as a non-integrated episome. To assess whether the modified genome could be packaged into a virus-like particle (HVSampVLP), OMKHVS Delta Bam was infected with replication competent virus or transfected with a defective helper virus. The resultant HVSampVLPs were able to infect SW480 tumour cells, delivering the recombinant disabled genome, which persisted as a non-integrated episome in the dividing cell population. This study forms the basis of a replication disabled HVS amplicon system for use in gene therapy applications.     

Redesign of retrovirus packaging cell lines to avoid recombination leading to helper virus production.

Retrovirus vectors can be made in the absence of helper virus by using retrovirus packaging cell lines. Helper-free virus is critical for a variety of gene transfer studies. The most useful packaging cell lines contain helper virus DNA from which the signal required for packaging of the viral RNA genome into virions has been deleted. However, we showed that the ability to package virus is conferred at very low frequency to cells infected with virus from these packaging cell lines, presumably by low-frequency transmission of the deleted virus genome. In addition, these packaging cell lines can interact with some retroviral vectors to yield replication-competent virus. We constructed packaging cell lines containing helper virus DNA that had several alterations in addition to deletion of the packaging signal. The new packaging cells retained the useful features of previously available lines but did not yield helper virus after introduction of any of the vectors tested, and transfer of the packaging function was not detected.     

Flow cytometric assessment of transduction efficiency and cytotoxicity of herpes simplex virus type 1-based amplicon vectors

BACKGROUND: In this study, we compared herpes simplex virus type 1 (HSV-1) amplicon vector stocks prepared by transient cotransfection with two different BAC-cloned packaging-defective HSV-1 helper genomes, fHSVDeltapacDelta27 and fHSVDeltapac, with respect to transduction efficiency and cytotoxicity. Both fHSVDeltapacDelta27 and fHSVDeltapac are packaging defective because the pac signals have been deleted; fHSVDeltapacDelta27 contains an additional deletion in the HSV-1 ICP27 gene, which increases the safety of the system. METHODS: HSV-1 amplicon pHSVGFP under the control of the HSV-1 immediate-early (IE) 4/5 promotor was packaged into virus particles by transient cotransfection with either fHSVDeltapacDelta27 or fHSVDeltapac DNA. Cultures were infected with the two different vector stocks and examined under the fluorescence microscope and analyzed by flow cytometry over a 5-day period to assess transduction efficiency and cytotoxicity. RESULTS: Both vector stocks, pHSVGFP[fHSVDeltapacDelta27] and pHSVGFP[fHSVDeltapac], efficiently transduced the target cells. Interestingly, the highest mean fluorescence intensities were measured at 1 day after infection, whereas the number of GFP-fluorescent cells reached a peak at day 3 after infection. At day 3 after infection, a slight increase in the number of dead cells was observed in those cultures transduced with high doses of vector stock. Between days 3 and 4 after infection, the number of dead cells increased dramatically in all the cultures, transduced and nontransduced. Only the cultures infected with a high dose of pHSVGFP[fHSVDeltapac] displayed a significant further increase in the number of dead cells between days 4 and 5 postinfection. CONCLUSIONS: Flow cytometry allowed comparison of transduction efficiency and cytotoxicity mediated by the two different amplicon vector stocks. Cultures infected with pHSVGFP[fHSVDeltapacDelta27] were more viable than those infected with pHSVGFP[fHSVDeltapac](P < 0.05). The practical implications of this study are at the level of vector design. Flow cytometry has proven a fast and reliable approach to assess the quality of potential gene transfer vectors prior to their use in (pre) clinical trials.     

A Lentivirus Packaging System Based on Alternative RNA Transport Mechanisms To Express Helper and Gene Transfer Vector RNAs and Its Use To Study the Requirement of Accessory Proteins for Particle Formation and Gene Delivery

A lentivirus-based packaging system was designed to reduce the chance of recombination between helper and gene transfer vector sequences by using the constitutive transport element (CTE) derived from Mason-Pfizer monkey virus for expression of the viral proteins and the Rev-Rev response element (RRE) combination for expression of the gene transfer vector. Using this approach, we evaluated a series of human immunodeficiency virus type 1 packaging constructs that express one or more accessory proteins (Vif, Vpr, and Vpu), in addition to the Gag and Pol proteins, for particle formation and virus stock production for gene transfer. Constructs that also express Vpr or both Vpr and Vpu produced more particles, as measured by a p24 assay, than did plasmids that did not contain these sequences. Transactivation experiments showed that the packaging plasmids that encode Vpr or both Vpr and Vpu also expressed a functional single-exon Tat protein. For these constructs, high-titer virus stocks could be prepared in the absence of a cotransfected Tat-expressing plasmid. Amphotropic-envelope-pseudotyped virus stocks prepared with all of the packaging constructs, irrespective of whether any of the accessory proteins were coexpressed, were equally efficient in transducing growth-arrested HeLa cells. The combination/mixed packaging system was compared to systems that were based on either the CTE alone or Rev and RRE for expression of both the packaging plasmid as well as the gene transfer vector. The combination/mixed packaging system was comparable to the other systems for production of virus stocks, suggesting that this design may prove to be safer for the eventual deployment of lentivirus vectors for therapeutic purposes.     

Cre levels limit packaging signal excision efficiency in the Cre/loxP helper-dependent adenoviral vector system

Helper-dependent (HD) adenovirus vectors devoid of all viral coding sequences have a large cloning capacity and provide long-term transgene expression in vivo with negligible toxicity, making them attractive vectors for gene therapy. Currently, the most efficient means of producing HD vectors involves coinfecting 293 cells expressing Cre with the HD vector and a helper virus bearing a packaging signal flanked by loxP sites. Cre-mediated packaging signal excision renders the helper virus genome unpackageable but still able to replicate and provide helper functions for HD vector propagation. Typically, helper virus contamination is < or =1% pre- and < or =0.1% postpurification by CsCl banding. While these contamination levels are low, further reduction is desirable. However, this objective has not been realized since the Cre/loxP system was first developed. This lack of progress is due, at least in part, to our lack of understanding of the origins of the contaminating helper virus, thus rendering its reduction or elimination difficult to achieve. This study was designed to investigate the possible sources of contaminating helper virus persisting during HD vector amplification. The results revealed that Cre is limiting in helper virus-infected Cre-expressing 293 cells, thereby permitting helper viruses to escape packaging signal excision and propagate. The results of this study should provide a foundation for developing rational strategies to further reduce or possibly eliminate the contaminating helper virus.     

Fifty-one kilobase HSV-1 plasmid vector can be packaged using a helper virus-free system and supports expression in the rat brain

Herpes simplex virus type 1 (HSV-1) plasmid vectors have a number of attractive features for gene transfer into neurons. In particular, the large size of the HSV-1 genome suggests that HSV-1 vectors might be designed to accommodate large inserts. We now report the construction and characterization of a 51 kb HSV-1 plasmid vector. This vector was efficiently packaged into HSV-1 particles using a helper virus-free packaging system. The structure of the packaged vector DNA was verified by both Southern blot and PCR analyses. A vector stock was microinjected into the rat striatum, the rats were sacrificed at 4 days after gene transfer, and numerous X-gal positive striatal cells were observed. This 51 kb vector was constructed using general principles that may support the routine construction of large vectors. Potential applications of such HSV-1 vectors include characterizing large promoter fragments or genomic clones and co-expressing multiple genes.     

Packaging Cells Based on Inducible Gene Amplification for the Production of Adeno-Associated Virus Vectors

Although vectors based on adeno-associated virus (AAV) offer several unique advantages, their usage has been hampered by the difficulties encountered in vector production. In this report, we describe a new AAV packaging system based on inducible amplification of integrated helper and vector constructs containing the simian virus 40 (SV40) replication origin. The packaging and producer cell lines developed express SV40 T antigen under the control of the reverse tetracycline transactivator system, which allows inducible amplification of chromosomal loci linked to the SV40 origin. Culturing these cells in the presence of doxycycline followed by adenovirus infection resulted in helper and vector gene amplification as well as higher vector titers. Clonal producer cell lines generated vector titers that were 10 times higher than those obtained by standard methods, with approximately 10⁴ vector particles produced per cell. These stocks were free of detectable replication-competent virus. The lack of a transfection step combined with the reproducibility of stable producer lines makes this packaging method ideally suited for the large-scale production of vector stocks for human gene therapy.     

新型重组AAV5/5载体及包装系统

本研究组建了一种可用于规模化生产的以重组单纯疱疹病毒为辅助病毒的AAV5/5载体包装系统。首先,将5型腺相关病毒 (AAV5) 的rep和cap基因插入I型单纯疱疹病毒 (HSV-1) 基因组非必需基因UL2中,获得重组病毒rHSV1-rep5cap5。其次,构建一种携带AAV5 ITR的通用型载体质粒pAAV5neo,将报告基因EGFP插入pAAV5neo中,得到pAAV5neo-EGFP质粒。将pAAV5neo-EGFP质粒导入BHK-21细胞,用G418选择培养,挑选出表达EGFP并在重组病毒rHSV1-rep5cap5感染下能高效产生rAAV5/5-EGFP的单克隆载体细胞株C020。用rHSV1-rep5cap5感染C020细胞制备rAAV5/5-EGFP,用“氯仿处理-聚乙二醇/氯化钠-氯仿抽提”方法粗纯化rAAV5/5-EGFP。用100 kDa分子量截流超滤方法进一步纯化和浓缩,获得高纯度的rAAV5-EGFP。SDS-PAGE电泳分析可见3条特征性外壳蛋白带。电镜分析显示病毒颗粒以实心颗粒为主。用rAAV5/5-EGFP病毒按1×105 vg/cell感染体外培养的HEK293细胞,可见30％细胞呈现绿色荧光。本研究提出了一种高效AAV5/5载体生产系统和纯化方法,为重组AAV5载体的进一步应用提供了基础。     

Packaging cell lines for simian foamy virus type 1 vectors

Foamy viruses are nonpathogenic retroviruses that offer several unique opportunities for gene transfer in various cell types from different species. We have previously demonstrated the utility of simian foamy virus type 1 (SFV-1) as a vector system by transient expression assay (M. Wu et al., J. Virol. 72:3451-3454, 1998). In this report, we describe the first stable packaging cell lines for foamy virus vectors based on SFV-1. We developed two packaging cell lines in which the helper DNA is placed under the control of either a constitutive cytomegalovirus (CMV) immediate-early gene or inducible tetracycline promoter for expression. Although the constitutive packaging expressing cell line had a higher copy number of packaging DNA, the inducible packaging cell line produced four times more vector particles. This result suggested that the structural gene products in the constitutively expressing packaging cell line were expressed at a level that is not toxic to the cells, and thus vector production was reduced. The SFV-1 vector in the presence of vesicular stomatitis virus envelope protein G (VSV-G) produced an insignificant level of transduction, indicating that foamy viruses could not be pseudotyped with VSV-G to generate high-titer vectors. The availability of stable packaging cell lines represents a step toward the use of an SFV-1 vector delivery system that will allow scaled-up production of vector stocks for gene therapy.     

A small and efficient dimerization/packaging signal of rat VL30 RNA and its use in murine leukemia virus-VL30-derived vectors for gene transfer.

Retroviral genomes consist of two identical RNA molecules associated at their 5' ends by the dimer linkage structure located in the packaging element (Psi or E) necessary for RNA dimerization in vitro and packaging in vivo. In murine leukemia virus (MLV)-derived vectors designed for gene transfer, the Psi + sequence of 600 nucleotides directs the packaging of recombinant RNAs into MLV virions produced by helper cells. By using in vitro RNA dimerization as a screening system, a sequence of rat VL30 RNA located next to the 5' end of the Harvey mouse sarcoma virus genome and as small as 67 nucleotides was found to form stable dimeric RNA. In addition, a purine-rich sequence located at the 5' end of this VL30 RNA seems to be critical for RNA dimerization. When this VL30 element was extended by 107 nucleotides at its 3' end and inserted into an MLV-derived vector lacking MLV Psi +, it directed the efficient encapsidation of recombinant RNAs into MLV virions. Because this VL30 packaging signal is smaller and more efficient in packaging recombinant RNAs than the MLV Psi + and does not contain gag or glyco-gag coding sequences, its use in MLV-derived vectors should render even more unlikely recombinations which could generate replication-competent viruses. Therefore, utilization of the rat VL30 packaging sequence should improve the biological safety of MLV vectors for human gene transfer.     

HSV-1 amplicon vectors are a highly efficient gene delivery system for skeletal muscle myoblasts and myotubes

Analysis of RyR1 structure function inmuscle cells is made difficult by the low (<5%) transfectionefficiencies of myoblasts or myotubes using calcium phosphate orcationic lipid techniques. We inserted the full-length 15.3-kb RyR1cDNA into a herpes simplex virus type 1 (HSV-1) amplicon vector,pHSVPrPUC between the ori/IE 4/5 promoter sequence and theHSV-1 DNA cleavage/packaging signal (pac). pHSVGN andpHSVGRyR1, two amplicons that expressed green fluorescent protein, wereused for fluorescence-activated cell sorter analysis of transductionefficiency. All amplicons were packaged into HSV-1 virusparticles using a helper virus-free packaging system and yielded10⁶ transducing vector units/ml. HSVRyR1, HSVGRyR1, andHSVGN virions efficiently transduced mouse myoblasts and myotubes,expressing the desired product in 70-90% of the cells atmultiplicity of infection 5. The transduced cells appeared healthy andRyR1 produced by this method was targeted properly and restoredskeletal excitation-contraction coupling in dyspedic myotubes. Themyotubes produced sufficient protein to allow single-channel analysesfrom as few as 10 100-mm dishes. In most cases this method couldpreclude the need for permanent transfectants for the study of RyR1structure function.