Optimization of Pseudomonas cepacia lipase preparations for catalysis in organic solvents

The activity of different lipase (from Pseudomonas cepacia) forms, such as crude powder (crude PC), purified and lyophilized with PEG (PEG + PC), covalently linked to PEG (PEG-PC), cross-linked enzyme crystals (CLEC-PC), and immobilized in Sol-Gel-AK (Sol-Gel-AK-PC) was determined, at various water activities (aw), in carbon tetrachloride, benzene and 1,4-dioxane. The reaction of vinyl butyrate with 1-octanol was employed as a model and both transesterification (formation of 1-octyl butyrate) and hydrolysis (formation of butyric acid from vinyl butyrate) rates were determined. Both rates depended on the lipase form, solvent employed, and aw value. Hydrolysis rates always increased as a function of aw, while the optimum of aw for transesterification depended on the enzyme form and nature of the solvent. At proper aw, some lipase forms such as PEG + PC, PEG-PC, and Sol-Gel-AK-PC had a total activity in organic solvents (transesterification plus hydrolysis) which was close to (39 and 48%) or even higher than (130%) that displayed by the same amount of lipase protein in the hydrolysis of tributyrin-one of the substrates most commonly used as standard for the assay of lipase activity-in aqueous buffer. Instead, CLEC-PC and crude PC were much less active in organic solvents (2 and 12%) than in buffer. The results suggest that enzyme dispersion and/or proper enzyme conformation (favored by interaction with PEG or the hydrophobic Sol-Gel-AK matrix) are essential for the expression of high lipase activity in organic media.     

Immobilization of Mucor javanicus lipase on effectively functionalized silica nanoparticles

Mucor javanicus lipase was effectively immobilized on silica nanoparticles which were prepared by Stöber method. Glycidyl methacrylate (GMA), which bears a reactive epoxide group, was incorporated onto the surface of the nanoparticles and the epoxide groups were directly used for multipoint coupling of the enzyme. We also introduced amine residues by coupling ethylene diamine (EDA) to the epoxide group of GMA. M. javanicus lipase was covalently immobilized onto the amine-activated silica nanoparticles by using glutaraldehyde (GA) or 1,4 phenylene diisothiocyanate (NCS) as a coupling agent. The lipase loading capacities of the EDA-GA and EDA-NCS nanoparticles (81.3 and 60.9 mg g⁻¹, respectively) were much higher than that of the unmodified GMA nanoparticles (18.9 mg g⁻¹). The relative hydrolytic activities in an aqueous medium of the lipases immobilized on EDA-GA and EDA-NCS attached silica nanoparticles (115% and 107%, respectively) were significantly high and almost in the same range with the free enzyme. This may be due to the improvement of the enzyme–substrate interaction by avoiding the potential aggregation of free lipase molecules. The immobilized lipases were also more resistant to temperature inactivation than the free form. This work demonstrates that the size-controlled silica nanoparticles can be efficiently employed as host materials for enzyme immobilization leading to high activity and stability of the immobilized enzymes.     

Activation of immobilized lipase in non-aqueous systems by hydrophobic poly-DL-tryptophan tethers

Many industrially important reactions use immobilized enzymes in non-aqueous, organic systems, particularly for the production of chiral compounds such as pharmaceutical precursors. The addition of a spacer molecule ("tether") between a supporting surface and enzyme often substantially improves the activity and stability of enzymes in aqueous solution. Most "long" linkers (e.g., polyethylene oxide derivatives) are relatively hydrophilic, improving the solubility of the linker-enzyme conjugate in polar environments, but this provides little benefit in non-polar environments such as organic solvents. We present a novel method for the covalent immobilization of enzymes on solid surfaces using a long, hydrophobic polytryptophan tether. Candida antarctica lipase B (CALB) was covalently immobilized on non-porous, functionalized 1-microm silica microspheres, with and without an intervening hydrophobic poly-DL-tryptophan tether (n approximately 78). The polytryptophan-tethered enzyme exhibited 35 times greater esterification of n-propanol with lauric acid in the organic phase and five times the hydrolytic activity against p-nitrophenol palmitate, compared to the activity of the same enzyme immobilized without tethers. In addition, the hydrophobic tethers caused the silica microspheres to disperse more readily in the organic phase, while the surface-immobilized control treatment was less lipophilic and quickly settled out of the organic phase when the suspensions were not vigorously mixed.     

Covalent-bonded immobilization of lipase on poly(phenylene sulfide) dendrimers and their hydrolysis ability

Covalent-bonded immobilization of lipase from burkholderia cepacia onto two poly(phenylene sulfide) (PPS) dendrimers with different generations (two and three) was achieved using carbodiimide as a coupling reagent. The hydrolysis activity of olive oil to fatty acid was studied on enzyme-immobilized PPS dendrimers. Enzyme activity was proportional to the enzyme loading, and highest recovered activity was obtained at the medium enzyme loading for both G2 and G3 dendrimers. The immobilization improved the optimum pH and caused the temperature range to widen. Immobilization of enzyme has enhanced the thermal stability of enzyme activity in comparison with free enzyme. The immobilized enzyme as a biocatalyst for batch hydrolysis of olive oil retained 80 approximately 90% activity even after 20 times of recycling. This retention of activity after recycle is very valuable and powerful in enzyme technology. The present noteworthy and vital availability on enzyme reaction of the covalently bonded immobilized lipase on dendrimer came from the structure of dendrimer with a large number of functional terminal groups, which are easily available for immobilization of many lipases at the situation keeping reactive enzymes on the surface of dendrimer.     

The use of crude lipase in deprotection of C-terminal protecting groups

A crude lipase, Newlase F, was used to remove C-terminal protecting groups from dipeptide esters. Hydrolysis of dipeptide n-heptyl esters with Newlase F was conducted in aqueous media containing acetonitrile. The optimum pH and temperature of lipase in Newlase F were 7.0 and 30 °C, respectively. Low level acetonitrile promoted the hydrolysis of dipeptide n-heptyl esters, while high level acetonitrile inhibited the hydrolysis. However, the protease activity in Newlase F was significantly inhibited by acetonitrile. Lipase in Newlase F worked better in a medium containing water-miscible organic solvents than in water-immiscible ones. N-terminal protecting groups were not affected by the protease in the crude enzyme. It was found that the protease in Newlase F did not hydrolyze amide bond with hydrophilic amino acids on either side under these conditions (pH 7.0, room temperature). Newlase F may consequently be used widely in the synthesis of peptide conjugates. The crude enzyme was immobilized on SBA-15 mesoporous molecular sieve. The lipase activity of immobilized preparation was more active on hydrolysis of C-terminal protecting groups and stable than the free enzyme. The immobilization also reduced the protease activity.     

Immobilization of Lipase from Mucor Miehei Onto Poly (Ethylene) Based Graft Copolymers

Lipase from Mucor miehei was immobilized covalently onto hydrolyzed poly(ethylene)-g.co-hydroxyethyl methacrylate (PE-HEMA). This hydrolysis of the copolymer was achieved using 0.1 M NaOH over different periods of time, under controlled conditions. The graft copolymers and their hydrolyzed equivalents were characterized by scanning electron microscopy (SEM) and by differential scanning calorimetry analysis (DSC). Water sorption studies were undertaken to provide a measure of relative hydrophobicity of the samples.

The lipase immobilization reaction was studied in order to assess the effects of controlling various important parameters. These include the nature of the buffering medium, the time over which the immobilization was allowed to occur, the concentration of the activating and coupling agent used (CMC) and the concentration of enzyme employed during attempts at effective immobilization. The immobilized lipase was used in the hydrolysis of triolein (glycerol trioleate). From this study, the apparent K_M, the optimum pH for hydrolysis and the optimum temperature for hydrolysis were revealed.

The suitability of hydrolyzed poly(ethylene)-g.co-HEMA as a support in the immobilization of lipase was assessed by determination of the amount of lipase coupled to the support and by assessment of the retention of activity of the immobilized lipase after its exposure to the immobilization reagents, procedure and conditions.     

Lipase-catalyzed kinetic resolution of (R,S)-1-phenylethyl propionate in an enzyme membrane reactor

Enzymatic stereoselective hydrolysis of (R,S)-1-phenylethyl propionate was performed in a stirred tank and in a biphasic enzyme membrane reactor. Lipase from Pseudomonas sp. was proved to be a good enantioselective catalyst for this reaction. The enzyme was covalently immobilized in a porous polyamide membrane (flat sheet as well as hollow-fibres) via glutaraldehyde. An influence of membrane hydrophobicity on reactor performance was observed. Initial lipase activity and productivity in the processes were equal to 1.05 × 10^?4, 1.3 × 10^?5 and 1.0 × 10^?5 mole/(h × mg of enzyme) in the case of native lipase, in the aromatic polyamide hydrophobic membrane reactor and in the hydrophilic polyamide-6 membrane reactor, respectively. The influence of some factors such as temperature, pH, buffer concentration, initial substrate concentration and addition of β-cyclodextrin derivatives on reaction rate and enantioselectivity was investigated and discussed. In the enzyme membrane reactor both organic and aqueous phases circulated countercurrently on both sides of the membrane. At a conversion degree of under 55–60%, pure enantiomer of the remaining ester (i.e. > 98%) was obtained.     

Macroporous and hydrophilic polymer resins modified with isothiocyanate groups for immobilization of enzymes

Hydrophilic and macroporous polymer resins composed of glycerylmethacrylate, styrene, and divinylbenzene were quite easily modified with isothiocyanate groups using a Friedel-Crafts reaction with 3-chloropropionyl chloride and subsequent nucleophilic reaction with KSCN. Alkaline phosphatase and trypsin could be covalently bound to the isothiocyanate-carrying polymer resins, and the immobilized enzymes obtained were sufficiently active and stable due to a covalent bonding via a spacer group between the carrier resins and the enzymes and also due to a hydrophilic environment around the enzymes. A heterogeneity of the immobilized enzyme was taken into account to interpret the thermal denaturation process of the enzyme immobilized onto the resins.     

Immobilization of lipase from Pseudomonas fluorescens on glyoxyl-octyl-agarose beads: Improved stability and reusability

The lipase from Pseudomonas fluorescens (PFL) has been immobilized on glyoxyl-octyl agarose and compared to the enzyme immobilized on octyl-agarose. Thus, PFL was immobilized at pH 7 on glyoxyl-octyl support via lipase interfacial activation and later incubated at pH 10.5 for 20 h before reduction to get some enzyme-support covalent bonds. This permitted for 70% of the enzyme molecules to become covalently attached to the support. This biocatalyst was slightly more stable than the octyl-PFL at pH 5, 7 and 9, or in the presence of some organic solvents (stabilization factor no higher than 2). The presence of phosphate anions produced enzyme destabilization, partially prevented by the immobilization on glyoxyl-octyl (stabilization factor became 4). In contrast, the presence of calcium cations promoted a great PFLstabilization, higher in the case of the glyoxyl-octyl preparation (that remained 100% active when the octyl-PFL preparations had lost 20% of the activity). However, it is in the operational stability where the new biocatalyst showed the advantages: in the hydrolysis of 1 M triacetin in 60% 1.4 dioxane, the octyl biocatalyst released >60% of the enzyme in the first cycle, while the covalently attached enzyme retained its full activity after 5 reaction cycles.     

Efficient immobilization of lipases by entrapment in hydrophobic sol-gel materials

The commercial application of lipases as biocatalysts for organic synthesis requires simple but efficient methods to immobilize the enzyme, yielding highly stable and active biocatalysts which are easy to recover. In this study, we present a novel method to achieve lipase immobilization by entrapment in chemically inert hydrophobic silica gels which are prepared by hydrolysis of alkyl-substituted silanes in the presence of the enzyme. A typical immobilization procedure uses: an aqueous solution of lipase; sodium fluoride as a catalyst; and additives like polyvinyl alcohol or proteins and alkoxysilane derivatives like RSi-(OMe)(3) with R = alkyl, aryl, or alkoxy as gel precursors. The effect of various immobilization parameters like stoichiometric ratio of water, silane, type and amount of additive, type and amount of catalyst, and type of silane has been carefully studied. The new method is applicable for a wide variety of lipases, yielding immobilized lipases with esterification activities enhanced by a factor of up to 88, compared to the commercial enzyme powders under identical conditions. Studies on the stability of sol-gel immobilized lipases under reaction conditions or storage (dry, in aqueous or organic medium) revealed an excellent retention of enzymatic activity. The possible reasons for the increased enzyme activities are discussed. (c) 1996 John Wiley & Sons, Inc.     

Properties of an immobilized lipase of Bacillus coagulans BTS-1

Lipase (EC 3.1.1.3) is a tri-acylglycerol ester hydrolase, catalysing the hydrolysis of tri-, di-, and mono-acylglycerols to glycerol and fatty acids. To study the effect of adsorption of a lipase obtained from Bacillus coagulans BTS-1, its lipase was immobilized on native and activated (alkylated) matrices, i.e. silica and celite. The effect of pH, temperature, detergents, substrates, alcohols, organic solvent etc. on the stability of the immobilized enzyme was evaluated. The gluteraldahyde or formaldehyde (at 1% and 2% concentration, v/v) activated matrix was exposed to the Tris buffered lipase. The enzyme was adsorbed/entrapped more rapidly on to the activated silica than on the activated celite. The immobilized lipase showed optimal activity at 50 degrees C following one-hour incubation. The lipase was specifically more hydrolytic to the medium C-length ester (p-nitro phenyl caprylate than p-nitro phenyl laurate). The immobilization/entrapment enhanced the stability of the lipase at a relatively higher temperature (50 degrees C) and also promoted enzyme activity at an acidic pH (pH 5.5). Moreover, the immobilized lipase was quite resistant to the denaturing effect of SDS.     

Preparation and characterization of urease immobilized onto porous chitosan beads for urea hydrolysis

Urease was covalently immobilized onto porous chitosan beads via primary amine groups connected to the backbone via a six-carbon linear alkyl spacer. The optimum conditions for enzyme immobilization are activating the beads with 1%(w/w) glutaraldehyde, reacting the activated beads in pH 7 buffer with the enzyme, using an enzyme to bead weight ratio of 25, and without lyophilization. Chitosan-bound urease was found to fully retain its specific activity. Properties of the immobilized urease were characterized under batch and flow conditions. Increased optimum reaction temperature, enhanced thermal stability and storage stability, and excellent reusability were found after enzyme immobilization. Continuous hydrolysis of urea solution was studied in a column packed with the enzyme-containing beads for its possible application in regenerating dialysate solution during hemodialysis.     

Asymmetric ammonolysis of (R/S)-mandelic acid by immobilized lipases via direct amidation of mandelic acid in biphasic media

Abstract

We have investigated the direct enantioselective amidation of mandelic acid with ammonia, catalyzed by a variety of commercial lipases including those from Candida rugosa, Mucor miehei, Pseudomonas sp., Rhizomucor miehei, and Thermomyces lanuginosus covalently immobilized onto Florisil^® support via glutaraldehyde and polysuccinimide spacer arms. All the immobilized lipase preparations tested preferentially amidated the R isomer of mandelic acid. The highest amide yields were obtained for immobilized Pseudomonas sp. lipase preparations under the optimized reaction conditions. After 24 h of amidation, the reaction had proceeded with an excellent yield (50%) and enantiopurity (> 99%). The immobilized Pseudomonas sp. lipase preparations catalyzed the amidation reaction with the same yield and enantioselectivity. The enzyme immobilized via a glutaraldehyde spacer arm showed better reusability than that immobilized via a polysuccinimide spacer arm.

In view of these results, it is revealed that the direct amidation of mandelic acid catalyzed by the immobilized Pseudomonas sp. lipases is a facile and effective methodology for obtaining (S)-mandelic acid and (R)-mandelamide.     

Crosslinked aggregates of Rhizopus oryzae lipase as industrial biocatalysts: Preparation, optimization, characterization, and application for enantioselective resolution reactions

Lipase from Rhizopus oryzae (ROL) was immobilized as crosslinked enzyme aggregate (CLEA) via precipitation with ammonium sulfate and simultaneous crosslinking with glutaraldehyde. The optimum conditions of the immobilization process were determined. Lipase CLEAs showed a twofold increase in activity when Tween 80‐pretreated lipase was used for CLEA preparation. CLEAs were shown to have several advantages compared to free lipase. CLEAs were more stable at 50°C and 60°C as well as for a wide range of pH. After incubation at 50°C, CLEA showed 74% of initial activity whereas free enzyme was totally inactivated. Reduction of Schiff bases has been performed for the first time in the CLEA preparation process significantly improving the chemically modified CLEAs' reusability, thus providing an enzyme with high potential for recycling even under aqueous reaction conditions where enzyme leakage is, in general, one of the major problems. The CLEA retained 91% activity after 10 cycles in aqueous medium. The immobilized enzyme was used for kinetic resolution reactions. Results showed that immobilization had an enhancing effect on the conversion (c) as well as on the enantiomeric ratio (E). ROL CLEA displayed five times higher enantioselectivity for the hydrolysis of (R,S)‐1‐phenylethyl acetate and likewise 1.5 times higher enantioselectivity for the transesterification of racemic (R–S)‐1‐phenylethanol with vinylacetate. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 28: 937–945, 2012 This article was published online on June 26, 2012. An edit was subsequently requested. This notice is included in the online and print versions to indicate that both have been corrected [27 June 2012].     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Lipase immobilization on magnetic microspheres via spacer arms: Effect of steric hindrance on the activity

Poly(styrene-acrylic acid) magnetic microspheres with an average diameter of 2 μm were successfully prepared and used as carriers to immobilize lipase. Lipase immobilized on microspheres with no spacer arm exhibited low activities, which were attributed to steric hindrance on the lipase conformation. To avoid steric effects, ethylenediamine and poly(ethylene glycol) (PEG) 400/800/4000 were utilized as spacer arms to bind the lipase to the microspheres. The immobilized lipase activities were improved using PEG 800/4000 as a spacer arm. Furthermore, the influence of enzyme loading on lipase activity was investigated, and the results indicated that enzyme overloading could exert steric effect on lipase activity. The degree of PEG modification was demonstrated to affect lipase activity because excess PEG on the surface of microspheres could interact with lipase due to its mobility, consequently reducing lipase activity.     

Immobilization of Candida rugosa lipase on glass beads for enantioselective hydrolysis of racemic Naproxen methyl ester

Candida rugosa lipase (CRL) was immobilized on glutaraldehyde-activated aminopropyl glass beads by using covalent binding method or sol-gel encapsulation procedure and improved considerably by fluoride-catalyzed hydrolysis of mixtures of RSi(OCH₃)₃ and Si(OCH₃)₄. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e. the hydrolysis of p-nitrophenylpalmitate (p-NPP). It has been observed that the percent activity yield of the encapsulated lipase was 166.9, which is 5.5 times higher than that of the covalently immobilized lipase. The enantioselective hydrolysis of racemic Naproxen methyl ester by immobilized lipase was studied in aqueous buffer solution/isooctane reaction system and it was noticed that particularly, the glass beads based encapsulated lipases had higher conversion and enantioselectivity compared to covalently immobilized lipase. In short, the study confirms an excellent enantioselectivity (E > 400) for the encapsulated lipase with an ee value of 98% for S-Naproxen.     

Immobilization of lipase from Candida rugosa on Eupergit C supports by covalent attachment

The present study compares the results of three different covalent immobilization methods employed for immobilization of lipase from Candida rugosa on Eupergit^® C supports with respect to enzyme loadings, activities and coupling yields. It seems that method yielding the highest activity retention of 43.3% is based on coupling lipase via its carbohydrate moiety previously modified by periodate oxidation. Study of thermal deactivation kinetics at three temperatures (37, 50 and 75 °C) revealed that the immobilization method also produces an appreciable stabilization of the biocatalyst, changing its thermal deactivation profile. By comparison of the t_1/2 values obtained at 75 °C, it can be concluded that the lipase immobilized via carbohydrate moiety was almost 2-fold more stable than conventionally immobilized one and 18-fold than free lipase. The immobilization procedure developed is quite simple, and easily reproduced, and provides a promising solution for application of lipase in aqueous and microaqueous reaction system.     

Evaluation of cellulose-binding domain fused to a lipase for the lipase immobilization

A cellulose-binding domain (CBD) fragment of a cellulase gene of Trichoderma hazianum was fused to a lipase gene of Bacillus stearothermophilus L1 to make a gene cluster for CBD-BSL lipase. The specific activity of CBD-BSL lipase for oil hydrolysis increased by 33% after being immobilized on Avicel (microcrystalline cellulose), whereas those of CBD-BSL lipase and BSL lipase decreased by 16% and 54%, respectively, after being immobilized on silica gel. Although the loss of activity of an enzyme immobilized by adsorption has been reported previously, the loss of activity of the CBD-BSL lipase immobilized on Avicel was less than 3% after 12 h due to the irreversible binding of CBD to Avicel.     

Immobilization of lipase for effective interesterification of fats and oils in organic solvent

In order to investigate quantitatively the interesterification reaction, triolein and stearic acid were used as substrates and eight commercially available lipases were tested for their suitability for the reaction. Three fungal lipase preparations were found to be suitable. The hydrolytic activity of the commercial lipases was tested with olive oil, and it 2was noted that there was no correlation between their hydrolytic and interesterification activities. Among the lipases tested, Mucor miehei lipase was chosen for further study because of it high protein content and its relatively high hydrolytic and interesterification activities, both of which are required for effective interesterification. The effect of water activity of the interesterification reaction was investigated. interesterification activity was shown to be maximum at the water activity of 0.25. As the water activity of the lipase increased, hydrolysis of triglyceride was accelerated. At zero water activity, high conversion was achieved, although interesterification activity was relatively lower than that at the water activity of 0.25. A new and simple immobilization method was developed in order to render hydrophobicity to the lipase and hence to improve the interesterification activity of the lipase. The lipase was immobilized covalently with glutaraldehyde or with six alkyl chains as spacers onto Florisil (magnesium silicate, a inorganic matrix). Interesterification activity of the immobilized lipase with the hydrophobic spacers were increased against that of re lipase. The increase of activity was up to 8-fold that of the original activity of free lipase when the spacer was 7-aminoheptanoic acids. Relatively high stability of the immobilized lipase was shown in a continuous packed bed column reactor with a half-life of 97 days. (c) 1993 John Wiley & Sons, Inc.