Modulation of HIV-1 integrase activity by single-stranded oligonucleotides and their conjugates with eosin

Integration of the DNA copy of the genomic RNA into an infected cell genome is one of the key steps of the replication cycle of all retroviruses. It is catalyzed by the viral enzyme, integrase. We have shown that conjugates of short single-stranded oligonucleotides with eosin efficiently inhibit the catalytic activity of the HIV-1 integrase. In this article, we have found that the dependence of the integrase catalytic activity on the concentration of oligonucleotides has a bell-shaped pattern. The modulation of HIV-1 integrase activity correlated with the oligonucleotide length and was not associated with specific sequences. Moreover, a similar mode of the oligonucleotide action was found for integrase from the prototype foamy virus. This dual effect of the oligonucleotide and their conjugates with eosin might be explained by their binding with retroviral integrase in two different sites; the oligodeoxynucleotide binding in the first site results in integrase activation, whereas interactions with another one lead to inhibition of the enzyme activity. Eosin coupling to oligonucleotides did not change the mode of their action but enhanced their affinity to both binding sites. The affinity increase was found to be much more important for the site responsible for the integrase inhibition, thus explaining the high inhibitory potency of oligonucleotide-eosin conjugates.     

HIV-1 integrase inhibition by modified oligonucleotides: optimization of the inhibitor structure

Integration of human immunodeficiency virus type 1 DNA into the infected cell genome is one of the key steps of the viral replication cycle. Therefore viral enzyme integrase, which realizes the integration, is of interest as a target for new antiviral drugs. Conjugates of 11-mer single stranded oligonucleotides with hydrophobic molecules are shown to be efficient integrase inhibitors since they induce dissociation of the integrase-viral DNA complex. The effect of the oligonucleotide length and structure as well as the structure of hydrophobic molecules on the conjugate inhibitory activity has been studied. Conjugates with eosin and oleic acid are shown to be the most active. Conjugates of these molecules with 2'-O-methyl-oligonucleotide inhibit integrase at 50-100 nM and have no influence on a number of other DNA-binding enzymes.     

Study on the interactions between diketo-acid inhibitors and prototype foamy virus integrase-DNA complex via molecular docking and comparative molecular dynamics simulation methods

Human immunodeficiency virus type 1 (HIV-1) integrase (IN) is an important drug target for anti-acquired immune deficiency disease (AIDS) treatment and diketo-acid (DKA) inhibitors are potent and selective inhibitors of HIV-1 IN. Due to lack of three-dimensional structures including detail interactions between HIV-1 IN and its substrate viral DNA, the drug design and screening platform remains incompleteness and deficient. In addition, the action mechanism of DKA inhibitors with HIV-1 IN is not well understood. In view of the high homology between the structure of prototype foamy virus (PFV) IN and that of HIV-1 IN, we used PFV IN as a surrogate model for HIV-1 IN to investigate the inhibitory mechanism of raltegravir (RLV) and the binding modes with a series of DKA inhibitors. Firstly, molecular dynamics simulations of PFV IN, IN-RLV, IN-DNA, and IN-DNA-RLV systems were performed for 10?ns each. The interactions and inhibitory mechanism of RLV to PFV IN were explored through overall dynamics behaviors, catalytic loop conformation distribution, and hydrogen bond network analysis. The results show that the coordinated interactions of RLV with IN and viral DNA slightly reduce the flexibility of catalytic loop region of IN, and remarkably restrict the mobility of the CA end of viral DNA, which may lead to the partial loss of the inhibitory activity of IN. Then, we docked a series of DKA inhibitors into PFV IN-DNA receptor and obtained the IN-DNA-inhibitor complexes. The docking results between PFV IN-DNA and DKA inhibitors agree well with the corresponding complex of HIV-1 IN, which proves the dependability of PFV IN-DNA used for the anti-AIDS drug screening. Our study may help to make clear some theoretical questions and to design anti-AIDS drug based on the structure of IN.     

Disruption of HIV-1 integrase-DNA complexes by short 6-oxocytosine-containing oligonucleotides

We recently found that oligonucleotides containing the 6-oxocytosine heterocyclic base are efficient inhibitors of the HIV-1 integrase in vitro [Brodin, P., et al. (2001) Nucleosides Nucleotides Nucleic Acids 20, 481-486]. In this report, we demonstrate that the inhibition arises from a noncompetitive mechanism in which the modified oligonucleotide attacks the integrase-DNA complex, leading to its active disruption. This conclusion is based on the following results. First, despite the fact that the respective affinities of a 6-oxocytosine-containing oligonucleotide and of its nonmodified counterpart for integrase were identical, only the modified compound inhibited the enzyme activities. Second, DNA binding and UV cross-linking assays indicated that the 6-oxocytosine-containing oligonucleotide prevented the formation of a stable integrase-DNA complex. Third, the kinetics of the dissociation of the integrase-DNA complex were dramatically accelerated in the presence of the modified ODN, whereas the nonmodified counterpart did not influence the dissociation. This mechanism was supported by the ability of the 6-oxocytosine-containing oligonucleotide to inhibit the strand transfer activity of HIV-1 preintegration complexes in vitro. Disruption of integrase-DNA complexes by 6-oxocytosine-containing oligonucleotides constitutes an original mechanism of integration inhibition, therefore suggesting a strategy for searching for inhibitors of the HIV-1 preintegration complexes.     

Inhibition of HIV-1 integrase by modified oligonucleotides: Optimization of the inhibitor structure

Integration of human immunodeficiency virus type 1 DNA into the infected cell genome is one of the key steps of the viral replication cycle. Therefore, viral integrase is of interest as a target for new antiviral drugs. Conjugates of 11-mer single-stranded oligonucleotides with hydrophobic molecules were shown to be efficient integrase inhibitors, inducing dissociation of the integrase-viral DNA complex. The dependence of the conjugate inhibitory activity on the oligonucleotide length and structure as well as on the structure of hydrophobic molecules was studied. Conjugates with eosin and oleic acid proved to be the most active. Conjugates of these molecules with 2′-O-methyl-oligonucleotide inhibited integrase at concentrations 50–100 nM but did not influence some other DNA-binding enzymes.     

HIV-1 integrase inhibition by dimeric bisbenzimidazoles with different spacer structures

HIV-1 integrase is responsible for one of the key stages in virus replication, namely, integration of viral cDNA into the host cell genome. Integration inhibition leads to a complete block of the virus replication. We studied the integration inhibition by dimeric bisbenzimidazoles DBBI(7) with heptamethylene and DBBI(8) with tri(ethylene glycol) spacers and found that IC₅₀ for DBBI(7) was approximately 0.03 μM and for DBBI(8) it was approximately 10 μM. Cross-linking assays demonstrated that both compounds interfered with a proper positioning of the DNA substrate in the active centre of integrase. To clarify the inhibition mechanism, dissociation constants were determined for the complexes between DBBI and integrase DNA substrate. Calculated K _d values for the complexes formed by DBBI(7) and DBBI(8) were 270 and 140 nM, respectively. Thus, the integration inhibition is not directly connected with DBBI binding to DNA. The dependence of initial enzymatic reaction rate on DNA substrate concentration in the presence of different concentrations of inhibitors was found, and inhibition constants were determined. These data suggest that different inhibition activity of DBBI(7) and DBBI (8) is determined by different mechanisms underlying their action, namely, competitive inhibition of integrase by DBBI(7) and a more complex mechanism assumed for DBBI(8).     

Identification of HIV-1 integrase inhibitors via three-dimensional database searching using ASV and HIV-1 integrases as targets

Integration of viral DNA into the host cell genome is a critical step in the life cycle of HIV. This essential reaction is catalyzed by integrase (IN) through two steps, 3'-processing and DNA strand transfer. Integrase is an attractive target for drug design because there is no known cellular analogue and integration is essential for successful replication of HIV. A computational three-dimensional (3-D) database search was used to identify novel HIV-1 integrase inhibitors. Starting from the previously identified Y3 (4-acetylamino-5-hydroxynaphthalene-2,7-disulfonic acid) binding site on the avian sarcoma virus integrase (ASV IN), a preliminary search of all compounds in the nonproprietary, open part of the National Cancer Institute 3-D database yielded a collection of 3100 compounds. A more rigorous scoring method was used to rescreen the 3100 compounds against both ASV IN and HIV-1 IN. Twenty-two of those compounds were selected for inhibition assays against HIV-1 IN. Thirteen of the 22 showed inhibitory activity against HIV-1 IN at concentrations less than 200 microM and three of them showed antiviral activities in HIV-1 infected CEM cells with effective concentrations (EC50) ranging from 0.8 to 200 microM. Analysis of the computer-generated binding modes of the active compounds to HIV-1 IN showed that simultaneous interaction with the Y3 site and the catalytic site is possible. In addition, interactions between the active compounds and the flexible loop involved in the binding of DNA by IN are indicated to occur. The structural details and the unique binding motif between the HIV-1 IN and its inhibitors identified in the present work may contribute to the future development of IN inhibitors.     

Dissecting Tn5 transposition using HIV-1 integrase diketoacid inhibitors

Diketoacid (DKA) compounds have been shown to inhibit HIV-1 integrase by a mechanism that involves sequestration of the active site metals. Because HIV-1 integrase and Tn5 transposase have similar active site architectures and catalytic mechanisms, we investigated whether DKA analogues would inhibit Tn5 transposase activity and provide a model system to explore the mechanisms of action of these inhibitors. A screen of several hundred DKA analogues identified several with activity against Tn5 Tnp. Six DKA inhibitors used in this study manifested a variety of effects on different transposition steps suggesting that different analogues may have different binding contacts with transposase. All DKA compounds inhibited paired end complex (PEC) formation in which the nucleoprotein complex required for catalysis is assembled. Dissociation of PECs by some DKA compounds indicates that these inhibitors can decrease PEC stability. Four DKA compounds inhibited the two cleavage steps releasing transposon DNA from flanking DNA, and one of these four compounds preferentially inhibited the second cleavage step. The differential effect of this inhibitor on the second cleavage event indicates that cleavage of the two transposon-donor DNA boundaries is a sequential process requiring a conformational change. The requirement for a conformational change between cleavage events was also demonstrated by the inability of transposase to perform second cleavage at 25 degrees C. Finally, all six compounds inhibit strand transfer, the final step of Tn5 transposition. Two of the compounds that inhibited strand transfer have no effect on DNA cleavage. The strand transfer inhibition properties of various DKA compounds was sensitive to the structure of the 5'-non-transferred strand, suggesting that these compounds bind in or near the transposase active site. Other results that probe compound binding sites include the effects of active site mutations and donor DNA on DKA compound inhibition activities. Thus, DKA inhibitors will provide an important set of tools to investigate the mechanism of action of transposases and integrases.     

Modeling, analysis, and validation of a novel HIV integrase structure provide insights into the binding modes of potent integrase inhibitors

It has been shown that L-731988, a potent integrase inhibitor, targets a conformation of the integrase enzyme formed when complexed to viral DNA, with the 3′-end dinucleotide already cleaved. It has also been shown that diketo acid inhibitors bind to the strand transfer complex of integrase and are competitive with the host target DNA. However, published X-ray structures of HIV integrase do not include the DNA; thus, there is a need to develop a model representing the strand transfer complex. In this study, we have constructed an active-site model of the HIV-1 integrase complexed with viral DNA using the crystal structure of DNA-bound transposase and have identified a binding mode for inhibitors. This proposed binding mechanism for integrase inhibitors involves interaction with a specific Mg^2 + in the active site, accentuated by a hydrophobic interaction in a cavity formed by a flexible loop upon DNA binding. We further validated the integrase active-site model by selectively mutating key residues predicted to play an important role in the binding of inhibitors. Thus, we have a binding model that is applicable to a wide range of potent integrase inhibitors and is consistent with the available resistant mutation data.     

Human immunodeficiency virus type 1 integrase: effects of mutations on viral ability to integrate, direct viral gene expression from unintegrated viral DNA templates, and sustain viral propagation in primary cells.

Integrase is the only viral protein necessary for integration of retroviral DNA into chromosomal DNA of the host cell. Biochemical analysis of human immunodeficiency virus type 1 (HIV-1) integrase with purified protein and synthetic DNA substrates has revealed extensive information regarding the mechanism of action of the enzyme, as well as identification of critical residues and functional domains. Since in vitro reactions are carried out in the absence of other viral proteins and they analyze strand transfer of only one end of the donor substrate, they do not define completely the process of integration as it occurs during the course of viral infection. In an effort to further understand the role of integrase during viral infection, we initially constructed a panel of 24 HIV-1 mutants with specific alanine substitutions throughout the integrase coding region and analyzed them in a human T-cell line infection. Of these mutant viruses, 12 were capable of sustained viral replication, 11 were replication defective, and 1 was temperature sensitive for viral growth. The replication defective viruses express and correctly process the integrase and Gag proteins. Using this panel of mutants and an additional set of 18 mutant viruses, we identified nine amino acids which, when replaced with alanine, destroy integrase activity. Although none of the replication-defective mutants are able to integrate into the host genome, a subset of them with alterations in the catalytic triad are capable of Tat-mediated transactivation of an indicator gene linked to the viral long terminal repeat promoter. We present evidence that integration of the HIV-1 provirus is essential not only for productive infection of T cells but also for virus passage in both cultured peripheral blood lymphocytes and macrophage cells.     

Inhibition of HIV-1 integrase dimerization and activity with crosslinked interfacial peptides

Alternative modes of inhibition for the design of anti-HIV therapies are sought due to the resistance of HIV to a number of the currently approved drugs. A non-active site strategy for generating potent inhibitors of HIV-1 integrase is described based on blocking protein association. Peptides α5 and α6 derived from the HIV-1 integrase dimeric interface have previously demonstrated efficacious dimerization inhibition of HIV-1 integrase. Due to the proximity of the termini of these peptides within the integrase structure, a focused library of tethered agents was designed based on crosslinking the peptides α5 and α6 to mimic a larger interfacial region. The best crosslinked inhibitors are approximately five-fold more potent against HIV-1 integrase than the individual peptides alone or in combination. The most active agents have an inhibitory constant in the mid-nM range and function via a dissociative mechanism of inhibition.     

Insight into the inhibitory mechanism and binding mode between D77 and HIV-1 integrase by molecular modeling methods

Integrase is an essential enzyme in the life cycle of Human immunoficiency virus type 1 (HIV-1) and also an important target for designing integrase inhibitors. In this paper, the binding modes between the wild type integrase core domain (ICD) and the W131A mutant ICD with the benzoic acid derivative--D77 were investigated using the molecular docking combined with molecular dynamics (MD) simulations. The result of MD simulations showed that the W131A substitution affected the flexibility of the region 150-167 in both the monomer A and B of the mutant type ICD. In principle, D77 interacted with the residues around the Lens Epithelium-Derived Growth Factor (LEDGF/p75) binding site which is nearby the HIV-1 integrase dimer interface. However, the specific binding modes for D77-wild type integrase and D77-mutant integrase systems are various. According to the binding mode of D77 with the wild type ICD, D77 can effectively intervene with the binding of LEDGF/p75 to integrase due to a steric hindrance effect around the LEDGF/p75 binding site. In addition, we found that D77 might also affect its inhibitory action by reducing the flexibility of the region 150-167 of integrase. Through energy decomposition calculated with the Molecular Mechanics Generalized Born Surface Area approach to estimate the binding affinity, it seems likely that W131 and E170 are indispensable for the ligand binding, as characterized by the largest binding affinity. All the above results are consistent with the experimental data, providing us with some helpful information not only for the understanding of the mechanism of this kind of inhibitor but also for the rational drug design.     

Efficient magnesium-dependent human immunodeficiency virus type 1 integrase activity.

The integrase protein from human immunodeficiency virus type 1 (HIV-1) has generally been reported to require Mn2+ for efficient in vitro activity. We have reexamined the divalent metal ion requirements of HIV-1 integrase and find that the protein is capable of promoting efficient 3' processing and DNA strand transfer with either Mn2+ or Mg2+. The metal ion preference depended upon the reaction conditions. HIV-1 integrase displayed significantly less nonspecific nuclease activity in reaction mixtures containing Mg2+ than it did under the previously described reaction conditions with mixtures containing Mn2+.     

Structural insights into the retroviral DNA integration apparatus

Retroviral replication depends on successful integration of the viral genetic material into a host cell chromosome. Virally encoded integrase, an enzyme from the DDE(D) nucleotidyltransferase superfamily, is responsible for the key DNA cutting and joining steps associated with this process. Insights into the structural and mechanistic aspects of integration are directly relevant for the development of antiretroviral drugs. Recent breakthroughs have led to biochemical and structural characterization of the principal integration intermediates revealing the tetramer of integrase that catalyzes insertion of both 3' viral DNA ends into a sharply bent target DNA. This review discusses the mechanism of retroviral DNA integration and the mode of action of HIV-1 integrase strand transfer inhibitors in light of the recent visualization of the prototype foamy virus intasome, target DNA capture and strand transfer complexes.